Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 456/757 | < Previous Page | 452 453 454 455 456 457 458 459 460 461 462 463  | Next Page >

  • What happens when the USB key or SD card I've installed VMware ESXi on fails?

    - by ewwhite
    An SD (SDHC) card installed in an HP ProLiant DL380p Gen8 server running VMware ESXi just failed. I encountered some rather ominous looking messages on the vCenter console and in the HP ProLiant ILO event log... Lost connectivity to the device ... backing the boot filesystem. As a result, host configuration changes will not be saved to persistent storage. Embedded Flash/SD-CARD: Error writing media 0, physical block 848880: Stack Exception. VMware advocates the use of USB and SD (SDHC) boot devices for ESXi. It was one of the main reasons the smaller footprint ESXi was developed (versus the older ESX). I've spent much time highlighting the differences between ESXi's installable and embedded modes to coworkers and clients. However, these failures do seem to happen. In this case, this is my third instance. Luckily, this is a vSphere cluster with SAN storage. What steps should be taken to remediate this failure?

    Read the article

  • Can't create VM with virt-install on Debian wheezy

    - by chrismacp
    Cant find any answers anywhere so here goes. I am trying to CREATE a new virtual machine using the virt-install command from a console on a Debian wheezy install. I keep getting the following output: Starting install... ERROR internal error process exited while connecting to monitor: char device redirected to /dev/pts/1 inet_listen_opts: bind(ipv4,127.0.0.1,5951): Cannot assign requested address inet_listen_opts: FAILED I assumed that the port (5951 in this case) was being used judging by the error message and other sites I visited for an answer, but the same error occurs whatever number I use for the port. I cant see that port being listened upon in netstat either. Anyone have any ideas what may be wrong?

    Read the article

  • SQL Server 2000 tables

    - by user40766
    We currently have an SQL Server 2000 database with one table containing data for multiple users. The data is keyed by memberid which is an integer field. The table has a clustered index on memberid. The table is now about 200 million rows. Indexing and maintenance are becoming issues. We are debating splitting the table into one table per user model. This would imply that we would end up with a very large number of tables potentially upto the 2,147,483,647, considering just positive values. My questions: Does anyone have any experience with a SQL Server (2000/2005) installation with millions of tables? What are the implications of this architecture with regards to maintenance and access using Query Analyzer, Enterprise Manager etc. What are the implications to having such a large number of indexes in a database instance. All comments are appreciated. Thanks

    Read the article

  • Route additional network through Sonicwall site-to-site VPN

    - by Brandon
    I have a sonicwall site to site vpn. At one of the sites there is another Cisco vpn to another site. I need to route the traffic for the cisco vpn through the site to site from the other sonicwall site. Site A - 10.10.0.0 /16 network Site B - 192.168.1.0 /24 Sonicwall, A cisco vpn is on 192.168.1.226 address and has routes the 10.10.0.0 network to Site A. Site C - 192.168.2.0 /24 Sonicwall Site A-B VPN is working Site B-C VPN is working I need to get Site C to transmit the 10.10.0.0 traffic over the VPN to site B and then out the Cisco device.

    Read the article

  • OpenVPN DNS: VPN DNS stomping local VPN

    - by Eddie Parker
    I've finally noodled with OpenVPN enough to get it working. Even better, I can mount samba drives, ping network machines through the TUN device, etc - it's all great. However, I'm noticing that if I use the following directive, then some of the machines that are normally visible by the client, on the client's side (i.e., not through the VPN) get masked with some other server out on the Internet. push "dhcp-option DNS 10.0.1.1" # Push our local DNS to clients Is there any way to avoid this, besides hacking the 'hosts' file on the client machine? Ideally I'd like to only use my VPN's DNS for machines within that domain.

    Read the article

  • How to permanently add wireless interfaces with iw

    - by walli
    How can I permanently add virtual wireless interfaces to my network configuration with iw? I created the following interfaces: iw phy phy0 interface add vwlan0 type station iw phy phy0 interface add vwlan1 type __ap The first is configured as a wifi client connecting to an existing network (wpa_supplicant) The second is configured as wireless hotspot (hostapd + dnsmasq) The setup works, but now I can't quite figure out what the best strategy is to save this configuration permanently. Have made an init script for wpa_supplicant Have made an init script for the hotspot Virtual adaptor network settings set in /etc/network/interfaces But all this depends on the wireless interfaces being created. What would be the best way to make sure these interfaces are created before the network is set up and the services are run? As a bonus, since this wireless interface is a usb device, would it be possible to have the interfaces created (and the services started) when the interface is hotplugged? I know you can execute code after a network interface is up, but the wlan0 interface that is hotplugged should never be up. Operating system is raspbian

    Read the article

  • Linux partitioning problem

    - by Claudiu
    I am using cfdisk to repartition my hdd as from OS install I only got 1 big partition a swap. I wanted to resize the big partition to 1 GB /boot and use the rest of the space for an extended partition. After I do cfdisk, I recheck the partitions with fdisk -l and I get these: Disk /dev/sda: 320 GB, 320070320640 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda3 1 38455 308881755 f Extended LBA Warning: Partition 3 does not end on cylinder boundary. /dev/sda2 38455 38698 1951897 82 Linux swap /dev/sda1 * 38699 38913 311349654 83 Linux My problem is the Warning message, I think I know the cause, I think its because of sda1 Blocks size. How could that be soo big if Start and End interval is small?

    Read the article

  • Unix list absolute file name

    - by Matthew Adams
    Given an arbitrary single argument representing a file (or directory, device, etc), how do I get the absolute path of the argument? I've seen many answers to this question involving find/ls/stat/readlink and $PWD, but none that suits my need. It looks like the closest answer is ksh's "whence" command, but I need it to work in sh/bash. Assume a file, foo.txt, is located in my home directory, /Users/matthew/foo.txt. I need the following behavior, despite what my current working directory is (I'm calling the command "abs"): (PWD is ~) $ abs foo.txt /Users/matthew/foo.txt $ abs ~/foo.txt /Users/matthew/foo.txt $ abs ./foo.txt /Users/matthew/foo.txt $ abs /Users/matthew/foo.txt /Users/matthew/foo.txt What would "abs" really be? TIA, Matthew

    Read the article

  • ECMP Load Balancing in JUNOS

    - by SpacemanSpiff
    I'm trying to figure out how to use ECMP load balancing in JUNOS. I know this isn't the best way to load balance, but its quick and dirty and gets done what I need to. In ScreenOS this was pretty easy. Device: SRX220 JunOS: 10.3R2.11 Here's what I've got so far: routing-options { static { route 0.0.0.0/0 { next-hop [ 1.1.1.1 1.1.1.2 ]; metric 10; } } maximum-paths 2; Will that do it? Tom

    Read the article

  • network design to segregate public and staff

    - by barb
    My current setup has: a pfsense firewall with 4 NICs and potential for a 5th 1 48 port 3com switch, 1 24 port HP switch, willing to purchase more subnet 1) edge (Windows Server 2003 for vpn through routing and remote access) and subnet 2) LAN with one WS2003 domain controller/dns/wins etc., one WS2008 file server, one WS2003 running Vipre anti-virus and Time Limit Manager which controls client computer use, and about 50 pcs I am looking for a network design for separating clients and staff. I could do two totally isolated subnets, but I'm wondering if there is anything in between so that staff and clients could share some resources such as printers and anti-virus servers, staff could access client resources, but not vice versa. I guess what I'm asking is can you configure subnets and/or vlans like this: 1)edge for vpn 2)services available to all other internal networks 3)staff which can access services and clients 4)clients which can access services but not staff By access/non-access, I mean stronger separation than domain usernames and passwords.

    Read the article

  • Unable to browse Server 2008R2 from XP clinets

    - by Dave M
    We have just deployed a Windows 2008R2 server in our Windows 2003 domain. XP clinets are unable to browse in "entire network" and find the new server. It can be accessed by entering \\servername and it can be pinged by name and IP address. Users access shares without issue. Netbios over TCP/IP is enabled. Computer browser is running on the Windows 2008R2 system. Turn on Network Discovery is enabled. These services were started as a result of an MS article Computer Browser DNS Client Function Discovery Resource Publication SSDP Discovery UPnP Device Hosts

    Read the article

  • Migrating from DD-WRT to Tomato

    - by Collin Allen
    Is it possible to switch to the latest version of Tomato on a router that's already running DD-WRT? Using the default Linksys firmware on my WRT54GL v1.1, I had to upload a micro version of DD-WRT first. I imagine that, since I'm now running third-party firmware, I won't have to do that again to make the switch, but I thought I should check so as not to brick it. This router is taking a back seat to a new AirPort Extreme (for the 'n' capability), but I still want to have the soon-to-be-Tomato device sit between the AirPort Extreme and my modem for the superior traffic graphing.

    Read the article

  • Recover a lost IBM DS4300 SAN password?

    - by Daniel
    I have a pair of IBM DS4300 SAN units that I need to perform a firmware upgrade on. Unfortunately the admin passwords on these units have been lost and now need to be reset. I had hoped the default password of 'infiniti' would work but it seems that it must have been changed. I know the method here is to contact IBM but the cost of that phone call is ludicrous if someone out here knows what they're going to tell me to do. These units are out of warranty and the cost of support is beyond what we have the budget for. Is there an interrupt I can enter during the boot process (similar to a cisco password recovery) or is there a hardware/software tool I require? Please, if anyone has ever gone through the process of an IBM password recovery I’m asking for a little help. EDIT: Just to clarify, the password I need to reset is the one used for serial cable access and not for storage manager. Sorry if I have caused more confusion.

    Read the article

  • Windows with putty via USB serial cable to Linux serial port - output ok, input isn't

    - by Aharon Robbins
    I am trying to get two way serial communications going between a Windows XP system and a Linux system (RHEL 5). I have /sbin/agetty -L 9600 ttyS0 in /etc/inittab. I am using a generic USB to serial adaptor on Windows (Unitek) and a null modem cable. I have putty configured for 9600 baud, 8 bits, no parity, one stop bit, no flow control. I get the login prompt from agetty in the putty window but input does not work; I see weird characters in the putty screen. I can echo output into the device from windows and see it, but cat < /dev/ttyS0 just prints out weird characters from what I type. Any and all suggestions will be welcome. Thanks!

    Read the article

  • Setup Cisco RVS4000 QOS for VOIP

    - by andyknas
    Just switched from dedicated T1's with analog phone lines to cable modem with 10/2 uplink. We're having some VOIP call quality issues on the outgoing side when bandwidth is stressed and I need to setup QOS or a VLAN on our RVS4000 router. Currently all phone traffic (talkswitch device and ip phones) are on it's own d-link PoE switch, and all workstations are on a LinkSys 1GB switch. Both switches are plugged into ports on the RVS4000. I'd like to set it up so that the dlink port has ~512Mbsp dedicated to it for voice at all times. It's my understanding that with a VLAN or QOS I can set this up. I've got QOS setup already with port 5060 to have high priority but it doesn't seem to make a difference.

    Read the article

  • Wireless network not working Linux Mint

    - by zharvey
    I have a home LAN that I am confident is working properly (I have a Windows 7 and an Ubuntu Desktop machine that both see the router and a working Internet connection). I just installed Linux Mint (Maya) on a new machine and although I can connect to the Internet via a wired (ethernet) connection, it does not see my wireless network. In fact, as you can see in the screenshot below, it doesn't even look like it has the drivers to be able to detect a wireless network... I have ran update manager and made sure that I am up-to-date with everything and have restarted. Any ideas here?!?

    Read the article

  • How to block some disks from probes on Linux boot?

    - by Igor Velkov
    My linux host connected to SAN with FC interface. It connect with one path, and see some luns, that can't access, because they need anohter path, not available to host. On boot linux probe all lun he can see, get read error on unaccessible luns, and hangs there for a long-long time. Is there a way to disable any access to some luns at boot time, and later? I found a filters for device ignoration for LVM and MULTIPATH, but it not help during boot process. Generally, lvm still affected too despite of filter, and gives me a IO error on every operation like lvdisplay and vgdisplay, but this is another question.

    Read the article

  • Sony Vaio: Bluetooth problem

    - by Mehper C. Palavuzlar
    I have a Vaio VPCCW21FX with Windows 7 Home Premium. I'm trying to reach the bluetooth settings but to no avail. I could neither switch the bluetooth on nor find the settings for it. I have tried the following: In Start menu, typed bluetooth, found "Bluetooth" in Programs, clicked on it, but there was no response. Checked task manager, there's nothing related bluetooth. Headed for Control Panel, opened Add Devices or Printers, right-clicked on Vaio computer, clicked on Bluetooth Settings, and no response again. What's wrong with my laptop? How can I fix this?

    Read the article

  • Does an alternative to regedit.exe exist?

    - by Peter Mortensen
    Is there something better than regedit.exe for searching and editing the Windows registry? Update 1: Registrar Registry Manager 6.50 from Resplendence Software Projects, free lite edition meets the two requirements listed below. Direct download URL (2.7 MB). Search can also be restricted to a particular branch in the registry. However exporting and sorting on columns in the search window is disabled in the lite version (and there may be other limitations). I haven't yet evaluated the other candidates. In particular I would like to be able to batch search instead of having to step through with F3. And a go to function that will open a particular registry key, e.g. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer, instead of having to go through from the top, Platform: Windows XP.

    Read the article

  • Making Thunar the default file browser without hiding the desktop icons

    - by Manu
    I really dislike Ubuntu's default file browser, nautilus, and decided to opt for a lighter alternative (Thunar or Xfe). I've used the following script to change the default to Thunar, but now all my icons are gone from the desktop ! The files are still there, in /home/myid/Desktop, but they do not appear. Is there a way to show them, or is this a consequence of removing nautilus as the default file browser ? Can I modify the following script* in order to keep the icons ? *copied from https://help.ubuntu.com/...: ## Originally written by aysiu from the Ubuntu Forums ## This is GPL'ed code ## So improve it and re-release it ## Define portion to make Thunar the default if that appears to be the appropriate action makethunardefault() { ## I went with --no-install-recommends because ## I didn't want to bring in a whole lot of junk, ## and Jaunty installs recommended packages by default. echo -e "\nMaking sure Thunar is installed\n" sudo apt-get update && sudo apt-get install thunar --no-install-recommends ## Does it make sense to change to the directory? ## Or should all the individual commands just reference the full path? echo -e "\nChanging to application launcher directory\n" cd /usr/share/applications echo -e "\nMaking backup directory\n" ## Does it make sense to create an entire backup directory? ## Should each file just be backed up in place? sudo mkdir nonautilusplease echo -e "\nModifying folder handler launcher\n" sudo cp nautilus-folder-handler.desktop nonautilusplease/ ## Here I'm using two separate sed commands ## Is there a way to string them together to have one ## sed command make two replacements in a single file? sudo sed -i -n 's/nautilus --no-desktop/thunar/g' nautilus-folder-handler.desktop sudo sed -i -n 's/TryExec=nautilus/TryExec=thunar/g' nautilus-folder-handler.desktop echo -e "\nModifying browser launcher\n" sudo cp nautilus-browser.desktop nonautilusplease/ sudo sed -i -n 's/nautilus --no-desktop --browser/thunar/g' nautilus-browser.desktop sudo sed -i -n 's/TryExec=nautilus/TryExec=thunar/g' nautilus-browser.desktop echo -e "\nModifying computer icon launcher\n" sudo cp nautilus-computer.desktop nonautilusplease/ sudo sed -i -n 's/nautilus --no-desktop/thunar/g' nautilus-computer.desktop sudo sed -i -n 's/TryExec=nautilus/TryExec=thunar/g' nautilus-computer.desktop echo -e "\nModifying home icon launcher\n" sudo cp nautilus-home.desktop nonautilusplease/ sudo sed -i -n 's/nautilus --no-desktop/thunar/g' nautilus-home.desktop sudo sed -i -n 's/TryExec=nautilus/TryExec=thunar/g' nautilus-home.desktop echo -e "\nModifying general Nautilus launcher\n" sudo cp nautilus.desktop nonautilusplease/ sudo sed -i -n 's/Exec=nautilus/Exec=thunar/g' nautilus.desktop ## This last bit I'm not sure should be included ## See, the only thing that doesn't change to the ## new Thunar default is clicking the files on the desktop, ## because Nautilus is managing the desktop (so technically ## it's not launching a new process when you double-click ## an icon there). ## So this kills the desktop management of icons completely ## Making the desktop pretty useless... would it be better ## to keep Nautilus there instead of nothing? Or go so far ## as to have Xfce manage the desktop in Gnome? echo -e "\nChanging base Nautilus launcher\n" sudo dpkg-divert --divert /usr/bin/nautilus.old --rename /usr/bin/nautilus && sudo ln -s /usr/bin/thunar /usr/bin/nautilus echo -e "\nRemoving Nautilus as desktop manager\n" killall nautilus echo -e "\nThunar is now the default file manager. To return Nautilus to the default, run this script again.\n" } restorenautilusdefault() { echo -e "\nChanging to application launcher directory\n" cd /usr/share/applications echo -e "\nRestoring backup files\n" sudo cp nonautilusplease/nautilus-folder-handler.desktop . sudo cp nonautilusplease/nautilus-browser.desktop . sudo cp nonautilusplease/nautilus-computer.desktop . sudo cp nonautilusplease/nautilus-home.desktop . sudo cp nonautilusplease/nautilus.desktop . echo -e "\nRemoving backup folder\n" sudo rm -r nonautilusplease echo -e "\nRestoring Nautilus launcher\n" sudo rm /usr/bin/nautilus && sudo dpkg-divert --rename --remove /usr/bin/nautilus echo -e "\nMaking Nautilus manage the desktop again\n" nautilus --no-default-window & ## The only change that isn't undone is the installation of Thunar ## Should Thunar be removed? Or just kept in? ## Don't want to load the script with too many questions? } ## Make sure that we exit if any commands do not complete successfully. ## Thanks to nanotube for this little snippet of code from the early ## versions of UbuntuZilla set -o errexit trap 'echo "Previous command did not complete successfully. Exiting."' ERR ## This is the main code ## Is it necessary to put an elseif in here? Or is ## redundant, since the directory pretty much ## either exists or it doesn't? ## Is there a better way to keep track of whether ## the script has been run before? if [[ -e /usr/share/applications/nonautilusplease ]]; then restorenautilusdefault else makethunardefault fi;

    Read the article

  • LSI RAID-on-chip with RAID6 over two SAS links goes red when HDD enclosure is powered cycled; how to recover?

    - by GregC
    I have a RAID6 array managed by LSI 9286-8e card. I also have Sans Digital 24-bay NexentaSTOR JBOD enclosure with SAS extender built-in. They are connected to separate UPS devices. Normally, I'd shut down the PC, leaving RAID6 in healthy state. But today the power to JBOD enclosure was cut but PC kept running. After restarting the PC, all disks in RAID6 have lit up RED, and the only option in LSI MegaRAID manager app was to reset each disk to unassigned, thereby loosing all data on RAID6 array. Thankfully, I am only testing, but how would I recover if this were to happen in production?

    Read the article

  • Virtual Disk Service Loader has stopped working

    - by Leigh Riffel
    We have several relatively recent (less than 1 week) installations of Windows Server 2008 R2 Enterprise that are getting this error whenever we open Disk Management. The application name is vdsldr.exe and the Problem Event Name is BEX64. The windows firewall was turned off and the service disabled. The Virtual Disk service was started (identical results when it is stopped). The computers are virtual machines running on VSphere, so that could be part of the problem. The strange thing is that Disk Manager worked fine when the VMs were first created.

    Read the article

  • CPU Usage at 100% with "Hardware Interrupts"

    - by eventualEntropy
    After turning on my desktop one day, I found that my CPU usage was maxed out at 100%, with 99% of that going to hardware "Interrupts". I tried to enable/disable all my devices one by one through the device manager, and found that I could get the CPU usage used by the Interrupts down to 50% by disabling all devices labelled "USB Host Controller" (except the ones for the mouse/keyboard). I found that I also got 10-20% more from disabling "High Definition Audio Controller". Following the tutorial at: http://www.msfn.org/board/topic/140263-how-to-get-the-cause-of-high-cpu-usage-by-dpc-interrupt/ Led me to similar conclusions (that is, that the culprit is mostly "USB Host Controller"): I've tried updating my asus motherboard driver and my video card driver. This is on Windows 7 64 bit. I've spent hours trying to figure this out and I'm running out of ideas short of formatting (which might still not fix it!).

    Read the article

  • GDM Won't Automatically Start After Boot

    - by Mikey.B
    Ubuntu 10.04 Hi guys. I'm not sure why but quite recently, my ubuntu desktop started bringing up the command prompt login screen after booting. I want GDM to start up by default. I can manually bring up GDM by typing: sudo service gdm start or sudo /usr/sbin/gdm but I want something more permanent. The contents of /etc/X11/default-display-manager point to /usr/sbin/gdm The chkconfig status for GDM shows that it's off on all run levels... could that be it? I tried running: sudo chkconfig --add gdm and just got errors... Any ideas? How can I get GDM to automatically come up again? Any/all help is appreciated! -M

    Read the article

  • How do I mount a HFS+ dd image in OSX?

    - by Paul McMillan
    I had an HFS+ formatted drive that was going bad and wouldn't mount at all on OSX. I created an image using ddrescue on linux, and was able to save most of it. I can mount the drive and see the data just fine in linux using this: mount -o loop -t hfsplus dd_image mountpoint This doesn't work on my OSX system since hfsplus isn't a valid filesystem type. If I try: mount -t hfs image mountpoint It complains that it needs a block device. What's the fix here?

    Read the article

< Previous Page | 452 453 454 455 456 457 458 459 460 461 462 463  | Next Page >