Search Results

Search found 34060 results on 1363 pages for 'webpage access'.

Page 416/1363 | < Previous Page | 412 413 414 415 416 417 418 419 420 421 422 423  | Next Page >

• Iomega Home Media Network Hard Drive: Accesing the data in the disk?

  - by JJarava

  Hi all! I have an Iomega Home Media Network Hard Drive, 1TB, and lately I can't access the data on the drive. The shares (both built-in and created by me) are there, the security works, but when trying to access the data I get a "The network path was not found" message which is worrying, to say the least. I'd like to know if there is a way to get the data off the disks somehow, as some of the data in the drive (ie, pictures and videos of my 1.5 yrs old son) is hard if not impossible to find otherwise. Thanks a lot Javier

  Read the article

• setting documentroot in apache

  - by fusion

  i've set the documentroot in httpd.conf as: DocumentRoot "C:\Users\user1\Documents\WebProjects" if the files are located in WebProjects, they work; however if i create a sub folder [project] in WebProjects and access them via the browser, it doesn't load. for example, if i create a folder 'test' in WebProjects and a php file called test.php and call it: localhost/test/test.php . .this won't work and give the error of file not found on server. but if i put all the files in WebProjects itself, ie. test.php in WebProjects, it will work [localhost/test.php]. this makes my WebProjects folder look very cluttered with different files of different projects strewn around. and it isn't practical either. i'm new to using apache and hence would like to know how to set the document root such that i can access and load all the Projects/folders in WebProjects.

  Read the article

• VPN only connects to its server!

  - by Eddie

  Hi guys; Previously I bought a windows 2003 VPS and enabled routing and remote access so that users can make a vpn connection. I turend the firewall off and everything was working fine. But since 2 days ago whenever I try and connect to vpn it connects to vpn without any problem and I can see the connection status however it only connects to the server I mean what I can do with this vpn is to connect to the server via remote desktop and I can ping only the server's IP, neither I can open any webpages in browsers or ping other IP addresses beside the server one! I've also rebuilt the server and configured it for routing access and vpn connection from the beginning but it doesn't work either. It seems that server fails to route the traffic properly, as i'm sure that the firewall has been turned off I can't figure out what's the reason, any idea what's going on? Thanks in advance

  Read the article

• restore content database in sharepoint server 2007

  - by Boris

  I have a site collection set up at web app running at port 80. I have made the backup of the site collection content db using stsadm.exe tool. Now, I want to restore that backup as a new content db of a different site collection - the one set up at web app running at port 500. I have done the following: Created a backup Created new web app at port 500 (I did not create a site collection for this web app) I have removed the content db of that new web app using Central Administration I have run the stsadm.exe -o addcontentdb -url webapp-at-port-500 -databasename Command is successfully completed, however when I check the Content Database page for that web app, it says that the Number of Sites is 0! Also, when I try to open http://webapp-at-port-500, I get the error saying that the webpage cannot be found. Could anyone please help me, it's driving me crazy. Thanks.

  Read the article

• Backup Permissions for an Active Directory Profile Directory

  - by Earls

  I have Folder Redirection turned on so the profiles are on a Windows shared folder on a File and Print Server... \folders\Profiles I want to back up the entire Profiles directory, but as Domain Admin I don't seem to have the privileges to "select all and copy" the entire directory structure. The user profile subfolders (Appdata, Documents, Desktop, Pictures, etc.) throw access denied errors... I tried to grant Domain Admins full privileges to the Profiles directory and thought the subfolders would inherit the privileges, but I get access denied errors just trying to set the permissions... How can I assign a user to the Profiles directory so that I can copy the entire directory tree to back it up?

  Read the article

• Apache gives empty reply

  - by Jorge Bernal

  It happens randomly, and only on moodle installations. Apache don't add a line in the logs when this happens, and I don't know where to look. koke@escher:~/Code/eboxhq/moodle[master]$ curl -I http://training.ebox-technologies.com/login/signup.php?course=WNA001 curl: (52) Empty reply from server koke@escher:~/Code/eboxhq/moodle[master]$ curl -I http://training.ebox-technologies.com/login/signup.php?course=WNA001 HTTP/1.1 200 OK The apache conf is quite straightforward and works perfectly in the other vhosts <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /srv/apache/training.ebox-technologies.com/htdocs ServerName training.eboxhq.com ErrorLog /var/log/apache2/training.ebox-technologies.com-error.log CustomLog /var/log/apache2/training.ebox-technologies.com-access.log combined <FilesMatch "\.(ico|gif|jpe?g|png|js|css)$"> ExpiresActive On ExpiresDefault "access plus 1 week" Header add Cache-Control public </FilesMatch> </VirtualHost> Using apache 2.2.9 php 5.2.6 and moodle 1.9.5+ (Build: 20090722) Any ideas welcome :)

