Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 447/1359 | < Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454  | Next Page >

• dnsmasq not running

  - by Yevgeniy M.

  i installed ubuntu 12.04 on a netbook with 16GB SSD. To keep the installation small i used the mini.iso i got from here. Everything worked fine, but i noticed that dnsmasq does not get started by NetworkManager. On a different machine i installed 12.04 from a regular iso and netstat shows dnsmasq running and listening on port 53. NetworkManager.conf look identically on both systems. The line dns=dnsmasq is present. Although i do not really need dnsmasq - name resolution works fine without - i would like to know the reason why dnsmasq is running on one system, but does not run on the other and how i could adjust this behavior. Thx in advance!

  Read the article

• How to restart colord

  - by Blair Zajac

  A tiff security update came out today for 12.04 and colord is still running with the older shared library # lsof -n | grep DEL | grep /lib colord 3454 colord DEL REG 252,1 3673529 /usr/lib/x86_64-linux-gnu/libtiff.so.4.3.4 Besides restarting the whole system, given there's no /etc/init.d/colord, how do I restart it so it picks up the new libtiff.so.

  Read the article

• Dual monitor setup with Intel graphics and Nvidia Geforce GT 425M on 12.04

  - by fo_x86

  I have a Dell XPS L401x and just installed 12.04. I have a mini-display and an HDMI output, and I could hook up two Dell UltraSharp monitors to each port on Windows 7, and get a triple monitor setup. Doing a bit of research, it seems like the mini-display is wired to the integrated graphics card whereas HDMI is hooked up to Nvidia graphics card. I've also installed Bumblebee as it seemed like that was the proper way of installing Nvidia drivers on Ubuntu. At the moment none of my monitors is being recognized by Ubuntu. Is it even possible to have a triple monitor (laptop display + 2 external) setup? Has anyone successfully done this?

  Read the article

• Change screen resolution from terminal

  - by Keith

  When I enabled my Nvidia graphics card, it changed the resolution of my screen to larger than my screen. As the result I cannot access any functions that were previously on the right side of my screen. How do I undo this? I originally had 8.04 and was able to change the resolution to whatever I wanted. I'm a new user and can copy and paste commands from a post to terminal mode but that's about it. I have no idea what they are or what they mean.

  Read the article

• To same computer Remote desktop thrue WRT54G router

  - by Kangarooo

  Cant access from my Same comp same comp to test if all is ok. Tryd all mentioned posibilities. Tryd my ip xxx.xxx.xxx.xxx / localhost with / without :5900 added with / without in "Remote desktop" checked "Configure network automatically to accept connection" with / without in router WRT54G enabled port 5900 forwardet to my comp 192.168.1.3 UPNP is enabled. I can connect to one other comp witch isnt using router and checked "Configure network automatically to accept connection" and to one thrue TENDA W311R+ router where ive put port forwarding to 5900 and there works xxx.xxx.xxx.xxx:5900 Whats wrong? What ive missed?

  Read the article

• How to make Bluetooth headset appear as a sound device?

  - by torbengb

  I have an onboard VIA sound card but no speakers attached. Instead, I want to use my bluetooth headset as my only sound device, both input and output (mono). I plugged in the bt dongle and was impressed that it was ready to use within seconds. I then paired it to my Jabra BT500 headset. No problems so far. I then went to Sound Preferences but no bluetooth is listed, only the onboard VIA sound card. Question: How can I enable my headset, and make it the default all the time?

  Read the article

• Why are some bugs I'm affected by and subscribed to missing in my launchpad bug list?

  - by joschi

  I have a long list of bugs in my launchpad account but some bugs I set to being affected by and being subscribed to are not showing up in that list. Even when I change the options of bugs to show I don't get these bugs.First I thought these were bugs being set to 'wishlist' but some of them are showing up in the list. Does anyone else know that he/she is subscribed to a bug he/she doesn't find in his bug list? And maybe there's also someone who knows how to fix this.

