Search Results

Search found 69128 results on 2766 pages for 'oracle data integrator'.

Page 445/2766 | < Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >

• Setting MTU on Exalogic

  - by csoto

  For many reasons, a system administrator may want to change the MTU settings of a server. But in a system like Exalogic which contains lots of interconnected nodes and other various components, it's important to understand how this applies to the different networks. For example, when bringing up bonding of InfiniBand an error like the following may be thrown: Bringing up interface bond1: SIOCSIFMTU: Invalid argument Both scripts ifcfg-ib0 and ifcfg-ib1 (from the /etc/sysconfig/network-scripts/ direectory) have MTU set to 65500, which is a valid MTU value only if all IPoIB slaves operate in connected mode and are configured with the same value, so the line below must be added to both network scripts and then restart the network: CONNECTED_MODE=yes By the way, an error of the form “SIOCSIFMTU: Invalid argument” indicates that the requested MTU was rejected by the kernel. Typically this would be due to it exceeding the maximum value supported by the interface hardware. In that case you must either reduce the MTU to a value that is supported or obtain more capable hardware. This problem has been seen when trying to modify the MTU using the ifconfig command, like the output of the example below: [root@elxxcnxx ~]# ifconfig ib1 mtu 65520 SIOCSIFMTU: Invalid argument It's important to insist that in most cases the nodes must be rebooted after the MTU size has been changed. Although in some circumstances it may work without a reboot, it is not how it is typically documented. Now, in order to achieve a reduced memory consumption and improve performance for network traffic received on IPoIB related interfaces, it is recommend to reduce the MTU value in interface configuration files for IPoIB related bonds from 65520 to 64000. The change needs to be made to interface configuration files under the /etc/sysconfig/network-scripts directory and applies to the interface configuration files for bonds over IPoIB related slave devices, for example /etc/sysconfig/network-scripts/ifcfg-bond1. However, keep in mind that the numeric portion of the interface filenames that corresponding to IPoIB interfaces is expected to vary across compute nodes and vServers and so cannot be relied upon to identify which interface files are for bonds are over IPoIB rather than EoIB related slave interfaces. To fix these MTU values to the recommended settings, there are very useful instructions and a script on the MOS Note 1624434.1, and it's applicable physical and virtual configurations of Exalogic. Regarding the recommended MTU value for EoIB related interfaces, its maximum appropriate value is 1500. If for some reason a vServer has been created with a higher value (set on the /etc/sysconfig/network-scripts/ifcfg-bond0 file), then it must be fixed. An error like the following could be thrown under this circumstance: [root@vServer ~]# service network restart ... Bringing up interface bond0:  SIOCSIFMTU: Invalid argument Also an error like the one below can be seen on the /var/log/messages file of the vServer: kernel: T5074835532 [mlx4_vnic] eth1:vnic_change_mtu:360: failed: new_mtu 64000 2026 The MOS Note 1611657.1 is very useful for this purpose.

  Read the article

• What are the most known arbitrary precision arithmetic implementation approaches?

  - by keykeeper

  I'm going to write a class library for .NET which provide an implementation of arbitrary precision arithmetic for integer, rational and maybe complex numbers. What best known approaches should I become familiar with? I tried to start with Knuth's TAOCP Vol.2 (Seminumerical Algorithms, Chapter 4 – Arithmetic) but it's too complicated. At least I couldn't get the ideas in a relatively short period of time.

  Read the article

• Basic is Best

  - by Eric A. Stephens

  Fellow foodies will recognize the recent movement towards "farm-to-table" restaurants. These venues attempt to simplify their menus and source ingredients as close to the source as possible. I had the opportunity to dine at such a restaurant the other evening. I was gushing about the appetizer to my server when she described the preparation for the item and then punctuated her comments with "basic is best". I reminded my fellow enterprise architect diners there was an architecture lesson in that statement. They rolled their eyes and chuckled. But they also knew I was right. I'm reminded of Frederick Brooks' book The Mythical Man Month and his latest The Design of Design. The former must read book talks about complexity. But he refrains from damning all complexity. The world we live in and enterprises we strive to transform with enterprise architecture are complicated organisms, much like the human body. But sometimes a simple solution is the best approach. Fewer applications (think: portfolio rationalization). Fewer components. Fewer lines of code. Whatever level of abstraction you are working at, less is more. I'm reminded of the enterprise architecture principle "Control Technical Diversity". At one firm I created pithy catch phrases for each principles. I named this one "Less is More". But perhaps another variation is what my server said the other night, "Basic is Best".

  Read the article

• How to deal with MySQL Connector/ODBC error "Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'"

  - by user12653020

  I am sure many users run into a mysterious problem when perfectly working ODBC configurations started failing with errors like: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' The above error message might be preceded with something like [nxDc[yQ]. At the same time odbc.ini specifies in its DSN different SOCKET=/tmp/mysql.sock or a TCP connection SERVER=<remote_host_or_ip>. The question is, what had happened that the ODBC driver started to ignore the DSN options? The clue lies in the corrupted string [nxDc[yQ], which actually was [UnixODBC][MySQL] with each 2nd symbol removed. This is the case of bad conversion from SQLCHAR to SQLWCHAR. The UnixODBC driver manager took a single-byte character string from the client application and tried to convert it into the wide (multi-byte) characters for the Unicode version of MyODBC driver: Initially the piece of the connection string was represented by 1-byte chars like: [S][E][R][V][E][R][=][m][y][h][o][s][t][;] after the bad conversion to wide chars (commonly 2-byte UTF-16) [SE][RV][ER][=m][yh][os][t;] instead of [S\0][E\0][R\0][V\0][E\0][R\0][=\0][m\0][y\0][h\0][o\0][s\0][t\0][;\0] Naturally, the MyODBC driver could not parse the bad string and tried to use the default connection type (SOCKET) with the default value (/var/lib/mysql/mysql.sock) Now we know what happened, but why it happened? In most cases it happened because of using ODBCManageDataSourcesQ4 utility or its older analog ODBCConfig. When registering ODBC drivers they put lots of additional options and one of these options badly affects the UnixODBC driver manager itself. The solution is simple - remove or comment out the option in odbcinst.ini file (it is empty by default) set for the driver: [MySQL ODBC 5.2.6 Driver] Description    = Driver         = /home/dbs/myodbc526/lib/libmyodbc5w.so Driver64       = /home/dbs/myodbc526/lib/libmyodbc5w.so Setup          = /home/dbs/myodbc526/lib/libmyodbc5S.so Setup64        = /home/dbs/myodbc526/lib/libmyodbc5S.so UsageCount     = 1 CPTimeout      = 0 CPTimeToLive   = 0 IconvEncoding  =  # <--------- remove this line Trace          = TraceFile      = TraceLibrary   = After applying this simple solution (remove the line with IconvEncoding = ) everything came to normal. Prior to removing that line I tried putting different encoding names there, but the result was not good, so I really don't know how to properly use it. Unfortunately, UnixODBC manuals say nothing about it. Therefore, removing this option was the only way to get things done.

  Read the article

• Advice for migrating email server

  - by Chris Adams

  Hi there, I'm planning to migrate a Zimbra server with about 200gb of data from a server hosted in an office into a datacentre, to increase uptime (we've had a couple of outages when our network here started flaking out, and we have people in other countries relying on this server too). However, I'm not sure how best to migrate the data into the data centre without rendering the connection unusable during office hours, because there's far too much to send in over night over the two meg upstream connection we have here. I'm familiar with using tools like nice to stop a long running process degrading machine performance - is there a simple way to throttle a connection between office hours, so the long running transfer doesn't block the pipe, but then opens up outside of office hours to make the most of the bandwidth? I'm aware the alternative here is to simply mail a hard drive to the data centre, but I'd like to avoid doing that if I could. We're using Centos Linux for our servers, in the office and the datacentre, so extra points for an open source linux answer.

  Read the article

• How to name setter that does data conversion?

  - by IAdapter

  I'm struggling with how to name this method, I don't like the "set" prefix, because I feel it should be reserved for normal "dumb" setters and some tools might not like it (i did not check it in checkstyle, pmd, etc., but I got a feeling they won't like it.) for example (in java, but I feel its language agnostic) public void setActionListenerClicked(boolean actionListenerClicked) { this.actionListenerClicked = actionListenerClicked ? "1" : "0"; } The only purpose of this method is ONLY to set, this method is needed and cannot be joined with any other (because of framework used). P.S. I DO know that question is similar to How to name multi-setter?, but I feel its not the same question.

  Read the article

• Facial Recognition for Retail

  - by David Dorf

  My son decided to do his science project on how the brain recognizes faces.  Faces are so complicated and important that the brain has a dedicated area for just that purpose.  During our research, we came across some emerging uses for facial recognition in the retail industry. If you believe the movies, recognizing faces as they walk by a camera is easy for computers but that's not the reality.  Huge investments are being made by the U.S. government in this area, with a focus on airport security.  Now, companies like Eye See are leveraging that research for marketing purposes.  They do things like track eyes while viewing newspaper ads to see which ads get more "eye time."  This can help marketers make better placement and color decisions. But what caught my eye (that was too easy) was their new mannequins that watch shoppers.  These mannequins, being tested at European retailers like Benetton, watch shoppers that walk by and identify their gender, race, and age.  This helps the retailer better understand the types of customers being attracted to the outfit on the mannequin.  Of course to be most accurate, the software has pictures of the employees so they can be filtered out.  Since the mannequins are closer to the shoppers and at eye-level, they are more accurate than traditional in-ceiling LP cameras. Marketing agency RedPepper is offering retailers the ability to recognize loyalty shoppers at their doors using Facedeal.  For customers that have opted into the program, when they enter the store their face is recognized and they are checked in.  Then, as a reward, they are sent an offer on their smartphone. It won't be long before retailers begin to listen to shoppers are they walk the aisles, then keywords can be collected and aggregated to give the retailer an idea of what people are saying about their stores and products.  Sentiment analysis based on what's said or even facial expressions can't be far off. Clearly retailers need to be cautions and respect customer privacy.  That's why these technologies are emerging slowly.  But since the next generation of shoppers are less concerned about privacy, I expect these technologies to appear sporadically in the next five years then go mainstream.  Time will tell.

  Read the article

• Ignite Google I/O: Digital Art, Data, Wave & Cheezburgers

  I'm returning to host Ignite at Moscone West for the third Google I/O on Wednesday at 4pm PST (here's the wave ). The short talks will be a...

  Read the article

• The Softer Side of Customer Experience

  - by Christina McKeon

  It’s election season in the U.S., and you know what that means. It means I stop by the recycling bin in my garage before entering the house with the contents of my mailbox. A couple of weeks ago, I was doing my usual direct mail purge when I came across a piece from The Container Store®. This piece would have gone straight to the recycling bin, but the title stopped me: Learn what WE STAND FOR! Under full disclaimer, I’m probably a “frequent flier” at The Container Store. One can never be too organized! Now, back to the direct mail piece. I opened it to discover that The Container Store has taken their customer experience beyond “a shopping experience that makes you smile” to giving customers more insight and transparency into how they feel about their employees, the vendors they partner with, and the communities they live in. The direct mail piece included several employees showcasing a skill, hobby or talent with their photo and a personal note that used one word to describe what these employees believe The Container Store stands for. I do not recall the last time I read through an entire piece of direct mail. But this time, I pored over all the comments and photos.  Summer, a salesperson, believes that one word is PASSION. Thomas in distribution center inventory systems chooses the word ACTION. The list goes on to include MATCHLESS, FUN, FAMILY, LOVE, and EMPOWERMENT. The Container Store is running a contest asking you to tell them what nonprofit organization you stand for. Anyone can submit their favorite nonprofit to win cash, products and services from The Container Store. Don’t forget about the softer side of customer experience. With many organizations working feverishly to transform their business into being more customer-centric, it’s easy to get caught up in processes and technology. Focusing on people and social responsibility often falls behind and becomes a lower priority. Keeping people and social responsibility at the forefront is crucial. Your customers will use your processes and technology, but they will see or hear your people and feel their passion. The latter is what they will remember most about your brand. I’m sure there are many other great examples of the softer side of customer experience. Please share your examples in the comments section.

  Read the article

• backup and file server for 50+ TB of data

  - by a-bomb

  our office wants to build a new server to handle our data, over the last 10 years our data was stored on CDs, DVDs, HDDs but now they want all of it in one place that is attached to the network for everybody in the office to access it. the data is 20TB new data and the rest is old, the important now is to store these 20tb and gradually store the other 30tb over time. so what is the best solution to do ? we thought of getting an hp server and connect it to an external enclosure that either had tape drives or HDDs (we haven;t decided yet) or to get a NAS server and connect it to the hp server. what should we do because this is new for us ...

  Read the article

• Tech Article: Tired of Null Pointer Exceptions? Use Java SE 8's Optional!

  - by Tori Wieldt

  A wise man once said you are not a real Java programmer until you've dealt with a null pointer exception. The null reference is the source of many problems because it is often used to denote the absence of a value. Java SE 8 introduces a new class called java.util.Optional that can alleviate some of these problems. In the tech article "Tired of Null Pointer Exceptions? Use Java SE 8's Optional!" Java expert Raoul-Gabriel Urma shows you how to make your code more readable and protect it against null pointer exceptions. Urma explains "The purpose of Optional is not to replace every single null reference in your codebase but rather to help design better APIs in which—just by reading the signature of a method—users can tell whether to expect an optional value. In addition, Optional forces you to actively unwrap an Optional to deal with the absence of a value; as a result, you protect your code against unintended null pointer exceptions." Learn how to go from writing painful nested null checks to writing declarative code that is composable, readable, and better protected from null pointer exceptions. Read "Tired of Null Pointer Exceptions? Use Java SE 8's Optional!"

  Read the article

• Proving What You are Worth

  - by Ted Henson

  Here is a challenge for everyone. Just about everyone has been asked to provide or calculate the Return on Investment (ROI), so I will assume everyone has a method they use. The problem with stopping once you have an ROI is that those in the C-Suite probably do not care about the ROI as much as Return on Equity (ROE). Shareholders are mostly concerned with their return on the money the invested. Warren Buffett looks at ROE when deciding whether to make a deal or not. This article will outline how you can add more meaning to your ROI and show how you can potentially enhance the ROE of the company.   First I want to start with a base definition I am using for ROI and ROE. Return on investment (ROI) and return on equity (ROE) are ways to measure management effectiveness, parts of a system of measures that also includes profit margins for profitability, price-to-earnings ratio for valuation, and various debt-to-equity ratios for financial strength. Without a set of evaluation metrics, a company's financial performance cannot be fully examined by investors. ROI and ROE calculate the rate of return on a specific investment and the equity capital respectively, assessing how efficient financial resources have been used. Typically, the best way to improve financial efficiency is to reduce production cost, so that will be the focus. Now that the challenge has been made and items have been defined, let’s go deeper. Most research about implementation stops short at system start-up and seldom addresses post-implementation issues. However, we know implementation is a continuous improvement effort, and continued efforts after system start-up will influence the ultimate success of a system.   Most UPK ROI’s I have seen only include the cost savings in developing the training material. Some will also include savings based on reduced Help Desk calls. Using just those values you get a good ROI. To get an ROE you need to go a little deeper. Typically, the best way to improve financial efficiency is to reduce production cost, which is the purpose of implementing/upgrading an enterprise application. Let’s assume the new system is up and running and all users have been properly trained and are comfortable using the system. You provide senior management with your ROI that justifies the original cost. What you want to do now is develop a good base value to a measure the current efficiency. Using usage tracking you can look for various patterns. For example, you may find that users that are accessing UPK assistance are processing a procedure, such as entering an order, 5 minutes faster than those that don’t.  You do some research and discover each minute saved in processing a claim saves the company one dollar. That translates to the company saving five dollars on every transaction. Assuming 100,000 transactions are performed a year, and all users improve their performance, the company will be saving $500,000 a year. That $500,000 can be re-invested, used to reduce debt or paid to the shareholders.   With continued refinement during the life cycle, you should be able to find ways to reduce cost. These are the type of numbers and productivity gains that senior management and shareholders want to see. Being able to quantify savings and increase productivity may also help when seeking a raise or promotion.

  Read the article

• The Lease Standard Train is Back on Track

  - by Theresa Hickman

  As I was walking to the elevator, I ran into Seamus Moran, our resident accounting expert. Me: “Hi Seamus, where have you been? You don’t write, you don’t call, and you don’t send me flowers. I’ve been hearing more and more about the Lease Accounting topic. It looks like Congress is weighing in on it too and putting heat on FASB. According to a recent article in Reuters  “representatives Brad Sherman, a Democrat, and Republican John Campbell, have written to the U.S. Financial Accounting Standards Board warning of dire economic fallout from a plan to have companies put leases on their balance sheets." Here’s what Seamus had to say: Yes, but there have been some recent developments. The FASB and IASB cleared a logjam, resolved a final “content of the standard” issue, and articulated a way to move forward on Leases last Wednesday.  It looks like the Lease Standard Train is back on track.   We’ve just had a briefing from PwC. The Lease timeline now looks like this: Now to June 2012: The staff will write up the decisions June 2012: Boards will meet on “logistical” issues (glossed over) Oct, Nov, most likely December 2012: A New Lease Exposure Draft will be crafted January – April 2013: Public Comment period begins April to September 2013: Everyone to digest the comments and draft the final standard End of 2013 (Probably more like Early 2014): Publish the new Lease Accounting Standards 2015: Retroactive reporting 2017: New standard is effective It seems that leases under one year will be treated as “rent expense”. If it doesn’t cross two (annual) balance sheets, it doesn’t really matter. This is good news in terms of clarity, resolution, and moving forward on one of the last remaining items to converge the IFRS and U.S. GAAP standards. There are ambiguities, issues, concerns, et cetera, of course, and there are bright lines (“rules”) that bother the “no rules, please” people and ambiguities (“judgments”) that bother the “clarity, please” people, but at least the train isn’t falling off the tracks.  

  Read the article

• Trust

  - by mprove

  I sense traffic of this blog w/o a present reason. Hmm. What about this,  brief musings about trust: Each software, each website, each social platform, each community building effort is a matter of trust building. You make a social promise to continue the effort, and to care for the commitment of the users or community members. It is easy to offer more to your community. On the other hand, it is quite difficult or impossible to take something away, or to close down or end the product or community without disappointing someone. cheers,Matthias

  Read the article

• Multiple Java EE Agents on Single Managed Server

  - by tina.wang

  A default JEE agent is created when you create domain, which is named as OracleDIAgent. 1. In Studio, duplicate the agent, change its name to genAgent, change the web application context to genagent. 2: Go to datasource of genAgent, drop all datasources.3: Generate server template. put the jar file under odi\common\templates\wls 4: Deploy this template by update the existing domain. Bring up the config.cmd, choose update existing domain. 5: Update the domain using the template that just generated. Go through the Configuration wizard. (I did not modify anything or configure anything here). 6: The wizard will give information says the deployment was successful. 7: Bring up the admin server and ODI_server1. 

  Read the article

• NEC Offers Midrange Data Deduplication

  The new HydraStor HS3-210 bring a more affordable, relatively speaking, storage system to the midmarket.

  Read the article

• Questions Anyone?

  - by Kevin Smith

  I've been working with WebCenter Content for almost 9 years now and have a ton of topics rolling around my head that I'm sure would make excellent blog post once I find the time to write them up. Does anyone have any questions they would like answered? Like why does WCC do ...? How does this feature work? I can't seem to get this working? Post your question to the comments and if it is something on my list of topics I had planned on creating a blog post about I will move it to the top of the list.

  Read the article

• Browser Alert -- cannot download links using Internet Explorer

  - by user554629

  Internet Explorer ( ie8, ie9 ) is mangling downloads from this blog. Links to files on this blog ( eg., dirstats ) are typically downloaded using browser:  R-click, SaveAs This works fine on Chrome, Firefox and Safari.  Internet Explorer is not handling the html reference to the file, and adds .html to the filename.   The file will be saved in an incorrect format.   Relatively harmless for a script file that is plain text, but binary files like obiaix.tar.gz , will be corrupted, and there is nothing you can do about it. "Don't get corrupted, get rid of cable  Internet Explorer, use firefox"  ( sorry, US TV advert reference ) The useful part of the compressed tar file is that you don't have to worry about Windows line-end characters corrupting the scripts, and you don't have to change execution permissions to get the scripts to work. dos2unix dirstats   chmod +x dirstats

  Read the article

• New Whitepaper: Sales Cloud Business Object Cheatsheet

  - by Richard Bingham

  Ever tried coding groovy in Application Composer and found it hard to remember the API names for the standard objects and their fields? To help we have created this short set of ERD-like diagrams for the most regularly used Business Objects with along with their key attributes. As a handy PDF we hope this quick-reference guide will make this easier and save you some time. Please let us know in the comments below if this is useful or any enhancements you'd like us to add.

  Read the article

• Welcome to ubiquitous file sharing (December 08, 2009)

  - by user12612012

  The core of any file server is its file system and ZFS provides the foundation on which we have built our ubiquitous file sharing and single access control model.  ZFS has a rich, Windows and NFSv4 compatible, ACL implementation (ZFS only uses ACLs), it understands both UNIX IDs and Windows SIDs and it is integrated with the identity mapping service; it knows when a UNIX/NIS user and a Windows user are equivalent, and similarly for groups.  We have a single access control architecture, regardless of whether you are accessing the system via NFS or SMB/CIFS.The NFS and SMB protocol services are also integrated with the identity mapping service and shares are not restricted to UNIX permissions or Windows permissions.  All access control is performed by ZFS, the system can always share file systems simultaneously over both protocols and our model is native access to any share from either protocol.Modal architectures have unnecessary restrictions, confusing rules, administrative overhead and weird deployments to try to make them work; they exist as a compromise not because they offer a benefit.  Having some shares that only support UNIX permissions, others that only support ACLs and some that support both in a quirky way really doesn't seem like the sort of thing you'd want in a multi-protocol file server.  Perhaps because the server has been built on a file system that was designed for UNIX permissions, possibly with ACL support bolted on as an add-on afterthought, or because the protocol services are not truly integrated with the operating system, it may not be capable of supporting a single integrated model.With a single, integrated sharing and access control model: If you connect from Windows or another SMB/CIFS client: The system creates a credential containing both your Windows identity and your UNIX/NIS identity.  The credential includes UNIX/NIS IDs and SIDs, and UNIX/NIS groups and Windows groups. If your Windows identity is mapped to an ephemeral ID, files created by you will be owned by your Windows identity (ZFS understands both UNIX IDs and Windows SIDs). If your Windows identity is mapped to a real UNIX/NIS UID, files created by you will be owned by your UNIX/NIS identity. If you access a file that you previously created from UNIX, the system will map your UNIX identity to your Windows identity and recognize that you are the owner.  Identity mapping also supports access checking if you are being assessed for access via the ACL. If you connect via NFS (typically from a UNIX client): The system creates a credential containing your UNIX/NIS identity (including groups). Files you create will be owned by your UNIX/NIS identity. If you access a file that you previously created from Windows and the file is owned by your UID, no mapping is required. Otherwise the system will map your Windows identity to your UNIX/NIS identity and recognize that you are the owner.  Again, mapping is fully supported during ACL processing. The NFS, SMB/CIFS and ZFS services all work cooperatively to ensure that your UNIX identity and your Windows identity are equivalent when you access the system.  This, along with the single ACL-based access control implementation, results in a system that provides that elusive ubiquitous file sharing experience.

  Read the article

• Hack Fest at Devoxx

  - by Yolande Poirier

  On November 11th and 12th, Devoxx attendees will get the chance to build a Java embedded application onsite. During the Raspberry Pi & Leap Motion hands-on labs on Monday and Tuesday mornings, you will learn about Raspberry Pi development with Java embedded using Leap Motion and other sensors. The afternoons are hacking time on a project of your choice. You can get your inspiration from existing projects. You can also use their project source code and improve on already developed applications.  The goal is for you to create something fun and innovative in only a couple of days, no matter your experience in embedded systems.  We provide you with equipment like the Raspberry Pi, sensors, and Leap Motion. Thanks to Stephan Janssen for lending us 10 Leap Motions for the Hack Fest. Raspberry Pi and sensors are pre-configured. You will access the sensors via a web address. You can build a project alone if you want. We also give the opportunity to brainstorm ideas with other attendees and maybe build something more complex. You will get one-on-one help from top-notch coaches. Vinicius Senger has tons of experience with Java and the Raspberry. He runs Java embedded challenges and give training year round. Geert Bevin contributed to many open source projects and his latest venture is with the Leap Motion. Bruno Borges's expertise is in connecting backend logic with great interfaces. Yara Senger is a Java Champion and a great Java embedded mentor.    Don't miss this opportunity! This is your chance to transform your idea into a Raspberry Pi or a Leap Motion application.

  Read the article

• Aberdeen 10/25 Webcast: Service Excellence and the Path to Business Transformation

  - by Charles Knapp

  The uncertain economy has had a sustained impact on service organizations and processes. The impact has contributed to new complexities - new customer engagement channels, enhanced user and customer expectations, rapidly evolving technologies, increased competition, and increased compliance and regulatory mandates. Yet many organizations have embraced these challenges by investing in and transforming customer service to evolve, differentiate, and thrive under current constraints. What is their secret? Transforming Support Centers into Profit Centers According to the recent Aberdeen research report, “Service Excellence and the Path to Business Transformation”, service is now viewed as a strategic profit center at nearly 70% of organizations. As customers demand improved service, in terms of speed, efficiency and reliability, an organization's success has become increasingly dependent on optimizing the customer ownership experience. Those service organizations focused on providing easy, consistent, and relevant interactions across the customer lifecycle, including service and support delivery, are experiencing higher levels of customer acquisition and retention and are achieving better revenue and margin growth rates.  Don't miss this opportunity to learn how to transform to provide the next generation of service offerings. Click here to register now for the webcast and download a complimentary copy of this informative new research paper.

  Read the article

• Most efficient Implementation a Tree in C++

  - by Topo

  I need to write a tree where each element may have any number of child elements, and because of this each branch of the tree may have any length. The tree is only going to receive elements at first and then it is going to use exclusively for iterating though it's branches in no specific order. The tree will have several million elements and must be fast but also memory efficient. My plan makes a node class to store the elements and the pointers to its children. When the tree is fully constructed, it would be transformed it to an array or something faster and if possible, loaded to the processor's cache. Construction and the search on the tree are two different problems. Can I focus on how to solve each problem on the best way individually? The construction of has to be as fast as possible but it can use memory as it pleases. Then the transformation into a format that give us speed when iterating the tree's branches. This should preferably be an array to avoid going back and forth from RAM to cache in each element of the tree. So the real question is which is the structure to implement a tree to maximize insert speed, how can I transform it to a structure that gives me the best speed and memory?

  Read the article

• Best Party of 2011: Introducing Java 7

  - by Tori Wieldt

  As a member of the Java community, you played a critical role in building Java 7. You contributed great ideas for new features and new ways of working and collaborating to take the next step in development. And now, it’s time to celebrate with a global gathering of the Java community—online and live. See your ideas at work. Hear about everything Java 7 can do for you and how we’re moving Java forward together. Join us for celebrations in Redwood Shores, São Paulo, or London—as we unveil the latest innovations in Java 7. The three events will be joined with each other by satellite, and will be available as a webcast if you can't attend the live events. Learn from fellow developers around the globe who are getting the most out of the new features. Get overviews from the Java experts on Project Coin, the Fork/Join framework, the new file system API, improvements to the VM, and a panel discussion with Q & A. Thursday, July 07, 2011 Redwood Shores, United States: 9:00 a.m. PT - 1:30pm PT São Paulo, Brazil: 1:00 p.m BRT London, England: 5:00 p.m. BST Live Webcast: 9:00 a.m. PT - 1:30pm PT  Get more information about the July 7 events. You need to register for the live events or webcast. There will also be other celebrations at Java User Group (JUG) meetings for the next few months.Find your local JUG. Follow the conversation on Twitter: follow @Java and use #java7 Java is moving forward, let's party!

  Read the article

• Is it Considered Good SQL practice to use GUID to link multiple tables to same Id field?

  - by Mallow

  I want to link several tables to a many-to-many(m2m) table. One table would be called location and this table would always be on one side of the m2m table. But I will have a list of several tables for example: Cards Photographs Illustrations Vectors Would using GUID's between these tables to link it to a single column in another table be considered 'Good Practice'? Will Mysql let me to have it automatically cascade updates and delete? If so, would multiple cascades lead to an issues? UPDATE I've read that GUID (a hex number) Generally takes up more space in a database and slows queries down. However I could still generate 'unique' ids by just having the table initial's as part of the id so that the table card's id would be c0001, and then Illustrations be I001. Regardless of this change, the questions still stands.

  Read the article

< Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >