Search Results

Search found 15591 results on 624 pages for 'problems'.

Page 443/624 | < Previous Page | 439 440 441 442 443 444 445 446 447 448 449 450  | Next Page >

• Motherboard running rather hot while gaming

  - by I take Drukqs

  Case: Antec 1200 Mobo: Gigabyte GA-X58A-UD3R CPU: Intel i7 950 (stock cooler) GPU: EVGA GeForce 570 GTX RAM: 2x 2 GB (4 GB total) DDR3 dual-channel Corsair OS: Windows 7 Home Premium 64-bit This is my first build and it's brand new. I had no problems putting it all together in a few hours one evening and I consider myself to be pretty good with computers. Not to brag or anything like that! Just saying I've been fiddling with them since I was in diapers and I have a good amount of experience under my belt, just not with certain things yet. Recently while playing many of the latest games maxed out without a hitch my motherboard has been running hot and like anyone who's ever built a computer it scares the life out of me. I checked HWMonitor and saw that my motherboard sometimes reached temperatures of around 52 - 78c (the number 78 obviously being what's scaring me). I was wondering if such a temperature is normal and if not what the problem could be. Air flow in my case is phenomenal and besides having to ship back a faulty GPU and reseat my CPU my first build has been a very large success which I am enjoying tremendously. There is literally almost no dust in my case due to it being very new as previously mentioned and my RAM sticks are in the correct slots for dual-channel mode. My cable management is pretty great in my opinion with only cables from my PSU lingering in the bottom of the case. At any given opportunity I ran my cables behind my mobo. Air flow should definitely not be a problem because my CPU only goes up to about 60c and my GPU only goes up to about 80c. Thank you very much in advance.

  Read the article

• CentOS Installation on a Cisco MCS 7800

  - by William

  I'm having some problems installing CentOS 5.5 Final (i386) onto my server, a Cisco MCS 7800. The problem comes very early into the installation. When the welcome screen comes up and gives you the option on how to boot into the DVD, I'll press enter to go into the graphical installer. The screen will then have a blinking cursor in the top left of the screen and will never go away (I thought that it just might need time but I let it sit for over 5 hours). I then booted into it again and tried using Linux Text thinking it was a problem with the graphical installer. That didn't work, same problem. Then I tried a DVD of RHEL 5 and got the same problem, both graphical and Linux text. At this point I think it's a hardware problem. The server has 2GB of ECC RAM, 1 Pentium 4 CPU @ 3.06GHZ and 2 WD Hard Drives (80GB) configured for RAID 0. (There is also an option in the BIOS for what OS type and that is set to Linux.) If anyone has any idea what is going on, it would be helpful. Edit Typing "text" doesn't change a thing. Still stuck at the blinking cursor. I looked it up and it's really the same thing as typing "linux text", which as stated in the first part of my question, I've already done.

  Read the article

• Jenkins CI - Cannot allocate memory

  - by Programmieraffe

  I tested jenkins-ci successfully on a ubuntu 10.4 (with vmware fusion) on my local computer. Now I want to install and use it on my virtual server at hosteurope. The basic installation was no problem, but now I have problems with my build project. After pulling an mercurial update from a repository, ant is invoked and throws the following error in my build project: "Buildfile: /var/lib/jenkins/workspace/concrete5-seed-clean/build.xml [property] java.io.IOException: Cannot run program "/usr/bin/env": java.io.IOException: error=12, Cannot allocate memory" There is a known problem with heap size at virtual servers at hosteurope (http://faq.hosteurope.de/index.php?cpid=13918), so I tried to set the heap size manually: # for ant export ANT_OPTS="-Xms512m -Xmx512m" # jenkins # edited /etc/default/jenkins, added line JAVA_ARGS="-Xms512m -Xmx512m" # restarted jenkins via /etc/init.d/jenkins restart After setting this for ant, the command "ant -diagnostics" runs through and does not cause an error, but the error still occurs when I try to build the project. Server-Details: - http://www.hosteurope.de/produkt/Virtual-Server-Linux-L Ubuntu 10.4 LTS RAM: 1GB / Dynamic 2GB My questions: - Is 1GB enough for Jenkins or do I have to upgrade the server? - Is this error caused by ant or jenkins? Update: I got it running with ant options -Xmx128m -Xms128m, but sometimes the error occurs again. (this freaks me out, cause i can not reproduce it by now :/ ) Help much appreciated! Cheers, Matthias

  Read the article

• Clustering filesystem for small files

  - by viraptor

  Hi, I'm looking for a distributed filesystem which I could use for storing lots of small files (<1MB usually). What I want to get is: 2 servers which have the fs mounted themselves and mirror the data locking support (among reachable nodes) some kind of best-effort automatic resynchronisation after one node goes down and comes back again What I mean by the resync is that, I'm ok with both servers doing read/write operations even if they split-brain. I'm also ok if a local process obtains a lock if the other host is not reachable. From the resync I expect only a file-level consistent view after a while - that is - if file x is modified on both nodes during a split-brain, I don't really care which one is available after they join again, as long as it's full file, not one block coming from node1 and another block from node2. Is there a solution like that out there? I see that gluster has some problems with file locks (even in 3.1). I also noticed that OCFS2 will panic if both nodes split-brain. What other filesystem would allow me to do what I want?

  Read the article

• Laptop Acer Travelmate 4050 takes over 10 Mins to POST

  - by Belliez

  Hi, I am a computer tech and have received a laptop for repair. I noticed when I turned it on the laptop would not do anything for a min or two (the fan would run up and stop, power led would shine and some cd rom activity then stop). It would sit there with a black screen. Suddenly after a random number of minutes (between 1-20mins!) the Acer BIOS screen would display and POST would happen before booting into Windows XP. It has frozen in XP at various times and pointed towards a CPU fault and over heating. The fan was on its last legs, sounded like a car engine, so I replaced this. Still same issues. I next replaced the CPU like for like. Same problems. Also applied new thermal paste between the cpu and heatsink, when running the fan kicks in occasionally (not as often as I thought it would) and I left it playing mp3, online radio and updating to service pack 3 and it wouldnt freeze. shutting down ok, cold start, not ok. Waits again before showing the BIOS screen. The hard disk was also making a screaming noise (SMART test and chkdsk passed) but I also replaced this. The laptop powers up with and without the battery so dont think its a battery issue. Running out of ideas and wondered if anyone had any advice. Thanks

  Read the article

• LG W3000H-BN monitor cannot go above 1280x800

  - by Jo Profit

  I noticed that there are many people complaining about this issue with the W3000H but I have yet to find a solution that works for me. I am using Windows 7 Professional and and using a nVidia Quadro NVS 240 video card with a 4 monitor splitter cable. The cable from the monitor and the splitter are rated DVI-D Dual Link and the video card itself is rated for 2560x1600. I have installed the latest drivers for the video card and just grabbed the .inf, icm and cat file from the LG website and manually installed the monitor drivers. Does anyone have problems with the same setup? I have 3 other monitors (2 at 1920x1080 and 1 at 1280x1024). I really would like to be able to display the full resolution or else the large screen is useless. (I triple checked that the monitor itself supports this resolution). So monitor, cable, splitter and card supposedly support 2560x1600. Drivers are up to date but I cannot select that resolution when in the "Screen Resolution" menu, nor through the nVidia control panel. Please save me from madness :)

  Read the article

• Why Ubuntu could treat hosts file so strange?

  - by z4y4ts

  I have almost fresh Ubuntu desktop box. OS was installed two weeks ago and updated from karmic repositories. Last week I had no problems with DNS. But this week something had changed. I'm not sure what and when, and not sure whether I changed any configs. So now I have some really weird situation. According to logs name resolving should work normally. /etc/hosts 127.0.0.1 localhost test 127.0.1.1 desktop /etc/host.conf order hosts,bind multi on /etc/resolv.conf # Generated by NetworkManager search search servers obtained via DHCP nameserver 192.168.0.3 /etc/nsswitch.conf passwd: compat group: compat shadow: compat hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis But if fact it is not. user@test ~ping test PING localhost (127.0.0.1) 56(84) bytes of data. [skip] Pinging is ok. user@test ~host test test.myviacube.com has address xx.xxx.161.201 But pure I suspect that NetworkManager might cause this misbehavior, but don't know where to start to check it. Any thoughts, suggestions?

  Read the article

• Hyper-V Virtual Machine won't respond over network

  - by Brad Gignac

  Recently, one of our Hyper-V virtual machines has periodically stopped responding over the network. It seems to be happening every few days, and it occasionally happens up to several times a day. I am by no means a sysadmin, so any direction you guys could provide would be very welcome. I've included everything I know to include below. If you need any additional information, I'll be glad to include it. I can connect through the Hyper-V console. I can't connect to network shares, IIS web apps, using RDP, or using ping. Memory usage seems to be normal (3 of 4 GB) Processor usage seems low. We don't know the exact time the server goes down, but the following error appears consistently around the time it goes down: Error 5719, NETLOGON This computer was not able to set up as secure session with a domain controller in domain *** due to the following: There are currently no logon servers available to service the logon request. This may lead to authentication problems. Make sure that this computer is connected to the network. If this problem persists, please contact your domain administrator.

  Read the article

• Can Vista Windows Explorer be repaired/fixed?

  - by gurun8

  I'm running Windows Vista Home Premium on a Sony Vaio laptop. I think somehow my Windows Explorer has become corrupted. I don't recall any certain inciting incident like installing an unreputable 3rd party app or hardware failure but just recently my system won't wake after it's been left idle longer that 20 minutes and goes to sleep. I've also had problems launch certain apps, like Adobe InDesign CS3, that just basically freeze the system but leave mouse movements functioning for a short time before freezing the entire system which requires a hard reboot to resolve the freeze. The system seems to run normally when used but I fear there's a looming possibility that this is a house of cards and will all come crashing down soon. My question is this, can Windows Explorer be repaired/fixed? Before reformatting the system and starting over, which is most likely what I'm going to be forced to do, I'd like explore (no pun intended) my options in fixing the problem with a patch or reinstall or something of that nature. Reformatting my system will eat up a day or two of my time and I just don't have the time to spare right now.

  Read the article

• XP Pro freezes on welcome screen

  - by Peter B

  I have a problem that sounds much the same as http://superuser.com/questions/83101/how-to-diagnose-a-freeze-on-startup-in-windows-xp About every 2nd or 3rd boot, XP-Pro freezes on the Welcome page (the one showing the user name icons). The mouse moves the cursor OK, but clicking on an icon does nothing, and neither does any keystroke. If you press too many keys there is a beep and after that the mouse won't move the cursor anymore. The work-around is always to reboot into Safe mode and request a CHKDSK /R After this, the next boot is fine. There are no related entries in the Event log when the problem occurs. The only two entries are: "Microsoft (R) Windows (R) 5.01. 2600 Service Pack 3 Multiprocessor Free." "The Event log service was started." Update 1: Many thanks for that but I found no problems with any diagnostics I have run. But, I have managed to locate, and code round, the source of the problem - which is with whatever processing goes on behind the XP Welcome (as opposed to "classic") login screen. Unfortunately, having classic login means you don't get the useful Fast User Switching (FUS) login/switch mode. So, to retain this, my fix is: Add a Windows shutdown script (using gpedit.msc) to force "classic" mode for the first logon after next XP startup, by running: reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v LogonType /t REG_DWORD /d 0 /f Add a Scheduled Task to run at User Logon that enables Welcome screen (and hence FUS) by running the same command with 1 instead of 0 after the /d flag. The task is run as a privileged user (who can run "reg add").

  Read the article

• Intermittent NFS lockups on Isilon cluster

  - by blackbox222

  We have an Isilon cluster with 8 IQ 12000x nodes which exports storage via several NFS shares for a handful of Linux and Solaris clients. There is a Linux system that has one of these NFS filesystems mounted. I/O to this filesystem is moderately heavy from the Linux system. Every 3-4 weeks (it's not on any kind of discernible schedule, and sometimes is more/less frequent than this), we notice that all activity ceases on this NFS mount (the process hangs, as if the network stopped working so process is stuck in uninterruptible sleep) - 30 minutes later, the share recovers and things continue to work normally. The kernel log from the affected machine is as follows: Dec 3 10:07:29 redacted kernel: [8710020.871993] nfs: server nfs-redacted not responding, still trying Dec 3 10:37:17 redacted kernel: [8711805.966130] nfs: server nfs-redacted OK relevant /etc/fstab line: nfs-redacted:/ifs/nfs/export_data/shared/...redacted... /data nfs defaults 0 0 I've checked to see if there are any scheduled processes e.g. cron jobs, Isilon related functions e.g. snapshots, etc that might be causing these hangups but I can't seem to find anything. I'm also not aware of any network related issues or maintenance that would cause this. All of the lockups last almost exactly 30 minutes per the kernel logs. Perhaps someone has some suggestions I could try? (I considered a soft mount to avoid the problems associated with processes accessing the filesystem hanging; however am wary of the corruption that could result and it would not really solve the underlying issue anyway).

  Read the article

• Mac updated just now, postgres now broken

  - by Dave

  I run postgres 9.1 / ruby 1.9.2 / rails 3.1.0 on a maxbook air for local dev. It's all been running smoothly for months, (though this is the first time I've done development on a mac.) It's a macbook air from last year, and today I got the mac osx software update message as I have a few times before, and my system downloaded approx 450mb of updates and restarted. It now says it's on OSX 10.7.3. Point is, postgres has stopped working, when I start my thin server (mirror heroku cedar) as normal, and then browse to my rails app I get: PG::Error could not connect to server: Permission denied Is the server running locally and accepting connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"? What happened? After browsing around a few questions I'm still confused, but here's some extra info: Running psql from command line gives same error I can run pgadmin 3 and connect via it and run SQL no problems Running which psql shows the version as /usr/bin/psql I created a PostgreSQL user back when I got the mac (it's always been on lion) I've no idea why, almost certainly I was following a tutorial which I neglected to store in my notes. Point is I am aware there is a _postgres user as well. I know it's rubbish, but apart from a note on passwords, I don't have any extra info on how I configured postgres - though the obvious implication is that I did not use the _postgres user. Anyone have suggestions or information on what might have changed / what I can try to debug and fix? Thanks. Edit: Playing around based on this question and answer: http://stackoverflow.com/questions/7975414/check-status-of-postgresql-server-mac-os-x, see this string of commands: $ sudo su postgreSQL bash-3.2$ /Library/PostgreSQL/9.1/bin/pg_ctl start -D /Library/PostgreSQL/9.1/data pg_ctl: another server might be running; trying to start server anyway server starting bash-3.2$ 2012-04-08 19:03:39 GMT FATAL: lock file "postmaster.pid" already exists 2012-04-08 19:03:39 GMT HINT: Is another postmaster (PID 68) running in data directory "/Library/PostgreSQL/9.1/data"? bash-3.2$ exit

  Read the article

• Is there a way to run CUDA applications with the CUDA device being a secondary adapter?

  - by Slartibartfast

  I've been trying to run a CUDA program on a remote computer which has Windows 7 installed. The GPU is GeForce GTX 480. One of the problems I've been facing is that, the computer has two adapters, 1) Standard VGA Adapter 2) NVIDIA GeForce GTX 480 Even though this shows in the device manager. The desktop uses the standard VGA Adapter. I'm assuming this is because the Standard VGA is the primary adapter. Also the device manager shows that the monitor is connected to the standard VGA Adapter. In this scenario if i try to run any CUDA application it fails to recognise a CUDA capable device. Is it necessary for the NVIDIA adapter to be the primary one? Or is there any way to use CUDA when the graphics card is a secondary adapter. I've seen a few posts in the NVIDIA forums on this before, one suggests using another low cost NVIDIA card as the primary adapter, but that is currently not an option. I couldn't find any other solutions. Thanks I tried running the deviceQuery test from the NVIDIA GPU Computing Samples. This was the result i obtained CUDA Device Query (Runtime API) version (CUDART static linking) cudaGetDeviceCount FAILED CUDA Driver and Runtime version may be mismatched FAILED The driver version I'm using is 263.06. The CUDA version is 3.2 I ran the same test on my desktop which also has windows 7 and a GeForce GTX 465. The CUDA toolkit version is 3.2. The driver version was the same and the test passed, although it failed with an older driver.

  Read the article

• How to troubleshoot when one has no idea where to start?

  - by Chris Walton

  I am looking for hints, tips and answers on how to get started on troubleshooting when: The problem is intermittent The problem could lie literally anywhere - operating system; free source software; my own software developments; purchased software; crumbs on the keyboard; the specific combination of software I am currently running; Maxwell's demon; the little blue men actually running the machine have gone on strike; etc. I have expertise only in a few of the areas that are potential candidates for the cause of the problem. The specific problem I am having is detailed below as an example, but I am not seeking answers to my current problem, but rather where and how to start on tackling such problems. I am currently encountering a problem with my new machine. On a few occasions the machine has just frozen; not accepting keystrokes, mouseclicks, or anything except the power on/off switch. Invariably I have been merely browsing the web; I have had a few (<= 6 other applications) running. None of these applications are major; and represent a mix of commercial programs and open source programs, typically migrated from Unix of some variety. My machine is a Windows 7 I7 quad core laptop.

  Read the article

• Update BIOS on Sun Fire X4150 server

  - by Massimo

  I have some Sun Fire X4150 servers with a very old BIOS release (1ADQW015), which seems to have some compatibility problems with WMware ESX Server 3.5 and Windows 2008 R2 virtual machines; so I want to update the BIOS on them. The problem: according to this page, if your servers run ELOM (mine do), you first need to update to the latest ELOM release, then to the interim transition release, then finally you can update to the latest one. Ok, I'm willing to do that... but it looks like Sun (now Oracle) will happily let you download the latest firmware DVD (3.3.0), but it will not let you download the transition release (2.0) if you don't have a support contract. Well, I actuall don't care at all about the servers' management controllers (we don't even use them), so upgrading from ELOM to ILOM is totally irrelevant to me; but I need to update the servers' BIOS. So my question is: can I update the servers' BIOS to the latest version without doing the full ELOM-to-ILOM migration, or will this not work (or even make the servers unusable)? Do BIOS versions and SP ones need to be matched, or can one be updated without bothering with the other? Bonus question: if this whole ELOM-to-ILOM thing actually is needed in order to update the BIOS, can that 2.0 CD-ROM be obtained without having a support contract with Sun/Oracle (which we are definitely not going to sign, being that quite old hardware)? Update: I tried upgrading only the BIOS on one of the servers, and it didn't boot anymore. So it really looks like a full firmware upgrade is needed, and the management controller and BIOS versions should be kept in sync. So... where can I find that *&!£%$% 2.0 CD-ROM? Or at least the transition firmware that can be found on it?

  Read the article

• Team Foundation Server 2008 - TF220056 Error during installation

  - by David

  I'm attempting to install Team Foundation Server 2008 on a Windows Server 2003 instance that exists under Hyper-V. The SQL Server database itself is held on the root partition of the Hyper-V server and has the Reporting Services installed (so I've solved the TF220059 error already). After hitting "Next " after typing the name of the SQL Server I get this error: --------------------------- Microsoft Visual Studio 2008 Team Foundation Server Setup --------------------------- TF220056: An unrecoverable error occurred while trying to check the status of the Team Foundation database. Installation cannot continue. Check the install log for more details. --------------------------- OK --------------------------- The error log's stack trace makes it look like a bug in the TFS installer itself: [03/22/10,19:14:42] TFSUI: [2] tfsdb.exe: System.IO.IOException: The directory name is invalid. [03/22/10,19:14:42] TFSUI: [2] tfsdb.exe: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) [03/22/10,19:14:42] TFSUI: [2] tfsdb.exe: at System.IO.__Error.WinIOError() [03/22/10,19:14:43] TFSUI: [2] tfsdb.exe: at System.IO.Path.GetTempFileName() [03/22/10,19:14:43] TFSUI: [2] tfsdb.exe: at Microsoft.TeamFoundation.DatabaseInstaller.CommandLine.Commands.InstallerCommand.get_Log() [03/22/10,19:14:43] TFSUI: [2] tfsdb.exe: at Microsoft.TeamFoundation.DatabaseInstaller.CommandLine.Commands.InstallerCommand.Run() [03/22/10,19:14:43] TFSUI: [2] tfsdb.exe: at Microsoft.TeamFoundation.DatabaseInstaller.CommandLine.CommandLine.RunCommand(String[] args) [03/22/10,19:14:43] TFSUI: [2] tfsdb.exe: The directory name is invalid. [03/22/10,19:14:43] TFSUI: [2] tfsdb.exe check failed with error code: 100 I'm running the installer as the domain Administrator, although the server is a Terminal Server in Application Mode, might that be the cause of the problems?

  Read the article

• "Server Unavailable" and removed permissions on .NET sites after Windows Update

  - by tags2k

  Our company has five almost identical Windows 2003 servers with the same host, and all but one performed an automatic Windows Update last night without issue. The one that had problems, of course, was the one which hosts the majority of our sites. What the update appeared to do was cause the NETWORK user to stop having access to the .NET Framework 2.0 files, as the event log was complaining about not being able to open System.Web. This resulted in every .NET site on the server returning "Server Unavailable" as the App Domains failed to be initialise. I ran aspnet_regiis which didn't appear to fix the problem, so I ran FileMon which revealed that nobody but the Administrators group had access to any files in any of the website folders! After resetting the permissions, things appear to be fine. I was wondering if anyone had an idea of what could have caused this to go wrong? As I say, the four other servers updated without a problem. Are there any known issues involved with any of the following updates? My major suspect at the moment is the 3.5 update as all of the sites on the server are running in 3.5. Windows Server 2003 Update Rollup for ActiveX Killbits for Windows Server 2003 (KB960715) Windows Server 2003 Security Update for Internet Explorer 7 for Windows Server 2003 (KB960714) Windows Server 2003 Microsoft .NET Framework 3.5 Family Update (KB959209) x86 Windows Server 2003 Security Update for Windows Server 2003 (KB958687) Thanks for any light you can shed on this.

  Read the article

• Installing Joomla on Windows Server 2008 with IIS 7.0

  - by Greg Zwaagstra

  Hi, I have been spending the past while trying to install Joomla on a server running Windows Server 2008. I have successfully installed PHP (using Microsoft's web tool for installing PHP with IIS) and MySQL and am now trying to run the browser-based installation. Everything comes up green, I fill in the appropriate information regarding the site name, MySQL information, etc. and no errors are thrown. However, when I get to the step that asks me to remove the installation directory, I am unable to do so as Windows states it is in use by another program (I cannot fathom how this is true). Also, there is no configuration.php file that is created so if I were to manage to delete this folder I have a feeling that there would be problems. I was thinking there was some kind of a permissions issue and have set the permissions for IIS_IUSRS to have read, write, and execute permissions for the entire folder that Joomla resides in but this has not helped. Any help in this matter is greatly appreciated. ;) Greg EDIT: I decided to try and manually install Joomla by manually editing the configuration.php file. This has worked great and now I am certain there is some kind of a permissions issue going on because I am able to do everything that involves the MySQL database (create an article, edit menu items, etc.), but anything that involves making changes to Joomla installation's directory does not work (install plugins, edit configuration settings using the Global Configuration menu within Joomla, etc.) I have granted IIS_IUSRS every permission except Full Control (reading on the Joomla! forums shows that this should be enough for everything to work). This is confusing to me and I am quite stuck on this problem. EDIT 2: The bizarre thing is that in the System Info under Directory Permissions, everything turns up as Writable but then whenever I try to actually use Joomla to, for example, edit the configuration.php file using the interface, it says it is unable to edit the file.

  Read the article

• Need help using a super scope

  - by Vdub

  I have a windows server 2008 r2 standard running our DCHP, DNS, and AD. also I have (3) HP Pro Curve 2510-G switches (J9280A). Right now our LAN is set up 192.168.50.2-192.168.50.254 on our sub-net (A) and another scope with 192.168.51.2-192.168.51.254 sub-net (B) both have sub-net mask of 255.255.255.0. The same server is our DNS which is 192.168.50.242 and our firewall (watchguard) is the gateway at 192.168.50.1. Right now the sub-net (B) does not have DHCP active so only sub-net (A) is giving a pool. My problem is that we are trying to have open WiFi on our network and i am assuming that i can use the sub-net (B) for that if i activate it and use sub-net (A) for our staff only. I have noticed that when i set up a static on a client pc and set it to 192.168.51.x i cannot use the DNS of 192.168.50.242 however i can use 8.8.8.8 and it works fine, i am guessing that because it is on a different sub-net? Forgive me as i am very new at this and dont know a lot. Is there easy way with the equipment i have to a accommodate wifi for hundreds of people without causing problems for our staff? (multiple same IP address assigns) I appreciate any and all info!

  Read the article

• Scriptable BitTorrent clients?

  - by James McMahon

  In an effort further automate all the little computer house keeping tasks that can waste my time I am looking into BitTorrent clients that have the ability to script common tasks. I've done some Googling and it looks like Transmission might have some of said such capabilities, but there site wasn't very clear on the details. Things I am looking to do; Prioritize and label torrents based on trackers Set seed length based on trackers and filesize Set additional seed time when a torrent's seed time expires based on a number of factors, like time spent seeding, remaining disk space and ratio. Move torrents to appropriate places post seeding based on labels and tracker Basically, while I could Python or Bash script things like moving torrents around and other simple actions, I need away to talk to the client to figure out things like the torrent seed time, tracker, labels, filesize, etc. Is there any client out there that would allow me to all or a subset these actions? I have access to Linux, Mac and Windows and am not tied to any particular torrent client. I am a programmer so I have no problems writing scripts, but examples of torrent scripting would also be helpful.

  Read the article

• Laptop shuts down randomly without warning

  - by Robert P.

  My Asus Zenbook UX32V turns off randomly when I'm working on it. This happens both when the computer is recently turned on (5 minutes), and after being on for several days. I'm not running any heavy software The laptop is not heating The fan is not working on the maximum capacity (it's not heating) It happens when the laptop is lying still on the table It is no warning, it simply goes black It happens both when charging and on battery My guess is that it suddenly lose power somehow. What puzzles me is that I can flip the laptop upside down, sideways, shake it, etc. without it shutting off. This makes me think it's not something that's loose causing occasional short-circuits. I realize that the laptop probably doesn't like flipping and shaking, but it was the best way I could troubleshoot. I rarely turn the computer off, only have it in hibernate or sleep mode (most often hibernate). I've never experienced that the laptop is off when I wake it up from sleep mode. I've had the problem for a few months and it happens 2-8 times a week. Specs: Asus Zenbook UX32V Windows 8.1 (it happened in Windows 8.0 too) Intel i5-3317U CPU @ 1.70GHz The laptop is approx 1.5 years, but it has a small dent on one of the sides that probably voids the warranty. The dent has been there since week one and I don't think it's related to the problems I'm having now. Does anyone have a clue what might cause this, and how it might be fixed? I've read all other questions (some of which are listed below) that seem related to my issue, but none report the same behavior as I'm experiencing. Most report heavy games, heating etc. Asus N53J Laptop randomly shuts down Laptop is randomly shutting off Computer shuts down without warning My laptop acer aspire 5720 suddenly turn off randomly Computer randomly shutting down Windows 8.1 randomly shuts self down ASUS K55VM Laptop unexpectedly shuts down

  Read the article

• NAT vs public IP (and blocked ports)

  - by user1646166

  I have a problem with my ISP. They say that they don't block any ports and I have public IP, while I think these both statements are false. Before I talk to them again (which is really tough when my understanding of these terms is different than theirs) I would like to make some things clear. It seems like my computer is behind NAT (is it possible to have public IP and be behind NAT at the same moment?). When I check my IP, through some external server, and type that IP into browser I get a home page of some router (not mine). Isn't that a proof that my IP isn't public? Also, I have problems with making connections via some ports. E.g. when I'm trying to connect through some high port ( 1023) via SSH, it doesn't work. Is it possible that certain range of outgoing ports from my computer are blocked? Or is it simply because that my ssh client (PuTTY) can't receive incoming packets because of blocked incoming ports? To avoid some questions: it's not a problem with my router, I tried connecting my PC directly and it also didn't work, while having connected by 3G using phone with USB tethering, it does work. Thanks!

  Read the article

• SVN Authentication with LDAP and Active Directory

  - by Alex Holsgrove

  I am having a few problems getting SVN authentication to work with LDAP / Active Directory. My SVN installation works fine, but after enabling LDAP in my apache vhost, I just can't get my users to authenticate. I can use a selection of LDAP browsers to successfully connect to Active Directory, but just can't seem to get this to work. SVN is setup in /var/local/svn Server is svn.domain.local For testing, my repository is /var/local/svn/test My vhost file is as follows: <VirtualHost *:80> ServerAdmin [email protected] ServerAlias svn.domain.local ServerName svn.domain.local DocumentRoot /var/www/svn/ <Location /test> DAV svn #SVNListParentPath On SVNPath /var/local/svn/test AuthzSVNAccessFile /var/local/svn/svnaccess AuthzLDAPAuthoritative off AuthType Basic AuthName "SVN Server" AuthBasicProvider ldap AuthLDAPBindDN "CN=adminuser,OU=SBSAdmin Users,OU=Users,OU=MyBusiness,DC=domain,DC=local" AuthLDAPBindPassword "admin password" AuthLDAPURL "ldap://192.168.1.6:389/OU=SBSUsers,OU=Users,OU=MyBusiness,DC=domain,DC=local?sAMAccountName?sub?(objectClass=*)" Require valid-user </Location> CustomLog /var/log/apache2/svn/access.log combined ErrorLog /var/log/apache2/svn/error.log </VirtualHost> In my error.log, I don't seem to get any bind errors (should I be looking elsewhere?), but just the following: [Thu Jun 21 09:51:38 2012] [error] [client 192.168.1.142] user alex: authentication failure for "/test/": Password Mismatch, referer: http://svn.domain.local/test/ At the end of "AuthLDAPURL", I have seen people using TLS and NONE but neither seem to help in my case. I have the ldap modules loaded and have checked as much as I know, so any help would be most welcome. Thanks

  Read the article

• svn post-commit not performing

  - by davin

  ive been sitting on this for about 7 hours, and ive aged close to 7 years... ahhh, server admin does that to me. i have svn wired through apache2 with webdav in the usual manner (basically like http://www.howtoforge.com/setting-up-subversion-with-webdav-post-commit-hook-and-multiple-sites-on-jaunty-jackalope-ubuntu-9.04). ive had endless problems with this (i didnt on my previous ubuntu server install, although this is ubuntu 10.10): this happened, and was fixed like in the post: http://stackoverflow.com/questions/2547400/how-do-you-fix-an-svn-409-conflict-error this looks like my issue, although its not my solution: http://serverfault.com/questions/135494/apache-svn-on-ubuntu-post-commit-hook-fails-silently-pre-commit-hook-permis my commit to svn works (finally). although the post-commit hook which is supposed to svn update the working copy of the repo on the server, doesn't work. the post-commit hook itself executes, and has sudo permissions (as in the setup url above. testing with whoami somelogfile.log or sudo whoami somelogfile.log shows www-data and root, respectively), although it wont perform the svn update (sudo svn update /var/www/gameServer /var/svn/gameServer.log). similar to the serverfault url above, when i perform the exact command it does update the working copy to the latest revision, just not through the post-commit hook. an age old question that is 90% of the time a permissions issue. but in pure frustration i chmod 777 lots of stuff not to mention the fact that www-data is in /etc/sudoer so it shouldnt even need that. im collapsing in front of the screen partly out of frustration and partly out of sleepiness. any direction would be appreciated.

  Read the article

• Postfix qmgr process causes heavy overload on mailservers

  - by Mattias

  We are using Postfix as MTA for our e-mailmarketing software and once in a while we see that the load on one of the mailservers rises above 5. The load is caused by the qmgr-process which is the heart of Postfix and I see that it is consuming a lot of CPU resources. The process seems to be stuck because after 15 minutes it is still doing the samething and still increasing the load. Once I restart the postfix service the load rapidly decreases to below 1 and Postfix continues to send e-mails without any problems. I'm wondering if anyone else has encountered this problem and if people have suggestions on how to prevent it. The problem shows up on all our mailservers but almost never at more than 1 at the time. It seems to be triggered only when we are sending a mailing but the size (10 or 100.000 e-mails doesn't seem to make a difference). It maybe happens once a week or even less often and the time and day is also different every time. We tried to solve the problem by decreasing the amount of messages qmgr is allowed to process but this didn't solve it. We are using Postfix 2.5.5 on Debian Lenny 5.0.8 (postfix is installed through the default Debian repository). No special messages can be found in the logs (syslog, messages, mail.*). Thank you for your time

  Read the article

< Previous Page | 439 440 441 442 443 444 445 446 447 448 449 450  | Next Page >