Search Results

Search found 13331 results on 534 pages for 'fluent interface'.

Page 412/534 | < Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >

  • Backup Gmail using Mail.app and IMAP without redundancy

    - by Cawas
    I don't care for actually using mail app, I use mostly the gmail interface and mail app just for offline, for quickly reading and eventually replying. Everything is working fine, I think I've followed every guide out there... Here's a great one. But I could find nothing about avoiding redundancy. Well, I can manually do that either by using POP or by checking off most of my labels out of IMAP. But I do use a lot of labels and I often label messages with more than 1 label. And I want them on mail app. Is there anyway to make it keep just 1 copy of repeated messages? Maybe there's a message id or checksum that could be used... If there isn't a way to do it, be assured I still prefer having the extra messages and "wasting" space rather than not having any. edit: I've came across many solutions for finding duplicate files, but they just delete the files. That just make things worst: Mail will just sync it all again. I've realized it's probably better to keep two accounts setup, POP for backup and IMAP for everything else with removing the "All Mail" from it. That's because if the "All Mail" on the server is deleted for any reason, my "All Mail" local will also get deleted, while POP will keep all files regardless of the server. This doesn't solve the redundancy issue at all, but it doesn't create any new issue as well, and I can even use the search properly, without duplicated results, if I search just on the POP. So it helps optimizing a little bit. But I still think the best way to solve this issue would be having something such as aamann's Mail Scripts tweaked to hardlinking the duplicates rather than deleting, and optimized to not need to scan everything every time. I'm trying to contact him and see what we can do. At any pace, I'm still looking for an answer!

    Read the article

  • Problems with apache svn server (403 Forbidden)

    - by mrlanrat
    Iv recently setup a SVN server on my papache webserver. I installed USVN http://www.usvn.fr/ to help manage the repositories from a web interface. When I create a repository and try to import code into it from netbeans i get the following error: org.tigris.subversion.javahl.ClientException: RA layer request failed Server sent unexpected return value (403 Forbidden) in response to PROPFIND request for '/svn/python1' I know i have the username and password correct (and I have tried different users) I have done some research and it seems that it is most likely an Apache svn error. Below is the config file for this virtualhost. <VirtualHost *:80> ServerName svn.domain.com ServerAlias www.svn.domain.com ServerAlias admin.svn.domain.com DocumentRoot /home/mrlanrat/domains/svn.domain.com/usvn/public ErrorLog /var/log/virtualmin/svn.domain.com_error_log CustomLog /var/log/virtualmin/svn.domain.com_access_log combined DirectoryIndex index.html index.htm index.php index.php4 index.php5 <Directory "/home/mrlanrat/domains/svn.domain.com/usvn"> Options +SymLinksIfOwnerMatch AllowOverride All Order allow,deny Allow from all </Directory> <Location /svn/> ErrorDocument 404 default DAV svn Require valid-user SVNParentPath /home/mrlanrat/domains/svn.domain.com/usvn/files/svn SVNListParentPath on AuthType Basic AuthName "USVN" AuthUserFile /home/mrlanrat/domains/svn.domain.com/usvn/files/htpasswd AuthzSVNAccessFile /home/mrlanrat/domains/svn.domain.com/usvn/files/authz </Location> </VirtualHost> Can anyone point out what I may have done wrong and how to fix it? I have tested with changing file permissions and changing the configuration with no luck. Thanks in advance!

    Read the article

  • "Unable to open MRTG log file" error with nagios and mrtg

    - by Simone Magnaschi
    We have a strange issue with our setup of icinga / nagios and mrtg. Icinga is working great and has no problem, it can monitor basically everything without issues. We setup mrtg to gather bandwith data from our routers and switches. MRTG is working fine: it stores the log data in the /var/www/mrtg/ directory and displays the graph data via web. We assume so MRTG is doing great. We tried to setup bandwidth checks in nagios: define service{ use generic-service ; Inherit values from a template host_name zywall-agora service_description ZYWALL AGORA TRAFFICO check_command check_local_mrtgtraf!/var/www/mrtg/x.x.x.x_2.log!AVG!1000000,2000000!5000000,5000000!1000 check_interval 1 ; Check the service every 1 minute under normal conditions retry_interval 1 ; Re-check every minute until its final/hard state is determined } Where /var/www/mrtg/x.x.x.x_2.log is the correct log path file. We keep on getting Unable to open MRTG log file error in the test result in icinga web interface. We tried everything: give ownership to user nagios or icinga to the log file give chmod 777 to the file try to copy the file in another directory and give it full permission Same error. The strange thing is that if we use the command that nagios generate in a bash session the command works like a charm: /usr/lib64/nagios/plugins/check_mrtgtraf -F /var/www/mrtg/x.x.x.x_2.log -a AVG -w 10,20 -c 5000000,5000000 -e 10 Result: Traffic WARNING - Avg. In = 17.9 KB/s, Avg. Out = 5.0 KB/s|in=17.877930KB/s;10.000000;5000000.000000;0.000000 out=5.000000KB/s;20.000000;5000000.000000;0.000000 We ran that command line as root, as user nagios and as user icinga and all three worked ok. We thought that the command that nagios perform maybe has something wrong in it, so we debugged nagios but we found out that the generated command from nagios is the same as above. Searching on google for these kind of problem returns only issues of systems where mrtg is not installed or issues with the wrong path to the log file, but these seems not to be our case. We are stuck, can somebody help?

    Read the article

  • Toshiba Portege M400 screen rotation not working under Windows 7 x64

    - by Christi
    I have installed Windows 7 on my Toshiba Portege M400. This in itself was relatively tricky.* However, the button utilities aren't quite working for me. One of the buttons tries to launch the Toshiba Assist program, which doesn't appear to be available under Windows 7 for the M400, but this I can live without. More important is that the screen won't rotate as it is supposed to when you hold the "cancel" (X in a circle) button on the bezel. The PC is set to run "C:\Program Files (x860\Toshiba\Toshiba Rotation Utility\phtrot.exe". There is a "trot.exe" file in the same directory (the former appears to be to cause slightly different behaviour when rotation is done by press and hold). Neither of these programs rotates the screen either by using the buttons or from the command line. The screen is rotating normally when switching from tablet to laptop mode, so there does not appear to be an inherent problem with rotation. I'd just like to be able to use the buttons on the side of the screen to change the screen orientation. Windows XP used to have a "setrot" utility to do this, but that seems to have gone in Windows 7 Thanks for your help. *Just in case anyone comes looking for how to do this, you need to extract driver files from http://cdgenp01.csd.toshiba.com/content/support/downloads/util_raid_os2007252a.exe, which does not seem to be listed among the available files for the m400. This executable contains the SATA interface drivers that will need to be loaded by the installer before it can see your hard disk drive. It needs to be unpacked and the files copied to a USB key which they can then be loaded from in the install process. The utilities etc. for installation post windows install are all available from the Toshiba USA support website.

    Read the article

  • QoS basics on a Cisco ASA

    - by qbn
    Could someone briefly explain how to use QoS on Cisco ASA 5505? I have the basics of policing down, but what about shaping and priorities? Basically what I'm trying to do is carve out some bandwidth for my VPN subnets (in an object-group called priority-traffic). I've seen this Cisco QoS document, however configuring shaping and priority-queue don't seem to have any effects in my test. A full download of the linux kernel from kernel.org will boost a ping to a server via VPN sky high. Policing has been successful in passing this test, although it doesn't seem as efficient (I cap non-vpn traffic at 3 of my 4.5 megabits of bandwidth). Am I misunderstanding the results of the test? I think there is some simple concept I'm not grasping here. EDIT: Here is my config thus far (I have 4.5 megabits of bandwidth): access-list priority-traffic extended permit ip object-group priority-traffic any access-list priority-traffic extended permit ip any object-group priority-traffic access-list priority-traffic extended permit icmp object-group priority-traffic any access-list priority-traffic extended permit icmp any object-group priority-traffic access-list non-priority-traffic extended deny ip object-group priority-traffic any access-list non-priority-traffic extended deny ip any object-group priority-traffic access-list non-priority-traffic extended permit ip any any priority-queue outside queue-limit 440 class-map non-priority-traffic match access-list non-priority-traffic class-map priority-traffic match access-list priority-traffic class-map inspection_default match default-inspection-traffic policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp policy-map outbound-qos-policy class non-priority-traffic police input 2500000 police output 2500000 class priority-traffic priority service-policy global_policy global service-policy outbound-qos-policy interface outside

    Read the article

  • playsms sent sms to queue

    - by user512213
    i install playsms in my system as below mentioned way https://github.com/antonraharja/playSMS/wiki/Web-User-Interface-Installation i use kannel as a gateway and kannel running fine i get the following status while i check kannel status in browser. Kannel bearerbox version `1.4.3'. Build `Nov 24 2011 08:02:18', compiler `4.6.2'. System Linux, release 3.2.0-23-generic-pae, version #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012, machine i686. Hostname MSSRF-INCOIS, IP 127.0.1.1. Libxml version 2.7.8. Using OpenSSL 1.0.0e 6 Sep 2011. Compiled with MySQL 5.5.17, using MySQL 5.5.24. Using SQLite 3.7.9. Using native malloc. Status: running, uptime 0d 1h 8m 27s WDP: received 0 (0 queued), sent 0 (0 queued) SMS: received 0 (0 queued), sent 0 (0 queued), store size -1 SMS: inbound (0.00,0.00,0.00) msg/sec, outbound (0.00,0.00,0.00) msg/sec DLR: 0 queued, using internal storage Box connections: wapbox, IP 127.0.0.1 (on-line 0d 1h 8m 2s) wapbox, IP 127.0.0.1 (on-line 0d 0h 18m 11s) SMSC connections: unknown AT2[/dev/ttyS0] (online 4106s, rcvd 0, sent 0, failed 0, queued 0 msgs) But when i try to send sms in playsms means it shows "Your SMS has been delivered to queue " but sms not received .Any thing we missed out while configuration.any one advice me to proceed.

    Read the article

  • Web based KVM management for Ubuntu

    - by Tim
    Hey all, We've got a single Ubuntu 9.10 root server on which we want to run multiple KVM virtual machines. To administer these virtual machines I'd like a web based KVM management tool, but I don't know which one to choose from the list of tools mentioned on linux-kvm.org. I've used virsh & virt-manager on my desktop, but would like a web interface for the server. I tested ConVirt on my desktop, but it failed to pickup KVM machines from virsh / virt-manager, and I could not get KVM virtual machine import to work (only Xen). oVirt looks good, but I can't find out if and how I can install it on Ubuntu 9.10.. (And I'd really rather not waste another few days on testing stuff that might not work in the end.) Can anyone recommend any good web based KVM management tools that are easy to install on Ubuntu 9.10? I'm looking for something that will also allow me to run other services like apache and postgresql besides hosting virtual machines, so preferably fairly lightweight & no dedicated OS installs. We don't need any professional clustering / migration or anything, just something that will let us create, start, inspect, administer & stop virtual machines from a web page. Best regards, Tim

    Read the article

  • pros and cons with server management gui tools to manage linux web servers

    - by ajsie
    i have stumbled upon these GUI tools that could help you manage your linux server through a web interface. ebox, webmin, ispconfig, zivios, ispcp, plesk, cpanel etc. i wonder what the pros and cons are with these solutions. a lot of people is saying that they are not as good as using pure command line (ssh) to manage your server. but i think thats yet another "linux are for advanced users" talk. i agree that a lot of things may only be done with the command line by editing directly in the configuration files. but i don't really want to do that every time and for everything. especially basic configurations these could manage. its like not having phpmyadmin for managing mysql. it would be a pain in the ass right? so if one wants to throw up a web server serving a php site oneself developed and wants all the usual stuff up and running (mysql, phpmyadmin, svn, webdav etc) is these tools the right way to go? and for more advanced features, one just use the terminal like old days. is this a smart way of managing a linux server? and which one would you choose? have you used any of these and could share your thoughts about them?

    Read the article

  • TeamCity EC2 Integration via ISA Server

    - by Tim Long
    I have a TeamCity server which is actually installed on SBS 2003 Premium with ISA Server (firewall/proxy) installed. My ADSL connection has multiple IP addresses, which all resolve directly to my SBS external NIC. The NIC is therefore multi-homed and I have allocated one of the IP addresses specifically to TeamCity. In ISA, I've created an access rule to allow the traffic in. I can access my TeamCity server externally and view the web interface, that all works fine. I want to use the Amazon EC2 integration in TeamCity to launch build agents 'in the cloud'. The problem I am having is that when the agent starts, it sees the server and registers, then just sits there waiting. On the server side, the agent appears as 'disconnected'. Examining the settings, the agent's IP address appears to be that of the external NIC. What I think might be happening is that the traffic is undergoing Network Address Translation (NAT) so that TeamCity always thinks the agent is locally installed and therefore can't communicate with the actual remote agent. This seems to happen even though I have a permanent static IP address dedicated to TeamCity. So, the question is this. How can I make traffic to a specific IP address pass through the ISA server un-NATted?

    Read the article

  • How do you host multiple public facing websites on a VPS?

    - by pedroarvy
    We host about 30 websites using typical shared hosting plans using ASP.NET and SQL 2000/2005/2008. I am now wondering about hosting all of these websites using our own virtual private server. This is clearly cheaper but comes with a lot of questions I need answers to: Is the risk of having to keep this VPS server up and running worth it? Until now, the host provider has managed the server and we have not had to worry about crashes, downtime, software patches etc. We are not server administrators, we are programmers, so this is not really our expertise. On the other hand, it may not be hard to learn. When we make a website live, we log in to a domain management control panel and change the primary and secondary name servers to point to our shared web host: Eg ns1.sharedwebhost.com and ns2.sharedwebhost.com These name servers are going to have to change when we have a VPS. I don’t understand anything about how to set this up. Is there some useful info anyone could direct me to? Or is there software we need to install to make the primary and secondary name servers work on our VPS? The control panel we have for shared hosting comes with DNS management like this: http://www.yart.com.au/stackoverflow/dns.png What software would I need to install to create this for each site we host at a VPS? The control panel we have for shared hosting also comes with a POP email interface that allows email addresses to be added easily by our customers. Is this something that can be easily set up at a VPS so clients can manage their own email addresses? Is there software we need to install to make this work?

    Read the article

  • ZFS - destroying deduplicated zvol or data set stalls the server. How to recover?

    - by ewwhite
    I'm using Nexentastor on a secondary storage server running on an HP ProLiant DL180 G6 with 12 Midline (7200 RPM) SAS drives. The system has an E5620 CPU and 8GB RAM. There is no ZIL or L2ARC device. Last week, I created a 750GB sparse zvol with dedup and compression enabled to share via iSCSI to a VMWare ESX host. I then created a Windows 2008 file server image and copied ~300GB of user data to the VM. Once happy with the system, I moved the virtual machine to an NFS store on the same pool. Once up and running with my VMs on the NFS datastore, I decided to remove the original 750GB zvol. Doing so stalled the system. Access to the Nexenta web interface and NMC halted. I was eventually able to get to a raw shell. Most OS operations were fine, but the system was hanging on the zfs destroy -r vol1/filesystem command. Ugly. I found the following two OpenSolaris bugzilla entries and now understand that the machine will be bricked for an unknown period of time. It's been 14 hours, so I need a plan to be able to regain access to the server. http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6924390 and http://bugs.opensolaris.org/bugdatabase/view_bug.do;jsessionid=593704962bcbe0743d82aa339988?bug_id=6924824 In the future, I'll probably take the advice given in one of the buzilla workarounds: Workaround Do not use dedupe, and do not attempt to destroy zvols that had dedupe enabled. Update: I had to force the system to power off. Upon reboot, the system stalls at Importing zfs filesystems. It's been that way for 2 hours now.

    Read the article

  • OpenVPN and TomatoVPN

    - by Bill Johnson
    Wondering if someone can help me with the following. I have updated my Linksys router with TomatoVPN and used the following config: Interface Type:TAP Protocol:UDP Port:1195 Firewall Custom Authorization Mode:Static Key I have then inserted the static key generated in OpenVPN saved and started the service. connect.ovpn. # Use the following to have your client computer send all traffic through your router # (remote gateway) remote (entered my DNS/DHCP servers external IP address here) port 1195 dev tap secret static.key.txt proto udp comp-lzo route-gateway 192.168.1.1 redirect-gateway float I've then placed my static key in a file in the same directory as your connect.ovpn (static.key.txt) Now OpenVPN is installed on a laptop that I use at home. I have plugged in the laptop to my home connection and started connect.ovpn The Local Area Connection is connected as 'Home Network 3' - and when I start OpenVPN it is connected as 'Local Area Connection 2' and this is showing as 'Unidentified Network' and it appears there is no network access. TAP-Win32 Adapter V9 appears to be the adaptors name and the IP and DNS properties are set to automatic. If I open up the OpenVPN GUI it shows an error message saying "Connecting to connect has failed". Looking at the error message behind this pop-up one line says "TCP/UDP Socket bind failed on local address [undef]:1195 Address already in use [WSAEADDRINUSE] Could anyone possibly help me further with this please?

    Read the article

  • DrayTek 2820 configuration using public IP addresses

    - by Kev
    I have a /29 range of public IP addresses assigned to me by my ISP. I'm trying to configure a SIP VOIP handset to register with my VOIP provider who recommend using public IP addresses rather than NAT. I have a DrayTek 2820 router flashed with the latest firmware and have configured my router as per DrayTek's FAQ at: How do I use a public subnet on the LAN (non-NAT operation ) ? My IP range is: xx.xx.94.16 -> xx.xx.94.23 This gives a usable range of: xx.xx.94.17 -> xx.xx.94.22 My router's public IP address is: xx.xx.94.17, the SIP VOIP handset is allocated xx.xx.94.18. I have a second internet connection and via that I can ping the handset. However for some reason I can't seem to get it to register with the provider. I tried adding a new Firewall filter to pass through from WAN to LAN: Source: ANY, Destination: xx.xx.94.18, UDP - Ports 1024 -> 65535 Out of interest I also tried opening port 80 to see if I could browse to the phone's admin web interface but no joy. I know that my ISP aren't blocking inbound service ports because I NAT Port Forwarded port 80 to one of my internal web servers and it rendered a test page I had set up. All the NAT settings are reset to factory defaults, i.e. there are no Port Redirection, DMZ Host, Open Ports or Address Mappings configured. The handset I'm using is a GrandStream GXP-2000. Is there anything else I should be doing?

    Read the article

  • Browsing Audiobooks on an iPod Nano

    - by Electrons_Ahoy
    The sitation: I've got a stack of audiobooks in MP3 format in my iTunes library, and both an iPhone and an iPod Nano. After this question, I've changed the Media Kind for the audiobook MP3s from Music to Audiobook. This has been, overall, spectacular, as now I can resume where I was, they show up under Audiobooks, etc. On the iPhone, it's also super convenient, since the interface shows what used to be an album with multiple songs as a single book with multiple chapters, and going into "Audiobooks" presents me with a list of books, not tracks. The Nano, on the other hand, is a little strange. After changing the media type and re-syncing the ipod, the files in question are now listed under Audiobooks rather than Music, and the extra Audiobook features are present (resume playback and so on,) but the Audiobooks menu just lists all the MP3 tracks on the iPod in alphabetical order, ignoring whichever book/album they belong to - and doesn't seem to let me browse them any other way. This is, clearly, a little sub-optimal. Did I screw something up? How do I get the Nano to treat the files in a similar way to the way the iPhone and iTunes does - as books with chapters? Is there a step I missed somewhere? Do I need to reformat the iPod? Is this even possible? (Footnote: shameless bump, since this just scored me a tumbleweed.)

    Read the article

  • Adobe Acrobat Pro 9.0 on Windows 7 print to network share gives error

    - by Archit Baweja
    I've recently upgraded a client's workstations to brand new computers, with Windows 7 Professional. The server is still Windows Server 2003. The server has 2-3 file shares that get mapped to users' workstations as drives. The client has also upgraded from Acrobat 6.0 to 9.0 Pro. Since the upgrade, when the client tries to print to the Adobe PDF printer (aka convert something to PDF via the printer interface), it gives an error in the queue if the file is being saved on the network drive. If I instead provide a local path, the file "prints" fine. Additionally, if I change the Adobe PDF printer's settings to "don't spool, print directly to printer", it prints to the network share fine, but then it resets that setting every time. Things I've checked for: Permissions on the network share. The user and the computer has full access. We even gave the "Everyone" ibject full access. Reinstall Adobe Acrobat Pro 9.0 Run updates to upgrade to 9.3.4 Has anyone else bumped into such a problem? The support fellows from Adobe are just taking me around in circles. They don't seem to have a clue either.

