Search Results

Search found 15925 results on 637 pages for 'os walk'.

Page 438/637 | < Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445  | Next Page >

• Why ping another innet machine from MacBook get netgate's ip address?

  - by Xinwang

  I have three machine in my home network connected by a wireless router. One is server installed linux at 192.168.1.1, another is Thinkpad with MS Windows XP at 192.168.1.2, last one is MacBook Pro with Mac OS X 10.6.3 at 192.168.1.3. When I ping the Linux Server from Thinkpad (MS Windows XP) I can get the correct ip address, but when I ping it from Mac I get the global address of my router, like 61.135.181.175. Could you tell me why this happen? And how do I get same ping result on Mac and Windows. Thanks

  Read the article

• Mounting Gluster Volumes

  - by Roman Newaza

  I have created Hosted Zone with 2 IP addresses of Gluster Cluster, both IP are returned by dig. After mounting Gluster, I cannot ls mount point as it takes long time. mount shows me it's mounted, but df doesn't. Finally, I have this: ls: cannot access /mnt/storage: Transport endpoint is not connected. But if I mount it with the one of the IP, no problem - volume contents is accessible OS: Ubuntu 11.10 GlusterFS: 3.2.6 Log: http://pastie.org/private/2jgp4h1hnqgzych3djtg I have can telnet storage from client - ports are open.

  Read the article

• Splitting a drive which has layout as mirrored and type as dynamic

  - by shiva

  I have a C drive/volume in my server with layout = mirror and type =dynamic and status as healthy(boot,pagefile,crashdump). I have some questions regarding this configuration: I think it is a raid configuration.Please correct me if I am wrong. I read that, mirroring is nothing but raid-1 configuration. All my software and OS is in this drive. I want my software to be in a separate drive, but I am not sure if I can create a separate drive from the above mentioned c drive. I want to know: a. If I can do it and how ?(using disk management) b. If this is a right approach ?

  Read the article

• Anti Aliasing dead

  - by Gazoza

  I have a problem with anti-aliasing. No matter the software settings, it seems to be gone. I tried driver updating and reinstalling, cleaning of the hardware, different monitor with different cablies, OS reinstalling and changing, none of which helped. I decided to change the graphic card, but that didn't work either. Moreover, I have a distinct impression that the jagged edges are worsening as time goes by. I think this is a hardware-related issue, but I don't know exactly what to do. If anyone here had similar troubles, and/or has an idea how to cope with them, I'd be very grateful. My current card is a nVidia GT610.

  Read the article

• MBP becomes very hot after using Xcode

  - by Globalhawk

  Hardware: MBP early 2011 version OS: Mountain lion App: Xcode 4.5.2 Problem: Every time when I start Xcode, 2 or 3 processes called "git" start running. But when I quit Xcode the "git" process won't quit and are still using a lot of CPU. Then the computer becomes quite hot and the battery gets drained very quickly. If I manually kill these processes the problem is gone. I tried to reinstall Xcode several times but the problem comes back every time. It drives me crazy. Any help will be appreciated!

  Read the article

• Firefox completes the address bar with content absent from my history

  - by Antoine

  I have set Firefox to complete the address bar with elements from the history only ( other options are: nothing, bookmarks, and a history+bookmarks). However, Firefox still continues to complete the address bar with elements that are no longer in my history. A search in the history returns 0 result for the incriminated string. How can I solve this without loosing my entire history? I have already tried shift+delete on the elements I would like to delete, without success. How can I find the source of a certain completion ? (like an SQL request in the sqlite3 files used to store history) I'm using Firefox 16.0.2 on OS X 10.8.2.

  Read the article

• How do I force Wubi to install a 32-bit version?

  - by marx

  I'm using Windows 8 (32bit) customer preview and installing WUBI Ubuntu 12,04.1. I down loaded 32 bit installer from ubuntu dot com, The wubi installer says AMD 64 xt. I had a previous 12,04 install and in the terminal typed in uname -a, it say's 64 bit. I also opened detail from the system and it read 64 bit system. My question is: how to ensure that a windows/wubi/ubuntu/installer is 32 bit or 64 bit BEFORE making a commitment to install from the wrong wubi install? After posting this I did another wubi installation. Signed into ubuntu, opened system settings, open Details: OS Type 64 Bit. Why is it doing this? I have a 32 Bit machine: Toshiba Satellite A-215 S5818 (previous Windows Vista)<--wiped clean. from an earlier installation of Ubuntu 10.10 which worked, in feb 2012 i installed Win8 Customer Preview Release (32Bit) which took over the BOOT order and 140 GB Hard Disk. I am trying patiently to install WUBI 32 BIT Ubuntu 12.04 Install, it keeps returning 64 BIT install.. Why?? I should also mention that i was successful in a dual boot install ubuntu 10.04/win8 32 bit install and upgraded to 12.04 which is fine for now, but i want a win8/wubi/ubuntu12.04 32 bit working not 64 bit breaking what i have. thank you.

  Read the article

• How to achieve reliable Gigabit Ethernet Link with my Acer Aspire Revo R3610?

  - by The Operator

  I want to stream HD movies over my wired Gigabit LAN from my PC to my Acer Aspire Revo R3610. It's connected with a 3ft Cat5e patch cable to my Netgear GS605v2 Switch. The PC acting as File Server is connected at 1Gbps to the Switch. Network driver options are set to defaults, including automatic speed/duplex negotiation on both machines. The Revo will not connect to my Network Switch at 1Gbps - the OS reports that it reverts to 100Mbps either shortly after connection or immediately upon connection. Through a process of elimination (trying different drivers, patch cables, ports on the switch, and other 1Gbps-capable devices connected to the Network switch which successfully achieve 1Gbps links and performance) I have drawn the conclusion there is either a Hardware or Software (Driver) issue with the Revo itself. I have performed tests using Windows 7 and Ubuntu 9.10. Can anyone offer insight on Gigabit Ethernet with the Revo?

  Read the article

• Outlook 2007 disconnecting after sending email to specific email

  - by Michael

  So when a user emails another tech in my domain they get the prompt for username/password as though they got disconnected. I have not seen any issues in the event logs, tried deleting the email address from his auto correct, ran Outlook in safe mode and searched online as well. I am kind of lost. Checked the event logs on the exchange server as well in the security and still nothing. Exchange 2010, Client OS: Vista x64, Outlook 2007. Thanks!

  Read the article

• Does an inexperienced programmer need an IDE?

  - by Torben Gundtofte-Bruun

  Reading this other question makes me wonder if I (as an absolute beginner PHP programmer) should stick with WAMP and Notepad++ or to switch to some IDE like Eclipse. It's understandable that skilled developers will benefit from a big shiny IDE. But why should an absolute beginner use an IDE? Do the benefits outweigh the extra challenge of learning the IDE on top of learning to develop? Update for clarification: My goal is to get some basic programming experience. By choosing PHP and WAMP (and FogBugz and Kiln) I hope to avoid having to navigate the tricky / messy OS specifics and compiling etc. and just focus on basic functionality like an online user registration form. I've got lots of theoretical understanding from university a decade ago but no practical experience. I want to remedy that with a hobby project that would be similar to a real-world sellable web app. There are so many questions to ask. So many pitfalls I probably have to blunder into. This question is just one piece (my first!) of that puzzle.

  Read the article

• Easily tell if focused on VirtualBox window?

  - by Benjamin Oakes

  Is there a way to make it very obvious that my VirtualBox window isn't in focus? The problem I'm having is switching between workspaces on Ubuntu or OS X and then trying to type in my Windows virtual machine, only to find that it's not in focus. The Windows window looks like it's in focus (based on the title bar), but I'm actually typing in Firefox on the host machine, for example. It's even worse because the Windows text insertion cursor is blinking to show focus. Ideally, I'd like the VM's display to get unsaturated (e.g. a "partial" grayscale) when not in focus, just to prevent this keyboard-focus problem. Other options would be fine too, as long as I don't have to second guess where my focus is. I'm not using the seamless mode -- the display is all within a window.

  Read the article

• How to delete old pagefile.sys and hiberfile.sys on secondary disk (old windows install)

  - by Silvermist

  A while ago I swapped my main hard disk for a SSD. Now the old one is used as a secondary hard disk, and my OS is a fresh windows install on the main SSD disk. Nevertheless, there are still huge pagefile.sys and hiberfile.sys on that secondary hard drive. Those are not the ones used by the current windows, as those do exist on C:. I tried to attrib -s -h them, but it refused with "Access denied". Any idea how to delete those old unused system files and reclaim the space?

  Read the article

• How do I install Netatalk in Ubuntu 9.10 (tutorial)?

  - by Phobis

  I have never installed Netatalk before. I have to help someone get this up and running on a Ubuntu 9.10 server and I don't know if there is any special configuration or install steps I need to follow in Ubuntu 9.10 to get it up and running. I know in older versions of Ubuntu, specifically, special OS changes and configuration needs to be done in order to get it to work properly. Do I need to work around any of those issues in 9.10? I am doing this remotely through ssh, so I prefer instruction via command-line. Thanks!

  Read the article

• How do I start DB2 on an Amazon EC2 Volume?

  - by Spike Williams

  I've got an instance of DB2 installed as part of an IBM WebSphere Portal development AMI on the Amazon EC2 cloud. Its installed a separate, persistent file system from the rest of the AMI. Yesterday, the AMI was terminated, and DB2 went down as part of that. It was not shut down cleanly, just terminated. Today, I am trying to restart the WebSphere portal server, which needs to connect to the DB2 instance. But the DB2 instance is down. So I need to restart my DB2 instance, but how to do that is not immediately obvious. Can someone tell me what I need to run to get it going again? OS is SuSE Linux, DB2 version is 9.1

  Read the article

• What keyboard-friendly news readers exist for OSX? [closed]

  - by Chris R

  Possible Duplicate: Free Usenet reader for Mac OS X I'm interested in keyboard-navigation-friendly usenet clients for OSX. I have tried (and bought) Unison and Thunderbird, but both of these end up requiring a fair amount of mouse use to move around. What I want is something I can task-switch to, check my latest updates, and switch away from, all without having to take my hands off of the keyboard. I should clarify; this is for an internal, private nntp server, so Google Groups and sundry -- basically all web news readers -- won't do for me.

  Read the article

• Windows XP Home Edition SP3 cant recognise PCMIA SD Card

  - by Pozo

  System Specifications: Laptop : Dell Inspiron 6000 OS: Windows Home Edition SP3 SD Adapter: Hagiwara Smart Media Adapter I inserted the card into the slot, windows xp recognises the device, lists the pcmia controller on the device manager list, an entry appears under the IDE ATA/ATAPI category on the device manager as well. However, the device does not show under my computer and the driver does not get assigned a letter number. I checked the system logs from the device manager and there were no logged errors. Checking the Hagiwara support website, the manufacturer indicates that the adapter driver is the same as the windows xp pcmia controller. Checking Dell's website, no specific drivers were listed for that either. General Search on the web indicates that multiple people face similar problems with their SD cards, yet none actually spell out the route issue that causes this. Please let me know if you have any suggestions for further debugging. Thanks in advance

  Read the article

• Cam being used by another application

  - by w35t

  On my laptop doesn't work any camera. I get error: "Camera being used by another application"". I don`t known which program using it. I tried use software like "SplitCam" or "ManyCam". Also I reinstalled K-lite codec to newest, but still getting this error. I get the same error when I turn my Canon video camera to laptop using firewire cable. OS: Windows 7 x64 Camera: Creative (i don`t find which model) Laptop: DELL inspiron 1520 Error when I tried open SplitCam: http://f.imagehost.org/0759/Clipboard03.png SplitCam error when repair it: http://i.imagehost.org/0607/split.png ManyCam just not responding. SonyVegas error: http://f.imagehost.org/0227/Clipboard05.png Sorry for my English. Thanks for any help.

  Read the article

• How to Create Shortcuts to Programs on USB Drives

  - by Lori Kaufman

  If you work on multiple computers, you probably use a USB drive to take your favorite portable software with you. Portable application suites like PortableApps.com, CodySafe, or Lupo PenSuite, each have a main menu providing access to the programs installed into the suite. However, there may be reasons why you need to create shortcuts to programs on your USB drive. You may be using a program that does not integrate into the suite’s main menu. Or, you may not be using an official portable application suite at all, and just placing portable software in a folder on your USB drive. Maybe you prefer using shortcuts on the root of the USB drive, like a portable desktop. Whatever your reason, you can’t just create a shortcut to an application on the USB drive and place it in the root of the drive. The shortcut will always refer to the full path of the application, including the drive letter. Different computers assign different drive letters to USB flash drives, so you would have to change the drive letter for your shortcuts when it changes. You can assign a static drive letter to the USB drive. However, if you would rather not do that, there is a way to create shortcuts to programs on a USB drive using relative paths. Because Windows does not support relative paths in shortcuts, we will show you how to create a “shortcut” on the root of a USB drive by creating a batch (.bat) file and converting it to an executable (.exe) file. What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS How To Be Your Own Personal Clone Army (With a Little Photoshop)

  Read the article

• Partitioning Software for Windows 7

  - by nunos

  I used to use Patition Magic Pro from Norton to do disk partitioning. Now that I have Windows 7, I have been warned, by the OS itself and later confirmed on the internet, that Partition Magic Pro has compatibility issues with Windows 7. So, I am asking you which software partitioning software do you recommend. It would be great if it was freeware but I know it is hard to find a good parititioning app that's free, so, if you know a good one that's paid, there's no problem and please mention it in your reply. Thanks in advance. P.S. I am aware of "create and format disk partitions feature" of Windows 7, but that's not enough for me. I am using Windows 7 Professional 64 bits.

  Read the article

• Blender Render Cycles

  - by usersuper

  I get a very poor Render in cycles. Not just minor problems, but just a cloud of of black and white dots and no contour at all. I read a lot about this now and couldn't get it to work. Does anybody know how to get the settings right. Or better what do I have to pay attention to get better renders. I also tried external renderer like Lux, which increased my CPU usage to 98 % (just the default cube and clicking on Lux and load materials). Is this normal and what could i do to improve that. I have various versions of Blender (2.61,2.62,2.63) on Mac OS X. Thanks for the time.

  Read the article

• Windows 7 and Ubuntu Boot/Corruption Problems

  - by Kiraisuki

  I searched around, but I couldn't find the answer to why Windows 7 Ultimate 64x and Ubuntu 12.04 LTS 64x could'nt live together happily on my Asus G1s-X1 laptop. I had Windows 7 Ultimate 64x installed on the laptop when I bought it (bought it used, it comes with Vista new) and I wanted to try out Ubuntu and see what all the hype about the free OS was. I installed Ubuntu on an external 80GB iomega HDD with Windows 7 on my main drive. They both work fine for about 2-3 weeks, until Ubuntu suddenly is unable to boot. A few days after Ubuntu fails, Windows corrupts majorly (winload.exe, ntkrnlpa.exe, and various others corrupt randomly) and Windows Recovery Environment is completely useless. Booting to a live USB with Ubuntu and trying to reinstall it fails, and trying to wipe the main drive and install it there fails as well (something about my graphics card.) I managed to get Windows 7 Ultimate 64x back up and running (after many disk formats) but now I am left with a broken (and invisible) Ubuntu installation on the external drive. Is there any way to get the broken and non-bootable Ubuntu installation off the HDD without damaging or erasing the many files and programs installed and stored on the 80GB drive?

  Read the article

• Ubuntu 13.04 to 13.10: Filesystem check or mount failed

  - by SamHuckaby

  I attempted to upgrade from Ubuntu 13.04 to 13.10 today, and mid upgrade the system started flaking out, and eventually locked up entirely. I was forced to restart the computer, and am now unable to get the computer to boot up at all. When I boot currently, it takes me to the GRUB menu, and I can choose to boot normally, or boot in an older version. I have tried several things, which I list below, but no matter what, when I try to finish booting into Ubuntu, I receive the following error: Filesystem check or mount failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and continue booting after re-trying filesystems. Any further errors will be ignored root@ubuntu-computername:~# I have fun fsck -f and everything appears correct, no errors are reported. and it passes all 5 checks. If I run fdisk -l then I get the following information: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes Disk identifier: 0x00010824 Device Boot Start End Blocks Id System /dev/sda1 * 2048 608456703 304227328 83 Linux /dev/sda2 608458750 625141759 8341505 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 608458752 625141759 8341504 82 Linux swap / Solaris Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0fb4b7e8 Device Boot Start End Blocks Id System /dev/sdb1 8192 625139711 312565760 7 HPFS/NTFS/exFAT I am considering just installing a new OS on the other disk, that currently has nothing on it, and then just attempting to scrape my data off the old disk (thankfully I didn't encrypt the files). Really my question is this: Can I salvage this Ubuntu install, or should I give up and just reinstall?

  Read the article

• Apt-Get "sources.list needs at least 1 source-URI" error when building dependecies for Xen

  - by Entity_Razer

  What i'm trying to do is install Xen in a test environment, now I am trying to run the: apt-get build-dep xen-3.3 command, but it keep throwing a error which literally translated from dutch (installed the debian OS in Dutch) say's: E: your sourcelist (/etc/apt/sources.list) has to contain at least 1 source-URI I've googled it but I can't seem to find a definitive solid answer on how to fix this. By default a source-URI (read man page of apt-get) states it needs to be something along the lines of deb ftp://ftp.debian.org/debian stable contrib Now I've got 2 HTTP sources (default Debian ones) up & running so far and they've been working flawlessly for the better part of a few days now. Only now its starting to act up. Anyone able to help me out ? Much obliged !

  Read the article

• Apache virtual hosts - Resources on website not loaded when accessed from other hostname than localhost

  - by Christian Stadegaart

  Running virtual hosts on Mac OS X 10.6.8 running Apache 2.2.22. /etc/hosts is as follows: 127.0.0.1 localhost 3dweergave studio-12.fritz.box 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost Virtual hosts configuration: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot "/opt/local/www/3dweergave" ServerName 3dweergave ErrorLog "logs/3dweergave-error_log" CustomLog "logs/3dweergave-access_log" common <Directory "/opt/local/www/3dweergave"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost *:80> ServerName main </VirtualHost> This will output the following settings: *:80 is a NameVirtualHost default server 3dweergave (/opt/local/apache2/conf/extra/httpd-vhosts.conf:21) port 80 namevhost 3dweergave (/opt/local/apache2/conf/extra/httpd-vhosts.conf:21) port 80 namevhost main (/opt/local/apache2/conf/extra/httpd-vhosts.conf:34) I made 3dweergave the default server by putting it first in the list. This will cause all undefined virtual hosts' names to load 3dweergave, and thus http://localhost will point to 3dweergave. Of course, normally, the first in the list is the virtual host main and localhost will point to main, but for testing purposes I switched them. When I navigate to http://localhost, my CakePHP default homepage shows as expected: Screenshot 1 But when I navigate to http://3dweergave, my CakePHP default homepage doesn't show as expected. It looks like every relative link to resources are not accepted by the server: Screenshot 2 For example, the CSS isn't loaded. When I open the source and click on the link, it opens the CSS file in the browser without errors. But when I run FireBug while loading the webpage, it seems that the CSS file isn't retrieved. (<link rel="stylesheet" type="text/css" href="/css/cake.generic.css" />) How can I fix this unwanted behaviour?

  Read the article

• What software can copy the whole hard drive with Operating System to DVD-R, and be able to "refresh

  - by Jian Lin

  What software can take a snapshot of a Win XP or Win 7 machine -- burning all files into a DVD-R, and then be able to boot from that DVD-R can restore the whole machine back to that state stored inside the DVD-R? Maybe for Win XP, it is easier as the OS can be just 1 or 2GB on the hard drive, but for Win 7, a fresh installation is already 16GB on the hard drive, so it will need several DVD-R to take the snapshot? thanks. (any of these software are open source?)

  Read the article

< Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445  | Next Page >