Search Results

Search found 2316 results on 93 pages for 'credentials'.

Page 44/93 | < Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >

• Is it safe to use S3 over HTTP from EC2, as opposed to HTTPS

  - by Marc

  I found that there is a fair deal of overhead when uploading a lot of small files to S3. Some of this overhead comes from SSL itself. How safe is it to talk to S3 without SSL when running in EC2? From the awesome comments below, here are some clarifications: this is NOT a question about HTTPS versus HTTP or the sensitivity of my data. I'm trying to get a feeling for the networking and protocol particularities of EC2 and S3. For example Are we guaranteed to be passing through only the AWS network when communicating from EC2 to S3 Can other AWS users (apart from staff) sniff my communications between EC2 and S3 Is authentication on their api done on every call, and thus credentials are passed on every call? Or is there some kind of authenticated session. I am using the jets3t lib. Feedback from people with some AWS experience would be appreciated. Thanks Marc

  Read the article

• Digest authentication not working: endless cycles of asking for user/pass

  - by bcmcfc

  I'm trying to setup my SVN repository for access remotely. In doing so I have some settings under Apache's dav_svn.conf file. When navigating to hostname/svn, or using Tortoise to do the same it prompts for the user name and password as expected. However, when entering the correct user name and pass that were set in the password file linked to under AuthUserFile it just asks for the credentials again. I think I'm probably missing something simple? The server is running Ubuntu Server 9.10. Accessing SVN remotely does currently work if the authentication lines of dav_svn.conf are commented out. These are the contents of the dav_svn.conf file: <Location /svn> DAV svn SVNPath /home/svn/repo AuthType Digest AuthName "Subversion Repository" AuthDigestDomain /svn/ AuthUserFile /etc/svn_authfile Require valid-user </Location>

  Read the article

• How to start Windows Explorer as domain administrator [closed]

  - by Otiel

  Possible Duplicate: How do you run windows explorer as a different user? Is it possible to start a Windows Explorer with the rights of another domain user? I tried to do the following to start a Windows Explorer on my computer as my domain Administrator, but without success: Right click on C:\Windows\explorer.exe to select Run as different user, Enter the domain administrator credentials: Domain\Administrator ************ The windows explorer session only opens with my current user rights (Domain\me). The reason behind my question is that I want to change some folder rights on a domain shared disk and I need the Domain\Administrator user rights to do it. Usually, I do it by login as Domain\Administrator on the server hosting the shared disk but I would like to be able to do it from my PC, logged as my current login (Domain\me). EDIT As seen in the linked posts, it is not possible anymore on Windows Vista or 7. On Windows XP, the solution is to do: runas /user:domain\username "explorer /separate"

  Read the article

• Win7 to Win7 Remote Desktop Not working, Xp to 7 working fine

  - by vlad b.

  Hello, I have a small home network and recently i tried to enable remote desktop for one of the pc's. I have a mix of Windows 7, Windows Vista and Xp runing alongside ubuntu, centos and others (some virtual, some real). I have a few Windows 7 pc`s that can be connected to using remote desktop from inside and outside the network (port redirects on routers, etc, etc) and some Xp ones. The trouble is when i tried to do the same thing to a Win7 laptop i discovered i can't connect to it from another win7 pc inside the home network. To sum it up Working: xp -- win7 not working: win7 -- win7 What i tried - disable and enable remote desktop (my computer - remote settings) - removing and adding users to the remote settings window - adding a new user to the machine, administrator or 'normal' user - checking the firewall settings on the machine and set 'allow' to remote desktop for both 'home/work' and 'public'networks Any tips on what should i do next? It displays ' .. secure connection' and after that the window with 'Your security credentials did not work' and it lets me try again with another user/password..

  Read the article

• Setting Mercurial with Active Directory authentication and authorisation

  - by jbx

  I am evaluating the possibilities of moving my organisation to Mercurial, however I am stumbling on 2 basic requirements which I can't find proper pointers to. How do I set up Mercurial's central repository to authenticate users with the central active directory and only allow them to push or pull if they have the right credentials? How do I set up a Mercurial project repository to only allow users pertaining to a specific group to push / pull source code? We need this to have per-project authorisation. On which HTTP servers (IIS or Apache etc.) are the above 2 requirements supported? Apologies if I am asking something obvious or if I am missing something fundamental about how authentication and authorisation works. Thanks.

  Read the article

• Can't log in via SSH to any accounts set to use /bin/bash as a default shell

  - by Gui Ambros

  I'm trying to install bash as the default shell on a ARM Linux running on an embedded device (Synology DS212+ NAS). But there's something really wrong, and I can't figure out what it is. Symptoms: 1) Root has /bin/bash as default shell, and can log in normally via SSH: $ grep root /etc/passwd root:x:0:0:root:/root:/bin/bash $ ssh root@NAS root@NAS's password: Last login: Sun Dec 16 14:06:56 2012 from desktop # 2) joeuser has /bin/bash as default shell, and receives "Permission denied" when trying to log in via SSH: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/bash $ ssh joeuser@localhost joeuser@NAS's password: Last login: Sun Dec 16 14:07:22 2012 from desktop Permission denied, please try again. Connection to localhost closed. 3) changing joeuser's shell back to /bin/sh: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/sh $ ssh joeuser@localhost Last login: Sun Dec 16 15:50:52 2012 from localhost $ To make things even more strange, I can log in as joeuser using /bin/bash using the serial console (!). Also a su - joeuser as root works fine, so the bash binary itself is working fine. In an act of despair, I changed joeuser's uid to 0 on /etc/passwd, but also didn't work, so it doesn't seem to be anything permission related. Seems that bash is doing some extra checking that sshd didn't like, and blocking the connections for non-root users. Maybe some sort of sanity checking - or terminal emulation - that is triggering the SIGCHLD, but only when called via ssh. I already went through every single item on sshd_config, and also put SSHD in debug mode, but didn't find anything strange. Here's my /etc/ssh/sshd_config: LogLevel DEBUG LoginGraceTime 2m PermitRootLogin yes RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile %h/.ssh/authorized_keys ChallengeResponseAuthentication no UsePAM yes AllowTcpForwarding no ChrootDirectory none Subsystem sftp internal-sftp -f DAEMON -u 000 And here's the output from /usr/syno/sbin/sshd -d, showing the failed attempt of joeuser trying to log in, with /bin/bash as the shell: debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: HPN Buffer Size: 87380 debug1: sshd version OpenSSH_5.8p1-hpn13v11 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: read PEM private key done: type ECDSA debug1: private host key: #2 type 3 ECDSA debug1: rexec_argv[0]='/usr/syno/sbin/sshd' debug1: rexec_argv[1]='-d' Set /proc/self/oom_adj from 0 to -17 debug1: Bind to port 22 on ::. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on :: port 22. debug1: Bind to port 22 on 0.0.0.0. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on 0.0.0.0 port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 6 out 6 newsock 6 pipe -1 sock 9 debug1: inetd sockets after dupping: 4, 4 Connection from 127.0.0.1 port 52212 debug1: HPN Disabled: 0, HPN Buffer Size: 87380 debug1: Client protocol version 2.0; client software version OpenSSH_5.8p1-hpn13v11 SSH: Server;Ltype: Version;Remote: 127.0.0.1-52212;Protocol: 2.0;Client: OpenSSH_5.8p1-hpn13v11 debug1: match: OpenSSH_5.8p1-hpn13v11 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1-hpn13v11 debug1: permanently_set_uid: 1024/100 debug1: MYFLAG IS 1 debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: AUTH STATE IS 0 debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: client->server aes128-ctr hmac-md5 none SSH: Server;Ltype: Kex;Remote: 127.0.0.1-52212;Enc: aes128-ctr;MAC: hmac-md5;Comp: none debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: server->client aes128-ctr hmac-md5 none debug1: expecting SSH2_MSG_KEX_ECDH_INIT debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user joeuser service ssh-connection method none SSH: Server;Ltype: Authname;Remote: 127.0.0.1-52212;Name: joeuser debug1: attempt 0 failures 0 debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: PAM: initializing for "joeuser" debug1: PAM: setting PAM_RHOST to "localhost" debug1: PAM: setting PAM_TTY to "ssh" debug1: userauth-request for user joeuser service ssh-connection method password debug1: attempt 1 failures 0 debug1: do_pam_account: called Accepted password for joeuser from 127.0.0.1 port 52212 ssh2 debug1: monitor_child_preauth: joeuser has been authenticated by privileged process debug1: PAM: establishing credentials User child is on pid 9129 debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 65536 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_new: session 0 debug1: session_pty_req: session 0 alloc /dev/pts/1 debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 9130 debug1: session_exit_message: session 0 channel 0 pid 9130 debug1: session_exit_message: release channel 0 debug1: session_by_tty: session 0 tty /dev/pts/1 debug1: session_pty_cleanup: session 0 release /dev/pts/1 Received disconnect from 127.0.0.1: 11: disconnected by user debug1: do_cleanup debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: closing session debug1: PAM: deleting credentials Here you have the full output of sshd -dd, together with ssh -vv. Bash: # bash --version GNU bash, version 3.2.49(1)-release (arm-none-linux-gnueabi) Copyright (C) 2007 Free Software Foundation, Inc. The bash binary was cross compiled from source. I also tried using a pre-compiled binary from the Optware distribution, but had the exact same problem. I checked for missing shared libraries using objdump -x, but they're all there. Any ideas what could be causing this "Permission denied, please try again."? I'm almost diving in the bash source code to investigate, but trying to avoid hours chasing something that may be silly.

  Read the article

• Windows server 2008 R2 IIS7 file permissions

  - by StealthRT

  Hey all i am trying to figure out why i can not access a index.php file from within the wwwroot/mollify/backend directory. It keeps coming up with this: Server Error 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied. I've given all the permissions (Full control) to the wwwroot directory i could think of (IUSR, Guest, GUESTS, IIS_IUSRS, Users, Administrators, NETWORK, NETWORK SERVICE, SYSTEM, CREATOR OWNER & Everyone). I also added index.php to the "Default Document" under my website settings in IIS 7 manager. What else am i missing? Thanks! David

  Read the article

• activesync not working with forms based authentication

  - by Chad

  I have an Exchange 2003 SP2 single backend server with an SSL cert. I was having trouble getting OMA to work so I found a MS article about making a reg hack and creating a new Exchange-OMA virtual directory. I am able to connect and access content from my mailbox by using secure mail.domainname.com/oma and using my credentials. ActiveSync was not working on a Windows mobile phone or iPhone. I found another article about using Forms Based Authenication and SSL on a single Exchange server environment and the fix was to elliminate FBA and SSL for the Exchange virtual directory. That allows ActiveSync to now work. I have very few mobile users, but they are management, so I need to make ActiveSync work but I would like to get back to using SSL. http://support.microsoft.com/kb/817379 Any ideas about this setup? Thanks.

  Read the article

• SQLServer 2008 Fails to start under NT AUTHORITY/NETWORK SERVICE account

  - by braincells2pixels

  Not sure what changed but looks like my security credentials have been monkeyed with. Since yesterday evening after I disconnected from our corporate network and rebooted my laptop at home, I am unable to start the instance of SQL2K8. The service is set to run under NT AUTHORITY\NETWORK SERVICE account. The event log records an Access Denied error on the Master.mdf. Switching the account to Local System starts the service but our application runs into security errors. Any clues? TIA

  Read the article

• Authentication problem: can't bypass the login prompt when browsing to the SQL Reporing Services website

  - by laurens

  I'm having a hard time configuring Reporting services on one of our servers. I'm not uninitiated in the domain of IIS7 but I cannot get rid of the login prompt when I'm surfing to the Reporting services website. What I did: I made a windows and SQL user with the same name: Then I choose Anonymous authentication in II7 and filled in the credentials of the specific R.S. user http://img32.imageshack.us/i/iis7auth.jpg/ I choose 'Local Service' as the service account in the R.S. configuration mgr http://img88.imageshack.us/i/rsconfigmgr.jpg/ The first problem is that there's always a pop-up when surfing to the website The second is that when I'm able to log in I get the message that the user doesn't have the appropriate permissions. The pop-up: http://img693.imageshack.us/i/loginpopup.jpg/ The server is a 2008 Web Server with SQL 2008 R2 Express. What am I doing wrong? Thanks in advance!

  Read the article

• Reputable web based ssh client? [closed]

  - by Doug T.

  I'm connected to a coffee shop's wireless network right now, and I suspected I'd be able to use my laptop and ssh somewhere. Unlucky me they seem to be blocking everything but web traffic (my testing seems to show everything but port 80 is working, can't ping, ftp, etc). I googled "web based ssh clients" however I have reservations about entering my login credentials on any Joe Schmoe's web app. I was wondering if anyone has had any experience with any reputable web based ssh clients? If so could you please point me at one that I could trust?

  Read the article

• Cannot connect Office 365 email with Outlook 2010

  - by Dimitris

  I have an email address of the form [email protected] that I am accessing through this site. I had connected my email to Outlook 2010 and it was working fine. Recently, it started requesting credentials every time I logged in, without connecting to the email server even after entering the correct password. I had already decided to reinstall Windows 7, so I thought that would also fix this problem. Unfortunately it did not. I tried the troubleshoot function embedded in the Office 365 capabilities, but it did not find anything wrong. I suspect that one possible source of this problem could be the fact that in the control panel it states Mail (32-bit) while Windows is 64-bit (office is 32 as well). In addition when trying to remove an email account from the list it remains there unaffected. Does anybody know what should I do in order to fix this problem?

  Read the article

• vncserver too many security failures

  - by cf16

  I try to connect to my vncserver running on CentOs from home computer, behind firewall. I have installed Win7 and Ubuntu both on this machine. I have an error: VNC conenction failed: vncserver too many security failures even when loging with right credentials (I reset passwd on CentOs). Is it something regarding that I try as root? I think important is also that I have to login to remote Centos through port 6050 - none else port works for me. Do I have to do something with other ports? I see that vncserver is listening on 5901, 5902 if another added - and I consider connection is established because from time to time (long time) the passwd prompt appears,... right? please help, what to do? even if prompt appeared and I put correct password I get: authentication failure. how to disable this lockout for a testing purposes?

  Read the article

• Windows 2008 DHCP service fails - "...failed to see a directory server for authorization."

  - by ewwhite

  I have a small environment running Windows 2008 R2 where the DHCP service on the domain controller fails every two weeks. The most-visible error is Event ID 1059 and the Event Viewer message is: "The DHCP service failed to see a directory server for authorization." The setup features two domain controller and the usual services and roles (file, print, Exchange). Restarting the service fails for a variety of reasons. I've had the following messages at different times: "Not enough storage is available to complete this operation". "Unable to determine the DHCP Server version for the Server 192.168.x.x" "The DHCP service has detected that it is running on a DC and has no credentials configured for use with Dynamic DNS registrations initiated by the DHCP service." A reboot of the domain controller resolves the issue for ~2 weeks. The systems are virtualized and there are no network connectivity issues. Any ideas what's happening here?

  Read the article

• Loggon to Internet Hotspot from within Linux Terminal

  - by Saif Bechan

  For internet I use a local Hotspot service. I have internet when I start my browser and fill in my username and password. This stays as long as I do not shut down my PC for a while. I run some virtual machines, centos, debian, from the command line. I run these just for small test purposes, nothing special, and security is not an issue for me at all. I want to have these VM's connect directly to the hotspot if this is possible. So they each have there own IP. I have enough hotspot accounts to do so. I can do this with a bridged connection in VMware which works find with a GUI. But I run these OS's from the command line. I only need to know a way how to get the hotspot to validate my credentials. Is there a way of doing this without having a gui.

  Read the article

• How to use auto-discovery with iDRAC Enterprise?

  - by jwiz

  All I want to do is: have "auto discovery" enabled on my iDRAC enterprise at the factory rack the server, cable iDRAC to dhcp-enabled management network have the iDRAC DHCP, find the "Provisioning Server", and get updated with login credentials (for us to use with racadm, idrac webui, etc.) I don't need to do any configuring of the system, install OS, or anything else. I just want idrac to dhcp out of the box, and end up with an account that can be used to login. All the docs I can find on Dell's site refer to a "Provisioning Server", but I honestly can't tell if they have some reference product, or if they only have software that "integrates" with other vendor's existing management systems. I'd be happy to set up whatever is needed, I just can't find something that explicitly describes the process (only references to the fact that it is supported).

  Read the article

• ADFS 2.0 and WebEx

  - by DavisTasar

  We have a brand new deployment going on, where our University has purchased WebEx MeetingPlace. We have the Cisco CallManager component working, but the integration with Single Sign On with ADFS 2.0 has been nothing short of torture. The biggest problem I'm working with is that we use Split-Brain DNS, and our internal domain name versus external domain name is different. Trying to determine what credentials are getting passed back and forth, certificate errors for using the self-signed certificate, etc. Does anyone have any experience with this, or something similar? Do you have any tips, or watch-out-for-this, etc.? I've not worked with a Federated Authentication system before, and this scenario is very black-box-esque. Sorry, I'm also partially ranting as I'm frustrated.

  Read the article

• How to connect to a PEAP GTC wifi network with Android 2.2 on a nexus one?

  - by Glen

  Hi, I recently updated my nexus one to 2.2. Now I can't connect to my uni's wifi. They use PEAP with GTC. I had it working fine on 2.1. Also it works fine on my Ubuntu laptop. I have entered my uni number (user name) in the identity box. I have entered my password in the password box. I have emailed the certificated that works on Ubuntu to my self and installed it on the nexus one. I have enabled secure credentials. What am I doing wrong? Thanks, Glen.

  Read the article

• Access writes issue in MAC

  - by user594738

  Hi All, I have a MAC machine running MAC OS Version 10.6.6. I have added my mac machine to a domain controller (which runs Windows version of server) and allow users from domain controller to login. Because of our server migration, we removed the mac machine from old domain controller and added it to the new domain controller. Users in the old domain controller are copied to new domain controller. When I login into mac (which is added to new domain controller) with the domain controller user credentials, I was not able to access my desktop folders and any other folders in my users directory. It says "The folder Desktop can't be opened because you don't have permission its contents" Any idea why I was not able to access my home directory and how can I resolve this issue...!

  Read the article

• IIS7 FTP Setup - An error occured during the authentication process. 530 End Login failed

  - by robmzd

  I'm having a problem very similar to IIS 7.5 FTP IIS Manager Users Login Fail (530) on Windows Server 2008 R2 Standard. I have created an FTP site and IIS Manager user but am having trouble logging in. I could really do with getting this working with the IIS Manager user rather than by creating a new system user since I'm fairly restricted with those accounts. Here is the output when connecting locally through command prompt: C:\Windows\system32>ftp localhost Connected to MYSERVER. 220 Microsoft FTP Service User (MYSERVER:(none)): MyFtpLogin 331 Password required for MyFtpLogin. Password: *** 530-User cannot log in. Win32 error: Logon failure: unknown user name or bad password. Error details: An error occured during the authentication process. 530 End Login failed. I have followed the guide to configure ftp with iis manager authentication in iis 7 and Adding FTP Publishing to a Web Site in IIS 7 Things I have done and checked: The FTP Service is installed (along with FTP Extensibility). Local Service and Network Service have been given access to the site folder Permission has been given to the config files Granted read/write permissions to the FTP Root folder The Management Service is installed and running Enable remote connections is ticked with 'Windows credentials or IIS manager credentials' selected The IIS Manager User has been added to the server (root connection in the IIS connections branch) The new FTP site has been added IIS Manager Authentication has been added to the FTP authentication providers The IIS Manager user has been added to the IIS Manager Permissions list for the site Added Read/Write permissions for the user in the FTP Authorization Rules Here's a section of the applicationHost config file associated with the FTP site <site name="MySite" id="8"> <application path="/" applicationPool="MyAppPool"> <virtualDirectory path="/" physicalPath="D:\Websites\MySite" /> </application> <bindings> <binding protocol="http" bindingInformation="*:80:www.mydomain.co.uk" /> <binding protocol="ftp" bindingInformation="*:21:www.mydomain.co.uk" /> </bindings> <ftpServer> <security> <ssl controlChannelPolicy="SslAllow" dataChannelPolicy="SslAllow" /> <authentication> <basicAuthentication enabled="true" /> <customAuthentication> <providers> <add name="IisManagerAuth" enabled="true" /> </providers> </customAuthentication> </authentication> </security> </ftpServer> </site> ... <location path="MySite"> <system.ftpServer> <security> <authorization> <add accessType="Allow" users="MyFtpLogin" permissions="Read, Write" /> </authorization> </security> </system.ftpServer> </location> If I connect to the Site (not FTP) from my local IIS Manager using the same IIS Manager account details then it connects fine, I can browse files and change settings as I would locally (though I don't seem to have an option to upload files). Trying to connect via FTP though either through the browser or FileZilla etc... gives me: Status: Resolving address of www.mydomain.co.uk Status: Connecting to 123.456.12.123:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER MyFtpLogin Response: 331 Password required for MyFtpLogin. Command: PASS ********* Response: 530 User cannot log in. Error: Critical error Error: Could not connect to server I have tried collecting etw traces for ftp sessions, in the logs I get a FailBasicLogon followed by a FailCustomLogon, but no other info: FailBasicLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | ErrorCode=0x8007052E StartCustomLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | LogonProvider=IisManagerAuth StartCallProvider SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | provider=IisManagerAuth EndCallProvider SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} EndCustomLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} FailCustomLogon SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | ErrorCode=0x8007052E FailFtpCommand SessionId={cad26a97-225d-45ba-ab1f-f6acd9046e55} | ReturnValue=0x8007052E | SubStatus=ERROR_DURING_AUTHENTICATION In the normal FTP logs I just get: 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 ControlChannelOpened - - 0 0 e2d4e935-fb31-4f2c-af79-78d75d47c18e - 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 USER MyFtpLogin 331 0 0 e2d4e935-fb31-4f2c-af79-78d75d47c18e - 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 PASS *** 530 1326 41 e2d4e935-fb31-4f2c-af79-78d75d47c18e - 2012-10-23 16:13:11 123.456.12.123 - 123.456.12.123 21 ControlChannelClosed - - 0 0 e2d4e935-fb31-4f2c-af79-78d75d47c18e - If anyone has any ideas than I would be very grateful to hear them. Many thanks.

  Read the article

• SMTP error 503 when sending mail with Windows Mail & Mobile Me:

  - by Marty Pitt

  I've started getting an error on my windows machine when sending an email through Windows Mail, using Mobile Me: An unknown error has occurred. Subject 'Test' Server Error: 503 Server Response: 503 5.7.0 TLS already in use. Server: 'smtp.me.com' Windows Live Mail Error ID: 0x800CCC65 Protocol: SMTP Port: 587 Secure(SSL): Yes I've checked and double-checked my credentials, and outbound mail settings, and they're correct. I've deleted and re-added the account, and I get the same issue. I'm able to receive email fine. Note - this issue only affects one PC - my laptop has no issues. Any suggestions on what Error 503 means, or how I would fix this?

  Read the article

• Unable to connect to sites using IIS7 Manager

  - by Phil.Wheeler

  I'm a developer who has been assigned the task of managing and configuring a new IIS7 instance on a remote server. My domain account has been added as to the local Administrators group on the box, but IIS7 has been configured to accept connections only from accounts with Windows credentials. I've added my domain account to the IIS Manager Permissions for one of my sites, but I'm still unable to connect to either that site, the IIS instance or the server in general from my local machine. There's obviously a missing element to the configuration of this setup but I don't know where to start looking. The event logs on the IIS box show audit failures for my account when trying to connect remote via the IIS7 Manager tool on my local machine. Suggestions gratefully received.

  Read the article

• SSH as root using public key still prompts for password on RHEL 6.1

  - by Dean Schulze

  I've generated rsa keys with cygwin ssh-keygen and copied them to the server with ssh-copy-id -i id_rsa.pub [email protected] I've got the following settings in my /etc/ssh/sshd_config file RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys PermitRootLogin yes When I ssh [email protected] it still prompts for a password. The output below from /usr/sbin/sshd -d says that a matching keys was found in the .ssh/authorized_keys file, but it still requires a password from the client. I've read a bunch of web postings about permissions on files and directories, but nothing works. Is it possible to ssh with keys in RHEL 6.1 or is this forbidden? The debug output from ssh and sshd is below. $ ssh -v [email protected] OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012 debug1: Connecting to my.ip.address [my.ip.address] port 22. debug1: Connection established. debug1: identity file /home/dschulze/.ssh/id_rsa type 1 debug1: identity file /home/dschulze/.ssh/id_rsa-cert type -1 debug1: identity file /home/dschulze/.ssh/id_dsa type 2 debug1: identity file /home/dschulze/.ssh/id_dsa-cert type -1 debug1: identity file /home/dschulze/.ssh/id_ecdsa type -1 debug1: identity file /home/dschulze/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 9f:00:e0:1e:a2:cd:05:53:c8:21:d5:69:25:80:39:92 debug1: Host 'my.ip.address' is known and matches the RSA host key. debug1: Found key in /home/dschulze/.ssh/known_hosts:3 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/dschulze/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Offering DSA public key: /home/dschulze/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Trying private key: /home/dschulze/.ssh/id_ecdsa debug1: Next authentication method: password Here is the server output from /usr/sbin/sshd -d [root@ga2-lab .ssh]# /usr/sbin/sshd -d debug1: sshd version OpenSSH_5.3p1 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: rexec_argv[0]='/usr/sbin/sshd' debug1: rexec_argv[1]='-d' debug1: Bind to port 22 on 0.0.0.0. Server listening on 0.0.0.0 port 22. debug1: Bind to port 22 on ::. Server listening on :: port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 5 out 5 newsock 5 pipe -1 sock 8 debug1: inetd sockets after dupping: 3, 3 Connection from 172.60.254.24 port 53401 debug1: Client protocol version 2.0; client software version OpenSSH_6.1 debug1: match: OpenSSH_6.1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: permanently_set_uid: 74/74 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: client->server aes128-ctr hmac-md5 none debug1: kex: server->client aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user root service ssh-connection method none debug1: attempt 0 failures 0 debug1: PAM: initializing for "root" debug1: userauth-request for user root service ssh-connection method publickey debug1: attempt 1 failures 0 debug1: test whether pkalg/pkblob are acceptable debug1: PAM: setting PAM_RHOST to "172.60.254.24" debug1: PAM: setting PAM_TTY to "ssh" debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: trying public key file /root/.ssh/authorized_keys debug1: fd 4 clearing O_NONBLOCK debug1: matching key found: file /root/.ssh/authorized_keys, line 1 Found matching RSA key: db:b3:b9:b1:c9:df:6d:e1:03:5b:57:d3:d9:c4:4e:5c debug1: restore_uid: 0/0 Postponed publickey for root from 172.60.254.24 port 53401 ssh2 debug1: userauth-request for user root service ssh-connection method publickey debug1: attempt 2 failures 0 debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: trying public key file /root/.ssh/authorized_keys debug1: fd 4 clearing O_NONBLOCK debug1: matching key found: file /root/.ssh/authorized_keys, line 1 Found matching RSA key: db:b3:b9:b1:c9:df:6d:e1:03:5b:57:d3:d9:c4:4e:5c debug1: restore_uid: 0/0 debug1: ssh_rsa_verify: signature correct debug1: do_pam_account: called Accepted publickey for root from 172.60.254.24 port 53401 ssh2 debug1: monitor_child_preauth: root has been authenticated by privileged process debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: ssh_gssapi_storecreds: Not a GSSAPI mechanism debug1: restore_uid: 0/0 debug1: SELinux support enabled debug1: PAM: establishing credentials PAM: pam_open_session(): Authentication failure debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 1048576 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_pty_req: session 0 alloc /dev/pts/1 ssh_selinux_setup_pty: security_compute_relabel: Invalid argument debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 17323 debug1: session_exit_message: session 0 channel 0 pid 17323 debug1: session_exit_message: release channel 0 debug1: session_pty_cleanup: session 0 release /dev/pts/1 debug1: session_by_channel: session 0 channel 0 debug1: session_close_by_channel: channel 0 child 0 debug1: session_close: session 0 pid 0 debug1: channel 0: free: server-session, nchannels 1 Received disconnect from 172.60.254.24: 11: disconnected by user debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: deleting credentials

  Read the article

• SQL Server User Mapping - Limit view of databases for a user

  - by Jaime

  Hi there, I am adding a new Login with SQL Server Authentication. I set its Server Role as public and then went into User Mapping, selecting the only database this user should have access to. I then change the Default Schema to dbo and made this user the db_owner. I then connect to the instance using the new user's credentials and I can see not only the database he should have access to but all the other attached databases. How can I limit this user to just see the database he has access to? Thanks in advance!

  Read the article

• wmic output well formed xml on remote queries

  - by Mervin

  I want to use the WMI command line tool (wmic) to get information about windows computers on the network and output it as valid xml. However, I can't seem to find the right way to do this as the outputted xml currently contains invalid tokens for which I think I should use the /TRANSLATE:basicxml switch. The command: wmic /NODE:"tech-demo" /IMPLEVEL:Impersonate /USER:MyUser /PASSWORD:MyPassword /PRIVILEGES:DISABLE /AUTHLEVEL:Pkt /AUTHORITY:"ntlmdomain:companydomain.local" PATH Win32_LogicalDisk GET * /FORMAT:rawxml This command runs but returns invalid xml tokens ('<' and '' I think? edit: it appears to fail parsing at ‹) When I add the translate switch I get the message: Can not use credentials for local connections a bit strange that it tries to query the local pc when I add the switch.. Help would be greatly appreciated.

  Read the article

< Previous Page | 40 41 42 43 44 45 46 47 48 49 50 51  | Next Page >