Search Results

Search found 28914 results on 1157 pages for 'cloud development'.

Page 433/1157 | < Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440  | Next Page >

  • Why would GLCapabilities.setHardwareAccelerated(true/false) have no effect on performance?

    - by Luke
    I've got a JOGL application in which I am rendering 1 million textures (all the same texture) and 1 million lines between those textures. Basically it's a ball-and-stick graph. I am storing the vertices in a vertex array on the card and referencing them via index arrays, which are also stored on the card. Each pass through the draw loop I am basically doing this: gl.glBindBuffer(GL.GL_ARRAY_BUFFER, <buffer id>); gl.glBindBuffer(GL.GL_ELEMENT_ARRAY_BUFFER, <buffer id>); gl.glDrawElements(GL.GL_POINTS, <size>, GL.GL_UNSIGNED_INT, 0); gl.glBindBuffer(GL.GL_ARRAY_BUFFER, <buffer id>); gl.glBindBuffer(GL.GL_ELEMENT_ARRAY_BUFFER, <buffer id>); gl.glDrawElements(GL.GL_LINES, <size>, GL.GL_UNSIGNED_INT, 0); I noticed that the JOGL library is pegging one of my CPU cores. Every frame, the run method internal to the library is taking quite long. I'm not sure why this is happening since I have called setHardwareAccelerated(true) on the GLCapabilities used to create my canvas. What's more interesting is that I changed it to setHardwareAccelerated(false) and there was no impact on the performance at all. Is it possible that my code is not using hardware rendering even when it is set to true? Is there any way to check? EDIT: As suggested, I have tested breaking my calls up into smaller chunks. I have tried using glDrawRangeElements and respecting the limits that it requests. All of these simply resulted in the same pegged CPU usage and worse framerates. I have also narrowed the problem down to a simpler example where I just render 4 million textures (no lines). The draw loop then just doing this: gl.glEnableClientState(GL.GL_VERTEX_ARRAY); gl.glEnableClientState(GL.GL_INDEX_ARRAY); gl.glClear(GL.GL_COLOR_BUFFER_BIT | GL.GL_DEPTH_BUFFER_BIT); gl.glMatrixMode(GL.GL_MODELVIEW); gl.glLoadIdentity(); <... Camera and transform related code ...> gl.glEnableVertexAttribArray(0); gl.glEnable(GL.GL_TEXTURE_2D); gl.glAlphaFunc(GL.GL_GREATER, ALPHA_TEST_LIMIT); gl.glEnable(GL.GL_ALPHA_TEST); <... Bind texture ...> gl.glBindBuffer(GL.GL_ARRAY_BUFFER, <buffer id>); gl.glBindBuffer(GL.GL_ELEMENT_ARRAY_BUFFER, <buffer id>); gl.glDrawElements(GL.GL_POINTS, <size>, GL.GL_UNSIGNED_INT, 0); gl.glDisable(GL.GL_TEXTURE_2D); gl.glDisable(GL.GL_ALPHA_TEST); gl.glDisableVertexAttribArray(0); gl.glFlush(); Where the first buffer contains 12 million floats (the x,y,z coords of the 4 million textures) and the second (element) buffer contains 4 million integers. In this simple example it is simply the integers 0 through 3999999. I really want to know what is being done in software that is pegging my CPU, and how I can make it stop (if I can). My buffers are generated by the following code: gl.glBindBuffer(GL.GL_ARRAY_BUFFER, <buffer id>); gl.glBufferData(GL.GL_ARRAY_BUFFER, <size> * BufferUtil.SIZEOF_FLOAT, <buffer>, GL.GL_STATIC_DRAW); gl.glVertexAttribPointer(0, 3, GL.GL_FLOAT, false, 0, 0); and: gl.glBindBuffer(GL.GL_ELEMENT_ARRAY_BUFFER, <buffer id>); gl.glBufferData(GL.GL_ELEMENT_ARRAY_BUFFER, <size> * BufferUtil.SIZEOF_INT, <buffer>, GL.GL_STATIC_DRAW); ADDITIONAL INFO: Here is my initialization code: gl.setSwapInterval(1); //Also tried 0 gl.glShadeModel(GL.GL_SMOOTH); gl.glClearDepth(1.0f); gl.glEnable(GL.GL_DEPTH_TEST); gl.glDepthFunc(GL.GL_LESS); gl.glHint(GL.GL_PERSPECTIVE_CORRECTION_HINT, GL.GL_FASTEST); gl.glPointParameterfv(GL.GL_POINT_DISTANCE_ATTENUATION, POINT_DISTANCE_ATTENUATION, 0); gl.glPointParameterfv(GL.GL_POINT_SIZE_MIN, MIN_POINT_SIZE, 0); gl.glPointParameterfv(GL.GL_POINT_SIZE_MAX, MAX_POINT_SIZE, 0); gl.glPointSize(POINT_SIZE); gl.glTexEnvf(GL.GL_POINT_SPRITE, GL.GL_COORD_REPLACE, GL.GL_TRUE); gl.glEnable(GL.GL_POINT_SPRITE); gl.glClearColor(clearColor.getX(), clearColor.getY(), clearColor.getZ(), 0.0f); Also, I'm not sure if this helps or not, but when I drag the entire graph off the screen, the FPS shoots back up and the CPU usage falls to 0%. This seems obvious and intuitive to me, but I thought that might give a hint to someone else.

    Read the article

  • Setting effects variables in XNA

    - by Badescu Alexandru
    Hello ! I am currently reading a book named "3D Graphics with XNA Game Studio 4.0" by Sean James and have some questions to ask : If i create a effect parameter named lets say SpecularPower and have in my effect a variable named SpecularPower , if i do something like effect.Parameters["SpecularPower"].SetValue(3) That wil change the SpecularPower variable in my effect ? And a second question, not regarding the book : If i have a spaceship and i've created a "boost" functionality that speeds up my spaceship, what effects should i implement to create the impresion oh high speed ? I was thinking of making everything except my spaceship blurry but i think there would be something missing . Any ideas ? Regards, Alex Badescu

    Read the article

  • Weird y offset when using custom frag shader (Cocos2d-x)

    - by Mister Guacamole
    I'm trying to mask a sprite so I wrote a simple fragment shader that renders only the pixels that are not hidden under another texture (the mask). The problem is that it seems my texture has its y-coordinate offset after passing through the shader. This is the init method of the sprite (GroundZone) I want to mask: bool GroundZone::initWithSize(Size size) { // [...] // Setup the mask of the sprite m_mask = RenderTexture::create(textureWidth, textureHeight); m_mask->retain(); m_mask->setKeepMatrix(true); Texture2D *maskTexture = m_mask->getSprite()->getTexture(); maskTexture->setAliasTexParameters(); // Disable linear interpolation on the mask // Load the custom frag shader with a default vert shader as the sprite’s program FileUtils *fileUtils = FileUtils::getInstance(); string vertexSource = ccPositionTextureA8Color_vert; string fragmentSource = fileUtils->getStringFromFile( fileUtils->fullPathForFilename("CustomShader_AlphaMask_frag.fsh")); GLProgram *shader = new GLProgram; shader->initWithByteArrays(vertexSource.c_str(), fragmentSource.c_str()); shader->bindAttribLocation(GLProgram::ATTRIBUTE_NAME_POSITION, GLProgram::VERTEX_ATTRIB_POSITION); shader->bindAttribLocation(GLProgram::ATTRIBUTE_NAME_TEX_COORD, GLProgram::VERTEX_ATTRIB_TEX_COORDS); shader->link(); CHECK_GL_ERROR_DEBUG(); shader->updateUniforms(); CHECK_GL_ERROR_DEBUG(); int maskTexUniformLoc = shader->getUniformLocationForName("u_alphaMaskTexture"); shader->setUniformLocationWith1i(maskTexUniformLoc, 1); this->setShaderProgram(shader); shader->release(); // [...] } These are the custom drawing methods for actually drawing the mask over the sprite: You need to know that m_mask is modified externally by another class, the onDraw() method only render it. void GroundZone::draw(Renderer *renderer, const kmMat4 &transform, bool transformUpdated) { m_renderCommand.init(_globalZOrder); m_renderCommand.func = CC_CALLBACK_0(GroundZone::onDraw, this, transform, transformUpdated); renderer->addCommand(&m_renderCommand); Sprite::draw(renderer, transform, transformUpdated); } void GroundZone::onDraw(const kmMat4 &transform, bool transformUpdated) { GLProgram *shader = this->getShaderProgram(); shader->use(); glActiveTexture(GL_TEXTURE1); glBindTexture(GL_TEXTURE_2D, m_mask->getSprite()->getTexture()->getName()); glActiveTexture(GL_TEXTURE0); } Below is the method (located in another class, GroundLayer) that modify the mask by drawing a line from point start to point end. Both points are in Cocos2d coordinates (Point (0,0) is down-left). void GroundLayer::drawTunnel(Point start, Point end) { // To dig a line, we need first to get the texture of the zone we will be digging into. Then we get the // relative position of the start and end point in the zone's node space. Finally we use the custom shader to // draw a mask over the existing texture. for (auto it = _children.begin(); it != _children.end(); it++) { GroundZone *zone = static_cast<GroundZone *>(*it); Point nodeStart = zone->convertToNodeSpace(start); Point nodeEnd = zone->convertToNodeSpace(end); // Now that we have our two points converted to node space, it's easy to draw a mask that contains a line // going from the start point to the end point and that is then applied over the current texture. Size groundZoneSize = zone->getContentSize(); RenderTexture *rt = zone->getMask(); rt->begin(); { // Draw a line going from start and going to end in the texture, the line will act as a mask over the // existing texture DrawNode *line = DrawNode::create(); line->retain(); line->drawSegment(nodeStart, nodeEnd, 20, Color4F::RED); line->visit(); } rt->end(); } } Finally, here's the custom shader I wrote. #ifdef GL_ES precision mediump float; #endif varying vec2 v_texCoord; uniform sampler2D u_texture; uniform sampler2D u_alphaMaskTexture; void main() { float maskAlpha = texture2D(u_alphaMaskTexture, v_texCoord).a; float texAlpha = texture2D(u_texture, v_texCoord).a; float blendAlpha = (1.0 - maskAlpha) * texAlpha; // Show only where mask is invisible vec3 texColor = texture2D(u_texture, v_texCoord).rgb; gl_FragColor = vec4(texColor, blendAlpha); return; } I got a problem with the y coordinates. Indeed, it seems that once it has passed through my custom shader, the sprite's texture is not at the right place: Without custom shader (the sprite is the brown thing): With custom shader: What's going on here? Thanks :) EDIT It looks like after passing through the shader when I set the position of the sprite I set it in points, with (0,0) being in the top-right. Indeed, when I do sprite->setPosition(320, 480), the sprite is perfectly placed at the top of the screen.

    Read the article

  • Out of Memory when building an application

    - by Jacob Neal
    I have quite a major problem with my Multimedia Fusion 2 game. I finished it months ago, however, the only thing keeping me from finally compiling the game into an executable file is this error message that pops up every time I try to, simply saying, "Out of Memory". Its highly frustrating to be halted at this point by this message, and I tried everything I could come up with to fix it including compressing the runtime and sounds and increasing the proity of MMF2 all the way to realtime in the task manager. Im begging someone to toss me a bone on this problem, and any advice at all would be much appreciated.

    Read the article

  • How can I compile SM 3.0 effects in D3D11 in slimdx?

    - by jacker
    var bytecode = ShaderBytecode.CompileFromFile("shaders\\testShader.fx", "fx_5_0", ShaderFlags.None, SlimDX.D3DCompiler.EffectFlags.None, null, null, out str); var effect = new SlimDX.Direct3D11.Effect(gpu.Device, bytecode); Works fine but if I try to use another shader model like 4.0 or 3.0 it throws an error on the new effect creation: E_FAIL: An undetermined error occurred (-2147467259) How do I compile older shaders? And I've read about device context but I can't find any information on how to use them to maintain DX9 compatibility.

    Read the article

  • Can I use GLFW and GLEW together in the same code

    - by Brendan Webster
    I use the g++ compiler, which could be causing the main problem, but I'm using GLFW for window and input management, and I am using GLEW so that I can use OpenGL 3.x functionality. I loaded in models and then tried to make Vertex and Index buffers for the data, but it turned out that I kept getting segmentation faults in the program. I finally figured out that GLEW just wasn't working with GLFW included. Do they not work together? Also I've done the context creation through GLFW so that may be another factor in the problem.

    Read the article

  • Calculate the Intersection of Two Volumes

    - by igrad
    If you've ever played The Swapper, you'll have a good idea of what I'm asking about. I need to check for, and isolate, areas of a rectangle that may intersect with either a circle or another rectangle. These selected areas will receive special properties, and the areas will be non-static, since the intersecting shapes themselves will also be dynamic. My first thought was to use raycasting detection, though I've only seen that in use with circles, or even ellipses. I'm curious if there's a method of using raycasting with a more rectangular approach, or if there's a totally different method already in use to accomplish this task. I would like something more exact than checking in large chunks, and since I'm using SDL2 with a logical renderer size of 1920x1080, checking if each pixel is intersecting is out of the question, as it would slow things down past a playable speed. I already have a multi-shape collision function-template in place, and I could use that, though it only checks if sides or corners are intersecting; it does not compute the overlapping area, or even find the circle's secant line, though I can't imagine it would be overly complex to implement. TL;DR: I need to find and isolate areas of a rectangle that may intersect with a circle or another rectangle without checking every single pixel on-screen.

    Read the article

  • How does this game loop actually work?

    - by Nicolai
    I read this playfulJS post, about ray-casting: http://www.playfuljs.com/a-first-person-engine-in-265-lines/ It looks really interested, so I decided to look at his javascript. I am no expert in javascript, so I quickly got lost. It's the game loop "object" that really gets me. I simply don't understand how it works. From the code: function GameLoop() { this.frame = this.frame.bind(this); this.lastTime = 0; this.callback = function() {}; } GameLoop.prototype.start = function(callback) { this.callback = callback; requestAnimationFrame(this.frame); }; GameLoop.prototype.frame = function(time) { var seconds = (time - this.lastTime) / 1000; this.lastTime = time; if (seconds < 0.2) this.callback(seconds); requestAnimationFrame(this.frame); }; var loop = new GameLoop(); loop.start(function frame(seconds) { map.update(seconds); player.update(controls.states, map, seconds); camera.render(player, map); }); Now, what really confuses me here, is this bind stuff and how this actually loops. I am guessing, that if less than 0.2 seconds have passed, since the last time the loop was run, it simply goes back to re-check the time. If more than 0.2 seconds have passed, it leaves the frame function, and executes the 3 lines in the loop. But, if this is true, then how does the loop.start() get called again? And what on earth is the meaning of this.frame = this.frame.bind(this);? I've looked up prototypes bind() but I really don't understand it.

    Read the article

  • Blender multiple animations and Collada export

    - by Morgan Bengtsson
    Say I have a simple mesh in Blender, with two keyframes, like so: Then, another animation for the same mesh, also with two keyframes: Theese animations worke fine in Blender and I can switch between them in the Dopesheet, where they are called "actions": The problem arises, when i try to export this to the Collada format, for use in my game engine. The only animation/action that seems to be carried over, is the one currently associated to the mesh. Is it possible to export multiple animations/actions for the same mesh, to the Collada format?

    Read the article

  • C# XNA: Effecient mesh building algorithm for voxel based terrain ("top" outside layer only, non-destructible)

    - by Tim Hatch
    To put this bluntly, for non-destructible/non-constructible voxel style terrain, are generated meshes handled much better than instancing? Is there another method to achieve millions of visible quad faces per scene with ease? If generated meshes per chunk is the way to go, what kind of algorithm might I want to use based on only EVER needing the outer layer rendered? I'm using 3D Perlin Noise for terrain generation (for overhangs/caves/etc). The layout is fantastic, but even for around 20k visible faces, it's quite slow using instancing (whether it's one big draw call or multiple smaller chunks). I've simplified it to the point of removing non-visible cubes and only having the top faces of my cube-like terrain be rendered, but with 20k quad instances, it's still pretty sluggish (30fps on my machine). My goal is for the world to be made using quite small cubes. Where multiple games (IE: Minecraft) have the player 1x1 cube in width/length and 2 high, I'm shooting for 6x6 width/length and 9 high. With a lot of advantages as far as gameplay goes, it also means I could quite easily have a single scene with millions of truly visible quads. So, I have been trying to look into changing my method from instancing to mesh generation on a chunk by chunk basis. Do video cards handle this type of processing better than separate quads/cubes through instancing? What kind of existing algorithms should I be looking into? I've seen references to marching cubes a few times now, but I haven't spent much time investigating it since I don't know if it's the better route for my situation or not. I'm also starting to doubt my need of using 3D Perlin noise for terrain generation since I won't want the kind of depth it would seem best at. I just like the idea of overhangs and occasional cave-like structures, but could find no better 'surface only' algorithms to cover that. If anyone has any better suggestions there, feel free to throw them at me too. Thanks, Mythics

    Read the article

  • Sprite sheets, Clamp or Wrap?

    - by David
    I'm using a combination of sprite sheets for well, sprites and individual textures for infinite tiling. For the tiling textures I'm obviously using Wrap to draw the entire surface in one call but up until now I've been making a seperate batch using Clamp for drawing sprites from the sprite sheets. The sprite sheets include a border (repeating the edge pixels of each sprite) and my code uses the correct source coordinates for sprites. But since I'm never giving coordinates outside of the texture when drawing sprites (and indeed the border exists to prevent bleed over when filtering) it's struck me that I'd be better off just using Wrap so that I can combine everything into one batch. I just want to be sure that I haven't overlooked something obvious. Is there any reason that Wrap would be harmful when used with a sprite sheet?

    Read the article

  • Network Multiplayer in Flash

    - by shadowprotocol
    Flash has come a long way in the last decade, and it's a well-kept secret getting a flash game to connect to a multi-client server for chat and/or basic avatar movement in real time. Why has the industry as a whole not made this a common-knowledge type of thing yet? We keep pushing to the web but I am finding it incredibly difficult gathering learning material on this subject. Sure, I can find multi-client server socket tutorials in various languages (using select statements and/or threads to handle multiple socket connections), but in regards to Flash applications inside of a browser? NOPE! Can everyone please share what they know? :] It's a subject I'd really love to get into but I'm afraid I just honestly don't know enough about how to do it. Thanks!

    Read the article

  • Off center projection

    - by N0xus
    I'm trying to implement the code that was freely given by a very kind developer at the following link: http://forum.unity3d.com/threads/142383-Code-sample-Off-Center-Projection-Code-for-VR-CAVE-or-just-for-fun Right now, all I'm trying to do is bring it in on one camera, but I have a few issues. My class, looks as follows: using UnityEngine; using System.Collections; public class PerspectiveOffCenter : MonoBehaviour { // Use this for initialization void Start () { } // Update is called once per frame void Update () { } public static Matrix4x4 GeneralizedPerspectiveProjection(Vector3 pa, Vector3 pb, Vector3 pc, Vector3 pe, float near, float far) { Vector3 va, vb, vc; Vector3 vr, vu, vn; float left, right, bottom, top, eyedistance; Matrix4x4 transformMatrix; Matrix4x4 projectionM; Matrix4x4 eyeTranslateM; Matrix4x4 finalProjection; ///Calculate the orthonormal for the screen (the screen coordinate system vr = pb - pa; vr.Normalize(); vu = pc - pa; vu.Normalize(); vn = Vector3.Cross(vr, vu); vn.Normalize(); //Calculate the vector from eye (pe) to screen corners (pa, pb, pc) va = pa-pe; vb = pb-pe; vc = pc-pe; //Get the distance;; from the eye to the screen plane eyedistance = -(Vector3.Dot(va, vn)); //Get the varaibles for the off center projection left = (Vector3.Dot(vr, va)*near)/eyedistance; right = (Vector3.Dot(vr, vb)*near)/eyedistance; bottom = (Vector3.Dot(vu, va)*near)/eyedistance; top = (Vector3.Dot(vu, vc)*near)/eyedistance; //Get this projection projectionM = PerspectiveOffCenter(left, right, bottom, top, near, far); //Fill in the transform matrix transformMatrix = new Matrix4x4(); transformMatrix[0, 0] = vr.x; transformMatrix[0, 1] = vr.y; transformMatrix[0, 2] = vr.z; transformMatrix[0, 3] = 0; transformMatrix[1, 0] = vu.x; transformMatrix[1, 1] = vu.y; transformMatrix[1, 2] = vu.z; transformMatrix[1, 3] = 0; transformMatrix[2, 0] = vn.x; transformMatrix[2, 1] = vn.y; transformMatrix[2, 2] = vn.z; transformMatrix[2, 3] = 0; transformMatrix[3, 0] = 0; transformMatrix[3, 1] = 0; transformMatrix[3, 2] = 0; transformMatrix[3, 3] = 1; //Now for the eye transform eyeTranslateM = new Matrix4x4(); eyeTranslateM[0, 0] = 1; eyeTranslateM[0, 1] = 0; eyeTranslateM[0, 2] = 0; eyeTranslateM[0, 3] = -pe.x; eyeTranslateM[1, 0] = 0; eyeTranslateM[1, 1] = 1; eyeTranslateM[1, 2] = 0; eyeTranslateM[1, 3] = -pe.y; eyeTranslateM[2, 0] = 0; eyeTranslateM[2, 1] = 0; eyeTranslateM[2, 2] = 1; eyeTranslateM[2, 3] = -pe.z; eyeTranslateM[3, 0] = 0; eyeTranslateM[3, 1] = 0; eyeTranslateM[3, 2] = 0; eyeTranslateM[3, 3] = 1f; //Multiply all together finalProjection = new Matrix4x4(); finalProjection = Matrix4x4.identity * projectionM*transformMatrix*eyeTranslateM; //finally return return finalProjection; } // Update is called once per frame public void FixedUpdate () { Camera cam = camera; //calculate projection Matrix4x4 genProjection = GeneralizedPerspectiveProjection( new Vector3(0,1,0), new Vector3(1,1,0), new Vector3(0,0,0), new Vector3(0,0,0), cam.nearClipPlane, cam.farClipPlane); //(BottomLeftCorner, BottomRightCorner, TopLeftCorner, trackerPosition, cam.nearClipPlane, cam.farClipPlane); cam.projectionMatrix = genProjection; } } My error lies in projectionM = PerspectiveOffCenter(left, right, bottom, top, near, far); The debugger states: Expression denotes a `type', where a 'variable', 'value' or 'method group' was expected. Thus, I changed the line to read: projectionM = new PerspectiveOffCenter(left, right, bottom, top, near, far); But then the error is changed to: The type 'PerspectiveOffCenter' does not contain a constructor that takes '6' arguments. For reasons that are obvious. So, finally, I changed the line to read: projectionM = new GeneralizedPerspectiveProjection(left, right, bottom, top, near, far); And the error I get is: is a 'method' but a 'type' was expected. With this last error, I'm not sure what it is I should do / missing. Can anyone see what it is that I'm missing to fix this error?

    Read the article

  • Vertex buffer acting strange? [on hold]

    - by Ryan Capote
    I'm having a strange problem, and I don't know what could be causing it. My current code is identical to how I've done this before. I'm trying to render a rectangle using VBO and orthographic projection.   My results:     What I expect: 3x3 rectangle in the top left corner   #include <stdio.h> #include <GL\glew.h> #include <GLFW\glfw3.h> #include "lodepng.h"   static const int FALSE = 0; static const int TRUE = 1;   static const char* VERT_SHADER =     "#version 330\n"       "layout(location=0) in vec4 VertexPosition; "     "layout(location=1) in vec2 UV;"     "uniform mat4 uProjectionMatrix;"     /*"out vec2 TexCoords;"*/       "void main(void) {"     "    gl_Position = uProjectionMatrix*VertexPosition;"     /*"    TexCoords = UV;"*/     "}";   static const char* FRAG_SHADER =     "#version 330\n"       /*"uniform sampler2D uDiffuseTexture;"     "uniform vec4 uColor;"     "in vec2 TexCoords;"*/     "out vec4 FragColor;"       "void main(void) {"    /* "    vec4 texel = texture2D(uDiffuseTexture, TexCoords);"     "    if(texel.a <= 0) {"     "         discard;"     "    }"     "    FragColor = texel;"*/     "    FragColor = vec4(1.f);"     "}";   static int g_running; static GLFWwindow *gl_window; static float gl_projectionMatrix[16];   /*     Structures */ typedef struct _Vertex {     float x, y, z, w;     float u, v; } Vertex;   typedef struct _Position {     float x, y; } Position;   typedef struct _Bitmap {     unsigned char *pixels;     unsigned int width, height; } Bitmap;   typedef struct _Texture {     GLuint id;     unsigned int width, height; } Texture;   typedef struct _VertexBuffer {     GLuint bufferObj, vertexArray; } VertexBuffer;   typedef struct _ShaderProgram {     GLuint vertexShader, fragmentShader, program; } ShaderProgram;   /*   http://en.wikipedia.org/wiki/Orthographic_projection */ void createOrthoProjection(float *projection, float width, float height, float far, float near)  {       const float left = 0;     const float right = width;     const float top = 0;     const float bottom = height;          projection[0] = 2.f / (right - left);     projection[1] = 0.f;     projection[2] = 0.f;     projection[3] = -(right+left) / (right-left);     projection[4] = 0.f;     projection[5] = 2.f / (top - bottom);     projection[6] = 0.f;     projection[7] = -(top + bottom) / (top - bottom);     projection[8] = 0.f;     projection[9] = 0.f;     projection[10] = -2.f / (far-near);     projection[11] = (far+near)/(far-near);     projection[12] = 0.f;     projection[13] = 0.f;     projection[14] = 0.f;     projection[15] = 1.f; }   /*     Textures */ void loadBitmap(const char *filename, Bitmap *bitmap, int *success) {     int error = lodepng_decode32_file(&bitmap->pixels, &bitmap->width, &bitmap->height, filename);       if (error != 0) {         printf("Failed to load bitmap. ");         printf(lodepng_error_text(error));         success = FALSE;         return;     } }   void destroyBitmap(Bitmap *bitmap) {     free(bitmap->pixels); }   void createTexture(Texture *texture, const Bitmap *bitmap) {     texture->id = 0;     glGenTextures(1, &texture->id);     glBindTexture(GL_TEXTURE_2D, texture);       glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT);     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT);       glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, bitmap->width, bitmap->height, 0,              GL_RGBA, GL_UNSIGNED_BYTE, bitmap->pixels);       glBindTexture(GL_TEXTURE_2D, 0); }   void destroyTexture(Texture *texture) {     glDeleteTextures(1, &texture->id);     texture->id = 0; }   /*     Vertex Buffer */ void createVertexBuffer(VertexBuffer *vertexBuffer, Vertex *vertices) {     glGenBuffers(1, &vertexBuffer->bufferObj);     glGenVertexArrays(1, &vertexBuffer->vertexArray);     glBindVertexArray(vertexBuffer->vertexArray);       glBindBuffer(GL_ARRAY_BUFFER, vertexBuffer->bufferObj);     glBufferData(GL_ARRAY_BUFFER, sizeof(Vertex) * 6, (const GLvoid*)vertices, GL_STATIC_DRAW);       const unsigned int uvOffset = sizeof(float) * 4;       glVertexAttribPointer(0, 4, GL_FLOAT, GL_FALSE, sizeof(Vertex), 0);     glVertexAttribPointer(1, 2, GL_FLOAT, GL_FALSE, sizeof(Vertex), (GLvoid*)uvOffset);       glEnableVertexAttribArray(0);     glEnableVertexAttribArray(1);       glBindBuffer(GL_ARRAY_BUFFER, 0);     glBindVertexArray(0); }   void destroyVertexBuffer(VertexBuffer *vertexBuffer) {     glDeleteBuffers(1, &vertexBuffer->bufferObj);     glDeleteVertexArrays(1, &vertexBuffer->vertexArray); }   void bindVertexBuffer(VertexBuffer *vertexBuffer) {     glBindVertexArray(vertexBuffer->vertexArray);     glBindBuffer(GL_ARRAY_BUFFER, vertexBuffer->bufferObj); }   void drawVertexBufferMode(GLenum mode) {     glDrawArrays(mode, 0, 6); }   void drawVertexBuffer() {     drawVertexBufferMode(GL_TRIANGLES); }   void unbindVertexBuffer() {     glBindVertexArray(0);     glBindBuffer(GL_ARRAY_BUFFER, 0); }   /*     Shaders */ void compileShader(ShaderProgram *shaderProgram, const char *vertexSrc, const char *fragSrc) {     GLenum err;     shaderProgram->vertexShader = glCreateShader(GL_VERTEX_SHADER);     shaderProgram->fragmentShader = glCreateShader(GL_FRAGMENT_SHADER);       if (shaderProgram->vertexShader == 0) {         printf("Failed to create vertex shader.");         return;     }       if (shaderProgram->fragmentShader == 0) {         printf("Failed to create fragment shader.");         return;     }       glShaderSource(shaderProgram->vertexShader, 1, &vertexSrc, NULL);     glCompileShader(shaderProgram->vertexShader);     glGetShaderiv(shaderProgram->vertexShader, GL_COMPILE_STATUS, &err);       if (err != GL_TRUE) {         printf("Failed to compile vertex shader.");         return;     }       glShaderSource(shaderProgram->fragmentShader, 1, &fragSrc, NULL);     glCompileShader(shaderProgram->fragmentShader);     glGetShaderiv(shaderProgram->fragmentShader, GL_COMPILE_STATUS, &err);       if (err != GL_TRUE) {         printf("Failed to compile fragment shader.");         return;     }       shaderProgram->program = glCreateProgram();     glAttachShader(shaderProgram->program, shaderProgram->vertexShader);     glAttachShader(shaderProgram->program, shaderProgram->fragmentShader);     glLinkProgram(shaderProgram->program);          glGetProgramiv(shaderProgram->program, GL_LINK_STATUS, &err);       if (err != GL_TRUE) {         printf("Failed to link shader.");         return;     } }   void destroyShader(ShaderProgram *shaderProgram) {     glDetachShader(shaderProgram->program, shaderProgram->vertexShader);     glDetachShader(shaderProgram->program, shaderProgram->fragmentShader);       glDeleteShader(shaderProgram->vertexShader);     glDeleteShader(shaderProgram->fragmentShader);       glDeleteProgram(shaderProgram->program); }   GLuint getUniformLocation(const char *name, ShaderProgram *program) {     GLuint result = 0;     result = glGetUniformLocation(program->program, name);       return result; }   void setUniformMatrix(float *matrix, const char *name, ShaderProgram *program) {     GLuint loc = getUniformLocation(name, program);       if (loc == -1) {         printf("Failed to get uniform location in setUniformMatrix.\n");         return;     }       glUniformMatrix4fv(loc, 1, GL_FALSE, matrix); }   /*     General functions */ static int isRunning() {     return g_running && !glfwWindowShouldClose(gl_window); }   static void initializeGLFW(GLFWwindow **window, int width, int height, int *success) {     if (!glfwInit()) {         printf("Failed it inialize GLFW.");         *success = FALSE;        return;     }          glfwWindowHint(GLFW_RESIZABLE, 0);     *window = glfwCreateWindow(width, height, "Alignments", NULL, NULL);          if (!*window) {         printf("Failed to create window.");         glfwTerminate();         *success = FALSE;         return;     }          glfwMakeContextCurrent(*window);       GLenum glewErr = glewInit();     if (glewErr != GLEW_OK) {         printf("Failed to initialize GLEW.");         printf(glewGetErrorString(glewErr));         *success = FALSE;         return;     }       glClearColor(0.f, 0.f, 0.f, 1.f);     glViewport(0, 0, width, height);     *success = TRUE; }   int main(int argc, char **argv) {          int err = FALSE;     initializeGLFW(&gl_window, 480, 320, &err);     glDisable(GL_DEPTH_TEST);     if (err == FALSE) {         return 1;     }          createOrthoProjection(gl_projectionMatrix, 480.f, 320.f, 0.f, 1.f);          g_running = TRUE;          ShaderProgram shader;     compileShader(&shader, VERT_SHADER, FRAG_SHADER);     glUseProgram(shader.program);     setUniformMatrix(&gl_projectionMatrix, "uProjectionMatrix", &shader);       Vertex rectangle[6];     VertexBuffer vbo;     rectangle[0] = (Vertex){0.f, 0.f, 0.f, 1.f, 0.f, 0.f}; // Top left     rectangle[1] = (Vertex){3.f, 0.f, 0.f, 1.f, 1.f, 0.f}; // Top right     rectangle[2] = (Vertex){0.f, 3.f, 0.f, 1.f, 0.f, 1.f}; // Bottom left     rectangle[3] = (Vertex){3.f, 0.f, 0.f, 1.f, 1.f, 0.f}; // Top left     rectangle[4] = (Vertex){0.f, 3.f, 0.f, 1.f, 0.f, 1.f}; // Bottom left     rectangle[5] = (Vertex){3.f, 3.f, 0.f, 1.f, 1.f, 1.f}; // Bottom right       createVertexBuffer(&vbo, &rectangle);            bindVertexBuffer(&vbo);          while (isRunning()) {         glClear(GL_COLOR_BUFFER_BIT);         glfwPollEvents();                    drawVertexBuffer();                    glfwSwapBuffers(gl_window);     }          unbindVertexBuffer(&vbo);       glUseProgram(0);     destroyShader(&shader);     destroyVertexBuffer(&vbo);     glfwTerminate();     return 0; }

    Read the article

  • Camera wont stay behind model after pitch, then rotation

    - by ChocoMan
    I have a camera position behind a model. Currently, if I push the left thumbstick making my model move forward, backward, or strafe, the camera stays with the model. If I push the right thumbstick left or right, the model rotates in those directions fine along with the camera rotating while maintaining its position relatively behind the model. But when I pitch the model up or down, then rotate the model afterwards, the camera moves slightly rotates in a clock-like fashion behind the model. If I do a few rotations of the model and try to pitch the camera, the camera will eventually be looking at the side, then eventually the front of the model while also rotating in a clock-like fashion. My question is, how do I keep the camera to pitch up and down behind the model no matter how much the model has rotated? Here is what I got: // Rotates model and pitches camera on its own axis public void modelRotMovement(GamePadState pController) { // Rotates Camera with model Yaw = pController.ThumbSticks.Right.X * MathHelper.ToRadians(angularSpeed); // Pitches Camera around model Pitch = pController.ThumbSticks.Right.Y * MathHelper.ToRadians(angularSpeed); AddRotation = Quaternion.CreateFromYawPitchRoll(Yaw, 0, 0); ModelLoad.MRotation *= AddRotation; MOrientation = Matrix.CreateFromQuaternion(ModelLoad.MRotation); } // Orbit (yaw) Camera around with model (only seeing back of model) public void cameraYaw(Vector3 axisYaw, float yaw) { ModelLoad.CameraPos = Vector3.Transform(ModelLoad.CameraPos - ModelLoad.camTarget, Matrix.CreateFromAxisAngle(axisYaw, yaw)) + ModelLoad.camTarget; } // Raise camera above or below model's shoulders public void cameraPitch(Vector3 axisPitch, float pitch) { ModelLoad.CameraPos = Vector3.Transform(ModelLoad.CameraPos - ModelLoad.camTarget, Matrix.CreateFromAxisAngle(axisPitch, pitch)) + ModelLoad.camTarget; } // Call in update method public void updateCamera() { cameraYaw(Vector3.Up, Yaw); cameraPitch(Vector3.Right, Pitch); } NOTE: I tried to use addPitch just like addRotation but it didn't work...

    Read the article

  • Extract derived 3D scaling from a 3D Sprite to set to a 2D billboard

    - by Bill Kotsias
    I am trying to get the derived position and scaling of a 3D Sprite and set them to a 2D Sprite. I have managed to do the first part like this: var p:Point = sprite3d.local3DToGlobal(new Vector3D(0,0,0)); billboard.x = p.x; billboard.y = p.y; But I can't get the scaling part correctly. I am trying this: var mat:Matrix3D = sprite3d.transform.getRelativeMatrix3D(stage); // get derived matrix(?) var scaleV:Vector3D = mat.decompose()[2]; // get scaling vector from derived matrix var scale:Number = scaleV.length; billboard.scaleX = scale; billboard.scaleY = scale; ...but the result is apparently wrong. PS. One might ask what I am trying to achieve. I am trying to create "billboard" 3D sprites, i.e. sprites which are affected by all 3D transformations except rotations, thus they always face the "camera".

    Read the article

  • Stencyl or flash limitation?

    - by FlightOfGrey
    I have found that Stencyl doesn't seem to be very good at handling very many actors in a game. I had been trying to implement some basic AI at the moment all the behaviours were: wander (pick a random point and move directly to it) and wrap around screen (if it goes off the top of the screen it appears at the bottom). Even with these simple behaviours and calculations the frame rate dropped dramatically when there were more then 50 actors on screen: 10 actors: 60fps 50 actors: 30-50fps 75 actors: ~30fps 100 actors: 15-20fps 200 actors: 8-10fps I had planned on having a maximum of around 200 actors but I see that's no longer an option and implementing a more complicated AI system with flocking behaviour, looking at creating a game in a similar vein to flOw. I understand that a game is perfectly playable at 30fps but this is a super simple test with ultra simple graphics, no animations and no sounds is child's play in terms of calculations to be made. Is this a limitation with Stencyl or is it flash? Should I simply scale the scope of the game down or is there a better game engine that exports to .swf that I should look into?

    Read the article

  • Best way to Draw a cube for 3D Picking on a specific face

    - by Kenneth Bray
    Currently I am drawing a cube for a game that I am making and the cube draw method is below. My question is, what is the best way to draw a cube and to be able to easily find the face that the cursor is over? My draw method works just fine, but I am getting ready to start to add picking (this will be used to mold the cubes into other shaps), and would like to know the best way to find a face of the cube. public void Draw() { // center point posX, posY, posZ float radius = size / 2; //top glPushMatrix(); glBegin(GL_QUADS); { glColor3f(1.0f,0.0f,0.0f); // red glVertex3f(posX + radius, posY + radius, posZ - radius); glVertex3f(posX - radius, posY + radius, posZ - radius); glVertex3f(posX - radius, posY + radius, posZ + radius); glVertex3f(posX + radius, posY + radius, posZ + radius); } glEnd(); glPopMatrix(); //bottom glPushMatrix(); glBegin(GL_QUADS); { glColor3f(1.0f,1.0f,0.0f); // ?? color glVertex3f(posX + radius, posY - radius, posZ + radius); glVertex3f(posX - radius, posY - radius, posZ + radius); glVertex3f(posX - radius, posY - radius, posZ - radius); glVertex3f(posX + radius, posY - radius, posZ - radius); } glEnd(); glPopMatrix(); //right side glPushMatrix(); glBegin(GL_QUADS); { glColor3f(1.0f,0.0f,1.0f); // ?? color glVertex3f(posX + radius, posY + radius, posZ + radius); glVertex3f(posX + radius, posY - radius, posZ + radius); glVertex3f(posX + radius, posY - radius, posZ - radius); glVertex3f(posX + radius, posY + radius, posZ - radius); } glEnd(); glPopMatrix(); //left side glPushMatrix(); glBegin(GL_QUADS); { glColor3f(0.0f,1.0f,1.0f); // ?? color glVertex3f(posX - radius, posY + radius, posZ - radius); glVertex3f(posX - radius, posY - radius, posZ - radius); glVertex3f(posX - radius, posY - radius, posZ + radius); glVertex3f(posX - radius, posY + radius, posZ + radius); } glEnd(); glPopMatrix(); //front side glPushMatrix(); glBegin(GL_QUADS); { glColor3f(0.0f,0.0f,1.0f); // blue glVertex3f(posX + radius, posY + radius, posZ + radius); glVertex3f(posX - radius, posY + radius, posZ + radius); glVertex3f(posX - radius, posY - radius, posZ + radius); glVertex3f(posX + radius, posY - radius, posZ + radius); } glEnd(); glPopMatrix(); //back side glPushMatrix(); glBegin(GL_QUADS); { glColor3f(0.0f,1.0f,0.0f); // green glVertex3f(posX + radius, posY - radius, posZ - radius); glVertex3f(posX - radius, posY - radius, posZ - radius); glVertex3f(posX - radius, posY + radius, posZ - radius); glVertex3f(posX + radius, posY + radius, posZ - radius); } glEnd(); glPopMatrix(); }

    Read the article

  • XNA 4.0: Problem with loading XML content files

    - by 200
    I'm new to XNA so hopefully my question isn't too silly. I'm trying to load content data from XML. My XML file is placed in my Content project (the new XNA 4 thing), called "Event1.xml": <?xml version="1.0" encoding="utf-8" ?> <XnaContent> <Asset Type="MyNamespace.Event"> // error on this line <name>1</name> </Asset> </XnaContent> My "Event" class is placed in my main project: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Xml.Linq; namespace MyNamespace { public class Event { public string name; } } The XML file is being called by my main game class inside the LoadContent() method: Event temp = Content.Load<Event>("Event1"); And this is the error I'm getting: There was an error while deserializing intermediate XML. Cannot find type "MyNamespace.Event" I think the problem is because at the time the XML is being evaluated, the Event class has not been established because one file is in my main project while the other is in my Content project (being a XNA 4.0 project and such). I have also tried changing the build action of the xml file from compile to content; however the program would then not be able to find the file and would give this other warning: Project item 'Event1.xml' was not built with the XNA Framework Content Pipeline. Set its Build Action property to Compile to build it. Any suggestions are appreciated. Thanks.

    Read the article

  • Optimizing graphics for an iOS flash game

    - by 1GR3
    A friend of mine and myself are working on a flash developed iOS (and later Android) puzzle board game. He's a developer and I'm a designer/developer so (no surprise) we have different points of view. His method: make small tiles (100x100px) in Photoshop join them into the board and then in flash apply effects to the board to avoid repetition (80's not in the good way). My method: precompose the whole board (960x640px+bleed) in Photoshop and than mask active and inactive areas in flash. What do you think?

    Read the article

  • How to raycast select a scaled OBB?

    - by user3254944
    I have the OBB picking code to select an OBB with code inspired from Real time Rendering 3 and opengl-tutorial.org. I can successfully select objects that have been moved or rotated. However, I cant correctly select an object that has been scaled. The bounding box scales right, but the I can only select the object in a thin strip on its center. How do I fix the checkForHits() function to allow it to read the scaling that I passed to it in the raycast matrix? void GLWidget::selectObjRaycast() { glm::vec2 mouse = (glm::vec2(mousePos.x(), mousePos.y()) / glm::vec2(this->width(), this->height())) * 2.0f - 1.0f; mouse.y *= -1; glm::mat4 toWorld = glm::inverse(ProjectionM * ViewM); glm::vec4 from = toWorld * glm::vec4(mouse, -1.0f, 1.0f); glm::vec4 to = toWorld * glm::vec4(mouse, 1.0f, 1.0f); from /= from.w; to /= to.w; fromAABB = glm::vec3(from); toAABB = glm::normalize(glm::vec3(to - from)); checkForHits(); } void GLWidget::checkForHits() { for (int i = 0; i < myWin.myEtc->allObj.size(); ++i) //check for hits on each obj's bb { bool miss = 0; float tMin = 0.0f; float tMax = 100000.0f; glm::vec3 bbPos(myWin.myEtc->allObj[i]->raycastM[3].x, myWin.myEtc->allObj[i]->raycastM[3].y, myWin.myEtc->allObj[i]->raycastM[3].z); glm::vec3 delta = bbPos - fromAABB; for (int j = 0; j < 3; ++j) { glm::vec3 axis(myWin.myEtc->allObj[i]->raycastM[j].x, myWin.myEtc->allObj[i]->raycastM[j].y, myWin.myEtc->allObj[i]->raycastM[j].z); float e = glm::dot(axis, delta); float f = glm::dot(toAABB, axis); if (fabs(f) > 0.001f) { float t1 = (e + myWin.myEtc->allObj[i]->bbMin[j]) / f; float t2 = (e + myWin.myEtc->allObj[i]->bbMax[j]) / f; if (t1 > t2) { float w = t1; t1 = t2; t2 = w; } if (t2 < tMax) tMax = t2; if (t1 > tMin) tMin = t1; if (tMax < tMin) miss = 1; } else { if (-e + myWin.myEtc->allObj[i]->bbMin[j] > 0.0f || -e + myWin.myEtc->allObj[i]->bbMax[j] < 0.0f) miss = 1; } } if (miss == 0) { intersection_distance = tMin; myWin.myEtc->sel.push_back(myWin.myEtc->allObj[i]); myWin.myEtc->allObj[i]->highlight = myWin.myGLHelp->highlight; break; } } } void Object::render(glm::mat4 PV) { scaleM = glm::scale(glm::mat4(), s->val_3); r_quat = glm::quat(glm::radians(r->val_3)); rotationM = glm::toMat4(r_quat); translationM = glm::translate(glm::mat4(), t->val_3); transLocal1M = glm::translate(glm::mat4(), -rsPivot->val_3); transLocal2M = glm::translate(glm::mat4(), rsPivot->val_3); raycastM = translationM * transLocal2M * rotationM * scaleM * transLocal1M; // MVP = PV * translationM * transLocal2M * rotationM * scaleM * transLocal1M; }

    Read the article

  • Efficient skeletal animation

    - by Will
    I am looking at adopting a skeletal animation format (as prompted here) for an RTS game. The individual representation of each model on-screen will be small but there will be lots of them! In skeletal animation e.g. MD5 files, each individual vertex can be attached to an arbitrary number of joints. How can you efficiently support this whilst doing the interpolation in GLSL? Or do engines do their animation on the CPU? Or do engines set arbitrary limits on maximum joints per vertex and invoke nop multiplies for those joints that don't use the maximum number? Are there games that use skeletal animation in an RTS-like setting thus proving that on integrated graphics cards I have nothing to worry about in going the bones route?

    Read the article

  • Implementing camera for 2d side scroller game ?

    - by Mr.Gando
    Hello, I'm implementing a 2D side scroller for iOS (using C/C++ with OpenGL) (beat'em up style like double dragon/final fight ). My scenes are composed of one cyclical background image ( the end of the image connects perfectly with the beginning ). This is to produce a cyclical scroll effect. I was wondering how could I implement a camera that follows my player movement ? ( Resources / Links are greatly appreciated with explanations :) )

    Read the article

  • How to restrict paddle movement using Farseer Physics engine 3.2

    - by brainydexter
    I am new to using Farseer Physics Engine 3.2(FPE), so please bear with my questions. Also, since FPE 3.2 is based on Box2D, I have been reading Box2D manual and pieces of code scattered in samples to better understand terminology and usage. Pong is usually my testbed whenever I try to do something new. Here is one of the issue I am running into: How can I restrict paddles to move only along Y axis, because the ball comes in and knocks off the paddles and everything floats in space afterwards ? (Box = Rectangle and ball = circle) I know MKS is the unit system, but is there a recommendation for sizes/position to be used ? I know this is a very generic question, but it would be good to know a simple set of values that one could use for making a game as simple as pong. Between box2d and FPE, I have some doubts: what is the recommended way of making a body in FPE ? world.CreateBody() does not exist in FPE Box2d manual recommends never to "new" body(since Box2D uses Small Object allocators), so is there a recommended way in Farseer to create a body (apart from factories) ? In box2d, it is recommended to keep a track of the body object, since it is also the parent to fixture(s). Why is it that in most of the examples, the fixture object is tracked ? Is there a reason why body is not tracked ? Thanks

    Read the article

  • Software rendering 3d triangles in the proper order

    - by at.
    I'm implementing a basic 3d rendering engine in software (for education purposes, please don't mention to use an API). When I project a triangle from 3d to 2d coordinates, I draw the triangle. However, it's in a random order and so whatever gets drawn last draws on top of all other triangles (which might be in front of triangles it shouldn't be in front of)... Intuitively, seems I need to draw the triangles in the correct order. So I can calculate all their distances to the camera and sort by that. The objects furthest away get drawn last. Is this the proper way to render triangles? If I'm sorting all the objects, this is n*log(n) now. Is this the most efficient way to do this?

    Read the article

< Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440  | Next Page >