Search Results

Search found 19676 results on 788 pages for 'hardware interface'.

Page 455/788 | < Previous Page | 451 452 453 454 455 456 457 458 459 460 461 462  | Next Page >

• What are the best options for a root filesystem hosted on SSD under Linux

  - by stsquad

  I'm working on an embedded system which is going to be booting and hosting it's rootfs on an SSD disk. We are currently looking at using Intel X-18M SSDs. The file system structure will have a fairly static /usr section (modulo software upgrades) and an active /var and /var/log for maintaining state and logging. Given the wear-levelling done by the underlying flash does having separate partitions help or hinder? As modern SSDs appear as straight block devices and hide their mapping magic behind their firmware is there any point trying to optimise the choice of file-system that sits on-top of the SSD? Finally does enable SMART monitoring make any sense in this context or are their SSD specific ways of determining the underlying health of the storage hardware?

  Read the article

• Determining currently-serving files in IIS 7

  - by Nat Papovich

  serverfault showed me this topic, and I think I want to do the same thing, but in IIS, not Apache. I have a "dashboard" application I'm building and I want it to show what files are currently being served by IIS. They'll mostly all be large files. I believe that the ILogScripting COM Interface would have been one good place to start, but it's not available in IIS 7, and it relies on the underlying IIS logs for its data. And therein, I believe, lies my problem. How do I make IIS put in, essentially, two log entries, one as the request begins, and one when the connection is closed? Also, it looks like IIS doesn't "commit" log entries as they're occuring, in "real-time". There's some kind of delay/batch-job. That will cause a problem for me too. Or do I need to do something in isapi instead?

  Read the article

• How can I login to Ubuntu using a USB serial port?

  - by marc

  How can enable remote terminal login into Ubuntu 9.10 using a USB serial port? I created device /dev/ttyUSB0 and i want to allow logins using Hyper-Terminal. I found some resources but they are related to real hardware rs232 ports. I can't find any information about USB converter. So far I have established connection between that USB-serial port and my laptop. I can send text to the port (cp sometext.txt /dev/ttyUSB0) and read it using hyperterminal. What do I need to do to enable logins on this port?

  Read the article

• Windows 7 Via Hyperion 4-1 drivers

  - by Gratzy

  I have a clean install of Win 7 on some relatively old hardware. Everything works pretty well however my cpu is pegged at 100% most of the time. Task Manager shows srvchost as being a main culprit of course but also system interrupts. I have a Biostar socket 478 MB with Via chipset. I have tried to find Windows 7 drivers for this but when I download and try to install what VIA/BIOSTAR say should be good for all OS's it will not load. I get a message saying can't find components for this OS. Anybody have any idea where I might find suitable drivers for the Chipset? BTW I'm not using the integrated graphics on the board but have a radeon 4500 pci-e card.

  Read the article

• Slow old notebook Hardy => Karmic

  - by Mailo

  Hi, i have one very slow notebook from year about 2000. On the computer is running icewm with firefox (in this times chromium for testing). My question is if it's good step to upgrade the system to Karmic Koala? I can't install another OS on that. It doesn't have CD-ROM, it can't boot from flash, or network. The new wanted state is little bit faster system for browsing web and copying photos to local NAS. I don't mention hardware configuration, becouse it's real speed is really deep below the paper parameters.

  Read the article

• SNMP counter issues with cisco RV082

  - by Chance

  Does anyone else poll this router with SNMP? We are using firmware version: 2.0.0.19-tz We are having problems with the traffic counters, some of them appear to be implemented as 16 bit counter instead of 32 bit counters. The reason this is causing problems is that they roll over (at 65,000) to 0 in less than our minute polling cycle, really skewing our metrics. The counter for the Lan (interface 2) seems to be functioning properly, however interfaces 3 and 4 (WAN and DMZ / WAN2) rollover at 65000. Tue May 11 08:38:31 EDT 2010 IF-MIB::ifInOctets.1 = Counter32: 137634 IF-MIB::ifInOctets.2 = Counter32: 1865677943 IF-MIB::ifInOctets.3 = Counter32: 12450 IF-MIB::ifInOctets.4 = Counter32: 49354 Look at counter IF-MIB::ifInOctets.4 5 seconds later: Tue May 11 08:38:36 EDT 2010 IF-MIB::ifInOctets.1 = Counter32: 137634 IF-MIB::ifInOctets.2 = Counter32: 1865836207 IF-MIB::ifInOctets.3 = Counter32: 13167 IF-MIB::ifInOctets.4 = Counter32: 12900 Any suggestions? Seems like a bug to me, however I just wanted to make sure I wasn't crazy.. Thanks!

  Read the article

• Transferring Windows XP Mode VM to Another Machine?

  - by Omar Kooheji

  I've been running Windows XP mode on my Windows 7 Laptop for a while now and I've got my VM set up just how I like it. I am switchign laptops due to an intermittent hardware failure. Is it possible to transfer my Windows XP mode VM to my new laptop? I know it's just a Windows Virtual PC VM, how would I go about transferring it if this is possible? Will the Fact that I'm moving from Windows 7 Ultimate to Windows 7 Pro make a difference? AFAIK they both support Windows XP Mode.

  Read the article

• How to display programs, started by TSWA Remoteapp, inside a browser instead of directly on the desk

  - by richardboon

  For those not familiar with Terminal Services Web Access and Resulting Internet Communication in Windows Server 2008, here’s a brief overview: technet.microsoft.com/en-us/library/cc754502(WS.10).aspx The problem (I am trying to solve), can be seen in the picture of step 16, where the application is display directly right on the desktop [see link below]: http://blogs.technet.com/askcore/archive/2008/07/22/publishing-the-hyper-v-management-interface-using-terminal-services.aspx I am in the process of setting up Terminal Service Web Access RemoteApp for our company. Users only want remoteapp and needs to see the remote program running within/contain-inside the browser. They don’t want to see or access the whole desktop [as the case with remote desktop, which can be displayed inside a browser].

  Read the article

• Controlling an amplifier power supply from Squeezebox/SqueezeCenter

  - by teabot

  I have a Squeezebox that is connected to an amplifier. I'd like the amplifier to switch on/off whenever the Squeezebox is powered on/off. I don't mind writing some plugin code to SqueezeCenter to do this but in hardware terms I am looking for off-the-shelf components. I imagine that I need some kind of Ethernet controlled power outlet. I have looked at X10 (I can't bring myself to link to their terrible site), but their product range seems extremely confused and it looks as though I'd have to use both RF and comms-over-mains to implement a computer controlled socket. Does anyone have any alternative suggestions? Note: Any components should be available and certified for use in the UK.

  Read the article

• Connect devices plugged into Raspberry Pi ethernet to WiFi network

  - by Tom

  I'm just starting out on a mission to learn more about networking and I've followed a tutorial (http://raspberrypihq.com/how-to-turn-a-raspberry-pi-into-a-wifi-router/) to turn my Raspberry Pi into a wifi router. That worked really well so I modified it slightly so that I can use a tethered iphone for the internet connection - I just switched all "eth0" references to "eth1" (the iphone interface) and added a script to set everything up when the phone is plugged in. This setup has freed up the Pi's ethernet port so I'd like to try and take this a step further and allow devices plugged into it to connect to the network. If possible, I'd like to try adding a switch so I can connect multiple devices. I've tried fiddling around with nat & iptables with no luck so my question is, how can I connect devices on eth0 to my wlan network?

  Read the article

• Free IP address management software

  - by TiFFolk

  We are choosing a system for managing our IP address space. So we are looking for a special free software like IPPlan. So what we have nowadays: Ipplan (Beta IPv6 support) SolarWinds IP address tracker (IPv6 support unknown ) IP module of The NOC Project (BTW, take a look of it, seems to be very promising project) (IPv6 support unknown ) phpIP (Does not support IPv6) IP management from RackTables (Does not support IPv6) Do you know about any other special software, like written above? But: No Wiki No DNS No DHCP No spreadsheet Software should provide: Clear view of available addresses Detail listing of all addresses by subnets/search pattern/owners/additional info It must support adding additional info like owner of IP, domain-name, contacts, etc Multi user support Easy interface Software has to be specially written for address management. Scalability Any OS: win, lin, sol, web

  Read the article

• Easily recreate a server's "state" [closed]

  - by Brandon Wamboldt

  I want the ability to setup new servers for dev/testing/prod very easily. The reasons for being able to setup a new dev VM is obvious, but for prod my concern is adding a new production server/migrating to a new server. I assume a traditional backup solution won't work as hardware may be different so the binaries/config might be different. I want to get experience with puppet anyways, so I was thinking about creating a manifest that would setup my users, install Postgres, Nginx, PHP-FPM, etc, and configure them the way I specify. Then I could install puppet on a new server, copy down my manifest and apply it locally. This would make keeping my server configs in sync easier too. Is there a better approach I'm not aware of, and does my approach have any pitfalls?

  Read the article

• Thomson TG585v7 router - promiscuous mode

  - by Nikita

  I have a TG585v7 as a router with several machines plugged into it. In the default setup, the packets are only delivered to the specific machine but I want to be able to setup to monitor all network traffic on one of the machines, i.e. I need those packets to be picked up when my ethernet card is in promiscuous mode. Is this possible? Guide here has this "mcastpromisc Make the IP interface multicast promiscuous. OPTIONAL", is this what I am looking for? Does it mean I need to manually add all my machines by their MAC addresses to be able to receive packets destined for them? Or am I out of luck and I need to get a better router?

  Read the article

• Why doesn't my sound card start? It reports code 10.

  - by Sarim Ali

  When I installed the XP for first time my sound card was working fine. But only after the first reboot it has stopped working. Under Device Manager, the section "sound video and game controller" the entry YAMAHA Native DS1 WDM Driver, has a exclamation mark on it. On left clicking and selecting properties it shows this message "This device cannot start. (Code 10)". On trying to update driver it says a better driver can not be found. Any idea how I can solve the issue? Update: As suggested by harrymc I uninstalled the device "YAMAHA Native DS1 WDM Driver" , and scanned for hardware changes. The windows detected and installed the soundcard and it started working properly.BUT, after restarting the same problem occurs. So, now everytime I reboot the computer I am stuck to, repeating the process of uninstalling the device to make it work.

  Read the article

• Force10 S60 remote management

  - by StaringSkyward

  We've got a Force10 S60 switch to replace an older Cisco. I can't find a way to give the switch itself an IP address on the local VLAN so I can ssh to it. The config guide talks about using either a management interface on a separate management network or dedicating e.g. a gigabit port as a management port with a dedicated IP address. Ideally I would like to do what we do currently with the Cisco switches, which is in effect give the entire switch an IP so it can be reached from any host on the same VLAN without having to use up a physical port on the switch or physically connect the management port to another device. Is this possible with the S60 and if so, how would you give it, say the address 10.0.1.1 in vlan 10 (10.0.1.1/24)? Thanks!!!

  Read the article

• CPU I/O communication part 2

  - by b-gen-jack-o-neill

  Hi, I was suggested when I have some further questions on my older ones, to create newer Question and reffer to old one. So, this is the original question: CPU I/O communication OK, I have just 2 more questions. 1, How is MMIO set? I mean, lets say I have developed some extension card with PCI interface. How do you say to memory controller to redirect desired memory space to my card´s RAM? I mean, I think standart text-mode VGA MMIO adress is 0x8000. Is this HW set (every motherboard automatically redirects 0x8000 adress to PCI-E) or its just standart and can be changed (VGA says to motherboard: give me memory mapped IO at 0x8000) 2, Can one expansion card have more MMIO connections? I mean, lets say I have card with 10 Bytes of RAM. Can Bytes 0-4 be mapped to 0x0 and bytes 5-9 to 0x5000? Please, if you know about some good article about this, please post link. Thanks.

  Read the article

• Virtual box lost files

  - by Paul Lloyd

  I have been running Virtual Box on a Macbook Pro for a year or more, with an old version of Windows XP running on the virtual machine. Recently my Mac battery dies completely and I had left VB / Windows running. When I re-started the Mac, VB would not load. I reinstalled a recent download of VB from a DMG file I had stored. Now VB starts but when I try to start the virtual machine I get the following message, Failed to open a session for the virtual machine Windows XP. Failed to load VMMR0.r0 (VERR_SUPLIB_WRITE_NON_SYS_GROUP). Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} I have been backing up the MAC using Time Machine and have backups going back months. I really need to access the windows files as they have my Accounts and other business critical stuff. Any ideas please, or does anyone know where I can get some support for this combination of hardware / software, apologies I am a novice in this area. Thanks in advance.

  Read the article

• arcserve vs backup exec vray

  - by Luigi

  I have to buy one backup software to backup a vmware environment with the following server/applications: mixed microsoft windows 2003/2008/2012 server standard environment sql server 2005/2008 mixed linux centos/ubuntu servers postgresql sap environment exchange 2007 linux fileservers windows fileservers active directory random applications/sqlserver/fileserver on workstations xp/7/8 my hardware is: 5 blades on ibm bladecenter, various san, lto4 on 4gbit fiber channel connected to a windows2003 blade where I will install the backup software (backupexec or arcserve). What are your advice and comments over backupexec vray or arcserve choice ? I know that arcserve have a lower price. I used backup exec for some years but I found it pretty complicated. Thank you.

  Read the article

• How to capture footage from an analog TV?

  - by hope

  I have only an old analog TV with just RCA connectors and a coaxial/cable in/out wire. It uses no HDMI interface, etc. I would like to know the cheapest method possible where the current video footage can be transferred and made into a target digital video file format and be copyable/transferrable via USB. Are there any devices that can do this with an analog TV? Basically, how can I get something along these lines done and for cheap?P I do NOT want to stream; I want footage recorded off the TV and stored via a digital encoding of a video file.

  Read the article

• Linux Logitech QuickCam Pro 9000 - microphone issues

  - by drahnr

  I got a Logitech Quickcam Pro 9000, the cam itself is working as it honors the UVC spec. This fancy WebCam has a integrated mic which worked some time before but now, it does no more. (Note: I use pulseaudio as it is a USB Mic and I am not really keen on the hassle of ALSA setup) Things I check already are if it gets detected at all: $ lsusb |grep Logi Bus 002 Device 002: ID 046d:0809 Logitech, Inc. Webcam Pro 9000 is muted in alsa-mixer - not the case, volume at 100 pavucontrol shows it too, but no input level bar! On top of that, if I open the gnome3 (fallback mode) audio panel(from the desktop panel), and disabel/reenable it in the hardware tab, it works "for some time"... Any hints? Any ideas? I am really out options for now, and the fact it worked like 6 months ago (perfectly) makes it no better.

  Read the article

• Should my servers boot from VHD?

  - by tony roth

  I've been testing native vhd boot on several servers. It seems to be pretty transparent in terms of deployment and with my seat of the pants testing I have not noticed any difference in performance. The main reason that I want to boot vhd is due to their transportablility between different hardware and to hyper-v servers. the following roles will be installed. dfsr dhcp iis application server dc <- haven't tested this yet but see no reason why it won't work. With the above low impact (in terms of performance) roles do you thing booting from VHD is appropriate. thx

  Read the article

• How can I access shared XP files over wifi with an Archos 5 Internet Tablet with Android?

  - by Fred

  I have an Archos 5 Internet tablet with Android. I have been using it to stream video over my XP wifi network. Yesterday the Archos stopped seeing any of my computers. I have found some programs that allow me to see the network, so I know the hardware works. However, this program does not allow me to pick the correct program to play the files I want. I suspect the problem lies somewhere on the XP side. This would probably work better if the Archos 5 allowed me to manually input the IP address. Help?

  Read the article

• How can I access shared XP files over wifi with an Archos 5 Internet Tablet with Android?

  - by Fred

  I have an Archos 5 Internet tablet with Android. I have been using it to stream video over my XP wifi network. Yesterday the Archos stopped seeing any of my computers. I have found some programs that allow me to see the network, so I know the hardware works. However, this program does not allow me to pick the correct program to play the files I want. I suspect the problem lies somewhere on the XP side. This would probably work better if the Archos 5 allowed me to manually input the IP address. Help?

  Read the article

• How to connect to WPA2 encrypted wireless-network when booted from CloneZilla Live-CD?

  - by caligula

  My intention is to perform a backup of my laptop's (Dell Vostro 3350) sda1 disk to my desktop. After some googling I decided to use CloneZilla for that purpose. I have an OpenSSH server installed and running on my desktop. So I inserted CloneZilla CD to CD-rom, booted from it, then chose an option smth like "use ssh server to store image". Then I got an invitation to choose a network interface. I chose wlan0 and entered shell to manualy configure connection. And that's where I got into trouble, for wifi-network which I wanted to use is WPA2-encrypted, and I don't know how to connect to it from command line. Can somebody assist me. Appreciation for advance.

  Read the article

• TP-LINK-8901 modem does not connect automatically; only works in bridged mode [closed]

  - by Arash

  Possible Duplicate: Cannot Connect To Internet In Automatic (pppoe) Mode Of Modem My TP-LINK-8901 modem does not connect to internet with "always on" (automatic) connection. I have to put it in bridge mode and make a connection in Windows to connect to internet. Also, there is no configuration problem. What I did: Reset modem Update firmware Is there any way to solve the problem myself, e.g. through hardware or software? I can't have it repaired because the warranty already expired.

  Read the article

< Previous Page | 451 452 453 454 455 456 457 458 459 460 461 462  | Next Page >