Search Results

Search found 15925 results on 637 pages for 'os walk'.

Page 442/637 | < Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >

• VLC 2.0: can't enable UPnP support

  - by Craig

  I'm attempting to use VLC 2.0.1 (Intel 64 bit) to connect to a UPnP server (Serviio 0.6.2 on OS X Snow Leopard). I've tried to enable the feature by right clicking the "Universal Plug 'n Play" node in the LOCAL NETWORK section of the Main Window. While I am able to select 'Enable', the setting doesn't seem to 'stick'. Moreover, UPnP isn't listed in the Playlist Service discovery section of the preferences. The 'Service discovery modules' is currently set to upnp_intel:sap. I am able to connect to the UPnP server with my Samsung TV, so I know that the service works.

  Read the article

• Massive amount of subfolders and long subfolders. ¿How can I delete all of them?

  - by Carlos

  Good day. We have a little problem here. We have a share with the backup of all the server's offices, Its a really big share with more than 8.000.000 files. Our users usually give long names to the folders they create, and then make subfolders (long too) and more subfolders... and more suboflders.... We have a new share with more capacity, and with a simpe robocopy bat we copied all the files and folders (some give problems, but we manually copied them) But the problem is deleting them. del command didnt work well when so long paths, neirder rmdir... I'm tried some commanders, but no luck. Can u recommend me any tool that can delete recursively or able to delete 255+ paths? Edited: The SO on background of the share it's NetApp OS. But I can access it from Windows Servers. 2000 and 2003 Thanks.

  Read the article

• Problem setting up DL360G5 with scsi RAID

  - by ernelli

  I have a problem with reinstalling OS on a DL360G5. The BIOS [F9] do not detect any disc controllers and the HP SmartSetup did not find any compatible controllers. Inside the server, the two SCSI disks are conncted to a RAID controller using BCM8603 chipset. How is disc contoller supposed to be setup? I have tried to do a full BIOS reset. EDIT At the moment we suspect that the Smart Array controller E200i/412205-001 is broken. Are there any status LED's that indicate failure or success during start up? At the moment all LED's are off.

  Read the article

• Dual Boot menu with Ubuntu and Windows 8 not showing up

  - by user180630

  I know a lot of posts have been written, and I had read most of them when I encountered the problem. None of them solved the problem. I have successfully installed Ubuntu 12.04 on top of Windows 8. Now my PC simply boots into Windows 8. If I press 'Esc' at start of BIOS, and then F9,the GRUB shows up and Ubuntu is listed at the top of the several options to boot from. I did run Boot-Repair once I logged into Ubuntu explicitly from GRUB as mentioned above. I did all said by Stormvirux in this link but was still unsuccessful. The debug info is listed here. Something which confuses me is the message which Boot-Repair stated after it did its job. You can now reboot your computer. Please do not forget to make your BIOS boot on sda (8004MB) disk! The boot files of [The OS now in use - Ubuntu 12.04.2 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, 200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) I don't know why it says it is far from the start of the disk as I see it first in the GRUB menu which comes up at startup. One more input, when I try to place the GRUB in sda, Boot-Repair does not progress giving me the following error: GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. Alternatively, you can retry after activating the [Separate /boot/efi partition:] option. I had to select Separate /boot/efi partition: sdb2

  Read the article

• I'm running Ubuntu notebook on a USB drive with 1GB persistence. Where are my XAMPP files?

  - by CDeanMartin

  I just began running Ubuntu Notebook on my 2GB USB stick, with 1GB persistence. After I installed XAMPP, I rebooted to make sure the persistence was working. It worked! My XAMPP installation worked, and it comes up when I type localhost into the browser. The sample apps work, including the ones using MySQL. But I can't find the application files! I am used to the vast labyrinth of files in Windows Explorer, and looking through 'Files and Folders' in GNOME, there seem to only be 7 or 8 folders in the entire OS? What is really going on here? I looked through them all and where is XAMPP? When I code PHP with a WAMP stack, all the .php files go in the 'WWW folder' What is the Linux equivalent of the WWW folder?

  Read the article

• Triple Boot - With storage partition

  - by art

  I'm new to the multi-boot world, as i used to rely on virtualizing for running linux. Recently i moved to Dual booting Windows 7 and Ubuntu, with a storage partition for all my files where both operating systems could access them. Is it possible, to have 1 partition for 7, another for XP, another for Ubuntu, and a separate partition where the OS's can access my files? so 4 partitions on my hdd. and if there's a better way to go about this (or if its not possible), please let me know! thanks

  Read the article

• how to create a mirror of minimum size to install Ubuntu

  - by Registered User

  I need to create an http url at my laptop to have a Ubuntu installation begin within my laptop on a Xen environment. This is how the final thing will look like http://bderzhavets.wordpress.com/2008/10/28/install-ubuntu-intrepid-server-pv-domu-at-xen-33-port-via-httpgetco-centos-52-dom0/ the host and client are both going to be my laptop, I Google d and came across apt-mirror and some other packages. I do not want to archive entire 15 GB Ubuntu repositories on my machine. It is not possible to use a CD,ISO,loop mounted disk (reason mentioned below). I have tried using netboot image on local machine which failed because if you are attempting to create a virtual machine on a hardware which does not support VT virt-manager installer necessarily needs a URL of this sort http://archive.ubuntu.com/ubuntu/dists/hardy/main/installer-i386/current/images/netboot/ any other option to create guest OS is simply grayed out. The unfortunate part is my Ethernet connections do not work when I boot with Xen-4.0 and a pv-ops Dom0 kernel from Jeremy's tree.Which is where I have to do this work.So I have to create a URL structure which is similar to Ubuntu mirrors.So how can I do this in bare minimum so that at least the console boots and once the console comes I can do some work.

  Read the article

• Cannot enter BIOS due to broken screen

  - by gamer

  Lately my laptop(hp g42 247sb) screen is damaged, so I hook it up with a external monitor(LG something) and it works fine now. But the only annoying thing is I cannot navigate the BIOS menu for some tweaking because the BIOS not shown on the external monitor,instead, it only shown on the broken laptop screen, and it only output to my external monitor when windwos/os is loged-on. So, is there anyway I can force output during BIOS/BOOT/POST to my external monitor? Things I have done and didn't work: (1)Set my LG monitor as primary display on both window properties and Intel Graphics panel (2)Enter the bios (F10 key) and press the fn+F4 key(change display output). (3)Disable and uninstall my internal screen(broken laptop screen) using device manager and restart, but windows(bios?) install it back on log-on. Please help me!

  Read the article

• How to batch rename files copied from OSX to Windows with ':' in filenames?

  - by tputkonen

  This is really puzzling. I have lots of videos that were stored using Mac OS, and now I have to edit them on Windows XP. I copied files using HFSExplorer. Editing software refuses to open the files with their current names, and so far I have not found a way to batch rename all the files. Names of the files look like this: clip-2009-10-01 21;26;00.mov But I suspect in OSX the time was 21:26:00. I would like to replace the space with an underscore, and semicolons with dash. I've tried several bulk rename applications, with ; and :, but in vain. Also I've tried rename.pl, but also in vain.

  Read the article

• Preventing SSH RSA host key warnings for change of key vs IP address

  - by Adam M-W

  I have a network with DHCP enabled, and also a computer that dual boots operating systems and has different SSH keys on each (and yes, I would like to keep different keys on each rather than copying the same identity/private key to each). Because the IP address does not change between operating systems because the MAC address is the same, when connecting to ssh, even when not using the IP address but the hostname via DNS/mDNS, I get the warning: Warning: the RSA host key for 'hostname' differs from the key for the IP address '192.168.1.172' Offending key for IP in /Users/user/.ssh/known_hosts:37 Matching host key in /Users/user/.ssh/known_hosts:38 Are you sure you want to continue connecting (yes/no)? How can I surpress the warning when the hostname differs from the IP address for that hostname, but retain the ability to check host keys are the same for each hostname? (each OS has a unique hostname)

  Read the article

• What "file system" is supported by Windows and Linux?

  - by Skiroid

  I'm setting up a media centre for my living room so that I'm able to watch downloaded films and TV shows on the big screen. The media centre is an old small computer which will have XBMCbuntu 12 installed on it. Right now, the media centre has a 300 GB HDD partitioned into two: 1) Ext4 50 GB (where I'll install the OS) 2) swap 6 GB (swap area) I'm wanting a third partition which I can store all my media on to. This partition will fill the rest of my HDD. Although, I'm stuck on which file system I should set it to. I need the file system to be fully compatible with Windows as I'm going to be removing the HDD from the media centre and plugging it into my main PC, running Windows 8, to transfer the media onto it. I can't transfer over Wi-Fi as the media centre won't be connected to the Internet. My options are: Ext4 journaling, Ext3 journaling, Ext2 journaling, ReiserFS journaling, btrfs journaling, JFS journaling, XFS journaling, FAT16 and FAT32. I know that FAT32 is compatible with Windows but it can only hold files that are 4 GB or less and my films are well over 4 GB. Some more than 10 GB. Is there a file system I can use which is supported by Linux and pops up under Computer in Windows?

  Read the article

• static index.html file nginx

  - by Guntis

  We are using nginx with php-fpm. We plan to make first page static (generate html file). if we have 100 concurrent connections, how we can handle file regeneration? basically we need generate new file index_new.html, then delete index.html, and then move index_new.html to index.html. What happens when index.html file was deleted? User gets 404 error? Or nginx handles file from OS cache? One idea is to tell nginx, that 404 error is index_new.html and then not to move index_new to index, but copy. But i don't like idea about 404 error. Thanks.

  Read the article

• Can I install new version of Ubuntu in spair RAIDed partition with unetbootin

  - by artfulrobot

  I have Ubuntu 11.04 running on my home desktop which has 2 hard drives mirrored by RAID. The drives are partitioned with a big data partition, a swap partition and a couple of 20Gb partitions for OSes, one is 11.04 which is in use, and the other is kept spare for installing a later version. Which is what I'd like to do now. The idea of a 2nd partition for new OS is that I can try it, and if it's problematic, I can boot back into the original one - the machine is shared with others, so I need it to stay available! I have had horrible problems with software RAID after using a Live USB stick - basically it messes up the internal numbering of the RAID drives or something, anyway, the result is you can't boot after using it :-( and have to spend ages re-assembling the arrays, trying to remember grub commands etc etc. Quite a shocker when you consider booting from a Live USB is supposed not to affect the existing system. As I'm installing in a RAIDed disc, I would typically use the Alternative install (sad to hear that this is going to be dropped in future). However, I think I might be able to use unetbootin to trick the system into working on top of the existing system that understands RAID, with the normal ISO? If unetbootin loads from drives that are already understood to be RAIDED, then presumably it will only see md0... instead of sda, sdb... and as long as I don't need to repartition (I don't) it should be fine, right? Or is that just plain foolishness? Please tell me before I end up with a dead system (again!)

  Read the article

• 14.04.1 LTS 64 bit from USB does not see my windows 7 when I go to install it

  - by W J

  I suppose this is as much a question as a heads up/warning 14.04.1 LTS only gave me the option of writing over everything on one of my windows 7 machines. If I'd pushed the wrong button and continued I would have lost some mighty important items. On a similar windows laptop I succesfully installed 14.04.1 LTS 32 bit alongside windows 7 rather easily ( and I dig it!), there was a prompt in that case that let me select to install it alongside my windows OS.Yikes, not in this case. This laptop was formatted NTFS, the Ubuntu usb pendrive I formatted fat32. could be a clue? It looks like there is an advanced install ubuntu, but I am not that advanced. I may try to use windows diskformat (What fdisk is gone?) to make a partition, then see if the ubuntu on my usb stick "sees" my windows. If anybody has a better plan let me know. Mahalo AHA!? p.s. its a SSD harddrive, perhaps thats the crux?

  Read the article

• What causes an MSI package to launch following application install

  - by Damo

  We have an application we have developed, it gets deployed via an MSI I built. The MSI has been used in many locations, on many different builds. On one customers site, on occasion we are seeing some odd occurrences of data from the registry going missing. The 'data' from some select registry keys disappears and we have little idea why. One interesting point is that the MSI installer for our application has been seen in passive mode during OS load / load of our application on stat-up. The MSI loads a progress bar then disappears, following this our application loads up. It has been noted that following this the data disappears from our registry. However I can't say these two events are absolutely linked, it could have been missing before this event. What causes the MSI for an application to launch way after initial installation. How can it be prevented (correctly)

  Read the article

• Snow Leopard, PHP, and MySQL

  - by Peter

  I have just installed Snow Leopard and now my PHP/MySQL program ends in a "Segmentation fault". I have been searching the web for a solution, I realize that there are some issues with SL/PHP/MySQL, but I have not found anything that works yet. I downloaded the binary MySQL package mysql-5.1.42-osx10.6-x86_64. I have updated the php.ini file as suggested at various posts. When I run PHP and connect to the MySQL server the behavior is a bit random. In many cases it works fine to connect and read data. In my specific case the PHP program constructs a LOAD DATA LOCAL INFILE ... statement to load data from a text file. It should do several such queries after each other in a loop. It works one time but the halts in a "Segmentation fault". The program worked fine in Leopard, but not now. My versions are: OS 10.6.2, PHP 5.3.0, MySQL 5.1.42

  Read the article

• Django HttpResponseRedirect acting as proxy rather than 302

  - by Trevor Burnham

  I have a Django method that's returning return HttpResponseRedirect("/redirect-target") When running the server locally, if I visit the page that returns that redirect, I get the log output [17/Oct/2013 15:26:02] "GET /redirecter HTTP/1.1" 302 0 [17/Oct/2013 15:26:02] "GET /redirect-target HTTP/1.1" 404 0 as expected. But, when I visit that page in Chrome, the Network tab shows the request to /redirecter with the response from /redirect-target, rather than showing the 302. cURL does the same: $ curl -I -X GET http://localhost/redirecter HTTP/1.1 404 Not Found date: Thu, 17 Oct 2013 19:32:30 GMT connection: keep-alive transfer-encoding: chunked In production, the same Django code does show a 302 redirect in Chrome and cURL. What could be going on here? Is there some kind of Django setting that might be causing it to proxy the target rather than send a redirect when HttpResponseRedirect is used (but lie about it in the log)? Or is there a quirk on my system (OS X) that might cause localhost redirects to behave this way?

  Read the article

• OS2/Warp - Remotely Stop and Restart a Program

  - by Justin S

  Our current phone system runs off of a legacy OS2/Warp box. Periodically we have to log into the machine and restart OS2RSD.exe and then start it again and the phone system starts working again. The problem is we have to physically get in front of the box and use the GUI to stop and restart the process. Is it possibly to remotely run a script to kill OS2RSD.exe if its running and then start it again? I have been unable to figure this out on my own. The OS is OS2/Warp Version 3 if that helps.

  Read the article

• iMac invalid memory access and then crash?

  - by Sam McAfee

  My iMac G5 from a few years ago (the square white one) dies now, with a message about an invalid memory access. It goes straight to an Open Firmware prompt and doesn't even load the Mac OS at all. Am I correct in guessing that the memory is probably the issue, and that if I replace it, we may be able to boot again as normal? That's my gut feeling anyway, so I ordered some more memory and plan to swap it today. Any thoughts? Ideas?

  Read the article

• Linux script to find time difference and send an email if need

  - by Gnanam

  Hi, I'm not an expert in writing shell scripts but also I'm looking for a very specific solution. OS: CentOS release 5.2 (Final) I've a Java standalone which keeps writing (all System.out.println) to a log file. For some unknown reason, this Java standalone stops working at some point of time in my server and eventually logs writing also stops working. I want to have a script which checks the last modified date & time of the log file with current date & time in the server. If the time difference exceeds more than 5 minutes, I want to send an email immediately to my recipients list. This way I'll come to know when this Java standalone has stopped working. I'll move this script to crontab and make it run for every 1 minute, so that this whole process is automated. Log file location: /usr/local/logs/standalone.log

  Read the article

• NTP doesn't sync

  - by Jonathan

  I'm using Meinberg NTP to sync the time in a VPS. The clock refuses to sync - there's a ~30s shift comparing to other servers. Meinberg NTP comes with a status script that checks hte delay\jitter every 10s and it is showing all zeros. Actions I've taken which didn't help: Restarted the NTP service using a script that comes with Meinberg NTP Added port 123 for UDP and TCP as an exception port to Windows Firewall Added Meinberk NTP executables as an exception program to Windows Firewall validated iburst appears after each server listed in the configuration file Restarted the server The OS is a Windows Server Standard SP2 32bit. What did I miss?

  Read the article

• Application toolkits like QT versus traditional game/multimedia libraries like SFML

  - by Aaron

  I currently intend to use SFML for my next game project. I'll need a substantial GUI though (RPG/strategy-type) so I'll either have to implement my own or try to find an appropriate third party library, which seem to boil down to CEGUI, libRocket, and GWEN. At the same time, I do not anticipate doing that many advanced graphical effects. My game will be 2D and primarily sprite-based with some sprite animations. I've recently discovered that QT applications can have their appearance styled so that they don't have to look like plain OS apps. Given that, I am beginning to consider QT a valid alternative to SFML. I wouldn't have to implement the GUI functionality I'd need, and I may not be taking advantage of SFML's lower-level access anyway. The only drawbacks I can think of immediately are the learning curve for QT and figuring out how to fit game logic inside such a framework after getting used to the input/update/render loop of traditional game libraries. When would an application toolkit like QT be more appropriate for a game than a traditional game or multimedia library like SFML?

  Read the article

• Problem installing Windows Server 2008 R2 on Xen 3.0

  - by GodEater

  Hi there folks, I've been googling this for a few hours now and not really getting anywhere. We have a Xen 3.0 host which I'm trying to install a copy of Windows Server 2008 R2 Standard Edition onto as a guest OS - but the install hangs at the "Starting Windows" screen when it starts running the installer. Is this is a known issue with the version of Xen we're running (I know it's positively ancient)? Is there a workaround for it at all? We've successfully got a great number of vanilla 2008 servers running on it, it appears it's an issue specific to R2. Bryan

  Read the article

• Scheduled task username changed

  - by Ernst

  I posted this originally on stack overflow where I was told I should ask it here: Hi, I created a user on our exchange server, but later changed the username. Now, when I create a scheduled task for that user, and change it's settings (run only when logged on), the username is automatically changed back to the old username. What's causing this and how do I make sure the correct, new username is used for the task (otherwise it won't run), security settings are okay. I did already log in with a different user to delete the profile on the computer and tried again with this user to no avail. The OS is windows xp, the exchange server is on windows server 2003. Thanks

  Read the article

• Why does iChat Server keep connecting to proxy.eu.jabber.org?

  - by Tom Hamming

  I have OS X Server 10.6.5 running on a new Mac Mini (server model), serving several functions among which is iChat Server (iChat and Pidgin on Windows as clients). In the iChat log in Server Admin, I kept seeing entries about connecting to proxy.eu.jabber.org. It's for our office network and I wasn't excited about external access to it, so I disabled server-to-server XMPP federation and now the connections just time out. But why is it doing that in the first place? Sample log entry: (datetime) (servername)jabberd/resolver[portnum]: [xmpp-server._tcp.proxy.eu.jabber.org resolved to 208.68.163.220:5269 (300 seconds to live) then: sending dialback auth request for route '(full server hostname)/proxy.eu.jabber.org' A couple minutes later, it comes back with: dialback for outgoing route '(full server hostname)/proxy.eu.jabber.org' timed out

  Read the article

< Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >