Search Results

Search found 11954 results on 479 pages for 'gets'.

Page 426/479 | < Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >

  • Time complexity of a sorting algorithm

    - by Passonate Learner
    The two programs below get n integers from file and calculates the sum of ath to bth integers q(number of question) times. I think the upper program has worse time complexity than the lower, but I'm having problems calculating the time complexity of these two algorithms. [input sample] 5 3 5 4 3 2 1 2 3 3 4 2 4 [output sample] 7 5 9 Program 1: #include <stdio.h> FILE *in=fopen("input.txt","r"); FILE *out=fopen("output.txt","w"); int n,q,a,b,sum; int data[1000]; int main() int i,j; fscanf(in,"%d%d",&n,&q); for(i=1;i<=n;i++) fscanf(in,"%d",&data[i]); for i=0;i<q;i++) { fscanf(in,"%d%d",&a,&b); sum=0; for(j=a;j<=b;j++) sum+=data[j]; fprintf(out,"%d\n",sum); } return 0; } Program 2: #include <stdio.h> FILE *in=fopen("input.txt","r"); FILE *out=fopen("output.txt","w"); int n,q,a,b; int data[1000]; int sum[1000]; int main() { int i,j; fscanf(in,"%d%d",&n,&q); for(i=1;i<=n;i++) fscanf(in,"%d",&data[i]); for(i=1;i<=n;i++) sum[i]=sum[i-1]+data[i]; for(i=0;i<q;i++) { fscanf(in,"%d%d",&a,&b); fprintf(out,"%d\n",sum[b]-sum[a-1]); } return 0; } The programs below gets n integers from 1 to m and sorts them. Again, I cannot calculate the time complexity. [input sample] 5 5 2 1 3 4 5 [output sample] 1 2 3 4 5 Program: #include <stdio.h> FILE *in=fopen("input.txt","r") FILE *out=fopen("output.txt","w") int n,m; int data[1000]; int count[1000]; int main() { int i,j; fscanf(in,"%d%d",&n,&m); for(i=0;i<n;i++) { fscanf(in,"%d",&data[i]); count[data[i]]++ } for(i=1;i<=m;i++) { for(j=0;j<count[i];j++) fprintf(out,"%d ",i); } return 0; } It's ironic(or not) that I cannot calculate the time complexity of my own algorithms, but I have passions to learn, so please programming gurus, help me!

    Read the article

  • Uploading a file using post() method of QNetworkAccessManager

    - by user304361
    I'm having some trouble with a Qt application; specifically with the QNetworkAccessManager class. I'm attempting to perform a simple HTTP upload of a binary file using the post() method of the QNetworkAccessManager. The documentation states that I can give a pointer to a QIODevice to post(), and that the class will transmit the data found in the QIODevice. This suggests to me that I ought to be able to give post() a pointer to a QFile. For example: QFile compressedFile("temp"); compressedFile.open(QIODevice::ReadOnly); netManager.post(QNetworkRequest(QUrl("http://mywebsite.com/upload") ), &compressedFile); What seems to happen on the Windows system where I'm developing this is that my Qt application pushes the data from the QFile, but then doesn't complete the request; it seems to be sitting there waiting for more data to show up from the file. The post request isn't "closed" until I manually kill the application, at which point the whole file shows up at my server end. From some debugging and research, I think this is happening because the read() operation of QFile doesn't return -1 when you reach the end of the file. I think that QNetworkAccessManager is trying to read from the QIODevice until it gets a -1 from read(), at which point it assumes there is no more data and closes the request. If it keeps getting a return code of zero from read(), QNetworkAccessManager assumes that there might be more data coming, and so it keeps waiting for that hypothetical data. I've confirmed with some test code that the read() operation of QFile just returns zero after you've read to the end of the file. This seems to be incompatible with the way that the post() method of QNetworkAccessManager expects a QIODevice to behave. My questions are: Is this some sort of limitation with the way that QFile works under Windows? Is there some other way I should be using either QFile or QNetworkAccessManager to push a file via post()? Is this not going to work at all, and will I have to find some other way to upload my file? Any suggestions or hints would be appreciated. Thanks, Don

    Read the article

  • Print Preview Control used in a custom Print Preview Dialog.

    - by Kildareflare
    I have successfully implemented printing and print preview for my app using the PrintDocument, PrintDialog and PrintPreviewDialog classes of .NET. However my app uses a toolkit to improve the appearance of the standard .NET controls. There are versions of most .NET controls in the toolkit, but none for the Print controls. Therefore to ensure that the appearance of these controls matches the rest of the app I am creating a custom PrintPreviewDialog based on a toolkit form and embedding a .NET PrintPrewviewControl in it. My problem is that the PrintPreviewControl always shows "No pages to display". I had no trouble getting this to work using the .NET PrintPreviewDialog and cannot see what I am doing wrong. This is a .NET 2.0 PrintPreviewControl and so I know that I need to call InvalidatePreview() after assigning the PrintDocument. However it does not seem to matter where i place it, the PrintPage event handler never gets called... EDIT: I've just noticed that while the original PrintDocument m_printDocument shows a PrintPageHandler in its properties, the m_printPreviewControl.Document does not. Any ideas why it is being lost..? public class PrintEngine { ...rest of class... public PrintEngine() { m_printDoc.PrintPage += new PrintPageEventHandler(printDoc_PrintPage); } public void PrintPreview() { //ORIGINAL CODE USING .NET DIALOG WORK OK //PrintPreviewDialog dlg1 = new PrintPreviewDialog(); //dlg1.Document = m_printDoc; //PrepareImageForPrinting(); //dlg1.ShowDialog(); //CODE USING MY CUSTOM DIALOG DO NOT WORK? MyPrintPreviewDialog dlg2 = new MyPrintPreviewDialog(); dlg2.Document = m_printDoc; PrepareImageForPrinting(); //Creates the m_printImage List dlg2.ShowDialog(); } private void printDoc_PrintPage(object sender, PrintPageEventArgs e) { e.Graphics.DrawImage(m_printImages[m_currentPage], new Point(0, 0)); m_currentPage++; e.HasMorePages = m_currentPage < m_pagesHigh; } }//end PrintEngine class public class MyPrintPreviewDialog : KryptonForm { public PrintDocument Document { get { return m_printPreviewControl.Document; } set { m_printPreviewControl.Document = value; m_printPreviewControl.InvalidatePreview(); } } public MyPrintPreviewDialog() { InitializeComponent(); m_printPreviewControl = new PrintPreviewControl(); m_printPreviewControl.StartPage = 0; } private void MyPrintPreviewDialog_Load(object sender, EventArgs e) { m_printPreviewControl.Document.DefaultPageSettings = new PageSettings(); m_printPreviewControl.Document.PrinterSettings = new PrinterSettings(); m_printPreviewControl.InvalidatePreview(); } }//end MyPrintPreviewDialog class

    Read the article

  • XML Schema to Java Classes with XJC

    - by nevets1219
    I am using xjc to generate Java classes from the XML schema and the following is an excerpt of the XSD. <xs:element name="NameInfo"> <xs:complexType> <xs:sequence> <xs:choice> <xs:element ref="UnstructuredName"/> <!-- This line --> <xs:sequence> <xs:element ref="StructuredName"/> <xs:element ref="UnstructuredName" minOccurs="0"/> <!-- and this line! --> </xs:sequence> </xs:choice> <xs:element ref="SomethingElse" minOccurs="0"/> </xs:sequence> </xs:complexType> </xs:element> For the most part the generated classes are fine but for the above block I would get something like: public List<Object> getContent() { if (content == null) { content = new ArrayList<Object>(); } return this.content; } with the following comment above it: * You are getting this "catch-all" property because of the following reason: * The field name "UnstructuredName" is used by two different parts of a schema. See: * line XXXX of file:FILE.xsd * line XXXX of file:FILE.xsd * To get rid of this property, apply a property customization to one * of both of the following declarations to change their names: * Gets the value of the content property. I have placed a comment at the end of the two line in question. At the moment, I don't think it will be easy to change the schema since this was decided between vendors and I would not want to go this route (if possible) as it will slow down progress quite a bit. I searched and have found this page, is the external customization what I want to do? I have been mostly working with the generated classes so I'm not entirely familiar with the process that generates these classes. A simple example of the "property customization" would be great! Alternative method of generating the Java classes would be fine as long as the schema can still be used.

    Read the article

  • How do you fix an SVN 409 Conflict Error

    - by NerdStarGamer
    I used to use SVN 1.4 on OS X Leopard and everything was fine. A couple of weeks ago I installed a fresh copy of OS X 10.6. The version of SVN that comes with Snow Leopard is 1.6.5. I went ahead and built my own copy with 1.6.6. I'm using the built in apache server and just hosting repositories locally. Everything appeared to work fine until I actually tried to commit something. Everytime I try to commit a change, I get the following message: Transmitting file data .svn: Commit failed (details follow): svn: MERGE of '/svn/svn2': 409 Conflict (http://localhost) This happens with my old repositories, so I created a couple of new ones. Same deal. I also tried using the 1.6.5 version that comes with the system...same. Finally, I tried upgrading to the latest stable SVN (1.6.9) and still got the same problem. The Apache error logs the following for each failed commit: [Mon Mar 29 19:53:10 2010] [error] [client ::1] Could not MERGE resource "/svn/svn2/!svn/act/d399326f-c20f-424f-bb68-3bb40503b5b1" into "/svn/svn2". [409, #0] [Mon Mar 29 19:53:10 2010] [error] [client ::1] An error occurred while committing the transaction. [409, #2] [Mon Mar 29 19:53:10 2010] [error] [client ::1] Can't open directory '/usr/local/svn/svn2/db/transactions/5-6.txn/\xeb\xa9\x0f\x1f': No such file or directory [409, #2] [Mon Mar 29 19:53:11 2010] [error] [client ::1] Could not DELETE /svn/svn2/!svn/act/d399326f-c20f-424f-bb68-3bb40503b5b1. [500, #0] [Mon Mar 29 19:53:11 2010] [error] [client ::1] could not open transaction. [500, #2] [Mon Mar 29 19:53:11 2010] [error] [client ::1] Can't open file '/usr/local/svn/svn2/db/transactions/5-6.txn/props': No such file or directory [500, #2] And from the access log: ::1 - - [30/Mar/2010:13:02:20 -0400] "OPTIONS /svn/svn2 HTTP/1.1" 401 401 ::1 - user [30/Mar/2010:13:02:20 -0400] "OPTIONS /svn/svn2 HTTP/1.1" 200 188 ::1 - user [30/Mar/2010:13:02:20 -0400] "PROPFIND /svn/svn2 HTTP/1.1" 207 647 ::1 - user [30/Mar/2010:13:02:20 -0400] "PROPFIND /svn/svn2 HTTP/1.1" 207 647 ::1 - user [30/Mar/2010:13:02:20 -0400] "PROPFIND /svn/svn2/!svn/vcc/default HTTP/1.1" 207 398 ::1 - user [30/Mar/2010:13:02:20 -0400] "PROPFIND /svn/svn2/!svn/bln/6 HTTP/1.1" 207 449 ::1 - user [30/Mar/2010:13:02:20 -0400] "REPORT /svn/svn2/!svn/vcc/default HTTP/1.1" 200 1172 Curiously, the commit does actually commit the changes, but the working copy doesn't see that and everything gets screwy. I've tried to Google every variation I can think of for this problem, but the search results are pretty much useless. I'm not using TortoiseSVN or anything special and commits fail on a new repository, so I know it's not a problem with my old repos. Any help would be greatly appreciated.

    Read the article

  • Using Linq to filter a ComboBox.DataSource ?

    - by Pesche Helfer
    Hi board, in another topic, I've stumbled over this very elegant solution by Darin Dimitrov to filter the DataSource of one ComboBox with the selection of another ComboBox: how to filter combobox in combobox using c# combo2.DataSource = ((IEnumerable<string>)c.DataSource) .Where(x => x == (string)combo1.SelectedValue); I would like to do a similar thing, but intead of filtering by a second combobox, I would like to filter by the text of a TextBox. (Basically, instead of choosing from a second ComboBox, the user simply enters his filter in to a TextBox). However, it turned out to be not as straight forward as I had hoped it would be. I tried stuff as the following, but failed miserably: cbWohndresse.DataSource = ((IEnumerable<DataSet>)ds) .Where(x => x.Tables["Adresse"].Select("AdrLabel LIKE '%TEST%'")); cbWohndresse.DisplayMember = "Adresse.AdrLabel"; cbWohndresse.ValueMember = "Adresse.adress_id"; ds is the DataSet which I would like to use as filtered DataSource. "Adresse" is one DataTable in this DataSet. It contains a DataColumn "AdrLabel". Now I would like to display only those "AdrLabel", which contain the string from the user input. (Currently, %TEST% replaces the textbox.text.) The above code fails because the lambda expression does not return Bool. But I am sure, there are also other problems (which type should I use for IEnumerable? Now it's DataSet, but Darin used String. But how could I convert a DataSet to a string? Yes, I am as much newbyish as it gets, my experience is "void", and publicly so. So please forgive me my rather stupid questions. Your help is greatly appreciated, because I can't solve this on my own (tried hard already). Thank you very much! Pesche P.S. I am only using Linq to achieve an uncomplicated filter for the ComboBox (avoiding a View). The rest is not based on Linq, but on oldstyle Ado.NET (ds is filled by an SqlDataAdapter), if that's of any importance.

    Read the article

  • iPad: Tables in Popover Views do not Scroll to Show Selected Row

    - by mahboudz
    I am having two problems with viewcontrollerss in landscape orientation on the iPad. (1) I have two popups which hold tables. The tables should scroll to a specific row to reflect a selection in the main view. Instead, the tables do scroll down some but the actual selected row remains off screen. (2) All my action sheets come up with a width of 320. In Interface Builder, all my views are created in landscape orientation. Only the main Window is not, but I don't see a way to change that. My Configuration: Upon launch, I get the following coordinates for my main window and the main viewcontroller view: Window frame {{0, 0}, {768, 1024}} mainView frame {{0, 0}, {748, 1024}} All other views after that show these coordinates when summoned (when loaded but before being presented): frame of keysig {{0, 0}, {1024, 768}} frame of instrumentSelect {{20, 0}, {1024, 768}} frame of settings {{0, 0}, {467, 300}} In all my viewControllers, i respond to shouldAutorotateToInterfaceOrientation with: return ((interfaceOrientation == UIInterfaceOrientationLandscapeLeft) || (interfaceOrientation == UIInterfaceOrientationLandscapeRight)); Everything (almost) functions as expected. The app launches into one of the two landscape modes. The views (and viewcontrollers) display everything where it belongs and taps work all across the screen as expected. However, I still have the two problems. Problem 1: I have two popups containing tables long enough to run off screen. The tables should scroll to a selected row. They do scroll i.e. they don't start visually at row 1 but they don't scroll enough to actually show the selected row. It almost seems like a UITable internal rect gets created with the wrong number and stays that way but I've checked both of the UITableView's scrollView content coordinates and they seemed reasonable. Problem 2: I think this is related to problem 1 because my actionsheets come up with a width of 320. I can only assume that the iPad allows actionSheets in only 320 or 480 widths and since it somehow thinks that the screen is oriented in portrait mode, it uses the narrower width. There you have it. I can't believe I am still getting hung up on orientation issues. I swear Apple doesn't make it easy to have a landscape app. Any ideas?

    Read the article

  • Java web-app debugging not possible due to direct undeploy on debug

    - by Hendrik
    When i try to debug my webapp it starts up the tomcat server and the application, but shuts down the debugger shortly before the app gets usable. I see the debugging toolbar for a second before it vanishes again, though the app keeps running. Tomcat-log: Listening for transport dt_socket at address: 11555 23.03.2010 01:24:35 org.apache.catalina.core.AprLifecycleListener init INFO: The APR based Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: .:/Library/Java/Extensions:/System/Library/Java/Extensions:/usr/lib/java 23.03.2010 01:24:35 org.apache.coyote.http11.Http11Protocol init INFO: Initializing Coyote HTTP/1.1 on http-8084 23.03.2010 01:24:35 org.apache.catalina.startup.Catalina load INFO: Initialization processed in 847 ms 23.03.2010 01:24:35 org.apache.catalina.core.StandardService start INFO: Starting service Catalina 23.03.2010 01:24:35 org.apache.catalina.core.StandardEngine start INFO: Starting Servlet Engine: Apache Tomcat/6.0.20 log4j:WARN No appenders could be found for logger (org.springframework.web.context.ContextLoader). log4j:WARN Please initialize the log4j system properly. 23.03.2010 01:24:41 org.apache.coyote.http11.Http11Protocol start INFO: Starting Coyote HTTP/1.1 on http-8084 23.03.2010 01:24:41 org.apache.jk.common.ChannelSocket init INFO: JK: ajp13 listening on /0.0.0.0:8009 23.03.2010 01:24:41 org.apache.jk.server.JkMain start INFO: Jk running ID=0 time=0/78 config=null 23.03.2010 01:24:41 org.apache.catalina.startup.Catalina start INFO: Server startup in 5855 ms 23.03.2010 01:24:42 org.apache.catalina.startup.HostConfig checkResources INFO: Undeploying context [] 23.03.2010 01:24:45 org.apache.catalina.core.StandardContext start INFO: Container org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[/] has already been started Debugging log: Attached JPDA debugger to localhost:11555 Checking data source definitions for missing JDBC drivers... Deploying JDBC driver to /Applications/NetBeans/apache-tomcat-6.0.20/lib/mysql-connector-java-5.1.6-bin.jar Stopping Tomcat process... Waiting for Tomcat... Tomcat server stopped. Starting Tomcat process... Waiting for Tomcat... Tomcat server started. Undeploying ... OK - Undeployed application at context path / In-place deployment at /path/to/project/dir/build/web deploy?config=file%3A%2Fvar%2Ffolders%2FZP%2FZPbqxGrbHFaUlXzAfgWV1%2B%2B%2B%2BTQ%2F-Tmp-%2Fcontext734173871283203218.xml&path=/ OK - Deployed application at context path / start?path=/ Start is in progress... OK - Started application at context path / debug-display-browser: Browsing: http://localhost:8084/ connect-client-debugger: BUILD SUCCESSFUL (total time: 18 seconds) System is Netbeans 6.8 on MacOS 10.6.2. Thank you very much, guys!

    Read the article

  • Using a variable in jQuery to perform a function...

    - by DevlshOne
    Can someone tell me what's wrong with this code? It doesn't seem to be recognizing the '#del[' + cid + ']' selector, at all. Which is the exact name of the ID in my PHP code. $(function() { var cid = '<?=$row['c_id'];?>'; $('#del[' + cid + ']').click(function() { alert('clicked!'); var oldqty = <?=$row['qty'];?>; var qtyID = "'" + '#qty' + cid + "'"; alert(qtyID); if ($(qtyID).is(':checked')) { $(this).(function() { $(this).val(0); }); }; if($(qtyID).not(':checked')) { $(this).(function() { $(this).val(0); }); }; }); }); Here's the PHP code that implement $row['c_id']: echo "<input class=\"number aln_center\" type=\"text\" name=\"qty[" . $row['c_id'] . "]\" id=\"qty" . $row['c_id'] . "\" value=\"" . $row['qty'] . "\" size=\"3\" onchange=\"return validateChgMLQty('qty" . $row['c_id'] . "'," . $row['qty'] . ");\" />\n"; echo "<input type=\"hidden\" name=\"telco[" , $row['c_id'] . "]\" id=\"telco" . $row['c_id'] . "\" value=\"" . $row['btelco'] . "\" />\n"; echo "<br />Delete\n"; echo "<input type=\"checkbox\" name=\"del[" . $row['c_id'] . "]\" id=\"del" . $row['c_id'] . "\" />\n"; I'm trying to get the value in the input statement to change to "0" if the "Delete" checkbox is clicked and then return back to it's original contents when unchecked. It never even gets to the first alert box, so it has nothing to do with qtyID and when viewing source, the 'var cid' line is populated with the correct integer passed from PHP variable $row['c_id'].

    Read the article

  • Scheme Formatting Help

    - by Logan
    I've been working on a project for school that takes functions from a class file and turns them into object/classes. The assignment is all about object oriented programming in scheme. My problem however is that my code doesn't format right. The output it gives me whenever I give it a file to pass in wraps the methods of the class in a list, making it so that the class never really gets declared. I can't for the life of me figure out how to get the parenthesis wrapping the method list to remove. I would really appreciate any help. Below is the code and the class file. ;;;; PART1 --- A super-easy set of classes. Just models points and lines. Tests all of the ;; basics of class behavior without touching on anything particularly complex. (class pointInstance (parent:) (constructor_args:) (ivars: (myx 1) (myy 2)) (methods: (getx () myx) (gety () myy) (setx (x) (set! myx x)) (show () (begin (display "[") (display myx) (display ",") (display myy) (display "]"))) )) (require (lib "trace.ss")) ;; Continue reading until you hit the end of the file, all the while ;; building a list with the contents (define load-file (lambda (port) (let ((rec (read port))) (if (eof-object? rec) '() (cons rec (load-file port)))))) ;; Open a port based on a file name using open-input-file (define (load fname) (let ((fport (open-input-file fname))) (load-file fport))) ;(define lis (load "C:\\Users\\Logan\\Desktop\\simpletest.txt")) ;(define lis (load "C:\\Users\\Logan\\Desktop\\complextest.txt")) (define lis (load "C:\\Users\\Logan\\Desktop\\pointinstance.txt")) ;(display (cdaddr (cdddar lis))) (define makeMethodList (lambda (listToMake retList) ;(display listToMake) (cond [(null? listToMake) retList ;(display "The list passed in to parse was null") ] [else (makeMethodList (cdr listToMake) (append retList (list (getMethodLine listToMake)))) ] ) )) ;(trace makeMethodList) ;this works provided you just pass in the function line (define getMethodLine (lambda (functionList) `((eq? (car msg) ,(caar functionList)) ,(caddar functionList)))) (define load-classes (lambda paramList (cond [(null? paramList) (display "Your parameters are null, man.")] [(null? (car paramList))(display "Done creating class definitions.")] [(not (null? (car paramList))) (begin (let* ((className (cadaar paramList)) (classInstanceVars (cdaddr (cddaar paramList))) (classMethodList (cdr (cadddr (cddaar paramList)))) (desiredMethodList (makeMethodList classMethodList '())) ) ;(display "Classname: ") ;(display className) ;(newline)(newline) ;(display "Class Instance Vars: ") ;(display classInstanceVars) ;(newline)(newline) ;(display "Class Method List: ") ;(display classMethodList) ;(newline) ;(display "Desired Method List: ") ;(display desiredMethodList)) ;(newline)(newline) ;---------------------------------------------------- ;do not delete the below code!` `(define ,className (let ,classInstanceVars (lambda msg ;return the function list here (cond ,(makeMethodList classMethodList '()))) )) ;--------------------------------------------------- ))] ) )) (load-classes lis) ;(load-classes lis) ;(load-classes-helper lis) ;(load-classes "simpletest.txt") ;(load-classes "complextest.txt") ;method list ;(display (cdr (cadddr (cddaar <class>))))

    Read the article

  • Running Command via Java ProccesBuilder Different to Running the same in the Shell

    - by Tom Duckering
    I'm tearing my hair out trying to work out why the command I'm executing via Java using a ProcessBuilder & Process is not working. I run the "same" command at the Windows command line and it works as expected. It must be that they're not the same but I can't for the life of me work out why. The command is this: ccm start -nogui -m -q -n ccm_admin -r developer -d /path/to/db/databasename -s http://hostname:8400 -pw Passw0rd789$ The output is should be a single line string that I need to grab and set as an environment variable (hence the v. basic use of the BufferedReader). My Java code, which when it runs the command gets an application error, looks like this with entry point being startCCMAndGetCCMAddress(): private static String ccmAddress = ""; private static final String DATABASE_PATH = "/path/to/db/databasename"; private static final String SYNERGY_URL = "http://hostname:8400"; private static final String USERNAME = "ccm_admin"; private static final String PASSWORD = "Passw0rd789$"; private static final String USER_ROLE = "developer"; public static List<String> getCCMStartCommand() { List<String> command = new ArrayList<String>(); command.add("cmd.exe"); command.add("/C"); command.add("ccm"); command.add("start"); command.add("-nogui"); command.add("-m"); command.add("-q"); command.add("-n "+USERNAME); command.add("-r "+USER_ROLE); command.add("-d "+DATABASE_PATH); command.add("-s "+SYNERGY_URL); command.add("-pw "+PASSWORD); return command; } private static String startCCMAndGetCCMAddress() throws IOException, CCMCommandException { int processExitValue = 0; List<String> command = getCCMStartCommand(); System.err.println("Will run: "+command); ProcessBuilder procBuilder = new ProcessBuilder(command); procBuilder.redirectErrorStream(true); Process proc = procBuilder.start(); BufferedReader outputBr = new BufferedReader(new InputStreamReader(proc.getInputStream())); try { proc.waitFor(); } catch (InterruptedException e) { processExitValue = proc.exitValue(); } String outputLine = outputBr.readLine(); outputBr.close(); if (processExitValue != 0) { throw new CCMCommandException("Command failed with output: " + outputLine); } if (outputLine == null) { throw new CCMCommandException("Command returned zero but there was no output"); } return outputLine; } The output of the System.err.println(...) is: Will run: [cmd.exe, /C, ccm, start, -nogui, -m, -q, -n ccm_admin, -r developer, -d /path/to/db/databasename, -s http://hostname:8400, -pw Passw0rd789$]

    Read the article

  • Add objects to association in OnPreInsert, OnPreUpdate

    - by Dmitriy Nagirnyak
    Hi, I have an event listener (for Audit Logs) which needs to append audit log entries to the association of the object: public Company : IAuditable { // Other stuff removed for bravety IAuditLog IAuditable.CreateEntry() { var entry = new CompanyAudit(); this.auditLogs.Add(entry); return entry; } public virtual IEnumerable<CompanyAudit> AuditLogs { get { return this.auditLogs } } } The AuditLogs collection is mapped with cascading: public class CompanyMap : ClassMap<Company> { public CompanyMap() { // Id and others removed fro bravety HasMany(x => x.AuditLogs).AsSet() .LazyLoad() .Access.ReadOnlyPropertyThroughCamelCaseField() .Cascade.All(); } } And the listener just asks the auditable object to create log entries so it can update them: internal class AuditEventListener : IPreInsertEventListener, IPreUpdateEventListener { public bool OnPreUpdate(PreUpdateEvent ev) { var audit = ev.Entity as IAuditable; if (audit == null) return false; Log(audit); return false; } public bool OnPreInsert(PreInsertEvent ev) { var audit = ev.Entity as IAuditable; if (audit == null) return false; Log(audit); return false; } private static void LogProperty(IAuditable auditable) { var entry = auditable.CreateAuditEntry(); entry.CreatedAt = DateTime.Now; entry.Who = GetCurrentUser(); // Might potentially execute a query. // Also other information is set for entry here } } The problem with it though is that it throws TransientObjectException when commiting the transaction: NHibernate.TransientObjectException : object references an unsaved transient instance - save the transient instance before flushing. Type: CompanyAudit, Entity: CompanyAudit at NHibernate.Engine.ForeignKeys.GetEntityIdentifierIfNotUnsaved(String entityName, Object entity, ISessionImplementor session) at NHibernate.Type.EntityType.GetIdentifier(Object value, ISessionImplementor session) at NHibernate.Type.ManyToOneType.NullSafeSet(IDbCommand st, Object value, Int32 index, Boolean[] settable, ISessionImplementor session) at NHibernate.Persister.Collection.AbstractCollectionPersister.WriteElement(IDbCommand st, Object elt, Int32 i, ISessionImplementor session) at NHibernate.Persister.Collection.AbstractCollectionPersister.PerformInsert(Object ownerId, IPersistentCollection collection, IExpectation expectation, Object entry, Int32 index, Boolean useBatch, Boolean callable, ISessionImplementor session) at NHibernate.Persister.Collection.AbstractCollectionPersister.Recreate(IPersistentCollection collection, Object id, ISessionImplementor session) at NHibernate.Action.CollectionRecreateAction.Execute() at NHibernate.Engine.ActionQueue.Execute(IExecutable executable) at NHibernate.Engine.ActionQueue.ExecuteActions(IList list) at NHibernate.Engine.ActionQueue.ExecuteActions() at NHibernate.Event.Default.AbstractFlushingEventListener.PerformExecutions(IEventSource session) at NHibernate.Event.Default.DefaultFlushEventListener.OnFlush(FlushEvent event) at NHibernate.Impl.SessionImpl.Flush() at NHibernate.Transaction.AdoTransaction.Commit() As the cascading is set to All I expected NH to handle this. I also tried to modify the collection using state but pretty much the same happens. So the question is what is the last chance to modify object's associations before it gets saved? Thanks, Dmitriy.

    Read the article

  • AccessViolationException thrown

    - by user255371
    Hi, I’m working on a project that’s written in C# and uses a C++ dll to communicate with a robot. Originally the software was written in C# VS 2003 and was converted to VS 2008 (no change to the code) using .Net 2.0. Now, I started seeing the “Attempted to read or write protected memory…” on some computers. The Access violation error is always thrown when the code calls a particular method from the dll, however, that very same method is called over and over throughout the task and executes fine, just sometimes it throws the error. Also, the robot seems to execute the command fine which tells me that the values passed into the dll exist and thus are accessible. The software with the .Net 1.1 has been used for years and worked fine without ever throwing any memory errors. Now that it has been using .Net 2.0 it throws errors on some computers only. I’m not sure what’s causing the issue. I ruled out inappropriate calling (incorrect marshalling …) of the dll methods as it has been working fine with .Net 1.1 for years and thus should work fine in .Net 2.0 as well. I’ve seen some posts suggesting that it could be the GC, but then again why would it only happen on this one computer and only sometimes. Also, the values passed in are all global variables in the C# code and thus they should exist until the application is shut down and GC has no business moving any of those around or deleting them. Another observation, as I mentioned above, the robot executes the command normally which means that it gets all its necessary values. Not sure what the C++ dll’s method would do at the end where the GC could mess up stuff. It shouldn’t try to delete the global variables passed in and the method is not modifying those variables either (I’m not expecting any return values through the passed in values, the only return value is the method return which again shouldn’t have anything to do with GC.) One important piece of information I should add is that I have no access to the C++ code and thus cannot make any changes there. The fix has to come through the C# code or some settings on the computer or something else that I am in control of. Any help greatly appreciated. Thanks. Code snippet: Original method call in VS 2003 [DllImport("TOOLB32.dll",EntryPoint="TbxMoveWash")] public static extern int TbxMoveWash(int tArmId, string lpszCarrierRackId, int eZSelect, int[] lpTipSet, int tVol, bool bFastW); which I modified after seeing the error to the following (but the error still occurs): [DllImport("TOOLB32.dll",EntryPoint="TbxMoveWash")] public static extern int TbxMoveWash(int tArmId, string lpszCarrierRackId, int eZSelect, [MarshalAs(UnmanagedType.LPArray, SizeConst = 8)] int[] lpTipSet, int tVol, bool bFastW);

    Read the article

  • Stuck on the logic of creating tags for posts (like SO tags)? (PHP)

    - by ggfan
    I am stuck on how to create tags for each post on my site. I am not sure how to add the tags into database. Currently... I have 3 tables: +---------------------+ +--------------------+ +---------------------+ | Tags | | Posting | | PostingTags | +---------------------+ +--------------------+ +---------------------+ | + TagID | | + posting_id | | + posting_id | +---------------------+ +--------------------+ +---------------------+ | + TagName | | + title | | + tagid | +---------------------+ +--------------------+ +---------------------+ The Tags table is just the name of the tags(ex: 1 PHP, 2 MySQL,3 HTML) The posting (ex: 1 What is PHP?, 2 What is CSS?, 3 What is HTML?) The postingtags shows the relation between posting and tags. When users type a posting, I insert the data into the "posting" table. It automatically inserts the posting_id for each post(posting_id is a primary key). $title = mysqli_real_escape_string($dbc, trim($_POST['title'])); $query4 = "INSERT INTO posting (title) VALUES ('$title')"; mysqli_query($dbc, $query4); HOWEVER, how do I insert the tags for each post? When users are filling out the form, there is a checkbox area for all the tags available and they check off whatever tags they want. (I am not doing where users type in the tags they want just yet) This shows each tag with a checkbox. When users check off each tag, it gets stored in an array called "postingtag[]". <label class="styled">Select Tags:</label> <?php $dbc = mysqli_connect(DB_HOST, DB_USER, DB_PASSWORD, DB_NAME); $query5 = "SELECT * FROM tags ORDER BY tagname"; $data5 = mysqli_query($dbc, $query5); while ($row5 = mysqli_fetch_array($data5)) { echo '<li><input type="checkbox" name="postingtag[]" value="'.$row5['tagname'].'" ">'.$row5['tagname'].'</li>'; } ?> My question is how do I insert the tags in the array ("postingtag") into my "postingtags" table? Should I... $postingtag = $_POST["postingtag"]; foreach($postingtag as $value){ $query5 = "INSERT INTO postingtags (posting_id, tagID) VALUES (____, $value)"; mysqli_query($dbc, $query5); } 1.In this query, how do I get the posting_id value of the post? I am stuck on the logic here, so if someone can help me explain the next step, I would appreciate it! Is there an easier way to insert tags?

    Read the article

  • Filtering a collection based on filtering rules

    - by Mike
    I have an observable collection of Entities, with each entity having a status added, deleted, modified and cancelled. I have four buttons (toggle) when clicked should filter my collection as below: If I select the button Added, then my collection should contain entities with status added. If I select the button Deleted and Added, then my collection should contain entities with status Deleted AND entities with status Added, none of the rest. If I select the button Deleted,Added and Modified, then my collection should contain entities with status Deleted, Added AND Modified. . . so on. If I unselect one of the buttons, it should remove those entities from the collection with that status. For example if I unselect Deleted, but select Added and Modified, then my collection should contain items with Added and Modified status and NOT Deleted ones. For implementing this I have created a master collection and a filtered collection. The Filter collection gets filtered based on the selections and unselections. The following is my code: private bool _clickedAdded; public bool ClickedAdded { get { return _clickedAdded; } set { _clickedAdded = value; if(!_clickedAdded) FilterAny(typeof(Added)); } } private bool _clickedDeleted; public bool ClickedDeleted { get { return _clickedDeleted; } set { _clickedDeleted = value; if (!_clickedDeleted) FilterAny(typeof(Deleted)); } } private bool _clickedModified; public bool ClickedModified { get { return _clickedModified; } set { _clickedModified = value; if (!_clickedModified) FilterAny(typeof(Modified)); } } private void FilterAny(Type status) { Func<Entity, bool> predicate = entity => entity.Status.GetType() != status; var filteredItems = MasterEntites.Where(predicate); FilteredEntities = new ObservableCollection<Entity>(filteredItems); } This however breaks the above rules - for example if I have all selected, and then I remove Added followed by deleted then it still shows the list of Added, Modified and Cancelled. It should be just Modified and Cancelled in the filtered collection. Can you please help me in solving this issue? Also do I need 2 different list to solve this. Please note that I'm using .NET 3.5.

    Read the article

  • Does subTable support reRender?

    - by Tom
    Here is a minimal rich:dataTable with an a4j:commandLink inside. When clicked it sends an AJAX request to my bean and reRenders the dataTable. <rich:dataTable id="dataTable" value="#{carManager.all}" var="item"> <rich:column> <f:facet name="header">name</f:facet> <h:outputText value="#{item.name}" /> </rich:column> <rich:column> <f:facet name="header">action</f:facet> <a4j:commandLink reRender="dataTable" value="Delete" action="#{carForm.delete}"> <f:setPropertyActionListener value="#{item.id}" target="#{carForm.id}" /> <f:param name="from" value="list" /> </a4j:commandLink> </rich:column> </rich:dataTable> The exmaple obove works fine so far. But when I add a rich:subTable to the table, reRendering fails... <rich:dataTable id="dataTable" value="#{garageManager.all}" var="garage"> <f:facet name="header"> <rich:columnGroup> <rich:column>name</rich:column> <rich:column>action</rich:column> </rich:columnGroup> </f:facet> <rich:column colspan="2"> <h:outputText value="#{garage.name}" /> </rich:column> <rich:subTable value="#{garage.cars}" var="car"> <rich:column><h:ouputText value="#{car.name}" /></rich:column> <rich:column> <a4j:commandLink reRender="dataTable" value="Delete" action="#{carForm.delete}"> <f:setPropertyActionListener value="#{item.id}" target="#{carForm.id}" /> <f:param name="from" value="list" /> </a4j:commandLink> </rich:column> </rich:column> </rich:dataTable> Now the rich:dataTable is not rerendered but the item gets deleted since the item does not show up after a complete page refresh. Does subTable support reRender the way i'd like to use it here? Tanks Tom

    Read the article

  • PHP: Can pcntl_alarm() and socket_select() peacefully exist in the same thread?

    - by DWilliams
    I have a PHP CLI script mostly written that functions as a chat server for chat clients to connect to (don't ask me why I'm doing it in PHP, thats another story haha). My script utilizes the socket_select() function to hang execution until something happens on a socket, at which point it wakes up, processes the event, and waits until the next event. Now, there are some routine tasks that I need performed every 30 seconds or so (check of tempbanned users should be unbanned, save user databases, other assorted things). From what I can tell, PHP doesn't have very great multi-threading support at all. My first thought was to compare a timestamp every time the socket generates an event and gets the program flowing again, but this is very inconsistent since the server could very well sit idle for hours and not have any of my cleanup routines executed. I came across the PHP pcntl extensions, and it lets me use assign a time interval for SIGALRM to get sent and a function get executed every time it's sent. This seems like the ideal solution to my problem, however pcntl_alarm() and socket_select() clash with each other pretty bad. Every time SIGALRM is triggered, all sorts of crazy things happen to my socket control code. My program is fairly lengthy so I can't post it all here, but it shouldn't matter since I don't believe I'm doing anything wrong code-wise. My question is: Is there any way for a SIGALRM to be handled in the same thread as a waiting socket_select()? If so, how? If not, what are my alternatives here? Here's some output from my program. My alarm function simply outputs "Tick!" whenever it's called to make it easy to tell when stuff is happening. This is the output (including errors) after allowing it to tick 4 times (there were no actual attempts at connecting to the server despite what it says): [05-28-10 @ 20:01:05] Chat server started on 192.168.1.28 port 4050 [05-28-10 @ 20:01:05] Loaded 2 users from file PHP Notice: Undefined offset: 0 in /home/danny/projects/PHPChatServ/ChatServ.php on line 112 PHP Warning: socket_select(): unable to select [4]: Interrupted system call in /home/danny/projects/PHPChatServ/ChatServ.php on line 116 [05-28-10 @ 20:01:15] Tick! PHP Warning: socket_accept(): unable to accept incoming connection [4]: Interrupted system call in /home/danny/projects/PHPChatServ/ChatServ.php on line 126 [05-28-10 @ 20:01:25] Tick! PHP Warning: socket_getpeername() expects parameter 1 to be resource, boolean given in /home/danny/projects/PHPChatServ/ChatServ.php on line 129 [05-28-10 @ 20:01:25] Accepting socket connection from PHP Notice: Undefined offset: 1 in /home/danny/projects/PHPChatServ/ChatServ.php on line 112 PHP Warning: socket_select(): unable to select [4]: Interrupted system call in /home/danny/projects/PHPChatServ/ChatServ.php on line 116 [05-28-10 @ 20:01:35] Tick! PHP Warning: socket_accept(): unable to accept incoming connection [4]: Interrupted system call in /home/danny/projects/PHPChatServ/ChatServ.php on line 126 [05-28-10 @ 20:01:45] Tick! PHP Warning: socket_getpeername() expects parameter 1 to be resource, boolean given in /home/danny/projects/PHPChatServ/ChatServ.php on line 129 [05-28-10 @ 20:01:45] Accepting socket connection from PHP Notice: Undefined offset: 2 in /home/danny/projects/PHPChatServ/ChatServ.php on line 112

    Read the article

  • How to Access a decendant object's internal method in C#

    - by Giovanni Galbo
    I'm trying to access a method that is marked as internal in the parent class (in its own assembly) in an object that inherits from the same parent. Let me explain what I'm trying to do... I want to create Service classes that return IEnumberable with an underlying List to non-Service classes (e.g. the UI) and optionally return an IEnumerable with an underlying IQueryable to other services. I wrote some sample code to demonstrate what I'm trying to accomplish, shown below. The example is not real life, so please remember that when commenting. All services would inherit from something like this (only relevant code shown): public class ServiceBase<T> { protected readonly ObjectContext _context; protected string _setName = String.Empty; public ServiceBase(ObjectContext context) { _context = context; } public IEnumerable<T> GetAll() { return GetAll(false); } //These are not the correct access modifiers.. I want something //that is accessible to children classes AND between descendant classes internal protected IEnumerable<T> GetAll(bool returnQueryable) { var query = _context.CreateQuery<T>(GetSetName()); if(returnQueryable) { return query; } else { return query.ToList(); } } private string GetSetName() { //Some code... return _setName; } } Inherited services would look like this: public class EmployeeService : ServiceBase<Employees> { public EmployeeService(ObjectContext context) : base(context) { } } public class DepartmentService : ServiceBase<Departments> { private readonly EmployeeService _employeeService; public DepartmentService(ObjectContext context, EmployeeService employeeService) : base(context) { _employeeService = employeeService; } public IList<Departments> DoSomethingWithEmployees(string lastName) { //won't work because method with this signature is not visible to this class var emps = _employeeService.GetAll(true); //more code... } } Because the parent class lives is reusable, it would live in a different assembly than the child services. With GetAll(bool returnQueryable) being marked internal, the children would not be able to see each other's GetAll(bool) method, just the public GetAll() method. I know that I can add a new internal GetAll method to each service (or perhaps an intermediary parent class within the same assembly) so that each child service within the assembly can see each other's method; but it seems unnecessary since the functionality is already available in the parent class. For example: internal IEnumerable<Employees> GetAll(bool returnIQueryable) { return base.GetAll(returnIQueryable); } Essentially what I want is for services to be able to access other service methods as IQueryable so that they can further refine the uncommitted results, while everyone else gets plain old lists. Any ideas?

    Read the article

  • Where does the version number come from?

    - by Robert Schneider
    I have a version control system (e.g. Subversion) and now I'd like to set up a build process. Now I have to create a version number and insert it into the system. But where does the version number come from and get into? Assume I want to use this common <major.<minor.<bugfix/revision scheme. Should I pass a number to the build script? Or should I pass arguments like increaseMajor, increaseMinor, increaseRevision? Or would you recommend to create a branch with the number which will be detected by the build script? I could imagine that the major and minor version number have to be put in manually somewhere. The revision number could be increased automaically. But still I don't know where I would place the major and minor number. In my case I have some php files that I would like to zip, but before I have to insert some version numbers into php file. I have edited this post to try to make my request clearer: I do not use Subversion, that was just an example. And I don't want to discuss the version number scheme. Imagine I want to create version 3.5.0 or 3.5.1. Would I pass this version number to a build script? Would the script create the branch in the repository with this number or would it expect that someone has already created this branch? Manually? Or would the build script look for name of the branch (e.g. '3.5.1) and use it for further things? And does the version number come from my brain or is it automatically created (I guess the major/minor number it comes from my little brain and revision number is created)? Or would you place the number into a file that may gets inserted into the repository? I guess if would use a release management tool I would insert the version number there. But I don't use one yet.

    Read the article

  • C# Confusing Results from Performance Test

    - by aip.cd.aish
    I am currently working on an image processing application. The application captures images from a webcam and then does some processing on it. The app needs to be real time responsive (ideally < 50ms to process each request). I have been doing some timing tests on the code I have and I found something very interesting (see below). clearLog(); log("Log cleared"); camera.QueryFrame(); camera.QueryFrame(); log("Camera buffer cleared"); Sensor s = t.val; log("Sx: " + S.X + " Sy: " + S.Y); Image<Bgr, Byte> cameraImage = camera.QueryFrame(); log("Camera output acuired for processing"); Each time the log is called the time since the beginning of the processing is displayed. Here is my log output: [3 ms]Log cleared [41 ms]Camera buffer cleared [41 ms]Sx: 589 Sy: 414 [112 ms]Camera output acuired for processing The timings are computed using a StopWatch from System.Diagonostics. QUESTION 1 I find this slightly interesting, since when the same method is called twice it executes in ~40ms and when it is called once the next time it took longer (~70ms). Assigning the value can't really be taking that long right? QUESTION 2 Also the timing for each step recorded above varies from time to time. The values for some steps are sometimes as low as 0ms and sometimes as high as 100ms. Though most of the numbers seem to be relatively consistent. I guess this may be because the CPU was used by some other process in the mean time? (If this is for some other reason, please let me know) Is there some way to ensure that when this function runs, it gets the highest priority? So that the speed test results will be consistently low (in terms of time). EDIT I change the code to remove the two blank query frames from above, so the code is now: clearLog(); log("Log cleared"); Sensor s = t.val; log("Sx: " + S.X + " Sy: " + S.Y); Image<Bgr, Byte> cameraImage = camera.QueryFrame(); log("Camera output acuired for processing"); The timing results are now: [2 ms]Log cleared [3 ms]Sx: 589 Sy: 414 [5 ms]Camera output acuired for processing The next steps now take longer (sometimes, the next step jumps to after 20-30ms, while the next step was previously almost instantaneous). I am guessing this is due to the CPU scheduling. Is there someway I can ensure the CPU does not get scheduled to do something else while it is running through this code?

    Read the article

  • progressIndicator does not update till about 10 seconds after awakeFromNib occures

    - by theprojectabot
    I have been trying to get this one section of my UI to immediatly up date when the document loads into view. The awakeFromNib fires the pasted code and then starts a timer to repeat every 10 seconds... I load a default storage location: ~/Movies... which shows up immediately.. yet the network location that is saved in the document that gets pulled from the XML only seems to show up after the second firing of the - (void)updateDiskSpaceDisplay timer. I have set breakpoints and know that the ivars that contain the values that are being put into the *fileSystemAttributes is the network location right when the awakeFromNib occurs... Im confused why it magically appears after the second time firing instead of immediately displaying the write values. - (void)updateDiskSpaceDisplay { // Obtain information about the file system used on the selected storage path. NSError *error = NULL; NSDictionary *fileSystemAttributes = [[NSFileManager defaultManager] attributesOfFileSystemForPath:[[[self settings] containerSettings] storagePath] error:&error]; if( !fileSystemAttributes ) return; // Get the byte capacity of the drive. long long byteCapacity = [[fileSystemAttributes objectForKey:NSFileSystemSize] unsignedLongLongValue]; // Get the number of free bytes. long long freeBytes = [[fileSystemAttributes objectForKey:NSFileSystemFreeSize] unsignedLongLongValue]; // Update the level indicator, and the text fields to show the current information. [totalDiskSpaceField setStringValue:[self formattedStringFromByteCount:byteCapacity]]; [totalDiskSpaceField setNeedsDisplay:YES]; [usedDiskSpaceField setStringValue:[self formattedStringFromByteCount:(byteCapacity - freeBytes)]]; [usedDiskSpaceField setNeedsDisplay:YES]; [diskSpaceIndicator setMaxValue:100]; [diskSpaceIndicator setIntValue:(((float) (byteCapacity - freeBytes) / (float) byteCapacity) * 100.0)]; [diskSpaceIndicator display:YES]; } thoughts? my awakeFromNib: - (void)awakeFromNib { [documentWindow setAcceptsMouseMovedEvents:YES]; [documentWindow setDelegate:self]; [self updateSettingsDisplay]; [self updateDiskSpaceDisplay]; [self setDiskSpaceUpdateTimer:[NSTimer scheduledTimerWithTimeInterval:10.0 target:self selector:@selector(updateDiskSpaceDisplay) userInfo:NULL repeats:YES]]; [self setUpClipInfoTabButtons]; [self performSelector:@selector(setupEngineController) withObject:NULL afterDelay:0.1]; }

    Read the article

  • Drawing performance with CGImageCreateWithJPEGDataProvider?

    - by Rnegi
    I've actually curious about this for the iPhone. I am getting an MJPEG stream from a server and trying to render it natively on the iphone (without the use of safari class). Reasons for this is because the safari class while CAN render MJPEG natively, does not do so at the framerate I would like. So I tried drawing it natively, but I've come up with performance issues, namely a syncing issue between what I'm getting from the server and what I am able to draw onto the screen of the phone. (There should be a little lag, but the drift gets really bad, which is what I want to avoid). So I have a connection set up to my server and I do get the JPEGS. It's just data I insert into a NSMutableArray buffer CFMutableDataRef _t_data_ref = (CFMutableDataRef)[_buffer_array objectAtIndex:0]; //CGDataProviderRef imgDataProvider = CGDataProviderCreateWithCFData (_cf_buffer_data); CGDataProviderRef imgDataProvider = CGDataProviderCreateWithCFData(_t_data_ref); CGImageRef image = CGImageCreateWithJPEGDataProvider(imgDataProvider, NULL, true, kCGRenderingIntentDefault); CGImageRef imgRef = image; CGContextDrawImage(context, CGRectMake(0, 17, 380, 285), imgRef); CGImageRelease(image); CGDataProviderRelease(imgDataProvider); please note this is the gist of my code, but it should summarize what I am trying to accomplish with regards to drawing. Also in order to get the framerate in sync, I had to detach a separate thread that sleeps X seconds and calls [self setNeedsDisplay]. NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; // Top-level pool while(1) { //[NSThread sleepForTimeInterval:TIMER_REFRESH_VALUE]; //sleep(unsigned int ); usleep(MICRO_REFRESH_VALUE); if ([_buffer_array count] > 10) { //NSLog(@"stuff %d", [_buffer_array count]); //[self setNeedsDisplay]; [self performSelectorOnMainThread:@selector(setNeedsDisplay) withObject:nil waitUntilDone:NO]; } } [pool release]; // Release the objects in the pool. My buffer of jpeg data actually fills up quite quick, but I can't seem to actually consume what i'm getting at the same rate, actually much slower. Are there any documents that can describe what kind of performance tuning I can do to make it go faster when rendering the JPEG to the screen? Or am I kind of stuck here? Thanks!

    Read the article

  • Passing a ManagedObjectContext to a second view

    - by amo
    I'm writing my first iPhone/Cocoa app. It has two table views inside a navigation view. When you touch a row in the first table view, you are taken to the second table view. I would like the second view to display records from the CoreData entities related to the row you touched in the first view. I have the CoreData data showing up fine in the first table view. You can touch a row and go to the second table view. I'm able to pass info from the selected object from the first to the second view. But I cannot get the second view to do its own CoreData fetching. For the life of me I cannot get the managedObjectContext object to pass to the second view controller. I don't want to do the lookups in the first view and pass a dictionary because I want to be able to use a search field to refine results in the second view, as well as insert new entries to the CoreData data from there. Here's the function that transitions from the first to the second view. - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { // Navigation logic may go here -- for example, create and push another view controller. NSManagedObject *selectedObject = [[self fetchedResultsController] objectAtIndexPath:indexPath]; SecondViewController *secondViewController = [[SecondViewController alloc] initWithNibName:@"SecondView" bundle:nil]; secondViewController.tName = [[selectedObject valueForKey:@"name"] description]; secondViewController.managedObjectContext = [self managedObjectContext]; [self.navigationController pushViewController:secondViewController animated:YES]; [secondViewController release]; } And this is the function inside SecondViewController that crashes: - (void)viewDidLoad { [super viewDidLoad]; self.title = tName; NSError *error; if (![[self fetchedResultsController] performFetch:&error]) { // <-- crashes here // Handle the error... } } - (NSFetchedResultsController *)fetchedResultsController { if (fetchedResultsController != nil) { return fetchedResultsController; } /* Set up the fetched results controller. */ // Create the fetch request for the entity. NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] init]; // Edit the entity name as appropriate. // **** crashes on the next line because managedObjectContext == 0x0 NSEntityDescription *entity = [NSEntityDescription entityForName:@"SecondEntity" inManagedObjectContext:managedObjectContext]; [fetchRequest setEntity:entity]; // <snip> ... more code here from Apple template, never gets executed because of the crashing return fetchedResultsController; } Any ideas on what I am doing wrong here? managedObjectContext is a retained property. UPDATE: I inserted a NSLog([[managedObjectContext registeredObjects] description]); in viewDidLoad and it appears managedObjectContext is being passed just fine. Still crashing, though. Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: '+entityForName: could not locate an NSManagedObjectModel for entity name 'SecondEntity''

    Read the article

  • C# - WebBrowser control seems to cache screenshots

    - by Justin
    Hey, I'm using the WebBrowser control in an ASP.NET MVC 2 app (don't judge, I'm doing it in an admin section only to be used by me), here's the code: public static class Screenshot { private static string _url; private static int _width; private static byte[] _bytes; public static byte[] Get(string url) { // This method gets a screenshot of the webpage // rendered at its full size (height and width) return Get(url, 50); } public static byte[] Get(string url, int width) { //set properties. _url = url; _width = width; //start screen scraper. var webBrowseThread = new Thread(new ThreadStart(TakeScreenshot)); webBrowseThread.SetApartmentState(ApartmentState.STA); webBrowseThread.Start(); //check every second if it got the screenshot yet. //i know, the thread sleep is terrible, but it's the secure section, don't judge... int numChecks = 20; for (int k = 0; k < numChecks; k++) { Thread.Sleep(1000); if (_bytes != null) { return _bytes; } } return null; } private static void TakeScreenshot() { try { //load the webpage into a WebBrowser control. using (WebBrowser wb = new WebBrowser()) { wb.ScrollBarsEnabled = false; wb.ScriptErrorsSuppressed = true; wb.Navigate(_url); while (wb.ReadyState != WebBrowserReadyState.Complete) { Application.DoEvents(); } //set the size of the WebBrowser control. //take Screenshot of the web pages full width. wb.Width = wb.Document.Body.ScrollRectangle.Width; //take Screenshot of the web pages full height. wb.Height = wb.Document.Body.ScrollRectangle.Height; //get a Bitmap representation of the webpage as it's rendered in the WebBrowser control. var bitmap = new Bitmap(wb.Width, wb.Height); wb.DrawToBitmap(bitmap, new Rectangle(0, 0, wb.Width, wb.Height)); //resize. var height = _width * (bitmap.Height / bitmap.Width); var thumbnail = bitmap.GetThumbnailImage(_width, height, null, IntPtr.Zero); //convert to byte array. var ms = new MemoryStream(); thumbnail.Save(ms, System.Drawing.Imaging.ImageFormat.Jpeg); _bytes = ms.ToArray(); } } catch(Exception exc) {//TODO: why did screenshot fail? string message = exc.Message; } } This works fine for the first screenshot that I take, however if I try to take subsequent screenshots of different URL's, it saves screenshots of the first url for the new url, or sometimes it'll save the screenshot from 3 or 4 url's ago. I'm creating a new instance of WebBrowser for each screenshot and am disposing of it properly with the "using" block, any idea why it's behaving this way? Thanks, Justin

    Read the article

  • nextSibling issue, again... sorry...

    - by SoLoGHoST
    Ok, I am using insertRow to insert a TR element into a table, but for some reason it doesn't count that inserted TR element as a sibling of the others when I do nextSibling on it. For example, consider the following table. <table id="myTable"> <tr id="row_0"> <td colspan="3">Row 1</td> </tr> <tr id="tr_0_0"> <td>Option 1</td> <td>Option2</td> <td>Option 3</td> </tr> <tr id="tr_0_1"> <td>Option 1</td> <td>Option 2</td> <td>Option 3</td> </tr> </table> So after I do this: var lTable = document.getElementById("myTable"); var trEle = lTable.insertRow(-1); trEle.id = "tr_0_2"; var cell1 = trEle.insertCell(0); cell1.innerHTML = "Option 1"; var cell2 = trEle.insertCell(1); cell2.innerHTML = "Option 2"; var cell3 = trEle.insertCell(-1); cell3.innerHTML = "Option 3"; Then I use this approach to get all of the siblings, but it NEVER gives me the last sibling in here, but ONLY if it's been added via insertRow, because it gets all nextSiblings just fine, but once I add a sibling via insertRow it never gives me that last Sibling, argggg.... var tempTr = document.getElementById("row_0"); var totalSibs = 0; while(tempTr.nextSibling != null) { var tempId = tempTr.id; // If no id, not an element, or not a tr_0 id. if (!tempId || tempTr.nodeType != 1 || tempId.indexOf("tr_0") != 0) { tempTr = tempTr.nextSibling; continue; } // This NEVER ALERTS the last id of the row that was inserted using insertRow, arggg. alert(tempId); totalSibs++; tempTr = tempTr.nextSibling; } So, totalSibs should return 3 because after I inserted the row, there should be 3 Siblings, but instead returns 2 and never counts the 3rd Sibling.... arggg. Can someone please help me here?? Thank a lot, you guys/gals are Awesome!

    Read the article

< Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >