boost log - Page 462 - Developer IT

Logging on as root without winbind timeouts

- by Josh Kelley

How can I set up my Linux box so that, if the Active Directory domain controller is down, I can still log in as root, without any timeouts or delays? Following the example of most of the documentation out there, I've listed pam_winbind.so before pam_unix.so in my /etc/pam.d configurations. I believe that this is the cause of the problem. I remember seeing alternate /etc/pam.d setups that change the order and maybe add either pam_localuser or pam_succeed_if (to see if the uid is less than 500), but I can't find any specifics now (and I'm not enough of an expert in PAM to quickly and easily come up with a robust configuration on my own). What is the recommended setup for PAM with Winbind to avoid timeouts and delays if Active Directory is unavailable?

Read the article

Static background noise while using new headset Ubuntu 13.04

- by ThundLayr

Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

Read the article

Requiring 802.1x login before allowing access to network resources

- by Calvin Froedge

I have a ZyXel GS2200-24 managed switch, and a free-radius server running on Ubuntu 11.10. Radius is configured and when I log into the switch the authentication goes through Radius. Now, I'm trying to ensure that access to web resources (as an example, I set up a web server on the ip 192.168.1.2) requires first authenticating with radius, before the switch will allow the connection. Am I correct that this should be handled at the switch level? What are these rules usually called / how are they usually defined?

Read the article

SQL Server 2008 R2 SQL Server has encountered x occurrence(s) of I/O requests taking longer than 15 seconds to complete on file

- by Natalia

When I alter or create a stored procedure directly on production or QA database, after a few seconds I start experience timeouts and application becomes unavailable. Log files shows this error: SQL Server has encountered 3 occurrence(s) of I/O requests taking longer than 15 seconds to complete on file [C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\QA_Database.ldf] in database [QA_Database] (9). The OS file handle is 0x0000000000000568. The offset of the latest long I/O is: 0x0000002821a200 We have SQL Server 2008 R2 installed, including latest Service Pack. Production and staging environments are completely separated. I tried to reproduce it on QA, but to no avail. I have no clue what it could be. Appreciate your help.

Read the article

Scheduled task to map a network drive runs, but doesn't map the drive

- by bikefixxer

I have a task set up to run whenever the computer is logged onto that deletes all network folders and maps a network drive. Here is what is in the batch file: @echo off net use * /delete /y net use b: \\Server\Share /user:DOMAIN\Username password exit When the computer is restarted or logged off and back on, the task runs fine (according to the scheduled tasks window saying when it ran last) but the mapped drive doesn't show up. I'll open the command prompt and type "net use" and it simply says "There are no entries in the list". If I then right click on the task and run it, it works and the mapped drive shows up. I've checked the log and nothing shows up. I've tried adding a timer in the batch file so it waits 10 seconds (ping 1.1.1.1 -n 1 -w 10000nul) thinking that maybe the network wasn't connected, but that didn't work. What else can I try? Thanks!

Read the article

spawn-fcgi/ fast CGi php crashes without traces in logs, on Gentoo

- by user39046

Hello, I recently moved from apache to a Nginx/fastcgi solution, I had it running on a Fedora system and had no problems, but, since i moved all to Gentoo , the Spawn-fCGI / fastcgi php daemon dies, and i can't find out any errors reports on /var/log/messages , so i don't know why this happens. I've seen that fastcgi is somehow different from the fedora distro, on gentoo as it has different conf files and init.d startup scripts, Can someone help me make it more stable? The number of requests that i had isn't any different from the ones I had on fedora, so i use the default conf that comes with the distro..and in about some hours it simply dies... Thank you very much

Read the article

Desktop icons disappears when Nautilus is launched, until next boot

- by Santosh

What happens: When I log in into my Ubuntu everything is normal, I have some icons on my desktop and I can see them at this point of time. As soon as I click on the explorer (nautilus) on the Launcher bar, everything goes (disappers) and never comes. No matter how many time you click on the launcher, you can't open nautilus. I tried opening nautilus from the terminal, get the following: santosh@santosh:~$ nautilus Initializing nautilus-gdu extension ** (nautilus:2158): DEBUG: SyncDaemon already running, initializing SyncdaemonDaemon object Initializing nautilus-open-terminal extension (nautilus:2158): Gtk-CRITICAL **: gtk_action_set_visible: assertion `GTK_IS_ACTION (action)' failed (nautilus:2158): Gtk-CRITICAL **: gtk_action_set_visible: assertion `GTK_IS_ACTION (action)' failed Segmentation fault I suspect on "Segmentation fault" on the last line, whats that? I was amazed when I run this command in sudo.: santosh@santosh:~$ sudo nautilus Initializing nautilus-gdu extension ** (nautilus:2216): DEBUG: Syncdaemon not running, waiting for it to start in NameOwnerChanged Initializing nautilus-open-terminal extension (nautilus:2216): Gtk-CRITICAL **: gtk_action_set_visible: assertion `GTK_IS_ACTION (action)' failed (nautilus:2216): Gtk-CRITICAL **: gtk_action_set_visible: assertion `GTK_IS_ACTION (action)' failed Nautilus-Share-Message: Called "net usershare info" but it failed: 'net usershare' returned error 255: net usershare: cannot open usershare directory /var/lib/samba/usershares. Error No such file or directory Please ask your system administrator to enable user sharing. As soon as I type sudo nautilus and hit enter, nautilus starts and the desktop background changes (to the default which ubuntu has). Don't know why but at this point as soon as I click on Desktop (from the left pane) then nautilus closes. Did anyone has same issue? I am corrently working with commandline to do my work and its a big pain. Additional Information: Another thing I have noticed that when I want to open the location of PDF file I am reading in document viewer (by clicking the folder icon). It gives error "Could not open the containing folder" and "Failed to execute child process "nautilus" (Permission denied)". Any idea?

Read the article

Watch IPL League 2010 Online On YouTube

- by Suganya

Having said that IPL League match for the year 2010 starts tomorrow, Many of us would be interested in watching the broadcast live online. The first match between Deccan chargers and Kolkata Knight Riders starts tomorrow at 20.00 IST. IPL T20 lasts for 45 days starting from March 12th 2010 till April 25th 2010. The entire league takes place in India. The opening ceremony takes place on 12th continued by the official game between Deccan Chargers and Kolkata Knight Riders Most of us would not be able to watch the match on Television. So this year IPL joins hand with Google to make it available live on NET. How to Watch IPL Match Live Online Google and IPL has joined their hands to make the match available online for all the viewers around the world. To watch the IPL Match live online log on here How to Watch IPL Match Live On Mobile IPL and GCV(Global Cricket Ventures) are tied to July Systems. You can watch IPL matches live on mobile by accessing the link directly using a GPRS enabled mobile or viewers can simply call from their mobile phone to MiX (Mobile Internet Experience) using the Toll Free number 08 123 123 123. Once you call this Toll Free number a link will be sent to your mobile. You can access that link to view the live cricket on your mobile. Watch IPL League Cricket Match Live Online Watch IPL League Cricket Match Live On Mobile Join us on Facebook to read all our stories right inside your Facebook news feed.

Read the article

CentOS only detecting 50% of ram

- by Devator

I have 16GB ram in my machine. Before, free -m outputted the normal 16 GB ram, however now (after a reboot) it only detects 8 GB ram. Is one ram module damaged? grep -i memory /var/log/dmesg outputs Memory: 15621184k/16017200k available (2535k kernel code, 387120k reserved, 1748k data, 196k init). (Which looks like 16 GB to me). Free -m outputs: total used free shared buffers cached Mem: 7484 7415 68 0 6104 524 -/+ buffers/cache: 786 6697 Swap: 2055 0 2054 Anything I might be missing? Thanks in advance.

Read the article

LFD always stops working after ~30 days, until I give /etc/csf/csf.pl -r

- by gus

When I give /etc/csf/csf.pl -r , I see lots of lines flushing, then I begin to get the notification emails again, (several emails per day), for example: Time: Wed Sep 12 08:39:47 2012 +0800 IP: 221.13.104.162 (CN/China/-) Failures: 5 (sshd) Interval: 300 seconds Blocked: Permanent Block Log entries: Sep 12 08:39:25 MyHost sshd[9677]: Failed password for root from 221.13.104.162 port 51106 ssh2 Sep 12 08:39:28 MyHost sshd[9712]: Failed password for root from 221.13.104.162 port 51690 ssh2 Sep 12 08:39:32 MyHost sshd[9739]: Failed password for root from 221.13.104.162 port 52128 ssh2 Sep 12 08:39:36 MyHost sshd[9778]: Failed password for root from 221.13.104.162 port 52670 ssh2 Sep 12 08:39:40 MyHost sshd[9821]: Failed password for root from 221.13.104.162 port 53155 ssh2 And then after about 30 days, the emails stop coming, it is as if something has filled up, and requires flushing again. I don't know much about CSF/LFD, but I would have imagined that this would work in a FIFO manner, so it should be able to run indefinitely within finite space. My /etc/csf/version.txt says 4.83 My cat /proc/version says Linux version 2.6.18-028stab066.8 (root@rhel5-64-build) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Fri Nov 27 20:19:25 MSK 2009

Read the article

Weblogic domain scale up using EM Grid Control 11gR1

- by dmitry.nefedkin(at)oracle.com

As you know a weblogic domain consists of set of servers running independently or in a cluster mode, sharing the distributed resources. And in most environments weblogic cluster consists of multiple managed servers running simultaneously and working together to provide increased scalability and reliability. These servers can run on the same machine, or be located on different machines. It's a common task to increase a cluster's capacity by adding new machines to the cluster to host the new server instances. You can do it by manually installing weblogic binaries to the new host and use pack/unpack commands to add a managed server to this new host. But with Enterprise Manager Grid Control 11gR1 (EMGC) there is another way - Fusion Middleware Domain Scale Up procedure. I'm going to show you how it works.Here is a picture of my medrec_oradb weblogic domain, what is registered in EMGC. It contains an admin server and a cluster MedRecCluster with the single managed server MS1. Both admin and managed servers are on the same host oel46-vmware, it's a virtual machine with OEL 4.6 that runs inside our Oracle VM infrastructure. And here are the application deployments, note that couple of applications are deployed to the cluster.First of all I have to prepare a new machine that will host new managed sever of my cluster. I created new VM with OEL 5.4 using the corresponding Oracle VM template available in Oracle E-Delivery site for Oracle Linux and Oracle VM and named it wls1032. Next step is to install Oracle EM Grid Control 11gR1 Agent to this new host. You can download it from the OTN page and install it manually, or you can use Agent Installation Deployment procedure available in EMGC (Deployments->Agent Installation->Install Agent). Anyway, when you agent is up and running on the new machine, you will see it in EMGC Console in the Targets->Hosts subtab.Now we are ready to scale up our weblogic domain. Click the Deployments tab in Oracle Enterprise Manager Grid Control, and then click Deployment Procedure. Select a Fusion Middleware Domain Scale Up procedure from the list, and click Schedule Deployment. The first page of the FMW Domain Scale Up Wizard is displayed and you can proceed with the deployment process.Select the domain from list, enter the working directory on the admin server host, and also fill the weblogic credentials for the administration server console and the OS credentials for the admin server host. Click Next button. The next step allows you to configure you domain, to add a new manager server to the cluster you should select the cluster in the tree and click Add Server button. Select the newly added server in a tree, choose the target host and enter the configuration details of your managed server. You can also add new machine and node manager details. Please note that you cannot change the values in Domain Location and Fusion Middleware Home fields, so these locations on the target host will be the same as for the admin server host. Working directory on the target host should have enough free space to store FMW home binaries and domain configuration files. In my experience the working directories should have at least 3 Gb of free space. The last thing you should fill is the OS credentials for the target host. The next steps allows you to schedule the execution of the procedure, it is started immediately in my example. The last step is just a review the configuration for the domain scale up. Click Submit to launch the process. You can track the status of the procedure execution by selecting Deployments->Deployment Procedures->Procedure Completion Status in the EMGC Console.As you can see in the picture below, the procedure consists of the many steps, and I'm going to share my experience about the issues that I had at some of the steps. Please keep in mind that you can always continue the execution from the last successfully completed step by clicking Retry button.Check OUI Prerequisites step may fail if the target host does not pass prerequisites checks for Weblogic Server installation such as amount of RAM, linux packages installed, etc. Create FMW Clone Archive step may fail if you do not have enough free space in the working directory on the administration server host.Transfer cloning archive to targets step may fail if the EMGC agents on the admin server host or on target host are not secured. You should secure the agent by issuing ./emctl secure agent command from $AGENT_HOME/bin directory and entering the agent registration password.Both Transfer cloning archive to targets and Apply Clone at target hosts steps may fail if you do not have enough free space in the working directory on the target host. The most complicated issue I had on the Run Inventory Collection step. The step failed and I noticed that the agent on the target server is also failed with the following error in the $AGENT_HOME/sysman/log/emagent.trc log file:2010-12-28 11:50:34,310 Thread-2838952848 ERROR upload: Failed to upload file A0000008.xml: Fatal Error.Response received: 500|ORA-20603: The timezone of the multiagent target (/Farm_Localhost_MedRec_medrec_oradb/medrec_oradb,weblogic_domain)is not consistent with the timezone (America/Los_Angeles) reported by other agents.2010-12-28 11:50:34,310 Thread-2838952848 ERROR upload: 1 Failure(s) in a row or XML error for A0000008.xml, retcode = -6, we give up2010-12-28 11:50:35,552 Thread-2838952848 WARN upload: FxferSend: received fatal error in header from repository: https://oel46-vmware:1159/em/uploadFATAL_ERROR::500|ORA-20603: The timezone of the multiagent target (/Farm_Localhost_MedRec_medrec_oradb/medrec_oradb,weblogic_domain)is not consistent with the timezone (America/Los_Angeles) reported by other agents.2010-12-28 11:50:35,552 Thread-2838952848 ERROR upload: number of fatal error exceeds the limit 32010-12-28 11:50:35,552 Thread-2838952848 ERROR upload: agent will shutdown now2010-12-28 11:50:35,552 Thread-2838952848 ERROR : Signalled to Exit with status 55. Too many fatal upload failures2010-12-28 11:50:35,552 Thread-2838952848 ERROR upload: 1 Failure(s) in a row or XML error for A0000008.xml, retcode = -6, we give up2010-12-28 11:50:35,552 Thread-3044607680 ERROR main: EMAgent abnormal terminatingI checked the timezone of my domain target inside EMGC repositoryselect timezone_regionfrom mgmt_targets where target_type = 'weblogic_domain' and display_name = 'medrec_oradb'"TIMEZONE_REGION""America/Los_Angeles"Then checked the timezone of my agents and indeed, they differedselect target_name, timezone_region from mgmt_targets where type_display_name = 'Agent'"TARGET_NAME" "TIMEZONE_REGION""oel46-vmware:3872" "America/Los_Angeles""wls1032.imc.fors.ru:3872" "America/New_York"So I had to change the timezone on the wls1032 host and propagate this changes to the agent and to the EMGC repository. Here was the steps:issued system-config-date command on wls1032.imc.fors.ru and set timezone to "America/Los_Angeles"propagated the changes to the agent bu executing ./emctl resetTZ agent command from $AGENT_HOME/bin directoryconnected to EMGC repository as sysman and executed the following PL/SQL block: begin mgmt_target.set_agent_tzrgn('wls1032.imc.fors.ru:3872','America/Los_Angeles'); commit; end;After that I had to clear the pending uploads on wls1032.imc.fors.ru: rm -r $AGENT_HOME/sysman/emd/state/* rm -r $AGENT_HOME/sysman/emd/collection/* rm -r $AGENT_HOME/sysman/emd/upload/* rm $AGENT_HOME/sysman/emd/lastupld.xml rm $AGENT_HOME/sysman/emd/agntstmp.txt $AGENT_HOME/bin/emctl start agent $AGENT_HOME/bin/emctl clearstate agentThe last part of this solution was to resync the agent in EMGC console by clicking Agent Resynchronization button (please leave "Unblock agent on successful completion of agent resynchronization" checkbox checked in the next screen).After that I issued ./emctl upload command from $AGENT_HOME/bin on the wls1032 host, and my previous error disappeared, but I catched another one: EMD upload error: Failed to upload file A0000004.xml: HTTP error.Response received: ERROR-400|Data will be rejected for upload from agent 'https://wls1032.imc.fors.ru:3872/emd/main/', max size limit for direct load exceeded [7544731/5242880]So the uploading XML file size was 7 Mb, and the limit on OMS was 5 Mb. To increase the max file size limit to 20 Mb I had to connect to the OMS host and execute the following commands from $OMS_HOME/bin directory: ./emctl set property -name em.loader.maxDirectLoadFileSz -value 20971520 -module emoms ./emctl stop oms ./emctl start omsAfter that I issued ./emctl upload command from $AGENT_HOME/bin on the wls1032 one more time and it completed successfully. The agent uploaded the configuration information to the EMGC repository and I was able to see the results of my weblogic domain scale-up in EMGC Console.DeploymentsSo, now the weblogic cluster contains 2 managed servers located on the different hosts. This powerful feature of the Enterprise Manager Grid Control is a part of the WebLogic Server Management Pack Enterprise Edition.

Read the article

AWS VPN Tunnel going down without traffic

- by Asfura

I managed to setup a site-to-site VPN connection from Amazon VPC to a company's network, and after a lot of configuration it was working fine, but now i realized that the VPN tunnel is DOWN every time there's no traffic going trough for a couple minutes. The only way that i have found to generate traffic is to reach the amazon instance from the company's network and then the tunnel goes up again. I had a cronjob doing ping every minute, but i think it should have a keepalive option somewhere, or at least a log file of the tunnels to find out what's going on. Any ideas to keep the tunnel up and/or bring it up from amazon? The firewall is a Checkpoint R75.20, it only allows one tunnel at a time for the same subnet, so i cant have both tunnels active. Thank you, any questions just ask. EDIT I forgot to add, the ping keepalive was working great (maybe generating a bit of traffic, but nothing to worry about), the connection dropped because i had to restart the instance, and it that little time it dropped me.

Read the article

Refactor This (Ugly Code)!

- by Alois Kraus

Ayende has put on his blog some ugly code to refactor. First and foremost it is nearly impossible to reason about other peoples code without knowing the driving forces behind the current code. It is certainly possible to make it much cleaner when potential sources of errors cannot happen in the first place due to good design. I can see what the intention of the code is but I do not know about every brittle detail if I am allowed to reorder things here and there to simplify things. So I decided to make it much simpler by identifying the different responsibilities of the methods and encapsulate it in different classes. The code we need to refactor seems to deal with a handler after a message has been sent to a message queue. The handler does complete the current transaction if there is any and does handle any errors happening there. If during the the completion of the transaction errors occur the transaction is at least disposed. We can enter the handler already in a faulty state where we try to deliver the complete event in any case and signal a failure event and try to resend the message again to the queue if it was not inside a transaction. All is decorated with many try/catch blocks, duplicated code and some state variables to route the program flow. It is hard to understand and difficult to reason about. In other words: This code is a mess and could be written by me if I was under pressure. Here comes to code we want to refactor: private void HandleMessageCompletion( Message message, TransactionScope tx, OpenedQueue messageQueue, Exception exception, Action<CurrentMessageInformation, Exception> messageCompleted, Action<CurrentMessageInformation> beforeTransactionCommit) { var txDisposed = false; if (exception == null) { try { if (tx != null) { if (beforeTransactionCommit != null) beforeTransactionCommit(currentMessageInformation); tx.Complete(); tx.Dispose(); txDisposed = true; } try { if (messageCompleted != null) messageCompleted(currentMessageInformation, exception); } catch (Exception e) { Trace.TraceError("An error occured when raising the MessageCompleted event, the error will NOT affect the message processing"+ e); } return; } catch (Exception e) { Trace.TraceWarning("Failed to complete transaction, moving to error mode"+ e); exception = e; } } try { if (txDisposed == false && tx != null) { Trace.TraceWarning("Disposing transaction in error mode"); tx.Dispose(); } } catch (Exception e) { Trace.TraceWarning("Failed to dispose of transaction in error mode."+ e); } if (message == null) return; try { if (messageCompleted != null) messageCompleted(currentMessageInformation, exception); } catch (Exception e) { Trace.TraceError("An error occured when raising the MessageCompleted event, the error will NOT affect the message processing"+ e); } try { var copy = MessageProcessingFailure; if (copy != null) copy(currentMessageInformation, exception); } catch (Exception moduleException) { Trace.TraceError("Module failed to process message failure: " + exception.Message+ moduleException); } if (messageQueue.IsTransactional == false)// put the item back in the queue { messageQueue.Send(message); } } You can see quite some processing and handling going on there. Yes this looks like real world code one did put together to make things work and he does not trust his callbacks. I guess these are event handlers which are optional and the delegates were extracted from an event to call them back later when necessary. Lets see what the author of this code did intend: private void HandleMessageCompletion( TransactionHandler transactionHandler, MessageCompletionHandler handler, CurrentMessageInformation messageInfo, ErrorCollector errors ) { // commit current pending transaction transactionHandler.CallHandlerAndCommit(messageInfo, errors); // We have an error for a null message do not send completion event if (messageInfo.CurrentMessage == null) return; // Send completion event in any case regardless of errors handler.OnMessageCompleted(messageInfo, errors); // put message back if queue is not transactional transactionHandler.ResendMessageOnError(messageInfo.CurrentMessage, errors); } I did not bother to write the intention here again since the code should be pretty self explaining by now. I have used comments to explain the still nontrivial procedure step by step revealing the real intention about all this complex program flow. The original complexity of the problem domain does not go away but by applying the techniques of SRP (Single Responsibility Principle) and some functional style but we can abstract the necessary complexity away in useful abstractions which make it much easier to reason about it. Since most of the method seems to deal with errors I thought it was a good idea to encapsulate the error state of our current message in an ErrorCollector object which stores all exceptions in a list along with a description what the error all was about in the exception itself. We can log it later or not depending on the log level or whatever. It is really just a simple list that encapsulates the current error state. class ErrorCollector { List<Exception> _Errors = new List<Exception>(); public void Add(Exception ex, string description) { ex.Data["Description"] = description; _Errors.Add(ex); } public Exception Last { get { return _Errors.LastOrDefault(); } } public bool HasError { get { return _Errors.Count > 0; } } } Since the error state is global we have two choices to store a reference in the other helper objects (TransactionHandler and MessageCompletionHandler)or pass it to the method calls when necessary. I did chose the latter one because a second argument does not hurt and makes it easier to reason about the overall state while the helper objects remain stateless and immutable which makes the helper objects much easier to understand and as a bonus thread safe as well. This does not mean that the stored member variables are stateless or thread safe as well but at least our helper classes are it. Most of the complexity is located the transaction handling I consider as a separate responsibility that I delegate to the TransactionHandler which does nothing if there is no transaction or Call the Before Commit Handler Commit Transaction Dispose Transaction if commit did throw In fact it has a second responsibility to resend the message if the transaction did fail. I did see a good fit there since it deals with transaction failures. class TransactionHandler { TransactionScope _Tx; Action<CurrentMessageInformation> _BeforeCommit; OpenedQueue _MessageQueue; public TransactionHandler(TransactionScope tx, Action<CurrentMessageInformation> beforeCommit, OpenedQueue messageQueue) { _Tx = tx; _BeforeCommit = beforeCommit; _MessageQueue = messageQueue; } public void CallHandlerAndCommit(CurrentMessageInformation currentMessageInfo, ErrorCollector errors) { if (_Tx != null && !errors.HasError) { try { if (_BeforeCommit != null) { _BeforeCommit(currentMessageInfo); } _Tx.Complete(); _Tx.Dispose(); } catch (Exception ex) { errors.Add(ex, "Failed to complete transaction, moving to error mode"); Trace.TraceWarning("Disposing transaction in error mode"); try { _Tx.Dispose(); } catch (Exception ex2) { errors.Add(ex2, "Failed to dispose of transaction in error mode."); } } } } public void ResendMessageOnError(Message message, ErrorCollector errors) { if (errors.HasError && !_MessageQueue.IsTransactional) { _MessageQueue.Send(message); } } } If we need to change the handling in the future we have a much easier time to reason about our application flow than before. After we did complete our transaction and called our callback we can call the completion handler which is the main purpose of the HandleMessageCompletion method after all. The responsiblity o the MessageCompletionHandler is to call the completion callback and the failure callback when some error has occurred. class MessageCompletionHandler { Action<CurrentMessageInformation, Exception> _MessageCompletedHandler; Action<CurrentMessageInformation, Exception> _MessageProcessingFailure; public MessageCompletionHandler(Action<CurrentMessageInformation, Exception> messageCompletedHandler, Action<CurrentMessageInformation, Exception> messageProcessingFailure) { _MessageCompletedHandler = messageCompletedHandler; _MessageProcessingFailure = messageProcessingFailure; } public void OnMessageCompleted(CurrentMessageInformation currentMessageInfo, ErrorCollector errors) { try { if (_MessageCompletedHandler != null) { _MessageCompletedHandler(currentMessageInfo, errors.Last); } } catch (Exception ex) { errors.Add(ex, "An error occured when raising the MessageCompleted event, the error will NOT affect the message processing"); } if (errors.HasError) { SignalFailedMessage(currentMessageInfo, errors); } } void SignalFailedMessage(CurrentMessageInformation currentMessageInfo, ErrorCollector errors) { try { if (_MessageProcessingFailure != null) _MessageProcessingFailure(currentMessageInfo, errors.Last); } catch (Exception moduleException) { errors.Add(moduleException, "Module failed to process message failure"); } } } If for some reason I did screw up the logic and we need to call the completion handler from our Transaction handler we can simple add to the CallHandlerAndCommit method a third argument to the MessageCompletionHandler and we are fine again. If the logic becomes even more complex and we need to ensure that the completed event is triggered only once we have now one place the completion handler to capture the state. During this refactoring I simple put things together that belong together and came up with useful abstractions. If you look at the original argument list of the HandleMessageCompletion method I have put many things together: Original Arguments New Arguments Encapsulate Message message CurrentMessageInformation messageInfo Message message TransactionScope tx Action<CurrentMessageInformation> beforeTransactionCommit OpenedQueue messageQueue TransactionHandler transactionHandler TransactionScope tx OpenedQueue messageQueue Action<CurrentMessageInformation> beforeTransactionCommit Exception exception, ErrorCollector errors Action<CurrentMessageInformation, Exception> messageCompleted MessageCompletionHandler handler Action<CurrentMessageInformation, Exception> messageCompleted Action<CurrentMessageInformation, Exception> messageProcessingFailure The reason is simple: Put the things that have relationships together and you will find nearly automatically useful abstractions. I hope this makes sense to you. If you see a way to make it even more simple you can show Ayende your improved version as well.

Read the article

opennebula VM submission failure

- by user61175

I am new to OpenNebula, the cloud is up and running but the VM is failed to be submitted to a node. I got the following error from the log file. ERROR: Command "scp ubuntu:/opt/nebula/images/ttylinux.img node01:/var/lib/one/8/images/disk.0" failed. ERROR: Host key verification failed. Error excuting image transfer script: Host key verification failed. The key verification keeps failing. I need to know what is going wrong ... thanks :)

Read the article

Postgres 9.0 locking up, 100% CPU

- by Jake

We are having a problem where our Postgres 9.0 server occasionally locks up and kills our webapp. Restarting Postgres fixes the problem. Here's what I've been able to observe: First, usage of one CPU jumps to 100% for a few minutes Disk operations drop to ~0 during this time Database operations drop to 0 (blocks and tuples per sec) Logs show during this time: WARNING: worker took too long to start; cancelled WARNING: worker took too long to start; cancelled No Queries in logs (only those over 200ms are logged) No unusually long-running queries logged before or during Then the second CPU jumps to 100% The number of postgres processes jumps from the usual 8-10 to ~20 Matched by a spike in Postgres Blocks per second (about twice normal) Logs show LOG: could not accept SSL connection: EOF detected Queries are running but slow Restarting postgres returns everything to normal Setup: Server: Amazon EC2 Large Ubuntu 10.04.2 LTS Postgres 9.0.3 Dedicated DB server Does anyone have any idea what's causing this? Or any suggestions about what else I should be checking out?

Read the article

CodePlex Daily Summary for Friday, October 04, 2013

CodePlex Daily Summary for Friday, October 04, 2013Popular ReleasesMoreTerra (Terraria World Viewer): Version 1.11: Release Notes Release 1.11 =========== =Bug Fixes= =========== Now works with Terraria 1.2 wld files. =============== =Known Issues= =============== Not all tiles and items are accounted for. Missing tiles just show up as pink. This is actively being worked on but wanted to get a build out that works with 1.2VG-Ripper & PG-Ripper: PG-Ripper 1.4.19: NEW: Added Option to login as Guest NEW: Added Support for "ImageTeam.org linksStyleMVVM: 3.1.4: This release has virtually no code change but adds multiple new Item templates for the Windows Phone 8 platformSystem Center Orchestrator Community Project: Orchestrator Visio and Word Generator 1.5: This tool lets you export Orchestrator runbooks as a Visio diagram, and you can also generate an optional Word file as well. Components exported as of v1.5 are : - Title of the runbook - Activities and their names/thumbnails/description (description is displayed as a callout in the Visio diagram, attached to the shape of the activity) - Links and their names/colors - Looping and their interval Thumbnails and activities are grouped in the Visio diagram, for easy manipulation of the diagra...State of Decay Save Manager: Version 1.0.4: Add version at bottom of formDNN® Form and List: DNN Form and List 06.00.07: DotNetNuke Form and List 06.00.06 Changes to 6.0.7•Fixed an error in datatypes.config that caused calculated fields to be missing in 6.0.6 Changes to 6.0.6•Add in Sql to remove 'text on row' setting for UserDefinedTable to make SQL Azure compatible. •Add new azureCompatible element to manifest. •Added a fix for importing templates. Changes to 6.0.2•Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 •Change: Data is now stored in nvarchar(max) instead of ntext C...SimpleExcelReportMaker: Serm 0.03: SourceCode and Sample .Net Framework 3.5 AnyCPU compile.RDFSharp - Start playing with RDF!: RDFSharp-0.6.6: GENERAL (NEW) Introduction of INT64 hashing engine (codenamed "Greta"); QUERY (FIX) Incorrect query evaluation due to faulty detection of optional patterns (v0.6.5 regression); (FIX) Missing update of PatternGroupID information after adding patterns and filters to a pattern group; (FIX) Ensure Context information of a pattern is not null before trying to collect it as variable; (MISC) Changed semantics of Context information of a pattern: if not provided, it will be ignored; (MISC...Application Architecture Guidelines: App Architecture Guidelines 3.0.8: This document is an overview of software qualities, principles, patterns, practices, tools and libraries.C# Intellisense for Notepad++: Release v1.0.7.2: - smart indentation - document formatting To avoid the DLLs getting locked by OS use MSI file for the installation.BlackJumboDog: Ver5.9.6: 2013.09.30 Ver5.9.6 (1)SMTP???????、???????????????? (2)WinAPI??????? (3)Web???????CGI???????????????????????Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.2: Mostly internal code tweaks. added -nosize switch to turn off the size- and gzip-calculations done after minification. removed the comments in the build targets script for the old AjaxMin build task (discussion #458831). Fixed an issue with extended Unicode characters encoded inside a string literal with adjacent \uHHHH\uHHHH sequences. Fixed an IndexOutOfRange exception when encountering a CSS identifier that's a single underscore character (_). In previous builds, the net35 and net20...AJAX Control Toolkit: September 2013 Release: AJAX Control Toolkit Release Notes - September 2013 Release (Updated) Version 7.1002September 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Important UpdateThis release has been updated to fix two issues: Upda...WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.4.apifix-alpha: WDTVHubGen.v2.1.4.apifix-alpha is for testers to figure out if we got the NEW api plugged in ok. thanksVisual Log Parser: VisualLogParser: Portable Visual Log Parser for Dotnet 4.0AudioWordsDownloader: AudioWordsDownloader 1.1 build 88: New features list of words (mp3 files) is available upon typing when a download path is defined list of download paths is added paths history settings added Bug fixed case mismatch in word search field fixed path not exist bug fixed when history has been used path, when filled from dialog, not stored refresh autocomplete list after path change word sought is deleted when path is changed at the end sought word list is deleted word list not refreshed download ends. word lis...Wsus Package Publisher: Release v1.3.1309.28: Fix a bug, where WPP crash when running on a computer where Windows was installed in another language than Fr, En or De, and launching the Update Creation Wizard. Fix a bug, where WPP crash if some Multi-Thread job are launch with more than 64 items. Add a button to abort "Install This Update" wizard. Allow WPP to remember which columns are shown last time. Make URL clickable on the Update Information Tab. Add a new feature, when Double-Clicking on an update, the default action exec...Tweetinvi a friendly Twitter C# API: Alpha 0.8.3.0: Version 0.8.3.0 emphasis on the FIlteredStream and ease how to manage Exceptions that can occur due to the network or any other issue you might encounter. Will be available through nuget the 29/09/2013. FilteredStream Features provided by the Twitter Stream API - Ability to track specific keywords - Ability to track specific users - Ability to track specific locations Additional features - Detect the reasons the tweet has been retrieved from the Filtered API. You have access to both the ma...WPF Extended DataGrid: WPF Extended DataGrid 2.0.0.4 binaries: Improved performance of GroupByAcDown?????: AcDown????? v4.5: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.5 ???? AcPlay????????v3.5 ????????，???????????30% ?? ???????GoodManga.net???? ?? ?????????? ?? ??Acfun?????????? ??Bilibili??????????? ?????????flvcd???????? ??SfAcg????????????? ???????????? ???????????????? ????32...New ProjectsAnalysis Services Activity Viewer 2012: This project was created from a blog post I wrote back in February 2013 http://redphoenix.me/2013/08/22/upgrade-activity-viewer-2008-to-sql-server-2012/ARYSTA SYSTEM: Notebook System A/R Sales * Sales Order * Delivery * Sales Invoice * Sales Return * A/R Credit Memo * A/R Debit Memo A/P Purchasing * Purchase Order BEWELL SYSTEM: This system is design for Bewell-C Incorporated. Project Manager: Ben Penafiel System Engineer: Jhay Camba Report Designer: William Damasco Caching IOC: Caching IOC Container This will cache any Interface return results making it really easy to introduce caching to your solution.Grupo Anclita: Trabajo Final Laboratorio 4Halcyonic Skin by HTML5-UP - for DNN: This skin was converted for use in DNN by Michael Doxsey. Original HTML template designed and built by HTML5-UP: http://html5up.net/halcyonic/ ProPro: project about other projectsS3Unlock: Unlocks S3 agents that are stuck installing.sdfsdlfsdlkj01: dsfdffsdSerendipity - Responsive Skin for DNN: This is an HTML Template by Elemis, converted for use in DNN. Elemis URL: http://elemisfreebies.com/premium-themes/ Free for personal use and ed. purposes only.SmartSystemMenu: Smart system menu for you.SP 2013 Custom MultiTenant Adminstration: This Project creates a custom SP 2013 Tenant Admin site template covering limitations of existing tenant admin site.Telephasic Skin by HTML5-UP - for DNN: This skin was converted for use in DNN by Michael Doxsey. Original HTML template designed and built by HTML5-UP: http://html5up.net/telephasic/TelerikedIn: Social web app trying to look and feel like the famous LinkedInTerra 2: Generador de personajes para el juego de rol Terra2tsydev01: TextLineUpdateVds2465 Parser: This Project is about implementing a Parser for the Vds2465 protocol. It includes parsing and generating Vds2465 telegram bytes.Your Appliances: Empresa De ElectrodomesticosZeroFour by HTML5-UP - for DNN: This skin was converted for use in DNN by Michael Doxsey. Original HTML template designed and built by HTML5-UP: http://html5up.net/zerofour.

Read the article

Cron Tips for not running cron jobs on holidays (the monday of a three day weekend)

- by Poul

We have about a one hundred machine set-up with each machine running cron jobs like starting and stopping services and archiving these services' log files at the end of the day to a centralized repository. One headache we have is the three-day weekend (we're closed on holidays). We don't want the services starting up on those days and connecting to our business partner's machines. We currently do this by manually commenting out the most critical jobs and letting a bunch of errors happen all day. Not ideal. Basically if a job has '1-5' set in the day field we want this to mean 'work days' and not Monday to Friday'. We have a database that keeps track of which days are indeed 'work days' So, is it possible to override Cron's day-matching algorithm, or is there some other way to easily set a cron setting to avoid things starting up on a Monday holiday? Thanks!

Read the article

OCS 2007 R2 Client not syncing Addrss book

- by Noah

I've checked online for most solution for this issue, but nothing seems to be working. When I check the log files on our OCS 2007 R2 server, it is identifying 25 users in the address book. However, when I try and force a sync with the clients, they do not update. I can find the users if I search for them, but they are not coming down by themselves. Is there anything I can check or force from the client side? There is no address book file locally to delete and re-force down.

Read the article

How to get AMD Catalyst working on Arch x86_64

- by gh403

I've got a Dell Inspiron 15R 7520 with AMD's hybrid "PowerXpress" graphics. The integrated graphics card is (if I understand it correctly) integrated with the i7-3612QM processor, and the discrete graphics card is a "Southern Islands" Radeon HD 7730M. The integrated graphics work perfectly under Arch. However, the discrete graphics don't. I have tried several different methods, and the one that seems to get me the farthest with the least effort is the AUR package catalyst-total-pxp. After installing, rebooting, and issuing the commands # aticonfig --initial # pxp_switch_catalyst amd # X X completely fails to start. The X log can be found here. I don't understand what is failing; potentially, it has something to do with the way my card is hooked up--I think it's muxless, but I really don't know. What is the matter here? Any help would be appreciated.

Read the article

Connection problem between redmine and svn

- by WombaT

I have server controlled by Debian 6.0. I installed and configured redmine some time ago, and now configured svn server. Now i'm trying to configure redmine to be able to view svn repository. URL is: https://192.168.11.78/svn/bee Connection is not working, log show this error: Error parsing svn output: #<REXML::ParseException: No close tag for /lists/list> Google says that its common error, and its possible to fix it by permamently accept of server certificate so i did it and nothing. Still dont work. Later, i added [global] store-plaintext-passwords = no in file .subversion/servers I did this (and cert accept) for both root and www-data users. Nothing helped, still got error in redmine The entry or revision was not found in the repository. What else i can do with it?

Read the article

Windows 2003 Enterprise Server becomes unresponsive occasionally

- by Derek Ivey

We're experiencing issues with our Windows 2003 server, which runs SQL Server 2005 SP1. We notice that sometimes the entire server becomes unresponsive and I captured a screenshot of the task manager when this happened. I noticed that the processes are not displayed during this time and all of the memory information and handles disappear (as shown in the screenshot). Does anyone have any ideas as to what could be wrong with this sytem? I'm planning to take it down over the weekend to run Memtest86. Screenshot: http://dl.dropbox.com/u/2058/windows_screenshot.png The issue is resolved by a reboot, but I'd like to figure out the cause of this and get it fixed. I also tried to run a ping when this occurred and I got the following error in the event log: "Application popup: ping.exe - Application Error: The application failed to initialize properly (0xc0000142). Click on OK to terminate the application." Thanks, Derek

Read the article

IIS will not install on Windows 7 Pro 64 bit

- by Paul

I have a new PC running Windows 7 Professional 64 bit. I have an issue installing IIS - it goes through the install process, but at the end tells me "not all components could be installed", with no additional information given. There is no sign of an error in the install log or in event viewer. However, at this point, IIS is installed and working! I can run IIS manager, browse to localhost and see the default page, but at the next reboot the system rolls back and th einstall vanishes. I have tried installing II using the Windows Components section in Add/Remove Programs, I have also tried the Web Platform Installer and using the command line, all with the same end result.

Read the article

ssh through a bastion machine works on someone else's desktop but not my own

- by Terrence Brannon

I have to ssh into a bastion (jump) server in order to get to the final server. On the jump server, my .ssh/config says: Host * ForwardAgent yes My co-worker uses PuTTy and Pageant. When I use a putty shell to connect from his desktop to the final server as root via the jump server, it works fine. At my desk I cannot connect to the final server, only the jump server. However, if I go to his desk, and successfully log into the final server via the jump server, I can then go back to my desk and also do so.... but after a certain amount of time, my shells revert to the original behavior of not connecting to final server via jump server. The entire transcript of ssh -v -v -v final_server is here The relevant part to me is when the public key is offered but then it says 'we did not send a packet': debug1: Offering public key: /home/CORP/t.brannon/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug2: we did not send a packet, disable method debug3: authmethod_lookup password

Read the article

problem installing mysql on ubuntu server 10.10 machine

- by badperson

Hi, I tried installing mysql a couple of times and I'm having problems. First of all, when I install it gives me a message that it's setting up and it just hangs. I can't ctl + c out of it, so I reboot the server and try to log into the db with sudo mysql -u root -p I enter my password and then get ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) I restart the server: sudo /etc/init.d/mysql start Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service mysql start Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the start(8) utility, e.g. start mysql ~$ I try this: aptitude search mysql | grep ^i i A libdbd-mysql-perl - Perl5 database interface to the MySQL data i libmysql-java - Java database (JDBC) driver for MySQL i A libmysqlclient16 - MySQL database client library i mysql-client-5.1 - MySQL database client binaries i A mysql-client-core-5.1 - MySQL database core client binaries i mysql-common - MySQL database common files, e.g. /etc/mys i mysql-embedded - MySQL - embedded library i mysql-server-core-5.1 - MySQL database server binaries When I navigate to the folder to see if the *.sock file exists: '/var/run/mysqld/mysqld.sock' it does not. I also try this: service mysql status status: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Any ideas? On my other machines installing mysql has been a snap, not sure what the problem is here. bp

Read the article

How to tell X.org to reload input device module?

- by Vi

When X.org boots up, Synaptics touchpad works well. But when I remove the module it falls back to /dev/input/mice and don't use normal driver even when touchpad is available again. Xorg.0.log: ... (II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD) (--) Synaptics Touchpad: touchpad found # { rmmod psmouse && echo mem /sys/power/state && modprobe psmouse; } (WW) : No Device specified, looking for one... (II) : Setting Device option to "/dev/input/mice" ... How to tell X.org to try it's InputDevice again (without restarting X server)? P.S. rmmod psmouse is needed to prevent crashing of Acer Extensa 5220 when resuming from suspend-to-ram. Update: Found answer myself: Doing xinput set-int-prop "Synaptics Touchpad" "Device Enabled" 8 1 after reloading the kernel module reloads touchpad. Now suspend-to-ram works OK.

Search Results

Search found 19256 results on 771 pages for 'boost log'.

Page 462/771 | < Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469 | Next Page >

- by Josh Kelley

- by ThundLayr

- by Calvin Froedge

- by Natalia

- by bikefixxer

- by user39046

- by Santosh

- by Suganya

- by Devator

- by gus

- by dmitry.nefedkin(at)oracle.com

- by Asfura

- by Alois Kraus

- by user61175

- by Jake

- by Poul

- by Noah

- by gh403

- by WombaT

- by Derek Ivey

- by Paul

- by Terrence Brannon

- by badperson

- by Vi

< Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469 | Next Page >