  Read the article

• Cannot Boot Win XP or Ubuntu from hard drive - get Input Not Supported

  - by Jim Hudspeth

  1) Downloaded 11.10 ISO file to Dell XP Workstation 2) Made bootable USB using Pendrivelinux 3) Installed to harddrive using option 1 (Install along side Windows) 4) Rebooted when instructed 5) Booted into Ubuntu just fine (first time) 6) Attempted restart - got first splash screen followed by "input not supported" - tapped ESC and eventually got into Ubuntu 7) Later attempts failed - got "input not supported"; no eventual boot 8) Many retries holding / tapping various keys - same result 9) Booted from USB - all files appear to be in place - can access GRUB on harddrive Suggestions appreciated - must to be able to boot XP. Thanks in advance

  Read the article

• how to get rid of light desktop manager entry in ubuntu greeter

  - by user205162

  Got "light desktop manager" entry in ubuntu greeter for some strange reason and can't get rid of it. As the current OS is Ubunu 13.10 the way to configure the lightdm greeter is rather strange, can't find any solution in greeter configs. More annoying thing is that Mr.LDM seems to have password very hard to guess so I can't login to this "account". Can you help me to find source of this problem and find the solution?

  Read the article

• Seeking for a better solution to restrict access in GRUB2 menu

  - by LiveWireBT

  I just read that in certain situations you should also protect access to your GRUB2 menu by setting a password and may be refining acces by adding --unrestricted or --users as arguments to menuentries und submenus. I read the corresponding pages in the Ubuntu Community Documentation and the Arch Wiki. So, I created /etc/grub.d/01_security, stored usernames and passwords in there, made the file executable and ran update-grub. This is working as intended, every action in the menu prompts for username and password, but I also want to modify the automatically generated entries to either restrict them to certain users (via --users) or make them available for everyone, but not editable by everyone (via --unrestricted). I was able to find the proper lines in 10_linux and edit them accordingly, however I'd love to see an easier solution. Perhaps an option like GRUB_DISABLE_RECOVERY="true" or GRUB_DISABLE_OS_PROBER=true in /etc/default/grub for easy (re)configuration (for linux and os-prober generated entries). Here's a diff from my 13.10 installation: $ diff /etc/grub.d/10_linux /etc/grub.d/10_linux_bak 123c123 < echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} --unrestriced \$menuentry_id_option 'gnulinux-$version-$type-$boot_device_id' {" | sed "s/^$ --- > echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-$version-$type-$boot_device_id' {" | sed "s/^/$submenu_inde$ 125c125 < echo "menuentry '$(echo "$os" | grub_quote)' ${CLASS} --unrestricted \$menuentry_id_option 'gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_$ --- > echo "menuentry '$(echo "$os" | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_indentation/" 323c323 < echo "submenu --unrestricted '$(gettext_printf "Advanced options for %s" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_$ --- > echo "submenu '$(gettext_printf "Advanced options for %s" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {" tl;dr: I'd love the see a simple solution for GRUB2 entries that cannot be modified without a password or are limited to certain users. (Yes, GRUB_DISABLE_RECOVERY="true" is active.)

  Read the article

• How do i stop or turn off the x-server?

  - by Alex

  im trying to do this tutorial: http://wiki.accelereyes.com/wiki/index.php/Installing_CUDA_Under_Ubuntu_10.04 I need the command that would completely stop/turn off the x-server. when i try to install the nvidia developer driver, i get a blue screen telling my Error:cant install with x-server running, please turn it off (something like that). "sudo service gdm stop" worked at the time i guess, (didnt give any errors) but the x-server is still running. is this the command i should be using? thanks for anyhelp!

  Read the article

• Will grub overwrite EasyBCD entry if I already have Windows 7 and Windows XP installed?

  - by Sachin

  Installing Ubuntu on EEE PC which already has Windows 7 and Windows XP in dual boot using Easy BCD I have an ASUS EEE PC 1015PEM with Windows 7 starter and Windows XP in dual boot configuration on separate partitions. Now I want to replace my Windows XP with Ubuntu 11. Earlier after installing XP on my system it failed to boot in Windows 7, which I restored easily using EasyBCD. If I install Ubuntu 11 will I be able to boot my Windows 7 also? Will grub overwrite the EasyBCD entry for XP?

  Read the article

• How to layout application icons in the panel?

  - by Vincenzo

  Hello everybody, Application and applets icons are changing their position or even disappears from the gnome-panel (see an example). It often happens after connecting to external monitor with different resolution setting, or sometimes happens by chance (I don't know what is the reason of such behaviour). Some icons I can move, others I can't. I don't know if they're locked or not. My question is: Is there any settings/software for icon's position control in the panel? I noticed that locking does not resolve this issue. Thank you for support.

  Read the article

• Throttle and overheating on Dell XPS Studio 1645

  - by Ross

  I realise there is an older thread on the very subject but that seems to be pretty dead. I just got a Dell Studio XPS 1645 laptop and the fan noise and overheating is pretty ridiculous. This is actually a well known problem with the laptop that is apparently solved with the combination of a BIOS update and the purchase of their 130w charger. I plan on buying this charger as soon as possible, however I've noticed that since installing Ubuntu the fan noise has became more permanent and the overheating is quite a bit worse too. I've had to turn it off twice to let it cool down for an hour or so because it starts seriously affecting the performance. It makes watching things, listening to music or leaving the laptop on while I sleep a real pain. If anyone has some new information on this issue or could help out in anyway at all I'd be very grateful. Thanks.

  Read the article

• Still can't mount windows 8 drive after restart

  - by Ishai Bloch

  After following the instructions in other posts, I am still getting the same error when I try to mount my Windows 8 drive in Ubuntu 14.04 on a dual boot system. I have disabled fast start after shutdown, hybrid hibernation, and the preinstalled Asus Instant On service. I have tried restarting Windows rather than shutting down. In all cases I get the same error message, namely: Error mounting /dev/sda4 at /media/jesse/OS: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sda4" "/media/jesse/OS"' exited with non-zero exit status 14: Windows is hibernated, refused to mount. Failed to mount '/dev/sda4': Operation not permitted The NTFS partition is in an unsafe state. Please resume and shutdown Windows fully (no hibernation or fast restarting), or mount the volume read-only with the 'ro' mount option. I did not have the same issue before upgrading from Ubuntu 12 to 14. For what it's worth my computer is supposedly a "hybrid" with an SSD drive installed, although I can't see that the SSD drive is being used at all with my present settings. Any thoughts?

  Read the article

• How to know why my cd is not booting?

  - by Tom Brito

  I have downloaded Ubuntu 10.10 and burned the ISO but it will not boot. I discarded problems with the ISO, as I've downloaded from the official website with no errors, and burned it with no errors. I discarded problems with the burning, as looks like it was recorded with no errors here and later in another computer. I discarded problems with my DVD reader as other cds boots fine. I'm currently using Ubuntu 9.10, I know I can upgrade via internet, but I have this same problem with my Windows XP cd, so I really would like to discover what's going on here.. My Ubuntu 9.10 cd boots just right, but the new one not. What else can be? Or what more precise tests can I make to discover where's the problem? --More info What happens when I try to boot with the Ubuntu 10.10 cd is that it behavior like there's no bootable cd in the drive. It just don't find the boot on the cd, and start the HD system. My notebook is an Amazon PC Intel Celeron 1.5 with 2Gb memory, a DVD-RW driver, HD samsung with 260GB.

  Read the article

• shutdown logging in ubuntu 10.04 & 11.10

  - by Joe

  When my system starts up it logs everything into syslog/dmesg. And I can review it for problems. When my system shuts down, where does that get logged? I didn't see anything obvious in /var/log in 10.04. (My 11.10 system is out of reach at the moment.) I looked at How do I turn on 'shutdown logging' or operating system tracing? but didn't see anything that helped. I use kubuntu, but all of the stuff at this level is probably the same.

  Read the article

• How do I disable touchpad tap to click?

  - by AWE

  You've heard this a million times but the "tap to click" is a pain in the behind and I want to disable it. There is no touchpad in gpointing-device-settings and neither in mouse and touchpad in system settings. I've tried some commands in terminal but it's all crap. Dconf-editor doesn't react. How about solving this once and for all? xinput list: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Power Button id=9 [slave keyboard (3)] ? Sleep Button id=10 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] ? Dell WMI hotkeys id=14 [slave keyboard (3)]

  Read the article

• Driver for the Intel GMA X4500HD

  - by broiyan

  I have a Dell Vostro 220s with the built-in Intel GMA X4500HD graphics adapter. I am using Maverick (10.10). My Philips 190CW 1440 x 900 pixel monitor is connected via the analog path. After a fresh installation of Maverick, this works on various resolutions but 1440 x 900 is not one of the available options. I may need a hardware specific driver. Does a GMA X4500HD driver exist that will work on Maverick?

  Read the article

• Laptop buttons not working on a Dell Latitude e6400

  - by Ido

  I have install Ubuntu 12.10 64 bit on my Dell Latitude E6400 laptop. I have the latest bios version for my laptop (A32) which I downloaded from the official Dell website by checking updates that matches the service tag on my laptop. I'm having serious problems with all the mouse buttons on my laptop. The right-click button doesn't work at all under any circumstance. The left click button only work when clicking on icons in the left side-bar and in the top menu (like clicking on the power icon in the top-right corner or clicking on the file menu). However none of the buttons work in any of the applications even simple one like the file browser (home folder). For example when I try to click on a folder inside nautilus it doesn't work or when I try to click on the "x" close icon to close the window it also doesn't work. Can you help me figure it out?

  Read the article

• Using Linux as guest on vmware and sharing connection with windows vista

  - by mike

  I been trying for weeks with vmwware player, now d/l vmwware work station 7, Have a laptop with one built in modem and a usb modem I bought, It works great switching it over from host to use in ubuntu to connect to the net, now when I use that modem from the host to connect online I have no trouble getting ubuntu to share the internet connection, But tried with NAT bridge host and all to get it to work from ubuntu to share the internet connection to windows vista, the host, I know it should work if it works the other way around, I tried setting up my wlan0 eht0 and eth1 to the correct IP can get both systems to notice each other by name and ip, but cant get them to share the connection from guest to host, I've tried iptables and all as well, Can someone please help me out with this? I am sure It is something something I'm over looking, Thanks in advance

  Read the article

• Dual monitor gnome-shell broke itself

  - by JXPheonix

  Ok, lets get this over with. I have a dual-monitor, ati setup on gnome-shell that was just fine until this morning. Then, this happened. Look closer... Whatever has happened to my ubuntu setup? My second monitor still works, entirely normally, with the exception that I cannot (obviously) access activities (as i am in gnome-fallback ). I do wish to resume my work... EDIT: By entirely normally, I mean I can move my mouse over it and have seperate windows on it and stuff. It's not mirroring. UPDATE: Unity works entirely normally.

  Read the article

• Unity Dashboard won't find local files, rearrange icons on two computers

  - by Stanton.Sculpture

  Suddenly I can't move icons around my unity launcher and the Dash won't search for my local files and folders. Was working when I first installed 13.10, but now it won't search for local files, and it won't let me rearrange the icons in any way. I've tried turning on and off all the scopes (lenses?) in multiple combinations, but it won't find any files unless I use nautilus to find them its mostly unresponsive. I can't see my recently used files, or files and folders scope at all. Dragging and dropping the icons on the side dock doesn't work, they only stick to my mouse until I put them back where they were. I cannot unlock any icons from the launcher, it just doesn't do anything when I click it. I tried rebooting both of my computers and its still won't function normally. I used ubuntu-bug -w to report a bug, no one has gotten back to me. Is there some option that I changed to cause this? This is a problem on both my laptop and Desktop. Please Help, Alex

  Read the article

• Split screen and other issues on Ubuntu 11.10 with ATI graphics card

  - by garus

  Ever since updating my Ubuntu 11.04 to 11.10 I experience issues with graphics. The biggest is the "split screen" effect where my desktop is shifted to the right, resulting in having Unity bar in the middle of the screen. As shown here: http://i.imgur.com/I8nmZ.jpg This changes from boot to boot, sometimes it's on the left, sometimes in the middle. What I tried: Removing fglrx drivers completely Installing post-update version of them, but installation is broken ATM in the Ubuntu, so no go. No one is even trying to fix it (bug report https://bugs.launchpad.net/ubuntu/+source/nvidia-common/+bug/873058 and a couple of duplicates out there) Also using the open source "radeon" driver results in the same (I have a better successful boot ratio with this one, proprietary rarely lets me boot) Other artifacts are: serious screen tearing weird lines flickering in random places lagginess Did anyone experience that? My specs: Ubuntu 11.10 AMD Radeon HD 6950 1GB

  Read the article

• How do I make Geany my default editor on Ubuntu?

  - by Programming Noob

  I actually want to change the default text editor on my Ubuntu 12.04 from nano to Geany. When I used this code: update-alternatives --config editor .. I don't see Geany in the list. So to add Geany, this is supposed to work right? update-alternatives --install /usr/bin/geany geany /usr/bin/geany 10 Also, on a side note, can you tell me if you would personally suggest me to change the default editor from nano to Geany, and why?

  Read the article

< Previous Page | 443 444 445 446 447 448 449 450 451 452 453 454  | Next Page >