Search Results

Search found 8303 results on 333 pages for 'knowledge modules'.

Page 42/333 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• Virtualbox on Ubuntu 12.04 and 3.5 kernel

  - by kas

  I have installed the 3.5 kernel under Ubuntu 12.04. When I install virtualbox I recieve the following error. Setting up virtualbox (4.1.12-dfsg-2ubuntu0.2) ... * Stopping VirtualBox kernel modules [ OK ] * Starting VirtualBox kernel modules * No suitable module for running kernel found [fail] invoke-rc.d: initscript virtualbox, action "restart" failed. Processing triggers for python-central ... Setting up virtualbox-dkms (4.1.12-dfsg-2ubuntu0.2) ... Loading new virtualbox-4.1.12 DKMS files... First Installation: checking all kernels... Building only for 3.5.0-18-generic Building initial module for 3.5.0-18-generic Error! Bad return status for module build on kernel: 3.5.0-18-generic (x86_64) Consult /var/lib/dkms/virtualbox/4.1.12/build/make.log for more information. * Stopping VirtualBox kernel modules [ OK ] * Starting VirtualBox kernel modules * No suitable module for running kernel found [fail] invoke-rc.d: initscript virtualbox, action "restart" failed. Setting up virtualbox-qt (4.1.12-dfsg-2ubuntu0.2) ... Does anyone know how I might be able to resolve this? Edit -- Here is the make.log DKMS make.log for virtualbox-4.1.12 for kernel 3.5.0-18-generic (x86_64) Mon Nov 19 12:12:23 EST 2012 make: Entering directory `/usr/src/linux-headers-3.5.0-18-generic' LD /var/lib/dkms/virtualbox/4.1.12/build/built-in.o LD /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/built-in.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/linux/SUPDrv-linux.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/SUPDrv.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/SUPDrvSem.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/alloc-r0drv.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/initterm-r0drv.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/memobj-r0drv.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/mpnotification-r0drv.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/powernotification-r0drv.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/linux/assert-r0drv-linux.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/linux/alloc-r0drv-linux.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/linux/initterm-r0drv-linux.o CC [M] /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/linux/memobj-r0drv-linux.o /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/linux/memobj-r0drv-linux.c: In function ‘rtR0MemObjLinuxDoMmap’: /var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/linux/memobj-r0drv-linux.c:1150:9: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[2]: *** [/var/lib/dkms/virtualbox/4.1.12/build/vboxdrv/r0drv/linux/memobj-r0drv-linux.o] Error 1 make[1]: *** [/var/lib/dkms/virtualbox/4.1.12/build/vboxdrv] Error 2 make: *** [_module_/var/lib/dkms/virtualbox/4.1.12/build] Error 2 make: Leaving directory `/usr/src/linux-headers-3.5.0-18-generic'

  Read the article

• Integrating Oracle Forms Applications 11g Into SOA (4-6/Mai/10)

  - by Claudia Costa

  Workshop Description This is a Free workshop of 3 days is targeted at Oracle Forms professionals interested in integrating Oracle Forms into a Service Oriented Architecture. The workshop highlights how Forms can be part of a Service Oriented Architecture, how the Oracle Forms functionalities make it possible to integrate existing (or new) Forms applications with new or existing development utilizing the Service Oriented Architecture concepts. The goal is to understand the incremental approach that Forms provides to developers who need to extend their business platform to JEE, allowing Oracle Forms customers to retain their investment in Oracle Forms while leveraging the opportunities offered by complementing technologies. During the event the attendees will implement the Oracle Forms functionalities that make it possible to integrate with SOA. Register Now! Prerequisites ·         Knowledge of the Oracle Forms development environment (mandatory) ·         Basic knowledge of the Oracle database ·         Basic knowledge of the Java Programming Language ·         Basic knowledge of Oracle Jdeveloper or another Java IDE   System Requirements   This workshop requires attendees to provide their own laptops for this class. Attendee laptops must meet the following minimum hardware/software requirements:   ·         Laptop/PC with minimum 4 GB RAM ·         Oracle Database ·         Oracle Forms 11g R1 PS1 (WebLogic Server 10.1.3.2 + Portal, Forms, Reports and Discoverer ) ·         Oracle JDeveloper 11g R1 PS1 http://download.oracle.com/otn/java/jdeveloper/1112/jdevstudio11112install.exe ·         TCP-IP Loopback Adapter Installation (before the SOASuite installation) ·         Oracle SOASuite 11g R1 PS1 (without BAM component) When asked for an admin password, please use 'welcome1 http://download.oracle.com/otn/nt/middleware/11g/ofm_rcu_win_11.1.1.2.0_disk1_1of1.zip http://download.oracle.com/otn/nt/middleware/11g/ofm_soa_generic_11.1.1.2.0_disk1_1of1.zip ·         Oracle BI Publisher 10.1.3.4.1 http://download.oracle.com/otn/nt/ias/101341/bipublisher_windows_x86_101341.zip ·         Oracle BI Publisher Desktop 10.1.3.4. http://download.oracle.com/otn/nt/ias/101341/bipublisher_desktop_windows_x86_101341.zip   ·         At least 1 Oracle Forms solution already upgraded to the Oracle FMW 11g platform.   ------------------------------------------------------------------------------------------   Horário e Local:   4-6 de Maio / 9:30-18:00h Oracle, Porto Salvo Register Here Para mais informação por favor contacte: [email protected]

  Read the article

• Vodacom Call Center Management on the NetBeans Platform

  - by Geertjan

  If you live in South Africa, you know about Vodacom. Vodacom is one of the dominant mobile communication companies in South Africa, and beyond, providing voice, messaging, data, and similar mobile services. Inside Vodacom there's an application named Helios, which is a call centre application that had its inception in 2009 and consists of two parts. Firstly, a web-based front-end that allows a call centre agent to service subscribers using a Google-like search on a knowledge base structured as a collection of FAQs. The web-based front-end uses plain-old HTML + CSS + a good helping of JQuery and JQueryUI. This is delivered via JSR-168 portlets running on a cluster of IBM Portal 6 servers. In turn, the portlets communicate via RMI with several back-end EJB's containing the business logic. These EJB's are deployed on a cluster of Weblogic Application Servers, version 10.3.6. The second part is a NetBeans Platform application used for maintaining and constructing the knowledge base, i.e., the back-end of the web-based front-end. Helios is also used for a number of other maintenance functions, such as access permissions, user maintenance, and news bulletins. Below, in the web-based front-end, call centre agents can enter search terms and are presented with a number of FAQs from the knowledge base. Upon selecting a FAQ article, the agent is presented with the article text, the process to guide the subscriber, system checks that display information specific to the subscriber, and links to related applications and articles: Below, you can see that applications are searchable and can be accessed using the same web-based front-end as shown above. And, as can be seen below, knowledge base FAQs are maintained using the Helios Maintenance Application, which is the Vodacom application built on the NetBeans Platform: Several thousand call centre agent user accounts are administered using the Helios Maintenance Application. Below the main FAQ page is shown, together with the About dialog: Vodacom is happy with the back-end NetBeans Platform application. However, the front-end stack runs on quite old technology. Ideally Vodacom would like to migrate the portlets to Oracle Weblogic Portal or Oracle WebCenter, but this hasn't been accomplished yet. Migrating makes sense as the rest of the application server environment consists entirely of Oracle products.

  Read the article

• Vodacom Call Center Management on the NetBeans Platform

  - by Geertjan

  If you live in South Africa, you know about Vodacom. Vodacom is one of the dominant mobile communication companies in South Africa, and beyond, providing voice, messaging, data, and similar mobile services. Inside Vodacom there's an application named Helios, which is a call centre application that had its inception in 2009 and consists of two parts. Firstly, a web-based front-end that allows a call centre agent to service subscribers using a Google-like search on a knowledge base structured as a collection of FAQs. The web-based front-end uses plain-old HTML + CSS + a good helping of JQuery and JQueryUI. This is delivered via JSR-168 portlets running on a cluster of IBM Portal 6 servers. In turn, the portlets communicate via RMI with several back-end EJB's containing the business logic. These EJB's are deployed on a cluster of Weblogic Application Servers, version 10.3.6. The second part is a NetBeans Platform application used for maintaining and constructing the knowledge base, i.e., the back-end of the web-based front-end. Helios is also used for a number of other maintenance functions, such as access permissions, user maintenance, and news bulletins. Below, in the web-based front-end, call centre agents can enter search terms and are presented with a number of FAQs from the knowledge base. Upon selecting a FAQ article, the agent is presented with the article text, the process to guide the subscriber, system checks that display information specific to the subscriber, and links to related applications and articles: Below, you can see that applications are searchable and can be accessed using the same web-based front-end as shown above. And, as can be seen below, knowledge base FAQs are maintained using the Helios Maintenance Application, which is the Vodacom application built on the NetBeans Platform: Several thousand call centre agent user accounts are administered using the Helios Maintenance Application. Below the main FAQ page is shown, together with the About dialog: Vodacom is happy with the back-end NetBeans Platform application. However, the front-end stack runs on quite old technology. Ideally Vodacom would like to migrate the portlets to Oracle Weblogic Portal or Oracle WebCenter, but this hasn't been accomplished yet. Migrating makes sense as the rest of the application server environment consists entirely of Oracle products.

  Read the article

• Welcome!

  - by ConfusedComputers

  Here are some useful links if you have any computer problems, they concentrate on computer repairs in kidderminster and they have a wealth of knowledge that they use to assist people with computer issues. So if your confused about computers then here is some useful resources that could help you get over your computer problems. They have a designated confused computer knowledge base that has hundred of pages of information about all kinds of computer problems so hit them up and see what they can do for you!

  Read the article

• How to Run Apache Commands From Oracle HTTP Server 11g Home

  - by Daniel Mortimer

  Every now and then you come across a problem when there is nothing in the "troubleshooting manual" which can help you. Instead you need to think outside the box. This happened to me two or three years back. Oracle HTTP Server (OHS) 11g did not start. The error reported back by OPMN was generic and gave no clue, and worse the HTTP Server error log was empty, and remained so even after I had increased the OPMN and HTTP Server log levels. After checking configuration files, operating system resources, etc I was still no nearer the solution. And then the light bulb moment! OHS is based on Apache - what happens if I attempt to start HTTP Server using the native apache command. Trouble was the OHS 11g solution has its binaries and configuration files in separate "home" directories ORACLE_HOME contains the binaries ORACLE_INSTANCE contains the configuration files How to set the environment so that native apache commands run without error? Eventually, with help from a colleague, the knowledge articleHow to Start Oracle HTTP Server 11g Without Using opmnctl [ID 946532.1]was born! To be honest, I cannot remember the exact cause and solution to that OHS problem two or three years ago. But, I do remember that an attempt to start HTTP Server using the native apache command threw back an error to the console which led me to discover the culprit was some unusual filesystem fault.The other day, I was asked to review and publish a new knowledge article which described how to use the apache command to dump a list of static and shared loaded modules. This got me thinking that it was time [ID 946532.1] was given an update. The resultHow To Run Native Apache Commands in an Oracle HTTP Server 11g Environment [ID 946532.1] Highlights: Title change Improved environment setting scripts Interactive, should be no need to manually edit the scripts (although readers are welcome to do so) Automatically dump out some diagnostic information Inclusion of some links to other troubleshooting collateral To view the knowledge article you need a My Oracle Support login. For convenience, you can obtain the scripts via the links below.MS Windows:Wrapper cmd script - calls main cmd script [After download, remove the ".txt" file extension]Main cmd script - sets OHS 11g environment to run Apache commands [After download, remove the ".txt" file extension]Unix:Shell script - sets OHS 11g environment to run Apache commands on Unix Please note: I cannot guarantee that the scripts held in the blog repository will be maintained. Any enhancements or faults will applied to the scripts attached to the knowledge article. Lastly, to find out more about native apache commands, refer to the Apache Documentation apachectl - Apache HTTP Server Control Interface[http://httpd.apache.org/docs/2.2/programs/apachectl.html]httpd - Apache Hypertext Transfer Protocol Server[http://httpd.apache.org/docs/2.2/programs/httpd.html]

  Read the article

• PowerShell – Sexy PoSH console

  - by Waclaw Chrabaszcz

  Originally posted on: http://geekswithblogs.net/Wchrabaszcz/archive/2014/08/15/powershell--sexy-posh-console.aspxPowerShell don't has to be boring. Download this module: http://www.powertheshell.com/download/modules/PTSAeroConsole.zip Extract it into C:\Windows\System32\WindowsPowerShell\v1.0\Modules(you may need to enable both module files by right clicking | Prosperities |Unlock) Now you can start PowerShell window:  Import-Module PTSAeroConsoleEnable-AeroGlassThemeDisable-AeroGlassTheme   Enjoy!

  Read the article

• Cumulative Updates available for SQL Server 2008 SP2 & SP3

  - by AaronBertrand

  Today Microsoft has released two new cumulative updates for SQL Server 2008. Cumulative Update #10 for SQL Server 2008 Service Pack 2 Knowledge Base Article: KB #2696625 At the time of writing, there is one fix listed The build number is 10.00.4332 Cumulative Update #5 for SQL Server 2008 Service Pack 3 Knowledge Base Article: KB #2696626 At the time of writing, there are four fixes listed The build number is 10.00.5785 As usual, I'll post my standard disclaimer here: these updates are NOT for SQL...(read more)

  Read the article

• Cumulative Updates available for SQL Server 2008 SP2 & SP3

  - by AaronBertrand

  Today Microsoft has released two new cumulative updates for SQL Server 2008. Cumulative Update #10 for SQL Server 2008 Service Pack 2 Knowledge Base Article: KB #2696625 At the time of writing, there is one fix listed The build number is 10.00.4332 Cumulative Update #5 for SQL Server 2008 Service Pack 3 Knowledge Base Article: KB #2696626 At the time of writing, there are four fixes listed The build number is 10.00.5785 As usual, I'll post my standard disclaimer here: these updates are NOT for SQL...(read more)

  Read the article

• Help with Apache mod_rewrite rules

  - by Brian Neal

  I want to change some legacy URL's like this: /modules.php?name=News&file=article&sid=600 to this: /news/story/600/ This is what I have tried: RewriteEngine on RewriteCond %{QUERY_STRING} ^name=News&file=([a-z_]+)&sid=([0-9]+) RewriteRule ^modules\.php /news/story/%2/ [R=301,L] However I still get 404's on the old URLs. I do have some other rewrite rules working, so I am pretty sure mod_rewrite is enabled and functioning. Any ideas? Thanks.

  Read the article

• Why isn't this driver install working (sudo code)?

  - by Nick

  I have a soundcard that I'd like to use and I've been trying to install it and being a new Ubuntu user, I get about half way through this in the Terminal and it stops cooperating with me... See the link (soundcard hyperlink) but basically what I have here: I do the following and it works: sudo apt-get install subversion svn co https://line6linux.svn.sourceforge.net/svnroot/line6linux Change to the directory cd line6linux/driver/trunk Time to build from the source but first make sure you have the latest build and headers sudo apt-get install build-essential sudo apt-get install linux-headers Then after this point it says must specify file to install. Not sure how to do this or what it means. Then, running make gives the following output: ./set_revision.sh ./set_revision.sh: 9: test: https://line6linux.svn.sourceforge.net/svnroot/line6linux/driver/trunk: unexpected operator make -C /lib/modules/3.2.0-29-generic-pae/build CONFIG_LINE6_USB=m SUBDIRS=/home/nick/line6linux/driver/trunk modules make[1]: Entering directory /usr/src/linux-headers-3.2.0-29-generic-pae' CC [M] /home/nick/line6linux/driver/trunk/audio.o /home/nick/line6linux/driver/trunk/audio.c: In function ‘line6_init_audio’: /home/nick/line6linux/driver/trunk/audio.c:30:57: error: ‘THIS_MODULE’ undeclared (first use in this function) /home/nick/line6linux/driver/trunk/audio.c:30:57: note: each undeclared identifier is reported only once for each function it appears in make[2]: * [/home/nick/line6linux/driver/trunk/audio.o] Error 1 make[1]: * [module/home/nick/line6linux/driver/trunk] Error 2 make[1]: Leaving directory/usr/src/linux-headers-3.2.0-29-generic-pae' make: * [default] Error 2 This is in Ubuntu 12.04.1 LTS Another thing, semi related. Cut, copy, paste? Seems like it's different from program to program. I was in the terminal and hit Ctrl-C and then Ctrl-Shift-V in Firefox and it won't paste. But in terminal it will paste. I'm confused. Here is what it's giving me after I hit "Make": nick@NickUbuntu:~/line6linux/driver/trunk$ make ./set_revision.sh ./set_revision.sh: 9: test: https://line6linux.svn.sourceforge.net/svnroot/line6linux/driver/trunk: unexpected operator make -C /lib/modules/3.2.0-29-generic-pae/build CONFIG_LINE6_USB=m SUBDIRS=/home/nick/line6linux/driver/trunk modules make[1]: Entering directory /usr/src/linux-headers-3.2.0-29-generic-pae' CC [M] /home/nick/line6linux/driver/trunk/audio.o /home/nick/line6linux/driver/trunk/audio.c: In function ‘line6_init_audio’: /home/nick/line6linux/driver/trunk/audio.c:30:57: error: ‘THIS_MODULE’ undeclared (first use in this function) /home/nick/line6linux/driver/trunk/audio.c:30:57: note: each undeclared identifier is reported only once for each function it appears in make[2]: *** [/home/nick/line6linux/driver/trunk/audio.o] Error 1 make[1]: *** [_module_/home/nick/line6linux/driver/trunk] Error 2 make[1]: Leaving directory/usr/src/linux-headers-3.2.0-29-generic-pae' make: * [default] Error 2 Looks like these folks also had similar problems: http://ubuntuforums.org/showthread.php?t=1163608&page=3

  Read the article

• Converting #MDX to #DAX and PowerPivot Workshop online #ppws

  - by Marco Russo (SQLBI)

  I just published the article Converting MDX to DAX – First Steps on the renewed SQLBI web site about converting MDX to DAX. The reason is that with BISM Tabular in Analysis Services 2012 you will be able to write queries in both DAX and MDX. If you already know MDX, you might wonder how to “translate” your MDX knowledge in DAX. I think that this is another way you can improve your knowledge about DAX: it has different concepts behind and this comparison should be helpful in this purpose. This is...(read more)

  Read the article

• How can I keep the cpu temp low?

  - by Newton

  I have an HP pavilion dv7, I'm using ubuntu 12.04 so the overheating problem with sandybridge cpu is a lot better. However my laptop is still becoming too hot to keep on my legs. The problem is that the fan wait too much before starting, so the medium temp is too hight. When I'm using windows 7 the laptop is room-temperature cold, I've absolutely no problem. On windows the fan is always spinning very low & very silently so the heat is continuously removed, without reaching an unconfortable temp. How can I force the computer to act like that also on ubuntu? PS The bios can't let me control this kind of thing, and this is my experience with lm-sensors and fancontrol al@notebook:~$ sudo sensors-detect [sudo] password for al: # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Hewlett-Packard HP Pavilion dv7 Notebook PC (laptop) # Board: Hewlett-Packard 1800 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8518 Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel Cougar Point (PCH) Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Next adapter: i915 gmbus disabled (i2c-0) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus ssc (i2c-1) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOB (i2c-2) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus vga (i2c-3) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOA (i2c-4) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus panel (i2c-5) Do you want to scan it? (YES/no/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: i915 GPIOC (i2c-6) Do you want to scan it? (YES/no/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Next adapter: i915 gmbus dpc (i2c-7) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOD (i2c-8) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus dpb (i2c-9) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOE (i2c-10) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus reserved (i2c-11) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 gmbus dpd (i2c-12) Do you want to scan it? (YES/no/selectively): y Next adapter: i915 GPIOF (i2c-13) Do you want to scan it? (YES/no/selectively): y Next adapter: DPDDC-B (i2c-14) Do you want to scan it? (YES/no/selectively): y Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK al@notebook:~$ sudo /etc/init.d/module-init-tools restart Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service module-init-tools restart Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the stop(8) and then start(8) utilities, e.g. stop module-init-tools ; start module-init-tools. The restart(8) utility is also available. module-init-tools stop/waiting al@notebook:~$ sudo service module-init-tools restart stop: Unknown instance: module-init-tools stop/waiting al@notebook:~$ sudo service module-init-tools start module-init-tools stop/waiting al@notebook:~$ sudo pwmconfig # pwmconfig revision 5857 (2010-08-22) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Is my case too desperate?

  Read the article

• No GLX on Intel card with multiseat with additional nVidia card

  - by MeanEYE

  I have multiseat configured and my Xorg has 2 server layouts. One is for nVidia card and other is for Intel card. They both work, but display server assigned to Intel card doesn't have hardware acceleration since DRI and GLX module being used is from nVidia driver. So my question is, can I configure layouts somehow to use right DRI and GLX with each card? My Xorg.conf: Section "ServerLayout" Identifier "Default" Screen 0 "Screen0" 0 0 Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "TV" Screen 0 "Screen1" 0 0 Option "Xinerama" "0" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E198WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 610" EndSection Section "Device" Identifier "Device1" Driver "intel" BusID "PCI:0:2:0" Option "AccelMethod" "uxa" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-0: nvidia-auto-select +1440+0, DFP-1: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Log file for Intel: [ 18.239] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 18.239] X Protocol Version 11, Revision 0 [ 18.239] Build Operating System: Linux 2.6.24-32-xen x86_64 Ubuntu [ 18.239] Current Operating System: Linux bytewiper 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 [ 18.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=fc0616fd-f212-4846-9241-ba4a492f0513 ro quiet splash [ 18.239] Build Date: 20 September 2012 11:55:20AM [ 18.239] xorg-server 2:1.13.0+git20120920.70e57668-0ubuntu0ricotz (For technical support please see http://www.ubuntu.com/support) [ 18.239] Current version of pixman: 0.26.0 [ 18.239] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.239] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.239] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 21 18:32:14 2012 [ 18.239] (==) Using config file: "/etc/X11/xorg.conf" [ 18.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.239] (++) ServerLayout "TV" [ 18.239] (**) |-->Screen "Screen1" (0) [ 18.239] (**) | |-->Monitor "Monitor1" [ 18.240] (**) | |-->Device "Device1" [ 18.240] (**) Option "Xinerama" "0" [ 18.240] (==) Automatically adding devices [ 18.240] (==) Automatically enabling devices [ 18.240] (==) Automatically adding GPU devices [ 18.240] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 18.240] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 18.240] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.240] (II) Loader magic: 0x7f6917944c40 [ 18.240] (II) Module ABI versions: [ 18.240] X.Org ANSI C Emulation: 0.4 [ 18.240] X.Org Video Driver: 13.0 [ 18.240] X.Org XInput driver : 18.0 [ 18.240] X.Org Server Extension : 7.0 [ 18.240] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.241] (--) PCI: (0:0:2:0) 8086:0152:1043:84ca rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 [ 18.241] (--) PCI:*(0:1:0:0) 10de:104a:1458:3546 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 18.241] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.241] Initializing built-in extension Generic Event Extension [ 18.241] Initializing built-in extension SHAPE [ 18.241] Initializing built-in extension MIT-SHM [ 18.241] Initializing built-in extension XInputExtension [ 18.241] Initializing built-in extension XTEST [ 18.241] Initializing built-in extension BIG-REQUESTS [ 18.241] Initializing built-in extension SYNC [ 18.241] Initializing built-in extension XKEYBOARD [ 18.241] Initializing built-in extension XC-MISC [ 18.241] Initializing built-in extension SECURITY [ 18.241] Initializing built-in extension XINERAMA [ 18.241] Initializing built-in extension XFIXES [ 18.241] Initializing built-in extension RENDER [ 18.241] Initializing built-in extension RANDR [ 18.241] Initializing built-in extension COMPOSITE [ 18.241] Initializing built-in extension DAMAGE [ 18.241] Initializing built-in extension MIT-SCREEN-SAVER [ 18.241] Initializing built-in extension DOUBLE-BUFFER [ 18.241] Initializing built-in extension RECORD [ 18.241] Initializing built-in extension DPMS [ 18.241] Initializing built-in extension X-Resource [ 18.241] Initializing built-in extension XVideo [ 18.241] Initializing built-in extension XVideo-MotionCompensation [ 18.241] Initializing built-in extension XFree86-VidModeExtension [ 18.241] Initializing built-in extension XFree86-DGA [ 18.241] Initializing built-in extension XFree86-DRI [ 18.241] Initializing built-in extension DRI2 [ 18.241] (II) LoadModule: "glx" [ 18.241] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 18.247] (II) Module glx: vendor="NVIDIA Corporation" [ 18.247] compiled for 4.0.2, module version = 1.0.0 [ 18.247] Module class: X.Org Server Extension [ 18.247] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012 [ 18.247] Loading extension GLX [ 18.247] (II) LoadModule: "intel" [ 18.248] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.248] (II) Module intel: vendor="X.Org Foundation" [ 18.248] compiled for 1.13.0, module version = 2.20.13 [ 18.248] Module class: X.Org Video Driver [ 18.248] ABI class: X.Org Video Driver, version 13.0 [ 18.248] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 18.248] (++) using VT number 8 [ 18.593] (II) intel(0): using device path '/dev/dri/card0' [ 18.593] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.593] (==) intel(0): RGB weight 888 [ 18.593] (==) intel(0): Default visual is TrueColor [ 18.593] (**) intel(0): Option "AccelMethod" "uxa" [ 18.593] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1) [ 18.593] (**) intel(0): Relaxed fencing enabled [ 18.593] (**) intel(0): Wait on SwapBuffers? enabled [ 18.593] (**) intel(0): Triple buffering? enabled [ 18.593] (**) intel(0): Framebuffer tiled [ 18.593] (**) intel(0): Pixmaps tiled [ 18.593] (**) intel(0): 3D buffers tiled [ 18.593] (**) intel(0): SwapBuffers wait enabled ... [ 20.312] (II) Module fb: vendor="X.Org Foundation" [ 20.312] compiled for 1.13.0, module version = 1.0.0 [ 20.312] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.312] (II) Loading sub module "dri2" [ 20.312] (II) LoadModule: "dri2" [ 20.312] (II) Module "dri2" already built-in [ 20.312] (==) Depth 24 pixmap format is 32 bpp [ 20.312] (II) intel(0): [DRI2] Setup complete [ 20.312] (II) intel(0): [DRI2] DRI driver: i965 [ 20.312] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 20.312] (II) UXA(0): Driver registered support for the following operations: [ 20.312] (II) solid [ 20.312] (II) copy [ 20.312] (II) composite (RENDER acceleration) [ 20.312] (II) put_image [ 20.312] (II) get_image [ 20.312] (==) intel(0): Backing store disabled [ 20.312] (==) intel(0): Silken mouse enabled [ 20.312] (II) intel(0): Initializing HW Cursor [ 20.312] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.313] (**) intel(0): DPMS enabled [ 20.313] (==) intel(0): Intel XvMC decoder enabled [ 20.313] (II) intel(0): Set up textured video [ 20.313] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 20.313] (II) intel(0): direct rendering: DRI2 Enabled [ 20.313] (==) intel(0): hotplug detection: "enabled" [ 20.332] (--) RandR disabled [ 20.335] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 20.335] (II) intel(0): Setting screen physical size to 508 x 285 [ 20.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.340] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.340] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.340] (II) LoadModule: "evdev" [ 20.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

  Read the article

• Change /usr/lib to /usr/lib32 for eclipse to look for *.so files

  - by firen

  I am trying to run eclipse and I am getting: /usr/lib/gio/modules/libgvfsdbus.so: wrong ELF class: ELFCLASS64 Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so I already found out that it is because this library is 64bits. I have found 32bit version of it and putted in subdirectory of /usr/lib32 but eclipse do not want to look for it there. How can I make it to look for libraries in /usr/lib32?

  Read the article

• What are the basic features of an email module in a common web application?

  - by Coral Doe

  When developing an email module, what are the features to have in mind, besides actual email sending? I am talking about an email module that notifies users of events and periodically sends reports. The only other feature I have in mind is maintaining grey/black lists for users that do illegal operations in the system or any other things that may lead to email/domain/IP banning. Is there an etiquette for developing email modules? Are there some references of requirements for such modules?

  Read the article

• WebCenter Customer Spotlight: spectrumK Holding GmbH

  - by me

  Author: Peter Reiser - Social Business Evangelist Oracle WebCenter Solution Summary spectrumK Holding GmbH was founded in 2007 by various German health insurance funds and national insurance associations and is a service provider for the healthcare market, covering patient care management, financial management, and information management, as well as payment services and legal counseling. spectrumK Holding GmbH business objectives was to implement innovative new Web-based services and solution systems for health insurance funds by integrating a multitude of isolated solutions from different organizations. Using Oracle WebCenter Portal, Oracle WebCenter Content, and Site Studio, the customer created a multiple-portal environment and deployed the 1st three applications for patient receipt, a medication navigator, and disability information. spectrumK Holding GmbH accelerated time-to-market for new features by reducing the development time, achieved 40% development and cost savings using standard modules and realized 80% overall savings using the Oracle multiple portal environment, as compared to individual installations. Company Overview spectrumK Holding GmbH was founded in 2007 by various company health insurance funds and national insurance associations. A service provider for the healthcare market, spectrumK consists of one holding company and four operative subsidiaries. Its broad product portfolio of compulsory health funds covers patient care management, financial management, and information management, as well as payment services and legal counseling. Business ChallengesspectrumK Holding GmbH business objectives were to implement innovative new Web-based services and solution systems for the health insurance funds by integrating a multitude of isolated solutions from different organizations. Specifically, spectrumK was looking to: Establish a portal-based environment to provide health coverage information services to the insured, with the option to integrate a multitude of isolated solutions from different organizations Implement innovative new Web-based spectrumK service products and solutions systems for health insurance funds Lower costs while improving services for the health fund’s clients Find an infrastructure that supports the small development team in efficient implementation and operation of the solution Reuse standard modules while enabling easy, inexpensive adaptations to customer-specific corporate requirements Solution Deployed spectrumK Holding GmbH created a multiple-portal environment, called “KundenCenter+“ which is based on the integration of Oracle WebCenter Portal, Oracle WebCenter Content, and Site Studio. They initiated and launched the first three of the company’s KundenCenter+, Oracle-based modules for patient receipt, a medication navigator, and disability information, with numerous successful deployments and individual customer environment adaptations. Business ResultsspectrumK Holding GmbH accelerated time-to-market for new features by reducing the development time, achieved 40% development and cost savings using standard modules and realized 80% overall savings using the Oracle multiple portal environment, as compared to individual installations Additional Information  spectrumK Holding GmbH Snapshot Oracle WebCenter Suite Oracle Customer Support Oracle Consulting Oracle WebCenter Content

  Read the article

• Resources for Learning CSS [closed]

  - by historicus

  I am a server-side programmer that is proficient in Java. I have fairly good knowledge of client-side scripting - primarily Javascript - but my ability in CSS is lacking. While I have the know-how to modify basic styles, I'd like to understand a bit more about CSS layouts and styling. Can anyone with expert knowledge of CSS provide a good source for diving into the topic? Also, are there any short, online courses that might help in gaining the information I seek?

  Read the article

• ERROR running Bumblebee on 13.10

  - by paul

  I'm trying to get Bumblebee working again after an upgrade to Saucy. Running software with Optirun gives the following output: optirun nvidia-settings [ 45.697126] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load /usr/lib/xorg/modules/libglamoregl.so: /usr/lib/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context [ 45.697179] [ERROR]Aborting because fallback start is disabled. Does anyone know how to fix this? Thanks! :)

  Read the article

• Ralink-based USB Wi-Fi adapter drops connection after some time

  - by Hector Aguilar

  I have an Intellinet Wireless 150N USB adapter (based on a Ralink rt3070 chip) in an Ubuntu 10.10 installation. The problem is, that it's dropping the connection after being connected to a wireless network for 10 - 20 minutes. I have to unplug it and plug it in again every time this happens. I read somewhere, that I need to blacklist some chipset modules, but I don't how? And which ralink modules I have to blacklist? Thanks for your answers! :D

  Read the article

• Converting a PowerShell Script into a Module

  This article is taken from the book Windows PowerShell in Action, Second Edition. The author provides an overview of the PowerShell modules, including their roles and terminology. He shows how modules allow packaging collections of PowerShell resources into shareable, reusable units. The author dives into the methods of writing Powershell scripts and converting a script into a module.

  Read the article

• Mock RequireJS define dependencies with config.map

  - by Aligned

  Originally posted on: http://geekswithblogs.net/Aligned/archive/2014/08/18/mock-requirejs-define-dependencies-with-config.map.aspxI had a module dependency, that I’m pulling down with RequireJS that I needed to use and write tests against. In this case, I don’t care about the actual implementation of the module (it’s simple enough that I’m just avoiding some AJAX calls). EDIT: make sure you look at the bottom example after the edit before using the config.map approach. I found that there is an easier way. I did not want to change the constructor of the consumer as I had a chain of changes that would have to be made and that would have been to invasive for this task. I found a question on StackOverflow with a short, but helpful answer from “Artem Oboturov”. We can use the config.map from RequireJs to achieve this. Here is some code: A module example (“usefulModule” in Common/Modules/usefulModule.js): define([], function() { "use strict"; var testMethod = function() { ... }; // add more functionality of the module return { testMethod; } }); A consumer of usefulModule example: define([ "Commmon/Modules/usefulModule" ], function(usefulModule) { "use strict"; var consumerModule = function(){ var self = this; // add functionality of the module } }); Using config.map in the html of the test runner page (and in your Karma config –> I’m still trying to figure this out): map: {'*': { // replace usefulModule with a mock 'Common/Modules/usefulModule': '/Tests/Specs/Common/usefulModuleMock.js' } } With the new mapping, Require will load usefulModuleMock.js from Tests/Specs/Common instead of the real implementation. Some of the answers on StackOverflow mentioned Squire.js, which looked interesting, but I wasn’t ready to introduce a new library at this time. That’s all you need to be able to mock a depency in RequireJS. However, there are many good cases when you should pass it in through the constructor instead of this approach.   EDIT: After all that, here’s another, probably better way: The consumer class, updated: define([ "Commmon/Modules/usefulModule" ], function(UsefulModule) { "use strict"; var consumerModule = function(){ var self = this; self.usefulModule = new UsefulModule(); // add functionality of the module } }); Jasmine test: define([ "consumerModule", "/UnitTests/Specs/Common/Mocks/usefulModuleMock.js" ], function(consumerModule, UsefulModuleMock){ describe("when mocking out the module", function(){ it("should probably just override the property", function(){ var consumer = new consumerModule(); consumer.usefulModule = new UsefulModuleMock(); }); }); });   Thanks for letting me think out loud :-).

  Read the article

• Which is preferable? To know jQuery well, or to know JavaScript well? [closed]

  - by Marwan

  I'm quite familiar with using jQuery, but I've come to feel like a bit of a dummy using it, as my knowledge of JavaScript itself is rather poor. So I'm considering abandoning jQuery and spending time working in straight JS... perhaps even creating my own framework as a learning experience. Does this make sense though? Is there any real point to obtaining more than a passing knowledge of JavaScript when jQuery allows me to accomplish so much, so quickly?

  Read the article

• How employable am I as a programmer?

  - by dsimcha

  I'm currently a Ph.D. student in Biomedical Engineering with a concentration in computational biology and am starting to think about what I want to do after graduate school. I feel like I've accumulated a lot of programming skills while in grad school, but taken a very non-traditional path to learning all this stuff. I'm wondering whether I would have an easy time getting hired as a programmer and could fall back on that if I can't find a good job directly in my field, and if so whether I would qualify for a more prestigious position than "code monkey". Things I Have Going For Me Approximately 4 years of experience programming as part of my research. I believe I have a solid enough grasp of the fundamentals that I could pick up new languages and technologies pretty fast, and could demonstrate this in an interview. Good math and statistics skills. An extensive portfolio of open source work (and the knowledge that working on these projects implies): I wrote a statistics library in D, mostly from scratch. I wrote a parallelism library (parallel map, reduce, foreach, task parallelism, pipelining, etc.) that is currently in review for adoption by the D standard library. I wrote a 2D plotting library for D against the GTK Cairo backend. I currently use it for most of the figures I make for my research. I've contributed several major performance optimizations to the D garbage collector. (Most of these were low-hanging fruit, but it still shows my knowledge of low-level issues like memory management, pointers and bit twiddling.) I've contributed lots of miscellaneous bug fixes to the D standard library and could show the change logs to prove it. (This demonstrates my ability read other people's code.) Things I Have Going Against Me Most of my programming experience is in D and Python. I have very little to virtually no experience in the more established, "enterprise-y" languages like Java, C# and C++, though I have learned a decent amount about these languages from small, one-off projects and discussions about language design in the D community. In general I have absolutely no knowledge of "enterprise-y" technlogies. I've never used a framework before, possibly because most reusable code for scientific work and for D tends to call itself a "library" instead. I have virtually no formal computer science/software engineering training. Almost all of my knowledge comes from talking to programming geek friends, reading blogs, forums, StackOverflow, etc. I have zero professional experience with the official title of "developer", "software engineer", or something similar.

  Read the article

• Wifi problems after upgrading to 13.10

  - by Simon

  I just upgraded to Ubuntu 13.10, but since the upgrade I don't have internet access via wifi anymore. I can: See networks Connect to a network Ping myself (localhost, 192.168.0.103) I can't: Ping others (including other devices on the same wireless network, including the gateway/router) Resolve hosts Access any other external resource, whether on my own network or on the internet Using Wireshark, I noticed my computer is continuously sending ARP-requests like "Who has 192.168.0.1 [which is the gateway]? Tell 192.168.0.103". It doesn't get any replies though. When I ping another IP-address for which it knows the mac-address (from cache), it turns out a packet loss of 90% occurs, and even if a packet manages to arrive it takes around 3000ms. The output of route -n is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 eth1 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Before upgrading, wifi worked fine. Using other devices, wifi still works fine.Resetting the router didn't help. Ethernet still works after upgrading. Any suggestions? Update: I'm using the wl driver. Here's the relevant output of some commands: lspci | grep Wireless 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) cat /etc/modprobe.d/blacklist.conf [...] blacklist mac80211 blacklist brcm80211 blacklist cfg80211 blacklist lib80211_crypt_tkip blacklist lib80211 blacklist b43 cat /etc/rc.local sudo modprobe -r lib80211 sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_wep.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_tkip.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_ccmp.ko sudo modprobe wl exit 0 The last lines are probably how I got wireless working after the previous upgrade (wireless has been a problem after each upgrade). Update 2: added information about the exact hardware below. The hardware is an integrated device, so I ran lspci -nn | grep -i network. The output is: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >