Search Results

Search found 19586 results on 784 pages for 'machine instruction'.

Page 446/784 | < Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >

• Why are my 2 new windows 7 (64 bit) workstations taking over 10 minutes to log on to the SBS 2008 do

  - by Howie Hughes

  Hi, we have a SBS 2008 domain. On this we have windows XP clients. However, we are testing the windows 7 (64 bit) machines on the network. It takes between 10 & 15 minutes to log on - every time! I have checked the event logs on the client machine, and the only error I can see is; Event ID: 6005 The winlogon notification subscriber is took 615 seconds to handle the notification event (CreateSession). I have no warnings in the server event log, everything pings ok by name, so am guessing DNS is fine. Can someone please lend a hand with this, as we really want to go with windows 7. Lastly, both the server, and the windows 7 machines are fully patched and updated. Thank you.

  Read the article

• Windows Boot Manager, linking a 'device' to boot linux

  - by TheCompander

  I'm attempting to boot linux on a UEFI-GPT machine with a Windows Boot Manager (WBM). So far I have installed Archlinux (Arch) with Grub. The grubx64.efi is successfully on my windows boot partition and I can see the option to use it in UEFI-BIOS, selecting this loads grub and I'm able to get into Arch fine. I have noticed that in the Windows Boot Manager, selecting from the splash screen, 'Change defaults or choose other options' 'Choose other options' 'Use a device', shows the boot options as in UEFI-BIOS, in my case grub shows as 'Linux'. Selecting 'Linux' reboots the computer and loads grub then Arch. Is there anyway to use this entry for the device 'Linux' to show directly on the WBM splash screen under the entry for Windows 8.1? Ideally i'd like the 'Arch Linux' to link to the 'Linux' device. Guidance with bcdedit appreciated, thanks in advance.

  Read the article

• User Profile cannot be loaded - Windows 7

  - by Ryan

  After uninstalling an HP Vector Mouse driver, then rebooting, when Windows tries to auto log me in, i get an error message saying tyhe following: The User Profile Service failed the Login. User Profile cannot be loaded. Due to the fact that it is the only account on this PC, I cannot even go into another account. I rebooted the machine several times, before going into Safe Mode with Networking. For some reason, I cannot create a new account whilst in safe mode (I think it is to do with UAC, nothing with UAC is clickable). Thus, I am stuck. I cannot get into my account, nor can I create a new one to copy files over to. Any ideas? Thanks in advance! Ryan EDIT: System Restore was, for some reason turned off. Thus, I cannot restore to a working point.

  Read the article

• Find the source of malware?

  - by Jud Stephenson

  I have a server that was running an older version of lighttpd (1.4.19 on a freebsd 6.2-RELEASE (yea, old) machine) and google alerted me that it had found malware embedded on one of my server's pages. It just so happened to be our index page. I promptly removed the malware and started looking at server logs for how it got there. With no trace in any of the logs of the files being edited, I noticed that the index page's owner had been changed to www, which is the lighttpd user. I then concluded that some sort of veunerability must have existed for that software version and promptly upgraded to 1.4.26. Now the malware is back. I have started some pretty verbose server logging with ftp, lighttpd, and all login attempts to try and see how this script is getting in. Are their any suggestions as to other approaches to take?

  Read the article

• Is there a way to make Apple Mail work well with Exchange server calendar?

  - by Joshua Frank

  My office uses Macs, but most of our clients use Windows and Outlook. Whenever people send invitations from Apple Mail to a Windows/Outlook machine, the invitations are garbled and look nothing like the nicely formatted invitations that Outlook people are used to. We also have no tools to view shared calendars, so we can choose mutually open time slots, and other useful calendar features that Outlook has and Apple Mail seems not to. So is there a plugin or third party program that will give Apple Mail the nice calendar features of Outlook? (By the way, I've looked into actually buying Outlook for Mac, and the pricing is kind of prohibitive, because you MUST buy the whole Office Suite, which we already have, there's no upgrade path, and there's no volume discounting.)

  Read the article

• Since updating to today's version of Skype on Win8, Skype won't even log in

  - by Warren P

  I am using the desktop (win32 not appstore) Skype on Windows 8. I accepted an auto-update today which now will not let me log into skype at all. I wiped out the AppData\Roaming\Skype folder because that's how you get Skype back in the past when it has gone stupid, but that didn't help either. I do not get any error message, just the circular progress indicator that lasts forever. (Okay, so far it's been 30 minutes. It may eventually time out yet.) Other ideas please? I tried the Windows 8 App Store Skype app (WinRT), which I hate, I guess I'll go back and install that for now. Update Skype 6.0.126 seems to be completely broken on my Win8 machine.

  Read the article

• Windows server 2008 issue

  - by Matt Fitz

  We have 2 domains “pdc1” and “devkc” both are windows 2000 Active Directory domains with a 2-way trust relationship in place., has been this way for years. All of our developer machines are joined to the “devkc” domain but the users log into there accounts on the “pdc1” domain. This all works fine with Windows XP, 2000 and 2003 server. However with Windows Server 2008 the users can only log into the “devkc” domain that the machine is joined to, they can not log into the “pdc1” domain. The following error results: "The security database on this server does not have a computer account for this workstation trust relationship” Any ideas would be greatly appreaciated Thanks Matt Fitz

  Read the article

• Wordpress: Problem installing on dedicated windows server 2008/IIS7

  - by Niels Bosma

  I'm having trouble with installing Wordpress on a dedicated Microsoft Windows Web Server 2008 R2. I've installed Wordpress Version 2.9.2 from Web platform installer 3.0. After installation when I try to access wordpress, either from ~/index.php or ~/wp-admin/install.php I get the error: HTTP Error 500.0 - Internal Server Error File monitoring is enabled for a file which could not be found Modul: FastCgiModule Notification: ExecuteRequestHandler Handler: PHP52_via_FastCGI Error Code: 0x80070003 I have both .Net 2.0 and .Net 4.0 installed. Adding a "phpinfo.php" gives me the same error. The application pool in IIS7 that's used for the website is: "No Managed Code" and set to "Integrated" in "Managed Pipeline Mode". I've tried to reboot the machine. What's more can I try?

  Read the article

• I'm trying to install VMWare tools on Ubuntu 12.04.2 LTS and I seem to have a problem with Kernel headers

  - by Pedro Irusta

  I have Ubuntu 12.04.2 LTS installed on a VMware machine on Windows 7 host. I seem to have a problem with Kernel headers when trying to install them I did: sudo apt-get install gcc make build-essential linux-headers-$(uname -r) Reading package lists... Done Building dependency tree Reading state information... Done gcc is already the newest version. build-essential is already the newest version. linux-headers-3.5.0-28-generic is already the newest version. make is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 100 not upgraded. However, when installing VMware tools I get the following error: make[1]: Entering directory `/usr/src/linux-headers-3.5.0-28-generic' CC [M] /tmp/vmware-root/modules/vmhgfs-only/backdoor.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/backdoorGcc32.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/bdhandler.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpName.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpNameLinux.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpNameLite.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/dentry.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/dir.o CC [M] /tmp/vmware-root/modules/vmhgfs-only/file.o /tmp/vmware-root/modules/vmhgfs-only/file.c:122:4: warning: initialization from incompatible pointer type [enabled by default] /tmp/vmware-root/modules/vmhgfs-only/file.c:122:4: warning: (near initialization for ‘HgfsFileFileOperations.fsync’) [enabled by default] CC [M] /tmp/vmware-root/modules/vmhgfs-only/filesystem.o /tmp/vmware-root/modules/vmhgfs-only/filesystem.c:48:28: fatal error: linux/smp_lock.h: No such file or directory compilation terminated. make[2]: *** [/tmp/vmware-root/modules/vmhgfs-only/filesystem.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmhgfs-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.5.0-28-generic' make: *** [vmhgfs.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only' Any help appreciated!

  Read the article

• Setting a custom timeout to nmblookup

  - by C2H5OH

  As part of a batch script, I have the following command: hostname=$(nmblookup -A $ip_address | awk '$2 == "<20>" {print $1}') Which works fine from a functinality perspective, even for unresolved hosts. The problem is that when the IP address is not reachable or the remote machine does not respond to the SMB request, the command takes about ten seconds to complete. Therefore, the question is simple: is there a way to lower the elapsed time in such cases? Or, in other words, is there a way to set a custom timeout for the nmblookup command? NOTE: I'm interested in solutions that do not make use of SIGALRM or similar mechanisms; if they exist. The nmblookup version is 3.6.3 from Ubuntu 12.04 LTS.

  Read the article

• Kickstart installation: Unable to read package metadata

  - by yacov

  I'm trying to install a CentOS OS with kickstart using HTTP as the installation source. The kickstart server and the installed server are both running on VMs on the same machine. after the anaconda system installer starts it fails with the following message: I tried installing two different versions of Centos(5.5 and 5.2), and they both pass a CDROM media test the manual installation provides. The only errors on the kickstart server side are some errors in the httpd log I consider irrelevant: [Sat Mar 12 23:25:19 2011] [error] [client 192.168.1.112] File does not exist: /tftpboot/linux-install/platforms/CentOS5.5/images/product.img [Sat Mar 12 23:25:19 2011] [error] [client 192.168.1.112] File does not exist: /tftpboot/linux-install/platforms/CentOS5.5/disc1 I tried searching the internet for days and haven't found any solution... Does anyone have any idea?

  Read the article

• Is it reasonable to have multiple SSH keys?

  - by Leonid Shevtsov

  So far I've created a separate SSH key for each server I need to login to (for each purpose, to be more accurate). I did it out of a sense of security, just like different passwords to different sites. Does having multiple SSH keys actually improve security? All of them are used from the same machine, are located in the same ~/.ssh, most even have the same passphrase. So... should I give up the whole system and just use one SSH key for everything?

  Read the article

• Cyrus IMAP: Unable to connect to remote host: Connection refused

  - by Nick

  I'm working on setting up a Cyrus 2.2 IMAP server on Ubuntu Server 9.04. If I telnet from the server itself: # telnet localhost imap I get: * OK IMAP Cyrus IMAP4 v2.2.13-Debian-2.2.13-14ubuntu3 server ready Which is what I should be seeing. If I try from another machine on the network: telnet 192.168.5.122 imap I get: telnet: Unable to connect to remote host: Connection refused UPDATE: From /etc/cyrus.conf # add or remove based on preferences imap cmd="imapd -U 30" listen="imap" prefork=0 maxchild=100 imaps cmd="imapd -s -U 30" listen="imaps" prefork=0 maxchild=100 #pop3 cmd="pop3d -U 30" listen="pop3" prefork=0 maxchild=50 #pop3s cmd="pop3d -s -U 30" listen="pop3s" prefork=0 maxchild=50 #nntp cmd="nntpd -U 30" listen="nntp" prefork=0 maxchild=100 #nntps cmd="nntpd -s -U 30" listen="nntps" prefork=0 maxchild=100 To the best of my knowledge, there is no firewall running on the box. I've tried restarting the saslauthd and cyrus2.2 daemons, with no effect. What else can I try?

  Read the article

• Can you use a USB hard drive in ESXI?

  - by semi

  I know that you can install ESXi 4.0 on a thumbdrive, but I was wondering if you could plug in an external harddrive to give extra storage to one of your VMs? We run a fileserver inside of ESXi that needs a space upgrade, but we're thinking of migrating to a different fileserver solution and would rather stick to external media to ease the later transition. edit: Ideally I'd like the drive to show up to the VM directly and not have ESXi control it, so that I could move it to a different machine and still have all of the data appear the same.

  Read the article

• Hyper-V server 2012 nic teaming setup and virtual switch configuration

  - by Calvin

  I have a server with 2 nics. I installed Hyper-v 2012 server (not windows server 2012, no gui) I am trying to set up load balancing. I have both nics in the same switch currently in trunk mode and no native vlan. I use the new-netlbfoteam command to create a team with both nics, I can then "set-netlbfoteamnic "Nic Team" -vlanid 4" so that its available to me with a DHCP or static address but as soon as I try to create a virtual switch it becomes unresponsive. My guess is that is due to it removing the vlan tagging I setup. if I add-netlbfoteamnic and set it for vlan 4, then set the IP I can ping it from my management computer but I just get an error "an error occurred while attempting to connect to server "xxxxxx" Check that the Virtual Machine Management service is running and that you are authorized to connect to the server."

  Read the article

• Writing an SVN hook that updates copy of committed code

  - by Jordan Reiter

  I have a SVN repository with a lot of sub-projects stored in it. Right now in my post-commit I just loop through all possible folders on the machine and run svn update on each: REPOS="$1" REV="$2" DIRS=("/path/to/local/copy/firstproject" "/path/to/local/copy/anotherproject" ... "/path/to/local/copy/spam") LOGNAME=`/usr/bin/whoami` for DIR in ${DIRS[@]} do cd $DIR sudo /usr/bin/svn update --accept=postpone 2>&1 | logger logger "$LOGNAME Updated $DIR to revision $REV (from $REPOS) " done The problem is that this is slow and redundant when I'm just committing the subfolder of one of the projects. I'm wondering if there's a better way of identifying which of the DIRS I should use and only update that one. Is there some way to do this? As far as I can tell there's no way to determine which part of a repo was committed and thus which directory needs to be updated. Is the only alternative to create a separate repository for each project? (Probably should have done that from the start, if so...)

  Read the article

• Wifi ap finder/selector for windows 7

  - by wag2639

  Is there wifi finder program for windows 7 that can let me choose specific access points to connect to? In my school, the wifi network uses the same SSID for numerous access points and usually the default wifi finder in Windows 7 connects to the first one. Even if it connects to the closest one with the best signal, there are times when a specific access point will not work. Machine: Lenovo IdeaPad S10-2 running Windows 7 (32bit) Note: On my ThinkPad, I've got access connection that does the job but that didn't seem to work on the IdeaPad the last time I tried.

  Read the article

• Permanently change IP address on SuSE 10

  - by Long Ngo

  I am trying to change IP address of a SuSE 10 machine that is running Tomcat. I need to create a shell script to do this so could not use YaST. As some sites suggested on my Google search, I edited the files in /etc/sysconfig/network/ifcfg-eth-* to change the IP address. After that, I restarted the network service by calling /etc/init.d/network restart. The network card restarting just fine. I, then, restarted tomcat web service. However, when I browsed the new IP address using browser, I got an "Request denied" message. Can anyone please tell me how I could do this? Thanks

  Read the article

• Mercurial SSH process blocks when run from Local System

  - by Liedman

  We are using Mercurial over SSH for our development. We use Hudson for continous integration, and have deployed it on Tomcat, running on a Windows 2003 Server using the Local System account. Mercurial is configured to use Putty's plink.exe as its ssh command in Mercurial.ini, together with a private key for SSH authentication. When Hudson attempts any Mercurial command over SSH, the operation just blocks. I can see the three processes being started: hg.exe, cmd.exe and plink.exe. On the remote machine, I can also see the SSH session being opened and the authentication key being accepted. After that, nothing appears to happen, and everything just blocks, seemingly forever. (As a side note, subversion/SVN over SSH works from Hudson to the same server, using the same user and authentication key). A solution would of course be the best, but at least a hint for how I should debug it to get further would be nice, since I'm stuck and haven't even got an error message right now.

  Read the article

• windows 2003 remote desktop fail connect after windows update

  - by bookstorecowboy

  I have a number of windows servers, both win2003, win2003r2 and win2003r2 64 bit. After installing windows updates on the machines and rebooting terminal services give me an immediate "not connect" message. The servers are running fine and you can connect via the physical machine. Once you reboot the box (with remote restart in some cases when it's not accessible) terminal services behaves itself and allows a connection. Whilst it's not a show stopper it is rather annoying when you can't see your box. Anyone know why this is or what the cause is?

  Read the article

• Ping, firewall or DNS problem on Win Server 2008 R2

  - by Fred Kaiser

  Hi there, I've installed windows server 2008 as a VM for the developers here to work on. Installed SQL Server 2008 as well as IIS7. I am not quite sure why, I can remote into that machine using the name I gave to it (winserverdev) but the guys that are supposed to use the bloody thing can't. One very interesting thing is that I can connect but I can't ping... not the name nor the IP address. Is there anything that I should be looking in order to make it work? Any ideas are welcome. Thanks heaps in advance, I really appreciate it. Cheers, Fred Kaiser

  Read the article

• ArchBeat Link-o-Rama for November 28, 2012

  - by Bob Rhubart

  Oracle BPM and Oracle Application Development Framework (ADF) | Dan Atwood Oracle ACE Dan Atwood shares an excerpt from "Oracle BPM and ADF (Part 1)," part of Avio Consulting's new self-paced online Oracle BPM Developer Workshop training. BPEL and Fire-and-Forget Web Services | Lonneke Dikmans Oracle ACE Director Lonneke Dikmans shares two use cases to illustrate the use of fire-and-forget web services. Backup and Recovery of an Exalogic vServer via rsync | Donald "On Exalogic a vServer will consist of a number of resources from the underlying machine," says the man known only as Donald. "These resources include compute power, networking and storage. In order to recover a vServer from a failure in the underlying rack all of these components have to be thoughts about. This article only discusses the backup and recovery strategies that apply to the storage system of a vServer." Making Architecture Matter | Harald Wesenberg and Einar Landre "As Architects, we want our architecture to matter. We want projects to implement our grand designs, one little step at a time, with each piece fitting perfectly into the big puzzle that is software architecture," say authors Harald Wesenberg and Einar Landre. "But reality is a bit trickier." Thought for the Day "A distributed system is one in which the failure of a computer you didn't even know existed can render your own computer unusable." — Leslie Lamport Source: SoftwareQuotes.com

  Read the article

• Using dnsmasq dns server on a laptop for a locally hosted tld

  - by kimausloos

  Hi, I'm running a working apache install with mod vhost_alias on a laptop. Everything works, but I have to manually add hosts in my /etc/hosts file. I'd like to install dnsmasq to point a tld to my local machine (this is not the problem, I know how to add a wildcard tld to dnsmasq), but how do I make it so that it will go look for other dns servers upstream? Remember I'm talking about a laptop, so I will be working on various wifi hotspots, with different default gateways, dns servers, etc. I've searched for quite some time but the only things I find are guides that require you to hardcode the upstream servers wich is a no-go for me. Any help is appreciated!

  Read the article

• Java Spotlight Episode 86: Tony Printezis on Garbage Collection First

  - by Roger Brinkley

  Interview with Tony Printezis on Garbage Collection First (GC1). Joining us this week on the Java All Star Developer Panel is Arun Gupta, Java EE Guy. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes News JSR 358: A major revison of the Java Community Process - JCP 3.Next JAX-RS 2.0 Early Draft- Third Edition Events June 11-14, Cloud Computing Expo, New York City June 12, Boulder JUG June 13, Denver JUG June 13, Eclipse Juno DemoCamp, Redwoood Shore June 13, JUG Münster June 14, Java Klassentreffen, Vienna, Austria June 18-20, QCon, New York City June 19, CJUG, Chicago June 20, 1871, Chicago June 26-28, Jazoon, Zurich, Switzerland Jun 27, Houston JUG ?? July 5, Java Forum, Stuttgart, Germany Jul 13-14, IndicThreads, Delhi July 30-August 1, JVM Language Summit, Santa Clara Feature InterviewTony Printezis is a Principal Member of Technical Staff at Oracle, based in Burlington, MA. He has been contributing to the Java HotSpot Virtual Machine since 2006. He spends most of his time working on dynamic memory management for the Java platform, concentrating on performance, scalability, responsiveness, parallelism, and visualization of garbage collectors. He obtained a Ph.D. in 2000 and a BSc (Hons) in 1995, both from the University of Glasgow in Scotland. In addition, he is a JavaOne Rock Star, a title awarded for his highly rated JavaOne session on GC. Mail Bag What’s Cool JavaOne content selection is complete. Notifications done.

  Read the article

• Avoid Memory Leaks in SharePoint2010 Development

  - by ybbest

  When you develop SharePoint solution using code, you need to Dispose SPWeb appropriately to avoid memory Leaks. The general guideline for this are: Dispose Not to dispose OpenWebEnumerating Webs or AllWebs ParentWebRootWeb SPWeb from SPContext There are more rules than the one list above and as a smart SharePoint developer, you do not have to memories all the rules .There is a tool called SharePoint Dispose Checker which can help you to find potential memory leak. To use SPDisposeChecker in you solution, you need to download the tool from MSDN Code Gallery and install it in your development machine as follow. 1. Run the installer with elevated privilege. 2. Accept the agreement and click next. 3. Select those two options and click next. 4. Select Everyone and click Next. 5. Go to Toolsà SharePoint Dispose Check to Configure the SPDisposeCheck. 6. You can change the Treat problems as Errors to Warnings. 7. after clicking Save, you are all set to use the tool.Recompile my project , I can get the result below. References: SharePoint 2007/2010 “Do Not Dispose Guidance” + SPDisposeCheck

  Read the article

< Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >