Search Results

Search found 22903 results on 917 pages for 'network namespace'.

Page 434/917 | < Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >

• How to subnet hosted VMs

  - by bwizzy

  I have a network of VMs each having a LAN IP address and a public IP address. They each have a 1:1 NAT map for public access via the public IP for HTTP, SSH etc. I'm trying to figure out a way to restrict the LAN IPs from talking to each other, but there are some cases where a group of LAN IPs will need to communicate. I'm using pfSense as a firewall / router on a 192.168.0.0/24 configuration. It seems like I could assign each VM it's own subnet and add a static route to the firewall for that VM to get back to the firewall for internet access / other fw rules. Is that right? I assigned 1 VM with: address 192.168.1.2 netmask 255.255.255.254 gateway 192.168.1.1 Then added a static route on the FW's LAN interface using 192.168.1.0/30 as the destination network and 192.168.1.1 as the gateway. Nothing appears to be working, anyone have any ideas? Please be aware I'm not that familiar with subnets. Thanks!

  Read the article

• SSH through standard Belkin router to Asus Tomato router

  - by Luke

  I've set up SSH on the Tomato firmware on an Asus N10, via port 22 with key authentication. I've tested the keys by connecting with putty directly to the router when connected to its network. That works OK. But this router is behind a Belkin (F5D7632-4) router which also acts as modem and when I try to connect through with the (dynamic) public IP it times out. I'm guessing it's something to do with the NAT? My putty settings are taken from various online tutorials, but it's set up for port 22, with the correct key as mentioned. The Belkin router has port forwarding to the Asus (192.168.2.3) for port 22 TCP and UDP set up. It's now tough to see what to do in order to connect to the Asus router with an external IP - if it's even possible. Ideally I would have liked to have only needed to use the Asus router, but as it doesn't act as a modem, I need to connect it to the Belkin to use Tomato's features. Perhaps there's a solution here too? Network: Internet -> Belkin modem/router -> Asus router (Tomato SSH) -> Devices

  Read the article

• Unable to send mail to hotmail from rackspace cloud

  - by Jo Erlang

  I'm having issue sending mail from postfix on a rackspace cloud instance for my domain. Hotmail says "550 SC-001 (SNT0-MC4-F35) Unfortunately, messages from 198.101.x.x weren't sent. Please contact your Internet service provider since part of their network is on our block list. " Here is the mail log Sep 20 08:02:59 mydomain postfix/smtpd[1810]: disconnect from localhost[127.0.0.1] Sep 20 08:02:59 mydomain postfix/smtp[1814]: 59CFF4B191: to=<[email protected]>, relay=mx3.hotmail.com[65.55.92.184]:25, delay=0.19, delays=0.1/0.01/0.06/0.01, dsn=5.0.0, status=bounced (host mx3.hotmail.com[65.55.92.184] said: 550 SC-001 (SNT0-MC4-F35) Unfortunately, messages from 198.101.x.x weren't sent. Please contact your Internet service provider since part of their network is on our block list. You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. (in reply to MAIL FROM command)) Sep 20 08:02:59 mydomain postfix/smtp[1814]: 59CFF4B191: lost connection with mx3.hotmail.com[65.55.92.184] while sending RCPT TO I have implemented rDNS, SPF and DKIM they all are looking fine. I have checked my IP and domain, on most of the spam black lists and it is listed as ok on those, (not listed as spamming IP) What should I try next?

  Read the article

• Windows Server 2008 backup VHD's - is it possible to mount/open in Windows 7?

  - by Simon

  Hi All, Is it possible to mount the VHD files created by the Windows Server 2008 backup utility onto a Windows 7 (release) client? Following an array failure I was very worried that there was a problem with both the backup sets on different USB drives as attaching the VHD to a Win 7 box did not show the expected structure (instead they behaved like unformatted disk space). Subsequently, I've attached the backup drive to a 2008r2 machine that I'd intended to be the replacement and the backup set can be browsed without issue (seemingly). When the new disks arrive I'll go through the recovery process and see where we are, but it looks promising so far. Is it simply the case that you can't take server created VHD's and mount them on desktop machines? (Rather than hyper-ventilating at the thought of years of lost photos and email, I'm now just mildly curious) Edit:One thing that has confused things is that the backup utility on Win7 is more restrictive about restoring from external devices than the equivilent on 2008r2. With r2, I can restore files 'from another server' and browse to external storage. Win7 only allows the back to be located on a network share. Once my box of new disks arrive and I've got something to restore onto, I'll move the smaller of the backup VHDs onto network storage reachable by Win7 and see if the VHD is readable. I haven't read up on the VHD process used by the backup app - I'm assuming it's a base VHD and differencing files used for incremental backups and that the restore app understands this. Finally: In retrospect the question should have been, 'can I restore a 2008r2 backup set via a Win 7 client' Thanks

  Read the article

• File in use when it's really not

  - by C-dizzle

  I am running Windows 7 Professional 32 bit on a Server 2008 network. I am getting a weird issue with an excel document where I open it up one morning, update it, save and close, the next morning I come in, open it up and it says "This file is in use and locked by csmith" which "csmith" is me! So I click on the cancel button, open it up again and it comes up fine. I can edit, save and close with no problem. But then have the same issue the next morning. Another weird thing is that we have a calendar shared in "Public Folders" under Outlook that seems to be having the same issue, which happens to be a calendar made in Excel. Exchange 2010 is installed on the server and the clients are using Exchange 2007. In the instance with the calendar, it will show conflicting edits have been made and you must keep one item or all items. And it shows an edit date of 4/24/2012 and 6/1/2012. But, there were NO edits done on 6/1, just tried opening it. This problem does not occur under my profile, but 2 others. These machines are ALSO running Windows 7 Professional 32 bit. We have a mix of Windows 7 and Windows XP machines on our network if that is any help. These issues did not start happening until we migrated from a server running Server 2003 and Exchange 2000, which the new server is running Server 2008 and Exchange 2010 as stated above. Is there something on the server side that is configured wrong?

  Read the article

• Simulated NAT Traversal on Virtual Box

  - by Sumit Arora

  I have installed virtual box ( with Two virtual Adapters(NAT-type)) - Host (Ubuntu -10.10) - Guest-Opensuse-11.4 . Objective : Trying to simulate all four types of NAT as defined here : https://wiki.asterisk.org/wiki/display/TOP/NAT+Traversal+Testing Simulating the various kinds of NATs can be done using Linux iptables. In these examples, eth0 is the private network and eth1 is the public network. Full-cone iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to-source iptables -t nat -A PREROUTING -i eth0 -j DNAT --to-destination Restricted cone iptables -t nat POSTROUTING -o eth1 -p tcp -j SNAT --to-source iptables -t nat POSTROUTING -o eth1 -p udp -j SNAT --to-source iptables -t nat PREROUTING -i eth1 -p tcp -j DNAT --to-destination iptables -t nat PREROUTING -i eth1 -p udp -j DNAT --to-destination iptables -A INPUT -i eth1 -p tcp -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -i eth1 -p udp -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -i eth1 -p tcp -m state --state NEW -j DROP iptables -A INPUT -i eth1 -p udp -m state --state NEW -j DROP Port-restricted cone iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to-source Symmentric echo "1" /proc/sys/net/ipv4/ip_forward iptables --flush iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE --random iptables -A FORWARD -i eth1 -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT What I did : OpenSuse guest with Two Virtual adapters - eth0 and eth1 -- eth1 with address 10.0.3.15 /eth1:1 as 10.0.3.16 -- eth0 with address 10.0.2.15 now running stund(http://sourceforge.net/projects/stun/) client/server : Server eKimchi@linux-6j9k:~/sw/stun/stund ./server -v -h 10.0.3.15 -a 10.0.3.16 Client eKimchi@linux-6j9k:~/sw/stun/stund ./client -v 10.0.3.15 -i 10.0.2.15 On all Four Cases It is giving same results : test I = 1 test II = 1 test III = 1 test I(2) = 1 is nat = 0 mapped IP same = 1 hairpin = 1 preserver port = 1 Primary: Open Return value is 0x000001 Q-1 :Please let me know If any has ever done, It should behave like NAT as per description but nowhere it working as a NAT. Q-2: How NAT Implemented in Home routers (Usually Port Restricted), but those also pre-configured iptables rules and tuned Linux

  Read the article

• Forwarding HTTP Request with Direct Server Return

  - by Daniel Crabtree

  I have servers spread across several data centers, each storing different files. I want users to be able to access the files on all servers through a single domain and have the individual servers return the files directly to the users. The following shows a simple example: 1) The user's browser requests http://www.example.com/files/file1.zip 2) Request goes to server A, based on the DNS A record for example.com. 3) Server A analyzes the request and works out that /files/file1.zip is stored on server B. 4) Server A forwards the request to server B. 5) Server B returns file1.zip directly to the user without going through server A. Note: steps 4 and 5 must be transparent to the user and cannot involve sending a redirect to the user as that would violate the requirement of a single domain. From my research, what I want to achieve is called "Direct Server Return" and it is a common setup for load balancing. It is also sometimes called a half reverse proxy. For step 4, it sounds like I need to do MAC Address Translation and then pass the request back onto the network and for servers outside the network of server A tunneling will be required. For step 5, I simply need to configure server B, as per the real servers in a load balancing setup. Namely, server B should have server A's IP address on the loopback interface and it should not answer any ARP requests for that IP address. My problem is how to actually achieve step 4? I have found plenty of hardware and software that can do this for simple load balancing at layer 4, but these solutions fall short and cannot handle the kind of custom routing I require. It seems like I will need to roll my own solution. Ideally, I would like to do the routing / forwarding at the web server level, i.e. in PHP or C# / ASP.net. However, I am open to doing it at a lower level such as Apache or IIS, or at an even lower level, i.e. a custom proxy service in front of everything. Thanks.

  Read the article

• Can't get rsync over sftp to work

  - by Patrik

  I'm trying to set up a backup system from an Ubuntu server to a Synology NAS (DS413j) using rsync and sftp. I have created a user for this that we can call ubuntu-backup. I have a directory in ubuntu-backup home directory called www where the backup will be saved. I have enabled Network Backup in DSM The user ubuntu-backup has full access to it's home directory Here is my rsync config file on the Synology NAS: #motd file = /etc/rsyncd.motd #log file = /var/log/rsyncd.log pid file = /var/run/rsyncd.pid lock file = /var/run/rsync.lock use chroot = no [NetBackup] path = /var/services/NetBackup comment = Network Backup Share uid = root gid = root read only = no list = yes charset = utf-8 auth users = root secrets file = /etc/rsyncd.secrets [ubuntu-backup] path = /volume1/homes/ubuntu-backup/www comment = Ubuntu Backup uid = ubuntu-backup gid = users read only = false auth users = ubuntu-backup secrets file = /etc/rsyncd.secrets The permissions on /volume1/homes/ubuntu-backup/www is ubuntu-backup:users 777 Here is the command i'm running. rsync -aHvhiPb /var/www/ [email protected]:./ The result: sending incremental file list ERROR: module is read only rsync error: syntax or usage error (code 1) at main.c(1034) [Receiver=3.0.9] rsync: connection unexpectedly closed (9 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(605) [sender=3.0.9] If I'm running this: rsync -aHvhiPb /var/www/ [email protected] It looks like its sending files. No errors. But I cant find anything on the NAS.

  Read the article

• How does Windows 7 DNS client work?

  - by Mark Allison

  I am using a local DHCP and DNS server on my home network on a linux machine. It is running CentOS 6.3 with dnsmasq 2.48. It's all working fine except for local DNS lookups for Windows machines only. I have a mix of Ubuntu, CentOS and Windows machines on the network, some virtual, some physical. I have a machine called boron and the domain is called localdomain If I ping boron from any linux machine, I get [root@lithium lists]# ping -c3 boron PING boron.localdomain (10.0.0.5) 56(84) bytes of data. 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=1 ttl=64 time=0.740 ms 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=2 ttl=64 time=0.478 ms 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=3 ttl=64 time=0.458 ms --- boron.localdomain ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2000ms rtt min/avg/max/mdev = 0.458/0.558/0.740/0.131 ms If I do it from my Windows 7 machine, I get: Ping request could not find host boron. Please check the name and try again. If I try ping boron.localdomain I get: Pinging boron.localdomain [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=16ms TTL=57 Reply from 67.215.65.132: bytes=32 time=188ms TTL=57 Reply from 67.215.65.132: bytes=32 time=15ms TTL=57 Reply from 67.215.65.132: bytes=32 time=14ms TTL=57 Ping statistics for 67.215.65.132: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 14ms, Maximum = 188ms, Average = 58ms which is clearly wrong. Why is it going out to the internet? Why can't my windows machine resolve the boron hostname to a FQDN? My Windows machines and linux machines get their network config from DHCP. UPDATE If I do ipconfig /all in Windows, it looks as I would expect: Windows IP Configuration Host Name . . . . . . . . . . . . : lanthanum Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : .localdomain Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : .localdomain Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 50-E5-49-38-FC-A2 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.0.0.57(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 23 August 2012 13:58:45 Lease Expires . . . . . . . . . . : 24 August 2012 07:58:48 Default Gateway . . . . . . . . . : 10.0.0.6 DHCP Server . . . . . . . . . . . : 10.0.0.6 DNS Servers . . . . . . . . . . . : 10.0.0.6 208.67.222.222 208.67.220.220 NetBIOS over Tcpip. . . . . . . . : Enabled When I do an nslookup I get: Server: carbon.localdomain Address: 10.0.0.6 *** carbon.localdomain can't find boron: Unspecified error However if I do ifconfig -a in Linux I get: [root@nitrogen ~]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:0C:29:AF:EC:2A inet addr:10.0.0.7 Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:187687 errors:0 dropped:0 overruns:0 frame:0 TX packets:5857 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:23910700 (22.8 MiB) TX bytes:712964 (696.2 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:329894 errors:0 dropped:0 overruns:0 frame:0 TX packets:329894 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:67153143 (64.0 MiB) TX bytes:67153143 (64.0 MiB) and nslookup: [root@nitrogen ~]# nslookup boron Server: 10.0.0.6 Address: 10.0.0.6#53 Name: boron Address: 10.0.0.5 Both machines are on the same network using the same DHCP server. UPDATE 2 I thought the issue was resolved but I am getting intermittent DNS resolving issues but only on my Windows 7 machine. All my linux boxes are fine. This is what happens when I ping and nslookup from Windows to a Windows 2008 Server: C:\Users\mark>nslookup magnesium Server: carbon.localdomain Address: 10.0.0.6 Name: magnesium.localdomain Address: 10.0.0.12 C:\Users\mark>ping magnesium Pinging magnesium.localdomain [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=267ms TTL=57 Reply from 67.215.65.132: bytes=32 time=162ms TTL=57 Reply from 67.215.65.132: bytes=32 time=510ms TTL=57 Reply from 67.215.65.132: bytes=32 time=146ms TTL=57 Ping statistics for 67.215.65.132: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 146ms, Maximum = 510ms, Average = 271ms And from Linux: [root@beryllium ~]# ping -c4 magnesium PING magnesium.localdomain (10.0.0.12) 56(84) bytes of data. 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=1 ttl=128 time=0.176 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=2 ttl=128 time=0.634 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=3 ttl=128 time=0.685 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=4 ttl=128 time=0.263 ms --- magnesium.localdomain ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3002ms rtt min/avg/max/mdev = 0.176/0.439/0.685/0.223 ms [root@beryllium ~]# nslookup magnesium Server: 10.0.0.6 Address: 10.0.0.6#53 Name: magnesium.localdomain Address: 10.0.0.12 UPDATE 3 I stopped the Windows DNS client on my Windows 7 machine with net stop dnscache and it is now working fine. It would be nice to get DNS working with the DNS client on, but I might be OK without it, what do you think?

  Read the article

• Remote management interface for managing ip6tables (or an alternative firewall)

  - by Matthew Iselin

  I'm working with IPv6 and have run into an issue configuring ip6tables on our main router in order to control what can come into the network. A default DROP rule in the FORWARD section has worked well (obviously leaving ESTABLISHED,RELATED as ACCEPT) to keep internal clients' open ports from being accessed. However, running an ip6tables command for every little change is unwieldy. Whilst we are able to continue creating rules manually, I'm wondering if there's some sort of management interface we could use to create the rules quickly and easily. We're looking to be able to save time working on our firewall as well as providing a simple method for modifying rules for those who will eventually replace us. I know webmin (heavily locked down on our network, naturally) has support for modifying iptables rules, but seemingly no support for ip6tables. Something similar would be fantastic. Alternatively, suggestions for a firewall solution apart from iptables/ip6tables which can be managed remotely wouldn't be out of order. A web interface for management is certainly preferable, even if it is just a wrapper with shiny buttons over the raw config files.

  Read the article

• The Server Fault Wiki of recommended practices [migrated]

  - by Avery Payne

  So I've noticed that there are several recommendations on basic practices on Server Fault, but there doesn't seem to be a cohesive view as to how those recommendations would all fit together. So I thought I would lump these together as a kind of mental exercise to see what the "ServerFault Community IT Department" would look like if it were implemented. This would give a few things: it would make a reasonable wiki (in the true wiki spirit of many contributions), it would provide several links to well-vetted practices, and it would be kind of fun to see what the amalgamation would look like. And who knows, it may even point out some interesting issues between different forms of "best practices", although I would be stunned if there was a conflict hidden in there someplace... Add your favorites from Server Fault as answers, and I'll re-edit this section with the results. Here's a few catagories to collect different ideas together. Hardware Configuration(s) Server room configuration. Server room temperature Firmware Updates and Scheduling Storage Configuration(s) Selecting a NAS box Linux: Dealing with /tmp Linux: Install apps in /var or /opt? Network Configuration(s) checking DNS health and compliance Security Practice(s) Password (General) Best Practices Password sharing methods Windows Update Updating Windows Servers that are hosts for VMs Network Service(s) User Service(s) User Naming & Deletion Upgrade Process(es) Disaster Recovery Checking Backups Documenting an outage for a post-mortem review Last Edit: 2010-02-17

  Read the article

• Valid IP address but can't surf without rebooting

  - by Kat

  I periodically lose internet and router connection at home. When this happens, others are using the router just fine. I am connecting directly through a wired connection to a Belkin router. I can release and renew the IP (and the IP addresses change to 0.0.0.0 and to an IP in my router's range beginning with 192.168.2. as they should) but still can't surf, can't access the router interface. Cycling the router doesn't help, and again, others are able to access the router fine at this time. Only rebooting the computer resolves the issue, and everything is wonderful for a few hours- and then I lose connection again. I have several ideas where to go from here, but I'd like to get some advice first. (Using Windows XP SP3, hardwired connection) Update As stated in the originally, releasing and renewing doesn't solve the issue. However, I have an update. I can ping localhost and my router IP with no problem at all when the issue occurs. However, repairing the network connection does not help. I AM able to get back on by disabling and then re-enabling the network connection in XP. What does that tell us?

  Read the article

• Creating Active Directory on an EC2 box

  - by Chiggins

  So I have Active Directory set up on a Windows Server 2008 Amazon EC2 server. Its set up correctly I think, I never got any errors with it. Just to test that I got it all set up correctly, I have a Windows 7 Professional virtual machine set up on my network to join to AD. I set the VM to use the Active Directory box as its DNS server. I type in my domain to join it, but I get the following error: DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "ad.win.chigs.me": The query was for the SRV record for _ldap._tcp.dc._msdcs.ad.win.chigs.me The following domain controllers were identified by the query: ip-0af92ac4.ad.win.chigs.me However no domain controllers could be contacted. Common causes of this error include: - Host (A) or (AAAA) records that map the names of the domain controllers to their IP addresses are missing or contain incorrect addresses. - Domain controllers registered in DNS are not connected to the network or are not running. It seems that I can talk to Active Directory, but when I'm trying to contact the Domain Controller, its giving a private IP to connect to, at least thats what I can make out of it. Here are some nslookup results. > win.chigs.me Server: ec2-184-73-35-150.compute-1.amazonaws.com Address: 184.73.35.150 Non-authoritative answer: Name: ec2-184-73-35-150.compute-1.amazonaws.com Address: 10.249.42.196 Aliases: win.chigs.me > ad.win.chigs.me Server: ec2-184-73-35-150.compute-1.amazonaws.com Address: 184.73.35.150 Name: ad.win.chigs.me Address: 10.249.42.196 win.chigs.me and ad.win.chigs.me are CNAME's pointing to my EC2 box. Any idea what I need to do so that I can join my virtual machine to the EC2 Active Directory set up I have? Thanks!

  Read the article

• Tcpreplaying using VMware

  - by Methos

  This is more like a testbed setup question. I want to use VMware to debug some networking code in the linux kernel in the VM. My VM has two network interfaces. What I want to do is replay the capture file in the host and receive the packets in the VM. My problem is I do not see replayed packets in the VM. I am running VMware and tcpreplay on the host as sudo. Hence I think there should not be any problem access devices files. I am running VMware workstation 7.0 a. I first began with Custom networking as that provides option of creating your own virtual network name. I wrote /dev/vmnet3 and /dev/vmnet4 for the two interfaces respectively. However, after booting the guest, I did not see any of these interfaces or devices files (in /dev) created on the host. b. Then I tried 'Host Only', but that does not show what bridge/device file is associated with the interface. c. Finally I tried bridged networking mode. I see vmnet1, vmnet8 and vboxnet0 on the host. I have tcpreplayed the capture file on each of these interfaces, for all the above three cases. I tried to capture packets in the VM using "tcpdump -i any". However, I do not see any packets. Any ideas/pointers?

  Read the article

• Cisco Spam Blocker, Iron Port, Lotus Domino, Integration Help

  - by NickToyota

  Hi serverfault universe, I work for a medium sized (roughly 200 user) company. We are attempting to intagrate our new Cisco Spam Video Blocker (ironport) device into our network so that it acts as an incoming filter then passes it off to our Lotus domino mail server. And also vise versa. The way our network is setup currently has an mx record pointing to our Domino mail SMTP incoming server which is currently setup to be an inbound gateway and filter (using symantec domino mail software). We want to replace the inbound gateway with the ironport. Our company has also invested in a pool of external IP addresses which I believe has been currently assigned to our web, email, servers. What would the proper course of action be to successfully integrate the device be? Mx record change? Replace the domino gateway completely with the ironport? We attempted to set the ironport device to the external IP of what our mx record is pointing to without much success. Any help on proper setup would be greatly appreciated.

  Read the article

• Accessing Virtual Host from outside LAN

  - by Ray

  I'm setting up a web development platform that makes things as easy as possible to write and test all code on my local machine, and sync this with my web server. I setup several virtual hosts so that I can access my projects by typing in "project" instead of "localhost/project" as the URL. I also want to set this up so that I can access my projects from any network. I signed up for a DYNDNS URL that points to my computer's IP address. This worked great from anywhere before I setup the virtual hosts. Now when I try to access my projects by typing in my DYNDNS URL, I get the 403 Forbidden Error message, "You don't have permission to access / on this server." To setup my virtual hosts, I edited two files - hosts in the system32/drivers/etc folder, and httpd-vhosts.conf in the Apache folder of my WAMP installation. In the hosts file, I simply added the server name to associate with 127.0.0.1. I added the following to the http-vhosts.conf file: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot "c:/wamp/www/ladybug" ServerName ladybug ErrorLog "logs/your_own-error.log" CustomLog "logs/your_own-access.log" common </VirtualHost> <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot "c:/wamp/www" ServerName localhost ErrorLog "logs/localhost-error.log" CustomLog "logs/localhost-access.log" common </VirtualHost> Any idea why I can't access my projects from typing in my DYNDNS URL? Also, is it possible to setup virtual hosts so that when I type in http://projects from a random computer outside of my network, I access url.dyndns.info/projects (a.k.a. my WAMP projects on my home computer)? Help is much appreciated, thanks!

  Read the article

• FreeBSD ZFS RAID-Z2 performance issues

  - by Axel Gneiting

  I'm trying to build my own network attached storage based on FreeBSD+ZFS+standard components, but there are strange performance issues. The hardware specs are: AMD Athlon II X2 240e processor ASUS M4A78LT-M LE mainboard 2GiB Kingston ECC DDR3 (two sticks) Intel Pro/1000 CT PCIe network adapter 5x Western Digital Caviar Green 1.5TB I created a RAID-Z2 zpool from all disks. I installed FreeBSD 8.1 on that zpool following the tutorial. The SATA controllers are running in AHCI mode. Output of zpool status: pool: zroot state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 raidz2 ONLINE 0 0 0 gptid/7ef815fc-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/80344432-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/81741ad9-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/824af5cb-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 gptid/82f98a65-eab6-11df-8ea4-001b2163266d ONLINE 0 0 0 The problem is that write performance on the pool is very very bad (<10 MB/s) and every application that is accessing the disk is unresponsive every few seconds when writing. It seems like writing is fine until the ZFS ark cache is full and then ZFS stalls the entire system I/O till it's finished writing that data. Also I'm getting kmem_malloc to small kernel panics. I've already tried to put vm.kmem_size="1500M" vm.kmem_size_max="1500M" into /boot/loader.conf, but it doesn't help. Does anyone know what's going on here? Am I really not having enough memory for ZFS to handle this RAID-Z2?

  Read the article

• server and user directly connected no pinging...

  - by jtzero

  I have a server(fedora 12) with two nics on it, directly connected to say 192.168.1.0 and 192.168.2.0 the route table looks like this Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 192.168.1.1 255.255.255.0 U 0 0 0 eth0 192.168.2.0 * 255.255.255.0 U 0 0 0 eth1 eth0 = 192.168.1.15 eth1 = 192.168.2.1 and a directly connected user (Mythdora) on the 192.168.2.0 network with ip 192.168.2.2 and route table like so Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 * 255.255.255.0 U 0 0 0 eth0 the cable is a crossover and it works all three nics work -- connected my laptop to either end and assign it a valid 192.168.2.0 ip the pings will work. In fact if I disconnect the server side and plug the eth cable into the laptop and have thte box ping the laptop continually remove the eth cable and plug it back into the server both sides ping... unfortunately the box realizing it's connected to a different pc wipes its route table after say ten minutes or so. if I do a trace route from a box on the 1.0 network to the servers 192.168.2.1 interface never get a reply from it. as a note at one point I could ping the server from the 192.168.2.2 box but the server couldnt ping the 192.168.2.2 box.

  Read the article

• OpenVPN with MacOS X Client and same subnets in local and remote net.

  - by Daniel

  I have a homenetwork 192.168.1.0/24 with gteway 192.168.1.1 and a remote network with the same parameters. Now I want to create a OpenVPN tunnel between those networks. I have no problems with Windows, because Windows routes everything to 192.168.1.0/24 except 192.168.1.1 throught the tunnel. On MacOS X however I see the folling line in the Details window: 2010-05-10 09:13:01 WARNING: potential route subnet conflict between local LAN [192.168.1.0/255.255.255.0] and remote VPN [192.168.1.0/255.255.255.0] When I list the routes I get the following: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 13 3 en1 127 localhost UCS 0 0 lo0 localhost localhost UH 12 3589 lo0 169.254 link#5 UCS 0 0 en1 192.168.1 link#5 UCS 1 0 en1 192.168.1.1 0:1e:e5:f4:ec:7f UHLW 13 17 en1 1103 192.168.1.101 localhost UHS 0 0 lo0 192.168.6 192.168.6.5 UGSc 0 0 tun0 192.168.6.5 192.168.6.6 UH 1 0 tun0 My Interfaces are en1 - My local Wifi network tun0 - The tunnel interface As can be seen from the routes above there is no entry for 192.168.1.0/24 that routes the traffic through the tunnel interface. When I manually route a single IP like 192.168.1.16 over the tunnel gateway 192.168.6.6, this works. Q: How do I set up my routes in MacOS X for the same behaviour as on windows, to route everything except 192.168.1.1 through the tunnel, but leave the default gateway to be my local 192.168.1.1 ?

  Read the article

• Windows Server 2008 R2 - Cannot Change DNS Domain Context on Some Machines

  - by Richie086

  So I have a small Windows Server 2008 R2 network consisting of a domain controller, a file server, sql server, etc. All machines are joined to a windows domain (CPUSHIELD.COM) and show up in Active Directory Users and Computers under the Computers OU. Each computer has a DNS record as well that was populated when I joined each computer to the domain. However, when I go to my SQL server VM (which is joined to CPUSHIELD.COM) and try to add domain users or groups to the local users or groups on my file server (which is a physical machine) or my sql server (which is a virtual machine), for some reason I cannot change the context to the CPUSHIELD.COM domain.. For example: Here is the really strange thing, I have two other servers on my network that do show CPUSHIELD.COM in the From This Location field (as I would expect with any machine joined to a domain) and I am able to search the local machine and/or domain for users/groups to add. I have done hundreds of Windows Server 2008 installs and this is the first time I have run into this issue. Any ideas? Let me know if you need more info

  Read the article

• Multiple WAN interfaces on SonicWall TZ 100?

  - by Chad Decker

  I'm using a SonicWall TZ 100 with a basic configuration of X0 for the LAN and X1 for the WAN. The WAN uses DHCP to obtain its routable IP address. I want to obtain a second routable IP from my ISP. I'm in luck because my cable company will provide me with an additional dynamic IP for $5/mo. How do I bind this IP to my SonicWall? My additional dynamic IP will not be consecutive to the original one. It won't even be on the same class C. I think what I want to do is to use one of the empty ports/interfaces (X2, X3, or X4), tell that interface to use DHCP, and then add that interface to the WAN "zone". I can't figure out how to do this though. Here's what I've tried so far: (1) I've looked in Network Interfaces. I see X0 and X1 but the other unused interfaces don't show up. I don't see an "Add" button to add the new interfaces. (2) I've looked in Network Zones. I see that X0, X2, X3, X4 are in the LAN zone. I tried to drag X3 into the WAN zone but I can't. Nor does clicking the "Configure" button allow me to move an unused interface from LAN to WAN. (3) I've read the post entitled Splitting up multiple WAN's on Sonicwall. This doesn't seem applicable to me. Any thoughts?

  Read the article

• Google Chrome doesn't want to access Facebook

  - by Pieter van Niekerk

  I have been experiencing a bit of a problem with Chrome over the last couple of days where it doesn't want to access Facebook. When I open Chrome it works fine for a while and then if I were to refresh the page it would give me the Chrome 'This webpage is not available' message. This webpage is not available Google Chrome could not load the webpage because www.facebook.com took too long to respond. The website may be down, or you may be experiencing issues with your Internet connection. Here are some suggestions: Reload this webpage later. Check your Internet connection. Restart any router, modem, or other network devices you may be using. Add Google Chrome as a permitted program in your firewall's or antivirus software's settings. If it is already a permitted program, try deleting it from the list of permitted programs and adding it again. If you use a proxy server, check your proxy settings or contact your network administrator to make sure the proxy server is working. If you don't believe you should be using a proxy server, adjust your proxy settings: Go to the wrench menu Options Under the Hood Change proxy settings... LAN Settings and deselect the "Use a proxy server for your LAN" checkbox. This problem only persists when using the proxy and doesn't occur at all when not on the proxy. I have also tried different browsers (IE9 and Firefox 9.01) but it doesn't occur in any of them. This problem goes away for a while when I restart Chrome, only to happen again a couple of minutes later. I have tried deleting the cookies for Facebook without restarting Chrome, but to no avail. I am using Windows7 with Chrome 17

  Read the article

• Xen PV packet loss

  - by Delphinator

  I'm having some serious issues with packetloss with one of my servers. This server is a somewhat old (P4-era) machine running Debian Squeeze and Xen 4.0. There are two domUs running on it (both also Debian Squeeze), one gateway and a fileserver. Unfortunatly the processor has no virtualization extensions, therefore only PV can be used. While investigating why our network seems to be slower than it should I found some pretty bad packet loss (~25%). After further investigation and several experiments I did a measurment between the dom0 and one of the domUs: Server listening on UDP port 5001 Receiving 1470 byte datagrams UDP buffer size: 110 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to dom0, UDP port 5001 Sending 1470 byte datagrams UDP buffer size: 110 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.1.2(domU) port 33817 connected with 192.168.1.100(dom0) port 5001 [ 4] local 192.168.1.2(domU) port 5001 connected with 192.168.1.100(dom0) port 48606 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 46.3 MBytes 38.7 Mbits/sec [ 3] Sent 33020 datagrams [ 3] Server Report: [ 3] 0.0-10.0 sec 46.2 MBytes 38.6 Mbits/sec 0.030 ms 89/33019 (0.27%) [ 3] 0.0-10.0 sec 1 datagrams received out-of-order [ 4] 0.0-10.2 sec 43.0 MBytes 35.3 Mbits/sec 13.074 ms 11575/42256 (27%) tl;dr: 27% packet loss from dom0 to domU with 50Mbit UDP packets. Same thing happens from anywhere in the network. The problem gets better for smaller bandwidths (0.047% for 5Mbit) and worse for higher (59% for 200Mbit) ones. I did increase the CPU-weight of the dom0, there is no swapping going on, and actual networking-hardware is not involved. I never expected Xen (or anything related) to drop packets, and I'm completly clueless what to try next.

  Read the article

• RDP or SSH connection trough Windows 2008 server VPN hang after a while

  - by xt4fs

  I have been experiencing a very strange issue with our VPN setup on Windows Server 2008. That server is running as a Xen Virtual Machine. We use it for two purposes, permit our mobile workers to connect to another server hosted somewhere else that only allow that ip, and use it to RDP or ssh to many other virtual machine on the same server. The server has no performance issue and still a load of memory free. All other virtual machine has no problem whatsoever. Many of those virtual machine have public IP (web servers) and all their firewall are set to allow only ssh connection or RDP connection from their local interface. When I am connecting directly with either ssh or RDP to one of the other virtual machine everything run without any issues. However, when I am doing so through the VPN after some time the connection just hang, it usually continue after some time (5 or 10 minutes). It seems as more there is network usage more often it happen to a point where it is completely unusable. The worst thing I can do to hang it faster is to actually ping the vpn client IP from the local network, after some time the latency increase until it hang. This happen even if I do RDP to the local ip of the VPN server trough the VPN. The server report no problem and if I disconnect to the vpn and reconnect right away everything is alright. There is nothing wrong in the VPN server log. I have taught at the beginning that it could have been an issue with the Host server so I try to RDP,ssh directly to the guest and I have experience no issue while doing this, so it really seems to be a problem with the VPN server on Windows server 2008. Another very weird thing is it does not seems to be of any issue if you only do Internet (NAT) without trying to connect to any local ips.

  Read the article

• Which is the fastest way to move 1Petabyte from one storage to a new one?

  - by marc.riera

  First of all, thanks for reading, and sorry for asking something related to my job. I understand that this is something that I should solve by myself but as you will see its something a bit difficult. A small description: Now Storage = 1PB using DDN S2A9900 storage for the OSTs, 4 OSS , 10 GigE network. (lustre 1.6) 100 compute nodes with 2x Infiniband 1 infiniband switch with 36 ports After Storage = Previous storage + another 1PB using DDN S2A 990 or LSI E5400 (still to decide) (lustre 2.0) 8 OSS , 10GigE network 100 compute nodes with 2x Infiniband Previous experience: transfered 120 TB in less than 3 days using following command: tar -C /old --record-size 2048 -b 2048 -cf - dir | tar -C /new --record-size 2048 -b 2048 -xvf - 2>&1 | tee /tmp/dir.log So , big problem here, using big mathematical equations I conclude that we are going to need 1 month to transfer the data from one side to the new one. During this time the researchers will need to step back, and I'm personally not happy with this. I'm telling you that we have infiniband connections because I think that may be there is a chance to use it to transfer the data using 18 compute nodes (18 * 2 IB = 36 ports) to transfer the data from one storage to the other. I'm trying to figure out if the IB switch will handle all the traffic but in case it just burn up will go faster than using 10GigE. Also, having lustre 1.6 and 2.0 agents on same server works quite well, with this there is no need to go by 1.8 to upgrade the metadata servers with two steps. Any ideas? Many thanks Note 1: Zoredache, we can divide it in two blocks (A)600Tb and (B)400Tb. The idea is to move (A) to new storage which is lustre2.0 formated, then format where (A) was with lustre2.0 and move (B) to this lustre2.0 block and extend with the space where (B) was. This way we will end with (A) and (B) on separate filesystems, with 1PB each.

  Read the article

< Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >