Search Results

Search found 30220 results on 1209 pages for 'connection problems'.

Page 42/1209 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • internet sharing over wifi between ubuntu 11.10 and windows7

    - by Vivek Pradhan
    So i have looked up a lot of forums for these solution but haven't really found one that works. I have a laptop running ubuntu 11.10 connected to the ethernet cord at home and i want to share the internet over wifi with my friend's laptop running windows7. I did not think it would be so difficult, I tried a lot of things: I went to networks and then wireless and set up a wifi hotspot, my laptop got connected to it and the ipv4 was set to "shared to other computers". Thankfully the network was discoverable and after some tries my friend was able to connect to the network, but it still showed that there was no internet access. I tried coniguring the tcp addresses of the wifi on his laptop. Bottom line: did not work. I went to the network manager, clicked on create a new wireless network, created one with security WEP 40/128 bit passphrase, tried the other 2 options later, and did the same thing as with the wifi, this network was also not discoverable initially and after some tries, we could connect to it but then ICS was not working although there was a working internet on my ubuntu laptop. I would really appreciate if some one who has faced a similar problem and got it fixed to please give me a step by step solution of how to get this work, because this is a prety common problem with ubuntu distros I have noticed. Note: This however seems to work with ubuntu to ubuntu connections, but specifically cross OS connections like windows or my phone running android ICS are not able to see or if connect not able to share internet on my laptop

    Read the article

  • Playing Age of Empires II multiplayer in VirtualBox Over wi fi network

    - by Gaurav_Java
    I installed Age of Empires II (Expansion) in VirtualBox (hosting Windows XP). It works great in single player mode. Unfortunately, I tried playing multiplayer via WI-FI which I created on my Ubuntu machine and can't seem to join games. But when I connected to my WI-FI router other able to connect to my system and we can play multiplayer mode This is what I've done so far to try to resolve the issue: I noticed that the IP address of my virtual machine was 10.0.x.x, While the local IP on Ubuntu is 192.168.x.x, which I figured was a Problem. So I changed from NAT networking to bridged networking in VirtualBox . I turned off the Windows firewall in the virtual machine and don't have any ports blocked by Ubuntu, so no software firewall should be at fault. However I'm still unable to play multiplayer games, and suspect that some kind of networking issue lies at the heart of the problem. I'm not sure what else I would need to change, however. So essentially I was wondering if anyone else here has managed to play AOE2, or any similar game, inside VirtualBox from Ubuntu, and if so what you needed to do to make it possible. Or if anyone has suggestions on where else to look to figure out the problem, I'd appreciate that as well. Unfortunately AOE2 itself doesn't provide any debugging information to troubleshoot the inability to connect to network games. Here MY IP result both for Ubuntu and Virtualbox XP I want to play game on multiplayer mode in virtualbox on my system(Own Created on Ubuntu ) wi-fi on which other can connect and play hope someone will answer this

    Read the article

  • Why won't my Internet stay connected?

    - by Aubrey
    I recently updated to Ubuntu 12.04, from Ubuntu 10.04, and my Internet, USB760 Novetel Verizon-Wireless Mobile Broadband, will connect after a minute of me starting the computer up. But after a while it will disconnect and the only way to reconnect it is to restart the computer. Even then, sometimes it won't work. I've also noticed that since I've upgraded the computer, the computer will randomly enter into Power Save mode, and then it will tell me to log back in. I've done nothing to provoke it, other than using the Internet. I was wondering, could the entering into Power Save mode and the Internet disconnecting be somehow connected? I've updated the computer every time it asks me to do so, but it doesn't seem to be helping. If Ubuntu 10.04 would still be supported by next year, I would downgrade. But I have no other choice than to stick with 12.04. Any help would be greatly appreciated! Thanks!

    Read the article

  • Does the Ubuntu One sync work?

    - by bisi
    I have been on this for several hours now, trying to get a simple second folder to sync with my (paid) account. I cannot tell you how many times I removed all devices, removed stored passwords, killed all processes of u1, logged out and back in online...and still, the tick in the file browser (Synchronize this folder) is loading and loading and loading. Also, I have logged out, rebooted countless times. And this is after me somehow managing to get the u1 preferences to finally "connect" again. I have also checked the status of your services, and none are close to what I am experiencing. And I have checked the suggested related questions above! So please, just confirm whether it is a problem on my side, or a problem on your side.

    Read the article

  • Reasoner Conversion Problems:

    - by Annalyne
    I have this code right here in Java and I wanted to translate it in C++, but I had some problems going: this is the java code: import java.io.*; import java.util.*; public class ClueReasoner { private int numPlayers; private int playerNum; private int numCards; private SATSolver solver; private String caseFile = "cf"; private String[] players = {"sc", "mu", "wh", "gr", "pe", "pl"}; private String[] suspects = {"mu", "pl", "gr", "pe", "sc", "wh"}; private String[] weapons = {"kn", "ca", "re", "ro", "pi", "wr"}; private String[] rooms = {"ha", "lo", "di", "ki", "ba", "co", "bi", "li", "st"}; private String[] cards; public ClueReasoner() { numPlayers = players.length; // Initialize card info cards = new String[suspects.length + weapons.length + rooms.length]; int i = 0; for (String card : suspects) cards[i++] = card; for (String card : weapons) cards[i++] = card; for (String card : rooms) cards[i++] = card; numCards = i; // Initialize solver solver = new SATSolver(); addInitialClauses(); } private int getPlayerNum(String player) { if (player.equals(caseFile)) return numPlayers; for (int i = 0; i < numPlayers; i++) if (player.equals(players[i])) return i; System.out.println("Illegal player: " + player); return -1; } private int getCardNum(String card) { for (int i = 0; i < numCards; i++) if (card.equals(cards[i])) return i; System.out.println("Illegal card: " + card); return -1; } private int getPairNum(String player, String card) { return getPairNum(getPlayerNum(player), getCardNum(card)); } private int getPairNum(int playerNum, int cardNum) { return playerNum * numCards + cardNum + 1; } public void addInitialClauses() { // TO BE IMPLEMENTED AS AN EXERCISE // Each card is in at least one place (including case file). for (int c = 0; c < numCards; c++) { int[] clause = new int[numPlayers + 1]; for (int p = 0; p <= numPlayers; p++) clause[p] = getPairNum(p, c); solver.addClause(clause); } // If a card is one place, it cannot be in another place. // At least one card of each category is in the case file. // No two cards in each category can both be in the case file. } public void hand(String player, String[] cards) { playerNum = getPlayerNum(player); // TO BE IMPLEMENTED AS AN EXERCISE } public void suggest(String suggester, String card1, String card2, String card3, String refuter, String cardShown) { // TO BE IMPLEMENTED AS AN EXERCISE } public void accuse(String accuser, String card1, String card2, String card3, boolean isCorrect) { // TO BE IMPLEMENTED AS AN EXERCISE } public int query(String player, String card) { return solver.testLiteral(getPairNum(player, card)); } public String queryString(int returnCode) { if (returnCode == SATSolver.TRUE) return "Y"; else if (returnCode == SATSolver.FALSE) return "n"; else return "-"; } public void printNotepad() { PrintStream out = System.out; for (String player : players) out.print("\t" + player); out.println("\t" + caseFile); for (String card : cards) { out.print(card + "\t"); for (String player : players) out.print(queryString(query(player, card)) + "\t"); out.println(queryString(query(caseFile, card))); } } public static void main(String[] args) { ClueReasoner cr = new ClueReasoner(); String[] myCards = {"wh", "li", "st"}; cr.hand("sc", myCards); cr.suggest("sc", "sc", "ro", "lo", "mu", "sc"); cr.suggest("mu", "pe", "pi", "di", "pe", null); cr.suggest("wh", "mu", "re", "ba", "pe", null); cr.suggest("gr", "wh", "kn", "ba", "pl", null); cr.suggest("pe", "gr", "ca", "di", "wh", null); cr.suggest("pl", "wh", "wr", "st", "sc", "wh"); cr.suggest("sc", "pl", "ro", "co", "mu", "pl"); cr.suggest("mu", "pe", "ro", "ba", "wh", null); cr.suggest("wh", "mu", "ca", "st", "gr", null); cr.suggest("gr", "pe", "kn", "di", "pe", null); cr.suggest("pe", "mu", "pi", "di", "pl", null); cr.suggest("pl", "gr", "kn", "co", "wh", null); cr.suggest("sc", "pe", "kn", "lo", "mu", "lo"); cr.suggest("mu", "pe", "kn", "di", "wh", null); cr.suggest("wh", "pe", "wr", "ha", "gr", null); cr.suggest("gr", "wh", "pi", "co", "pl", null); cr.suggest("pe", "sc", "pi", "ha", "mu", null); cr.suggest("pl", "pe", "pi", "ba", null, null); cr.suggest("sc", "wh", "pi", "ha", "pe", "ha"); cr.suggest("wh", "pe", "pi", "ha", "pe", null); cr.suggest("pe", "pe", "pi", "ha", null, null); cr.suggest("sc", "gr", "pi", "st", "wh", "gr"); cr.suggest("mu", "pe", "pi", "ba", "pl", null); cr.suggest("wh", "pe", "pi", "st", "sc", "st"); cr.suggest("gr", "wh", "pi", "st", "sc", "wh"); cr.suggest("pe", "wh", "pi", "st", "sc", "wh"); cr.suggest("pl", "pe", "pi", "ki", "gr", null); cr.printNotepad(); cr.accuse("sc", "pe", "pi", "bi", true); } } how can I convert this? there are too many errors I get. for my C++ code (as a commentor asked for) #include <iostream> #include <cstdlib> #include <string> using namespace std; void Scene_Reasoner() { int numPlayer; int playerNum; int cardNum; string filecase = "Case: "; string players [] = {"sc", "mu", "wh", "gr", "pe", "pl"}; string suspects [] = {"mu", "pl", "gr", "pe", "sc", "wh"}; string weapons [] = {"kn", "ca", "re", "ro", "pi", "wr"}; string rooms[] = {"ha", "lo", "di", "ki", "ba", "co", "bi", "li", "st"}; string cards [0]; }; void Scene_Reason_Base () { numPlayer = players.length; // Initialize card info cards = new String[suspects.length + weapons.length + rooms.length]; int i = 0; for (String card : suspects) cards[i++] = card; for (String card : weapons) cards[i++] = card; for (String card : rooms) cards[i++] = card; cardNum = i; }; private int getCardNum (string card) { for (int i = 0; i < numCards; i++) if (card.equals(cards[i])) return i; cout << "Illegal card: " + card <<endl; return -1; }; private int getPairNum(String player, String card) { return getPairNum(getPlayerNum(player), getCardNum(card)); }; private int getPairNum(int playerNum, int cardNum) { return playerNum * numCards + cardNum + 1; }; int main () { return 0; }

    Read the article

  • Solving Big Problems with Oracle R Enterprise, Part II

    - by dbayard
    Part II – Solving Big Problems with Oracle R Enterprise In the first post in this series (see https://blogs.oracle.com/R/entry/solving_big_problems_with_oracle), we showed how you can use R to perform historical rate of return calculations against investment data sourced from a spreadsheet.  We demonstrated the calculations against sample data for a small set of accounts.  While this worked fine, in the real-world the problem is much bigger because the amount of data is much bigger.  So much bigger that our approach in the previous post won’t scale to meet the real-world needs. From our previous post, here are the challenges we need to conquer: The actual data that needs to be used lives in a database, not in a spreadsheet The actual data is much, much bigger- too big to fit into the normal R memory space and too big to want to move across the network The overall process needs to run fast- much faster than a single processor The actual data needs to be kept secured- another reason to not want to move it from the database and across the network And the process of calculating the IRR needs to be integrated together with other database ETL activities, so that IRR’s can be calculated as part of the data warehouse refresh processes In this post, we will show how we moved from sample data environment to working with full-scale data.  This post is based on actual work we did for a financial services customer during a recent proof-of-concept. Getting started with the Database At this point, we have some sample data and our IRR function.  We were at a similar point in our customer proof-of-concept exercise- we had sample data but we did not have the full customer data yet.  So our database was empty.  But, this was easily rectified by leveraging the transparency features of Oracle R Enterprise (see https://blogs.oracle.com/R/entry/analyzing_big_data_using_the).  The following code shows how we took our sample data SimpleMWRRData and easily turned it into a new Oracle database table called IRR_DATA via ore.create().  The code also shows how we can access the database table IRR_DATA as if it was a normal R data.frame named IRR_DATA. If we go to sql*plus, we can also check out our new IRR_DATA table: At this point, we now have our sample data loaded in the database as a normal Oracle table called IRR_DATA.  So, we now proceeded to test our R function working with database data. As our first test, we retrieved the data from a single account from the IRR_DATA table, pull it into local R memory, then call our IRR function.  This worked.  No SQL coding required! Going from Crawling to Walking Now that we have shown using our R code with database-resident data for a single account, we wanted to experiment with doing this for multiple accounts.  In other words, we wanted to implement the split-apply-combine technique we discussed in our first post in this series.  Fortunately, Oracle R Enterprise provides a very scalable way to do this with a function called ore.groupApply().  You can read more about ore.groupApply() here: https://blogs.oracle.com/R/entry/analyzing_big_data_using_the1 Here is an example of how we ask ORE to take our IRR_DATA table in the database, split it by the ACCOUNT column, apply a function that calls our SimpleMWRR() calculation, and then combine the results. (If you are following along at home, be sure to have installed our myIRR package on your database server via  “R CMD INSTALL myIRR”). The interesting thing about ore.groupApply is that the calculation is not actually performed in my desktop R environment from which I am running.  What actually happens is that ore.groupApply uses the Oracle database to perform the work.  And the Oracle database is what actually splits the IRR_DATA table by ACCOUNT.  Then the Oracle database takes the data for each account and sends it to an embedded R engine running on the database server to apply our R function.  Then the Oracle database combines all the individual results from the calls to the R function. This is significant because now the embedded R engine only needs to deal with the data for a single account at a time.  Regardless of whether we have 20 accounts or 1 million accounts or more, the R engine that performs the calculation does not care.  Given that normal R has a finite amount of memory to hold data, the ore.groupApply approach overcomes the R memory scalability problem since we only need to fit the data from a single account in R memory (not all of the data for all of the accounts). Additionally, the IRR_DATA does not need to be sent from the database to my desktop R program.  Even though I am invoking ore.groupApply from my desktop R program, because the actual SimpleMWRR calculation is run by the embedded R engine on the database server, the IRR_DATA does not need to leave the database server- this is both a performance benefit because network transmission of large amounts of data take time and a security benefit because it is harder to protect private data once you start shipping around your intranet. Another benefit, which we will discuss in a few paragraphs, is the ability to leverage Oracle database parallelism to run these calculations for dozens of accounts at once. From Walking to Running ore.groupApply is rather nice, but it still has the drawback that I run this from a desktop R instance.  This is not ideal for integrating into typical operational processes like nightly data warehouse refreshes or monthly statement generation.  But, this is not an issue for ORE.  Oracle R Enterprise lets us run this from the database using regular SQL, which is easily integrated into standard operations.  That is extremely exciting and the way we actually did these calculations in the customer proof. As part of Oracle R Enterprise, it provides a SQL equivalent to ore.groupApply which it refers to as “rqGroupEval”.  To use rqGroupEval via SQL, there is a bit of simple setup needed.  Basically, the Oracle Database needs to know the structure of the input table and the grouping column, which we are able to define using the database’s pipeline table function mechanisms. Here is the setup script: At this point, our initial setup of rqGroupEval is done for the IRR_DATA table.  The next step is to define our R function to the database.  We do that via a call to ORE’s rqScriptCreate. Now we can test it.  The SQL you use to run rqGroupEval uses the Oracle database pipeline table function syntax.  The first argument to irr_dataGroupEval is a cursor defining our input.  You can add additional where clauses and subqueries to this cursor as appropriate.  The second argument is any additional inputs to the R function.  The third argument is the text of a dummy select statement.  The dummy select statement is used by the database to identify the columns and datatypes to expect the R function to return.  The fourth argument is the column of the input table to split/group by.  The final argument is the name of the R function as you defined it when you called rqScriptCreate(). The Real-World Results In our real customer proof-of-concept, we had more sophisticated calculation requirements than shown in this simplified blog example.  For instance, we had to perform the rate of return calculations for 5 separate time periods, so the R code was enhanced to do so.  In addition, some accounts needed a time-weighted rate of return to be calculated, so we extended our approach and added an R function to do that.  And finally, there were also a few more real-world data irregularities that we needed to account for, so we added logic to our R functions to deal with those exceptions.  For the full-scale customer test, we loaded the customer data onto a Half-Rack Exadata X2-2 Database Machine.  As our half-rack had 48 physical cores (and 96 threads if you consider hyperthreading), we wanted to take advantage of that CPU horsepower to speed up our calculations.  To do so with ORE, it is as simple as leveraging the Oracle Database Parallel Query features.  Let’s look at the SQL used in the customer proof: Notice that we use a parallel hint on the cursor that is the input to our rqGroupEval function.  That is all we need to do to enable Oracle to use parallel R engines. Here are a few screenshots of what this SQL looked like in the Real-Time SQL Monitor when we ran this during the proof of concept (hint: you might need to right-click on these images to be able to view the images full-screen to see the entire image): From the above, you can notice a few things (numbers 1 thru 5 below correspond with highlighted numbers on the images above.  You may need to right click on the above images and view the images full-screen to see the entire image): The SQL completed in 110 seconds (1.8minutes) We calculated rate of returns for 5 time periods for each of 911k accounts (the number of actual rows returned by the IRRSTAGEGROUPEVAL operation) We accessed 103m rows of detailed cash flow/market value data (the number of actual rows returned by the IRR_STAGE2 operation) We ran with 72 degrees of parallelism spread across 4 database servers Most of our 110seconds was spent in the “External Procedure call” event On average, we performed 8,200 executions of our R function per second (110s/911k accounts) On average, each execution was passed 110 rows of data (103m detail rows/911k accounts) On average, we did 41,000 single time period rate of return calculations per second (each of the 8,200 executions of our R function did rate of return calculations for 5 time periods) On average, we processed over 900,000 rows of database data in R per second (103m detail rows/110s) R + Oracle R Enterprise: Best of R + Best of Oracle Database This blog post series started by describing a real customer problem: how to perform a lot of calculations on a lot of data in a short period of time.  While standard R proved to be a very good fit for writing the necessary calculations, the challenge of working with a lot of data in a short period of time remained. This blog post series showed how Oracle R Enterprise enables R to be used in conjunction with the Oracle Database to overcome the data volume and performance issues (as well as simplifying the operations and security issues).  It also showed that we could calculate 5 time periods of rate of returns for almost a million individual accounts in less than 2 minutes. In a future post, we will take the same R function and show how Oracle R Connector for Hadoop can be used in the Hadoop world.  In that next post, instead of having our data in an Oracle database, our data will live in Hadoop and we will how to use the Oracle R Connector for Hadoop and other Oracle Big Data Connectors to move data between Hadoop, R, and the Oracle Database easily.

    Read the article

  • Common Live Upgrade problems

    - by user12611829
    As I have worked with customers deploying Live Upgrade in their environments, several problems seem to surface over and over. With this blog article, I will try to collect these troubles, as well as suggest some workarounds. If this sounds like the beginnings of a Wiki, you would be right. At present, there is not enough material for one, so we will use this blog for the time being. I do expect new material to be posted on occasion, so if you wish to bookmark it for future reference, a permanent link can be found here. Live Upgrade copies over ZFS root clone This was introduced in Solaris 10 10/09 (u8) and the root of the problem is a duplicate entry in the source boot environments ICF configuration file. Prior to u8, a ZFS root file system was not included in /etc/vfstab, since the mount is implicit at boot time. Starting with u8, the root file system is included in /etc/vfstab, and when the boot environment is scanned to create the ICF file, a duplicate entry is recorded. Here's what the error looks like. # lucreate -n s10u9-baseline Checking GRUB menu... System has findroot enabled GRUB Analyzing system configuration. Comparing source boot environment file systems with the file system(s) you specified for the new boot environment. Determining which file systems should be in the new boot environment. Updating boot environment description database on all BEs. Updating system configuration files. Creating configuration for boot environment . Source boot environment is . Creating boot environment . Creating file systems on boot environment . Creating file system for in zone on . The error indicator ----- /usr/lib/lu/lumkfs: test: unknown operator zfs Populating file systems on boot environment . Checking selection integrity. Integrity check OK. Populating contents of mount point . This should not happen ------ Copying. Ctrl-C and cleanup If you weren't paying close attention, you might not even know this is an error. The symptoms are lucreate times that are way too long due to the extraneous copy, or the one that alerted me to the problem, the root file system is filling up - again thanks to a redundant copy. This problem has already been identified and corrected, and a patch (121431-58 or later for x86, 121430-57 for SPARC) is available. Unfortunately, this patch has not yet made it into the Solaris 10 Recommended Patch Cluster. Applying the prerequisite patches from the latest cluster is a recommendation from the Live Upgrade Survival Guide blog, so an additional step will be required until the patch is included. Let's see how this works. # patchadd -p | grep 121431 Patch: 121429-13 Obsoletes: Requires: 120236-01 121431-16 Incompatibles: Packages: SUNWluzone Patch: 121431-54 Obsoletes: 121436-05 121438-02 Requires: Incompatibles: Packages: SUNWlucfg SUNWluu SUNWlur # unzip 121431-58 # patchadd 121431-58 Validating patches... Loading patches installed on the system... Done! Loading patches requested to install. Done! Checking patches that you specified for installation. Done! Approved patches will be installed in this order: 121431-58 Checking installed patches... Executing prepatch script... Installing patch packages... Patch 121431-58 has been successfully installed. See /var/sadm/patch/121431-58/log for details Executing postpatch script... Patch packages installed: SUNWlucfg SUNWlur SUNWluu # lucreate -n s10u9-baseline Checking GRUB menu... System has findroot enabled GRUB Analyzing system configuration. INFORMATION: Unable to determine size or capacity of slice . Comparing source boot environment file systems with the file system(s) you specified for the new boot environment. Determining which file systems should be in the new boot environment. INFORMATION: Unable to determine size or capacity of slice . Updating boot environment description database on all BEs. Updating system configuration files. Creating configuration for boot environment . Source boot environment is . Creating boot environment . Cloning file systems from boot environment to create boot environment . Creating snapshot for on . Creating clone for on . Setting canmount=noauto for in zone on . Saving existing file in top level dataset for BE as //boot/grub/menu.lst.prev. Saving existing file in top level dataset for BE as //boot/grub/menu.lst.prev. Saving existing file in top level dataset for BE as //boot/grub/menu.lst.prev. File propagation successful Copied GRUB menu from PBE to ABE No entry for BE in GRUB menu Population of boot environment successful. Creation of boot environment successful. This time it took just a few seconds. A cursory examination of the offending ICF file (/etc/lu/ICF.3 in this case) shows that the duplicate root file system entry is now gone. # cat /etc/lu/ICF.3 s10u8-baseline:-:/dev/zvol/dsk/panroot/swap:swap:8388608 s10u8-baseline:/:panroot/ROOT/s10u8-baseline:zfs:0 s10u8-baseline:/vbox:pandora/vbox:zfs:0 s10u8-baseline:/setup:pandora/setup:zfs:0 s10u8-baseline:/export:pandora/export:zfs:0 s10u8-baseline:/pandora:pandora:zfs:0 s10u8-baseline:/panroot:panroot:zfs:0 s10u8-baseline:/workshop:pandora/workshop:zfs:0 s10u8-baseline:/export/iso:pandora/iso:zfs:0 s10u8-baseline:/export/home:pandora/home:zfs:0 s10u8-baseline:/vbox/HardDisks:pandora/vbox/HardDisks:zfs:0 s10u8-baseline:/vbox/HardDisks/WinXP:pandora/vbox/HardDisks/WinXP:zfs:0 Solaris 10 9/10 introduces new autoregistration file This one is actually mentioned in the Oracle Solaris 9/10 release notes. I know, I hate it when that happens too. Here's what the "error" looks like. # luupgrade -u -s /mnt -n s10u9-baseline System has findroot enabled GRUB No entry for BE in GRUB menu Copying failsafe kernel from media. 61364 blocks miniroot filesystem is Mounting miniroot at ERROR: The auto registration file does not exist or incomplete. The auto registration file is mandatory for this upgrade. Use -k argument along with luupgrade command. autoreg_file is path to auto registration information file. See sysidcfg(4) for a list of valid keywords for use in this file. The format of the file is as follows. oracle_user=xxxx oracle_pw=xxxx http_proxy_host=xxxx http_proxy_port=xxxx http_proxy_user=xxxx http_proxy_pw=xxxx For more details refer "Oracle Solaris 10 9/10 Installation Guide: Planning for Installation and Upgrade". As with the previous problem, this is also easy to work around. Assuming that you don't want to use the auto-registration feature at upgrade time, create a file that contains just autoreg=disable and pass the filename on to luupgrade. Here is an example. # echo "autoreg=disable" /var/tmp/no-autoreg # luupgrade -u -s /mnt -k /var/tmp/no-autoreg -n s10u9-baseline System has findroot enabled GRUB No entry for BE in GRUB menu Copying failsafe kernel from media. 61364 blocks miniroot filesystem is Mounting miniroot at ####################################################################### NOTE: To improve products and services, Oracle Solaris communicates configuration data to Oracle after rebooting. You can register your version of Oracle Solaris to capture this data for your use, or the data is sent anonymously. For information about what configuration data is communicated and how to control this facility, see the Release Notes or www.oracle.com/goto/solarisautoreg. INFORMATION: After activated and booted into new BE , Auto Registration happens automatically with the following Information autoreg=disable ####################################################################### Validating the contents of the media . The media is a standard Solaris media. The media contains an operating system upgrade image. The media contains version . Constructing upgrade profile to use. Locating the operating system upgrade program. Checking for existence of previously scheduled Live Upgrade requests. Creating upgrade profile for BE . Checking for GRUB menu on ABE . Saving GRUB menu on ABE . Checking for x86 boot partition on ABE. Determining packages to install or upgrade for BE . Performing the operating system upgrade of the BE . CAUTION: Interrupting this process may leave the boot environment unstable or unbootable. The Live Upgrade operation now proceeds as expected. Once the system upgrade is complete, we can manually register the system. If you want to do a hands off registration during the upgrade, see the Oracle Solaris Auto Registration section of the Oracle Solaris Release Notes for instructions on how to do that. Technocrati Tags: Oracle Solaris Patching Live Upgrade var sc_project=1193495; var sc_invisible=1; var sc_security="a46f6831";

    Read the article

  • Ubuntu 12.04 Wireless won't connect with gnome network manager or wicd

    - by iceblueirish
    I have an HP Pavilion Slimline s3100n and I cannot for the life of me get the wifi to connect and stay connected in any circumstances with network manager or wicd... I'm pulling my freaking hair out with this, and I can't get a dang thing down AT ALL... switching to wicd didn't work, putting my password in the connections editor didn't work... nothing at all is working... everything that everyone else is saying to me is chinese and I really just want my pc to work... please help... I will provide any information needed to help me with this. just instruct me on how to find that information. Don't pass this question by without helping me please... I'm so frustrated...

    Read the article

  • Why am I getting a "network is unreachable" error on Ubuntu Server?

    - by jason328
    I'm a completely new to Ubuntu server and am having a hard time connecting the server to the internet. I first ran ping -n 8.8.8.8 connect:Network is unreachable Then I ran ifconfig Link encap:Local Loopback inet addr:127.0.0.1 Mask 255.0.0.0 inet6 addr: ::1/28Scope:host UP LOOPBACK RUNNING MTU:16436 RX packets:192 errors:0 dropped:0 overruns:0 frame:0 TX packets:192 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15360 (15.2KB) TX bytes:15360 (15.3KB) Here is ouput for sudo lspci -n 00:00.0 0600: 8086:2580 (rev 04) 00:02.0 0300: 8086:2582 (rev 04) 00:1d.0 0c03: 8086:2658 (rev 03) 00:1d.1 0c03: 8086:2659 (rev 03) 00:1d.0 0c03: 8086:265a (rev 03) 00:1d.0 0c03: 8086:265b (rev 03) 00:1d.0 0c03: 8086:265c (rev 03) 00:1e.0 0604: 8086:244e (rev d3) 00:1e.0 0401: 8086:266e (rev 03) 00:1f.0 0601: 8086:2640 (rev 03) 00:1f.0 0101: 8086:2651 (rev 03) 00:1f.0 0c05: 8086:266a (rev 03) 00:0b.0 0200: 8086:1654 (rev 03) lshw-c network returns WARNING: you should run this program as super-user. *-network DISABLED description:Ethernet interface product: NetXtreme BCM5705_2 Gigabit Ethernet vender: Broadcom Corporation physical id:b bus info:pci@0000:0a:0b.0 logical name: eth0 capabilities: bus_master_cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 firmware=5705-v3.18 latency=32 mingnt=64 multicast=yes port=twister pair lsmod code returned this Module Size Used By e100 37213 0 dm_crypt 23125 1 ppdev 17113 0 psmouse 87603 0 snd_intel8x0 38570 0 snd_ac97_codec 134826 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97188 2 snd_intel8x0, snd_ac97_codec serio_raw 13211 0 snd_timer 29990 1 snd_pcm snd 78855 4 snd_intel8x0, snd_ac97_codec, snd_pcm,snd_timer soundcore 15091 1 snd snd_page_alloc 18529 2 snd_intel8x0, snd_pcm ext2 73795 1 parport_pc 32866 1 mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev, parport_pc,lp usbhid 47199 0 hid 99559 1 usbhid tg3 152032 0 i915 468651 1 floppy 70365 0 drm_kms_helper 46978 1 i915 drm 242038 2 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 video 19596 1 i915 Again there is more but it's giving info on the driver itself. I know it works, I've used it. I assume then that my network got disabled when I installed Ubuntu Server. How do I enable it? I checked and the internet cable is connected to the D-link router. I have also used this same computer for internet access when I had Ubuntu Desktop installed so internet does work.

    Read the article

  • Solving Big Problems with Oracle R Enterprise, Part I

    - by dbayard
    Abstract: This blog post will show how we used Oracle R Enterprise to tackle a customer’s big calculation problem across a big data set. Overview: Databases are great for managing large amounts of data in a central place with rigorous enterprise-level controls.  R is great for doing advanced computations.  Sometimes you need to do advanced computations on large amounts of data, subject to rigorous enterprise-level concerns.  This blog post shows how Oracle R Enterprise enables R plus the Oracle Database enabled us to do some pretty sophisticated calculations across 1 million accounts (each with many detailed records) in minutes. The problem: A financial services customer of mine has a need to calculate the historical internal rate of return (IRR) for its customers’ portfolios.  This information is needed for customer statements and the online web application.  In the past, they had solved this with a home-grown application that pulled trade and account data out of their data warehouse and ran the calculations.  But this home-grown application was not able to do this fast enough, plus it was a challenge for them to write and maintain the code that did the IRR calculation. IRR – a problem that R is good at solving: Internal Rate of Return is an interesting calculation in that in most real-world scenarios it is impractical to calculate exactly.  Rather, IRR is a calculation where approximation techniques need to be used.  In this blog post, we will discuss calculating the “money weighted rate of return” but in the actual customer proof of concept we used R to calculate both money weighted rate of returns and time weighted rate of returns.  You can learn more about the money weighted rate of returns here: http://www.wikinvest.com/wiki/Money-weighted_return First Steps- Calculating IRR in R We will start with calculating the IRR in standalone/desktop R.  In our second post, we will show how to take this desktop R function, deploy it to an Oracle Database, and make it work at real-world scale.  The first step we did was to get some sample data.  For a historical IRR calculation, you have a balances and cash flows.  In our case, the customer provided us with several accounts worth of sample data in Microsoft Excel.      The above figure shows part of the spreadsheet of sample data.  The data provides balances and cash flows for a sample account (BMV=beginning market value. FLOW=cash flow in/out of account. EMV=ending market value). Once we had the sample spreadsheet, the next step we did was to read the Excel data into R.  This is something that R does well.  R offers multiple ways to work with spreadsheet data.  For instance, one could save the spreadsheet as a .csv file.  In our case, the customer provided a spreadsheet file containing multiple sheets where each sheet provided data for a different sample account.  To handle this easily, we took advantage of the RODBC package which allowed us to read the Excel data sheet-by-sheet without having to create individual .csv files.  We wrote ourselves a little helper function called getsheet() around the RODBC package.  Then we loaded all of the sample accounts into a data.frame called SimpleMWRRData. Writing the IRR function At this point, it was time to write the money weighted rate of return (MWRR) function itself.  The definition of MWRR is easily found on the internet or if you are old school you can look in an investment performance text book.  In the customer proof, we based our calculations off the ones defined in the The Handbook of Investment Performance: A User’s Guide by David Spaulding since this is the reference book used by the customer.  (One of the nice things we found during the course of this proof-of-concept is that by using R to write our IRR functions we could easily incorporate the specific variations and business rules of the customer into the calculation.) The key thing with calculating IRR is the need to solve a complex equation with a numerical approximation technique.  For IRR, you need to find the value of the rate of return (r) that sets the Net Present Value of all the flows in and out of the account to zero.  With R, we solve this by defining our NPV function: where bmv is the beginning market value, cf is a vector of cash flows, t is a vector of time (relative to the beginning), emv is the ending market value, and tend is the ending time. Since solving for r is a one-dimensional optimization problem, we decided to take advantage of R’s optimize method (http://stat.ethz.ch/R-manual/R-patched/library/stats/html/optimize.html). The optimize method can be used to find a minimum or maximum; to find the value of r where our npv function is closest to zero, we wrapped our npv function inside the abs function and asked optimize to find the minimum.  Here is an example of using optimize: where low and high are scalars that indicate the range to search for an answer.   To test this out, we need to set values for bmv, cf, t, emv, tend, low, and high.  We will set low and high to some reasonable defaults. For example, this account had a negative 2.2% money weighted rate of return. Enhancing and Packaging the IRR function With numerical approximation methods like optimize, sometimes you will not be able to find an answer with your initial set of inputs.  To account for this, our approach was to first try to find an answer for r within a narrow range, then if we did not find an answer, try calling optimize() again with a broader range.  See the R help page on optimize()  for more details about the search range and its algorithm. At this point, we can now write a simplified version of our MWRR function.  (Our real-world version is  more sophisticated in that it calculates rate of returns for 5 different time periods [since inception, last quarter, year-to-date, last year, year before last year] in a single invocation.  In our actual customer proof, we also defined time-weighted rate of return calculations.  The beauty of R is that it was very easy to add these enhancements and additional calculations to our IRR package.)To simplify code deployment, we then created a new package of our IRR functions and sample data.  For this blog post, we only need to include our SimpleMWRR function and our SimpleMWRRData sample data.  We created the shell of the package by calling: To turn this package skeleton into something usable, at a minimum you need to edit the SimpleMWRR.Rd and SimpleMWRRData.Rd files in the \man subdirectory.  In those files, you need to at least provide a value for the “title” section. Once that is done, you can change directory to the IRR directory and type at the command-line: The myIRR package for this blog post (which has both SimpleMWRR source and SimpleMWRRData sample data) is downloadable from here: myIRR package Testing the myIRR package Here is an example of testing our IRR function once it was converted to an installable package: Calculating IRR for All the Accounts So far, we have shown how to calculate IRR for a single account.  The real-world issue is how do you calculate IRR for all of the accounts?This is the kind of situation where we can leverage the “Split-Apply-Combine” approach (see http://www.cscs.umich.edu/~crshalizi/weblog/815.html).  Given that our sample data can fit in memory, one easy approach is to use R’s “by” function.  (Other approaches to Split-Apply-Combine such as plyr can also be used.  See http://4dpiecharts.com/2011/12/16/a-quick-primer-on-split-apply-combine-problems/). Here is an example showing the use of “by” to calculate the money weighted rate of return for each account in our sample data set.  Recap and Next Steps At this point, you’ve seen the power of R being used to calculate IRR.  There were several good things: R could easily work with the spreadsheets of sample data we were given R’s optimize() function provided a nice way to solve for IRR- it was both fast and allowed us to avoid having to code our own iterative approximation algorithm R was a convenient language to express the customer-specific variations, business-rules, and exceptions that often occur in real-world calculations- these could be easily added to our IRR functions The Split-Apply-Combine technique can be used to perform calculations of IRR for multiple accounts at once. However, there are several challenges yet to be conquered at this point in our story: The actual data that needs to be used lives in a database, not in a spreadsheet The actual data is much, much bigger- too big to fit into the normal R memory space and too big to want to move across the network The overall process needs to run fast- much faster than a single processor The actual data needs to be kept secured- another reason to not want to move it from the database and across the network And the process of calculating the IRR needs to be integrated together with other database ETL activities, so that IRR’s can be calculated as part of the data warehouse refresh processes In our next blog post in this series, we will show you how Oracle R Enterprise solved these challenges.

    Read the article

  • WiFi and Bluetooth will not work on Dell Studio XPS 1645

    - by Ross
    Today I acquired a Dell XPS 1645. Ubuntu seems to run alright on it however The bluetooth is not detected and the WiFi doesn't work. The WiFi is especially weird because I actually have the restricted driver enabled for it. It also worked for a short while when I first booted into Ubuntu however now there isn't even an option to enable wireless. If anyone could possibly help me out with this I'd deeply appreciate it. I've not had to return to Windows for a good while and it's not something I want to have to do now.

    Read the article

  • Do I need a wifi card to have internet access?

    - by Sarah
    I am attempting to set up a wireless network on 11.04, freshly download today. The router is on and working. However, I do not have a wifi "card" (which I am assuming is a little USB-type thing that allows internet access, but correct me if I am wrong) and every time I try to type in the MAC address and everything, nothing works. I also get the "firmware missing" error when I scroll over the signal strength, which I have tried looking up but have been unsuccessful with completely understanding it. I guess my main question is do I need another little device to be able to use wifi on my ubuntu? I do have an ethernet cable but another person is using it and I do not want to be tied down to that cable. the problem is that none of the wireless networks show up, however they show up when I go into Windows mode on my laptop. I get an error message at the top saying "firmware missing" which I have tried looking up but still have no straight answer for.

    Read the article

  • Issue with setting up multiple IP addresses on ubuntu server installation

    - by varunyellina
    I want to setup two ip addresses on my system for access through lan. This is my config on my other system. Desktop Installation My desktop installation runs with multiple IP's added through networkmanager both through lan and wifi. Server Installation On my server install I've edited /etc/network/interfaces to the following. auto eth0 auto eth0:1 # IP-1 iface eth0 inet static address 172.16.35.35 network 172.16.34.1 netmask 255.255.254.0 broadcast 172.166.35.255 dns-nameservers 172.16.100.221 8.8.8.8 # IP-2 iface eth0:1 inet static address 172.16.34.34 network 172.16.34.1 netmask 255.255.254.0 gateway 172.16.34.1 broadcast 172.16.35.255 After restarting through "/etc/init.d/networking restart" I recieve "Failed to bring up eth0:1" What am I doing wrong? Thankyou.

    Read the article

  • Can't connect to hidden network with BCM4313

    - by poomerang
    The wireless works fine with all the other wi-fi nets I have tried, the only problem is with this hidden network. I should add it's the only hidden network I've tried, so I am not sure if the problem is it being hidden or somethings else, but I've checked the settings of NetworkManager against another Ubuntu system (which can connect) and they appear to be the same, passphrase included. The network is using WPA2 Personal with AES encryption, I don't know how to check this setting but I believe it's the usual for WPA2, and therefore usually not a problem. Also, I can connect through ethernet, which should exclude any blacklisting of my device, I believe. I usually use brcmsmac drivers, I've tried also STA but the result is the same. I've also tried the suggestion from Unable to connect to hidden SSID with no luck output of lspci -v is 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Askey Computer Corp. Device 7175 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d4000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac

    Read the article

  • Internet stopped working after aircrack install (can still connect to my router). Suggestions?

    - by Dan
    I'm sure I did something dumb during the install for aircrack, but I have no clue what. Like I said, I can connect to my router (not trying to crack, simply logging into it), I just can't get internet access. To make this more interesting, the machine is dual booted and when I log into Windows I have zero issues. I feel like some driver may have been messed up in the process, but I'm not sure if that's a reasonable assumption or how exactly to check that. Also, can't revert to backup as there are none. Suggestions on how to trouble-shoot would be appreciated. EDIT: Hard-wiring to the wall I can get internet access on the Ubuntu side... PS- I know this is a stretch as far as fitting the Ubuntu section, but no other stackoverflow sites seemed to fit better.

    Read the article

  • Ubuntu connects to wireless but doesn't work!

    - by UbuntuUser990
    I just installed Ubuntu 14.04 LTS on my laptop, it connects to my wireless network and shows that it is connected, but when I try to load a webpage or do anything like download Steam for Dota 2, it doesn't work. When I try to connect my Facebook account to Ubuntu, it doesn't work. I want to be able to use Ubuntu with working internet access. What do I do?. ifconfig this shows up eth0 Link encap:Ethernet HWaddr 88:ae:1d:60:56:eb inet addr:192.168.1.13 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) When I type ping askubuntu.com this shows up ping: unknown host askubuntu.com

    Read the article

  • How can I prioritize wireless networks with network-manager

    - by kynan
    Mostly I use my laptop in an environment where different wireless networks are available and I would like to preferably connect to one of those and only fall back to the other one if that one is not available. Is there any way of prioritizing which wireless networks network-manager preferably connects to? The only workaround I found so far was unchecking Connect Automatically in the options and re-enabling it when my preferred network is not available.

    Read the article

  • "The system is running in low graphics mode", unable to connect to the Internet

    - by Blah
    When I try to log onto Ubuntu, I get a notice that reads: The system is running in low graphics mode. I searched for a solution and there are a slew of answers. However, many of them seem to suggest reinstalling different things. After pressing Ctrl+Alt+F1 and getting to a terminal, I attempt commands like sudo apt-get install example. Upon doing so I get notices that say things such as could not resolve host which I am assuming means I'm not connected to the Internet. Since I can not connect to the Internet, none of these responses are helpful to me. What can I do?

    Read the article

  • Sharing folder in a Virtual Private Windows Server 2008 R2 ?

    - by Triztian
    See Edit 2: Hello all, seems my involvement with computers has grown and I've found my self in the need to access a shared folder on a server. I've read some documentation and managed to set up the folder as a share, for this I created a local group and for now just one local user that has access to the share, the folder is in the public user folder and it's permissions should be (and I believe they are) read/write. The problem is that I can't connect from a remote machine I mean I don't know how the way it should be accessed, the server has a public IP and we use it also as a host to our website I don't know if that affects it though, the folder will be used as the "keeper" for the QuickBooks company files and has the database server manager installed. I've tried setting up a VPN Connection to the but no success. The server has a domain name a "http://www.example.com" that redirects to our website, I am unsure if it could be accessed that way, also the share has a location displayed when I right-click properties Heres what I've tried Setting up a VPN Connection (Windows Vista and 7) Got to the point where I got asked for credential and entered the user I created (which is not an admin) but I got a "Connection fail error 800" I suppose this is because in the domain field I entered the servers workgroup. right-click add network connection (Windows 7) Went through the wizard until I reached the point of entering the location, tried many things, the name in the share's properties(\\SOMETHING\Share), the http://www.example.com , the IP address I'm quite unfamiliar with this, so I have my guesses: Since the group and user are local they do not have access to the folder. The firewall in the server is blocking my connection. Anyways, any help and guidence is truly appreciated. EDIT 1: As @tony roth pointed out it may be a security fail, an I commented it out to management and said that that is not an issue, so please bare with me. EDIT 2: I've found out that the real question could be streamlined to "Sharing folder in a Virtual Private Server?", as thats what we have, a virtual private windows server 2008 R2, and I would like to know how to make it show like a normal folder in the client computer. Thanks again for all of your support.

    Read the article

  • 12.04 - why does the network icon dissapear every time my machine is turned off

    - by Howard Walker
    After spending an hour or two working out how to find the network Icon, I find that when I reboot the machine, I have to go through the whole procedure again. 1. The network menu is not there - so first I have to find the terminal. This has no particular location that I can find but usually I have to type terminal in the dash. 2. Then I have to type nm-applet in terminal 3. The network manager icon then appears, but only works if the terminal window remains open. Shut down the terminal window and the network disappears. This is a pain - plus I have to type my password in every time, which is another waste of time, thought this has always been a problem. So can anyone tell me how to make the web automatically connect at startup without any intervention from me.

    Read the article

  • Ubuntu Live USB: best practices for secure net traffic

    - by Och
    I want to to set up a live USB with Ubuntu, in the most secure way. So I want to have the persistent data on a second USB, something that its not that much problematic. How to configure a very safe Internet surfing (throughout a VPN?) Which are the best practices that could be implemented to have the Ubuntu live in a USB, the persistent data in other, and with the Internet access to a VPN (the Ubuntu privacy remix gives most of this, except the VPN config), Any ideas of how to combine the best of Ubuntu privacy remix, and Internet access to a VPN?

    Read the article

  • HP 530 Wireless problem. Bad communication with access point

    - by foxy
    I installed Ubuntu 11.10 on HP 530 and to make Wireless work installed STA driver from jockey (obviously proprietary) and, since it didn't work also installed their driver from HP website via ndiswrapper. After this (and a reboot) I see the WiFi indicator glowing, like it should be, and I am able to find local access points. But when I try to connect to mine personal one with WPA 2 security (with password) it hangs at authentification (I'm using wicd to manage wifi), and after a minute or so (I guess timeout of request happens) it says I have a wrong password (it is 100% correct). What might be the problem here? Yesterday I was able to connect to access point by changing type of encryption from passphrase to preshared key but didn't have internet access. Now, after reboot, I can't connect there again.

    Read the article

  • Cannot connect to Internet on 11.04 using BSNL EVDO Prithvi Card

    - by Joy
    I cannot connect to Internet using BSNL EVDO Prithvi data card. Went through some websites that offered help, installed wvdial package and tried again, but was unsuccessful. I have Read that, Ubuntu 11.04 automatically detects Data Card, You only need to configure "Network Manager" and it will work, I did exactly that, but the result is same. The OS detects the data card, and the presence of network , but it cannot login. I have read in some forums that Ubuntu 11.04 does not have support for BSNL EVDO Prithvi, is it true? I re-checked the "User ID" and "Password". Its working on Windows. Please help me fix this.

    Read the article

  • What ports should I open for listen and/or transmit in my firewall to keep internet ok?

    - by H_7
    What are the minimum ports and services that should I allow/open for listen and/or transmit in my firewall (I am using Firestarter) to keep my internet running ok? Some talk about what services, which port uses, and why it matters should be nice too. Thanks for any advice. I have some bet to the answer 80 http 443 https 53 dns EDIT: I will just browse some sites. I have a windows virtual machine, so I ll use it too, bu t just normal navigation too. No torrents, IRC's, FLASH, etc.. Thanks for attention. hmmm... lost! Linux Mint 9 here.

    Read the article

  • Does the Ubuntu One sync work?

    - by bisi
    I have been on this for several hours now, trying to get a simple second folder to sync with my (paid) account. I cannot tell you how many times I removed all devices, removed stored passwords, killed all processes of u1, logged out and back in online...and still, the tick in the file browser (Synchronize this folder) is loading and loading and loading. Also, I have logged out, rebooted countless times. And this is after me somehow managing to get the u1 preferences to finally "connect" again. I have also checked the status of your services, and none are close to what I am experiencing. And I have checked the suggested related questions above! So please, just confirm whether it is a problem on my side, or a problem on your side. EDIT: In the mean time, here is what has changed, on top of what is mentioned just above. • My files went from 0MB to 71.9MB, and is still rising. • My first folder of 400.2MB is being filled with the data as I write this. The second folder has the folder sub-structure in place. • Both folders now show in the File Browser that it will be synchronized. I believe that right now, it is all back to normal and working fine, and I guess that's what a good night's sleep can do ;). And we're now only back to the point where synchronizing is slow, but will pick up with the release of Natty (https://wiki.ubuntu.com/UbuntuOne/FAQ/WhyIsItTakingSoLongForMyFilesToSync). But to get to the questions: My about says I use 11.04, Natty Narwhal, but I am quite sure the last distribution I installed was 10.10. Folder A is 400.2MB, and Folder B is 29.5MB I am on a DSL line, behind a regular fritz.box setting. No proxy servers in use, and I did not install any particular firewall features. No physical firewall, just the router (on which I have a TV signal as well), and 2 switches to get to this floor. Status: inactive The ubuntuone-indicator runs the same window as when I click on my name on the top-right corner and select Ubuntu one, or in the Control Center choose Ubuntu one. It wasn't supposed to go further than this was it?

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >