Search Results

Search found 29203 results on 1169 pages for 'state machine workflow'.

Page 451/1169 | < Previous Page | 447 448 449 450 451 452 453 454 455 456 457 458  | Next Page >

• Cookieless domain alternative

  - by user63220

  I have only one folder that would benefit from a cookieless state, therefore setting up a whole subdomain for that seems a bit overkill for now, so I was wondering if deleting the cookie using mod_header in that specific folder would be enough or if it truly requires a different subdomain/domain ? For example, a .htaccess containing this in the /js subfolder of a webapp ? Header unset Set-Cookie

  Read the article

• Would it be possible to swap system restore points on different brands of computers?

  - by P'sao

  So I have a ThinkPad computer that I've installed a program called "Deep Freeze" which restores your computer to the "Frozen" state. I also have a Toshiba computer with no Deep Freeze on it. My question is that would it be possible to creat a system restore point on my Toshiba and then replace the system volume information folder with the one on the ThinkPad so I could restore to a point with no Deep Freeze? Would this work?

  Read the article

• VMWare Lab Manager: What's the difference between Capture to Library and Archive to Library?

  - by mcohen75

  On a configuration in my workspace I have two options, Capture to Library and Archive to Library. What's the difference between the two? The Lab Manager User's Guide isn't very useful here: Archive a Workspace Configuration to the Library You can preserve the exact state of a configuration in the configuration library. Archived configurations are read-only, but you can clone, export, and delete them. Sounds like what Capture to Workspace does.

  Read the article

• Sendmail yields "user unkown" errors even after (wrongly) setting up a catch-all account

  - by user59240

  I was trying to follow the instructions found here to set up a catch-all account, but still I get the following message for mails sent to non-existent users: The error that the other server returned was: 550 550 5.1.1 [email protected]... User unknown (state 14). Everything else works, though... /etc/mail/local-host-names and /etc/mail/virtusertable were set up as instructed. Any advice? Thanks!

  Read the article

• Euro character messed up during FTP transfer

  - by djechelon

  My customer is using a very outdated ecommerce management system on my hosting service. For that product, no support is being provided anymore by the vendor. Brief explanation: the shop website, that claims to run under LAMP stack, is built by an old Visual Basic Windows application running on MS Access. The user constructs the shop, defines the HTML template, adds products and categories, etc. Then the VB exe builds the PHP pages (one for each template page) and the SQL script to run on MySQL. It also uploads everything via FTP and runs the installation/upgrade script on its own. The problem Browsing the website, many products' descriptions are cut before the euro sign. For example, what was supposed to be "Product price €1000" becomes "Product price" The analysis MySQL contains a cutted description until the € sign, so it's not PHP fault The Access databases contain full description with € sign, so it's not fault of the webmaster writing bad description or eDisplay cutting them The SQL that will run once the site gets uploaded, stored on my local machine before upload, contains the € sign The same script, after being FTPed by eDisplay and opened with nano from SSH, shows the € sign messed up like this: ^À vsftpd log reports (obfuscated for privacy) Sat Dec 15 11:16:57 2012 22 xxx.xxx.128.13 1112727 /srv/www/domains/xxxxxx.it/htdocs/db.sql b _ i r xxxxxxx ftp 0 * c which seems to be a binary transfer (and also a huge security vulnerability because you can download the whole database from unauthenticated HTTP) The eDisplay internal FTP client provides no option for ascii/binary transfer modes [Add] Trying to manually upload the SQL file via SFTP shows messing up euro [Add2] Trying to manually upload using Xftp client with explicit ASCII mode doesn't fix too It looks like the file gets uploaded as binary. Perhaps on the customer's previous host it all worked fine because that was a Windows host. The server It's an Azure virtual machine running openSUSE 12.2 with both vsftpd and openSSH The question Without asking the customer to manually upload files using FileZilla or replacing € with &euro;, because he refuses, what can I do on server side to prevent vsftpd to screw up euro sign?

  Read the article

• What is the risk of introducing non standard image machines to a corporate environment

  - by Troy Hunt

  I’m after some feedback from those in the managed desktop or network security space on the risks of introducing machines that are not built on a standard desktop image into a large corporate environment. This particular context relates to the standard corporate image (32 bit Win XP) in a large multi-national not being suitable for a particular segment of users. In short, I’m looking at what hurdles we might come across by proposing the introduction of machines which are built and maintained by a handful of software developers and not based on the corporate desktop image (proposing 64 bit Win 7). I suspect the barriers are primarily around virus definition updates, the rollout of service packs and patches and the compatibility of existing applications with the newer OS. In terms of viruses and software updates, if machines were using common virus protection software with automated updates and using Windows Update for service packs and patches, is there still a viable risk to the corporate environment? For that matter, are large corporate environments normally vulnerable to the introduction of a machine not based on a standard image? I’m trying to get my head around how real the risk of infection and other adverse events are from machines being plugged into the network. There are multiple scenarios outside of just the example above where this might happen (i.e. a vendor plugging in a machine for internet access during a presentation). Would a large corporate network normally be sufficiently hardened against such innocuous activity? I appreciate the theory as to why policies such as standard desktop images exist, I’m just interested in the actual, practical risk and how much a network should be protected by means other than what is managed on individual PCs.

  Read the article

• Stopping an unstoppable service

  - by Nicholas

  I have antivirus service (Kaspersky) that occasionally becomes unresponsive to the normal stop/stop gui interface provided by said vendor. I would like to find a way to kill the service for a restart without rebooting, however all attempts I have tried result in failure with an 'Access is Denied' error. These include: Services Control Panel (grayed out stop button) Task Manager Killing Process Explorer Killing command line net and sc stopping runas with domain admin using net stop Some details include: Machine: Windows Vista Service Type: 10 WIN32_OWN_PROCESS Service State: 4 Running (NOT_STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)

  Read the article

• Bizarre client IP switch-up on VPN

  - by B. VB.

  Let A.B.C.D be the public IP of my VPN server. Let W.X.Y.Z be the IP of the client before it connects to the VPN. My VPN server's IP address on the LAN in 10.8.0.1, and the client is 10.8.0.6. I also run a webserver on the same machine hosting the VPN. On it is a simple webpage that performs the exact same thing as whatismyip.org (i.e., simply prints the IP of the requester) Let me illustrate the scenario for you. In a Chrome window I have three tabs, what I have in parenthesis is the URL: Tab 1 (http://whatismyip.org): A.B.C.D This is what I expect to see. It's the public IP of the VPN server. Tab 2 (http://10.8.0.1): 10.8.0.6 ok, looks expected. They are behind the same LAN now. Tab 3 (http://A.B.C.D) W.X.Y.Z WTF?? Basically, if I access the webserver while tunneled, in shows the IP address of my machine PRIOR to tunelling! Remember, tab2 and tab3 are the same webpage. Why does Tab3 not show the client IP as it's own IP (i.e., show A.B.C.D)??? I hope this question is clear, thanks in advance!

  Read the article

• Hibernate & Sleep broken after IE 9 RTM installation in Windows 7 x64.

  - by AKa

  I have a question about hibernation. I installed Internet Explorer 9 RTM x64 on my Windows 7 x64 SP1 desktop machine. After this, computer don't entry the hibernation or (hybrid) sleep state properly. After I hibernate the computer the monitor become blank screen and the keyboard and mouse are inactive. But the machine is still running and there isn't any possibility to switch them off as only with power button. But this is recognized on next start as ineligible because of log entry with message “The previous system shutdown at xx:xx:xx on ?xx.?xx.?x was unexpected“ and menu with safe mode option. I’m clearly not sure if it has something to do with Internet Explorer installation, but I’m definitely guaranteed that before of this I never had some problems with hibernation or (hybrid) sleep. In Windows logs isn’t something suspect. I switched the hibernation off and on, installed new drivers for mainboard, graphic and network card, checked the hard disk, nothing was helpful. This is really sad, beacuse I don't like to switch the computer completely off because it takes longer to boot. Any suggestions?

  Read the article

• File corruption (bad checksums) in large files copied to VMware guest

  - by AllanA

  In setting up a development lab, I've got a desktop system running ESXi 4.1.0 (free license) on SATA RAID 0 (already purchased and configured when I started this job; I'm open to hardware input as it pertains to my problem.) Its guests so far include two Win2008 Server R2 64-bit VMs and on Ubuntu 10.04 64-bit VM. I'm installing onto the Windows servers. We've been copying off some fairly large files (over a gigabyte) for an installation, hoping to install more quickly from a (virtual) hard drive than from the network for from BD-ROM. The problem is that they keep coming up with different checksums from the originals. The file sizes are the same, but md5sum reports different numbers (and so does the installer, as it refuses to continue when the checksums don't match.) I've tried copying directly from the BD-ROM (attaching the OS drive to the host system's physical drive). I've tried copying the large files onto a co-worker's Windows machine from his Blu-Ray drive; when I do that, the checksums match. But when I copy from his machine to the VM guest over a network share, the checksums no longer match. Thinking this meant a corrupt destination drive, I deleted it in vSphere and added another freshly created drive. The problem persists. I'm not sure what to try next.

  Read the article

• Fans still running after shutdown after upgrade to Windows 8

  - by docaholic

  I'm running into a really annoying issue after upgrading from Windows 7 to Windows 8. I first noticed it during the initial (clean) install; when the installer tried to reboot, my machine (an acer aspire 4755G) just hung after the initial shutdown. That is, after the screen turns off, the power lights and fans are still running, and the machine itself doesn't restart. (I let it sit for a good 15 minutes, and it still didn't change) I managed to do a hard reset (power button for 5 seconds) and the install finished, but every shutdown/restart has been like that. Interestingly enough, hibernate works just fine. I've looked at other solutions where it said to use the bcdedit /set disabledynamictick yes and that didn't work. I also turned off the "Fast Boot" option in the power settings menu. That didn't work either. So far, the only option is to do the hard shut down by holding down the power button, but that proves to be horribly inconvenient. Any ideas on what's going on here?

  Read the article

• Where does Firefox store the opened windows/tabs/urls for Session Restore after a crash?

  - by jens

  In which location and file does Firefox save the last windows I had opened (when Firefox crashed)? I have a complete "hot dump" copy of a file system and need to restore the state Firefox was when the system crashed, but I cannot restore the full backup itself. I can only extract the files of Firefox, but I do not know in which files I have to search for the urls that were last opened when the snapshot of the whole file system was done.

  Read the article

• ubuntu server can`t install any package on internet

  - by user963587

  I have a Ubuntu-server. I am trying to install Vsftpd but it shows the : Reading package lists... Done Building dependency tree Reading state information... Done E: Couldn't find package vsftpd After that I checked internet connection by ping 4.2.2.4 and there was no problem in internet connection. I tried to apt-get update but it was not possible it shows: Err http://us.archive.ubuntu.com lucid Release.gpg Temporary failure resolving 'us.archive.ubuntu.com'

  Read the article

• Unable to mount iso as dvd drive in VMware Fusion 6

  - by John O

  I have a newer iMac without an optical drive and some DVDs that I needed to run software off of. This software will have you juggle discs to read data off of them, and the data can't simply be copied to the machine's drive. I used a windows machine to make ISOs of these DVDs. And the first disc, the installer, it will mount in VMware and let you install the software. It then asks for the other discs, and these won't mount as ISOs. If I mount them as drive images, they'll show up on the iMac's and I have access to all the files. But if I try to mount them as the dvd drive through Fusion, nothing happens. For that matter, I'm unable to attempt it a second time, as Fusion believes that the there is already an iso mounted as the dvd, while nothing has happened as far as the guest OS is concerned. drutil eject will allow me to eject the ghost/non-existent dvd, at which point I can make a second (equally futile) attempt. Does anyone have an explanation for this behavior? How can the ISO be valid enough to mount as a drive image, but not valid enough for Fusion to mount it as if it were a dvd?

  Read the article

• HSphere - Only sees Apache 2 Test Page after forced shutdown?

  - by Darkwoof

  Hi, I have a dedicated server running on a Dell PowerEdge 850 with CentOS 4.4 and HSphere 3.0 Patch 6 colocated at a datacenter. Last night my hosting company had to schedule a change in the power bar, and I gave the go ahead for them to shut down the server and bring it up when they are done. Since they do not have admin access to the machine, I suppose they did a forced shutdown. When the machine was brought up, I found that all my domains (and sub-domains) are now pointing to an "Apache 2 Test Page" instead of the pre-configured sites that were running prior to the shutdown. This apparently only affects the standard sites running on port 80 - my Webmin instance running at port 1000 is still accessible for example, as well as my HSphere control panel running at port 8080. I've checked the config settings using the HSphere UI for each of the sites, and didn't find anything wrong. I've also tried rebooting the server via SSH, which does not rectify the problem. I've previously done reboots with no issues; the sites would just come right back up when its done, but not this time. I'm guessing some configuration file got corrupted or overwritten this time? Anyone with experience with HSphere and can provide some advice on what's happened and how to solve it? Thanks. (I do not have an active support agreeement for HSphere since Parallels took over and increased the min. license to 200. I only had 25 license for use by family and friends.) Thanks in advance.

  Read the article

• IIS 7: One Page Works, All Others Fail With "Error code: ssl_error_rx_record_too_long"

  - by Michael

  On my local machine, I have a second site bound to Port 81. Within that site is a certain page which I can browse from other machines with no problems, but all other pages fail with "Error code: ssl_error_rx_record_too_long". Each of the failing pages (as well as the lone working page), works with localhost. So, from any machine, local or remote: http://cmwmach01.mydomain.biz:81/RD/SS/SS.aspx (works) http://cmwmach01:81/RD/SS/SS.aspx (works) http://cmwmach01.mydomain.biz:81/RD/POV/SC.aspx (fails - gets changed to https) http://cmwmach01:81/RD/POV/SC.aspx (fails - gets changed to https) Everything works with localhost (locally, of course). I've tagged this question with SSL because, at one point, it would warn about an SSL cert issue (maybe this was self-signed at one point?), but now it doesn't. While there may be an issue around that, I don't see how this could cause the issue I am seeing (but, as I mention below, am I way out of my depth here). I am way out of depth here in trying to figure out why that one page works (or the others don't), so that I can make them all work. Any ideas?

  Read the article

• Is there any way to shut up my ATI HD 5770?

  - by slpsys

  So to preface, I basically built Jeff's machine; I already had some of the components, including (scarily enough) the exact same case1. I've been buying bits and pieces over the past few months, which coincided perfectly with his recent post about three monitors, though not being a gamer outright, I opted for the second-from-the-bottom option. After finally plopping all the pieces lovingly into the case this evening, I turn it on...and it sounds like four professional grade hair-driers. Some quick regression analysis determined that with the video card out, the running machine sounded no louder than our house's vents. Basically, my last desktop build included a $45-at-the-time graphics card, and it's been Macbook Pros and workstations since then, so I have zero idea whether I'll just be able to tune the fan speed later on. Will I be able to get this thing to quiet down every time I'm not playing Modern Warfare 2 at maximum framerate, or should I just send this thing back now, and get the quietest card in my pricerange? 1 One thing of note is that I do not have noise-absorbing foam in the case, as is pictured in the article. I'm only mentioning that because I suspect it could drop the overall output a few decibels, but obviously not that many.

  Read the article

• 3-4 old computers = general purpose cluster?

  - by TheLQ

  I have 3 old computers lying around right now running a P2 at 800 MHz(?), Intel Mobile 1.6 GHz, AMD Athlon XP 2000+ at 1.66 GHz, and (might not use this) P4 at 2.7 GHz, all with 512 MB Ram, and am considering clustering them together for fun/knowledge. They would be running an undecided version of linux, preferably ubuntu based. The issue is what I want to use it for: general computing and occasional video encoding. By general computing I mean day to day tasks. However I'm not sure if every program started by a single X session is going to exist on the same machine, defeating the purpose of such a system. Will programs be split up or exist on one machine? Second, assuming this is running 100baseT ethernet (not sure if the PCI slot itself could handle Gigabit), would the speed of having a program exist over the network be an issue? It seems that the constant asking of various things in RAM would be quite slow. And before you say "buy another computer!", that's not the point of this question. I'm asking would it be usable, not necessarily practical. And yes I know, this is going to be extreamly power consuming.

  Read the article

• Application Screen Repainting Issues

  - by Jeff Sheldon

  I have this issue lately at work. It drives be nuts, and I finally stopped to ask this question. It's quite often that an application I've been running just randomly fails to repaint itself for a while, usually in the editor screen. I most often see this occurring with Expression Web, Visual Studio 2008/2010 and SQL Server Management studio. These applications are what I work in the most, so I'm not surprised to mostly see it here. But I was curious if anyone else had a solution for this. I've tried: Reboots. The screen shot below is about 10 minutes after a reboot. New Video Drivers. This machine is running a Nvidia Quadro NVS 290 video card with the latest drivers. Closing other applications, this is the only thing running right now. As far as hardware, this machine has Dual Quad-Core Xeon 2.83ghz Processors, with 10 gigs of memory, running Windows XP SP3 64bit. Any help would be great. JNK EDIT: Per comments from deleted (wrong) answer: I'm running dual monitors. Set it to single display, still occurred. Rebooted, and tried it again, and it still occurred. Switched it back to dual screen. My resolution is only 1400x900 on each.

  Read the article

• Is there a performance difference between Windows 7 on SSD installed from scratch versus it using a recent ghost/clone drive image from a harddisk?

  - by therobyouknow

  I'm planning to upgrade a notebook PC to a Solid-State Flash Drive (SSD) soon. I want to use the notebook before that and am considering installing Windows 7 on the hard disk (spinning variety, 5400rpm) before I get the SSD. To save time I am wondering if I can ghost/clone the installation of Windows 7 from the hard drive and put on the SSD. Would the performance of this clone from the harddisk onto the SSD be different from starting again and reinstalling Windows 7 from scratch on the SSD? (Windows 7 32bit professional)

  Read the article

• Constant crashes in windows 7 64bit when playing games

  - by yx.

  I've tried everything I can possibly think of in trying to fix this problem and I'm totally out of ideas, so any help would be appreciated: The problem: whenever I fire up a game, it works for a short while with no problems and then it would crash. Either its a hard crash, forcing me to reboot, or windows would report that the display driver has stopped working and recovered. Here is a list of things I've already tried: Drivers - tried the latest drivers (catalyst 9.12) as well as the stock drivers that came with the video card. Also have the latest BIOS/chipset Memtest - Ran Memtest86+ overnight, had no problems, the windows diagnostic tool also does not find any problems. Overheating - Video card/cpu temperatures are well below peak (42 and 31 Celsius receptively) PSU Voltage - CPUID shows that the voltage levels are all above what they should be. The PSU itself is only roughly 16 months old and is a good model. HDD - No errors when checked GPU - Brand new (replaced previous card since I thought it was the problem, apparently not) Overclocking - Everything is at stock levels, memory voltage is set to manufacturer's standard Specs: Motherboard: ASUS P5Q Pro CPU: Core 2 Duo E8400 3.0 ghz OS: Windows 7 home premium 64 bit Memory: Mushkin Enhanced 4GB DDR2 GPU: Sapphire HD 5850 1GB PSU: SeaSonic M12 600W ATX12V DirectX: DX11 Event Viewer after a crash always has these logged: A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 1 The details view of this entry contains further information. A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 0 The details view of this entry contains further information. A previous card that I had (4850x2) also had these errors, so I changed video cards, but the same thing is happening.

  Read the article

• How do you permanently disable the 'This Connection is Untrusted' page on Firefox

  - by TheIronChef9

  I'm going insane. Can someone please help me to COMPLETELY DISABLE the 'This Connection is Untrusted' page on Firefox. Facts: I am running Firefox 23.0 on an Ubuntu machine (downloaded and installed ubuntu today) It is a work computer and I have to use my employer's proxy While visiting Webpages/webapps like Gmail or Google brings up the 'This Connection is Untrusted' page and I have to go through the whole tedious task of selecting 'I understand the Risks' and add Exceptions, etc. etc. The fact is, I don't care about the risks. I would rather this computer melt into the ground than have to see that page ever again. I want to dance naked in untrusted pages and not give a damn about the consequences. I just never want to see that page again. Ever. For some sites (eg. wikipedia), the css doesn't load and I end up seeing them in plain text. As a result these sites are completely useless. Wasted hours trying to solve this for stackoverflow.com. These issues happen on the Firefox on my Windows XP machine as well (also using the same proxy). I don't want to export/import certificates or create exceptions for every site that shows this bloody page. I just want this page gone. I don't want Firefox to tell me what's safe and what's not. Also, my system time and date are correct. I've also tried the lies on this page too with no good results. Edit: I've also tried the whole going into the Advance-Certificates-validation setup page and unchecked 'Use the Online Certificate Status Protocol (OCSP) to confirm the current validity of certificates' checkbox. Nothing happened even after restarting firefox or rebooting. I need help. Thanks.

  Read the article

• Should I be able to Windows Phone 8 emulator running with this AMD config

  - by pete

  I have just bought a new system as follows * AMD A4-5300 Trinity 3.4GHz * Gigabyte GA-F2A55M-DS2 Motherboard I checked and the A4-5300 supports Virtualisation. I have run the SLAT checking tool and it says that my machine supports SLAT. Been into the BIOS and ensures that SVN is enabled. I have also run the coreinfo tool that indicates that SVN is not valid fort the machine nor is NPT.. not sure why this conflicts with the true BIOS setting (I checked with GIGABYTE and seems that NPT and NX are not options that can be set in the BIOS) But.. when I run the emulator I it hangs - I can see some activity in Hyper-V manager, but it doesnt get very far and no meaningfull error messages. Been working the plethora of suggestions to get around this, but so far, nothing has worked. My question is should this setup allow the WP8 emulator to run. I am positive the CPU supports virtualisation, but are there issues with the motherboard here? I have spent a huge amount of time on this so far....am I wasting my time with the current configuration, or should it work? thanks

  Read the article

• Redhat Linux password fail on ssh

  - by Stephopolis

  I am trying to ssh into my linux machine from my mac. If I am physically at the machine I can log in with my password just fine, but if I am sshing it refuses. I am getting: Permission denies (publickey,keyboard-interactive) I thought that it might be caused by some changes that I recently made to system-auth, but I restored everything to what I believe was the original format: #%PAM-1.0 # This file is auto-generated. # User changes will be destroyed the next time authconfig is run. auth required pam_env.so auth sufficient pam_fprintd.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth required pam_deny.so account required pam_unix.so account sufficient pam_localuser.so account sufficient pam_succeed_if.so uid < 500 quiet account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok password required pam_deny.so session optional pam_keyinit.so revoke session required pam_limits.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so But I still could not ssh in. I tried removing my password all together and that didn't seem to help either. It still asks and even entering an empty string (nothing) it still fails me out. Any advice?

  Read the article

• How does KMS (Windows Server 2008 R2) differentiate clients?

  - by Joe Taylor

  I have recently installed a KMS Server in our domain and deployed 75 new Windows 7 machines using an image I made using Acronis True Image. There are 2 variations of this image rolled out currently. When I go to activate the machines it returns that the KMS count is not sufficient. On the server with a slmgr /dlv it shows: Key Management Service is enabled on this machine. Current count: 2 Listening on Port: 1688 DNS publishing enabled KMS Priority: Normal KMS cumulative requests received from clients: 366 Failed requests received: 2 Requests with License status unlicensed: 0 Requests with License status licensed: 0 Requests with License status Initial Grace period: 1 Requests with License statusLicense expired or hardware out of tolerance: 0 Requests with License status Non genuine grace period: 0 Requests with License status Notification: 363 Is it to do with the fact that I've used the same image for all the PC's? If so how do I get round this. Would changing the SID help? OK knowing I've been thick whats the best way to rectify the situation. Can I sysprep the machines to OOBE on each individual machine? Or would NewSID work?

  Read the article

< Previous Page | 447 448 449 450 451 452 453 454 455 456 457 458  | Next Page >