    Read the article

  • IPCop Packet Mangling

    - by Zenham
    I've found myself in a pickle replacing an old firewall for a client this afternoon. I'm configuring their new IPCop firewall (1.4.21), Zerina OpenVPN addon is installed. What I need to do: There are three network interfaces, currently set up as red (WAN), green (LAN, 192.168.20.0/24) and orange (remote network 10.1.20.0/24). The orange interface is a direct fiber link to another organization. Simple description: Traffic and networks appear to be properly configured at this point, but I have many (150+) specific IPs on the LAN which, when accessing the resources on the 10.1.20.x network, need to be mangled to appear to be coming from the 10.1.20.0/24 network (and return traffic properly delivered). The routing on the far side was configured earlier and should be fine, but I need to redirect any packets coming across destined for those IPs to end up at their proper destination. The addressing is fixed and predictable (ie. 192.168.20.125 - 10.1.20.125). I need to insert whatever rules I have into the IPCop ruleset through /etc/rc.local I know, I'm just not sure about how I should structure this. There's CUSTOMOUTPUT and CUSTOMINPUT targets, both which currently just consist of the single rule redirecting packets to the OVPNOUTPUT/OVPNINPUT targets, so I'm guessing I should insert a rule matching outbound packets destined for the 10.1.20.x network and redirecting to a new target (maybe called TO-ORANGE) and a rule at the top of CUSTOMINPUT which redirects to a FROM-ORANGE target. Under those targets, I would have rules which do the IP matching and mangling. Am I approaching this right? If so, I'm not very familiar with mangle, and would appreciate seeing examples of how to write that source-IP rewrite. If not, how would you suggest doing this? TIA! edit: I notice additionally that the nat table has CUSTOMPREROUTING and CUSTOMPOSTROUTING targets, I guess I could alternatively post the rules in there....

    Read the article

  • Make Thundirbird use and sync with Gmail Spam facility

    - by Senthil
    I am using Thundirbird 3.1.7. I am using Gmail with it. When I mark a message as spam in Thunderbird, I want it to go to Gmail's spam folder. But it is not happening. The mail is only marked as spam and stays in Gmail's inbox. How can I setup Thunderbird so that when I mark a message as spam in thundirbird, it goes to spam folder in both Thunderbird and Gmail? FYI: I have disabled Thunderbird's own adaptive spam controls so that it doesn't interfere. I am perfectly fine with Gmail's spam facility and don't want Thunderbird to add another layer of spam filtering. Still Thunderbird doesn't send emails to Gmail's spam. Update I figured that dragging and dropping the email to the spam folder in Thunderbird does the job. But is it the same as marking the email as spam in Gmail's interface? i.e. Gmail will do stuff when you mark an email as spam so that it can filter out similar messages in the future. Does it happen when I do this drag and drop thing too? Are they the same?

    Read the article

  • MAMP - Host name changes to first vhost SSL entry for project with two localhosts

    - by user1322092
    I have two projects that are a copy of each other on my Mac with MAMP. They both have SSL pages. However, whenever I hit the a secured SSL page of project 2, the base_url or host changes to project1 instead of remaining project2. I know this is an issue with the vhosts, because if I switch the order of the entries, the reverse happens. Here's my config files: /Applications/MAMP/conf/extra/httpd-ssl.conf <VirtualHost _default_:443> DocumentRoot "/Applications/MAMP/htdocs/proj1" ServerName proj1.localhost:443 ErrorLog "/Applications/MAMP/Library/logs/error_log" TransferLog "/Applications/MAMP/Library/logs/access_log" SSLEngine on SSLCertificateFile "/Applications/MAMP/conf/apache/ssl/server.crt" SSLCertificateKeyFile "/Applications/MAMP/conf/apache/ssl/server.key" </VirtualHost> <VirtualHost _default_:443> DocumentRoot "/Applications/MAMP/htdocs/proj2" ServerName proj2.localhost:443 ErrorLog "/Applications/MAMP/Library/logs/error_log" TransferLog "/Applications/MAMP/Library/logs/access_log" SSLEngine on SSLCertificateFile "/Applications/MAMP/conf/apache/ssl/server.crt" SSLCertificateKeyFile "/Applications/MAMP/conf/apache/ssl/server.key" </VirtualHost> -------------------- cat /etc/hosts ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 127.0.0.1 proj1.localhost 127.0.0.1 proj2.localhost

    Read the article

  • Force Windows Local Subnet Traffic through a Gateway

    - by Beerey
    Hi all, We are attempting to route all traffic from a certain machine to a gateway. This works ok for traffic destined for subnets outside of the machine's subnet. However, traffic to machines in the same subnet as the source machine goes through an On-Link gateway in Windows. This means that the default gateway is ignored, and traffic in a subnet (for example, 192.168.50.10 - 192.168.50.11) flows. Destination Netmask Gateway Interface Metric 192.168.50.0 255.255.255.0 On-link 192.168.50.214 276 This route can be deleted from Windows, but when the machine is rebooted it always comes back. Adding a persistant static route to the gateway with a lower metric doesn't work, since it will still try the On-Link gateway after the persistant route fails. Adding each machine in a VLAN isn't an option due to the setup we have Adding a startup script to delete the gateway isn't a great option either, since users will have full admin access to the machine and might disable the script. We cannot transperantly intercept all network traffic on the subnet using Gratuitous ARPs or transparent proxying, since there are other machines on the subnet which use a different gateway The only way we have gotten it to work is by adding a persistant route to the gateway for the subnet traffic, and deleting the On-link route on reboot. The question is then. Is there a way to permanently remove this On-link route If not, is there a way to otherwise force even local subnet traffic to go through a gateway?

    Read the article

  • Best Firewall product for hosting/housing environment?

    - by Raffael Luthiger
    I am searching for a firewall product (appliance or software) for an hosting/housing environment. The biggest problem is that the rules get very complex as more customers are behind the firewall. Some have only one server, others have a whole subnet. Some need NAT, some a VPN endpoint. Some customers want to only allow port http, others ssh as well. So the device needs to be able to support VLANs and it should be possible to group the rules per customer. Speed is another important point. And being able to manage redundant devices easily. I am searching for something that doesn't have all the extras like spam filter etc. I was searching a lot on the net but either they had all those extras as well (and with is an overloaded configuration interface) or they missed some of the features I need (e.g. VLAN). The VPN endpoint is not the an important criteria. We were thinking about a separate machine for it.

    Read the article

  • IPv6: Can't ping anything - "Operation not permitted"

    - by Matthew Iselin
    I've been working on getting IPv6 support into my network, and had everything working properly for a short while. The server is running Ubuntu Server 8.10. Now however whenever I attempt to do anything related to IPv6 on the server, I get "Operation not permitted". This is coming from things like wide-dhcpv6-client (when trying to get an IPv6 address from the ISP) and radvd - both log errors of this type into syslog. Even pinging the loopback interface fails: xxx@gordon:~$ ping6 ::1 PING ::1(::1) 56 data bytes ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ^C --- ::1 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms xxx@gordon:~$ sudo ping6 ::1 sudo: unable to resolve host gordon PING ::1(::1) 56 data bytes ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ^C --- ::1 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms As you can see, I have attempted pinging as root, as most of the material I've found on the internet points to a permission problem. However, that has not helped. Any hints to getting unstuck would be appreciated.

    Read the article

  • PPTP Client setup, Fedora 17

    - by Suarez Romina
    I am trying to connect to hidemyass.com VPN services via PPTP, but I am having issues understanding why it isn't working, since I don't get a warning or fatal error and my IP remains the same. This is how i create the connection: [root@lasvegas-nv-datacenter ~]# pptpsetup --create TUNNELNAME --server 199.58.165.20 --username MYUSERNAME --password MYPASSWORD --encrypt --start And this is the output: Using interface ppp0 Connect: ppp0 <-- /dev/pts/1 CHAP authentication succeeded MPPE 128-bit stateless compression enabled local IP address 10.200.21.14 remote IP address 10.200.20.1 After that, I check the log and this is what i get: [root@lasvegas-nv-datacenter ~]# tail -f /var/log/messages Aug 24 11:25:33 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_rep:pptp_ctrl.c:254]: Sent control packet type is 1 'Start-Control-Connection-Request' Aug 24 11:25:33 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_disp:pptp_ctrl.c:754]: Received Start Control Connection Reply Aug 24 11:25:33 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_disp:pptp_ctrl.c:788]: Client connection established. Aug 24 11:25:34 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_rep:pptp_ctrl.c:254]: Sent control packet type is 7 'Outgoing-Call-Request' Aug 24 11:25:34 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_disp:pptp_ctrl.c:873]: Received Outgoing Call Reply. Aug 24 11:25:34 lasvegas-nv-datacenter pptp[3892]: anon log[ctrlp_disp:pptp_ctrl.c:912]: Outgoing call established (call ID 0, peer's call ID 20096). Aug 24 11:25:38 lasvegas-nv-datacenter pppd[3884]: CHAP authentication succeeded Aug 24 11:25:38 lasvegas-nv-datacenter pppd[3884]: MPPE 128-bit stateless compression enabled Aug 24 11:25:38 lasvegas-nv-datacenter pppd[3884]: local IP address 10.200.21.14 Aug 24 11:25:38 lasvegas-nv-datacenter pppd[3884]: remote IP address 10.200.20.1 Can someone help me? Basically, i Ieed to connect to the VPN and have my IP changed after the connection. I read a lot of guides but still cannot understand why I don't get a connection.

    Read the article

  • Network monitoring tools with API features

    - by Kev
    We use ks-soft's Advanced Hostmonitor package to monitor around 2000 items on our network. We think it's great, the chap that supports it is fantastic, the product is fast, stable and mature but I feel as as we grow as a company it's beginning to show some friction points in the area of integration with our back office admin systems. One of the things we'd like to do is be able to add new tests to whatever monitoring tool we use via an API. For example, when orders for servers come from our retail interface, the server gets built automatically, and as part of the automated build process we'd like to automatically add new tests to the network monitoring systems. Hostmonitor has some support for this via a feature called HM Script but we're starting to encounter some speedbumps - we can't add new operators/users we can't define new "Action Profiles" - these are the actions to be taken when a test goes good or bad. What we love about hostmonitor though are the Action Profiles. For example if a Windows IIS box goes bad our action profile for a bad test does something like: Check host again (one time) Wait another 30 seconds then test again Try restart app pool on remote machine (up to two times) Send an email to ops about the restart failure Try restarting IIS on remote machine (up to four times) Page duty admin (up to 5 times - stops after duty admin ACKS alert) Page backup duty admin (5 times - stops after duty admin ACKS alert) I'm starting to look around at other network monitoring tools and I'm looking for: a comprehensive API to be able to add/remove/control tests/test "action profiles"/operators (not just plugins, we need control and admin interfaces) the ability to have quite detailed action/escalation profiles (and define these via an API) I've looked at Nagios and Icinga but Ican't seem to glean from their documentation whether we could have these features or not, or if we could, how much work would be involved to implement/customise. Can anyone provide any advice, guidance or experiences?

    Read the article

  • Bind9 DNS help with psuedo domains

    - by Tempname
    I have setup a dns server on my home network to manage some apps that I have written for home. Currently I have 3 "domains" that I am using: controller devserver fileserver The first issue that I am having is that when I attempt to ping the parent domain of any of these 3 I am unable to. I simply get ping: unknown host controller. I however can ping any of the subdomains I have setup for these 3 parent domains. The second issue is I am unable to ping any of the 3 parent domains or any child domains from my window machines. I have verified that these domains work on other devices in my house (ipod touch, ipad, cell phone). Any help with this is greatly appreciated Here is bind data file for my parent domain controller: ; ; BIND data file for local loopback interface ; $TTL 604800 @ IN SOA controller. admin.controller. ( 9 604800 86400 2419200 604800 ) ; @ IN NS controller. @ IN A 192.168.1.104 controller IN A 192.168.1.194 admin.controller. IN A 192.168.1.104

    Read the article

  • What DBus signal is sent on system suspend?

    - by Paul Robinson
    Hello, I need to detect when a machine is going to sleep in Ubuntu 9.10 and Fedora 13. Both use UPower, so I've been looking on the "org.freedesktop.UPower" DBus bus for such signals. I've been listening for the "sleeping" signal on the UPower bus with the following command: dbus-monitor --system "type='signal',interface='org.freedesktop.UPower',member='Sleeping'" When I sleep the machine (either by closing the lid, selecting "shutdown - suspend" or sending a DBus message) I don't see a "sleeping" event. I notice that the "Sleeping" event is sent when the "org.freedesktop.UPower.AboutToSleep" method is invoked. I can do this manually by calling: dbus-send --print-reply --system --dest=org.freedesktop.UPower /org/freedesktop/UPower org.freedesktop.UPower.AboutToSleep And I notice the "sleeping" signal is fired. My understanding is that anything that sleeps the PC must send the "AboutToSleep" signal before hand. It doesn't seem like this is happening. I've tried these steps on both Fedora 13 and Ubuntu 9.10 and I see the same results. Can anyone explain what's happening or provide me with an alternative DBus signal to listen for? Many thanks, Paul

    Read the article

< Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >