Search Results

Search found 16808 results on 673 pages for 'computer guru'.

Page 461/673 | < Previous Page | 457 458 459 460 461 462 463 464 465 466 467 468  | Next Page >

  • LGA 1155 or LGA 2011? Which has a brighter future?

    - by Langdon
    I'd basically like to rehash this question, only 22 months later. The last system I built was in 2006, shortly after AMD came out with socket AM2. I was able to upgrade the processor on it 3 times and would love to do the same with my next computer. Since AMD seems to be lagging, I'm going for Intel this time. I've read that Intel changes chip sets all the time, so there's no safe bet. I also read (1 comment on 1 forum) that said LGA 2011 will have 8-core support, but LGA 1155 won't, which leads me to believe that LGA 2011 might be a better choice. Anyone have any good advice for me?

    Read the article

  • Power cut during Ubuntu upgrade to 10.04 - boots to command line, apt-get and dpkg do not work.

    - by Macha
    I was upgrading Ubuntu to 10.04, when a tripswitch tripped, cutting power to the computer. When it was restarted, it booted into a command line prompt. Google tells me to try: sudo dpkg --configure -a This gets me a lot of output that ends with a list of packages. I can't tell you what the output is, as piping the output to more/less does not work (still just all scrolls by and moves to next prompt), and redirecting it to a file just results in an empty file. Google also suggested: sudo apt-get install -f This also didn't work. Is a fresh install the only solution at this point?

    Read the article

  • Making backup of the System Restore Partition with netbooks

    - by devoured elysium
    I have a netbook that has two partitions. A first one where I have all my programs and stuff and a second one that came with the netbook and has the data so I can restore my computer if I need to. Now, as I had problems in the past with other computers that had a similar restore scheme, I know I must in some way do a backup of this partition, so if there is any problem I can put everything working again. How should I proceed? As this is a netbook, it doesn't have a CD reader. Maybe doing a backup of this partition to a 12GB(it seems this partition occupies this much!) usb? How could I do it? Thanks

    Read the article

  • How do i get a more recent version of Java on my Mac than is showing up in software update?

    - by Cd Lolly
    I need at least Java 1.6 to run a program that someone else in my lab wrote On the Java website it tells me to update Java via apple's software update function, i've run this a few times but it only got up to Java 1.5.0_24 and it now says no more updates are available for my computer Is there another way to update Java on a Mac? Is my operating system maybe to old for Java 1.6? i'm not sure what i'm running exactly, and i can't find a list of what mac operating systems run what versions of Java because the java site just suggests using Mac's software update.

    Read the article

  • How can I remove the ssh last login info?

    - by Gnijuohz
    Whenever I log into a server using ssh. The prompt gives me "last login" information. I was wondering where this information comes from. How can I remove this record so when someone else log into the same server, the person would see my login info with my ip in it? So how can I do this? For the record, I am not hacking someone's computer and the server runs Ubuntu 12.04. EDIT: which file logs this kind of information? If I find the file, then I can do anything to it as root. Thanks.

    Read the article

  • nautilus crash when merging/overwriting files

    - by sBlatt
    On my Ubuntu 10.10, whenever I want to copy some files/folders over some other files/folders, or when I try to empty the trash, nautilus crashes! Example: I have a folder with some files. Now I want to overwrite this folder with a folder with the same name, same files, but some additional files, the merge window comes up, I choose merge and nautilus crashes (does not respond, when I press the close button I can force close it). Some times it even does the copying/emptying (trash), but it always crashes! This happens when copying to the same partition/ntfs partition/netshares, but not when I make a new folder and copy the files/folders into that (without overwriting anything). On a netshare, it's even possible to merge these files afterwards with another computer! dmesg/syslog/messages does not show any entry related to that problem. Does anyone have a solution for this very annoying problem? EDIT: dpkg -l nautilus* (see output in pastebin) EDIT2: I found out, nautilus already crashes before clicking replace/merge (as soon as the question appeares. In the video it's not entirely clear, that i click the cross before the force-close dialog appeares. Video of problem nautilus-debug-log.txt EDIT3: Filed bugreport: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/678233

    Read the article

  • Unix: Sync directory with FTP or SFTP directory

    - by Svish
    I have a website on my local computer running Mac OS X. I am wondering if there is any built-in command that I can run in the Terminal that will upload that website to my webserver either through FTP or, if possible, SFTP. Installing new commands through MacPorts is also a possibility. A big bonus would be that it only uploaded the files that needs to be updated and not everything else. It would also be nice if I can tell it to delete the files on the server that no longer exists locally once in a while. Any good tips?

    Read the article

  • apt-get failed install of libg15, all package management is failing

    - by Stifle
    I was trying to get my Logitech G510 keyboard's back-lights working so I went into the Synaptic Package Manager and marked LibG15, G15daemon, and all the other associated packages. Synaptic reported a failed install. Now all Package management is failing due to libg15 being "halfway installed." Some commands I have tried to fix the problem follow. . . root@bt:~# apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done E: The package libg15 needs to be reinstalled, but I can't find an archive for it. root@bt:~# sudo apt-get autoremove Reading package lists... Done Building dependency tree Reading state information... Done E: The package libg15 needs to be reinstalled, but I can't find an archive for it. root@bt:~# sudo apt-get -f purge libg15 Reading package lists... Done Building dependency tree Reading state information... Done E: The package libg15 needs to be reinstalled, but I can't find an archive for it. root@bt:~# sudo dpkg --configure -a dpkg: dependency problems prevent configuration of g15macro: g15macro depends on g15daemon; however: Package g15daemon is not configured yet. dpkg: error processing g15macro (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of g15stats: g15stats depends on g15daemon; however: Package g15daemon is not configured yet. dpkg: error processing g15stats (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: g15macro g15stats I'm not too computer savvy. Any help would be much appreciated!!! Note: I'm using Ubuntu 10.04 under Backtrack 5 R3.

    Read the article

  • Removed Java replaced with newest "Sun Java", disc won't boot, and won't let me re-install grub using boot repair disc

    - by Al Rowe
    Had a minor problem with my Stock market platform. Set-up screen would freeze program. Called their tech support, got their "Linux guy", who advised remove all Java and replace, not with synaptic version, but newest Sun Java. After removing, computer auto rebooted, and went to blue mem-test screen. Showed no errors, but couldn't get back in. Tried two versions of boot repair disc from iso (checked md5sum, showed good.), but fix aborted, giving apt-error detected. Opened a terminal and typed (or copy/paste): sudo chroot "/mnt/boot-sav/sda1" apt-get -f install. My system is Ubuntu 12.04. Had a few very minor issues from install, all fixed. Also added some of my favorite gnome tricks just to make life easier, but none that could have caused this. Added script to add shortcuts to desktop, open terminal in any menu from inside it, access root terminal, etc. System was firewalled and using avast antivirus (o.k., I'm paranoid. Used to do Windows sys-op and security.) But relative newbie to Linux.

    Read the article

  • What does the fan speed sensor really report?

    - by T. Verron
    I have an overheating issue on my netbook (ASUS EeePC 1015PW), which I'm trying to troubleshoot. Using lm-sensors while overheating gave me this output : acpitz-virtual-0 Adapter: Virtual device temp1: +86.0°C (crit = +100.0°C) eeepc-isa-0000 Adapter: ISA adapter fan1: 4089 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +82.0°C (crit = +100.0°C) Core 1: +80.0°C (crit = +100.0°C) But I can't hear the fan. So I enabled manual pwm controling and set the fan to full speed, and after a few minutes I got this output : acpitz-virtual-0 Adapter: Virtual device temp1: +65.0°C (crit = +100.0°C) eeepc-isa-0000 Adapter: ISA adapter fan1: 4016 RPM coretemp-isa-0000 Adapter: ISA adapter Core 0: +62.0°C (crit = +100.0°C) Core 1: +58.0°C (crit = +100.0°C) And this time I could hear the fan spinning. So there's quite obviously an issue with either fan control or fan monitoring. Hence the question : what kind of physical information does the fan sensor really report? Thank you PS. I should have added that the computer is a small, hard-to-disassemble netbook, so I can't and don't want to try experiments like "block the fan and see what the sensor reports".

    Read the article

  • Possible to install Xmonad on Ubuntu separate from Gnome?

    - by Kurtosis
    I just downloaded Xmonad from the repository on my Ubuntu 10.04 box, but when I log out and try to log back in using Xmonad instead Gnome, it doesn't work. I just get the login screen background image and a mousepointer, and nothing else. Right-clicking does nothing, no menus or anything. Key combo's like Ctrl-X, Ctrl-Z, and Ctrl-Alt-Delete do nothing either. Left the computer in this state for 30 minutes while I went to the grocery store, but it was still hung when I returned and I had to hard-reboot it. A Google search returned a few sites showing how to configure Xmonad to work with Gnome, but I'm afraid to try this since I don't want to risk borking my Gnome installation, at least not until I've had a chance to learn Xmonad a bit. Is it possible to run Xmonad independently of Gnome? If so, anyone have any idea what might be wrong and how to fix it?

    Read the article

  • I don't understand the definition of side effects

    - by Chris Okyen
    I don't understand the wikipedia article on Side Effects: In computer science, a function or expression is said to have a side effect if, in addition to returning a value, it also 1.) Modifies some state or 2.) Has an observable interaction with calling functions or the outside world. I know an example of the first thing that causes a function or expression to have side effects - modifying a state Function and Expression modifying a state : 1.) foo(int X) { return x = x % x; } a = a + 1; What does 2.) - Has an observable interaction with calling functions or the outside world," mean? - Please give an example. The article continues on to say, "For example, a function might modify a global or static variable, modify one of its arguments, raise an exception, write data to a display or file, read data, or call other side-effecting functions...." Are all these examples, examples of 1.) - Modifiying some state , or are they also part of 2.) - Has an observable interaction with calling functions or the outside world?

    Read the article

  • Port forwarding through a client bridge

    - by Gabe Tanenhaus
    I am having a problem with port forwarding with a client bridge. My main router is a 2wire router from AT&T using their firmware. It is a Router/Modem. In my room, there is a Linksys WRT54GL with DD-WRT on it. I have set up the DD-WRT one as a Client bridge for my PC. I can access the internet on my computer using it but when I try and port forward, the ports stay closed. I am port forwarding on my main router (2wire) and it doesn't work. I have checked online and all I see is that I should only need to forward on the main router since the client bridge has NAT disabled, but it seems to not work that way. Any ideas?

    Read the article

  • Intermittent ethernet connectivity

    - by Amey Jah
    I am facing a weird problem. I am connecting to my dsl modem via ethernet. After booting, sometimes Ubuntu 10.10 does not detect the eth0 card properly or does not connect to the modem. I have made the following observations: My modem is fully on. All indicators are on except ethernet, which is blinking continuously. My network indicator applet informs me that I am connected to modem, but I am not able to browse as it has not established connection with modem. I need to power off and on (restart) the modem several times OR disconnect/connect (via network applet) several times, before the system can establish a connection with the modem. Once it establishes the connection, the ethernet LED (on modem) stops blinking and glows continuously. However, I do not see this problem every time I reboot or start my computer. 3/5 time, it connects to the modem in a single attempt. Friends, I am not able to understand root cause of this problem. Plus I do not know what kind of logs should be attached. If you want any logs please give me command to run, and I will paste the result for you. Note: I ran system testing when above problem happened. Follow this link to download result.

    Read the article

  • Transmission shutdown script for multiple torrents?

    - by Khurshid Alam
    I have written a shutdown script for transmission. Transmission calls the script after a torrent download finishes. The script runs perfectly on my machine (Ubuntu 11.04 & 12.04). #!/bin/bash sleep 300s # default display on current host DISPLAY=:0.0 # find out if monitor is on. Default timeout can be configured from screensaver/Power configuration. STATUS=`xset -display $DISPLAY -q | grep 'Monitor'` echo $STATUS if [ "$STATUS" == " Monitor is On" ] ### Then check if its still downloading a torrent. Couldn't figure out how.(May be) by monitoring network downstream activity? then notify-send "Downloads Complete" "Exiting transmisssion now" pkill transmission else notify-send "Downloads Complete" "Shutting Down Computer" dbus-send --session --type=method_call --print-reply --dest=org.gnome.SessionManager /org/gnome/SessionManager org.gnome.SessionManager.RequestShutdown fi exit 0 The problem is that when I'm downloading more than one file, when the first one finishes, transmission executes the script. I would like to do that but after all downloads are completed. I want to put a 2nd check ( right after monitor check) if it is still downloading another torrent. Is there any way to do this?

    Read the article

  • Ubuntu Gnome 14.04 Instal Nvidia drivers

    - by user3524668
    I have been looking all over the web, and tried every suggestion I found to get the nvidia drivers working on my computer with Ubuntu Gnome 14.04, with no luck. Every time I install a driver or choose to use the driver from addition drivers, when I reebot, I cannot log in again. It gets stuck at the logo screen. I need to go to the ALT + CTRL + F1 to purge all nvidia traces so I can get back. Is it possible to install the new nvidia drivers? I just upgraded from 13.10 to 14.04, I have an Asus N550VJ which has hybrid graphics with Intel 4000 / Nvidia 750M What Im looking for is to try the primus functionality to disable the discreet card and enable it whenever I want to play or run heavy graphic stuff. When I was in 13.10 I was using bumblebee, but, since, the nvidia prime is supposedly mature enough, I wanted to try it. Is this possible for Ubuntu Gnome 14.04. I read there was a bug with gdm, but also, saw that it was already fixed. Thank you very much for your help. Im not that well versed in linux.

    Read the article

  • How complex of a daemon should be run through inetd?

    - by amphetamachine
    What is the general rule for which daemons should be started up through inetd? Currently, on my server, sshd, apache and sendmail are set up to run all the time, where simple *NIX services are set up to be started by inetd. I'm the only one who uses ssh on my computer, and break-in attempts aren't a problem because I have it running on a non-standard port, and my HTTP server gets maybe 5 hits a day that aren't GoogleBot. My question is, what are the benefits vs. the performance hits associated with running a complex daemon like sshd or apache through superserver, and what, if any successes or failures have you had running your own daemons in this manner?

    Read the article

  • Windows 7 connect to Lion file sharing

    - by McKvack
    Trying to access my Mac from a Windows 7 computer, I fail with the infamous error 86 incorrect password. Now this appears to be a well-known problem with countless threads on the internet giving as many "solutions" as there are discussion threads about it (mostly ranging from installing third-party commercial samba servers, to switching to some other protocol, to compiling a plain-vanilla Samba installation - the latter which I will probably do when I give up this :) ) I am stubborn, and I believe there must be some problem here that can be solved or worked around, but there is surprisingly little detail about this problem. It appears to have something to do with a mismatch of authentication methods. Trying to run samba in debug mode: sudo /usr/sbin/smbd -debug -stdout gets me this output when trying to access it from Win 7 ... smb1_dispatch_one [smb_dispatch.cpp:377] dispatching SMB_COM_SESSION_SETUP_ANDX smb1_dispatch_session_setup [session_setup.cpp:261] FIXME erase existing sessions log_gss_error [gssapi_mechanism.cpp:97] gssapi: gss-code: Miscellaneous failure (see text) log_gss_error [gssapi_mechanism.cpp:113] gssapi: mech-code: unknown mech-code 22 for mech unknown What is the problem here, and how do I fix it?

    Read the article

  • Deleted the GPT partition/ record

    - by Manish Kumar Singh
    A friend of mine had GPT partition n his Lenovo laptop. While formatting the computer and reinstalling the OS, I wiped of all the partitions, and created 4 new partitions. Now after installing everything, when I turned off the laptop. It isn't booting, I checked the BIOS settings, and tried booting Ubuntu off my life disc, it ran well, but again, I can't boot anymore. Later I figured out, that this is happening because I had deleted the GPT partition, and now the OS has tried to create MBR records, so basically this is the problem.

    Read the article

  • Windows cannot access my external harddisk partition but all partition managers can

    - by Ashish
    Some weird problem happened to my Maxtor 500GB external harddisk, it all started when it once freezed during some operation. Now when I insert the drive in a USB slot, Windows asks me to format it, and if I try to open the drive from my computer it says, "not accessible".. I tried most of the major partition managers and partition recovery software. All of these can see and access my partition normally. It showing the free space and used space correctly. But Windows can't. Please help me out. Including a screenshot: On the left side, the partition manager can access and see my data in the corrupted partition, and on the right side Windows can't

    Read the article

  • Having trouble getting startup scripts to work in Server 2003

    - by Az
    Thanks for taking the time to read this. I am having trouble getting my startup scripts to run correctly on the domain I am administering. Before anyone gets upset and says "go read xxx article from microsoft",... I have. I am simply missing something or not understanding it properly. I understand how to assign the script, what I am curious about is where exactly it should be placed in the Windows folder structure. I have been able to get them to work by creating a share folder called "scripts" and pointing to that exact unc pathname IE \servername\scripts\xxx.bat. However, I would like to do it properly, would someone please tell me where they should be placed in Win2003 server, and what the path name should be when assigning a group policy to do something that applies to computer specific properties? Your assistance is very much appreciated by a junior admin trying to learn some new tricks!

    Read the article

  • Working Abroad Advice Needed

    - by RBA
    Hi, First of all, Happy New Year everybody! I wish you for 2011 all the best! For several years I was thinking about to work abroad, and I want to make this step(to work in a/several foreign countries, for several years). I am a Software Developer with a Bachelor of Engineering in Computer Science, with a +4 years of experience in Delphi(and small working experience in other programming languages). Until now I've applied at aprox. 100 positions over the world, and I've been contacted by 4-5 hiring managers. Our technical discussions went good, but then we reached at working visa 'problem'. I don't have legal/health problems, but I don't poses a working permit in other countries except Romania. I've been reading several forums concerning the working visas (here I take out working visa for US or other 'hard to get visa' countries), and there are several steps which companies must do (so I can take out the bureaucracy problem) to make the papers. Concerning the cost of a visa, this goes up to one medium salary from that country(in most of the cases). I've been working for the last years with different clients, from a wide variety of countries, and I don't believe I will have problems with integration in a foreign country So, the problem is that the market don't need Delphi Developers (there is a small amount of open positions on the recruiting sites), and I should start learning other programming language(all the time is better to know other programming languages - but to master it, requires some time) with a higher market 'rank' (Java/C#/etc), OR the problem is only concerning the working visa, and maybe the reticence of the employer to foreign possible candidates? I'm asking this especially for those users who made this step in their life or they want to make it in the future. Best regards,

    Read the article

  • Can't run Ubuntu from disc

    - by alex
    When I place the boot CD in my CD drive and boot from it, I get the Ubuntu menu. I have these options Try Ubuntu without any change to your computer Install Ubuntu Check disc for defects Test memory Boot from first hard disk I can use the cursor keys to select them, and I can push F1 for help etc. However, I can not select an option. I've highlighted the first and tried enter, space bar etc. I do have a KVM, so I plugged in a 2nd USB keyboard and tried it but no go either. I can push escape and then got to the prompt. Am I doing something wrong?

    Read the article

  • QuickTime X incorrect aspect ratio for H.264 video

    - by Adam Robinson
    I'm running Snow Leopard and have a serious issue with QuickTime X. I have a Samsung HMX-H100N/XAA camcorder that records H.264 video in either 720p or 1080i. In either of these resolutions, QuickTime X (and, by extension, all QuickTime-associated applications like FCP, iMovie, etc.) displays an incorrect aspect ratio for all video produced by this camcorder. For example, 720p video is reported as being 1280x720 in the movie inspector (which is normal), but the displayed size is always at an aspect ratio of something like 63:20 (never heard of such a ratio) with sizes like 1700x539. If I open the video in QuickTime 7 player on the same computer, it is displayed correctly. If I process the video through something like MPEG Streamclip to transcode it, it displays correctly. As it stands right now I have to transcode all of my video in order to use it in any iLive (or other QT-based application) unless I want it to look ridiculous. I've tried installing Perian, but that seemed to have no effect.

    Read the article

  • How can I create a windows shutdown script from powershell/command-line?

    - by David Rubin
    I've read the TechNet pages that describe using computer/user startup/shutdown scripts, and that's great, but I'd like to create those scripts via the command-line (and not have to click around in gpedit.msc). It looks like scripts.ini and psscripts.ini in %SYSTEMROOT%\System32\GroupPolicy\Machine\Scripts specifies the scripts to run, but those don't exist until running gpedit.msc for the first time. Is it safe to create and edit those directly? Or do I need to muck around with Set-GPO or something similar? Thanks!

    Read the article

< Previous Page | 457 458 459 460 461 462 463 464 465 466 467 468  | Next Page >