Search Results

Search found 19676 results on 788 pages for 'hardware interface'.

Page 451/788 | < Previous Page | 447 448 449 450 451 452 453 454 455 456 457 458  | Next Page >

• HP ProCurve Port Mode Configuration Question Mark 2

  - by SvrGuy

  We have a ProCurve Switch 2810-48G (J9022A). We need to disable auto negotiation on two ports and manually configure them to be full duplex gige ports. From the web GUI, Configuration Tab, Port Configuration sub tab, I am only presented with the option to configure the port as Auto - 1000. I take this to mean, auto negotiate duplex, manually configure the speed to be gige. From the CLI when I try to set 1000-full I get the following error: Value 1000-full is not applicable to port 39 (or whatever port I try) The exact commands I have entered are: config interface 39 speed-duplex 1000-full BTW: speed-duplex auto-1000 works ( I also tried full-1000 and that did not work either) How do I manually configure the port such that it is manually configured to use full duplex, 1000 mbs?

  Read the article

• Filezilla FTP Server - Security Implications of its usage on Windos Server 2003

  - by Brian Webster

  I'm running Filezilla server on my dedicated windows 2003 server. It uses its own user-access control system. The Filezilla server service itself is running under the System user. When I setup users within the FTP Server Administrator Interface, I do not need to setup equivalent users, or adjust permissions on folders to allow users to login. Example: I setup TestFTP user with password 'p' I set the home directoy of TestFTP user to be e:/website I verify that e:/website only has permission for the System and Admin accounts (right click - security in windows explorer) TestFTP is able to login to the server just fine. I'm OK with this (perhaps due to ignorance?). Is it generally frounded upon to utilize a FTP Server such as FileZilla Server that bypasses the built-in UAC in this method? If I wasn't clear enough, please let me know.

  Read the article

• How to turn off the unity launch bar in ubuntu 11.10

  - by user22106

  I would like to use the unity option in ubuntu but without the unity sidebar. I've seen how I can select to use just gnome from the login screen but there are some things I like about the unity interface. E.g. From what I've seen I like the integrated application menu with the ubuntu menu up the top that unity option comes with. So I really just want to turn the launch bar off. Any help would be appreciated. Cheers, Ben

  Read the article

• Installing SDM on a Cisco 2821 ISR

  - by Sam Sanders

  I trying to change the configuration of our router, it's a Cisco 2821 Integrated Services Router. I don't know much about Cisco products. While looking at the PDF manual for the router I notices it talked about SDM Security Device Manager. But when I point my web browser at the IP address of the router, it give me a very simple web interface. It's sort of like a string builder for CLI commands. I'm guessing SDM was not installed on it. So my question how would I go about do that? I found this link (below), but I'm a bit new to networking. So any advice would be welcome. http://www.cisco.com/en/US/docs/routers/access/cisco_router_and_security_device_manager/software/quick/guide/SDMq7.html

  Read the article

• Reduce the I/O priority of Windows Backup (Windows Server 2008 R2)

  - by HelloSam

  I have a PostgreSQL running on Windows Server 2008 R2 x64 box. And I have scheduled a backup everyday from the RAID 1 DB disk to a dedicated standalone disk. They are SAS 15k on Dell PERC 6i. I am using the built-in Windows Server Backup for purpose. The problem is, whenever the backup process is kicked in, the database performance is hogged. I would say almost a 10x of performance reduction. From the resource monitor, the disk queue is in the double digit range when backing up, and less than 1 during the day. The disk activity is like ~30-50MB/s during backup, so I guess the hardware is acting normally, though wbengine.exe takes up most of the portions. I think reduce the IO priority of the backup process would be an answer, but I couldn't find a way to. Tuning process CPU priority does not seems to help.

  Read the article

• One bigger Virtual Machine in Cloud

  - by flyer

  I just setup virtual machines on one hardware with Vagrant (this is just a test environment, not production!). I want to use a Puppet to configure them and next try to setup OpenStack. I am not sure If I am understanding how this should look at the end. Is it possible to have below architecture with OpenStack after all where I will run one Virtual Machine with e.g. 12 cores? ------------------------------- | VM (12c) | ------------------------------- | NOVA | NOVA | NOVA | ------------------------------- | OpenStack | ------------------------------- | VM (4c) | VM (4c) | VM (4c) | ------------------------------- | Bare Metal (8c) | ------------------------------- I need this information to have a bigger picture to continue.

  Read the article

• Shared IMAP Folders in GMail

  - by Grinn

  Our office is using Google Apps for Domains for our email. Our customer support guys use IMAP clients (such as Thunderbird and Outlook) to check both their individual email addresses and a "collective" support email address. On the support account, there are several folders for organizing email threads by client. When a user gets a support-related email (either to the support email or their individual email address) they file away the email in one of thse shared folders. Many of us greatly prefer the Gmail interface (with Folders4Gmail enabled on the Better Gmail 2 add-on for Firefox, for label-to-folder support) over Thunderbird or Outlook. However, there is no way to "share" email threads, complete with labels, between accounts. The desired end result is that a user logs into their individual account and can see both their account and the support account and can pass emails (labels and all) between the two accounts - or at least from their individual account into the support account. Any ideas?

  Read the article

• Use Internet Explorer 6 and 7 in Virtual Box.

  - by Sharon

  Hello. I am trying to install the vhds (virtual hard drive image) of IE6 on XP and IE 7 on XP packs available from Microsoft on Virtual Box. Virtual Box will only mount CD/DVD's and/or ISO's. How do I get it to use the Microsoft files? I need this to test web pages in IE6/IE7s. I am running Windows 7 Home Premium. Is there a way to do this, or another way that will allow me to load XP/IE6 and XP/IE7 in Virtualbox Edit: Ok I got it to work but it says XP must be updated in 3 days due to hardware changes. Microsoft said this would be activated til January 1st 2010. Is there a way to bypass that?

  Read the article

• Mapping of memory addresses to physical modules in Windows XP

  - by Josef Grahn

  I plan to run 32-bit Windows XP on a workstation with dual processors, based on Intel's Nehalem microarchitecture, and triple channel RAM. Even though XP is limited to 4 GB of RAM, my understanding is that it will function with more than 4 GB installed, but will only expose 4 GB (or slightly less). My question is: Assuming that 6 GB of RAM is installed in six 1 GB modules, which physical 4 GB will Windows actually map into its address space? In particular: Will it use all six 1 GB modules, taking advantage of all memory channels? (My guess is yes, and that the mapping to individual modules within a group happens in hardware.) Will it map 2 GB of address space to each of the two NUMA nodes (as each processor has it's own memory interface), or will one processor get fast access to 3 GB of RAM, while the other only has 1 GB? Thanks!

  Read the article

• Advantages of Terminal Server instead of normal client-Server installation?

  - by Sam

  What are the advantages of using a (Windows) Terminal Server and thin clients instead of using a normal Server and full clients? So far I've only really used normal servers and clients, but now customers ask about terminal Server, and I'd like to know pro's and con's of using them instead of an "old-fashioned" client-server network. Some things I can guess: easier administration (don't need to install/update office/stuff on 20 computers but only on the server). Easier backup (no need to backup client computers). And I'd guess it would be hard (impossible) to connect and use local (like USB) hardware with Terminal Server? What else are the reasons for or against switching to Terminal Server?

  Read the article

• Why does StackExchange store images in imgur rather than its own servers? [migrated]

  - by martin's

  I am trying to understand the technical (and business) logic behind taking such an approach. Certainly SE isn't short of server or bandwidth resources. I don't think imgur is a CDN, so that can't be the reason. On the one hand one is giving up local control (meaning your files, your hardware) of the content. On the other, you don't have to use your own bandwidth, storage and resources. Then again, you depend on someone else for the reliability and up-time of your service.

  Read the article

• How do you set the Scheduled Tasks "Run only if logged in" option from the command line?

  - by Paul K

  I want to create some tasks with the "Run only if logged in" option set, but using a batch file, as you can in the user interface version of the schtasks.exe tool. I'm doing this so I don't have to specify a password, either in the batch file, or when the batch file is run... I would use /ru System but I can't because the tool I'm automating (SyncToy 2.1) won't run with that account because I am hitting a network drive... Also, I noticed that Google Chrome sets up some tasks with this option set during installation, so I'm thinking there must be a way...

  Read the article

• Print driver installs failing

  - by Kasius

  All of the Windows 7 64-bit Enterprise machines in my organization are failing to install a good number of printer drivers that previously installed without issue. This only happens with printer drivers. And not with all printer drivers. Just some. Network drivers, video drivers, etc. have had no problems. Here is part of setupapi.dev.log for a Dymo LabelWriter printer driver that is failing to install: dvi: {Plug and Play Service: Device Install for USBPRINT\DYMOLABELWRITER_450_TURBO\6&538F51D&0&USB001} ump: Creating Install Process: DrvInst.exe 09:36:58.071 ndv: Infpath=C:\Windows\INF\oem0.inf ndv: DriverNodeName=dymo.inf:DYMO.NTamd64.6.0:LW_450_TURBO_VISTA:8.1.0.363:usbprint\dymolabelwriter_450_aa08 ndv: DriverStorepath=C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf ndv: Building driver list from driver node strong name... dvi: Searching for hardware ID(s): dvi: usbprint\dymolabelwriter_450_aa08 dvi: dymolabelwriter_450_aa08 inf: Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf' ([strings]) dvi: Selected driver installs from section [LW_450_TURBO_VISTA] in 'c:\windows\system32\driverstore\filerepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf'. dvi: Class GUID of device changed to: {4d36e979-e325-11ce-bfc1-08002be10318}. dvi: Set selected driver complete. ndv: {Core Device Install} 09:36:58.133 inf: Opened INF: 'C:\Windows\INF\oem0.inf' ([strings]) inf: Saved PNF: 'C:\Windows\INF\oem0.PNF' (Language = 0409) dvi: {DIF_ALLOW_INSTALL} 09:36:58.164 dvi: Using exported function 'ClassInstall32' in module 'C:\Windows\system32\ntprint.dll'. dvi: Class installer == ntprint.dll,ClassInstall32 dvi: No CoInstallers found dvi: Class installer: Enter 09:36:58.164 dvi: Class installer: Exit dvi: Default installer: Enter 09:36:58.180 dvi: Default installer: Exit dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 09:36:58.180 ndv: Installing files... dvi: {DIF_INSTALLDEVICEFILES} 09:36:58.180 dvi: Class installer: Enter 09:36:58.180 inf: Opened INF: 'C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf' ([strings]) inf: Opened INF: 'C:\Windows\System32\DriverStore\FileRepository\dymo.inf_amd64_neutral_3a631b118b7a5828\dymo.inf' ([strings]) !!! dvi: Class installer: failed(0x00000490)! !!! dvi: Error 1168: Element not found. dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000490)} 09:37:22.063 ndv: Device install status=0x00000490 ndv: Performing device install final cleanup... ! ndv: Queueing up error report since device installation failed... ndv: {Core Device Install - exit(0x00000490)} 09:37:22.063 dvi: {DIF_DESTROYPRIVATEDATA} 09:37:22.063 dvi: Class installer: Enter 09:37:22.063 dvi: Class installer: Exit dvi: Default installer: Enter 09:37:22.063 dvi: Default installer: Exit dvi: {DIF_DESTROYPRIVATEDATA - exit(0xe000020e)} 09:37:22.063 ump: Server install process exited with code 0x00000490 09:37:22.063 ump: {Plug and Play Service: Device Install exit(00000490)} Notice these lines in particular: !!! dvi: Class installer: failed(0x00000490)! !!! dvi: Error 1168: Element not found. dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000490)} 09:37:22.063 ndv: Device install status=0x00000490 From what I have read, the "Element not found" error should be accompanied by an event describing what element was not found. The error that appears in Device Manager is "The driver cannot be installed because it is either not digitally signed or not signed in the appropriate manner." It appears to be signed fine though. It has an accompanying .CAT file and worked previously. And when installing, the following messages are logged in setupapi.dev.log: sto: {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE} 09:36:56.277 inf: Opened INF: 'C:\Windows\System32\DriverStore\Temp\{272e2305-961c-7942-9ede-966f01047043}\dymo.inf' ([strings]) sig: {_VERIFY_FILE_SIGNATURE} 09:36:56.292 sig: Key = dymo.inf sig: FilePath = C:\Windows\System32\DriverStore\Temp\{272e2305-961c-7942-9ede-966f01047043}\dymo.inf sig: Catalog = C:\Windows\System32\DriverStore\Temp\{272e2305-961c-7942-9ede-966f01047043}\DYMO.CAT sig: Success: File is signed in catalog. sig: {_VERIFY_FILE_SIGNATURE exit(0x00000000)} 09:36:56.355 sto: Validating driver package files against catalog 'DYMO.CAT'. sto: Driver package is valid. sto: {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE exit(0x00000000)} 09:36:56.402 sto: Verified driver package signature: sto: Digital Signer Score = 0x0D000005 sto: Digital Signer Name = Microsoft Windows Hardware Compatibility Publisher Now here's where it gets strange. If I take it off the domain, it installs fine. But it doesn't seem to have anything to do with Group Policy. I moved the machine to an OU that blocks inheritance, ran a gpupdate, ran rsop.msc to verify, and tried again. And it still didn't work. Likewise, I removed a machine from the domain, manually set all of the domain Group Policy settings in gpedit.msc, and tried that way, and it worked fine. So it seems like the Group Policy settings are irrelevant. What other domain-related issue could be causing this though? Any ideas on what to try next would be greatly appreciated. I'm not sure where to go from here. Thanks!

  Read the article

• Can a virtual mikrotik box bridge a hyper-v internal network with a hyper-v external network?

  - by mcfrosty

  I am trying to set up a Mikrotik router as a transparent firewall on my network. I got the machine working on a hardware MT box, but my boss wants the MT virtualized. I have been trying the set up where my virtual windows box talks to the Mikrotik via private or internal network on the Hyper-V host. I can get the two machines to talk, but as soon as I set up a bridge on the MT, all traffic ceases between the two. Is it possible to create a bridge for this purpose (having the MT silently in front of my firewalled server)? I could really use some help.

  Read the article

• Failures when copying between two external drives on the same controller

  - by Krzysztof Kosinski

  I'm encountering a weird problem which is present both on Ubuntu 9.10 and 10.04, on two different machines. When trying to copy between two external drives connected to the same USB controller, the transfer will randomly hang at some random time (after copying 300MB, 1GB, 10GB - it doesn't appear to depend on the dataset being copied). The hang appears to happen faster in 10.04. It appears to happen slower if both drives are connected to a hub. If the drives are connected to 2 distinct physical ports on the machine, the hang will be very fast. Hangs cannot be reproduced if: Data is copied from the first external drive to an internal drive, then to the second external drive Drives are connected to different USB controllers, for example the first one is connected to the built-in controller and the second one via an external PCMCIA controller. lspci says the first machine has an Intel ICH9 USB controller, the second an Intel ICH4. Is this a hardware problem, a kernel problem or a software issue? I used Nautilus when copying the files.

  Read the article

• SATA Backward compatibility? [closed]

  - by Fladur

  Possible Duplicate: Can I connect a SATA-II hard drive to a SATA-I connection? Hello everyone One of my system is really old, but I still use it, right now, the HDD is and old IDE drive that is starting to fail (I got to many damaged sectors) and I'm planing to replace it. The motherboard supports Serial ATA 1 and I have a real nice offer on a SATA 2 drive, can I use that drive on a SATA 1 interface (obviously with reduced speed) just like a USB 2.0 device on a 1.0 port? Thanks in advance.

  Read the article

• WOL not working

  - by Maciej Swic

  I have a Marvell Yukon integrated NIC and i have installed the WOL package on my freeBSD-based NAS. I'm trying to wake my PC using the command "wol M:A:C:A:D:D:R". Command line spits back that it is "waking" however nothing happens. I found no reference to WOL whatsoever in BIOS and i enabled Magic Packet WOL in windows on that interface. Also double-checked MAC addr and that i entered it in the correct format in "wol". I'm on Windows 7. What next? =/

  Read the article

• Mac Mini 1.66 no sound on Windows 7

  - by Steph

  I've tried everything I could to get the sound working. I've tried to install the drivers from the Snow Leopard disk, then I went and got the latest RealTek drivers from the RealTek website. Then I read that old Mac mini's could have an integrated Cirrus chip, and I tried to grab the latest driver from the website, and it appeared to install, but nothing. There's also nothing listed under Sound and ... in the Device Manager. I've tried to manually include a legacy driver, which worked for RealTek but not for the Cirrus driver. Of course it said there was no RealTek hardware install, which makes me think it's a Cirrus chip. Any further suggestions or thoughts would be really appreciated. This is a Mac Mini 1.66. I'm also not sure how to be able to detect what card is integrated into the system, so that would be helpful too (remembering that there's no driver installed). Even just to get the chip type would be great to confirm.

  Read the article

• My Intel Core i3 frequently shuts down due to "Processor Thermal Trip error"

  - by explorest

  My Desktop PC running Windows 7 on Intel Core i3 dual processor machine started shutting down during the boot process a couple of days ago. I left it alone for about 48 hours and tried again. The boot process informed me about Processor Thermal Trip as being the cause of boot failures and suggested a Windows recovery process. I went through the recovery process which completed without problems. The PC booted normally and Windows 7 worked as expected but after 10 minutes it again tripped and now whenever I start it, it shuts down during the boot process. What should I do next?... is there a boot menu / setup settings that needs to be adjusted to avoid it... Or is there a hardware problem (which seems unlikely as the machine occasionally boots perfectly )?

  Read the article

• Ubuntu 10.04 install - frozen at splash, no errors

  - by Andrew Bolster

  Has anyone else come across this? After about as much of a fresh install as i can muster without buying new drives, and after walking through the amd64 alternate install with ease, and after a little 'pre-splash' screen where the orange dots under the (very sexy) new ubuntu logo blink away, I'm left with a vista of purple hues and logo plonked in the middle, with the dots not going anywhere. I was at this same position last night at 3 in the morning, left it lying overnight, and nothing had changed, so I'm pretty sure its frozen, the virtual terminals are not accessible, ie, c+a+F1 etc does nothing, but when i go in and inspect /var/log/* in the recovery console by booting off the installation cd, no errors, no complaints, no problems. I'm at my wits end and am just about ready to try anything. If this was on SO I'd be bountying, but if anyone can help you'll just have to cope with my thanks! Additional Details on my blog and my first attempt at asking for help Update: I can reasonably say it is not a hardware fault, as a full install of 9.10 with dual screen nvidia xinemara indicate that nothing is wonky

  Read the article

• Free IP address management software

  - by TiFFolk

  We are choosing a system for managing our IP address space. So we are looking for a special free software like IPPlan. So what we have nowadays: Ipplan (Does not support IPv6) SolarWinds IP address tracker (IPv6 support unknown ) IP module of The NOC Project (BTW, take a look of it, seems to be very promising project) (IPv6 support unknown ) phpIP (Does not support IPv6) IP management from RackTables (Does not support IPv6) Do you know about any other special software, like written above? But: No Wiki No DNS No DHCP No spreadsheet Software should provide: Clear view of available addresses Detail listing of all addresses by subnets/search pattern/owners/additional info It must support adding additional info like owner of IP, domain-name, contacts, etc Multi user support Easy interface Software has to be specially written for address management. Scalability Any OS: win, lin, sol, web

  Read the article

• Configuring Ubuntu for Global SOCKS5 proxy

  - by x50

  Does anyone know the best way to configure Ubuntu to use a SOCKS5 proxy for all network traffic? Server is ubuntu server - all cli. So I cannot set via the Proxy Settings GUI. We want to push all outbound traffic through the proxy (apt-get, http, https, etc). I do need to separate ssh traffic so it stays locally. Everything else should hit the proxy server. not that it matters, but I'm using Squid for the proxy server. I know this is easy on Mac and Windows as you can set a proxy on the actual network interface. Can you do the same on Ubuntu?

  Read the article

• Static Routes and the Routing Table

  - by TheD

  This is very much a learning question if someone would be happy to explain a couple of concepts. My question is - the default routing table that exists in, in my case, a default Windows 7 install, what do each of the routes in the table do? Here is a screenshot: The 10.128.4.0 is just a route I've added while messing. I understand from a question I posted on Superuser the first route is just a default route that will route all traffic for any IP to my default gateway on my Interface in use. But what about the others? And how would the routing table handle a machine with multiple NIC's, perhaps connected to two different networks, or maybe even two NIC's on the same network so a VM can have a physical Network card instead of each VM sharing the hosts. Thanks!

  Read the article

• What are the "must " security tools for small organizations ?

  - by Berkay

  One of my friend has started a company, it's a small-scale company that has a 40 workers.There is two guys also responsible for the security and IT related issues.He is managing the LAN, Webpage of the company, e-mail configuration, printer hardware modification, application deployment etc. In this point, to provide the security measures including access controls, authentication, web server security etc. Which tools do you use for securing, monitoring and controlling the system ? Are you paying for these tools or are they open source? This question is due to the security administrators requests to my friend.He offers to get some tools for the company and my friend hesitates to pay that much on them (what he mentioned me.)

  Read the article

• Calculating Cloud Service Costs [closed]

  - by capdragon

  Possible Duplicate: Can you help me with my capacity planning? I would like to scale a web application to the Cloud and wanted to know if anyone had any experience calculating costs and could tell me how I would go about that. I have NO experience with cloud services at all. Currently my production environment consists of two web servers and one database server. If the application continues on a linear growth path, eventually, I want to scale to the cloud to avoid any more long term commitments to extra hardware. I want to be able to create a similar environment I have now as a baseline. Have this as my fixed cost that I will always have. I also want to calculate my variable costs that will increase with more users or bandwidth. I don't have a preferred cloud vendor. Amazon, Rackspace, Terremark or any other is fine as long as understand how to calculate my fixed and variable costs.

  Read the article

< Previous Page | 447 448 449 450 451 452 453 454 455 456 457 458  | Next Page >