Search Results

Search found 12826 results on 514 pages for 'third party controls'.

Page 461/514 | < Previous Page | 457 458 459 460 461 462 463 464 465 466 467 468 | Next Page >

career advice for PhD scientist seeking to program?

- by C SD

I'm largely a self-taught programmer. In fact, I first started programming about half way through biophysics grad school, and even though I think I've done some pretty nice work, I've never worked as part of a 'serious' development team that had more than one or two other developers (and I wouldn't hesitate to call them equally inexperienced in software development as a profession). After finishing my PhD I applied to Google, on a lark, since I had some confidence in my abilities, if not necessarily my experience, and I was hoping to maybe slip in and absorb all the experience and talent I'd be surrounded with and become productive enough, quickly enough, that they wouldn't immediately regret their decision. I was excited to actually get invited to interview up at Mountain View (this was ~ mid 2008). Overall, my memory of the interview was very positive, but after close to a three month wait (is that normal?) they ended up turning me down. I wasn't too surprised or disappointed (aside from the uncomfortably long wait) given my unusual background and admitted lack of experience. I decided to continue as a postdoc, but focus on improving my skills rather than doing research. I've done about three years of that, and my honest assessment is that I've learned a ton more, but I really need more of a peer group to maintain or accelerate my growth. Google invited me to interview again about eight months ago, and the interview process went even better than the first time around (I thought), though they again declined to give me an offer. I have to admit this second rejection was much more discouraging. They had insisted I interview even after I mentioned to them that a move on my part was unlikely given that I had bought a house, gotten married, etc. since the first interview. I guess I was hoping they'd at least give me an offer that I could parlay into a more conventional, but still interesting, programming position close to home. So here I am, going on my third year out of grad school, a glorified postdoc and I'm starting to get pretty discouraged. Even though I could technically get 'back-on-track' for a career in science, I have been focusing the vast majority of this time on gaining programming experience rather than on research and publications. The problem is, whenever I look, most job listings have requirements that seem impossibly grandiose and I hesitate to apply. That, or the job/project seems incredibly dull. Ironically, applying to Google struck me as less intimidating. I suspect that either most people are just a lot less realistic than I am when it comes to assessing how long it will take for them to get up to speed, or they don't care; my fear is that I'm just woefully unqualified for any interesting, well paying work. IE: I'm confident I could switch fully back into C++ mode with a couple weeks work (I mostly use C,Python,C# daily) but I don't list myself as being 'proficient' in C++ on my CV, or applying for jobs that 'require' such knowledge. The few applications for which I did feel I was a legitimately good match have not elicited a response. I suspect the following things are potential problems with my application/CV and I would like feedback on: I don't have a CS degree. My BS was in biochemistry and molecular biology, my PhD in biophysics. I took a undergrad and grad level CS course at UCSD and completely killed them, but I don't know how to translate that to my CV effectively. I have a PhD, but it's not in CS... I've been debating if I should remove it from my CV, and wether or not it would then be misleading to list at least some of those years as some kind of 'programming' job (in many respects it was). I think there are sometimes strong stigmas associated with 'self-taught' programmers. I am certainly one of those. I even recognize that some of those stigmas hold a hint of truth, but I really do want to be an asset to a team. How do I communicate that even though I have been largely self-directing for ~8 years I can still take marching orders when needed? Do I just say so outright? Should I just become a lot less scrupulous about the whole process? anecdote: I have a friend who applied for positions where he completely fudged his qualifications to get past the first culling. He was much more honest and forthcoming about his actual qualifications when contacted and he still managed to get invited to a couple of interviews and even got some offers. His balls are larger than mine though.

Read the article
IRM Item Codes – what are they for?

- by martin.abrahams

A number of colleagues have been asking about IRM item codes recently – what are they for, when are they useful, how can you control them to meet some customer requirements? This is quite a big topic, but this article provides a few answers. An item code is part of the metadata of every sealed document – unless you define a custom metadata model. The item code is defined when a file is sealed, and usually defaults to a timestamp/filename combination. This time/name combo tends to make item codes unique for each new document, but actually item codes are not necessarily unique, as will become clear shortly. In most scenarios, item codes are not relevant to the evaluation of a user’s rights - the context name is the critical piece of metadata, as a user typically has a role that grants access to an entire classification of information regardless of item code. This is key to the simplicity and manageability of the Oracle IRM solution. Item codes are occasionally exposed to users in the UI, but most users probably never notice and never care. Nevertheless, here is one example of where you can see an item code – when you hover the mouse pointer over a sealed file. As you see, the item code for this freshly created file combines a timestamp with the file name. But what are item codes for? The first benefit of item codes is that they enable you to manage exceptions to the policy defined for a context. Thus, I might have access to all oracle – internal files - except for 2011_03_11 13:33:29 Board Minutes.sdocx. This simple mechanism enables Oracle IRM to provide file-by-file control where appropriate, whilst offering the scalability and manageability of classification-based control for the majority of users and content. You really don’t want to be managing each file individually, but never say never. Item codes can also be used for the opposite effect – to include a file in a user’s rights when their role would ordinarily deny access. So, you can assign a role that allows access only to specified item codes. For example, my role might say that I have access to precisely one file – the one shown above. So how are item codes set? In the vast majority of scenarios, item codes are set automatically as part of the sealing process. The sealing API uses the timestamp and filename as shown, and the user need not even realise that this has happened. This automatically creates item codes that are for all practical purposes unique - and that are also intelligible to users who might want to refer to them when viewing or assigning rights in the management UI. It is also possible for suitably authorised users and applications to set the item code manually or programmatically if required. Setting the item code manually using the IRM Desktop The manual process is a simple extension of the sealing task. An authorised user can select the Advanced… sealing option, and will see a dialog that offers the option to specify the item code. To see this option, the user’s role needs the Set Item Code right – you don’t want most users to give any thought at all to item codes, so by default the option is hidden. Setting the item code programmatically A more common scenario is that an application controls the item code programmatically. For example, a document management system that seals documents as part of a workflow might set the item code to match the document’s unique identifier in its repository. This offers the option to tie IRM rights evaluation directly to the security model defined in the document management system. Again, the sealing application needs to be authorised to Set Item Code. The Payslip Scenario To give a concrete example of how item codes might be used in a real world scenario, consider a Human Resources workflow such as a payslips. The goal might be to allow the HR team to have access to all payslips, but each employee to have access only to their own payslips. To enable this, you might have an IRM classification called Payslips. The HR team have a role in the normal way that allows access to all payslips. However, each employee would have an Item Reader role that only allows them to access files that have a particular item code – and that item code might match the employee’s payroll number. So, employee number 123123123 would have access to items with that code. This shows why item codes are not necessarily unique – you can deliberately set the same code on many files for ease of administration. The employees might have the right to unseal or print their payslip, so the solution acts as a secure delivery mechanism that allows payslips to be distributed via corporate email without any fear that they might be accessed by IT administrators, or forwarded accidentally to anyone other than the intended recipient. All that remains is to ensure that as each user’s payslip is sealed, it is assigned the correct item code – something that is easily managed by a simple IRM sealing application. Each month, an employee’s payslip is sealed with the same item code, so you do not need to keep amending the list of items that the user has access to – they have access to all documents that carry their employee code.

Read the article
WIF, ADFS 2 and WCF–Part 5: Service Client (more Flexibility with WSTrustChannelFactory)

- by Your DisplayName here!

See the previous posts first. WIF includes an API to manually request tokens from a token service. This gives you more control over the request and more flexibility since you can use your own token caching scheme instead of being bound to the channel object lifetime. The API is straightforward. You first request a token from the STS and then use that token to create a channel to the relying party service. I’d recommend using the WS-Trust bindings that ship with WIF to talk to ADFS 2 – they are pre-configured to match the binding configuration of the ADFS 2 endpoints. The following code requests a token for a WCF service from ADFS 2: private static SecurityToken GetToken() { // Windows authentication over transport security var factory = new WSTrustChannelFactory( new WindowsWSTrustBinding(SecurityMode.Transport), stsEndpoint); factory.TrustVersion = TrustVersion.WSTrust13; var rst = new RequestSecurityToken { RequestType = RequestTypes.Issue, AppliesTo = new EndpointAddress(svcEndpoint), KeyType = KeyTypes.Symmetric }; var channel = factory.CreateChannel(); return channel.Issue(rst); } Afterwards, the returned token can be used to create a channel to the service. Again WIF has some helper methods here that make this very easy: private static void CallService(SecurityToken token) { // create binding and turn off sessions var binding = new WS2007FederationHttpBinding( WSFederationHttpSecurityMode.TransportWithMessageCredential); binding.Security.Message.EstablishSecurityContext = false; // create factory and enable WIF plumbing var factory = new ChannelFactory<IService>(binding, new EndpointAddress(svcEndpoint)); factory.ConfigureChannelFactory<IService>(); // turn off CardSpace - we already have the token factory.Credentials.SupportInteractive = false; var channel = factory.CreateChannelWithIssuedToken<IService>(token); channel.GetClaims().ForEach(c => Console.WriteLine("{0}\n {1}\n {2} ({3})\n", c.ClaimType, c.Value, c.Issuer, c.OriginalIssuer)); } Why is this approach more flexible? Well – some don’t like the configuration voodoo. That’s a valid reason for using the manual approach. You also get more control over the token request itself since you have full control over the RST message that gets send to the STS. One common parameter that you may want to set yourself is the appliesTo value. When you use the automatic token support in the WCF federation binding, the appliesTo is always the physical service address. This means in turn that this address will be used as the audience URI value in the SAML token. Well – this in turn means that when you have an application that consists of multiple services, you always have to configure all physical endpoint URLs in ADFS 2 and in the WIF configuration of the service(s). Having control over the appliesTo allows you to use more symbolic realm names, e.g. the base address or a completely logical name. Since the URL is never de-referenced you have some degree of freedom here. In the next post we will look at the necessary code to request multiple tokens in a call chain. This is a common scenario when you first have to acquire a token from an identity provider and have to send that on to a federation gateway or Resource STS. Stay tuned.

Read the article
.NET Winform AJAX Login Services

- by AdamSane

I am working on a Windows Form that connects to a ASP.NET membership database and I am trying to use the AJAX Login Service. No matter what I do I keep on getting 404 errors on the Authentication_JSON_AppService.axd call. Web Config Below <?xml version="1.0"?>  <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere"/> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <connectionStrings  /> <appSettings/> <system.web>  <compilation debug="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> </assemblies> </compilation> <membership defaultProvider="dbSqlMembershipProvider"> <providers> <add name="dbSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="Fire.Common.Properties.Settings.dbFireConnectionString" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression=""/> </providers> </membership> <roleManager enabled="true" defaultProvider="dbSqlRoleProvider"> <providers> <add connectionStringName="Fire.Common.Properties.Settings.dbFireConnectionString" applicationName="/" name="dbSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> </providers> </roleManager> <authentication mode="Forms"> <forms loginUrl="Login.aspx" cookieless="UseCookies" protection="All" timeout="30" requireSSL="false" slidingExpiration="true" defaultUrl="default.aspx" enableCrossAppRedirects="false"/> </authentication> <authorization> <allow users="*"/> <allow users="?"/> </authorization> <customErrors mode="Off"> </customErrors> <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" validate="false" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <location path="~/Admin"> <system.web> <authorization> <allow roles="Admin"/> <allow roles="System"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Admin/System"> <system.web> <authorization> <allow roles="System"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Export"> <system.web> <authorization> <allow roles="Export"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Field"> <system.web> <authorization> <allow roles="Field"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Default.aspx"> <system.web> <authorization> <allow roles="Admin"/> <allow roles="System"/> <allow roles="Export"/> <allow roles="Field"/> <deny users="?"/> </authorization> </system.web> </location> <location path="~/Login.aspx"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/App_Themes"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/Includes"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/WebServices"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/Authentication_JSON_AppService.axd"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" type="Microsoft.CSharp.CSharpCodeProvider,System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" warningLevel="4"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> <compiler language="vb;vbs;visualbasic;vbscript" extension=".vb" type="Microsoft.VisualBasic.VBCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" warningLevel="4"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="OptionInfer" value="true"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom>  <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ScriptModule"/> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory"/> <remove name="ScriptHandlerFactoryAppServices"/> <remove name="ScriptResource"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" verb="GET,HEAD" path="ScriptResource.axd" preCondition="integratedMode" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </handlers> </system.webServer> <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> </assemblyBinding> </runtime> </configuration>

Read the article
Xml failing to deserialise

- by Carnotaurus

I call a method to get my pages [see GetPages(String xmlFullFilePath)]. The FromXElement method is supposed to deserialise the LitePropertyData elements to strongly type LitePropertyData objects. Instead it fails on the following line: return (T)xmlSerializer.Deserialize(memoryStream); and gives the following error: <LitePropertyData xmlns=''> was not expected. What am I doing wrong? I have included the methods that I call and the xml data: public static T FromXElement<T>(this XElement xElement) { using (var memoryStream = new MemoryStream(Encoding.ASCII.GetBytes(xElement.ToString()))) { var xmlSerializer = new XmlSerializer(typeof(T)); return (T)xmlSerializer.Deserialize(memoryStream); } } public static List<LitePageData> GetPages(String xmlFullFilePath) { XDocument document = XDocument.Load(xmlFullFilePath); List<LitePageData> results = (from record in document.Descendants("row") select new LitePageData { Guid = IsValid(record, "Guid") ? record.Element("Guid").Value : null, ParentID = IsValid(record, "ParentID") ? Convert.ToInt32(record.Element("ParentID").Value) : (Int32?)null, Created = Convert.ToDateTime(record.Element("Created").Value), Changed = Convert.ToDateTime(record.Element("Changed").Value), Name = record.Element("Name").Value, ID = Convert.ToInt32(record.Element("ID").Value), LitePageTypeID = IsValid(record, "ParentID") ? Convert.ToInt32(record.Element("ParentID").Value) : (Int32?)null, Html = record.Element("Html").Value, FriendlyName = record.Element("FriendlyName").Value, Properties = record.Element("Properties") != null ? record.Element("Properties").Element("LitePropertyData").FromXElement<List<LitePropertyData>>() : new List<LitePropertyData>() }).ToList(); return results; } Here is the xml: <?xml version="1.0" encoding="utf-8"?> <root> <rows> <row> <ID>1</ID> <ImageUrl></ImageUrl> <Html>Home page</Html> <Created>01-01-2012</Created> <Changed>01-01-2012</Changed> <Name>Home page</Name> <FriendlyName>home-page</FriendlyName> </row> <row xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Guid>edeaf468-f490-4271-bf4d-be145bc6a1fd</Guid> <ID>8</ID> <Name>Unused</Name> <ParentID>1</ParentID> <Created>2006-03-25T10:57:17</Created> <Changed>2012-07-17T12:24:30.0984747+01:00</Changed> <ChangedBy /> <LitePageTypeID xsi:nil="true" /> <Html> What is the purpose of this option? This option checks the current document for accessibility issues. It uses Bobby to provide details of whether the current web page conforms to W3C's WCAG criteria for web content accessibility. Issues with Bobby and Cynthia Bobby and Cynthia are free services that supposedly allow a user to expose web page accessibility barriers. It is something of a guide but perhaps a blunt instrument. I tested a few of the webpages that I have designed. Sure enough, my pages fall short and for good reason. I am not about to claim that Bobby and Cynthia are useless. Although it is useful and commendable tool, it project appears to be overly ambitious. Nevertheless, let me explain my issues with Bobby and Cynthia: First, certain W3C standards for designing web documents are often too strict and unworkable. For instance, in some versions W3C standards for HTML, certain tags should not include a particular attribute, whereas in others they are requisite if the document is to be ???well-formed???. The standard that a designer chooses is determined usually by the requirements specification document. This specifies which browsers and versions of those browsers that the web page is expected to correctly display. Forcing a hypertext document to conform strictly to a specific W3C standard for HTML is often no simple task. In the worst case, it cannot conform without losing some aesthetics or accessibility functionality. Second, the case of HTML documents is not an isolated case. Standards for XML, XSL, JavaScript, VBScript, are analogous. Therefore, you might imagine the problems when you begin to combine these languages and formats in an HTML document. Third, there is always more than one way to skin a cat. For example, Bobby and Cynthia may flag those IMG tags that do not contain a TITLE attribute. There might be good reason that a web developer chooses not to include the title attribute. The title attribute has a limited numbers of characters and does not support carriage returns. This is a major defect in the design of this tag. In fact, before the TITLE attribute was supported, there was the ALT attribute. Most browsers support both, yet they both perform a similar function. However, both attributes share the same deficiencies. In practice, there are instances where neither attribute would be used. Instead, for example, the developer would write some JavaScript or VBScript to circumvent these deficiencies. The concern is that Bobby and Cynthia would not notice this because it does not ???understand??? what the JavaScript does. </Html> <FriendlyName>unused</FriendlyName> <IsDeleted>false</IsDeleted> <Properties> <LitePropertyData> <Description>Image for the page</Description> <DisplayEditUI>true</DisplayEditUI> <OwnerTab>1</OwnerTab> <DisplayName>Image Url</DisplayName> <FieldOrder>1</FieldOrder> <IsRequired>false</IsRequired> <Name>ImageUrl</Name> <IsModified>false</IsModified> <ParentPageID>3</ParentPageID> <Type>String</Type> <Value xsi:type="xsd:string">smarter.jpg</Value> </LitePropertyData> <LitePropertyData> <Description>WebItemApplicationEnum</Description> <DisplayEditUI>true</DisplayEditUI> <OwnerTab>1</OwnerTab> <DisplayName>WebItemApplicationEnum</DisplayName> <FieldOrder>1</FieldOrder> <IsRequired>false</IsRequired> <Name>WebItemApplicationEnum</Name> <IsModified>false</IsModified> <ParentPageID>3</ParentPageID> <Type>Number</Type> <Value xsi:type="xsd:string">1</Value> </LitePropertyData> </Properties> <Seo> <Author>Phil Carney</Author> <Classification /> <Copyright>Carnotaurus</Copyright> <Description> What is the purpose of this option? This option checks the current document for accessibility issues. It uses Bobby to provide details of whether the current web page conforms to W3C's WCAG criteria for web content accessibility. Issues with Bobby and Cynthia Bobby and Cynthia are free services that supposedly allow a user to expose web page accessibility barriers. It is something of a guide but perhaps a blunt instrument. I tested a few of the webpages that I have designed. Sure enough, my pages fall short and for good reason. I am not about to claim that Bobby and Cynthia are useless. Although it is useful and commendable tool, it project appears to be overly ambitious. Nevertheless, let me explain my issues with Bobby and Cynthia: First, certain W3C standards for designing web documents are often too strict and unworkable. For instance, in some versions W3C standards for HTML, certain tags should not include a particular attribute, whereas in others they are requisite if the document is to be ???well-formed???. The standard that a designer chooses is determined usually by the requirements specification document. This specifies which browsers and versions of those browsers that the web page is expected to correctly display. Forcing a hypertext document to conform strictly to a specific W3C standard for HTML is often no simple task. In the worst case, it cannot conform without losing some aesthetics or accessibility functionality. Second, the case of HTML documents is not an isolated case. Standards for XML, XSL, JavaScript, VBScript, are analogous. Therefore, you might imagine the problems when you begin to combine these languages and formats in an HTML document. Third, there is always more than one way to skin a cat. For example, Bobby and Cynthia may flag those IMG tags that do not contain a TITLE attribute. There might be good reason that a web developer chooses not to include the title attribute. The title attribute has a limited numbers of characters and does not support carriage returns. This is a major defect in the design of this tag. In fact, before the TITLE attribute was supported, there was the ALT attribute. Most browsers support both, yet they both perform a similar function. However, both attributes share the same deficiencies. In practice, there are instances where neither attribute would be used. Instead, for example, the developer would write some JavaScript or VBScript to circumvent these deficiencies. The concern is that Bobby and Cynthia would not notice this because it does not ???understand??? what the JavaScript does. </Description> <Keywords>unused</Keywords> <Title>unused</Title> </Seo> </row> </rows> </root> EDIT Here are my entities: public class LitePropertyData { public virtual string Description { get; set; } public virtual bool DisplayEditUI { get; set; } public int OwnerTab { get; set; } public virtual string DisplayName { get; set; } public int FieldOrder { get; set; } public bool IsRequired { get; set; } public string Name { get; set; } public virtual bool IsModified { get; set; } public virtual int ParentPageID { get; set; } public LiteDataType Type { get; set; } public object Value { get; set; } } [Serializable] public class LitePageData { public String Guid { get; set; } public Int32 ID { get; set; } public String Name { get; set; } public Int32? ParentID { get; set; } public DateTime Created { get; set; } public String CreatedBy { get; set; } public DateTime Changed { get; set; } public String ChangedBy { get; set; } public Int32? LitePageTypeID { get; set; } public String Html { get; set; } public String FriendlyName { get; set; } public Boolean IsDeleted { get; set; } public List<LitePropertyData> Properties { get; set; } public LiteSeoPageData Seo { get; set; } /// <summary> /// Saves the specified XML full file path. /// </summary> /// <param name="xmlFullFilePath">The XML full file path.</param> public void Save(String xmlFullFilePath) { XDocument doc = XDocument.Load(xmlFullFilePath); XElement demoNode = this.ToXElement<LitePageData>(); demoNode.Name = "row"; doc.Descendants("rows").Single().Add(demoNode); doc.Save(xmlFullFilePath); } }

Read the article
Coping with infrastructure upgrades

- by Fatherjack

A common topic for questions on SQL Server forums is how to plan and implement upgrades to SQL Server. Moving from old to new hardware or moving from one version of SQL Server to another. There are other circumstances where upgrades of other systems affect SQL Server DBAs. For example, where I work at the moment there is an Microsoft Exchange (email) server upgrade in progress. It it being handled by a different team so I’m not wholly sure on the details but we are in a situation where there are currently 2 Exchange email servers – the old one and the new one. Users mail boxes are being transferred in a planned process but as we approach the old server being turned off we have to also make sure that our SQL Servers get updated to use the new SMTP server for all of the SQL Agent notifications, SSIS packages etc. My servers have a number of profiles so that various jobs can send emails on behalf of various departments and different systems. This means there are lots of places that the old server name needs to be replaced by the new one. Anyone who has set up DBMail and enjoyed the click-tastic odyssey of screens to create Profiles and Accounts and so on and so forth ought to seek some professional help in my opinion. It’s a nightmare of back and forth settings changes and it stinks. I wasn’t looking forward to heading into this mess of a UI and changing the old Exchange server name for the new one on all my SQL Instances for all of the accounts I have set up. So I did what any Englishmen with a shed would do, I decided to take it apart and see if I can fix it another way. I took a guess that we are going to be working in MSDB and Books OnLine was remarkably helpful and amongst a lot of information told me about a couple of procedures that can be used to interrogate DBMail settings. USE [msdb] -- It's where all the good stuff is kept GO EXEC dbo.sysmail_help_profile_sp; EXEC dbo.sysmail_help_account_sp; Both of these procedures take optional parameters with the same name – ID and Name. If you provide an ID or a name then the results you get back are for that specific Profile or Account. Otherwise you get details of all Profiles and Accounts on the server you are connected to. As you can see (click for a bigger image), the Account has the SMTP server information in the servername column. We want to change that value to NewSMTP.Contoso.com. Now it appears that the procedure we are looking at gets it’s data from the sysmail_account and sysmail_server tables, you can get the results the stored procedure provides if you run the code below. SELECT [account_id] , [name] , [description] , [email_address] , [display_name] , [replyto_address] , [last_mod_datetime] , [last_mod_user] FROM dbo.sysmail_account AS sa; SELECT [account_id] , [servertype] , [servername] , [port] , [username] , [credential_id] , [use_default_credentials] , [enable_ssl] , [flags] , [last_mod_datetime] , [last_mod_user] , [timeout] FROM dbo.sysmail_server AS sms Now, we have no real idea how these tables are linked and whether making an update direct to one or other of them is going to do what we want or whether it will entirely cripple our ability to send email from SQL Server so we wont touch those tables with any UPDATE TSQL. So, back to Books OnLine then and we find sysmail_update_account_sp. It’s exactly what we need. The examples in BOL take the form (as below) of having every parameter explicitly defined. Not wanting to totally obliterate the existing values by not passing values in all of the parameters I set to writing some code to gather the existing data from the tables and re-write the SMTP server name and then execute the resulting TSQL. IF OBJECT_ID('tempdb..#sysmailprofiles') IS NOT NULL DROP TABLE #sysmailprofiles GO CREATE TABLE #sysmailprofiles ( account_id INT , [name] VARCHAR(50) , [description] VARCHAR(500) , email_address VARCHAR(500) , display_name VARCHAR(500) , replyto_address VARCHAR(500) , servertype VARCHAR(10) , servername VARCHAR(100) , port INT , username VARCHAR(100) , use_default_credentials VARCHAR(1) , ENABLE_ssl VARCHAR(1) ) INSERT [#sysmailprofiles] ( [account_id] , [name] , [description] , [email_address] , [display_name] , [replyto_address] , [servertype] , [servername] , [port] , [username] , [use_default_credentials] , [ENABLE_ssl] ) EXEC [dbo].[sysmail_help_account_sp] DECLARE @TSQL NVARCHAR(1000) SELECT TOP 1 @TSQL = 'EXEC [dbo].[sysmail_update_account_sp] @account_id = ' + CAST([s].[account_id] AS VARCHAR(20)) + ', @account_name = ''' + [s].[name] + '''' + ', @email_address = N''' + [s].[email_address] + '''' + ', @display_name = N''' + [s].[display_name] + '''' + ', @replyto_address = N''' + s.replyto_address + '''' + ', @description = N''' + [s].[description] + '''' + ', @mailserver_name = ''NEWSMTP.contoso.com''' + +', @mailserver_type = ' + [s].[servertype] + ', @port = ' + CAST([s].[port] AS VARCHAR(20)) + ', @username = ' + COALESCE([s].[username], '''''') + ', @use_default_credentials =' + CAST(s.[use_default_credentials] AS VARCHAR(1)) + ', @enable_ssl =' + [s].[ENABLE_ssl] FROM [#sysmailprofiles] AS s WHERE [s].[servername] = 'SMTP.Contoso.com' SELECT @tsql EXEC [sys].[sp_executesql] @tsql This worked well for me and testing the email function EXEC dbo.sp_send_dbmail afterwards showed that the settings were indeed using our new Exchange server. It was only later in writing this blog that I tried running the sysmail_update_account_sp procedure with only the SMTP server name parameter value specified. Despite what Books OnLine might intimate, you can do this and only the values for parameters specified get changed. If a parameter is not specified in the execution of the procedure then the values remain unchanged. This renders most of the above script unnecessary as I could have simply specified the account_id that I want to amend and the new value for the parameter I want to update. EXEC sysmail_update_account_sp @account_id = 1, @mailserver_name = 'NEWSMTP.Contoso.com' This wasn’t going to be the main reason for this post, it was meant to describe how to capture values from a stored procedure and use them in dynamic TSQL but instead we are here and (re)learning the fact that Books Online is a little flawed in places. It is a fantastic resource for anyone working with SQL Server but the reader must adopt an enquiring frame of mind and use a little curiosity to try simple variations on examples to fully understand the code you are working with. I think the author(s) of this part of Books OnLine missed an opportunity to include a third example that had fewer than all parameters specified to give a lead to this method existing.

Read the article
Maximize Performance and Availability with Oracle Data Integration

- by Tanu Sood

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-fareast-font-family:Calibri; mso-bidi-font-family:"Times New Roman";} Alert: Oracle is hosting the 12c Launch Webcast for Oracle Data Integration and Oracle Golden Gate on Tuesday, November 12 (tomorrow) to discuss the new capabilities in detail and share customer perspectives. Hear directly from customer experts and executives from SolarWorld Industries America, British Telecom and Rittman Mead and get your questions answered live by product experts. Register for this complimentary webcast today and join in the discussion tomorrow. Author: Irem Radzik, Senior Principal Product Director, Oracle Organizations that want to use IT as a strategic point of differentiation prefer Oracle’s complete application offering to drive better business performance and optimize their IT investments. These enterprise applications are in the center of business operations and they contain critical data that needs to be accessed continuously, as well as analyzed and acted upon in a timely manner. These systems also need to operate with high-performance and availability, which means analytical functions should not degrade applications performance, and even system maintenance and upgrades should not interrupt availability. Oracle’s data integration products, Oracle Data Integrator, Oracle GoldenGate, and Oracle Enterprise Data Quality, provide the core foundation for bringing data from various business-critical systems to gain a broader, unified view. As a more advance offering to 3rd party products, Oracle’s data integration products facilitate real-time reporting for Oracle Applications without impacting application performance, and provide ability to upgrade and maintain the system without taking downtime. Oracle GoldenGate is certified for Oracle Applications, including E-Business Suite, Siebel CRM, PeopleSoft, and JD Edwards, for moving transactional data in real-time to a dedicated operational reporting environment. This solution allows the app users to offload the resource-heavy queries to the reporting instance(s), reducing CPU utilization, improving OLTP performance, and extending the lifetime of existing IT assets. In addition, having a dedicated reporting instance with up-to-the-second transactional data allows optimizing the reporting environment and even decreasing costs as GoldenGate can move only the required data from expensive mainframe environments to cost-efficient open system platforms. With real-time data replication capabilities GoldenGate is also certified to enable application upgrades and database/hardware/OS migration without impacting business operations. GoldenGate is certified for Siebel CRM, Communications Billing and Revenue Management and JD Edwards for supporting zero downtime upgrades to the latest app version. GoldenGate synchronizes a parallel, upgraded system with the old version in real time, thus enables continuous operations during the process. Oracle GoldenGate is also certified for minimal downtime database migrations for Oracle E-Business Suite and other key applications. GoldenGate’s solution also minimizes the risk by offering a failback option after the switchover to the new environment. Furthermore, Oracle GoldenGate’s bidirectional active-active data replication is certified for Oracle ATG Web Commerce to enable geographically load balancing and high availability for ATG customers. For enabling better business insight, Oracle Data Integration products power Oracle BI Applications with high performance bulk and real-time data integration. Oracle Data Integrator (ODI) is embedded in Oracle BI Applications version 11.1.1.7.1 and helps to integrate data end-to-end across the full BI Applications architecture, supporting capabilities such as data-lineage, which helps business users identify report-to-source capabilities. ODI is integrated with Oracle GoldenGate and provides Oracle BI Applications customers the option to use real-time transactional data in analytics, and do so non-intrusively. By using Oracle GoldenGate with the latest release of Oracle BI Applications, organizations not only leverage fresh data in analytics, but also eliminate the need for an ETL batch window and minimize the impact on OLTP systems. You can learn more about Oracle Data Integration products latest 12c version in our upcoming launch webcast and access the app-specific free resources in the new Data Integration for Oracle Applications Resource Center.

Read the article
Basic WCF Unit Testing

- by Brian

Coming from someone who loves the KISS method, I was surprised to find that I was making something entirely too complicated. I know, shocker right? Now I'm no unit testing ninja, and not really a WCF ninja either, but had a desire to test service calls without a) going to a database, or b) making sure that the entire WCF infrastructure was tip top. Who does? It's not the environment I want to test, just the logic I’ve written to ensure there aren't any side effects. So, for the K.I.S.S. method: Assuming that you're using a WCF service library (you are using service libraries correct?), it's really as easy as referencing the service library, then building out some stubs for bunking up data. The service contract We’ll use a very basic service contract, just for getting and updating an entity. I’ve used the default “CompositeType” that is in the template, handy only for examples like this. I’ve added an Id property and overridden ToString and Equals. [ServiceContract] public interface IMyService { [OperationContract] CompositeType GetCompositeType(int id); [OperationContract] CompositeType SaveCompositeType(CompositeType item); [OperationContract] CompositeTypeCollection GetAllCompositeTypes(); } The implementation When I implement the service, I want to be able to send known data into it so I don’t have to fuss around with database access or the like. To do this, I first have to create an interface for my data access: public interface IMyServiceDataManager { CompositeType GetCompositeType(int id); CompositeType SaveCompositeType(CompositeType item); CompositeTypeCollection GetAllCompositeTypes(); } For the purposes of this we can ignore our implementation of the IMyServiceDataManager interface inside of the service. Pretend it uses LINQ to Entities to map its data, or maybe it goes old school and uses EntLib to talk to SQL. Maybe it talks to a tape spool on a mainframe on the third floor. It really doesn’t matter. That’s the point. So here’s what our service looks like in its most basic form: public CompositeType GetCompositeType(int id) { //sanity checks if (id == 0) throw new ArgumentException("id cannot be zero."); return _dataManager.GetCompositeType(id); } public CompositeType SaveCompositeType(CompositeType item) { return _dataManager.SaveCompositeType(item); } public CompositeTypeCollection GetAllCompositeTypes() { return _dataManager.GetAllCompositeTypes(); } But what about the datamanager? The constructor takes care of that. I don’t want to expose any testing ability in release (or the ability for someone to swap out my datamanager) so this is what we get: IMyServiceDataManager _dataManager; public MyService() { _dataManager = new MyServiceDataManager(); } #if DEBUG public MyService(IMyServiceDataManager dataManager) { _dataManager = dataManager; } #endif The Stub Now it’s time for the rubber to meet the road… Like most guys that ever talk about unit testing here’s a sample that is painting in *very* broad strokes. The important part however is that within the test project, I’ve created a bunk (unit testing purists would say stub I believe) object that implements my IMyServiceDataManager so that I can deal with known data. Here it is: internal class FakeMyServiceDataManager : IMyServiceDataManager { internal FakeMyServiceDataManager() { Collection = new CompositeTypeCollection(); Collection.AddRange(new CompositeTypeCollection { new CompositeType { Id = 1, BoolValue = true, StringValue = "foo 1", }, new CompositeType { Id = 2, BoolValue = false, StringValue = "foo 2", }, new CompositeType { Id = 3, BoolValue = true, StringValue = "foo 3", }, }); } CompositeTypeCollection Collection { get; set; } #region IMyServiceDataManager Members public CompositeType GetCompositeType(int id) { if (id <= 0) return null; return Collection.SingleOrDefault(m => m.Id == id); } public CompositeType SaveCompositeType(CompositeType item) { var existing = Collection.SingleOrDefault(m => m.Id == item.Id); if (null != existing) { Collection.Remove(existing); } if (item.Id == 0) { item.Id = Collection.Count > 0 ? Collection.Max(m => m.Id) + 1 : 1; } Collection.Add(item); return item; } public CompositeTypeCollection GetAllCompositeTypes() { return Collection; } #endregion } So it’s tough to see in this example why any of this is necessary, but in a real world application you would/should/could be applying much more logic within your service implementation. This all serves to ensure that between refactorings etc, that it doesn’t send sparking cogs all about or let the blue smoke out. Here’s a simple test that brings it all home, remember, broad strokes: [TestMethod] public void MyService_GetCompositeType_ExpectedValues() { FakeMyServiceDataManager fake = new FakeMyServiceDataManager(); MyService service = new MyService(fake); CompositeType expected = fake.GetCompositeType(1); CompositeType actual = service.GetCompositeType(2); Assert.AreEqual<CompositeType>(expected, actual, "Objects are not equal. Expected: {0}; Actual: {1};", expected, actual); } Summary That’s really all there is to it. You could use software x or framework y to do the exact same thing, but in my case I just didn’t really feel like it. This speaks volumes to my not yet ninja unit testing prowess.

Read the article
Scripting custom drawing in Delphi application with IF/THEN/ELSE statements?

- by Jerry Dodge

I'm building a Delphi application which displays a blueprint of a building, including doors, windows, wiring, lighting, outlets, switches, etc. I have implemented a very lightweight script of my own to call drawing commands to the canvas, which is loaded from a database. For example, one command is ELP 1110,1110,1290,1290,3,8388608 which draws an ellipse, parameters are 1110x1110 to 1290x1290 with pen width of 3 and the color 8388608 converted from an integer to a TColor. What I'm now doing is implementing objects with common drawing routines, and I'd like to use my scripting engine, but this calls for IF/THEN/ELSE statements and such. For example, when I'm drawing a light, if the light is turned on, I'd like to draw it yellow, but if it's off, I'd like to draw it gray. My current scripting engine has no recognition of such statements. It just accepts simple drawing commands which correspond with TCanvas methods. Here's the procedure I've developed (incomplete) for executing a drawing command on a canvas: function DrawCommand(const Cmd: String; var Canvas: TCanvas): Boolean; type TSingleArray = array of Single; var Br: TBrush; Pn: TPen; X: Integer; P: Integer; L: String; Inst: String; T: String; Nums: TSingleArray; begin Result:= False; Br:= Canvas.Brush; Pn:= Canvas.Pen; if Assigned(Canvas) then begin if Length(Cmd) > 5 then begin L:= UpperCase(Cmd); if Pos(' ', L)> 0 then begin Inst:= Copy(L, 1, Pos(' ', L) - 1); Delete(L, 1, Pos(' ', L)); L:= L + ','; SetLength(Nums, 0); X:= 0; while Pos(',', L) > 0 do begin P:= Pos(',', L); T:= Copy(L, 1, P - 1); Delete(L, 1, P); SetLength(Nums, X + 1); Nums[X]:= StrToFloatDef(T, 0); Inc(X); end; Br.Style:= bsClear; Pn.Style:= psSolid; Pn.Color:= clBlack; if Inst = 'LIN' then begin Pn.Width:= Trunc(Nums[4]); if Length(Nums) > 5 then begin Br.Style:= bsSolid; Br.Color:= Trunc(Nums[5]); end; Canvas.MoveTo(Trunc(Nums[0]), Trunc(Nums[1])); Canvas.LineTo(Trunc(Nums[2]), Trunc(Nums[3])); Result:= True; end else if Inst = 'ELP' then begin Pn.Width:= Trunc(Nums[4]); if Length(Nums) > 5 then begin Br.Style:= bsSolid; Br.Color:= Trunc(Nums[5]); end; Canvas.Ellipse(Trunc(Nums[0]),Trunc(Nums[1]),Trunc(Nums[2]),Trunc(Nums[3])); Result:= True; end else if Inst = 'ARC' then begin Pn.Width:= Trunc(Nums[8]); Canvas.Arc(Trunc(Nums[0]),Trunc(Nums[1]),Trunc(Nums[2]),Trunc(Nums[3]), Trunc(Nums[4]),Trunc(Nums[5]),Trunc(Nums[6]),Trunc(Nums[7])); Result:= True; end else if Inst = 'TXT' then begin Canvas.Font.Size:= Trunc(Nums[2]); Br.Style:= bsClear; Pn.Style:= psSolid; T:= Cmd; Delete(T, 1, Pos(' ', T)); Delete(T, 1, Pos(',', T)); Delete(T, 1, Pos(',', T)); Delete(T, 1, Pos(',', T)); Canvas.TextOut(Trunc(Nums[0]), Trunc(Nums[1]), T); Result:= True; end; end else begin //No space found, not a valid command end; end; end; end; What I'd like to know is what's a good lightweight third-party scripting engine I could use to accomplish this? I would hate to implement parsing of IF, THEN, ELSE, END, IFELSE, IFEND, and all those necessary commands. I need simply the ability to tell the scripting engine if certain properties meet certain conditions, it needs to draw the object a certain way. The light example above is only one scenario, but the same solution needs to also be applicable to other scenarios, such as a door being open or closed, locked or unlocked, and draw it a different way accordingly. This needs to be implemented in the object script drawing level. I can't hard-code any of these scripting/drawing rules, the drawing needs to be controlled based on the current state of the object, and I may also wish to draw a light a certain shade or darkness depending on how dimmed the light is.

Read the article
JavaOne 2012 Sunday Strategy Keynote

- by Janice J. Heiss

At the Sunday Strategy Keynote, held at the Masonic Auditorium, Hasan Rizvi, EVP, Middleware and Java Development, stated that the theme for this year's JavaOne is: “Make the future Java”-- meaning that Java continues in its role as the most popular, complete, productive, secure, and innovative development platform. But it also means, he qualified, the process by which we make the future Java -- an open, transparent, collaborative, and community-driven evolution. "Many of you have bet your businesses and your careers on Java, and we have bet our business on Java," he said.Rizvi detailed the three factors they consider critical to the success of Java--technology innovation, community participation, and Oracle's leadership/stewardship. He offered a scorecard in these three realms over the past year--with OS X and Linux ARM support on Java SE, open sourcing of JavaFX by the end of the year, the release of Java Embedded Suite 7.0 middleware platform, and multiple releases on the Java EE side. The JCP process continues, with new JSR activity, and JUGs show a 25% increase in participation since last year. Oracle, meanwhile, continues its commitment to both technology and community development/outreach--with four regional JavaOne conferences last year in various part of the world, as well as the release of Java Magazine, with over 120,000 current subscribers. Georges Saab, VP Development, Java SE, next reviewed features of Java SE 7--the first major revision to the platform under Oracle's stewardship, which has included near-monthly update releases offering hundreds of fixes, performance enhancements, and new features. Saab indicated that developers, ISVs, and hosting providers have all been rapid adopters of the platform. He also noted that Oracle's entire Fusion middleware stack is supported on SE 7. The supported platforms for SE 7 has also increased--from Windows, Linux, and Solaris, to OS X, Linux ARM, and the emerging ARM micro-server market. "In the last year, we've added as many new platforms for Java, as were added in the previous decade," said Saab.Saab also explored the upcoming JDK 8 release--including Project Lambda, Project Nashorn (a modern implementation of JavaScript running on the JVM), and others. He noted that Nashorn functionality had already been used internally in NetBeans 7.3, and announced that they were planning to contribute the implementation to OpenJDK. Nandini Ramani, VP Development, Java Client, ME and Card, discussed the latest news pertaining to JavaFX 2.0--releases on Windows, OS X, and Linux, release of the FX Scene Builder tool, the JavaFX WebView component in NetBeans 7.3, and an OpenJFX project in OpenJDK. Nandini announced, as of Sunday, the availability for download of JavaFX on Linux ARM (developer preview), as well as Scene Builder on Linux. She noted that for next year's JDK 8 release, JavaFX will offer 3D, as well as third-party component integration. Avinder Brar, Senior Software Engineer, Navis, and Dierk König, Canoo Fellow, next took the stage and demonstrated all that JavaFX offers, with a feature-rich, animation-rich, real-time cargo management application that employs Canoo's just open-sourced Dolphin technology.Saab also explored Java SE 9 and beyond--Jigsaw modularity, Penrose Project for interoperability with OSGi, improved multi-tenancy for Java in the cloud, and Project Sumatra. Phil Rogers, HSA Foundation President and AMD Corporate Fellow, explored heterogeneous computing platforms that combine the CPU and the parallel processor of the GPU into a single piece of silicon and shared memory—a hardware technology driven by such advanced functionalities as HD video, face recognition, and cloud workloads. Project Sumatra is an OpenJDK project targeted at bringing Java to such heterogeneous platforms--with hardware and software experts working together to modify the JVM for these advanced applications and platforms.Ramani next discussed the latest with Java in the embedded space--"the Internet of things" and M2M--declaring this to be "the next IT revolution," with Java as the ideal technology for the ecosystem. Last week, Oracle released Java ME Embedded 3.2 (for micro-contollers and low-power devices), and Java Embedded Suite 7.0 (a middleware stack based on Java SE 7). Axel Hansmann, VP Strategy and Marketing, Cinterion, explored his company's use of Java in M2M, and their new release of EHS5, the world's smallest 3G-capable M2M module, running Java ME Embedded. Hansmaan explained that Java offers them the ability to create a "simple to use, scalable, coherent, end-to-end layer" for such diverse edge devices.Marc Brule, Chief Financial Office, Royal Canadian Mint, also explored the fascinating use-case of JavaCard in his country's MintChip e-cash technology--deployable on smartphones, USB device, computer, tablet, or cloud. In parting, Ramani encouraged developers to download the latest releases of Java Embedded, and try them out.Cameron Purdy, VP, Fusion Middleware Development and Java EE, summarized the latest developments and announcements in the Enterprise space--greater developer productivity in Java EE6 (with more on the way in EE 7), portability between platforms, vendors, and even cloud-to-cloud portability. The earliest version of the Java EE 7 SDK is now available for download--in GlassFish 4--with WebSocket support, better JSON support, and more. The final release is scheduled for April of 2013. Nicole Otto, Senior Director, Consumer Digital Technology, Nike, explored her company's Java technology driven enterprise ecosystem for all things sports, including the NikeFuel accelerometer wrist band. Looking beyond Java EE 7, Purdy mentioned NoSQL database functionality for EE 8, the concurrency utilities (possibly in EE 7), some of the Avatar projects in EE 7, some in EE 8, multi-tenancy for the cloud, supporting SaaS applications, and more.Rizvi ended by introducing Dr. Robert Ballard, oceanographer and National Geographic Explorer in Residence--part of Oracle's philanthropic relationship with the National Geographic Society to fund K-12 education around ocean science and conservation. Ballard is best known for having discovered the wreckage of the Titanic. He offered a fascinating video and overview of the cutting edge technology used in such deep-sea explorations, noting that in his early days, high-bandwidth exploration meant that you’d go down in a submarine and "stick your face up against the window." Now, it's a remotely operated, technology telepresence--"I think of my Hercules vehicle as my equivalent of a Na'vi. When I go beneath the sea, I actually send my spirit." Using high bandwidth satellite links, such amazing explorations can now occur via smartphone, laptop, or whatever platform. Ballard’s team regularly offers live feeds and programming out to schools and the world, spanning 188 countries--with embedding educators as part of the expeditions. It's technology at its finest, inspiring the next-generation of scientists and explorers!

Read the article
[Windows 8] An application bar toggle button

- by Benjamin Roux

To stay in the application bar stuff, here’s another useful control which enable to create an application bar button that can be toggled between two different contents/styles/commands (used to create a favorite/unfavorite or a play/pause button for example). namespace Indeed.Controls { public class AppBarToggleButton : Button { public bool IsChecked { get { return (bool)GetValue(IsCheckedProperty); } set { SetValue(IsCheckedProperty, value); } } public static readonly DependencyProperty IsCheckedProperty = DependencyProperty.Register("IsChecked", typeof(bool), typeof(AppBarToggleButton), new PropertyMetadata(false, (o, e) => (o as AppBarToggleButton).IsCheckedChanged())); public string CheckedContent { get { return (string)GetValue(CheckedContentProperty); } set { SetValue(CheckedContentProperty, value); } } public static readonly DependencyProperty CheckedContentProperty = DependencyProperty.Register("CheckedContent", typeof(string), typeof(AppBarToggleButton), null); public ICommand CheckedCommand { get { return (ICommand)GetValue(CheckedCommandProperty); } set { SetValue(CheckedCommandProperty, value); } } public static readonly DependencyProperty CheckedCommandProperty = DependencyProperty.Register("CheckedCommand", typeof(ICommand), typeof(AppBarToggleButton), null); public Style CheckedStyle { get { return (Style)GetValue(CheckedStyleProperty); } set { SetValue(CheckedStyleProperty, value); } } public static readonly DependencyProperty CheckedStyleProperty = DependencyProperty.Register("CheckedStyle", typeof(Style), typeof(AppBarToggleButton), null); public bool AutoToggle { get { return (bool)GetValue(AutoToggleProperty); } set { SetValue(AutoToggleProperty, value); } } public static readonly DependencyProperty AutoToggleProperty = DependencyProperty.Register("AutoToggle", typeof(bool), typeof(AppBarToggleButton), null); private object content; private ICommand command; private Style style; private void IsCheckedChanged() { if (IsChecked) { // backup the current content and command content = Content; command = Command; style = Style; if (CheckedStyle == null) Content = CheckedContent; else Style = CheckedStyle; Command = CheckedCommand; } else { if (CheckedStyle == null) Content = content; else Style = style; Command = command; } } protected override void OnTapped(Windows.UI.Xaml.Input.TappedRoutedEventArgs e) { base.OnTapped(e); if (AutoToggle) IsChecked = !IsChecked; } } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } To use it, it’s very simple. <ic:AppBarToggleButton Style="{StaticResource PlayAppBarButtonStyle}" CheckedStyle="{StaticResource PauseAppBarButtonStyle}" Command="{Binding Path=PlayCommand}" CheckedCommand="{Binding Path=PauseCommand}" IsChecked="{Binding Path=IsPlaying}" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } When the IsPlaying property (in my ViewModel) is true the button becomes a Pause button, when it’s false it becomes a Play button. Warning: Just make sure that the IsChecked property is set in last in your control !! If you don’t use style you can alternatively use Content and CheckedContent. Furthermore you can set the AutoToggle to true if you don’t want to control is IsChecked property through binding. With this control and the AppBarPopupButton, you can now create awesome application bar for your apps ! Stay tuned for more awesome Windows 8 tricks !

Read the article
Career guidance/advice for Junior-level Software Engineer [closed]

- by John Do

I have quite a few questions on my mind, so please bare with me. Please don't feel obligated to answer all of them, any as you choose will do. I'd appreciate if you could share some insight on any of these. Before I begin, some context: I currently have almost two years of professional experience as a Software Engineer, mainly developing software in Java. At this point, I feel that I have reached the peak in my career growth at the current company I am at and therefore I am looking for a new job, ideally again, as a Software Engineer. I have been interviewing for the past few months casually but have not had luck with companies I have a passion for. So, in no particular order - 1) In general, what are your thoughts on having graduate degrees in CS / Software Engineering. How much does it influence a salary increase, and do you think it's beneficial when working on real-world problems? I get the sense that a graduate degree in the field is trivial unless you really have a passion for research. 2) In general, in professional practice, how often had you have to write your own data structures and "complex" algorithms from scratch? In my own work, I have found myself relying mainly on third-party frameworks and the Java standard library to implement solutions as per business requirements. What are your thoughts on this? 3) In terms of resume, I feel the most ambivalent here. I want to be able to "blemish" my resume to a certain extent so that it stands out from others', but at the same time I do not want to over-exagerate my abilities. How do you strike a balance here? For example: I say that I am proficient in Java with data structures and algorithms. This is obviously a subjective and relative statement. I've taken the classes in my undergrad, and I've applied it in my work experience. What I feel as "prociency" can be seen as junior-level to others. How do you know what to say? Most of the time, recruiters (with no technical background) will be looking for keywords that stand out. This leads me to my next question (4). 4) Just from interviewing for the past few months (and getting plenty of rejections), I've come to realize that I may not be as proficient in data structures and algorithms as I thought I was. Do you think it's a good idea to remove the "proficient in java/data structure and algorithms"? I feel that being too hoenst on the resume will impede me from scoring opportunities to even have an interview with top-notch companies. What are your thoughts? 5) What is the absolute "must-have" knowledge going into a technical interview? I've been practicing several algorithmic and data sturcture problems now, and I feel that my abilities to solve arbitrary problems efficiently has not gotten significantly better. Do you think these abilities are something innate - it's either you have in you, or you don't? How can you teach yourself to learn, if you will? 6) How easy is it to go from industry/function to the next? I work mainly with backend technologies and I'm now interested in working with the frontend, i.e javascript,jquery,php or even mobile development. In your own experience, how did you not get pidgeon holed in your career? I feel that the choices you make now ultimately decide your future. As cliche as it sounds, I think it may be true. Here's what I mean: you've worked mainly as a backend engineer, people are interested in you doing the same thing since you've already accumulated experience in that function. How do get experience in a new function if people won't accept you because you don't already have it? It's a catch 22, you see... Are side projects the only real way to help you move from one function to another that you're truly interested in? For example: I could start writing my own mobile applications, even though I've worked mainly on the backend. Thanks so much for the long read. As a relatively new engineer to the real world, I am very humble and would like those who are experienced to shed some light. Thank you so much.

Read the article
UppercuT v1.0 and 1.1–Linux (Mono), Multi-targeting, SemVer, Nitriq and Obfuscation, oh my!

- by Robz / Fervent Coder

Recently UppercuT (UC) quietly released version 1 (in August). I’m pretty happy with where we are, although I think it’s a few months later than I originally planned. I’m glad I held it back, it gave me some more time to think about some things a little more and also the opportunity to receive a patch for running builds with UC on Linux. We also released v1.1 very recently (December). UppercuT v1 Builds On Linux Perhaps the most significant changes to UC going v1 is that it now supports builds on Linux using Mono! This is thanks mostly to Svein Ackenhausen for the patches and working with me on getting it all working while not breaking the windows builds! This means you can use mono on Windows or Linux. Notice the shell files to execute with Linux that come as part of UC now. Multi-Targeting Perhaps one of the hardest things to do that requires an automated build is multi-targeting. At v1 this is early, and possibly prone to some issues, but available. We believe in making everything stupid simple, so it’s as simple as adding a comma to the microsoft.framework property. i.e. “net-3.5, net-4.0” to suddenly produce both framework builds. When you build, this is what you get (if you meet each framework’s requirements): At this time you have to let UC override the build location (as it does by default) or this will not work. Semantic Versioning By now many of you have been using UppercuT for awhile and have watched how we have done versioning. Many of you who use git already know we put the revision hash in the informational/product version as the last octet. At v1, UppercuT has adopted the semantic versioning scheme. What does that mean? This is a short read, but a good one: http://SemVer.org SemVer (Semantic Versioning) is really using versioning what it was meant for. You have three octets. Major.Minor.Patch as in 1.1.0. UC will use three different versioning concepts, one for the assembly version, one for the file version, and one for the product version. All versions - The first three octects of the version are owned by SemVer. Major.Minor.Patch i.e.: 1.1.0 Assembly Version - The assembly version would much closer follow SemVer. Last digit is always 0. Major.Minor.Patch.0 i.e: 1.1.0.0 File Version - The file version occupies the build number as the last digit. Major.Minor.Patch.Build i.e.: 1.1.0.2650 Product/Informational Version - The last octect of your product/informational version is the source control revision/hash. Major.Minor.Patch.RevisionOrHash i.e. (TFS/SVN): 1.1.0.235 i.e. (Git/HG): 1.1.0.a45ace4346adef0 SemVer is not on by default, the passive versioning scheme is still in effect. Notice that version.use_semanticversioning has been added to the UppercuT.config file (and version.patch in support of the third octet): Gems Support Gems support was added at v1. This will probably be deprecated as some point once there is an announced sunset for Nu v1. Application gems may keep it around since there is no alternative for that yet though (CoApp would be a possible replacement). Nitriq Support Nitriq is a code analysis tool like NDepend. It’s built by Mr. Jon von Gillern. It uses LINQ query language, so you can use a familiar idiom when analyzing your code base. It’s a pretty awesome tool that has a free version for those looking to do code analysis! To use Nitriq with UC, you are going to need the console edition. To take advantage of Nitriq, you just need to update the location of Nitriq in the config: Then add the nitriq project files at the root of your source. Please refer to the Nitriq documentation on how these are created. UppercuT v1.1 Obfuscation One thing I started looking into was an easy way to obfuscate my code. I came across EazFuscator, which is both free and awesome. Plus the GUI for it is super simple to use. How do you make obfuscation even easier? Make it a convention and a configurable property in the UC config file! And the code gets obfuscated! Closing Definitely get out and look at the new release. It contains lots of chocolaty (sp?) goodness. And remember, the upgrade path is almost as simple as drag and drop!

Read the article
JustCode Provides Reflector Alternative

- by Joe Mayo

If you've been a loyal Reflector user, you've probably been exposed to the debacle surrounding RedGate's decision to no longer offer a free version. Since then, the race has begun for a replacement with a provider that would stand by their promises to the community. Mono has an ongoing free alternative, which has been available for a long time. However, other vendors are stepping up to the plate, with their own offerings. If Not Reflector, Then What? One of these vendors is Telerik. In their recent Q1 2011 release of JustCode, Telerik offers a decompilation utility rivaling what we've become accustomed to in Reflector. Not only does Telerik offer a usable replacement, but they've (in my opinion), produced a product that integrates more naturally with visual Studio than any other product ever has. Telerik's decompilation process is so easy that the accompanying demo in this post is blindingly short (except for the presence of verbose narrative). If you want to follow along with this demo, you'll need to have Telerik JustCode installed. If you don't have JustCode yet, you can buy it or download a trial at the Telerik Web site . A Tall Tale; Prove It! With JustCode, you can view code in the .NET Framework or any other 3rd party library (that isn't well obfuscated). This demo depends on LINQ to Twitter, which you can download from CodePlex.com and create a reference or install the package online as described in my previous post on NuGet. Regardless of the method, you'll have a project with a reference to LINQ to Twitter. Use a Console Project if you want to follow along with this demo. Note: If you've created a Console project, remember to ensure that the Target Framework is set to .NET Framework 4. The default is .NET Framework 4 Client Profile, which doesn't work with LINQ to Twitter. You can check by double-clicking the Properties folder on the project and inspecting the Target Framework setting. Next, you'll need to add some code to your program that you want to inspect. Here, I add code to instantiate a TwitterContext, which is like a LINQ to SQL DataContext, but works with Twitter: var l2tCtx = new TwitterContext(); If you're following along add the code above to the Main method, which will look similar to this: using LinqToTwitter; namespace NuGetInstall { class Program { static void Main(string[] args) { var l2tCtx = new TwitterContext(); } } } The code above doesn't really do anything, but it does give something that I can show and demonstrate how JustCode decompilation works. Once the code is in place, click on TwitterContext and press the F12 (Go to Definition) key. As expected, Visual Studio opens a metadata file with prototypes for the TwitterContext class. Here's the result: Opening a metadata file is the normal way that Visual Studio works when navigating to the definition of a type where you don't have the code. The scenario with TwitterContext happens because you don't have the source code to the file. Visual Studio has always done this and you can experiment by selecting any .NET type, i.e. a string type, and observing that Visual Studio opens a metadata file for the .NET String type. The point I'm making here is that JustCode works the way Visual Studio works and you'll see how this can make your job easier. In the previous figure, you only saw prototypes associated with the code. i.e. Notice that the default constructor is empty. Again, this is normal because Visual Studio doesn't have the ability to decompile code. However, that's the purpose of this post; showing you how JustCode fills that gap. To decompile code, right click on TwitterContext in the metadata file and select JustCode Navigate -> Decompile from the context menu. The shortcut keys are Ctrl+1. After a brief pause, accompanied by a progress window, you'll see the metadata expand into full decompiled code. Notice below how the default constructor now has code as opposed to the empty member prototype in the original metadata: And Why is This So Different? Again, the big deal is that Telerik JustCode decompilation works in harmony with the way that Visual Studio works. The navigate to functionality already exists and you can use that, along with a simple context menu option (or shortcut key) to transform prototypes into decompiled code. Telerik is filling the the Reflector/Red Gate gap by providing a supported alternative to decompiling code. Many people, including myself, used Reflector to decompile code when we were stuck with buggy libraries or insufficient documentation. Now we have an alternative that's officially supported by a company with an excellent track record for customer (developer) service, Telerik. Not only that, JustCode has several other IDE productivity tools that make the deal even sweeter. Joe

Read the article
How do I cleanly design a central render/animation loop?

- by mtoast

I'm learning some graphics programming, and am in the midst of my first such project of any substance. But, I am really struggling at the moment with how to architect it cleanly. Let me explain. To display complicated graphics in my current language of choice (JavaScript -- have you heard of it?), you have to draw graphical content onto a <canvas> element. And to do animation, you must clear the <canvas> after every frame (unless you want previous graphics to remain). Thus, most canvas-related JavaScript demos I've seen have a function like this: function render() { clearCanvas(); // draw stuff here requestAnimationFrame(render); } render, as you may surmise, encapsulates the drawing of a single frame. What a single frame contains at a specific point in time, well... that is determined by the program state. So, in order for my program to do its thing, I just need to look at the state, and decide what to render. Right? Right. But that is more complicated than it seems. My program is called "Critter Clicker". In my program, you see several cute critters bouncing around the screen. Clicking on one of them agitates it, making it bounce around even more. There is also a start screen, which says "Click to start!" prior to the critters being displayed. Here are a few of the objects I'm working with in my program: StartScreenView // represents the start screen CritterTubView // represents the area in which the critters live CritterList // a collection of all the critters Critter // a single critter model CritterView // view of a single critter Nothing too egregious with this, I think. Yet, when I set out to flesh out my render function, I get stuck, because everything I write seems utterly ugly and reminiscent of a certain popular Italian dish. Here are a couple of approaches I've attempted, with my internal thought process included, and unrelated bits excluded for clarity. Approach 1: "It's conditions all the way down" // "I'll just write the program as I think it, one frame at a time." if (assetsLoaded) { if (userClickedToStart) { if (critterTubDisplayed) { if (crittersDisplayed) { forEach(crittersList, function(c) { if (c.wasClickedRecently) { c.getAgitated(); } }); } else { displayCritters(); } } else { displayCritterTub(); } } else { displayStartScreen(); } } That's a very much simplified example. Yet even with only a fraction of all the rendering conditions visible, render is already starting to get out of hand. So, I dispense with that and try another idea: Approach 2: Under the Rug // "Each view object shall be responsible for its own rendering. // "I'll pass each object the program state, and each can render itself." startScreen.render(state); critterTub.render(state); critterList.render(state); In this setup, I've essentially just pushed those crazy nested conditions to a deeper level in the code, hiding them from view. In other words, startScreen.render would check state to see if it needed actually to be drawn or not, and take the correct action. But this seems more like it only solves a code-aesthetic problem. The third and final approach I'm considering that I'll share is the idea that I could invent my own "wheel" to take care of this. I'm envisioning a function that takes a data structure that defines what should happen at any given point in the render call -- revealing the conditions and dependencies as a kind of tree. Approach 3: Mad Scientist renderTree({ phases: ['startScreen', 'critterTub', 'endCredits'], dependencies: { startScreen: ['assetsLoaded'], critterTub: ['startScreenClicked'], critterList ['critterTubDisplayed'] // etc. }, exclusions: { startScreen: ['startScreenClicked'], // etc. } }); That seems kind of cool. I'm not exactly sure how it would actually work, but I can see it being a rather nifty way to express things, especially if I flex some of JavaScript's events. In any case, I'm a little bit stumped because I don't see an obvious way to do this. If you couldn't tell, I'm coming to this from the web development world, and finding that doing animation is a bit more exotic than arranging an MVC application for handling simple requests - responses. What is the clean, established solution to this common-I-would-think problem?

Read the article
Silverlight 4 Twitter Client - Part 2

- by Max

We will create a few classes now to help us with storing and retrieving user credentials, so that we don't ask for it every time we want to speak with Twitter for getting some information. Now the class to sorting out the credentials. We will have this class as a static so as to ensure one instance of the same. This class is mainly going to include a getter setter for username and password, a method to check if the user if logged in and another one to log out the user. You can get the code here. Now let us create another class to facilitate easy retrieval from twitter xml format results for any queries we make. This basically involves just creating a getter setter for all the values that you would like to retrieve from the xml document returned. You can get the format of the xml document from here. Here is what I've in my Status.cs data structure class. using System; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Ink; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; namespace MaxTwitter.Classes { public class Status { public Status() {} public string ID { get; set; } public string Text { get; set; } public string Source { get; set; } public string UserID { get; set; } public string UserName { get; set; } } } Now let us looking into implementing the Login.xaml.cs, first thing here is if the user is already logged in, we need to redirect the user to the homepage, this we can accomplish using the event OnNavigatedTo, which is fired when the user navigates to this particular Login page. Here you utilize the navigate to method of NavigationService to goto a different page if the user is already logged in. if (GlobalVariable.isLoggedin()) this.NavigationService.Navigate(new Uri("/Home", UriKind.Relative)); On the submit button click event, add the new event handler, which would save the perform the WebClient request and download the results as xml string. WebRequest.RegisterPrefix("https://", System.Net.Browser.WebRequestCreator.ClientHttp); The following line allows us to create a web client to create a web request to a url and get back the string response. Something that came as a great news with SL 4 for many SL developers. WebClient myService = new WebClient(); myService.AllowReadStreamBuffering = true; myService.UseDefaultCredentials = false; myService.Credentials = new NetworkCredential(TwitterUsername.Text, TwitterPassword.Password); Here in the following line, we add an event that has to be fired once the xml string has been downloaded. Here you can do all your XLINQ stuff. myService.DownloadStringCompleted += new DownloadStringCompletedEventHandler(TimelineRequestCompleted); myService.DownloadStringAsync(new Uri("https://twitter.com/statuses/friends_timeline.xml")); Now let us look at implementing the TimelineRequestCompleted event. Here we are not actually using the string response we get from twitter, I just use it to ensure the user is authenticated successfully and then save the credentials and redirect to home page. public void TimelineRequestCompleted(object sender, System.Net.DownloadStringCompletedEventArgs e) { if (e.Error != null) { MessageBox.Show("This application must be installed first"); } If there is no error, we can save the credentials to reuse it later. else { GlobalVariable.saveCredentials(TwitterUsername.Text, TwitterPassword.Password); this.NavigationService.Navigate(new System.Uri("/Home", UriKind.Relative)); } } Ok so now login page is done. Now the main thing – running this application. This credentials stuff would only work, if the application is run out of the browser. So we need fiddle with a few Silverlioght project settings to enable this. Here is how: Right click on Silverlight > properties then check the "Enable running application out of browser". Then click on Out-Of-Browser settings and check "Require elevated trust…" option. That's it, all done to run. Now press F5 to run the application, fix the errors if any. Then once the application opens up in browser with the login page, right click and choose install. Once you install, it would automatically run and you can login and can see that you are redirected to the Home page. Here are the files that are related to this posts. We will look at implementing the Home page, etc… in the next post. Please post your comments and feedbacks; it would greatly help me in improving my posts! Thanks for your time, catch you soon.

Read the article
Oracle Romania Summer School

- by Maria Sandu

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 What would you say about a Summer School within a corporation where you can learn, play and practice? You might think that this is something usually uncommon for a company and you would be right. However, Oracle’s main value being innovation, we came up with a new project for Romanian students and graduates. We organised Oracle Summer School , offering them the opportunity to develop their soft skills and gain valuable business knowledge and exposure. How was Oracle Summer School programme organised? We focused on students and graduates’ needs and combined business experience with training and practice. The twenty four participants had different backgrounds, being interested in Software, Hardware, Finance, Marketing or other areas. The programme fulfilled each of these needs, bringing them in contact with Specialists and Managers. The first two weeks were dedicated to the company visits, business presentations and networking. The participants got an insight about employees’ activities and projects. Storytelling was also part of the program and people from different departments spent a couple of hours with the participants, sharing their experiences, knowledge and interesting stories. The Recruitment team delivered a training about the job interview skills in order to make the participants feel better prepared for a Recruitment process. The second module consisted of two weeks of Soft Skills trainings delivered by professional trainers from different departments. The participants gained useful insight on the competencies required within a business environment. The evenings were dedicated to social activities and it not very long until they started feel part of a team. The third module will take place at the end of September and will put the participants in contact with senior people from the business who will become their Mentors. What do the participants say about Oracle Summer School? “ As a fresh computer science graduate, Oracle Summer School gave me the opportunity of finding what are the technical and nontechnical skills required in a large multinational company. It was a great way of seeing how the theoretical knowledge I received during college is applied in real-life scenarios and what skills I still need to develop. “ (Cosmin Radu) “ When arriving at Oracle I had high expectations, but did not know exactly what was going to unfold because of the program's lack of precedence. Right after the first day, my feedback outgrew the initial forecast and the following weeks continued to build upon it. I had the pleasure to acquaint with brilliant people. The program was outlined on various profiles, delivering a comprehensive experience. It was very engaging, informative and nevertheless fun. “ (Vlad Manciu) „ Oracle Summer School is by far the best summer school that I have ever attended. For me it has been a great experience so far, because I’ve learned not only how to use soft skills in a corporate environment, but I’ve learned a great deal about myself as well. However, the most valuable asset of this 3-week period were the people that I’ve met: great individuals and great professionals, whom I really grew fond of.” (Alexandru Purcarea) “Applying to Oracle Summer School has been the best decision I took in regard to how to spend my summer holiday. I had the chance to do job shadowing at some of the departments I was interested in and I attended great trainings on various subjects such as time management and emotional intelligence. Moreover, I made friends with the other participants and we enjoyed going out together after “classes”.(Andreea Tudor) If you are interested in joining our team and attending our events please follow us on https://campus.oracle.com/campus/HR/emea_main.html /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article
Most Innovative IDM Projects: Awards at OpenWorld

- by Tanu Sood

On Tuesday at Oracle OpenWorld 2012, Oracle recognized the winners of Innovation Awards 2012 at a ceremony presided over by Hasan Rizvi, Executive Vice President at Oracle. Oracle Fusion Middleware Innovation Awards recognize customers for achieving significant business value through innovative uses of Oracle Fusion Middleware offerings. Winners are selected based on the uniqueness of their business case, business benefits, level of impact relative to the size of the organization, complexity and magnitude of implementation, and the originality of architecture. This year’s Award honors customers for their cutting-edge solutions driving business innovation and IT modernization using Oracle Fusion Middleware. The program has grown over the past 6 years, receiving a record number of nominations from customers around the globe. The winners were selected by a panel of judges that ranked each nomination across multiple different scoring categories. Congratulations to both Avea and ETS for winning this year’s Innovation Award for Identity Management. Identity Management Innovation Award 2012 Winner – Avea Company: Founded in 2004, AveA is the sole GSM 1800 mobile operator of Turkey and has reached a nationwide customer base of 12.8 million as of the end of 2011 Region: Turkey (EMEA) Products: Oracle Identity Manager, Oracle Identity Analytics, Oracle Access Management Suite Business Drivers: · To manage the agility and scale required for GSM Operations and enable call center efficiency by enabling agents to change their identity profiles (accounts and entitlements) rapidly based on call load. · Enhance user productivity and call center efficiency with self service password resets · Enforce compliance and audit reporting · Seamless identity management between AveA and parent company Turk Telecom Innovation and Results: · One of the first Sun2Oracle identity management migrations designed for high performance provisioning and trusted reconciliation built with connectors developed on the ICF architecture that provides custom user interfaces for dynamic and rapid management of roles and entitlements along with entitlement level attestation using closed loop remediation between Oracle Identity Manager and Oracle Identity Analytics. · Dramatic reduction in identity administration and call center password reset tasks leading to 20% reduction in administration costs and 95% reduction in password related calls. · Enhanced user productivity by up to 25% to date · Enforced enterprise security and reduced risk · Cost-effective compliance management · Looking to seamlessly integrate with parent and sister companies’ infrastructure securely. Identity Management Innovation Award 2012 Winner – Education Testing Service (ETS) See last year's winners here --Company: ETS is a private nonprofit organization devoted to educational measurement and research, primarily through testing. Region: U.S.A (North America) Products: Oracle Access Manager, Oracle Identity Federation, Oracle Identity Manager Business Drivers: ETS develops and administers more than 50 million achievement and admissions tests each year in more than 180 countries, at more than 9,000 locations worldwide. As the business becomes more globally based, having a robust solution to security and user management issues becomes paramount. The organizations was looking for: · Simplified user experience for over 3000 company users and more than 6 million dynamic student and staff population · Infrastructure and administration cost reduction · Managing security risk by controlling 3rd party access to ETS systems · Enforce compliance and manage audit reporting · Automate on-boarding and decommissioning of user account to improve security, reduce administration costs and enhance user productivity · Improve user experience with simplified sign-on and user self service Innovation and Results: 1. Manage Risk · Centralized system to control user access · Provided secure way of accessing service providers' application using federated SSO. · Provides reporting capability for auditing, governance and compliance. 2. Improve efficiency · Real-Time provisioning to target systems · Centralized provisioning system for user management and access controls. · Enabling user self services. 3. Reduce cost · Re-using common shared services for provisioning, SSO, Access by application reducing development cost and time. · Reducing infrastructure and maintenance cost by decommissioning legacy/redundant IDM services. · Reducing time and effort to implement security functionality in business applications (“onboard” instead of new development). ETS was able to fold in new and evolving requirement in addition to the initial stated goals realizing quick ROI and successfully meeting business objectives. Congratulations to the winners once again. We will be sure to bring you more from these Innovation Award winners over the next few months.

Read the article
Project of Projects with team Foundation Server 2010

- by Martin Hinshelwood

It is pretty much accepted that you should use Areas instead of having many small Team Projects when you are using Team Foundation Server 2010. I have implemented this scenario many times and this is the current iteration of layout and considerations. If like me you work with many customers you will find that you get into a grove for how to set these things up to make them as easily understandable for everyone, while giving the best functionality. The trick is in making it as intuitive as possible for both you and the developers that need to work with it. There are five main places where you need to have the Product or Project name in prominence of any other value. Area Iteration Source Code Work Item Queries Build Once you decide how you are doing this in each of these places you need to keep to it religiously. Evan if you have one source code file to keep, make sure it is in the right place. This makes your developers and others working with the format familiar with where everything should go, as well as building up mussel memory. This prevents the neat system degenerating into a nasty mess. Areas Areas are traditionally used to separate out parts of your product / project so that you can see how much effort has gone into each. Figure: The top level areas are for reporting and work item separation There are massive advantages of using this method. You can: move work from one project to another rename a project / product It is far more likely that a project or product gets renamed than a department. Tip: If you have many projects, over 100, you should consider categorising them here, but make sure that the actual project name always sits at the same level so you know which is which. Figure: Always keep things that are the same at the same level Note: You may use these categories only at the Area/Iteration level to make it easier to select on drop down lists. You may not want to use them everywhere. On the other hand, for consistency it would be better to. Iterations Iterations are usually used to some sort of time based consideration. Here I am splitting into Iterations with periodic releases. Figure: Each product needs to be able to have its own cadence The ability to have each project run at its own pace and to enable them to have their own release schedule is often of paramount importance and you don’t want to fix your 100+ projects to all be released on the same date. Source Code Having a good structure for your source even if you are not branching or having multiple products under the same structure is always a good idea. Figure: Separate out your products source You need to think about both your branches as well as the structure of your source. All your code should be under “Source” and everything you need to build your solution including Build Scripts and 3rd party tools should be under your “Main” (branch) folder. This should them be branched by “Quality”, “Release” or both to get the most out of your branching structure. The important thing is to make sure you branch (or be able to branch) everything you need to build, test and deploy your application to an environment. That environment may be development, test or even production, but I can’t stress the importance of having everything your need. Note: You usually will not be able to install custom software on your build server. Store any *.dll’s or *.exe’s that you need under the “Tools\Tool1” folder. Note: Consult the Branching Guidance for Team Foundation Server 2010 for more on branching Figure: Adding category may be a necessary evil Even if you have to have a couple of categories called “Default”, it is better than not knowing the difference between a folder, Product and Branch. Work Item Queries Queries are used to load lists of Work Items out of TFS so you can see what work you have. This means that you want to also separate queries out by Product / project to make it easier to Figure: Again you have the same first level structure Having Folders also in Work Item Tracking we do the same thing. We put all the queries under a folder named for the Product / Project and change each query to have “AreaPath=[TeamProject]\[ProductX]” in the query instead of the standard “Project=@Project”. Tip: Don’t have a folder with new queries for each iteration. Instead have a single “Current” folder that has queries that point to the current iteration. Just change the queries as you move from one iteration to another. Tip: You can ctrl+drag the “Product1” folder to create your “Product2” folder. Builds You may have many builds both for individual products but also for different quality's. This can be further complicated by having some builds that action “Gated Check-In” and others that are specifically for “Release”, “Test” or another purpose. Figure: There are no folders, yet, for the builds so you need a good naming convention Its a pity that there are no folders under builds, some way to categorise would be nice. In lue of that at the moment you can use a functional naming convention that at least allows you to find what you want. Conclusion It is really easy to both achieve and to stick to this format if you take the time to do it. Unless you have 1000+ builds or 100+ Products you are unlikely run into any issues. Even then there are things you can do to mitigate the issues and I have describes some of them above. Let me know if you can think of any other things to make this easier.

Read the article
Microsoft Forcing Dev/Partners Hands on Win 8 Through Certification

- by D'Arcy Lussier

I remember 2.5 years ago when Microsoft dropped a bomb on the Microsoft Partner community: all Gold competencies would require .NET 4 based premiere certifications (MCPD). Problem was, this gave a window of about 6 months for partners to update their employees’ certifications. At the place I was working, I put together an aggressive plan and we were able to attain the certs needed. Microsoft is always open that the certification requirements will change as the industry changes. .NET 1.0 certifications are useless here in 2012, and rightfully so they’ve been retired for a long time now. But now we’re seeing a new tactic by Microsoft – shifting gears away from certifications that speak to what industry needs and more to the Windows 8 agenda. Consider that currently the premiere development certification is the Microsoft Certified Professional Developer, which comes in three flavours – Web, Windows, and Azure. All require WCF and Data Access exams, as well as one that deals with the associated base technologies (ASP.NET, WinForms/WPF, Azure), and one that ties all three together in a solution-based exam. For Microsoft-based organizations, these skills aren’t just valid but necessary in building Microsoft applications. But the MCPD is being replaced with our old friend Microsoft Certified Solutions Developer (MCSD). So far, Microsoft has only released two types of MCSD – Web and Windows Store Apps. Windows Store Apps?! In a push to move developers to create WinRT-based applications, desktop development is now considered a second-class citizen in the eyes of Redmond. Also interesting are the language options for the exams: HTML5 and C#. Sorry VB folks, its time to embrace curly braces whether they be JavaScript or C#. Consider too the skills being assessed for the Windows Store Apps: Get your MCSD: Windows Store Apps Using HTML5 Get your MCSD: Windows Store Apps Using C# *Image Source: http://www.microsoft.com/learning/en/us/certification/mcsd-windows-store-apps.aspx Nov 21/2012 If you look at the skills being tested in each exam, you’ll find that skills like WCF and Data Access are downplayed compared to things like integrating Charms, facilitating Search, programming for the microphone and camera – all very Windows 8 focussed items. Where this becomes maddening is that Microsoft is still pushing Windows 7 with enterprise clients. According to a ZDNet article, Microsoft wants to see Windows 7 on 70% of enterprise desktops by mid 2013. Assuming they somehow meet that (its a pretty lofty goal), there’s years of traditional desktop-based development that will still be required at some level. For those thinking they’ll just write and stick with the MCPD certification, note that most exams that go towards that certification will be retired at the end of July 2013! (Read the small print). And while details haven’t been finalized, its a safe bet that MCPD certifications eventually won’t count towards Gold-level competencies in the Microsoft Partner program. What this means for Microsoft Partners and Developers is that certification for desktop development is going to be limited to Windows Store Apps unless Microsoft re-introduces a traditional desktop (WPF) based MCSD cert. Web Application Development – It’s Not All Bad There’s big changes on the web side of certification, but I actually see these changes as being for the good! Check out the new exam requirements for MCSD – Web Applications: Get your MCSD: Web Applications certification *Image Source: http://www.microsoft.com/learning/en/us/certification/cert-mcsd-web-applications.aspx Nov 21, 2012 We now *start* with HTML5, JavaScript, and CSS3! Now I’m sure that these will be slanted towards web development in IE, and I can hear designers everywhere bemoaning the CSS/IE combination. Still, I applaud Microsoft for adopting HTML5 as the go-to web technology and requiring certified developers to prove they have skills in the basics of web dev. The fact that the second exam clearly states “MVC Web Applications” shows that Web Forms is truly legacy and deprecated. That’s not to say there aren’t those out there that are still supporting or (for whatever reason) doing new dev with Web Forms, but this move by Microsoft is telling the community they better get on the MVC bandwagon if they want to stay current. Fantastic! And of course Azure needs to be here as well, and this is where the Microsoft agenda fits in. It’s no secret that there’s been a huge push in getting developers on to Azure. I don’t see this as being a bad thing either, as cloud computing (whether Azure, private, or 3rd party) is a necessary skill for developers to have here in 2012. The cynic in me realizes that the HTML5/JavaScript/CSS push wouldn’t be as prominent though if not for the Windows 8 Store App play, where HTML5 is a first class citizen (and an available language for the MCSD Windows Store App cert). In this case, the desktop developers loss is the web developers gain. Get Ready for Changes In addition to the changes in certifications, the Microsoft Partner competencies are going through changes as well. Web and Software Development are being merged into a single competency, meaning that licenses you would have received from having both as Gold are reduced. Other competencies are either being removed or changed, as are the exam requirements. In the same way that we’re seeing faster release cycles from Microsoft, so too will we see the Microsoft Partner Program and MS Certifications evolve faster than ever before. Many of us got caught in the last wave of changes, but this time we can see the wave coming – and it looks pretty big!

Read the article
jQuery with SharePoint solutions

- by KunaalKapoor

For me jQuery is the 'Plan-B' for everything.And most of my projects include the use of jQuery for something or the other, so I decided to write a small note on what works best while using jQuery along with SharePoint.I prefer to use the jQuery JavaScript library, which is far more robust, easier to use, and allows for plugins. Follow the steps below to add jQuery to your master page. For office 365, the prefered location to add jQuery files is the "Site Asserts" library.Deployment Best PracticesThey are only as good as the context it’s being referenced. In other words, take into account your world before applying it.Script your deployment options. Folder in SPD. Use the file system. Make external references. The JQuery library is on the Microsoft Ajax Content Delivery Network. You may even choose to publish to and from the document library. (pros and cons to this approach)Reference options when referencing the script.ScriptLink will make sure it’s loaded at the top of the page and only loaded once. You need Visual Studio or SPDContent Editor Web Part (CEWP). Drop it on the page and it’s there. Easy but dangerousCustom Actions. Great for global deployments of JQuery. Loads it on every page. It also works in Sandbox installations.Deployment Maintenance Dont’sDon’t add scripts directly to your Master Page. That’s way too much effort because the pages are hard to maintain.Don’t add scripts directly to the CEWP. Use a content link instead. That will allow for reuse. If you or someone deletes the CEWP you won’t lose code in the web partSecurity. Any scripts run with the same privileges of the current user. In other words, you can’t get in trouble.Development Best PracticesDon’t abuse the DOM. There are better options to load the DOM without hitting it 1,000 times.User other performance boosters.Try other libraries. Try some custom codeAvoid String conversionMinify your filesUse CAML to reduce number of returns rowsOnly update your JQuery library AFTER RIGOROUS REGRESSION TESTINGCRUD operations can come with some funSP Services wraps SharePoint’s web services for executionThe Bing SDK is pretty easy to use. You can add it to your page with a script, put it into a content editor web part and connect it from the address parameters in a list.Steps:1. Go to jquery.com and download the latest jQuery library to your desktop. You want to get the compressed production version, not the development version.2. Open SharePoint Designer (SPD) and connect to the root level of your site's site collection.In SPD, open the "Style Library" folder. Create a folder named "Scripts" inside of the Style Library. Drag the jQuery library JavaScript file from your desktop into the Scripts folder.In the Scripts folder, create a new JavaScript file and name it (e.g. "actions.js").3. If you are using visual studio add a folder for js, you can create a new folder at the root level or if you prefer more cleaner solutions like me, you can use the layouts folder which cleans out on deactivation/uninstall.4. Within the <head> tag of the master page, add a script reference to the jQuery library just above the content place holder named "PlaceHolderAdditonalPageHead" (and above your custom CSS references, if applicable) as follows:<script src="/Style%20Library/Scripts/{jquery library file}.js" type="text/javascript"></script>Immediately after the jQuery library reference add a script reference to your custom scripts file as follows:<script src="/Style%20Library/Scripts/actions.js" type="text/javascript"></script>Inside your script tag, you can test if jQuery is already defined and if not, then add it to the page.<script type='text/javascript'> if (typeof jQuery == 'undefined') document.write('<scr'+'ipt type="text/javascript" src="http://code.jquery.com/jquery-1.6.1.min.js"></sc'+'ript>');</script>For the inquisitive few... Read on if you'd like :)Why jQuery on SharePoiny is AwesomeIt’s all about that visual wow factor. You can get past that, “But it looks like SharePoint” Take a long list view and put it into JQuery with pagination, etc and you are the hero. It’s also about new controls you get with JQuery that you couldn’t do before.Why jQuery with SharePoint should be AwfulAlthough it’s fairly easy to get jQuery up and running. Copy/Paste can cause a problem. If you don’t understand what it’s doing in the Client Object Model and the Document Object Model then it will do things on your site that were completely unexpected. Many blogs will note workarounds they employed on their sites. Why it’s not working: Debugging “sucks”.You need to develop small blocks of functionality, Test it by putting in some alerts and console.log. Set breakpoints and monitor the DOM via Firebug and some IE development toolsPerformance - It happens all the time. But you should look at the tradeoffs. More time may give you more functionality.Consistency - ”But it works fine on my computer. So test on many browsers. Take into account client resourcesHarm the Farm - You need to code wisely and negatively test. Don’t be the cause of a DoS attack that’s really JQuery asking for a resource over and over and over again. So code wisely. Do negative testing. Monitor Server Resources.They also did a demo where JQuery did an endless loop to pull data from a list. It’s a poor decision but also an easy mistake. They spiked their server resources within a couple seconds and had to shut down the call before it brought it down.ConclusionJQuery is now another tool in your tool kit. You don’t have to use it. Use it where it makes sense and where it helps you get your job done.Don’t abuse it, you will pay for it laterIt will add to page bloat so take that into accountIt can slow your performance

Read the article
Windows for IoT, continued

- by Valter Minute

Originally posted on: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2014/08/05/windows-for-iot-continued.aspxI received many interesting feedbacks on my previous blog post and I tried to find some time to do some additional tests. Bert Kleinschmidt pointed out that pins 2,3 and 10 of the Galileo are connected directly to the SOC, while pin 13, the one used for the sample sketch is controlled via an I2C I/O expander. I changed my code to use pin 2 instead of 13 (just changing the variable assignment at the beginning of the code) and latency was greatly reduced. Now each pulse lasts for 1.44ms, 44% more than the expected time, but ways better that the result we got using pin 13. I also used SetThreadPriority to increase the priority of the thread that was running the sketch to THREAD_PRIORITY_HIGHEST but that didn't change the results. When I was using the I2C-controlled pin I tried the same and the timings got ways worse (increasing more than 10 times) and so I did not commented on that part, wanting to investigate the issua a bit more in detail. It seems that increasing the priority of the application thread impacts negatively the I2C communication. I tried to use also the Linux-based implementation (using a different Galileo board since the one provided by MS seems to use a different firmware) and the results of running the sample blink sketch modified to use pin 2 and blink the led for 1ms are similar to those we got on the same board running Windows. Here the difference between expected time and measured time is worse, getting around 3.2ms instead of 1 (320% compared to 150% using Windows but far from the 100.1% we got with the 8-bit Arduino). Both systems were not under load during the test, maybe loading some applications that use part of the CPU time would make those timings even less reliable, but I think that those numbers are enough to draw some conclusions. It may not be worth running a full OS if what you need is Arduino compatibility. The Arduino UNO is probably the best Arduino you can find to perform this kind of development. The Galileo running the Linux-based stack or running Windows for IoT is targeted to be a platform for "Internet of Things" devices, whatever that means. At the moment I don't see the "I" part of IoT. We have low level interfaces (SPI, I2C, the GPIO pins) that can be used to connect sensors but the support for connectivity is limited and the amount of work required to deliver some data to the cloud (using a secure HTTP request or a message queuing system like APMQS or MQTT) is still big and the rich OS underneath seems to not provide any help doing that.Why should I use sockets and can't access all the high level connectivity features we have on "full" Windows?I know that it's possible to use some third party libraries, try to build them using the Windows For IoT SDK etc. but this means re-inventing the wheel every time and can also lead to some IP concerns if used for products meant to be closed-source. I hope that MS and Intel (and others) will focus less on the "coolness" of running (some) Arduino sketches and more on providing a better platform to people that really want to design devices that leverage internet connectivity and the cloud processing power to deliver better products and services. Providing a reliable set of connectivity services would be a great start. Providing support for .NET would be even better, leaving native code available for hardware access etc. I know that those components may require additional storage and memory etc. So making the OS componentizable (or, at least, provide a way to install additional components) would be a great way to let developers pick the parts of the system they need to develop their solution, knowing that they will integrate well together. I can understand that the Arduino and Raspberry Pi* success may have attracted the attention of marketing departments worldwide and almost any new development board those days is promoted as "XXX response to Arduino" or "YYYY alternative to Raspberry Pi", but this is misleading and prevents companies from focusing on how to deliver good products and how to integrate "IoT" features with their existing offer to provide, at the end, a better product or service to their customers. Marketing is important, but can't decide the key features of a product (the OS) that is going to be used to develop full products for end customers integrating it with hardware and application software. I really like the "hackable" nature of open-source devices and like to see that companies are getting more and more open in releasing information, providing "hackable" devices and supporting developers with documentation, good samples etc. On the other side being able to run a sketch designed for an 8 bit microcontroller on a full-featured application processor may sound cool and an easy upgrade path for people that just experimented with sensors etc. on Arduino but it's not, in my humble opinion, the main path to follow for people who want to deliver real products. *Shameless self-promotion: if you are looking for a good book in Italian about the Raspberry Pi , try mine: http://www.amazon.it/Raspberry-Pi-alluso-Digital-LifeStyle-ebook/dp/B00GYY3OKO

Read the article
Yippy – the F# MVVM Pattern

- by MarkPearl

I did a recent post on implementing WPF with F#. Today I would like to expand on this posting to give a simple implementation of the MVVM pattern in F#. A good read about this topic can also be found on Dean Chalk’s blog although my example of the pattern is possibly simpler. With the MVVM pattern one typically has 3 segments, the view, viewmodel and model. With the beauty of WPF binding one is able to link the state based viewmodel to the view. In my implementation I have kept the same principles. I have a view (MainView.xaml), and and a ViewModel (MainViewModel.fs). What I would really like to illustrate in this posting is the binding between the View and the ViewModel so I am going to jump to that… In Program.fs I have the following code… module Program open System open System.Windows open System.Windows.Controls open System.Windows.Markup open myViewModels // Create the View and bind it to the View Model let myView = Application.LoadComponent(new System.Uri("/FSharpWPF;component/MainView.xaml", System.UriKind.Relative)) :?> Window myView.DataContext <- new MainViewModel() :> obj // Application Entry point [<STAThread>] [<EntryPoint>] let main(_) = (new Application()).Run(myView) You can see that I have simply created the view (myView) and then created an instance of my viewmodel (MainViewModel) and then bound it to the data context with the code… myView.DataContext <- new MainViewModel() :> obj If I have a look at my viewmodel (MainViewModel) it looks like this… module myViewModels open System open System.Windows open System.Windows.Input open System.ComponentModel open ViewModelBase type MainViewModel() = // private variables let mutable _title = "Bound Data to Textbox" // public properties member x.Title with get() = _title and set(v) = _title <- v // public commands member x.MyCommand = new FuncCommand ( (fun d -> true), (fun e -> x.ShowMessage) ) // public methods member public x.ShowMessage = let msg = MessageBox.Show(x.Title) () I have exposed a few things, namely a property called Title that is mutable, a command and a method called ShowMessage that simply pops up a message box when called. If I then look at my view which I have created in xaml (MainView.xaml) it looks as follows… <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="F# WPF MVVM" Height="350" Width="525"> <Grid> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto"/> <RowDefinition Height="*"/> </Grid.RowDefinitions> <TextBox Text="{Binding Path=Title, Mode=TwoWay}" Grid.Row="0"/> <Button Command="{Binding MyCommand}" Grid.Row="1"> <TextBlock Text="Click Me"/> </Button> </Grid> </Window> It is also very simple. It has a button that’s command is bound to the MyCommand and a textbox that has its text bound to the Title property. One other module that I have created is my ViewModelBase. Right now it is used to store my commanding function but I would look to expand on it at a later stage to implement other commonly used functions… module ViewModelBase open System open System.Windows open System.Windows.Input open System.ComponentModel type FuncCommand (canExec:(obj -> bool),doExec:(obj -> unit)) = let cecEvent = new DelegateEvent<EventHandler>() interface ICommand with [<CLIEvent>] member x.CanExecuteChanged = cecEvent.Publish member x.CanExecute arg = canExec(arg) member x.Execute arg = doExec(arg) Put this all together and you have a basic project that implements the MVVM pattern in F#. For me this is quite exciting as it turned out to be a lot simpler to do than I originally thought possible. Also because I have my view in XAML I can use the XAML designer to design forms in F# which I believe is a much cleaner way to go rather than implementing it all in code. Finally if I look at my viewmodel code, it is actually quite clean and compact…

Read the article
What Can We Learn About Software Security by Going to the Gym

- by Nick Harrison

There was a recent rash of car break-ins at the gym. Not an epidemic by any stretch, probably 4 or 5, but still... My gym used to allow you to hang your keys from a peg board at the front desk. This way you could come to the gym dressed to work out, lock your valuables in your car, and not have anything to worry about. Ignorance is bliss. The problem was that anyone who wanted to could go pick up your car keys, click the unlock button and find your car. Once there, they could rummage through your stuff and then walk back in and finish their workout as if nothing had happened. The people doing this were a little smatter then the average thief and would swipe some but not all of your cash leaving everything else in place. Most thieves would steal the whole car and be busted more quickly. The victims were unaware that anything had happened for several days. Fortunately, once the victims realized what had happened, the gym was still able to pull security tapes and find out who was misbehaving. All of the bad guys were busted, and everyone can now breathe a sigh of relieve. It is once again safe to go to the gym. Except there was still a fundamental problem. Putting your keys on a peg board by the front door is just asking for bad things to happen. One person got busted exploiting this security flaw. Others can still be exploiting it. In fact, others may well have been exploiting it and simply never got caught. How long would it take you to realize that $10 was missing from your wallet, if everything else was there? How would you even know when it went missing? Would you go to the front desk and even bother to ask them to review security tapes if you were only missing a small amount. Once highlighted, it is easy to see how commonly such vulnerability may have been exploited. So the gym did the very reasonable precaution of removing the peg board. To me the most shocking part of this story is the resulting uproar from gym members losing the convenient key peg. How dare they remove the trusted peg board? How can I work out now, I have to carry my keys from machine to machine? How can I enjoy my workout with this added inconvenience? This all happened a couple of weeks ago, and some people are still complaining. In light of the recent high profile hacking, there are a couple of parallels that can be drawn. Many web sites are riddled with vulnerabilities are crazy and easily exploitable as leaving your car keys by the front door while you work out. No one ever considered thanking the people who were swiping these keys for pointing out the vulnerability. Without a hesitation, they had their gym memberships revoked and are awaiting prosecution. The gym did recognize the vulnerability for what it is, and closed up that attack vector. What can we learn from this? Monitoring and logging will not prevent a crime but they will allow us to identify that a crime took place and may help track down who did it. Once we find a security weakness, we need to eliminate it. We may never identify and eliminate all security weaknesses, but we cannot allow well known vulnerabilities to persist in our system. In our case, we are not likely to meet resistance from end users. We are more likely to meet resistance from stake holders, product owners, keeper of schedules and budgets. We may meet resistance from integration partners, co workers, and third party vendors. Regardless of the source, we will see resistance, but the weakness needs to be dealt with. There is no need to glorify a cracker for bringing to light a security weakness. Regardless of their claimed motives, they are not heroes. There is also no point in wasting time defending weaknesses once they are identified. Deal with the weakness and move on. In may be embarrassing to find security weaknesses in our systems, but it is even more embarrassing to continue ignoring them. Even if it is unpopular, we need to seek out security weaknesses and eliminate them when we find them. http://www.sans.org has put together the Common Weakness Enumeration http://cwe.mitre.org/ which lists out common weaknesses. The site navigation takes a little getting used to, but there is a treasure trove here. Here is the detail page for SQL Injection. It clearly states how this can be exploited, in case anyone doubts that the weakness should be taken seriously, and more importantly how to mitigate the risk.

Read the article
Problems with my slotgame

- by Raiden2k

I'm coding a slot game for learning. Here's the source code. My questions are below. unit Unit1; {$mode objfpc}{$H+} interface uses Classes, SysUtils, Windows, FileUtil, Forms, Controls, Graphics, Dialogs, StdCtrls, ExtCtrls, ComCtrls, Menus, ActnList, Spin, FileCtrl; type { TForm1 } TForm1 = class(TForm) FloatSpinEdit1: TFloatSpinEdit; Guthabenlb: TLabel; s4: TLabel; s5: TLabel; s6: TLabel; s7: TLabel; s8: TLabel; s9: TLabel; Timer3: TTimer; Winlb: TLabel; Loselb: TLabel; slotbn: TButton; s1: TLabel; s2: TLabel; s3: TLabel; Timer1: TTimer; Timer2: TTimer; procedure FormCreate(Sender: TObject); procedure slotbnClick(Sender: TObject); procedure Timer1Timer(Sender: TObject); procedure Timer2Timer(Sender: TObject); procedure Timer3Timer(Sender: TObject); private { private declarations } FRollen : array [0..2, 0..9] of String; public { public declarations } end; var Form1: TForm1; wins,loses : Integer; guthaben : Double = 10; implementation {$R *.lfm} { TForm1 } procedure TForm1.slotbnClick(Sender: TObject); begin Guthaben := Guthaben - 1.00; Guthabenlb.Caption := FloatToStr(guthaben) + (' €'); Timer1.Enabled := True; Timer2.Enabled := True; slotbn.Enabled := false; end; procedure TForm1.FormCreate(Sender: TObject); var i: integer; j: integer; n: integer; digits: TStringlist; begin Digits := TStringList.Create; try for i := low(FRollen) to high(FRollen) do begin for j := low(FRollen[i]) to high(FRollen[i]) do Digits.Add(IntToStr(j)); for j := low(FRollen[i]) to high(FRollen[i]) do begin n := Random(Digits.Count); FRollen[i, j] := Digits[n]; Digits.Delete(n); end; end finally Digits.Free; end; for i:=low(FRollen) to high(FRollen) do begin end; end; //==================================================================================================\\ // Drehen der Slots im Zufallsmodus //==================================================================================================// procedure TForm1.Timer1Timer(Sender: TObject); begin s1.Caption := IntToStr(Random(9)); s2.Caption := IntToStr(Random(9)); s3.Caption := IntToStr(Random(9)); s4.Caption := IntToStr(Random(9)); s5.Caption := IntToStr(Random(9)); s6.Caption := IntToStr(Random(9)); s7.Caption := IntToStr(Random(9)); s8.Caption := IntToStr(Random(9)); s9.Caption := IntToStr(Random(9)); end; //==================================================================================================// //===================================================================================================\\ // Gewonnen / Verloren abfrage //===================================================================================================// procedure TForm1.Timer2Timer(Sender: TObject); begin Timer1.Enabled := False; Timer2.Enabled := false; if (s1.Caption = s5.Caption) and (s1.Caption = s9.Caption) then begin Guthaben := Guthaben + 5.00; Inc(wins); end else if (s1.Caption = s4.Caption) and (s1.Caption = s7.Caption) then begin Guthaben := Guthaben + 5.00; Inc(wins); end else if (s2.Caption = s5.Caption) and (s2.Caption = s8.Caption) then begin Guthaben := Guthaben + 5.00; Inc(wins); end else if (s3.Caption = s6.Caption) and (s3.Caption = s9.Caption) then begin Guthaben := Guthaben + 5.00; Inc(wins); end else if (s3.Caption = s5.Caption) and (s3.Caption = s7.Caption) then begin Guthaben := Guthaben + 5.00; Inc(wins); end else Inc(loses); slotbn.Enabled := True; Loselb.Caption := 'Loses: ' + IntToStr(loses); Winlb.Caption := 'Wins: ' + IntTostr(Wins); end; procedure TForm1.Timer3Timer(Sender: TObject); begin if (guthaben = 0) or (guthaben < 0) then begin Timer3.Enabled := False; MessageBox(handle,'Du hast verloren!','Verlierer!',MB_OK); close(); end; end; //======================================================================================================\\ end. How can I replace the labels through icons 16 x 16 pixels? How can I adjust the winning sum according to the icons? (for example 3 crowns give you 40 € and 3 apples only 10 €) How can I adjust the winning sum with a sum for every round?

Read the article

Search Results

Search found 12826 results on 514 pages for 'third party controls'.

Page 461/514 | < Previous Page | 457 458 459 460 461 462 463 464 465 466 467 468 | Next Page >

- by C SD

- by martin.abrahams

- by Your DisplayName here!

- by AdamSane

- by Carnotaurus

- by Fatherjack

- by Tanu Sood

- by Brian

- by Jerry Dodge

- by Janice J. Heiss

- by Benjamin Roux

- by John Do

- by Robz / Fervent Coder

- by Joe Mayo

- by mtoast

- by Max

- by Maria Sandu

- by Tanu Sood

- by Martin Hinshelwood

- by D'Arcy Lussier

- by KunaalKapoor

- by Valter Minute

- by MarkPearl

- by Nick Harrison

- by Raiden2k

< Previous Page | 457 458 459 460 461 462 463 464 465 466 467 468 | Next Page >