Search Results

Search found 24211 results on 969 pages for 'shell command'.

Page 435/969 | < Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >

• Routing WIFI and LAN for specific traffic

  - by jakebird451

  I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing.

  Read the article

• Weekly cron executing 2 times:

  - by yes123

  Hi guys, I have placed a .sh file that runs a php script weekly. This script should run only once, but every sunday it runs at: 1:30 am 6:50 am Any way to fix this? Add1: /etc/cron.weekly/cronweek: #!/bin/bash /usr/bin/php -f /home/my/path/to/script/cronweek.php Add2: crontab file: # /etc/crontab: system-wide crontab # Unlike any other crontab you don't have to run the `crontab' # command to install the new version when you edit this file # and files in /etc/cron.d. These files also have username fields, # that none of the other crontabs do. SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # m h dom mon dow user command 17 * * * * root cd / && run-parts --report /etc/cron.hourly 25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) 47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) 52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly ) # */1 * * * * root /usr/local/rtm/bin/rtm 35 > /dev/null 2> /dev/null

  Read the article

• How to Set Up an SMTP Submission Server on Linux

  - by Kevin Cox

  I was trying to set up a mail server with no luck. I want it to accept mail from authenticated users only and deliver them. I want the users to be able to connect over the internet. Ideally the mail server wouldn't accept any incoming mail. Essentially I want it to accept messages on a receiving port and transfer them to the intended recipient out port 25. If anyone has some good links and guides that would be awesome. I am quite familiar with linux but have never played around with MTA's and am currently running debian 6. More Specific Problem! Sorry, that was general and postfix is complex. I am having trouble enabling the submission port with encryption and authentication. What Works: Sending mail from the local machine. (sendmail [email protected]). Ports are open. (25 and 587) Connecting to 587 appears to work, I get a "need to starttls" warning and starttls appears to work. But when I try to connect with the next command I get the error below. # openssl s_client -connect localhost:587 -starttls smtp CONNECTED(00000003) depth=0 /CN=localhost.localdomain verify error:num=18:self signed certificate verify return:1 depth=0 /CN=localhost.localdomain verify return:1 --- Certificate chain 0 s:/CN=localhost.localdomain i:/CN=localhost.localdomain --- Server certificate -----BEGIN CERTIFICATE----- MIICvDCCAaQCCQCYHnCzLRUoMTANBgkqhkiG9w0BAQUFADAgMR4wHAYDVQQDExVs b2NhbGhvc3QubG9jYWxkb21haW4wHhcNMTIwMjE3MTMxOTA1WhcNMjIwMjE0MTMx OTA1WjAgMR4wHAYDVQQDExVsb2NhbGhvc3QubG9jYWxkb21haW4wggEiMA0GCSqG SIb3DQEBAQUAA4IBDwAwggEKAoIBAQDEFA/S6VhJihP6OGYrhEtL+SchWxPZGbgb VkgNJ6xK2dhR7hZXKcDtNddL3uf1YYWF76efS5oJPPjLb33NbHBb9imuD8PoynXN isz1oQEbzPE/07VC4srbsNIN92lldbRruDfjDrAbC/H+FBSUA2ImHvzc3xhIjdsb AbHasG1XBm8SkYULVedaD7I7YbnloCx0sTQgCM0Vjx29TXxPrpkcl6usjcQfZHqY ozg8X48Xm7F9CDip35Q+WwfZ6AcEkq9rJUOoZWrLWVcKusuYPCtUb6MdsZEH13IQ rA0+x8fUI3S0fW5xWWG0b4c5IxuM+eXz05DvB7mLyd+2+RwDAx2LAgMBAAEwDQYJ KoZIhvcNAQEFBQADggEBAAj1ib4lX28FhYdWv/RsHoGGFqf933SDipffBPM6Wlr0 jUn7wler7ilP65WVlTxDW+8PhdBmOrLUr0DO470AAS5uUOjdsPgGO+7VE/4/BN+/ naXVDzIcwyaiLbODIdG2s363V7gzibIuKUqOJ7oRLkwtxubt4D0CQN/7GNFY8cL2 in6FrYGDMNY+ve1tqPkukqQnes3DCeEo0+2KMGuwaJRQK3Es9WHotyrjrecPY170 dhDiLz4XaHU7xZwArAhMq/fay87liHvXR860tWq30oSb5DHQf4EloCQK4eJZQtFT B3xUDu7eFuCeXxjm4294YIPoWl5pbrP9vzLYAH+8ufE= -----END CERTIFICATE----- subject=/CN=localhost.localdomain issuer=/CN=localhost.localdomain --- No client certificate CA names sent --- SSL handshake has read 1605 bytes and written 354 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: E07926641A5EF22B15EB1D0E03FFF75588AB6464702CF4DC2166FFDAC1CA73E2 Session-ID-ctx: Master-Key: 454E8D5D40380DB3A73336775D6911B3DA289E4A1C9587DDC168EC09C2C3457CB30321E44CAD6AE65A66BAE9F33959A9 Key-Arg : None Start Time: 1349059796 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- 250 DSN read:errno=0 If I try to connect from evolution I get the following error: The reported error was "HELO command failed: TCP connection reset by peer".

  Read the article

• Setting up logging for a remote backup script

  - by Brian Dainis

  So I wrote up a short script that I am planning to run via a cron job daily to package up my site files and send them to a remote location. I also plan to incorporate DB dumps, but I have not gotten that far yet. My issue today however is that Im am uncertain how to log the output of each command for errors, warnings, or other pertinent information the command may output. I would also like to install sometype of fail safe so if something goes horribly wrong the script will stop dead in its tracks and notify me via email or something. Ok the email thing is not as critical, but would be nice. Does anybody have any ideas for that? Here is what I have so far. By the way, both servers are CentOS 6.2 running standard LAMP. #!/bin/sh ################################# ### Set Vars ################################# THEDATE=`date +%m%d%y%H%M` ################################# ### Create Archives ################################# tar -cf /root/backups/files/server_BAK_${THEDATE}.tar -C / var/www/vhosts gzip /root/backups/files/server_BAK_${THEDATE}.tar ################################# ### Send Data to Remote Server ################################# scp /root/backups/files/server_BAK_${THEDATE}.tar.gz user@host:/home/bak1/ftp/backups/ ################################# ### Remove Data from this Server ################################# rm -rf /root/backups/files/server_BAK_${THEDATE}.tar.gz

  Read the article

• 404 not found error for virtual host

  - by qubit

  Hello, In my /etc/apache2/sites-enabled, i have a file site2.com.conf, which defines a virtual host as follows : <VirtualHost *:80> ServerAdmin hostmaster@wharfage ServerName site2.com ServerAlias www.site2.com site2.com DirectoryIndex index.html index.htm index.php DocumentRoot /var/www LogLevel debug ErrorLog /var/log/apache2/site2_error.log CustomLog /var/log/apache2/site2_access.log combined ServerSignature Off <Location /> Options -Indexes </Location> Alias /favicon.ico /srv/site2/static/favicon.ico Alias /static /srv/site2/static # Alias /media /usr/local/lib/python2.5/site-packages/django/contrib/admin/media Alias /admin/media /var/lib/python-support/python2.5/django/contrib/admin/media WSGIScriptAlias / /srv/site2/wsgi/django.wsgi WSGIDaemonProcess site2 user=samj group=samj processes=1 threads=10 WSGIProcessGroup site2 </VirtualHost> I do the following to enable the site : 1) In /etc/apache2/sites-enabled, i run the command a2ensite site2.com.conf 2) I then get a message site successfully enabled, and then i run the command /etc/init.d/apache2 reload. But, if i navigate to www.site2.com, i get 404 not found. I do have an index.html in /var/www (permissions:777 and ownership www-data:www-data), and i have also verified that a symlink was created for site2.com.conf in /etc/apache2/sites-enabled. Any way to fix this ? Thank you.

  Read the article

• Looking for a software / something to automate some simple audio processing

  - by Daniel Magliola

  I'm looking for a way to take a 1-hour podcast MP3 file and split it into several several 2-minute MP3s. Along the way, I'd like to also do a few things like Amplify the volume. The problem I'm solving is that I have a crappy MP3 player that won't let me seek forward or backward, nor will it remember where I left it when I turn it off, plus, I listen to these in a seriously high-noise situation. Thus, I need to be able to skip forward in large chunks (2-5 minutes) to the point where I left it. Is there any decent way to do this? Audacity doesn't seem to have command-line capabilities. I'm willing to write some code, for example, to call something over the command line and get how long the MP3 file is, to later know how many pieces i'll have, and then say "create an MP3 with 0:00 to 2:00", "create an MP3 with 2:00 to 4:00", etc. I'm also willing to pay for the right tools if necessary. I also don't care how slow this runs, as long as I can automate it :-) I'm doing this on Windows. Any pointers / ideas? Thanks!

  Read the article

• Is it better to always copy and delete, rather than move?

  - by nbolton

  Generally speaking, I find myself panicking when I realise that if I cancel a file move, it could cause the target or source to be incomplete. This question applies to Windows and Unix-based platforms. I can never remember exactly how the move command works in either case. For example, if you're moving a directory; does it copy the entire directory, then delete it after, or does it copy then delete each file individually? I always realise after typing something like, mv verybigdir dest that I really should have typed cp -R verybigdir dest && rm verybigdir (where the && operator only moves to the next command if the first was successful) -- or is this pointless? What happens exactly when I press Ctrl+C half way through a move? Likewise, what exactly happens on Windows when I press the cancel button? I can't count the number of times I've moved something (the last time was when using svn) and had two directories, with split contents. I guess the answer is difficult, because not all applications move groups of files in the same way.

  Read the article

• Windows 7 BSOD on boot after windows update

  - by Razor Storm

  After Windows updates today, I restarted my desktop (for the first time in a couple weeks), and on boot up ran into a BSOD: STOP: 0x0000007E (0xFFFFFFFFC0000005, 0xFFFFF8000355AB5A, 0xFFFFF880031CB3A8, 0xFFFFF880031CAC10) I tried system restore, but there was only 1 restore point which was from all the way back in January. I tried it anyway but after 10 minutes of running it said system restore could not be completed. Additional info: I checked my BIOS and it is detecting my rams. CPU is Intel Sandy Bridge i5-2500k overclocked to 4.3GHz. I reclocked it back to stock speeds (3.3 GHz) in case it was causing the issue (I highly doubt that it is). But the problem persists. Running Windows 7. 12 GB of RAM at 1333 MHz OS on 64gb SSD. What is causing this? How should I fix it? Also, if it is caused by windows update, is there a way to undo the update with command prompt? I tried safemode, and the blue screen comes up as well, but I am able to access command prompt.

  Read the article

• Access to CD/DVD Drive is Denied through Windows 7 Explorer (Permission Problem)

  - by Synetech inc.

  A while ago I started having trouble with my optical drives. Both of them keep showing up in Explorer as CD/DVD drives on boot, but as soon as I put a disc in either one, it suddenly turns into a hard-drive—“local disk” is displayed in the Type column, though the File System column remains UDF/CDFS. (I though that maybe it was a permission issue on the registry key in HKLM\System\CurrentControlSet..., but I’m not so certain because of the next test.) When I try to open a disc (of any type), I get an access denied error message. If I open an elevated command-prompt, I am able to access the files. Also, if I kill Explorer and run it from an elevated command-prompt (thus giving Explorer elevated permissions), then I can access the files from Explorer. I’ve tried uninstalling and reinstalling the devices without success. The security dialog indicates that there are none set for the drives (no owner and no permissions). I tried setting the owner, but am only able to do so if there is a disc in it (it complains if it is empty), but the settings do not stick (if I immediately open the security dialog after setting it, it is empty again). I tried setting permissions, but that gives an error. I’ve included a screencap-flowchart of the security dialog of one of the drives below. (Yes, I made sure that there are no upper- or lower-filters, and yes, I ran sfc. I also made sure that in the policy editor, “devices: restrict CD-ROM...” is not set.) Does anyone know what the owner and permissions are supposed to be for optical drives and how to reset them?

  Read the article

• Strange File-Server I/O Spikes - What Is Causing This?

  - by CruftRemover

  I am currently having a problem with a small Linux server that is providing file-sharing services to four Windows 7 32-bit clients. The server is an AMD PhenomX3 with two Western Digital 10EADS (1TB) drives, attached to a Gigabyte GA-MA770T-UD3 mainboard and running Ubuntu Server 10.04.1 LTS. The client machines are taking an extremely long time to access/transfer data on the file server. Applications often become non-responsive while trying to open files located remotely, or one program attempting to open a file but having to wait will prevent other software from accessing network resources at all. Other examples include one image taking 20 seconds or more to open, and in one instance a user waited 110 seconds for Microsoft Word 2007 to save a document. I had initially thought the problem was network-related, but this appears not to be the case. All cables and switches have been tested (one cable was replaced) for verification. This was additionally confirmed when closing down all client machines and rebooting the server resulted in the hard-drive light staying on solid during the startup process. For the first 15 minutes during boot, logon and after logging on (with no client machines attached), the system displayed a load average of 4 or higher. Symptoms included waiting several minutes for the logon prompt to appear, and then several minutes for the password prompt to appear after typing in a user name. After logon, it also took upwards of 45 seconds for the 'smartctl' man page to appear after the command 'man smartctl' was issued. After 15 minutes of this behaviour, the load average dropped to around 0.02 and the machine behaved normally. I have also considered that the problem is hard-drive-related, however diagnostic programs reveal no drive problems. Western Digital DLG, Spinrite and SMARTUDM show no abnormal characteristics - the drives are in perfect health as far as the hardware is concerned. I have thus far been completely unable to track down the cause of this problem, so any help is greatly appreciated. Requested Information: Output of 'free' hxxp://pastebin.com/mfsJS8HS (stupid spam filter) The command 'hdparm -d /dev/sda1' reports: HDIO_GET_DMA failed: Inappropriate ioctl for device (the BIOS is set to AHCI - I probably should have mentioned that).

  Read the article

• How to copy a floppy boot disk?

  - by Sammy

  I have a floppy boot disk and I would like to copy it to preserve it, as a backup. If I have two floppy drives, A and B, how can I copy the disk? Assuming one has two floppy drives Can I simply insert the floppy disk in one of the drives and then an empty floppy disk in the other and issue a simple command like this one. A:\>copy . b: Will this only copy the contents of the current directory and none of the files in subdirectories? Do I have to explicitly specify the option to copy everything? Also, what about the boot information? That won't get copied, right? If one has only one floppy drive... How do you copy a floppy disk if you only have one floppy drive? Do you in fact have to copy its contents to the local hard drive C and then copy that to an empty floppy disk using the same floppy drive? A:\>copy . c:\floppydisk A:\> A:\>c: C:\> C:\>copy floppydisk a: C:\> I'm guessing I will need some type of disk image tool to really copy everything on a bootable floppy disk. Something like the dd command on Linux perhaps? Am I right?

  Read the article

• Windows 7 scheduled task returns 0x2

  - by demmith

  I have identical scheduled tasks running in Windows XP Pro and Windows 7. The XP Pro one runs fine, the Windows 7 one always returns 0x2 (which means, "The system cannot find the file specified"; however, executing from the command line is no problem) in the Last Run Result column of the Task Scheduler UI. The scheduled task executes a .bat file daily. The .bat file contains a call to execute a Perl script. As I stated in the previous paragraph, it executes under XP without any trouble but under Windows 7, no dice. The task under Windows 7 is set to "run whether the user is logged on or not." In this case it is me, I am the only user of the system. It is also set to "Run with highest privileges." And it is not hidden. The .bat file executes perfectly well from the command line - it calls the Perl script as expected and the Perl script does its thing. I have searched far and wide looking for an appropriate answer to this issue. So far I have found nothing. What the devil is going on with this Win7 scheduled task? I am ready to pull my hair out.

  Read the article

• HPET missing from available clocksources on CentOS

  - by squareone

  I am having trouble using HPET on my physical machine. It is not available, even though I have enabled it in my bios, forced it in grub, and triple checked my kernel to include HPET in its compilation. Motherboard: Supermicro X9DRW Processor: 2x Intel(R) Xeon(R) CPU E5-2640 SAS Controller: LSI Logic / Symbios Logic SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] (rev 03) Distro: CentOS 6.3 Kernel: 3.4.21-rt32 #2 SMP PREEMPT RT x86_64 GNU/Linux Grub: hpet=force clocksource=hpet .config file: CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_HPET=y dmesg | grep hpet: Command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet Kernel command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet cat /sys/devices/system/clocksource/clocksource0/current_clocksource: tsc cat /sys/devices/system/clocksource/clocksource0/available_clocksource: tsc jiffies What is even more confusing, is that I have about a dozen other machines that utilize the same kernel .config, and can use HPET fine. I fear it is a hardware issue, but would appreciate any advice or help with getting HPET available. Thanks in advance!

  Read the article

• How can I automate or script daily downloads for any new anti- virus databases, and then have the program scan my drive?

  - by Macgrimm

  Howdy all Super Users" I humbly ask if any Super User can direct this long time, gray haired Apple Tech in the right direction on this issue. I believe there probably are many ways to skin this cat. But I am looking to find simply the best, most unattended way to get it done. Any help will be greatly appreciated. also (I know there are much better softwares out there for the Mac so please don't go there! The politics of this company dictate which Anti virus we have to use) anyway without any further wait: basically I am trying to automate 2 very important functions of Mc'Afee anti-virus for Mac. First I want to automate the process of retrieving new virus definition files, and second I want to automate the process of scanning for viruses. It turns out that Using Mc'Afee Anti-Virus for the Mac are both manual functions. And they left up to the user (per user account) to perform. Depending on all of about 150 MAc users to perform these 2 tasks themselves is around 65% compliance. My question then is: If I wanted to use the command line such as (open /Applications/McAfee\ Security.app) It will open up the Security Console. But how can I make command Mc'Afee go out and grab the definition files and scan the computer? I have to admit I am at a crossroad and Macaltimers has set in. I would really appreciate it if any of you "Super ~ Users" can help me out with this MacAltimers loss of how to what to do. Thanks to All up Front Macgrimm

  Read the article

• debian lenny email server

  - by Dal

  Hi I am a newbie and set up a debian lenny at home and set up the web and email server in the default installation. I followed the instructions for Exim and ran dpkg-reconfigure exim4-config and set it up for mydomainhere.com. I created a one line message file and attempted to test exim by running the command exim [email protected] < msgfile. I also tried using exim4 Exim but i get same error -bash: Exim: command not found. Obviously I am ignorant on how to run exim and test. I also tried to run a php file that sends a test mail and had no success. That script is tested and works fine if I send it from my hosting isp on a different domain. So I know the php script is good. I set up the debian system behind a netgear firewall and uses 192.168.1.x ip . The web server works great and users can visit my site. But I am lack the knowledge on how to get the email working. Appreciate is someone can guide me.

  Read the article

• How to access Virtual machine using powershell script

  - by Sheetal

  I want to access the virtual machine using powershell script. For that I used below script, Enter-PSSession -computername sheetal-VDD -credential compose04.com\abc.xyz1 where, sheetal-VDD is hostname of virtual machine compose04.com is the domain name of virtual machine and abc.xyz1 is the username of virtual machine After entering above command , it asks for password. When the password is entered I get below error, Enter-PSSession : Connecting to remote server failed with the following error message : WinRM cannot process the reques t. The following error occured while using Kerberos authentication: There are currently no logon servers available to s ervice the logon request. Possible causes are: -The user name or password specified are invalid. -Kerberos is used when no authentication method and no user name are specified. -Kerberos accepts domain user names, but not local user names. -The Service Principal Name (SPN) for the remote computer name and port does not exist. -The client and remote computers are in different domains and there is no trust between the two domains. After checking for the above issues, try the following: -Check the Event Viewer for events related to authentication. -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or us e HTTPS transport. Note that computers in the TrustedHosts list might not be authenticated. -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic. At line:1 char:16 + Enter-PSSession <<<< -computername sheetal-VDD -credential compose04.com\Sheetal.Varpe + CategoryInfo : InvalidArgument: (sheetal-VDD:String) [Enter-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : CreateRemoteRunspaceFailed Can someone help me out in this?

  Read the article

• if I define `my_domain`, postfix does not expand mail aliases

  - by Norky

  I have postfix v2.6.6 running on CentOS 6.3, hostname priest.ocsl.local (private, internal domain) with a number of aliases supportpeople: [email protected], [email protected], [email protected] requests: "|/opt/rt4/bin/rt-mailgate --queue 'general' --action correspond --url http://localhost/", supportpeople help: "|/opt/rt4/bin/rt-mailgate --queue 'help' --action correspond --url http://localhost/", supportpeople If I leave postfix with its default configuration, then the aliases are resolved correctly/as I expect, so that incoming mail to, say, [email protected] will be piped through the rt-mailgate mailgate command and also be delivered (via the mail server for ocsl.co.uk (a publicly resolvable domain)) to [email protected], user2, etc. The problem comes when I define mydomain = ocsl.co.uk in /etc/postfix/main.cf (with the intention that outgoing mail come from, for example, [email protected]). When I do this, postfix continues to run the piped command correctly, however it no longer expands the nested aliases as I expect: instead of trying to deliver to [email protected], user2 etc, it tries to send to [email protected], which does not exist on the upstream mail server and generates NDRs. postconf -n for the non-working configuration follows (the working configuration differs only by the "mydomain" line. alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all inet_protocols = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost mydomain = ocsl.co.uk newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550 We did have things working as we expected/wanted previously on an older system running Sendmail.

  Read the article

• how check all of my file copy correctly by batch file?

  - by rima

  Dear all friends I have a batch file that copy all the files from src place to dest place. I used xcopy command. Now I want to make sure all of my file copy correctly and delete all the files in src folder, do you have any idea? I dont know is there any command for delete the folder with all the files and folder inside it? please advise me.... my source folder has below structure > root | > [sub folder1] > | > filex.s > filei.z > [sub folder2] > | > filep.a > fileq.q > [sub folder3] > | > filex.s > filei.z > filsi.w > file1.xx > file2.cc > file3.ss

  Read the article

• What Logs / Process Stats to monitor on a Ubuntu FTP server?

  - by Adam Salkin

  I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

  Read the article

• S3sync not working

  - by user57833

  Hello, I managed to get s3sync to upload my test folder to Amazon S3 and can see it in the MWS Managment Console. Downloading the data back to a test folder results in the following error message: root@mybucketname:/var/s3sync# ./week_download.sh s3Prefix backups/weekly localPrefix /var/s3sync/testdown/weekly s3TreeRecurse mybucketname backups/weekly Creating new connection Trying command list_bucket mybucketname prefix backups/weekly max-keys 200 delimiter / with 100 retries le ft Response code: 200 prefix found: / s3TreeRecurse mybucketname backups/weekly / Trying command list_bucket mybucketname prefix backups/weekly/ max-keys 200 delimiter / with 100 retries l eft Response code: 200 S3 item backups/weekly/ s3 node object init. Name: Path:backups/weekly Size:0 Tag:d41d8cd98f00b204e9800998ecf8427e Date:Fri O ct 29 14:21:53 UTC 2010 local node object init. Name: Path:/var/s3sync/testdown/weekly/ Size: Tag: Date: source: dest: Update node s3sync.rb:638:in initialize': No such file or directory - /var/s3sync/testdown/weekly/.s3syncTemp (E rrno::ENOENT) from s3sync.rb:638:inopen' from s3sync.rb:638:in updateFrom' from s3sync.rb:393:inmain' from s3sync.rb:735 I am using the following download script: !/bin/bash script to download local directory upto s3 cd /var/s3sync/ export AWS_ACCESS_KEY_ID=nothing to see here export AWS_SECRET_ACCESS_KEY=nothing to see here export SSL_CERT_DIR=/var/s3sync/certs ruby s3sync.rb -r -v -d --progress --make-dirs mybucket:backups/weekly /var/s3sync/testdown copy and modify line above for each additional folder to be synced Any idea's? Does the download script need to download to the source of Amazon S3 i.e testup folder? Was hoping on the instance of a complete failure and the original folders won't exist that it would just download everything from me. Note: changed my bucket names to "mybucketname" so that it is not public!

  Read the article

• How to know who accessed a file or if a file has 'access' monitor in linux

  - by J L

  I'm a noob and have some questions about viewing who accessed a file. I found there are ways to see if a file was accessed (not modified/changed) through audit subsystem and inotify. However, from what I have read online, according to here: http://www.cyberciti.biz/tips/linux-audit-files-to-see-who-made-changes-to-a-file.html it says to 'watch/monitor' file, I have to set a watch by using command like: # auditctl -w /etc/passwd -p war -k password-file So if I create a new file or directory, do I have to use audit/inotify command to 'set' watch first to 'watch' who accessed the new file? Also is there a way to know if a directory is being 'watched' through audit subsystem or inotify? How/where can I check the log of a file? edit: from further googling, I found this page saying: http://www.kernel.org/doc/man-pages/online/pages/man7/inotify.7.html The inotify API provides no information about the user or process that triggered the inotify event. So I guess this means that I cant figure out which user accessed a file? Only audit subsystem can be used to figure out who accessed a file?

  Read the article

• Can I restore one of my user's profiles in Vista?

  - by Rod

  My youngest daughter uses my 4 year old laptop, which has Windows Vista installed. Somehow she got some Trojan (Vista Internet Security). (I'd love to know how that happened, seeing as how she is a standard user, and I have VIPRE as my AV.) Anyway, I ran a deep anti-virus scan using VIPRE, which identified it. I decided to delete everything that it identified. Now she cannot use anything in her profile. If she tries to bring up the browser, it recycles over and over again a dialog box asking which program to use. If I try to run any program at all, it doesn't know what to do. For example, it is totally lost trying to run the command line. If I bring up Windows Explorer and navigate to Windows\System32 and try to run the command line, or anything at all from there, it goes "Huh?" What in heck has happened?? Is it possible to fix this, and if so, how? As an aside, I can log into my account (my account on that machine is an administrator) and it works fine.

  Read the article

• Is there a way to do a sector level copy/clone from one hard drive to another?

  - by irrational John

  Without going into distracting details, I'm attempting to duplicate the contents of the 500GB drive in my MacBook to another 500GB drive. But this is turning out to be an unexpected hassle because the drive contains both the OS X partition and an NTFS partition with Win 7 via Apple's Boot Camp. With the exception of Clonezilla, the tools I have looked at so far all have some limitation. The Mac tools don't want to deal with the NTFS partition. The Windows tools are totally clueless about either the HFS+ partition and/or the hybrid MBR/GPT Boot Camp partitioning. Clonezilla looked like it would do what I want but apparently I can't figure out how to use it. After doing what I thought was a sector to sector copy I found that only the NTFS partition had been migrated. The others were apparently empty. (And frankly, I'm not positive Clonezilla migrated the partition table correctly either). Note: It takes over 2 hours using SATA to read/write all sectors with these drives. So I'm not up for using trial & error to narrow in on the right combination of Clonezilla options to use. I'm beginning to think that maybe the answer is to boot Linux (probably Ubuntu) and then use some ancient BSD command. Trouble is I don't know what command (or parameters to use) in order to do a sector level copy from one drive to another. As far as I know the drives have the same number of sectors so this should be trivial. Sigh.

  Read the article

• Ubuntu Launcher Items Don't Have Correct Environment Vars under NX

  - by ivarley

  I've got an environment variable issue I'm having trouble resolving. I'm running Ubuntu (Karmic, 9.10) and coming in via NX (NoMachine) on a Mac. I've added several environment variables in my .bashrc file, e.g.: export JAVA_HOME=$HOME/dev/tools/Linux/jdk/jdk1.6.0_16/ Sitting at the machine, this environment variable is available on the command line, as well as for apps I launch from the Main Menu. Coming in over NX, however, the environment variable shows up correctly on the command line, but NOT when I launch things via the launcher. As an example, I created a simple shell script called testpath in my home folder: #!/bin/sh echo $PATH && sleep 5 quit I gave it execute privileges: chmod +x testpath And then I created a launcher item in my Main Menu that simply runs: ./testpath When I'm sitting at the computer, this launcher runs and shows all the stuff I put into the $PATH variable in my .bashrc file (e.g. $JAVA_HOME, etc). But when I come in over NX, it shows a totally different value for the $PATH variable, despite the fact that if I launch a terminal window (still in NX), and type export $PATH, it shows up correctly. I assume this has to do with which files are getting loaded by the windowing system over NX, and that it's some other file. But I have no idea how to fix it. For the record, I also have a .profile file with the following in it: # if running bash if [ -n "$BASH_VERSION" ]; then # include .bashrc if it exists if [ -f "$HOME/.bashrc" ]; then . "$HOME/.bashrc" fi fi

  Read the article

• Amazon EC2 - Free memory

  - by Damo

  We have an amazon ec2 small instance running and over the past few days we noticed that the memory is going down and down. On the small instance, we are running apache and tomcat6 Tomcat is started with the following JVM parameters -Xms32m -Xmx128m -XX:PermSize=128m -XX:MaxPermSize=256m We use nagios to monitor stuff like updates to apply, free disk space and memory. Everything else is behaving as expected but our memory is going down all the time. Our app receives approx half a million hits a day When I shutdown apache and tomcat, and ran free -m, we had only 594mb of memory free out out of the 1.7gb of memory. Not much else is running on the small instance and when running the top command I cannot see where the memory is going. The app we run on tomcat is a grails webapp. Could there be a possibility that there is a memory leak within our application? I read online and folks say that a small amazon instance is perfect for running apach and tomcat. I found a few posts online that showed how to setup apache and tomcat to limit the memory usage and I have already performed those steps. The memory is not being used up as quick but the memory is still decreasing over time. We have other amazone ec2 small instances running grails apps and the memory is fairly standard on those nodes. But they would not be receiving as much traffic Just to add, when I run the top command on the problem server, I cannot see where all the memory is being used Any help with this is greatly appreciated The output of free -m when run on my server is as follows total used free shared buffers cached Mem: 1657 1380 277 0 158 773 -/+ buffers/cache: 447 1209 Swap: 895 0 895 In your opinion, does this look ok? At what stage would the OS give back memory, would it wait to the memory reaches 0% or is this OS dependent?

  Read the article

< Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >