auth basic - Page 439 - Developer IT

Which StackOverflow-style MarkDown (WMD) javascript editor should I use?

- by Edan Maor

Background I'm working on an application which requires user-entered content, and I've decided to use a StackOverflow-style MarkDown editor. After researching this topic for the last few days, I realize there are numerous forks of the base WMD editor, some with a few basic enhancements and some with serious differences from the StackOverflow one. Since this will be the heart of the application, I'd like to start with the best code base I can. I'd be happy if anyone can recommend which one of the many solutions out there best fits my needs. Below is requirements, plus what I've managed to find already. I'm hoping this question will help me decide which version to go with, and maybe help me discover a port out there that's an even better fit for my needs. The requirements for my project Live Preview Multiple editors on the same page (not know how many in advance, since the user can dynamically add another editing box). Ability to extend with extra buttons (I'd like a button to upload a picture, instead of just adding an img url). Ability to dynamically show/hide the edit box (and only see the preview box). Not an absolute must, but I'd prefer to stick as close to StackOverflow's look and feel, since it's well known. Don't know if this matters, but the backend is written in Django. Editors I've looked at Here are a few of the code bases I've looked at, with thoughts. Obviously, I might be missing another solution out there. The derobins version. From what I can tell, this is the official StackOverflow version. Seems like it doesn't support multiple editors on one page. JQuery.MarkEdit. Looks very good, but is pretty different from the StackOverflow version. MooWMD. Looks like the winner right now, but I'm a little concerned since it looks less active/hackable than MarkEdit. The wmd-new version. Not sure, looks like an old codebase without much use. The SocialSite branch. Seems like it's not for public use.

Read the article

Symfony 1.4 Layout footer glitch: Footer div is echoed out with $sf_content

- by Parijat Kalia

I have a very simple Layout for my application. A header, the main content, and a footer. Semantically, they are rendered like this: <body> <div id = "header"> </div> <div id = "content"> </div> <div id = "footer"> </div> </body> The corresponding CSS is very basic as well: #header{ width:100%; min-height:10%; } #center{ width:100%; min-height:80%; } #footer{ width:100%; min-height:10%: } As you would know in the layout page, here is how the content is rendered: <div id= "content"> <?php echo $sf_content; ?> </div> All of the above is very fine and it renders itself as it is supposed to. But there is a glitch with this, the moment i put in <?php echo $sf_content; ?> the footer is included as part of the content and not as a div that is after the #content markup. Essentially, I get this: <div id = "header"></div> <div id = "content> <div id ="symfony_template_to_be_rendered">  </div> <div id = "footer">Footer material </div> </div> As you can see, for some weird reason, the footer moved up along with the symfony content. Clearly this is a glitch because if I remove the php hash $sf_content part from the div tags in my layouts, then the footer renders itself as and where it should be and everything takes up the required dimensions. What's going on here?

Read the article

Minimalistic tools for developer documentation

- by Pekka

I am currently working on a large PHP CMS / Framework and documenting it extensively as I go along. In addition to phpdoc-style inline comments, I need to document XML structures, details on concepts and practices, write HOWTOs and so on. At the moment, I am using simple OpenOffice documents for that, but I'm unhappy with it and looking for a "real" documentation system. So, I am looking for recommendations for robust, minimalistic, easy-to-use documentation software. I have tried a number of Wikis, most prominently Dokuwiki. I like the open-minded approach, the freedom in editing, and the simplicity, but they provide little support in structuring a multi-chapter documentation, and make basic reorganisation tasks very difficult (e.g. moving pages to a different namespace). Working with the plugins is Cumbersome, and they are not really easy to use. Open Source would be a plus but is not a requirement. Thanks for all the suggestions. I have not had time to look into each one in detail. I will be trying Sphinx, especially because it provides so much support for a good structure. I may update this post later when I'm done and report how it worked out. The suggestions Trac's built-in wiki which is great but for my taste provides too little support for keeping a structure - it's perfect though for "normal", smaller size project documentation Markdown my current favourite because of its minimalism, however not sure yet whether maintaining a structure will be easy enough. A Markdown-Based system would of course be very easy to extend, e.g. to look up cross references from the project's code base. Of course it would be great to find something that already has that out of the box. The DocBook format and to edit, the commercial Oxygen XML Editor - a great standard for building documentation, no doubt. Maybe too "technical" for my purposes as I need something to open quickly, write into and go on coding. Still always worth a mention. Sphinx an Open Source, Python based documentation generator, promising structured documentation and extensive cross-referencing. Interesting and will take a look. Confluence a commercial but very affordable Wiki. XWiki, an Open Source playing in Confluence's league with numerous extensions and connectors to Eclipse and Microsoft Office. TiddlyWiki an open-source Wiki.

Read the article

Determining what frequencies correspond to the x axis in aurioTouch sample application

- by eagle

I'm looking at the aurioTouch sample application for the iPhone SDK. It has a basic spectrum analyzer implemented when you choose the "FFT" option. One of the things the app is lacking is X axis labels (i.e. the frequency labels). In the aurioTouchAppDelegate.mm file, in the function - (void)drawOscilloscope at line 652, it has the following code: if (displayMode == aurioTouchDisplayModeOscilloscopeFFT) { if (fftBufferManager->HasNewAudioData()) { if (fftBufferManager->ComputeFFT(l_fftData)) [self setFFTData:l_fftData length:fftBufferManager->GetNumberFrames() / 2]; else hasNewFFTData = NO; } if (hasNewFFTData) { int y, maxY; maxY = drawBufferLen; for (y=0; y<maxY; y++) { CGFloat yFract = (CGFloat)y / (CGFloat)(maxY - 1); CGFloat fftIdx = yFract * ((CGFloat)fftLength); double fftIdx_i, fftIdx_f; fftIdx_f = modf(fftIdx, &fftIdx_i); SInt8 fft_l, fft_r; CGFloat fft_l_fl, fft_r_fl; CGFloat interpVal; fft_l = (fftData[(int)fftIdx_i] & 0xFF000000) >> 24; fft_r = (fftData[(int)fftIdx_i + 1] & 0xFF000000) >> 24; fft_l_fl = (CGFloat)(fft_l + 80) / 64.; fft_r_fl = (CGFloat)(fft_r + 80) / 64.; interpVal = fft_l_fl * (1. - fftIdx_f) + fft_r_fl * fftIdx_f; interpVal = CLAMP(0., interpVal, 1.); drawBuffers[0][y] = (interpVal * 120); } cycleOscilloscopeLines(); } } From my understanding, this part of the code is what is used to decide which magnitude to draw for each frequency in the UI. My question is how can I determine what frequency each iteration (or y value) represents inside the for loop. For example, if I want to know what the magnitude is for 6kHz, I'm thinking of adding a line similar to the following: if (yValueRepresentskHz(y, 6)) NSLog(@"The magnitude for 6kHz is %f", (interpVal * 120)); Please note that although they chose to use the variable name y, from what I understand, it actually represents the x-axis in the visual graph of the spectrum analyzer, and the value of the drawBuffers[0][y] represents the y-axis.

Read the article

do you want try ? [closed]

- by gemxia

Only with time and hard work, that can you get an IT certification. Although there are hundreds of certifications for you to pick from, the basic steps to get certified are the same. The following steps are certain to clear your puzzles about the preparation process of your <. The first step to take is choosing a certification. It is simple but at the same time very important. Make sure to choose the certifications that are respected in your industries. The second step you should take is to evaluate your experience. Find out what skills and experience the IBM certification is expecting. Then, decide what type of training is suitable for you. Preparation books will certainly not make you an expert in subjects you’re not already an expert in. But, for the subject areas you know little or nothing about, a study guide provides you clues and guidance about what the important information from those subjects is when it comes to passing the Examkiller IBM examination exam. Visit certification forums during your 000-M62 certification exam preparation. In this way, you can learn from others’ mistakes and example, meanwhile help your own studies. Achieving your goals without proper training is a sure road to failure. Knowing about a topic and having special expertise in it are completely different. One cannot be an expert in the IT industry without the proper foundation. Taking a training class for Examkiller IBM exam might be a guaranteed way. When the economy dips and budgets get tightened, one of the first things to go from corporate spending is training. There are plenty of courses, boot camps and cram sessions that promise to prepare you for the IBM exam, but they are exceptionally expensive. As much as possible, for your own benefit, you should look for resources that are free. Vendor of IBM offers free resource in their sites. These practice exams are the closest to the real exams. If you think that you have got ready for the exam, you can take the fourth now, which is registering your exam. Even if you have passed your <, yet you can’t relax, since there are still so many certifications ahead. If you have just memorized some questions and answers, excepting a fluke, then, don’t take the IBM test exam, until you really have the experience and skills the certification requires.

Read the article

Why does PostgresQL query performance drop over time, but restored when rebuilding index

- by Jim Rush

According to this page in the manual, indexes don't need to be maintained. However, we are running with a PostgresQL table that has a continuous rate of updates, deletes and inserts that over time (a few days) sees a significant query degradation. If we delete and recreate the index, query performance is restored. We are using out of the box settings. The table in our test is currently starting out empty and grows to half a million rows. It has a fairly large row (lots of text fields). We are search is based of an index, not the primary key (I've confirmed the index is being used, at least under normal conditions) The table is being used as a persistent store for a single process. Using PostgresQL on Windows with a Java client I'm willing to give up insert and update performance to keep up the query performance. We are considering rearchitecting the application so that data is spread across various dynamic tables in a manner that allows us to drop and rebuild indexes periodically without impacting the application. However, as always, there is a time crunch to get this to work and I suspect we are missing something basic in our configuration or usage. We have considered forcing vacuuming and rebuild to run at certain times, but I suspect the locking period for such an action would cause our query to block. This may be an option, but there are some real-time (windows of 3-5 seconds) implications that require other changes in our code. Additional information: Table and index CREATE TABLE icl_contacts ( id bigint NOT NULL, campaignfqname character varying(255) NOT NULL, currentstate character(16) NOT NULL, xmlscheduledtime character(23) NOT NULL, ... 25 or so other fields. Most of them fixed or varying character fiel ... CONSTRAINT icl_contacts_pkey PRIMARY KEY (id) ) WITH (OIDS=FALSE); ALTER TABLE icl_contacts OWNER TO postgres; CREATE INDEX icl_contacts_idx ON icl_contacts USING btree (xmlscheduledtime, currentstate, campaignfqname); Analyze: Limit (cost=0.00..3792.10 rows=750 width=32) (actual time=48.922..59.601 rows=750 loops=1) - Index Scan using icl_contacts_idx on icl_contacts (cost=0.00..934580.47 rows=184841 width=32) (actual time=48.909..55.961 rows=750 loops=1) Index Cond: ((xmlscheduledtime < '2010-05-20T13:00:00.000'::bpchar) AND (currentstate = 'SCHEDULED'::bpchar) AND ((campaignfqname)::text = '.main.ee45692a-6113-43cb-9257-7b6bf65f0c3e'::text)) And, yes, I am aware there there are a variety of things we could do to normalize and improve the design of this table. Some of these options may be available to us. My focus in this question is about understanding how PostgresQL is managing the index and query over time (understand why, not just fix). If it were to be done over or significantly refactored, there would be a lot of changes.

Read the article

Correlated SQL Join Query from multiple tables

- by SooDesuNe

I have two tables like the ones below. I need to find what exchangeRate was in effect at the dateOfPurchase. I've tried some correlated sub queries, but I'm having difficulty getting the correlated record to be used in the sub queries. I expect a solution will need to follow this basic outline: SELECT only the exchangeRates for the applicable countryCode From 1. SELECT the newest exchangeRate less than the dateOfPurchase Fill in the query table with all the fields from 2. and the purchasesTable. My Tables: purchasesTable: > dateOfPurchase | costOfPurchase | countryOfPurchase > 29-March-2010 | 20.00 | EUR > 29-March-2010 | 3000 | JPN > 30-March-2010 | 50.00 | EUR > 30-March-2010 | 3000 | JPN > 30-March-2010 | 2000 | JPN > 31-March-2010 | 100.00 | EUR > 31-March-2010 | 125.00 | EUR > 31-March-2010 | 2000 | JPN > 31-March-2010 | 2400 | JPN costOfPurchase is in whatever the local currency is for a given countryCode exchangeRateTable > effectiveDate | countryCode | exchangeRate > 29-March-2010 | JPN | 90 > 29-March-2010 | EUR | 1.75 > 30-March-2010 | JPN | 92 > 31-March-2010 | JPN | 91 The results of the query that I'm looking for: > dateOfPurchase | costOfPurchase | countryOfPurchase | exchangeRate > 29-March-2010 | 20.00 | EUR | 1.75 > 29-March-2010 | 3000 | JPN | 90 > 30-March-2010 | 50.00 | EUR | 1.75 > 30-March-2010 | 3000 | JPN | 92 > 30-March-2010 | 2000 | JPN | 92 > 31-March-2010 | 100.00 | EUR | 1.75 > 31-March-2010 | 125.00 | EUR | 1.75 > 31-March-2010 | 2000 | JPN | 91 > 31-March-2010 | 2400 | JPN | 91 So for example in the results, the exchange rate, in effect for EUR on 31-March was 1.75. I'm using Access, but a MySQL answer would be fine too. UPDATE: Modification to Allan's answer: SELECT dateOfPurchase, costOfPurchase, countryOfPurchase, exchangeRate FROM purchasesTable p LEFT OUTER JOIN (SELECT e1.exchangeRate, e1.countryCode, e1.effectiveDate, min(e2.effectiveDate) AS enddate FROM exchangeRateTable e1 LEFT OUTER JOIN exchangeRateTable e2 ON e1.effectiveDate < e2.effectiveDate AND e1.countryCode = e2.countryCode GROUP BY e1.exchangeRate, e1.countryCode, e1.effectiveDate) e ON p.dateOfPurchase >= e.effectiveDate AND (p.dateOfPurchase < e.enddate OR e.enddate is null) AND p.countryOfPurchase = e.countryCode I had to make a couple small changes.

Read the article

Tomcat IIS 7 Integration gives 503 errors on all requests.

- by Yvan JANSSENS

Hi, After many attempts to install Tomcat on IIS 7, I finally managed to get it working. At least I think so :-S. I finally got the 500 errors away, by setting the correct permissions. The only thing that doesn't work is ... serving stuff: neither regular stuff (like ASP, HTML files, or directory browsing) or Tomcat things work. Here are my configs: Worker.properties # The workers that your plugins should create and work with # worker.list=worker1 #------ DEFAULT ajp13 WORKER DEFINITION ------------------------------ #--------------------------------------------------------------------- # Defining a worker named ajp13 and of type ajp13 # Note that the name and the type do not have to match. # worker.worker1.port=8009 worker.worker1.host=127.0.0.1 worker.worker1.type=ajp13 URIWorkerMap.properties /|/*=worker1 # Exclude the subdirectory static: !/static|/*=worker1 # Exclude some suffixes: !*.html=worker1 !*.asp=worker1 Server.xml <?xml version='1.0' encoding='utf-8'?>   <Server port="8005" shutdown="SHUTDOWN">  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">    <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" />      <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>  <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">     </Host> </Engine> </Service> </Server> http://localhost:8080 is working, I can view the apps and configure them there... I'm quite new to IIS 7, I used to work with IIS 6. Thanks in advance, Yvan

Read the article

NSStringWithFormat Swizzled to allow missing format numbered args

- by coneybeare

Based on this SO question asked a few hours ago, I have decided to implement a swizzled method that will allow me to take a formatted NSString as the format arg into stringWithFormat, and have it not break when omitting one of the numbered arg references (%1$@, %2$@) I have it working, but this is the first copy, and seeing as this method is going to be potentially called hundreds of thousands of times per app run, I need to bounce this off of some experts to see if this method has any red flags, major performance hits, or optimizations #define NUMARGS(...) (sizeof((int[]){__VA_ARGS__})/sizeof(int)) @implementation NSString (UAFormatOmissions) + (id)uaStringWithFormat:(NSString *)format, ... { if (format != nil) { va_list args; va_start(args, format); // $@ is an ordered variable (%1$@, %2$@...) if ([format rangeOfString:@"$@"].location == NSNotFound) { //call apples method NSString *s = [[[NSString alloc] initWithFormat:format arguments:args] autorelease]; va_end(args); return s; } NSMutableArray *newArgs = (NSMutableArray *)[NSMutableArray arrayWithCapacity:NUMARGS(args)]; id arg = nil; int i = 1; while (arg = va_arg(args, id)) { NSString *f = (NSString *)[NSString stringWithFormat:@"%%%d\$\@", i]; i++; if ([format rangeOfString:f].location == NSNotFound) continue; else [newArgs addObject:arg]; } va_end(args); char *newArgList = (char *)malloc(sizeof(id) * [newArgs count]); [newArgs getObjects:(id *)newArgList]; NSString* result = [[[NSString alloc] initWithFormat:format arguments:newArgList] autorelease]; free(newArgList); return result; } return nil; } The basic algorithm is: search the format string for the %1$@, %2$@ variables by searching for %@ if not found, call the normal stringWithFormat and return else, loop over the args if the format has a position variable (%i$@) for position i, add the arg to the new arg array else, don't add the arg take the new arg array, convert it back into a va_list, and call initWithFormat:arguments: to get the correct string. The idea is that I would run all [NSString stringWithFormat:] calls through this method instead. This might seem unnecessary to many, but click on to the referenced SO question (first line) to see examples of why I need to do this. Ideas? Thoughts? Better implementations? Better Solutions?

Read the article

Explanation of converting exporting an XML document as a relational database using XSLT

- by Yaaqov

I would like to better understand the basic steps needed to a take an XML document like this Breakfast Menu... <?xml version="1.0" encoding="ISO-8859-1"?> <breakfast_menu> <food> <name>Belgian Waffles</name> <price>$5.95</price> <description>two of our famous Belgian Waffles with plenty of real maple syrup</description> <calories>650</calories> </food> <food> <name>Strawberry Belgian Waffles</name> <price>$7.95</price> <description>light Belgian waffles covered with strawberries and whipped cream</description> <calories>900</calories> </food> <food> <name>Berry-Berry Belgian Waffles</name> <price>$8.95</price> <description>light Belgian waffles covered with an assortment of fresh berries and whipped cream</description> <calories>900</calories> </food> <food> <name>French Toast</name> <price>$4.50</price> <description>thick slices made from our homemade sourdough bread</description> <calories>600</calories> </food> <food> <name>Homestyle Breakfast</name> <price>$6.95</price> <description>two eggs, bacon or sausage, toast, and our ever-popular hash browns</description> <calories>950</calories> </food> </breakfast_menu> And "export" it to say, an Access or MySQL database using XSLT, creating two joined tables: Table: breakfast_menu Field: menu_item_id Field: food_id Table: food Field: food_id Field: name Field: price Field: description Field: calories If there are online tutorials on this that you know of, I'd be interesting in learning more, as well. Thanks.

Read the article

Any software for pattern-matching and -rewriting source code?

- by Steven A. Lowe

I have some old software (in a language that's not dead but is dead to me ;-)) that implements a basic pattern-matching and -rewriting system for source code. I am considering resurrecting this code, translating it into a modern language, and open-sourcing the project as a refactoring power-tool. Before I go much further, I want to know if anything like this exists already (my google-fu is fanning air on this tonight). Here's how it works: the pattern-matching part matches source-code patterns spanning multiple lines of code using a template with binding variables, the pattern-rewriting part uses a template to rewrite the matched code, inserting the contents of the bound variables from the matching template matching and rewriting templates are associated (1:1) by a simple (unconditional) rewrite rule the software operates on the abstract syntax tree (AST) of the input application, and outputs a modified AST which can then be regenerated into new source code for example, suppose we find a bunch of while-loops that really should be for-loops. The following template will match the while-loop pattern: Template oldLoopPtrn int @cnt@ = 0; while (@cnt@ < @max@) { … @body@ ++@cnt@; } End_Template while the following template will specify the output rewrite pattern: Template newLoopPtrn for(int @cnt@ = 0; @cnt@ < @max@; @cnt@++) { @body@ } End_Template and a simple rule to associate them Rule oldLoopPtrn --> newLoopPtrn so code that looks like this int i=0; while(i<arrlen) { printf("element %d: %f\n",i,arr[i]); ++i; } gets automatically rewritten to look like this for(int i = 0; i < arrlen; i++) { printf("element %d: %f\n",i,arr[i]); } The closest thing I've seen like this is some of the code-refactoring tools, but they seem to be geared towards interactive rewriting of selected snippets, not wholesale automated changes. I believe that this kind of tool could supercharge refactoring, and would work on multiple languages (even HTML/CSS). I also believe that converting and polishing the code base would be a huge project that I simply cannot do alone in any reasonable amount of time. So, anything like this out there already? If not, any obvious features (besides rewrite-rule conditions) to consider? EDIT: The one feature of this system that I like very much is that the template patterns are fairly obvious and easy to read because they're written in the same language as the target source code, not in some esoteric mutated regex/BNF format.

Read the article

Dumb IE6 resize behaviour - hope it rings some bells with someone

- by Ollie2893

Hi, I'm having no end of fun (sic) with jQuery.tabs. The widget is quite crafty in that it turns basic HTML like so <div> <ul> <li>Tab #1</li> ... </ul> <div for panel #1> </div> <div for panel #2> </div> ... </div> into a cute tabbed dialogue. (It does so by restyling the UL and then toggling the "display" attribute for the panel DIVs to show/not show whatever panel is selected.) Now I found that I can spare myself a lot of trouble in my JS project if I insert a scrollable IFRAME into each panel. One usability problem I'm trying to ameliorate is that when the tabbed panel becomes larger than the browser's window, then the user ends up with too many scrollbars. I am trying to avoid this situation by linking the size of the tabbed panel to that of $(window). That is, I trap and process the resize event on $(window). To make my life bearable, all components are relatively sized. This is also true, in particular, of the IFRAMEs (100% width, 100% height). The only exception are the panel DIVs, which are of fixed height (in px). And this is the only dimension css attribute that I manipulate during my resize action. All of this works a treat in FF and Chrome, but IE6 is doing something rather cute: So long as I do not affect the width of the browser window (but only change its height), only the panel DIV changes in height; the IFRAME contained will not change. As a result of this behaviour, it is not possible to shorten the tabbed panel below the height of the IFRAME. I can lengthen the DIV, yes. But the IFRAME will not fill the panel in that case. All becomes good the moment I make the slightest change to the width of the browser window. In that moment, the IFRAME expands to catch up with the extended DIV or DIV and IFRAME contract in tandem. Bizarre. I inserted useless CSS instructions like "position: relative" and "zoom: 1". Also nudged the display with "display: block". No joy so far. Any ideas? Thanks.

Read the article

UIViewController not oreintating. Methods not called

- by capple

Greetings, This question does seem to be an ongoing saga in the world of iphone SDK... so heres my contribution... Had two separate projects from the same template... one semi-works, the other not at all... Please let me explain my steps... used this basic GL ES template //iphonedevelopment.blogspot.com/2008/12/opengl-project-template-for-xcode.html had to sort out some of the 'Release' configuration but otherwises has eveything I need to add orientation to a GL ES project. One my first project, did my stuff, then added these methods.... -(BOOL)shouldAutoRotateToInterfaceOrientation ..... -(void)willRotateToInterfaceOrientation .... -(void)didRotateFromInterfaceOrientation .... -(void)willAnimateRotationToInterfaceOrientation .... And understand what they do (or are trying to do in my case), the (BOOL)should... gets called once when the view controller is created, and returns 'YES'. But after that none of the other methods are called! So I started from scratch with a blank template (GL ES one from above)...and added minimum to support auto rotation. But this time none of the methods get called! So I investigated .... //developer.apple.com/iphone/library/qa/qa2010/qa1688.html as it said, I added the GLViewController.view first, then added the GLview as subviews of the application delegate. Nothing! Then found this //www.iphonedevsdk.com/forum/iphone-sdk-development/44993-how-determine-ipad-launch-orientation.html which states to enable orientation notifications [[UIDevice currentDevice] beginGeneratingDeviceOrientationNotifications]; and then subsequently disable them in the view controller... makes sense...did it, nothing... I think the notifications might be on by default though, since I didn't need to enable them in the first project, yet it still try to verify a orientation (i.e (BOOL)shouldAutoRotate... )... If any one could help me out it would be greatly appreciated as this issue is driving me insane. Thanks in advance. The code can be found here ... http://rapidshare.com/files/392053688/autoRotation.zip N.B These projects avoid nib/xib resources, would like to keep it that way if possible. P.S iPad device not out where I am so I cannot test on a device yet. Would be nice for it to work on the simulator.

Read the article

MVC 2 AntiForgeryToken - Why symmetric encryption + IPrinciple?

- by Brad R

We recently updated our solution to MVC 2, and this has updated the way that the AntiForgeryToken works. Unfortunately this does not fit with our AJAX framework any more. The problem is that MVC 2 now uses symmetric encryption to encode some properties about the user, including the user's Name property (from IPrincipal). We are able to securely register a new user using AJAX, after which subsequent AJAX calls will be invalid as the anti forgery token will change when the user has been granted a new principal. There are also other cases when this may happen, such as a user updating their name etc. My main question is why does MVC 2 even bother using symmetric encryption? Any then why does it care about the user name property on the principal? If my understanding is correct then any random shared secret will do. The basic principle is that the user will be sent a cookie with some specific data (HttpOnly!). This cookie is then required to match a form variable sent back with each request that may have side effects (POST's usually). Since this is only meant to protect from cross site attacks it is easy to craft up a response that would easily pass the test, but only if you had full access to the cookie. Since a cross site attacker is not going to have access to your user cookies you are protected. By using symmetric encryption, what is the advantage in checking the contents of the cookie? That is, if I already have sent an HttpOnly cookie the attacker cannot override it (unless a browser has a major security issue), so why do I then need to check it again? After having a think about it it appears to be one of those 'added layer of security' cases - but if your first line of defence has fallen (HttpOnly) then the attacker is going to get past the second layer anyway as they have full access to the users cookie collection, and could just impersonate them directly, instead of using an indirect XSS/CSRF attack. Of course I could be missing a major issue, but I haven't found it yet. If there are some obvious or subtle issues at play here then I would like to be aware of them.

Read the article

DNS Problems (NIGHTMARES!) with BIND and Virtualmin

- by Nyxynyx

I have a webserver (Ubuntu 12.04 with LAMP) using Virtualmin / Webmin. Because I just moved from a Cpanel system, I am having a nightmare configuring the DNS! Using intoDNS.com, the failed reports are: Mismatched NS records WARNING: One or more of your nameservers did not return any of your NS records. DNS servers responded ERROR: One or more of your nameservers did not respond: The ones that did not respond are: 123.123.123.123 213.251.188.141x Multiple Nameservers ERROR: Looks like you have less than 2 nameservers. According to RFC2182 section 5 you must have at least 3 nameservers, and no more than 7. Having 2 nameservers is also ok by me. Missing nameservers reported by your nameserver You should already know that your NS records at your nameservers are missing, so here it is again: ns1.mydomain.com. sdns2.ovh.net. SOA record No valid SOA record came back! MX Records WWW A Record ERROR: I could not get any A records for www.mydomain.com! Step-by-Step of my Attempt In my domain registrar (Namecheap), I registered ns1.mydomain.com as a nameserver, pointing to the IP address of my web server which is running bind9. The domain is setup with DNS ns1.mydomain.com and sdns2.ovh.net. sdns2.ovh.net is a secondary DNS server (SLAVE and pointing mydomain.com to the IP address of my web server) Webserver domain: mydomain.com Webserver hostname: ns4000000.ip-123-123-123.net Webserver IP: 123.123.123.123 Under Virtualmin, I edited the default Virtual server template, BIND DNS records for new domains: ns1.mydomain.com Master DNS server hostname: ns1.mydomain.com Next I created a Virtual server using that server template. This is what I've done but its still not working! Any ideas? I've been stuck for days, thank you for all your help! service bind9 status * bind9 is running lsof -i :53 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME named 6966 bind 20u IPv6 338583 0t0 TCP *:domain (LISTEN) named 6966 bind 21u IPv4 338588 0t0 TCP localhost.localdomain:domain (LISTEN) named 6966 bind 22u IPv4 338590 0t0 TCP ns4000000.ip-123-123-123.net:domain (LISTEN) named 6966 bind 512u IPv6 338582 0t0 UDP *:domain named 6966 bind 513u IPv4 338587 0t0 UDP localhost.localdomain:domain named 6966 bind 514u IPv4 338589 0t0 UDP ns4000000.ip-123-123-123.net:domain /etc/resolv.con (Not sure how 213.186.33.99 got here) nameserver 127.0.0.1 nameserver 213.186.33.99 search ovh.net host 123.123.123.123 (my web server's IP) 13.60.245.198.in-addr.arpa domain name pointer ns4000000.ip-123-123-123.net. nslookup 213.186.33.99 Server: 127.0.0.1 Address: 127.0.0.1#53 Non-authoritative answer: 99.33.186.213.in-addr.arpa name = cdns.ovh.net. Authoritative answers can be found from: 33.186.213.in-addr.arpa nameserver = ns.ovh.net. 33.186.213.in-addr.arpa nameserver = dns.ovh.net. nslookup ns1.mydomain.com ;; Got SERVFAIL reply from 127.0.0.1, trying next server ;; connection timed out; no servers could be reached nslookup ns2.mydomain.com ;; Got SERVFAIL reply from 127.0.0.1, trying next server ;; connection timed out; no servers could be reached nslookup www.mydomain.com ;; Got SERVFAIL reply from 127.0.0.1, trying next server ;; connection timed out; no servers could be reached dig mydomain.com ; <<>> DiG 9.8.1-P1 <<>> mydomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 43540 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;mydomain.com. IN A ;; Query time: 0 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 11 11:30:09 2012 ;; MSG SIZE rcvd: 30 dig ns1.mydomain.com ; <<>> DiG 9.8.1-P1 <<>> ns1.mydomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 31254 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ns1.mydomain.com. IN A ;; Query time: 0 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 11 11:30:16 2012 ;; MSG SIZE rcvd: 34 /etc/bind/named.conf include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; /etc/bind/named.conf.default-zones zone "." { type hint; file "/etc/bind/db.root"; }; zone "localhost" { type master; file "/etc/bind/db.local"; }; zone "127.in-addr.arpa" { type master; file "/etc/bind/db.127"; }; zone "0.in-addr.arpa" { type master; file "/etc/bind/db.0"; }; zone "255.in-addr.arpa" { type master; file "/etc/bind/db.255"; }; /etc/bind/named.conf.local zone "mydomain.com" { type master; file "/var/lib/bind/mydomain.com.hosts"; allow-transfer { 127.0.0.1; localnets; }; }; /etc/bind/named.conf.options options { directory "/var/cache/bind"; dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; // allow-recursion { 127.0.0.1; }; // transfer-source; }; named-checkconf -z dns_master_load: /var/lib/bind/mydomain.com.hosts:21: unexpected end of line dns_master_load: /var/lib/bind/mydomain.com.hosts:20: unexpected end of input /var/lib/bind/mydomain.com.hosts: file does not end with newline zone mydomain.com/IN: loading from master file /var/lib/bind/mydomain.com.hosts failed: unexpected end of input zone mydomain.com/IN: not loaded due to errors. _default/mydomain.com/IN: unexpected end of input zone localhost/IN: loaded serial 2 zone 127.in-addr.arpa/IN: loaded serial 1 zone 0.in-addr.arpa/IN: loaded serial 1 zone 255.in-addr.arpa/IN: loaded serial 1 iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:20000 ACCEPT tcp -- anywhere anywhere tcp dpt:webmin ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:imaps ACCEPT tcp -- anywhere anywhere tcp dpt:imap2 ACCEPT tcp -- anywhere anywhere tcp dpt:pop3s ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:ftp-data ACCEPT tcp -- anywhere anywhere tcp dpt:ftp ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:submission ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

Read the article

Why does UIWebKit throw a structuralComplexityContribution exception?

- by Axeva

I've got a simple UIWebView in my iPhone app that's loading a XHTML document with some SGV embeded. This all works find on the desktop version of Safari, but it crashes in a UIWebView. Here is the Objective C: NSString *path = [[NSBundle mainBundle] pathForResource:@"test" ofType:@"html"]; NSData *fileData = [NSData dataWithContentsOfFile: path]; [svgView loadData: fileData MIMEType: @"text/xml" textEncodingName: @"UTF-8" baseURL: [NSURL fileURLWithPath: path]]; I also tried a MIMEType of application/xhtml+xml, but it didn't help. Here is the HTML: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>XTech SVG Demo</title> </head> <body> <svg xmlns="http://www.w3.org/2000/svg"> <g style="fill-opacity:0.7;"> <circle cx="6.5cm" cy="2cm" r="100" style="fill:red; stroke:black; stroke-width:0.1cm" transform="translate(0,50)" /> <circle cx="6.5cm" cy="2cm" r="100" style="fill:blue; stroke:black; stroke-width:0.1cm" transform="translate(70,150)" /> <circle cx="6.5cm" cy="2cm" r="100" style="fill:green; stroke:black; stroke-width:0.1cm" transform="translate(-70,150)"/> </g> </svg> </body> </html> All very basic stuff. When it loads on the iPhone, however, it crashes with this error: 2010-03-31 10:37:10.252 ColorDoodle[2014:20b] -[DOMElement structuralComplexityContribution]: unrecognized selector sent to instance 0x3e51b60 2010-03-31 10:37:10.253 ColorDoodle[2014:20b] Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: ' -[DOMElement structuralComplexityContribution]: unrecognized selector sent to instance 0x3e51b60' Any idea why? Is this a bug in the rendering engine of the UIWebView? I don't see anything too odd here. * Updated * There is definitely something screwy going on here. If I add this bit of code just inside the tag, it works fine: <form> </form> Take that code back out, and it crashes again.

Read the article

Good Secure Backups Developers at Home

- by slashmais

What is a good, secure, method to do backups, for programmers who do research & development at home and cannot afford to lose any work? Conditions: The backups must ALWAYS be within reasonably easy reach. Internet connection cannot be guaranteed to be always available. The solution must be either FREE or priced within reason, and subject to 2 above. Status Report This is for now only considering free options. The following open-source projects are suggested in the answers (here & elsewhere): BackupPC is a high-performance, enterprise-grade system for backing up Linux, WinXX and MacOSX PCs and laptops to a server's disk. Storebackup is a backup utility that stores files on other disks. mybackware: These scripts were developed to create SQL dump files for basic disaster recovery of small MySQL installations. Bacula is [...] to manage backup, recovery, and verification of computer data across a network of computers of different kinds. In technical terms, it is a network based backup program. AutoDL 2 and Sec-Bk: AutoDL 2 is a scalable transport independant automated file transfer system. It is suitable for uploading files from a staging server to every server on a production server farm [...] Sec-Bk is a set of simple utilities to securely back up files to a remote location, even a public storage location. rsnapshot is a filesystem snapshot utility for making backups of local and remote systems. rbme: Using rsync for backups [...] you get perpetual incremental backups that appear as full backups (for each day) and thus allow easy restore or further copying to tape etc. Duplicity backs directories by producing encrypted tar-format volumes and uploading them to a remote or local file server. [...] uses librsync, [for] incremental archives Other Possibilities: Using a Distributed Version Control System (DVCS) such as Git(/Easy Git), Bazaar, Mercurial answers the need to have the backup available locally. Use free online storage space as a remote backup, e.g.: compress your work/backup directory and mail it to your gmail account. Strategies See crazyscot's answer

Read the article

LINQ InsertOnSubmit Required Fields needed for debugging

- by Derek Hunziker

Hi All, I've been using the ADO.NET Strogly-Typed DataSet model for about 2 years now for handling CRUD and stored procedure executions. This past year I built my first MVC app and I really enjoyed the ease and flexibility of LINQ. Perhaps the biggest selling point for me was that with LINQ I didn't have to create "Insert" stored procedures that would return the SCOPE_IDENTITY anymore (The auto-generated insert statements in the DataSet model were not capable of this without modification). Currently, I'm using LINQ with ASP.NET 3.5 WebForms. My inserts are looking like this: ProductsDataContext dc = new ProductsDataContext(); product p = new product { Title = "New Product", Price = 59.99, Archived = false }; dc.products.InsertOnSubmit(p); dc.SubmitChanges(); int productId = p.Id; So, this product example is pretty basic, right, and in the future, I'll probably be adding more fields to the database such as "InStock", "Quantity", etc... The way I understand it, I will need to add those fields to the database table and then delete and re-add the tables to the LINQ to SQL Class design view in order to refresh the DataContext. Does that sound right? The problem is that any new fields that are non-null are NOT caught by the ASP.NET build processes. For example, if I added a non-null field of "Quantity" to the database, the code above would still build. In the DataSet model, the stored procedure method would accept a certain amount of parameters and would warn me that my Insert would fail if I didn't include a quantity value. The same goes for LINQ stored procedure methods, however, to my knowledge, LINQ doesn't offer a way to auto generate the insert statements and that means I'm back to where I started. The bottom line is if I used insert statements like the one above and I add a non-null field to my database, it would break my app in about 10-20 places and there would be no way for me to detect it. Is my only option to do a solution-side search for the keyword "products.InsertOnSubmit" and make sure the new field is getting assigned? Is there a better way? Thanks!

Read the article

PHP fopen returning null on files that work fine with include and get_file_contents

- by brad allred

Hi, I have XAMPP installed on a windows 2000 server. everything is working great except the PHP fopen function. I can neither create nor open files with it. the strange thing is that i can include/require/file_get_contents/other file related functions; also fopen does not generate any errors or notices it just returns NULL. I have gone as far as to grant full control of the file and all enclosing folders to everybody but i still get NULL instead of a file pointer. I have tried this on php 5.2.9, 5.2.13, and 5.3.1 with the same effect. i have gone through the php.ini file looking for something that is breaking it; i have even tried deleting and using the basic ini file from a linux box where fopen is working and still nothing. I know i have to restart apache after changing my ini and all that and have been (I have even restarted the server) so thats not it. I am at this poing assuming it is an apache configuration issue somehow, tomorrow im going to run a test through php-cli to make sure. I really don't want to bruise my head anymore over this can some apache/php wizard come to my aid? Hi guys, thanks for the responses. you are right is is not any config problem. the problem has to be with one of my dlls or one of my included files. I just tried the same code that isn't working in a new file without any include and i disabled my custom libraries and it worked. for the record here is what I was doing that wasn't working: $test_file = 'c:\\test.csv';//everybody has full control. is very large. if(file_exists($test_file) && is_readable($test_file)){ $fp = fopen($test_file, 'r'); echo var_export($fp, true);//outputs NULL. on my linux box this is a number. if($fp !== false){ //do the work fread($fp, 10);//throws the error that $fp is not a valid file handle } } something that i am including must be breaking fopen somehow. works as expected in new file with no includes.

Read the article

What is the best way to archive data in a relational database?

- by GenericTypeTea

I have a bit of an issue with a particular aspect of a program I'm working on. I need the ability to archive (fix) a table so that a change anywhere in the system will not affect the results it returns. This is the basic structure of what I need to fix: Recipe --> Recipe (as sub recipe) Recipe --> Ingredients So, if I fix a Recipe, I need to ensure all the sub recipes (including all the sub recipes sub recipes and so forth) are fixed and all its ingredients are fixed. The problem is that the sub recipe and ingredients still need to be modifiable as they are used by other recipes that are not fixed. I came up with a solution whereby I serialize (with protobuf-net) a master object that deals with the recipe and all the sub recipes and ingredients and save the archive data to a table like follows: Archive{ ReferenceId, (i.e. RecipeId) ReferenceTypeId, (i.e. Recipe) ArchiveData varbinary(max) } Now, this works great and is almost perfect... however I totally forgot (I'd love to blame the agile development mentally, however this was just short sighted) that this information needs to be reported on. As far as I'm aware I can't think how I could inflate the serialized data back into my Recipe Object and use it in a Report. I'm using the standard SQL 2005 report services at the moment. Alternatively, I guess I could do the following: Duplicate every table and tag the word "Archive" on the end of the table name. This would then give me an area of specific archive data... but ignoring my simplified example, there'd actually be about 15 tables duplicated. Add a nullable, non-foreign key property called "CopiedFromId" to every table that contains fixed data and duplicate every record that the recipe (and all it's sub recipes and all their sub recipes) touches. Create some sort of denormalised structure that could be restored from at a later date to the original, unfixed recipe. Although I think this would be like option 1 and involve a lot of extra tables. Anyway, I'm at a total loss and do not like any of the ideas particularly. Can anyone please advise the best course of action? EDIT: Or 4) Create tables specific to what the report requires and populate them with the data when the user clicks the report button? This would cause about 4 extra tables for the report in question.

Read the article

Using perl to parse a file and insert specific values into a database

- by Sean

Disclaimer: I'm a newbie at scripting in perl, this is partially a learning exercise (but still a project for work). Also, I have a much stronger grasp on shell scripting, so my examples will likely be formatted in that mindset (but I would like to create them in perl). Sorry in advance for my verbosity, I want to make sure I am at least marginally clear in getting my point across I have a text file (a reference guide) that is a Word document converted to text then swapped from Windows to UNIX format in Notepad++. The file is uniform in that each section of the file had the same fields/formatting/tables. What I have planned to do, in a basic way is grab each section, keyed by unique batch job names and place all of the values into a database (or maybe just an excel file) so all the fields can be searched/edited for each job much easier than in the word file and possibly create a web interface later on. So what I want to do is grab each section by doing something like: sed -n '/job_name_1_regex/,/job_name_2_regex/' file.txt --how would this be formatted within a perl script? (grab the section in total, then break it down further from there) To read the file in the script I have open FORMAT_FILE, 'test_format.txt'; and then use foreach $line (<FORMAT_FILE>) to parse the file line by line. --is there a better way? My next problem is that since I converted from a word doc with tables, which looks like: Table Heading 1 Table Heading 2 Heading 1/Value 1 Heading 2/Value 1 Heading 1/Value 2 Heading 2/Value 2 but the text file it looks like: Table Heading 1 Table Heading 2Heading 1/Value 1Heading 1/Value 2Heading 2/Value 1Heading 2/Value 2 So I want to have "Heading 1" and "Heading 2" as a columns name and then put the respective values there. I just am not sure how to get the values in relation to the heading from the text file. The values of Heading 1 will always be the line number of Heading 1 plus 2 (Heading 1, Heading 2, Values for heading 1). I know this can be done in awk/sed pretty easily, just not sure how to address it inside a perl script. After I have all the right values and such, linking it up to a database may be an issue as well, I haven't started looking at the way perl interacts with DBs yet. Sorry if this is a bit scatterbrained...it's still not fully formed in my head.

Read the article

NSString stringWithFormat swizzled to allow missing format numbered args

- by coneybeare

Based on this SO question asked a few hours ago, I have decided to implement a swizzled method that will allow me to take a formatted NSString as the format arg into stringWithFormat, and have it not break when omitting one of the numbered arg references (%1$@, %2$@) I have it working, but this is the first copy, and seeing as this method is going to be potentially called hundreds of thousands of times per app run, I need to bounce this off of some experts to see if this method has any red flags, major performance hits, or optimizations #define NUMARGS(...) (sizeof((int[]){__VA_ARGS__})/sizeof(int)) @implementation NSString (UAFormatOmissions) + (id)uaStringWithFormat:(NSString *)format, ... { if (format != nil) { va_list args; va_start(args, format); // $@ is an ordered variable (%1$@, %2$@...) if ([format rangeOfString:@"$@"].location == NSNotFound) { //call apples method NSString *s = [[[NSString alloc] initWithFormat:format arguments:args] autorelease]; va_end(args); return s; } NSMutableArray *newArgs = (NSMutableArray *)[NSMutableArray arrayWithCapacity:NUMARGS(args)]; id arg = nil; int i = 1; while (arg = va_arg(args, id)) { NSString *f = (NSString *)[NSString stringWithFormat:@"%%%d\$\@", i]; i++; if ([format rangeOfString:f].location == NSNotFound) continue; else [newArgs addObject:arg]; } va_end(args); char *newArgList = (char *)malloc(sizeof(id) * [newArgs count]); [newArgs getObjects:(id *)newArgList]; NSString* result = [[[NSString alloc] initWithFormat:format arguments:newArgList] autorelease]; free(newArgList); return result; } return nil; } The basic algorithm is: search the format string for the %1$@, %2$@ variables by searching for %@ if not found, call the normal stringWithFormat and return else, loop over the args if the format has a position variable (%i$@) for position i, add the arg to the new arg array else, don't add the arg take the new arg array, convert it back into a va_list, and call initWithFormat:arguments: to get the correct string. The idea is that I would run all [NSString stringWithFormat:] calls through this method instead. This might seem unnecessary to many, but click on to the referenced SO question (first line) to see examples of why I need to do this. Ideas? Thoughts? Better implementations? Better Solutions?

Read the article

N2 CMS SlidingCurtain control is not visible

- by Carl Raymond

I just set up a new N2 site by starting with the MVC 2 Web Application template in Visual Studio, then following the directions in N2 CMS Developer Documentation in the section Integrating with Existing ASP.NET MVC Application. I have the basic site running now, but with one problem: the sliding curtain widget that holds the administrative controls is not visible in the upper right corner (when logged in, of course). I can make it visible the hard way by using Firebug to locate it in the DOM, and then disabling a couple of the CSS positioning elements. Once I do that, it seems to work normally. After I open it that way, I can click the various controls, or close it up (and I see the animation). But then it's off screen again. My master page has the sliding curtain just inside the <body> tag: <body> <n2:SlidingCurtain runat="server"> <n2:ControlPanel runat="server" /> </n2:SlidingCurtain> ... The site.css file generated in the base MVC site doesn't seem to do any positioning that would affect this. Firebug shows that right after by <body> tag, I have this: <div class="sc" id="SC" style="top: -2px; left: -574px;"><div class="scContent"> .... The style for <div class="sc" ...> is element.style { left:-574px; top:-2px; } .sc { background:#FFFFFF none repeat-x scroll 0 0; border-color:#CCCCBB; border-style:none solid solid none; border-width:1px; left:-200px; position:fixed; top:-200px; z-index:990; } If I disable both top: and both left: rules, the widget appears.

Read the article

VS2008: File creation fails randomly in unit testing?

- by Tim

I'm working on implementing a reasonably simple XML serializer/deserializer (log file parser) application in C# .NET with VS 2008. I have about 50 unit tests right now for various parts of the code (mostly for the various serialization operations), and some of them seem to be failing mostly at random when they deal with file I/O. The way the tests are structured is that in the test setup method, I create a new empty file at a certain predetermined location, and close the stream I get back. Then I run some basic tests on the file (varying by what exactly is under test). In the cleanup method, I delete the file again. A large portion (usually 30 or more, though the number varies run to run) of my unit tests will fail at the initialize method, claiming they can't access the file I'm trying to create. I can't pin down the exact reason, since a test that will work one run fails the next; they all succeed when run individually. What's the problem here? Why can't I access this file across multiple unit tests? Relevant methods for a unit test that will fail some of the time: [TestInitialize()] public void LogFileTestInitialize() { this.testFolder = System.Environment.GetFolderPath( System.Environment.SpecialFolder.LocalApplicationData ); this.testPath = this.testFolder + "\\empty.lfp"; System.IO.File.Create(this.testPath); } [TestMethod()] public void LogFileConstructorTest() { string filePath = this.testPath; LogFile target = new LogFile(filePath); Assert.AreNotEqual(null, target); Assert.AreEqual(this.testPath, target.filePath); Assert.AreEqual("empty.lfp", target.fileName); Assert.AreEqual(this.testFolder + "\\empty.lfp.lfpdat", target.metaPath); } [TestCleanup()] public void LogFileTestCleanup() { System.IO.File.Delete(this.testPath); } And the LogFile() constructor: public LogFile(String filePath) { this.entries = new List<Entry>(); this.filePath = filePath; this.metaPath = filePath + ".lfpdat"; this.fileName = filePath.Substring(filePath.LastIndexOf("\\") + 1); } The precise error message: Initialization method LogFileParserTester.LogFileTest.LogFileTestInitialize threw exception. System.IO.IOException: System.IO.IOException: The process cannot access the file 'C:\Users\<user>\AppData\Local\empty.lfp' because it is being used by another process..

Read the article

error while soap request call

- by Jayshree

Hello. I am trying to make a soap call. Its a very basic call wit Welcome User output. The return value is in xml format. and i am getting the following error. can anyone plz tell me what this error means. The following code shows the soap request and post request that i have made NSString *soapMessage = [NSString stringWithFormat: @"<?xml version=\"1.0\" encoding=\"utf-8\"?>\n" "<soap:Envelope xmlns:xsi=\"http://www.w3.org/2001/XMLSchema-instance\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\" xmlns:soap=\"http://schemas.xmlsoap.org/soap/envelope/\">\n" "<soap:Body>\n" "<WelcomeXML xmlns=\"http://qa2.alliancetek.com/phpwebservice/index.php\">\n" "<name>" "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n" "<message>\n" "<name>Hitesh</name>\n" "</message>\n" "</name>" "</WelcomeXML>\n" "</soap:Body>\n" "</soap:Envelope>\n"]; NSLog(@"%@",soapMessage); NSURL *url = [NSURL URLWithString:@"http://qa2.alliancetek.com/phpwebservice/index.php"]; NSMutableURLRequest *theRequest = [NSMutableURLRequest requestWithURL:url]; NSString *msgLength = [NSString stringWithFormat:@"%d", [soapMessage length]]; [theRequest addValue: @"text/xml; charset=utf-8" forHTTPHeaderField:@"Content-Type"]; [theRequest addValue: @"http://qa2.alliancetek.com/phpwebservice/index.php/WelcomeXML" forHTTPHeaderField:@"SOAPAction"]; [theRequest addValue: msgLength forHTTPHeaderField:@"Content-Length"]; [theRequest setHTTPMethod:@"POST"]; [theRequest setHTTPBody: [soapMessage dataUsingEncoding:NSUTF8StringEncoding]]; Following is the Error that i am getting : <?xml version="1.0" encoding="ISO-8859-1"?><SOAP-ENV:Envelope SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"> <SOAP-ENV:Body><SOAP-ENV:Fault><faultcode xsi:type="xsd:string">SOAP-ENV:Client</faultcode><faultactor xsi:type="xsd:string"></faultactor><faultstring xsi:type="xsd:string">error in msg parsing: XML error parsing SOAP payload on line 5: Reserved XML Name</faultstring><detail xsi:type="xsd:string"></detail></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope> plz help me. I have wasted 2 days on a simple code like this.

Search Results

Search found 12104 results on 485 pages for 'auth basic'.

Page 439/485 | < Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446 | Next Page >

- by Edan Maor

- by Parijat Kalia

- by Pekka

- by eagle

- by gemxia

- by Jim Rush

- by SooDesuNe

- by Yvan JANSSENS

- by coneybeare

- by Yaaqov

- by Steven A. Lowe

- by Ollie2893

- by capple

- by Brad R

- by Nyxynyx

- by Axeva

- by slashmais

- by Derek Hunziker

- by brad allred

- by GenericTypeTea

- by Sean

- by coneybeare

- by Carl Raymond

- by Tim

- by Jayshree

< Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446 | Next Page >