Search Results

Search found 19676 results on 788 pages for 'hardware interface'.

Page 454/788 | < Previous Page | 450 451 452 453 454 455 456 457 458 459 460 461  | Next Page >

• Quiet Sound while recording using the "Stereo Mix" option on Windows XP.

  - by DragoonX

  I'm trying to record some of my work, and the video capture program I'm using works fine. It's HyperCam2, and since it's not really professional, I don't care about that little thing in the corner. Anyways, If I check the record sound option and put it on the highest quality, and I want it to record the sounds playing from my computer, I have it record the "Stereo Mix" setting. However, after a quick test, I saw that even though my computer was at max volume, the recorded sound was very quiet, almost inaudible. Thinking it was just HyperCam, I downloaded Audacity, and only met similar results. While I'm not entirely savvy with hardware, I BELIEVE this to be my soundcard: SoundMAX Integrated Digital HD Audio

  Read the article

• configure cisco catalyst 3560g with an egress uplink

  - by imaginative

  Currently my setup has our egress uplink connected directly to an external interface on a linux router/firewall/nat gateway. Since the linux box is a single point of failure, I've since setup two openbsd boxes using carp+pf+pfsync in order to gain some additional redundancy. the problem is, I only have one egress uplink (it's still a single point of failure) but need to get it to speak to the active carp node in my openbsd cluster which will server as my new router/firewall/nat cluster. Is there anything specific I need to do on a 3560G in order for me to be able to: 1) Drop the egress uplink into a port 2) Drop one link from the switch to a firewall 2) Drop a second link from a switch to the firewall This is so if one box dies, the other still has the egress link to the switch. Is putting them into one VLAN enough? Anything else that needs to go into the configuration for this setup to work?

  Read the article

• Unable to access Citrix XenApp 6 published applications externally

  - by Christopher McCann

  We are trying to use a trial of Citrix XenApp 6 Fundamentals to virtualise a couple of applications as a proof of concept. We haven't ever used it before so I confess to be a noob with it. We can connect to the XenApp web interface, and the iPad app will connect and list the applications, but the applications themselves will not load. I discovered in the .ica file that it was attempting to connect to the internal IP address of the server instead of its static external. I have been following various threads on Citrix but nothing seems to have fixed it for me. The server is deployed on an EC2 instance with a static elastic IP. All the ports are opened and I can telnet into the XenApp server on 1493 and I get the ICA response. I have also run on ALTADDR and provided the external IP address. Does anyone have any ideas?

  Read the article

• How to avoid Memory "Hard Fault/sec"

  - by Flavio Oliveira

  i've a problem on my windows 2008 server x64, and i cannot understand how can i solve it. i'm looking to Resource Monitor and see about 100 to 200 hard faults/sec. and generally the machine is slow. As i've readed a bit it is caused by a "memory Page" that is no longer available on physical memory and causes a io operations (disk) and it is a problem. The current hardware is a intel core2duo E8400 (3.0GHz) with 6GB RAM on a Windows Server Web 64-bit. Actually the machine have about 2GB Ram used what having 4Gb available to use, Why is the machine requires that high level of Disk operations? what can i do to increase the performance? Im experiencing a memory issues? what should be my starting point?

  Read the article

• Cisco Pix does not let traffic pass from outside to inside even though ACL permits

  - by Rickard

  I have tried to make my pix 515 allow traffic from outisde interface to inside, but despite permitting ACL's, it doesn't seem to let traffic through. (It is letting traffic out as it should though) I am have tried both of the following: access-list acl_in extended permit tcp any host 10.131.73.2 eq www and access-list acl_in extended permit ip any any None of them help, but I can access 10.131.73.2 from any host on the inside network. This is a one single host on the inside that should every now and then have an HTTP server running for development purpouses, so it doesn't need to reside on DMZ (and as far as I know, I can't place it on DMZ either as it's in the same subnet as the other ip's I have. Could I have missed anything? I am using PIX Version 8.0(4) My current running config looks like this: http://pastebin.com/TvRFyDrF Hope someone can help me get this working.

  Read the article

• Setting up Windows 2008 with VPN and NAT

  - by Benson

  I have a Windows 2008 box set up with VPN, and that works quite well. NPS is used to validate the VPN clients, who are able to access the private address of the server, once connected. I can't for the life of me get NAT working for the VPN clients, though. I've added NAT as a routing protocol, and set the one on in the VPN address pool as private, and the other as public - but it still won't NAT connections when I add a route through the VPN server's IP on the client side (route add SomeInternetIp IpOfPrivateInterfaceOnServer). I know I can reach the server's private interface (which happens to be 10.2.2.1) with remote desktop client, so I can't think of any issues with the VPN.

  Read the article

• VPN using Zywall

  - by Rune FS

  I've played around with a certificate based VPN (normally I don't do hardware) we've manged to setup the connection and the tunnel between the routers is working correctly. We now need the last step. There's no connection to the computers on the other end. What could we have forgotten? (we're testing with two standard configured Win7 machines) EDIT: Just to clarify the tunnel is working I can ping the router on the other end. I can't access the computers on the other side of that router and vice versa. (It's also possible to access the remotemangement console of the remote router on the LAN IP)

  Read the article

• How to connect to WPA2 encrypted wireless-network when booted from CloneZilla Live-CD?

  - by caligula

  My intention is to perform a backup of my laptop's (Dell Vostro 3350) sda1 disk to my desktop. After some googling I decided to use CloneZilla for that purpose. I have an OpenSSH server installed and running on my desktop. So I inserted CloneZilla CD to CD-rom, booted from it, then chose an option smth like "use ssh server to store image". Then I got an invitation to choose a network interface. I chose wlan0 and entered shell to manualy configure connection. And that's where I got into trouble, for wifi-network which I wanted to use is WPA2-encrypted, and I don't know how to connect to it from command line. Can somebody assist me. Appreciation for advance.

  Read the article

• Ubuntu 10.04 install - frozen at splash, no errors

  - by Andrew Bolster

  Has anyone else come across this? After about as much of a fresh install as i can muster without buying new drives, and after walking through the amd64 alternate install with ease, and after a little 'pre-splash' screen where the orange dots under the (very sexy) new ubuntu logo blink away, I'm left with a vista of purple hues and logo plonked in the middle, with the dots not going anywhere. I was at this same position last night at 3 in the morning, left it lying overnight, and nothing had changed, so I'm pretty sure its frozen, the virtual terminals are not accessible, ie, c+a+F1 etc does nothing, but when i go in and inspect /var/log/* in the recovery console by booting off the installation cd, no errors, no complaints, no problems. I'm at my wits end and am just about ready to try anything. If this was on SO I'd be bountying, but if anyone can help you'll just have to cope with my thanks! Additional Details on my blog and my first attempt at asking for help Update: I can reasonably say it is not a hardware fault, as a full install of 9.10 with dual screen nvidia xinemara indicate that nothing is wonky

  Read the article

• RAID P410i and P812 performance issues

  - by Alexey

  I'm having much trouble with I/O performance of HP DL360 server with two RAID controllers - P410i and P812, Windows Server 2008, 36 GiB RAM and 16 x Intel Xeon x5550. The server runs a bunch of tasks producing heavy sequential I/O, and after about 20-30 minutes of intensive work it looks like the tasks are stuck, not using CPU and with enough free memory (so this cannot be a bottleneck). The same tasks were running quite well on the older server (Windows Server 2003, 4 x Intel Xeon, 12 GiB RAM). RAID cache is present, write-cache battery is installed. Cache is configured as 25% readahead/75% writeback. The swap file resides on the logical disk served by P410i and other logical disks are on P812. Can someone tell me what can be the matter of this? Is this a hardware problem or misconfiguration?

  Read the article

• How a password is transmited to AD Server

  - by erdogany

  My question is how ADSI performs SetPassword operation. According to what I have read ADSI is a COM interface and it has more capabilities than AD provides through LDAP. While you are suppose to update unicodePwd attribute of a personaccount entity through LDAP, ADSI provides you SetPassword call. I know that ADSI & AD provides Kerberos during authentication. So how the password is transmitted to server when SetPassword is called? Is it raw binary unencrypted data? Or does Kerberos comes into play at this call?

  Read the article

• Program to download .torrent file from a Magnet URI?

  - by robmathers

  I have a Torrent app running on my home server that has an outdated but pretty useful web interface. The one problem is that it doesn't take magnet links, only .torrent files. I'd like to continue using this and not have to bother with finding a different program. Given that magnet links are just a pointer to download the torrent file from the swarm, I'm hoping there's a program out there that will take a magnet link and spit out a .torrent only. I know I could put it into µTorrent and grab the file from the app's directory, but that's a bit roundabout, and I'd like something that will do it semi-unattented. Preferably for OS X, but Linux (or a web app) would work too.

  Read the article

• Which are the non-x text editors in Powershell?

  - by Andrei T. Ursan

  Are there some editors like emacs, vi/vim, specifically for power shell, if so which are the best? I will have to do some work on windows and I need some unix productivity - which means for me shell + text editor with syntax highlighting (for python, java, c, c++), so which are my options? Edit: I'm looking for an alternative at vim or other unix editors, and cygwin is not an option. I just want from the command line to say texteditor_name file1, modify it, save it etc, and all of these to happen inside the terminal, not in another interface etc.

  Read the article

• xinet vs iptables for port forwarding performance

  - by jamie.mccrindle

  I have a requirement to run a Java based web server on port 80. The options are: Web proxy (apache, nginx etc.) xinet iptables setuid The baseline would be running the app using setuid but I'd prefer not to for security reasons. Apache is too slow and nginx doesn't support keep-alives so new connections are made for every proxied request. xinet is easy to set up but creates a new process for every request which I've seen cause problems in a high performance environment. The last option is port forwarding with iptables but I have no experience of how fast it is. Of course, the ideal solution would be to do this on a dedicated hardware firewall / load balancer but that's not an option at present.

  Read the article

• VPN Connects with local access only

  - by user20102

  I have Windows Server 2008 and I have set up a VPN. When a user logs into their VPN they can not view the internet. It comes up as local access only on the the client PC. On the server when I go to the Network And Sharing Centre it displays (Network) with local and internet below it has the RAS Dial-in interface and it displays as local only there as well. I want all users that connect to my VPN to have internet access (full access). If anyone can help me it would be appreciated. Also I've activated dial-in properties and I've done it via policy who can access the VPN and internet. It still doesn't work, but there is a connection but just local only. Thanks

  Read the article

• Any good PostgreSQL client for linux?

  - by senotrusov

  stackoverflow points me "belongs-on-serverfault" on this, so crossposting. I am frustrated of not having a good Linux GUI administration and development tool for PostgreSQL. pgAdmin III is buggy and unusable piece of... hmm, software, compared to Windows-only PostgreSQL Maestro and EMS PostgreSQL manager. phpPgaAmin does not looks promising. EMS PostgreSQL manager can work under Wine, but such setup have a number of issues. Requirements are: Table data editing and browsing for large tables (1M+), able to jump by FK or some master-slave editing, GUI filtering and so on. ER diagrams with in-place schema editing Schema editing and browsing with all useful GUI support Schema changes log to put into DB versioning (migrations script). Tabbed interface to be able to work with a number of tables and SQL queries at once. And so on. Any ideas?

  Read the article

• Both servers running keepalived become master

  - by pcent

  After a network failure,both servers running keepalived become master. When the network is reestablished, both keep the MASTER state. What could be causing it? Edited: Another information that might be relevant, each server has two NICs. Here is the virtual instance configuration: vrrp_instance VGAPP { interface eth0 virtual_router_id 61 state BACKUP nopreempt priority 50 advert_int 3 virtual_ipaddress { 10.26.57.61/24 } track_interface { eth0 } track_script { jboss_check #tomcat_check #interface_check #interface_check02 } notify_master "/opt/keepalived/scripts/set_state.sh MASTER" notify_backup "/opt/keepalived/scripts/set_state.sh BACKUP" notify_fault "/opt/keepalived/scripts/set_state.sh FAULT" notify_stop "/opt/keepalived/scripts/set_state.sh STOPPED"}

  Read the article

• How can I login to Ubuntu using a USB serial port?

  - by marc

  How can enable remote terminal login into Ubuntu 9.10 using a USB serial port? I created device /dev/ttyUSB0 and i want to allow logins using Hyper-Terminal. I found some resources but they are related to real hardware rs232 ports. I can't find any information about USB converter. So far I have established connection between that USB-serial port and my laptop. I can send text to the port (cp sometext.txt /dev/ttyUSB0) and read it using hyperterminal. What do I need to do to enable logins on this port?

  Read the article

• How to capture footage from an analog TV?

  - by hope

  I have only an old analog TV with just RCA connectors and a coaxial/cable in/out wire. It uses no HDMI interface, etc. I would like to know the cheapest method possible where the current video footage can be transferred and made into a target digital video file format and be copyable/transferrable via USB. Are there any devices that can do this with an analog TV? Basically, how can I get something along these lines done and for cheap?P I do NOT want to stream; I want footage recorded off the TV and stored via a digital encoding of a video file.

  Read the article

• Upgrade AirPort on Macs to support Snow Leopard's Wake on Wireless/WLAN?

  - by wojo

  Snow Leopard now supports Wake on WLAN, but not all hardware supports this. For example, my Octo Mac Pro from early 2008 has an AirPort card, but it does not support this. Nor does my 2007 2.33GHz MacBook Pro. For reference to what is needed, look at http://www.macrumors.com/2009/08/28/a-closer-look-at-snow-leopards-wake-on-demand-feature/ which includes a screenshot of what the System Profiler should show. It's pretty hard to find Apple parts, but is it possible to put newer cards into these machines to have them support Wake on Wireless?

  Read the article

• How can I tell a fresh ubuntu 9.0.4 install to boot from an external Mac OS X usb drive?

  - by Richard Dyce

  I have a reformatted Mac mini containing only a fresh install of Ubuntu 9.0.4. The Apple boot loader as been removed, so I can't hold down option, or the c key to get it to reboot form the install DVD. I do have an external drive (with both a usb and firewire interface available) with a bootable cloned OS X system on it. What steps do I need to go through to in order get grub to see the external drive, and to boot from it so that I can reformat the internal disk as an OS X drive?

  Read the article

• Is there a quick way to remove browser decorations

  - by Dane

  I'm finding that more and more applications use browsers as their user interface and I am caught in a dilemma. When browsing I want a browser window to have browser buttons, navigation icons, etc. When I'm using the browser for an application like twitter or yammer then I don't need those and having them just reduces the application area. I would rather save the vertical space and have a very sparse undecorated window. The problem is it does not seem easy to do this. My initial thought was to just install two different browsers. For example use Firefox with all the toolbars and then set IE to show no toolbars. I think this is ok but I would like a cleaner solution. Maybe a plugin in Firefox that turns everything off easily or something.

  Read the article

• Can a faulty DNS record prevent networking?

  - by Bob

  My server's network interfaces are not available anymore since yesterday evening. I didn't change anything, but I added a new DNS-record shortly before. Unfortunately, the web interface I used to add this DNS record escaped some characters, so I've got a faulty DNS record: example.com 86400 IN TXT "\"v=spf1 mx a -all\"" However, this is the only unusual thing I could notice about this. Is it possible that the \-characters in my DNS record are confusing for some routers? Or could it be the system itself which is confused by this (it's a Debian Lenny system). Unfortunately, I can't quick-test it because of the long TTL of the record.

  Read the article

• Non-Apple RAID card for Mac PRO (TOWER)

  - by Arthor

  I have the following: MAC PRO (Model Number: A1186) (PCIe - SLOTS) At present I am using the software RAID however I wish to move to the hardware raid because of the following: Performance (4 x 300gb SATA II in RAID 5) Redundancy (Raid 5, 1 drive can fail and system will be online) I do not wish to use the Apple RAID card (very expensive), I would like to use an aftermarket one which is cheaper. Questions: Does anyone have a WORKING aftermarket RAID card working in their MAC PRO (TOWER)? -(Have done some research, ROCKETRAID, need confirmation) If so to the above, does it work from boot? Thanks

  Read the article

• What are the best options for a root filesystem hosted on SSD under Linux

  - by stsquad

  I'm working on an embedded system which is going to be booting and hosting it's rootfs on an SSD disk. We are currently looking at using Intel X-18M SSDs. The file system structure will have a fairly static /usr section (modulo software upgrades) and an active /var and /var/log for maintaining state and logging. Given the wear-levelling done by the underlying flash does having separate partitions help or hinder? As modern SSDs appear as straight block devices and hide their mapping magic behind their firmware is there any point trying to optimise the choice of file-system that sits on-top of the SSD? Finally does enable SMART monitoring make any sense in this context or are their SSD specific ways of determining the underlying health of the storage hardware?

  Read the article

< Previous Page | 450 451 452 453 454 455 456 457 458 459 460 461  | Next Page >