Search Results

Search found 19676 results on 788 pages for 'hardware interface'.

Page 459/788 | < Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >

• Using a MiFi via WDS

  - by Joril

  I have a Huawei R201 MiFi connected to the internet, and I'd like to use its internet connection even from devices that don't have WiFi, so I grabbed a wireless router I had lying around and configured WDS so that it'd connect to the MiFi, and this is working nicely (I can ping the MiFi from the router web interface). The next step was connecting my PC to the router via ethernet cable, but now I'm stuck... The PC can ping the router, but not the MiFi (they're all on the same subnet). Since the router can ping the MiFi, I guess this is some kind of routing issue? Should I get a more "flexible" router, such as one with DD-WRT maybe? Is what I'm trying to do even possible? (For the record the PC is running Lubuntu 11.10)

  Read the article

• What software can I use to pinpoint why Windows Server 2003 takes 15 seconds for any operation?

  - by Dr. Zim

  Ram is about 1/2 in use, four CPUs are all but idle. I tried "Microsoft Server Performance Advisor" with no luck. No entries in the Event Log for hardware failures, etc. And yet I can click on the start menu and wait 15 seconds for any new attempt. Launching software takes 30 seconds to respond. The server has an 8 drive WD RE 250 gig each Dell Perc 6 Sata raid array with Intel gigabit network cards. Anyone have any software titles that could analyze what is going wrong with this server?

  Read the article

• How do I identify which rewrite rule is being trigger on IIS 7.5?

  - by Jordan Reiter

  I have a set of rewrite rules (offhand, I would say around 40-50) for a given server. It's basically to handle and reroute mangled URLs so that bad links still go to where they're supposed to go. I've come across an URL that is redirecting and I can't figure out which rewrite rule it is applying. My background is Apache and in that case I'd simply enable a rewrite log and look at the logged output to figure out what was happening. Is there an equivalent way to do this in IIS? bonus round Any way for me to view & edit the rewrite rules in a text file rather than the GUI interface?

  Read the article

• mysql connector/net ssl shutsdown the server

  - by Simon

  Hello, when I try to connect my server throw connector/net using ssl with pfx certificate I had problem with establishing the connection. I get connection timeout. And the server probably fall down (I dont know it for sure, becouse I dont manage the server). On the Windows XP works all right, but on Windows 7 dont. Please, where is problem? In Windows 7 or on the server (mysql 5.0)? Sometimes I get "Calling interface SSPI Failed" error, but not everytime. Sometimes is only connection timeout error. Thank you a lot for any help. Regards, simon

  Read the article

• "custom" routers for VPN - useful or waste of money?

  - by Andrew Heath

  I use VPN in China and my current service contract expires soon so I was checking what sort of plans are out there now. I found that Witopia offers a "Cloak Box", what appears to be a Linksys wireless router with allegedly hacked/custom firmware to support VPN. Aside from allowing multiple computers to share one VPN connection, is there anything else at work here to justify that price when most new routers are $100 or less these days? Or is this something targeted towards the cd-rom cupholder crowd? And yes, I've contacted them, but haven't heard back yet... EDIT I've heard back from the company - here are the details if anyone else is interested: the router is a Linksys WRT54GL running TomatoVPN custom firmware the hardware waranty is one (1) year, from Linksys/Cisco the VPN is hard-set, so any device connected to the router MUST use the VPN (Witopia blocks torrents) I've decided it's not for me, but hopefully this information will prove useful to others.

  Read the article

• What is causing my newly built PC with Windows 7 to BSOD?

  - by Ben S

  I recently built my own PC from parts and installed Windows 7 and I have been getting BSODs with various different stop codes. The latest was 0x24, but I've also had 0xd1 and 0x1e. However, Windows does not let me know where the fault occurred, so I have no idea how to go about resolving this. I know the cause is likely a hardware driver, but I don't know which and cannot find information about how to use the minidumps to troubleshoot my problem. I've uploaded the last three minidumps in case someone can make sense out of them and let me know what could be causing my BSODs. Thanks, Ben

  Read the article

• How to customize Windows 7 HAL library during installation (BSOD STOP: 0x000000A5)?

  - by koldovsky

  While trying to install Windows 7 x86 Ultimate on Samsung M40 laptop (Pentium M 1.7 Dothan, 2 GB RAM/ 100 GB HDD) i receive BSOD STOP: 0x000000A5: The bios in this system is not fully ACPI compliant. Please contact your system vendor for an updated bios. The bios on the system is updated to latest version. If ACPI is the real source of the issue it means that I possibly could use another HAL library. In Windows XP it is possible to install system with generic HAL library pressing F7 when installer asks to supply drivers, but on Windows 7 I can't find such option. Ironically, Vista installs and works nice, even if they said that Windows 7 is less demanding for hardware. Windows 7 Advisor also tells nothing suspicious. Can anybody tell me how to customize Windows 7 installer to use generic HAL library (if it is possible, of course) or point me to another solution?

  Read the article

• How to clone and deploy multiple machines?

  - by Mimi

  Hi, See what I wanna do is basically make bootable clones or disc images or whatever(let's call it "stuff" for now ) and store many of them in a single big HDD. Then, I wanna use that big HDD and the "stuff" in it to be able to deploy new machines without the hassle of reinstalling Windows and whatnot(i.e. I do not want to restore nor simply clone a same machine, I literally want to use clones to save time during machine set up). Obviously I'd deploy the "stuff" onto an HDD going into a machine that I know the hardware of to avoid driver issues and whatnot. I alos have enough Windows keys to deal with the multiple activations. I tried using Acronis True Image but it doesn't seem to do what I want(unless idk how to use it properly). Any advice is welcome thanks :)

  Read the article

• development and music recording machine suggestions?

  - by dean nolan

  I wasn't sure if this belongs on SuperUser so flag if so. I am looking to build, primarily, a windows development machine that is also good for recording using Cubase. I know I should use seperate machines but I'm on a budget this time of year. I also havn't kept up with hardware for quite a few years. Basically I know I want quad core, multiple monitor support (no gaming requirements). A lot of RAM, very quiet case and super fast HDD (SSD OR 10,000RPM)for compiling and latency. I will store libraries and other data on a USB drive. Sound card is not needed as I will be using an audio interface, all other music recording equipment is taken care of also. I could do with some decent monitor recomendations also. All suggestions welcome, thanks.

  Read the article

• Exchange 2010 domainprep messing up mailbox permissions on existing Exchange 2003 server

  - by tearman

  So our environment is basically we have an Exchange 2003 server, and we're attempting to move to Exchange 2010 gradually, and move to new hardware while we're at it. So our first step was obviously to get Exchange 2010 installed on the new box. However, after running the domainprep steps listed in http://technet.microsoft.com/en-us/library/bb125224.aspx (including PrepareLegacyExchangePermissions) our mailbox permissions get messed up. Normally, we have an AD security group for Exchange Administrators that allows anyone in that group to view all folders inside any user's mailbox. However, now, this functionality is gone and our Exchange Admins can't access anyone's mailboxes. We'd like to get this functionality back if we could. Thanks

  Read the article

• EC2-like virtualisation platform with non-RDP access

  - by code'

  I'm looking into setting up a few small VMs. The trouble is the software I intend to install on them (Cisco VPN Client) blocks out networking (other than to the target VPN destination...) with no workaround. This means that Remote Desktop or other methods of connecting to VMs that go via the Internet (e.g. GoToMyPC, LogMeIn) are a non-starter. What I'm really looking for is an EC2-like platform but which gives direct access to the VM through (for example) Hyper-V Manager. Sadly the only way they all seem to offer to remote control the VMs is direct access via Remote Desktop, whereas I need to be one layer above that (if that makes sense). A viable alternative would be to run virtualisation software within a Windows EC2 instance; obviously hardware virtualisation is impossible but I wonder if there are any software virtualisation platforms that could be run and that would work. Does anyone know if something like this exists/is possible? Thanks! C

  Read the article

• Can using higher rated battery damage device?

  - by Anwar Shah

  I am in need of a battery for my Lenovo 3000 Y410 Laptop. It's installed battery has voltage rating of 10.8v. But the shop i've consulted has only a battery of 11.1v rating. Should I buy the battery? I mean, Does using that battery can damage my laptop? An answer with some good source from hardware vendor will be very much helpful. Please do not just put your opinion. Because I do not see any difference in your opinion and my opinion. My opinion is also "It is bad". But I need some reliable source.

  Read the article

• How can I be sure that the motherboard is dead and it's not another issue?

  - by Peter

  So I have and old computer with and Intel D101GGC motherboard and a pentium 4 cpu and award bios, with a long repeating beep and not passing POST. I tried: RAM checking, they are good and working on other computers Replacing the PSU with a tested one, and still having the same issue I assumed that the CPU is dead and tested 2 others they are both Celeron D processors I also tested the CPU of this computer on another one and it's working fine I also tried it without RAM and still have the same long beep I did all this after disconnecting all the other hardware like HDD and DVD drives. The only time I didn't get any beeps is after removing the CPU I don't know if the processor is needed for the beeps to work. So My questions are: is it normal to not get any beeps if we don't have a CPU installed ? am I missing something or is the motherboard dead ? and thanks in advance.

  Read the article

• How can I watch TV on my Computer (Not Online)?

  - by Sammy

  Novice question here, but how can I watch TV on my PC without using online sites? I have heard of tv tuners but is it just a matter of hooking a tv tuner to your computer and that's it? Do I have to just buy a tuner or pay for a service as well? If no service needs to be paid for, will I get just regular channels or cable/satellite channels as well? Will my PC need to be connected to the Internet when I want to watch TV? Do I need any type of software aside from the hardware tuner?

  Read the article

• Unknown protocol when trying to connect to remote host with stunnel

  - by RaYell

  I'm trying to set up a stunnel for WebDav on Windows. I want to connect 80 port on my local interface to 443 on another machine in my network. I can ping the machine remote machine. However when I use the tunnel, I'm getting this error all the time SSL state (accept): before/accept initialization SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol There is nothing in the logs on the other machine and here's my stunnel connection config [https] accept = 127.0.0.2:80 connect = 10.0.0.60:443 verify = 0 I've set it up to accept all certificates so this shouldn't be a problem with a self-signed certificate remote host uses. Does anyone knows what might be the problem that this connection cannot be eastablished?

  Read the article

• Re-enabling audio on an iMac

  - by Warren Seine

  Hello guys, I know Super User is not a 'tech support' forum, so I will try to make it short: my computer's sound does not work anymore. I have asked for support on the Apple board but I feel a bit on my own. To summarize, the Sound Panel of my iMac does not display any outgoing channel (headphones or internal speakers). It does not work on Windows either. Contrary to what it may seem, I have the feeling that it is not a hardware issue (and that GarageBand is somehow interfering). If you have an idea to solve the problem, please share. Making it work again is a lost cause without sending it back to Apple, so the question I'm asking is: What is the best workaround (cheap Firewire sound card?) for getting my sound back? Thanks.

  Read the article

• Uninstall Dell Wave

  - by Onion-Knight

  The image we put on our company laptops includes the Dell Wave interface for Biometric log in. The Wave UI increases boot time by about 5 minutes (because it loads the fingerprint database(a feature I don't use)), so I'm trying to uninstall it, but with little success. There is no line-item in the Add/Remove Programs menu to formally delete it, nor is there a Service I can stop/remove to disable the Wave UI. I've tried looking online, but all I find instead are hits for Google Wave and virus-removal forums with HyjackThis dumps that include Dell Wave records. Any ideas?

  Read the article

• windows seven disk check error

  - by crazybmanp

  i have gotten the error in the microsoft KB article 975778 (http://support.microsoft.com/kb/975778/en-us) i was able to get onto my computer luckily, but when i went on to get the hotfix that is stated in the article, it gave me this error when i ran it: "the update is not applicable to your computer." is there any way of getting the disk check error to stop, or to get this fix to work. i will answer any questions on hardware if you post the questions in the comments. answers to questions this is the a full version that i got from ASUS as an upgrade disk from windows vista (hopefully more specific than you were asking)

  Read the article

• How to make phone calls using a phone

  - by user18151

  Hi, I have a phone landline connection and I DO NOT have a phone instrument. I connect the cable into my laptop, and want to make calls using my laptop. I have an HDA CX20561 modem. I seem to be able to dial number using dialer.exe, though nothing seems to happen. From Microsoft kb http://support.microsoft.com/kb/958143, it looks like dialer.exe alone is not enough for the call. Can somebody tell me how to make and receive phone call with whatever hardware I have, i.e. what software will I need. Thanks.

  Read the article

• Xen on bare metal, Mac OS X 10.6, Vista, Debian as guest OSes

  - by Mischa Arefiev

  I have: a desktop PC (Athlon 64, 2 cores) ...that came with Windows Vista, and a retail DVD of Mac OS X 10.6 I want: to install Mac OS X through Hackintosh (I believe my hardware is suitable), to also run Windows Vista with full 3D support for video games and Youtube, to also run Debian GNU/Linux with optional 3D for work. I don't think my CPU supports VT-x, but it should have AMD-V. So the question is: Can all of this be done with Xen (Xen on bare metal, all three OSes as guests)? Or should I just try to install OS X first and then run Vista and Debian in Parallels?

  Read the article

• Xerox Workcentre 3119 and Linux

  - by Milan Babuškov

  I'm trying to get Xerox Workcentre 3119 printer to work on Linux. It's a multifunction device (printer and scanner). I run the CUPS web interface at: http://localhost:631/ and it recognizes it on USB port and even suggests Gutenprint driver from the list. When I try to print a test page, the printer goes through "warming up" process (i.e. lights blink and sound is heard) but does not print anything. There are no errors in /var/log/cups/error_log and access_log shows as if everything is ok. The printer works fine in Windows XP. Does anyone have any experience with this printer on Linux?

  Read the article

• Outlook.com custom domain, Exchange ActiveSync too many connected devices

  - by Mike C.

  I just setup Outlook.com to run on a custom domain. The web interface works well but when I connect it to Outlook 2013 I get the following error: There are too many devices syncing with this account. To sync using Outlook, try removing another device that is connected with this account such as a phone or another computer. File: outlook\pstprx\storeas\utils\airsyncstatuscodes.h Line: 88 HTTP/1.1 200 OK FolderStatus: 177 To re-try press F9... Error Code: 0x80004005 I've done my home work, using Google, and found that it is often due to having 3 or 4 devices connected to an account with 50+ folders. My account is empty, no email or folder, and is not synced with any devices, I confirmed that on http://devices.live.com. I'm out of option, any help would be greatly appreciated! Thank you

  Read the article

• Importing email from other accounts in Gmail

  - by reyjavikvi

  I have a Gmail account that imports (via POP) messages from an old Hotmail account that people still send mail to. I normally read my mail with Thunderbird, not the web interface. The thing is that Gmail imports the mails once per hour (approx), and sometimes I want to know if right now there are messages in my old account. I could just go and hit the "import now" button, but whatever. Is there someplace in the settings where I can change it so the importing happens once each, say, 15 minutes? Alternatively, is it possible to make a script that will tell Gmail to import the messages at that moment, just like it would if I went to the Settings and clicked "Check if I have mail now". I've heard about libgmail for Python, but it doesn't seem like it can do that.

  Read the article

• problem with crating table on phpMyAdmin database

  - by tombull89

  Hello all, I'm running a phpMyAdmin Database on my web package on a 1and1-hosted server. I've managed to set up a database in the control panel, have uploaded all to root/phpmyadmin and changed the config.ini.php file to point at 1and1's database server (because that's the way they do it). I can go to the web interface and get to the main page, but all it shows is the database name and I can't find how to create any tables. I know it's a long shot but I'm almost out of ideas. Also, 1and1 have their own phpmyadmin panel, which is pretty annoying to use, and a 1and1 webdatabase which I have barely looked at. Help and suggestions much appriciated.

  Read the article

• Debian 6 Internet connection sharing aka IP masquerade not working

  - by Rautamiekka

  The problem: the computers [Xbox 360 and a Kubuntu 12.04.1 laptop] can't access Internet through a recently-installed desktopless Debian 6 laptop (which is wirelessly connected to a WLAN station) but addresses are successfully given by dnsmasq. The attempts: 1.1) /etc/dnsmaq.conf conffed according to http://wiki.debian.org/HowTo/dnsmasq: add lines interface=eth0 dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h 1.2) Follow http://www.cyberciti.biz/faq/rhel-fedora-linux-internet-connection-sharing-howto/ and use their script to setup iptables. 2) Follow the Ubuntu Internet Gateway Method (iptables) at https://help.ubuntu.com/community/Internet/ConnectionSharing recommended and which worked at Share internet in Linux. The Debian laptop was rebooted many times and between each attempt, with and without the script auto-executing via /etc/rc.local. While adding the iptables-restore command to that file I disabled the script.

  Read the article

< Previous Page | 455 456 457 458 459 460 461 462 463 464 465 466  | Next Page >