  Read the article

• Sharing laptop's internal optical drive running windows XP Media Center Edition with Netbook running

  - by Col

  just got a new HP netbook with no optical drive and guide said I should be able to share the optical drive of another windows computer. The netbook is running Windows 7 and the laptop, also HP, with the internal optical drive is running Windows XP Media Center Edition. I have wireless network that both the laptop and netbook access without a problem. The instructions did not seem to work in my case. When I right clicked on Properties of the optical drive and went to the Sharing tab, there was no selction for Advanced Sharing as the instructions said. XP made me go to Network wizard and set up a network, (which I already had). After doing that I could not access the drive from Windows 7. Has anyone benn able to do this?

  Read the article

• Reliable cheap or free DNS service?

  - by superwormy

  I'm looking for a reliable free or cheap DNS service. I've used FreeDNS at FreeDNS.Afraid.org in the past, but it doesn't always seem reliable... sometimes people say they can't access my website (sometimes I can't access it either) by domain name, and yet if I type in the IP address it works fine, so I assume it's some sort of DNS problem. Are there any other cheap or free DNS services out there? I need something reliable that I can manage via a web interface (or scripts if they have an API) that I can use to manage the DNS for ~100 domain names. EDIT: To be clear, I'm looking for DNS hosting, not DNS servers to use for my WAN connection.

  Read the article

• Using DNS in iproute2

  - by Oliver

  In my setup I can redirect the default gateway based on the source address. Let's say a user is connected through tun0 (10.2.0.0/16) is redirect to another vpn. That works fine! ip rule add from 10.2.0.10 lookup vpn1 In a second rule I redirect the default gateway to another gateway if the user access a certain ip adress: ip rule add from 10.2.0.10 to 94.142.154.71 lookup vpn2 If I access the page on 94.142.154.71 (myip.is) the user is correctly routed and I can see the ip of the second vpn. On any other pages the ip address of vpn1 is shown. But how do I tell iproute2 that all request at e. g. google.com should be redirected through vpn2?

  Read the article

• Tools for retrieving and modifying multi-value attributes in Microsoft ActiveDirectory

  - by Justin

  Most attributes in MSAD are single-valued and pose no problem. I am familiar with the dsquery user -samid jdoe | dsmod -webpg "http://some.url/" method. However, some attributes are multi-valued, such as telephone number and webpage. These values can be managed through the Active Directory Users & Computers Microsoft Console (dsa.msc) via the dialogue shown by clicking on the "Other..." button, but I'd really rather script the modifications. It seems to me that dsmod & dsget do not support multi-value retrieval and editing; only the first value of the set seems to be accesible. Am I correct? If I am not correct, I would appreciate a syntax example. If I am correct, would you please recommend an alternative scriptable tool that can handle multi-value attributes? The more "official and supported" the tool, the better.

  Read the article

• Getting apache to use ldap group and filesystem group information

  - by Angelo

  We have an Apache server which serves out of a particular directory, and just supplies a listing of files. From this directory, each subdirectory is owned by a certain group of users (at the filesystem level). User groups are determined by a posixGroup in ldap. Is there any simple way I can tell Apache to authorize access based on filesystem permissions, just like if the users were to access the filesystem from a shell? I would like to be able to simply add users/groups/directories without having to add another Directory or Location directive in Apache's conf?

  Read the article

• Anonymous user permission issue in SharePoint Server

  - by George2

  Hello everyone, I am using SharePoint Server 2007 x64 and Windows Server 2008 x64. I have setup a site with template publishing portal. I have grant anonymous access to all the site. My question is, if I create a new page, how to grant permission to anonymous user to access (read permission) the page? I got this confusion because, for the permission setting of a page, a permission is set according to a user name (e.g. read permission for user "foo" of a page). Since anonymous user does not have a related "user name", how could I grant read permission to anonymous user? BTW: I use Windows Forms authentication and Windows NTLM authentication for my sites. Thanks in advance, George

  Read the article

• iptables prerouting to redirect source ip address on ethernet

  - by Kevin Campion

  I have 2 ip adresses on the Internet who redirect on the same machine. On this machine, one Debian runs on OpenVZ. I can set iptables rules to redirect all http request to the Debian. iptables prerouting -d ip_address_2 DNAT --to ip_address_local_1 +--------------+ | | | V | ip_address_local_1 I| +------+ +----------+ N|ip_address_1 | |-----|Debian1 VE|-- Apache's log T|-----------------|OpenVZ| +----------+ [client ip_address_1] E| | | | R|ip_address_2 | | | N|--------------+ | | E| +------+ T| Iptables' rules : iptables -t nat -A PREROUTING -p tcp -i eth0 -d ip_address_2 --dport 80 -j DNAT --to ip_address_local_1:80 iptables -A FORWARD -p tcp -i eth0 -o venet0 -d ip_address_local_1 --dport 80 -j ACCEPT iptables -A FORWARD -p tcp -i venet0 -o eth0 -s ip_address_local_1 --sport 80 -j ACCEPT When I go to webpage with "http://ip_address_2", I can see the good content but the ip address on access log file is ip_address_1, I would like to see my ISP's ip address. Any ideas?

  Read the article

• custom route not working on windows

  - by Michael Closson

  My windows laptop is directly connected to 192.168.1.0/24 (wireless lan). I access 10.21.0.0/16 though a router that is connected to both networks. The routing works fine with this configuration. I have a VPN, that connects to 10.0.0.0/8. The VPN network doesn't actually use any IPs in the 10.21.0.0/16 range. So I should be able to configure my routing table to route all the 10.21.0.0/16 IPs through the wireless lan, and all other 10.0.0.0/8 through the VPN. My understanding is that I can do this if the metric for the 10.21.0.0 is lower than that of the 10.0.0.0. The VPN (10.0.0.0) is automatically assigned metric 20. I have manually assigned the WLAN a metric of 1. I manually add an entry to the routing table with this command: route add 10.21.0.0 mask 255.255.0.0 192.168.1.201 metric 1 The route is then assigned a metric of 2 (which is expected). The problem is that it doesn't work. I can't ping any machine on the 10.21.0.0 network. But I can access other stuff on the 10.0.0.0. I can also access stuff on the 192.168.1.0. To debug this i've done the following. Run tcpdump on the router (192.168.1.201). I can verify that no packets for 10.21.0.0 arrive on that interface. Disable iptables on the router. Disable the windows firewall. Run wireshark on my laptop, to try and see which interface the ping requests go to. But I can't see them go anywhere!! The ping command doesn't receive any 'destination unreachable' messages. Here is the relevant section of the routing table. IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.201 192.168.1.18 2 10.0.0.0 255.0.0.0 On-link 10.55.44.203 20 10.21.0.0 255.255.0.0 192.168.1.201 192.168.1.18 2

  Read the article

• Mac OS X - rmdir fails with "Operation not permitted" for a folder created by a PC on a removable dr

  - by maxint

  Hello. I have a problem (using Mac OS X 10.5.8) with the access rights of a folder that was presumably created by a virus on a disk-on-key drive when I used it with a PC. I can't remove the folder or change it's name. In Finder's Info window the Lock box is unchecked and uncheckable - if I try to check it it flips back to off. Please see the details: MaxBookAir:GARMIN'S maxint$ rmdir winamp_cache_0001/ rmdir: winamp_cache_0001/: Operation not permitted MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ mv winamp_cache_0001 test mv: rename winamp_cache_0001 to test: Operation not permitted MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ GetFileInfo winamp_cache_0001 directory: "/Volumes/GARMIN'S/winamp_cache_0001" attributes: avbstclinmedz created: 12/23/2009 14:34:52 modified: 02/13/2010 22:52:36 MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ stat -x winamp_cache_0001 File: "winamp_cache_0001" Size: 32768 FileType: Directory Mode: (0777/drwxrwxrwx) Uid: ( 502/ maxint) Gid: ( 20/ staff) Device: 14,5 Inode: 7439 Links: 1 Access: Wed Dec 23 00:00:00 2009 Modify: Sat Feb 13 22:52:36 2010 Change: Sat Feb 13 22:52:36 2010 MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ stat -r winamp_cache_0001 234881029 7439 040777 1 502 20 0 32768 1261506600 1266081756 1266081756 1261559092 131072 64 32768 winamp_cache_0001 MaxBookAir:GARMIN'S maxint$ MaxBookAir:GARMIN'S maxint$ ls -lTd winamp_cache_0001/ drwxrwxrwx 1 maxint staff 32768 Feb 13 22:52:36 2010 winamp_cache_0001/ MaxBookAir:GARMIN'S maxint$

  Read the article

• Swiching webhosting company & database erros.

  - by gipap

  Well here comes the situation. I used to have CompanyA for webhosting. (The hosting plan was a shared one). I decided to change the hosting provider and transfer my website to CompanyB, (exclusive IP). The issue that i face is that my webpage is now displayed in two different IP addresses. So i decided to turn-off the website served by the CompanyA. Now the problem is that my database driven website, served by CompanyB, is not driven anymore, although i have added the A record mssql.mywebsite.com with the ipaddress of the database. (The database is served by dedicated db's server). So, what am i doing wrong here?

  Read the article

• route lan traffic through wirless mifi

  - by Randall Blake

  I have a Windows 7 laptop accessing the internet through Verizon wireless MIFI configured as 192.168.1.1. It supports only 5 wireless connections, so I don't want to use up connections unnecessarily. That laptop has an ethernet nic which I have given a static IP of 192.168.0.5. Everything else on the 192.168.0.0 network acquires an address via DHCP from a DLink router whose address is 192.168.0.1. Also on that network are a printer, some network cameras, and a linux pc. The linux pc does not have a wireless card (and I don't want to buy one). The linux pc is located at 192.168.0.122. I can ping the linux pc from the windows pc. But I cannot access the internet from the linux pc. I can ping everything on the 192.168.0.0 network EXCEPT the ethernet card in the Windows PC. It seems as though my DLink router will not route requests to the 192.168.0.5 nic on the windows pc. My windows pc has a default route pointing to the 192.168.1.0 network. It also has a route telling it to route all traffic destined for the 192.168.0.0 network through the 192.168.0.5 interface. I have tried adding a default route to the linux pc to "gateway" 192.168.0.5, but that does not work. I have also tried adding a default route to the linux pc to the gateway 192.168.0.1 (the DLink router) but that will not give me internet access either (over the 192.168.1.0 network). I tried these two different routes at different times - I did not set them both at the same time. I suppose this is a simple problem to solve, but I cannot seem to solve it. How can I give internet access over the 192.168.1.1 MIFI to my linux pc on 192.168.0.122? Thanks EDIT: Additional Info Internet | | MIFI (192.168.1.1) (wireless) | | (192.168.1.3) (wireless) Windows 7 PC Dlink Router (192.168.0.1) ------------ (192.168.0.5) (wired) | | |linux pc (192.168.0.122) (wired) | |printer (192.168.0.100) (wireless) | |network cameras, etc (192.168.0.103) (wireless) Only the windows pc is multi-homed with a wireless nic that connects to the MIFI wirelessly, and an ethernet nic with a wired connection to the DLink router. (The DLink permits both wired and wireless connections.) I don't want to use Windows internet connection sharing because I believe it will set up the ethernet nic as a gateway on 192.168.0.1 and a DHCP server. I already have the Dlink performing that role and I don't want to change that if I do not have to. (The Dlink permits me to make DHCP reservations and I really like that feature. I don't want to lose it.)

  Read the article

• Using Static Public IPs and Private DHCP IPs on the Same Router

  - by Andrew Larsson

  I have a subnet of public IP addresses that my ISP has provided me with. They are routed through my router (how profound) that has a a static IP. I have successfully assigned the IPs from that subnet to various devices on my network. This works just fine, they get their own public IP, they can access the Internet, and the Internet can access them. However, I would like to also assign some private IPs on my network through that same router and put them behind NAT. Is this even possible? Could a VLAN be of use? I would like to avoid putting another router on the network, which makes this is quite an awkward question.

  Read the article

• how to best config for synflood setup in csf but web response still fast

  - by Binh Nguyen

  my server down random every day 4-5 time cause get high load very quick.. I have install csf and with some config server now stable.. load around 5. BUT the big isuse is : the real user very hard to access website specially from IE browser you can test at xaluan.com the flowing is config using in csf: SYNFLOOD = "1" SYNFLOOD_RATE = "100/s" SYNFLOOD_BURST = "10" CONNLIMIT = "80;30" PORTFLOOD = "80;tcp;70;5" CT_LIMIT = "29" # other config may same as default i playing around with this config for a week but still not work around.. If increase the rate SYNFLOOD_RATE = "140/s" or more.. the website response very fast.. be side have bad effect of server load increase so fast normal 20 and may be up to few hundred in peck time .. my need is response time fast but load still low.. please help thanks ps: server runing nginx frontend, apache, mysql, php ,, the home page has around 70 elements which will cached in browser in fist time access..

  Read the article

• RSync over SSH - permission denied even though the user is in the root group

  - by Bastien974

  I have a need to copy files between servers through the web. I'm using RSYNC over ssh to do so. The problem is, I need to be able to transfer files, no matter where the files is. I created a user rsync and : usermod -G root -a rsync to give him the right to read/write anywhere on both servers. During the transfer, I see this error: rsync: mkstemp "/root/.myFile.RDr2HY" failed: Permission denied (13) I don't understand what's happening. edit: I just found out that the destination folder didn't have the write access for the root group. How would I give 100% access to this rsync user ? If I change its uid to 0, rsync stop working.

  Read the article

• windows 2003 domain and windows xp

  - by ryju

  I had to move a computer account from one OU to another OU for the settings to be same as with other computers in the OU. After the computer account was moved to other domain, i reset the computer account. Now there is no domain access to this computer even using domain admin acccount. The error message is that windows cannot connect to domain because your computer account was not found.I reset the computer account again and that didnt make any difference. Local admin access was possilbe and i tried to change the computer to workgroup to join back to domain, but workgroup changing option is greyed out. Is there any way I can solve this issue. Thanks in advance.

  Read the article

• Juniper Networks SRX240 as a office router?

  - by Jordan Mendelson

  We're a small (7 person) fast growing startup who just got our new office and we're having a 100 Mbps line installed from Cogent. I'm not familiar with Juniper devices, however the equivalent Cisco appears to be rather expensive. Features we'd like: Offsite VPN access (PPTP or L2TP IPsec) - something Mac compatible IPv6 support NAT - ideally supporting multiple outside addresses mapped to VLANs DHCP DNS forwarding would be nice QoS to keep our SIP phones happy (managed through RingCentral) VLANs for guest/internal The device is going to be connected to a set of SIP phones as well as two Ruckus 7962s for wireless access. Eventually I'd like to connect it to a Juniper ESX switch as we grow. Would a Juniper SRX240 handle this ok?

  Read the article

• How to restrict Apache Location directive to cetain sub-domain?

  - by ohho

  On our server www.example.com, we use the <Location> directive to proxy traffic to a back-end server: <Location /app1> ProxyPass http://192.168.1.20 </Location> Then we added a sub-domain uat.example.com which points to the same IP address of www.example.com. We want to use it as a proxy for client to test an app being developed. Hopefully, the client can access via: http:/uat.example.com/app2_uat Now if we add a Location: <Location /app2_uat> ProxyPass http://192.168.1.30 </Location> The client can access both: http:/www.example.com/app2_uat http:/uat.example.com/app2_uat How can I restrict Location such that only: http:/uat.example.com/app2_uat is accessible? (i.e. http:/www.example.com/app2_uat should not be accessible.)

  Read the article

• Clone remote CentOS server to local test server?

  - by dannymcc

  We have a dedicated server running ContOS 5.5. The server runs our Magento store and a basic php website with mysql. I have a spare rack server in my office (HP ProLiant DL360 G4) that has more than enough storage space to store a duplicate of our dedicated server. I would like to clone the dedicated server entirely and have a local duplicate. It wouldn't need to be kept in sync because I can do that with GIT. The reason I want to do this is simple; learn more about the dedicated server and CentOS. Is this possible? I have SSH access to the dedicated server and obviously complete access to the local server.

  Read the article

• fills password and enters program automatically

  - by mark

  I am running Windows 7. In Internet Explorer 9, when I visit a webpage and enter a password it is automatically remembered. When I leave the site and return again at another time, the password is filled in automatically. I would like to stop this behavior. I do not not think that it is an auto fill problem. I think it may be related to an addon provided by my OEM and published by Authentic called "Truesuite Website Log On". How can I confirm that Truesuite is the culprit? How can I stop passwords from being filled in automatically.

  Read the article

< Previous Page | 412 413 414 415 416 417 418 419 420 421 422 423  | Next Page >