Search Results

Search found 18244 results on 730 pages for 'controller action'.

Page 417/730 | < Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >

• ASUS P5B Plus motherboard - no any drives found - how to restore RAID array?

  - by Moha

  We have a small server machine with an ASUS P5B Plus motherboard and 4 SATA HDDs. The HDDs were configured in a RAID10 array. Up until now, everything worked fine, but now the system doesn't recognize the drives. BIOS is set to RAID, jMicron controller is set to RAID, yet I can't see any of the drives in the BIOS setup, and jMicron BIOS tells me "no any drives found" The HDDs all spin up, I hear no clicking sounds or anything that would suggest HDD error. I did a search on this problem and replaced the SATA cables as suggested, but nothing's changed. What I have in mind is checking the CMOS battery and resetting the BIOS to use IDE mode, but I don't know if it will ruin the RAID system on the HDDs. It is not a critical server and there's only one database running on it (which I have backup of), but I don't want to setup the server from scratch if not necessary. What should I try to restore the RAID array and put the server back to working order?

  Read the article

• SQL2005 reporting server: intense security activity

  - by David Wimbush

  On my reporting server the Security log shows large numbers of Logon/Logoff events, often 10 or more, when you run pretty much any report in the Report Manager. Is this normal or is it a classic sign of having the wrong setup? Some system details: Windows Server 2003 R2 SP2, virtual server running under VMWare). SQL Server 2005 SP3 Standard Edition, running databases, Report Manager, and Ananlysis Services cubes. No other major services on the machine (i.e. it's not a domain controller, Exchange server or anything like that). Any ideas, please, guys?

  Read the article

• RAID 1 after install and two controlers

  - by jfreak53

  I have question regarding RAID 1. Can I setup software RAID 1 after having installed the first drive and setup ubuntu 12? I know that during server install and partitioning I can select RAID and setup then, but what I am not clear on is how in the world to setup RAID 1 after the fact? Can someone provide directions for this? Also, can I RAID 1 two drives one being 500GB and the mirror drive being 1TB? Of course the mirror drive would have a 500GB partition but that's my point. Lastly, can one drive be on IDE and the other on a SATA controller? I know speed will be an issue, that doesn't matter, I just need to know if it will work without corrupting data and if it's the same process? Thanks.

  Read the article

• Does disabling BIOS shadowing increase free RAM space?

  - by user32569

  Hi, I know in these days this is very stupid question, but for study purposes. I read that when PC starts, CPU is set to read adress just under the 4GB. There should BIOS be mapped to by memory controller. My question is, in old days, had disabling BIOS shadowing actually freed some RAM for you? I mean, even when BIOS was not shadowed to RAM directly, still adresses for BIOS MMIO access were wasted. And when you cant adress it, its like there is no extra space gained.

  Read the article

• Distributed Server Monitoring Solution

  - by MaterialEdge

  I belong to an independent IT firm that manages and maintains about 50 business clients networks, ranging from small 5 system networks to 200+ systems. Because we are unable to directly monitor each server at these locations (distributed over a very large area) on a regular basis I am looking for a method to monitor and alert us to any problems that may arise so that we can respond quickly with, hopefully, preventative measures. I'm not sure what solutions are available for this type of situation, but something that utilizes a central server at our business with all client servers sending alerts or logs to it for daily monitoring might work best. All these servers are running a Windows Server OS. In your opinion, what would be the best course of action to accomplish this?

  Read the article

• Why does a Remote Desktop Redirected Printer Doc appear every time I connect to Windows Server 2003 SBS?

  - by Jim Dagg

  I've run into a weird, persistent issue regarding a remote desktop connection. Every time I successfully log into a server running Windows Server 2003 SBS, without taking any further action, after a few seconds a print job spontaneously appears on my machine, titled "Remote Desktop Redirected Printer Doc". The document is 4K, datatype RAW, processor "WinPrint". I've heard of people running into this issue before, but can't seem to hunt down a coherent solution. It's a minor annoyance, but I get annoyed when Windows complains about a print job that, as far as I know, came from nowhere. Any thoughts on why this would occur and how I could prevent it from happening?

  Read the article

• MS project publishing to TFS web portal display

  - by denis bastarache

  So, when we initially created our MPP schedule, I made use of indends / subordinates to break down the project by the various stages of the lifecycle, which is fine... no issues there... But now that I'm trying to publish this over to TFS display, it'll only pick up the actual "action items / sub-tasks" seeing as I have resource allocation specified. So for example I have an "Analysis" phase with a few items underneath, and "System Requirements" phase with the same items, so when I publish these to TFS, it won't display the "Parent" distinction between items, so both "Tasks" instances are being published in TFS under the exact same name... So, if I can't do this Automatically, I'll likely have edit each tasks with "Analysis - Item 1", "Analysis - item 2", "SRD - Item 1", "SRD - item 2"... is there a way to do this automatically, or will have to go the manual route??

  Read the article

• Unable to Uninstall Exchange 2010 ("Internet Newsgroups" public folder)

  - by helplessITguy

  I am trying to uninstall Exchange 2010, before installing a new instance of Exchange 2010 SP1 on a different server. (Our production Exchange server is 2003) We have met all of the Mailbox uninstall prereqs except for the following: Error: Uninstall cannot continue. Database 'Public Folder Database 1579722947': The public folder database "Public Folder Database 1579722947" contains folder replicas. Before deleting the public folder database, remove the folders or move the replicas to another public folder database. For detailed instructions about how to remove a public folder database, see http://go.microsoft.com/fwlink/?linkid=81409&clcid=0x409. Recommended Action: We have been able to delete all Public Folders in the 2010 storage group except for the one (previously replicated) folder - "Internet Newsgroups". How can I delete this folder without impacting public folders on the production Exchange 2003 server? We have: verified permissions to the public folder removed replication for the folder on (on the Exch 2010 server) tried PowerShell scripts: RemoveReplicaFromPFRecursive Get-PublicFolder -Server "\" -Recurse -ResultSize:Unlimited | Remove-PublicFolder -Server -Recurse -ErrorAction:SilentlyContinue

  Read the article

• Windows 2008 Enterprise License can't activate Standard Edition

  - by starchx

  We have downloaded and installed the Windows 2008 Standard R2 edition months ago. Now the server is in production. We signed up the Microsoft Partnership Action Pack subscription last week and get a license for Windows 2008 Enterprise edtion. I am trying to activate the standard edition with Enterprise key as advsied here:http://serverfault.com/questions/318968/upgrade-domain-controller-sku-from-server-2008-r2-standard-to-enterprise , but failed. Is it because windows 2008 we have is different? (downloaded from MS site with eval license). Thanks. tim

  Read the article

• How do I put back different SCSI hard drives into their original RAID arrays across different servers?

  - by Edgar

  I have potentially a big mess in my hands: I received today a box with several hard drives that used to be connected to different servers each one of them using an unknown - at least as of right now- RAID configuration. Regretfully, these are not marked and I'm not sure how to go about putting them back into their original servers. Currently I don't have much more information: I don't know what type of array was being used on each instance and I don't have any specifics about the RAID controller originally used on each one of the servers (currently these servers are at a remote location with no easy access). Is there a way to sort through this mess? What would be the consequences of using trial and error to go about it? This might be a very basic question but I don't have much experience dealing with RAID arrays.

  Read the article

• When Exchange receives a message, send notification to another address

  - by Rick Kierner

  I have an internal Exchange 2010 server that receives no outside email and sends no email outside. I'd like to send a notification email to an outside email when a user receives a message on the internal Exchange server. This message would simply say "A Message has been sent to your XYZ Email, go check it" Theoretically, the AD would have an external email address associated with the user's AD account. I'm hoping that a process could be triggered when an email is received on this Exchange server and I could take some type of action to look up the AD account for the recipient, grab the external email address and send a standard email to that user. This would be a global rule for all Exchange accounts. The problem is that I don't know where to start. Thanks!

  Read the article

• Linux: Automatically switch to external monitor (VGA)

  - by peoro

  I've got an eeePC with a really tiny monitor, so whenever I go (home, faculty, parent's home, friend's home, ...) I attach it to any external monitor I can find. If it matters my system is like this: Archlinux Linux 2.6.36 Xorg 7.6 X server 1.9.2 Intel Corporation Mobile 945GME Express Integrated Graphics Controller (fully accelerated by intel modules) When I boot up the system, it uses the integrated monitor (LVDS1) only, and I have to manually manually switch to the external monitor (VGA1) using xrandr. Is it possible to configure my Xorg (or whatever) so that it uses the VGA1 output if present?

  Read the article

• How do I determine which HD is involved in the Event Viewer?

  - by Rod

  My PC apparently crashed before I came home from work (so my daugthers tell me; they rebooted it). The first thing I did, after it came up, was got into the Event Viewer to see what it said. Several hours before they rebooted it, there's a message in the event viewer that says: The driver detected a controller error on \Device\Harddisk5\DR5 I've no idea what that means. I got into Computer Manager, to take a look at the disks on my machine. There's only 1 hard drive, and a few slots for microSD, etc, but none of them are labeled "Harddisk5", nor is there anything there labeled "DR5". How do I determine what, if anything, those are? Could they be USB drives that my daughters used?

  Read the article

• How to identify RAID (5 or 6) controllers that allow dynamic resize of the array

  - by David Pfeffer

  I'm building a server with a RAID5 array, based on a hardware controller. I want to be able to later add additional disks and have the array rebalance across all of the disks, enlarging the usable size. I also want to be able to later upgrade to bigger disks (one at a time, of course) and then expand the array to fill the entire drive. These features are available in Linux software raid (md). I've also heard they're available in some hardware controllers. Currently, I own the Adaptec RAID 3805 card and the 3ware 9650se card. I'd prefer to use the Adaptec if possible, but I can't find if either of these cards offer this feature. If they don't, are there other affordable (read as: sub-$600) RAID cards available that can accomplish this?

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, I am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now I get this error when I try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do I need to change in order my win xp join the domain

  Read the article

• windows 2008 R2 TS printer security - can't take owership

  - by Ian

  I have a Windows 2008 R2 server with Terminal server role installed. I'm seeing a problem with an ordinary user who is member of local printer operators group on the server. If the user opens a cmd window using ‘run as administrator’ they can run printmanager.msc without needing to enter their password again. In printmanager they can change the ownership of redirected (easy print) printers without problems. If, from the same cmd window, they use subinacl to try and change the onwership of the queue to themselves they get access denied: >subinacl.exe /printer "_#MyPrinter (2 redirected)" /setowner="MyDom\MyUsr" Elapsed Time: 00 00:00:00 Done: 1, Modified 0, Failed 1, Syntax errors 0 Last Done : _#MyPrinter (2 redirected) Last Failed: _#MyPrinter (2 redirected) - OpenPrinter Error : 5 Access denied so, same context, same action but one works and one doesn't. Any ideas for this odd behaviour? I'm using subinacl x86 on an x64 server as I can't find anything more up to date. I've tried with icacls and others but couldn't get them to do anything with printers.

  Read the article

• Domain users sometimes cannot access our NAS

  - by Natalie

  I'm using a QNAP TS-410 Turbo NAS and I've got domain users connecting to it frequently everyday. However, there are times when their connection to the NAS will seem to just drop and, suddenly, they cannot access their network drives (which I had set up our Domain Controller to automatically map to folders on the NAS). Could you please tell me what may cause this? I don't think it is a network issue as everything else seems to work just fine. (If more details are needed, please let me know so I can update this question.)

  Read the article

• How do I turn off the click sound when closing a tab in chrome?

  - by nos

  Every time I close a tab in Chrome, it makes a click sound. How do I turn off that sound? I reported that issue back in Oct 2010. The problem doesn't appear on all clients and the reason is still unclear. Common attempts at solving the issue include simply turning off the sound in Windows. But I would prefer to solve the problem at the source. Why is Chrome even triggering that sound to be played? And why is it delayed? The problem would be far less annoying if the sound could easily be related to the action taken. Installing the Chrome Toolbox and muting all tabs has no effect on this issue. When switching to a different Chrome user profile, the new user profile does exhibit the same issue.

  Read the article

• PackageForTheWeb "should not be executed directly"

  - by Sergei Ousynin

  When trying to install package (specifically, chipset drivers for Nexcom PEAK-series computer, but I guess it doesn't really matters) I get "PackageForTheWeb Error" saing "This program is used internally by PackageFromTheWeb. It should not be executed directly." I get this error on both Windows 2000 (where it should be installed) and Windows 7. The original driver CD was lost long time ago, so the package was downloaded from the Nexcom website, found no info about installer prerequisites there. What should I install (or anything else) to install this package? UPD: I found a solution - unpacked the package and executed setup.exe that was inside. But I'm pretty sure it's not an action supposed by vendor, so answers are still welcome.

  Read the article

• Setup local EC2 style cloud?

  - by John Kramlich

  I was recently given 3 dual opteron 2400 servers with 4GB of RAM and 120GB hard drives. I am interested in setting up something similar to Amazon's EC2 for my own personal web development use. Basically, I would like to spin up instances from an ISO or other disk images and have them available to test and develop software. Are there open source solutions I can use to accomplish this? I am assuming one of the machines will need to act as a controller of some sort for the other two. I use Sun's VirtualBox on my local development machine to virtualize various versions of Microsoft Windows. However, I'm not sure if that's the best tool for what I am trying to achieve. I apologize in advance if this question is to vague to get meaningful responses. I am new to cloud computing and fairly new at server administration.

  Read the article

• Database or website of kernel config files ?

  - by Kami

  I've experienced some kernel panic after trying to compile gentoo kernel for a Sun UltraSPARC T5120 Server. The kernel panic came from a missing support for the SAS disk controller in the menu config. I've wasted so much time because I had no clue about the hardware I was using. I know that the kernel config depends on what you plan to do with your machine but I want to have a configuration file that at least match my hardware ! Is there a website or database that provides menuconfig's kernel configuration files for known or branded hardware like Dell Server or Apple computers ?

  Read the article

• How to move an existing Win7 setup to a RAID-1 array?

  - by Matthew Scharley

  Currently I have a the following setup: Drive A/B: Identical HDD's Drive C: 2TB external drive with plenty of space currently. Hardware RAID controller Currently I have Drive A which is my boot drive (Win7), and Drive C which is a data drive, and Drive B which I only recently received and is blank. What is the best way of moving off of Drive A, setting up the hardware RAID and then migrating my data back onto the RAID array? I'm proficient with Linux, but I'm not sure if I can get away with simply using dd here. There is currently enough free space on Drive C to take 5-6 copies of a disk image of Drive A, so space isn't an issue.

  Read the article

• Invalid command 'VirtualDocumentRoot'

  - by andy

  I'm unsure as to why I'm getting the following error when apache is rebooted: Invalid command 'VirtualDocumentRoot', perhaps misspelled or defined by a module not included in the server configuration Action 'start' failed. The snippet it is referring to is this: <VirtualHost *:80> ServerAdmin [email protected] VirtualDocumentRoot /local/www/staging/%1 ServerAlias *.staging.mydomain.com </VirtualHost> I assumed it was a misspelling as it said, but it was copied directly from another server of mine. It works perfect there. Any ideas?

  Read the article

• Custom command in right-click menu not working

  - by Luke

  I have added, via the registry, a right click menu option for all filetypes which is supposed to get the MD5 checksum for a file. HKEY_CLASSES_ROOT*\shell\Checksum - Default: Get Checksum and HKEY_CLASSES_ROOT*\shell\Checksum\command - Default: checksum.cmd "%1" checksum.cmd simply clears the screen, calls fciv.exe using %1 and then pauses. Unfortunately, whilst the option "Get Checksum" appears correctly in the right click menu, it doesn't perform the right action when clicked. When I click it an "Open With" dialog opens, which is of course not what I want. Both checksum.cmd and fciv.exe are in the PATH. checksum.cmd: @echo off cls fciv.exe %1 pause Anybody know what's going on?

  Read the article

• Highly robust and scalable search server needed for managing and analyze files

  - by ChrisBenyamin

  Hi everybody, I am looking for a professional search server system with functionality, like e.g. solr http://lucene.apache.org/solr/ holds. Place of action should be a centralized location, whereon many hosts would request data. Furthermore the system should be extensible for implementing statistical procedures. (e.g. a kind of heatmap (or common diagrams) of a (or more) file(s) (which has a guid), that is spread on different hosts.) This software doesn't have to be opensource. thanks. chris

  Read the article

< Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >