Search Results

Search found 20586 results on 824 pages for 'virtual methods'.

Page 462/824 | < Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >

• How to make ssh/rsync/etc use a VLAN network interface?

  - by Annan

  A company I work for has a number of virtual servers with ElasticHosts. They are setup in such a way that eth1 is on a private VLAN connecting them to each other. This is so backups sent between servers are not charged at the same rate as external data transfer. My understanding of how VLANs and network interfaces work is sketchy at best. How can I make ssh, rsync, etc. transfer data through the VLAN? My final solution: I spent a while trying to figure this out, For all servers involved, edit /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static ONBOOT=yes HWADDR=YOUR_MAC_ADDR IPADDR=192.168.0.100 NETMASK=255.255.255.0 Where HWADDR should already be set and the last octate of IPADDR should be different from each other. Then run, on all servers /etc/init.d/network restart After this the IP addresses specified by IPADDR can be used directly as any other IP address.

  Read the article

• Can I configure mod_proxy to use different parameters based on HTTP Method?

  - by Graham Lea

  I'm using mod_proxy as a failover proxy with two balance members. While mod_proxy marks dead nodes as dead, it still routes one request per minute to each dead node and, if it's still dead, will either return 503 to the client (if maxattempts=0) or retry on another node (if it's 0). The backends are serving a REST web service. Currently I have set maxattempts=0 because I don't want to retry POSTs and DELETEs. This means that when one node is dead, each minute a random client will receive a 503. Unfortunately, most of our clients are interpreting codes like 503 as "everything is dead" rather than "that didnt work but please try that again". In order to program some kind of automatic retry for safe requests at the proxy layer, I'd like to configure mod_proxy to use maxattempts=1 for GET and HEAD requests and maxattempts=0 for all other HTTP Methods. Is this possible? (And how? :)

  Read the article

• Apache + LDAP Auth: access to / failed, reason: require directives present and no Authoritative hand

  - by Karolis T.

  Can't solve this one, here's my .htaccess: AuthPAM_Enabled Off AuthType Basic AuthBasicProvider ldap AuthzLDAPAuthoritative on AuthName "MESSAGE" Require ldap-group cn=CHANGED, cn=CHANGED AuthLDAPURL "ldap://localhost/dc=CHANGED,dc=CHANGED?uid?sub?(objectClass=posixAccount)" AuthLDAPBindDN CHANGED AuthLDAPBindPassword CHANGED AuthLDAPGroupAttribute memberUid AuthLDAPURL is correct, BindDN and BindPassword are correct also (verified with ldapvi -D ..). Apache version: Apache/2.2.9 (Debian) The error message seems cryptic to me, I have AuthzLDAPAuthoritative on so where's the problem. EDIT: LDAP modules are loaded, the problem is not with them being missing. # ls /etc/apache2/mods-enabled/*ldap* /etc/apache2/mods-enabled/authnz_ldap.load /etc/apache2/mods-enabled/ldap.load EDIT2: Solved it by changing funky Require ldap-group cn=CHANGED, cn=CHANGED line with Require valid-user Since AuthzLDAPAuthoritative is on, no other auth methods will be used and valid-user requirement will auth via LDAP. (right? :/)

  Read the article

• Apache Serving 403 Forbidden after OS X Snow Leopard Upgrade to Version 10.6.6

  - by Ian Oxley

  I've just upgraded my MacBook Pro to OS X Snow Leopard version 10.6.6 and now Apache is misbehaving: requests to http://localhost/ generate a 403 Forbidden response -- FIXED requests to any of my virtual hosts seem to generate a 200 Ok response, but contain zero bytes Some further info that might be useful: I'm using the Apache that comes bundled with OS X. I'm using PHP from http://www.entropy.ch/software/macosx/php/ (which is in /usr/local/bin) I've had look at the Apache error log and the only error seems to be the following: [notice] child pid 744 exit signal Segmentation fault (11) I'm completely stumped by this. Any help would be much appreciated. UPDATE Ok, I've managed to resolve the 403 Forbidden error thanks to http://techtrouts.com/mac-os-x-105-web-sharing-forbidden-403-on-httplocalhostusername/ I'm still having the second problem though for any request e.g. this now happens when I request http://localhost

  Read the article

• Puppet, Nagios, Munin on cPanel based hosts

  - by WinkyWolly

  I've been managing 20-30~ cPanel based hosts over the past year with Puppet, Nagios and Munin for general monitoring / trending however a lot of the methods I've had to use to deploy / manage things such as configurations a pain. For those of you who aren't familiar with cPanel - it adds a few things to yum exclude such as perl*, ruby* and so forth. This causes issues with me being able to bootstrap monitoring on a new server via Puppet (well via the Package type) due to a bunch of conflicts with installing via Yum. Now I could create a custom RPM for everything and remove certain dependencies from the spec file however I would like to avoid this if possible. Does anyone have any proposed functional ways to manage this sort of environment? Currently I install Puppet, Facter and Munin via RPM's and force install using --nodeps and such (since they're installed, just no the ones Yum wants). Nagios I installed manually from source at this time (likely will create RPM's however I want to tackle this general issue first).

  Read the article

• VMWare OVA file

  - by Matteo Mosca

  I've received an .OVA file and I need to be aple to open/parse it. When I try to open it with VMware player, I get the following error: "Failed to open virtual machine: Failed to query source for information." When I try to open it with the Converter standalone client I get: "Unable to parse the OVF file" The extension can be OVF or OVA so I did choose the right file tipe from the open file dialog. If anyone had similar experience and solved it, please let me know. Thanks.

  Read the article

• Juniper SRX1400 VPN

  - by ank

  I have been trying to set up a client VPN on a Juniper SRX1400 without much success. All documentation I found from Juniper and elsewhere does a lot of other (difficult and wonderful) things other than the simple things I want to do. We already have a VPN running on CISCO PIX hardware which we need to put to rest and we pretty much like to replicate the functionality, which is: 1) client makes a request to the outside interface of the SRX1400, 2) client gets authenticated, 3) if successful, then client is assigned all the usual DHCP stuff and becomes part of the network. What privileges this DHCP assigned network has, should be configurable of course with the usual routing/filtering methods. Am I asking for too much from the SRX for this kind of thing? Should I ditch the SRX for VPN and revert to an OpenVPN solution that I had working some time back also and was amazed at the ease of configuration, functionality and features?

  Read the article

• Why can't add a hot spare in freebsd? Can anybody help me fix it?

  - by hamlet

  Why can't add a hot spare? Can anybody help me fix it? mfiutil add e1:s1 mfid0 mfiutil: Drive 1 is not available My mfi status:: mfiutil show config mfi0 Configuration: 1 arrays, 1 volumes, 0 spares array 0 of 2 drives: drive 0 ( 137G) ONLINE <HITACHI HUS153014VLS300 A410 serial=JFWHSB4C> SAS enclosure 1, slot 0 drive 1 ( 137G) ONLINE <HITACHI HUS153014VLS300 A410 serial=JFWJ3AEC> SAS enclosure 1, slot 1 volume mfid0 (136G) RAID-1 64K OPTIMAL spans: array 0 mfiutil show events 1468 (boot + 25s/BATTERY/WARN) - Battery removed 1475 (boot + 52s/DRIVE/WARN) - PD 00(e1/s0) is not a certified drive 1478 (boot + 52s/DRIVE/WARN) - PD 01(e1/s1) is not a certified drive 1480 (boot + 64s/BATTERY/WARN) - BBU disabled; changing WB virtual disks to WT mfiutil show volumes mfi0 Volumes: Id Size Level Stripe State Cache Name mfid0 ( 136G) RAID-1 64K OPTIMAL Disabled

  Read the article

• Virtualhost setup, same IP address, different DirectoryIndex's

  - by kaykills

  I am trying to set up 2 virtual host entries in apache but I'm not sure how to accomplish what I want to do. I have two domain names, both pointing to the same IP Address. I need the DirectoryIndex to be different, which is pretty much the only difference in the entries. I have the following set up: <VirtualHost *:80> ServerName firstdomain.com ServerAdmin [email protected] DocumentRoot "/srv/www" DirectoryIndex /portals/site/index.html </VirtualHost> <VirtualHost *:80> ServerName seconddomain.com ServerAdmin [email protected] DocumentRoot "/srv/www" DirectoryIndex /portals/site/index_fr.html </VirtualHost> Not sure what I need to do differently but the second entry doesn't work. The only real difference is I need the second domain to point to a different DirectoryIndex. If there is a better way to accomplish this, your help would be appreciated.

  Read the article

• Redirecting to a folder

  - by RN

  Apache2 Plesk 9.x I have a website www.example.com and my blog is on www.example.com/blog I have no content on www.example.com as of now So I want all requests for example.com to be redirected to www.example.com/blog How should I do that ? Is this something I can do in Apache? I am using the GoDaddy DNS server. Not sure if it matters- but I have multiple domains hosted n the same server. And I am using Plesk to manage my virtual hosts.

  Read the article

• language input is changed by itself, not only by keystroke of alt+shift

  - by Berry Tsakala

  I'm using 2 and sometimes more input methods in windows I use ALT + left Shift for switching between languages. Sometimes, every once in a while, another action(s) trigger the language switch. It happens in the same application, (i.e. the input language changes for the same app without my request) or, while switching tasks with Alt-Tab, which causes language input to change in an arbitrary application's context. I realized that some of these actions could be the use of the scroll wheel button. It's super annoying How do I disable any other language switching, and stay only with alt+shift? Why does this happen? It happened to my in the past in these and more occasions: middle mouse click pressing Windows key pression Alt Tab (unknown)

  Read the article

• Free, Linux-based rescue CD for Windows machines

  - by Adam Matan

  Hi, Too often, I'm being called to help a friend who screwed a Windows machine by some creative methods. Th usual remedy is backing up the hard drive contents and reinstalling. Right now, this is done by removing the defected hard drive to my machine. I figured out that using a rescue disk running some version of Linux might ease the process. I'm looking for: NTFS access Partition tools Large variety of drivers (Network, Hard drives, etc.) GUI and some rescue wizards a great plus. Any ideas? Adam

  Read the article

• Log Files from bash script output

  - by neildeadman

  I have a script that runs (this works fine). I'd like to produce logfiles from its output and still show it on screen. I have this command that creates three files from this blog: ((./fk.sh 2>&1 1>&3 | tee errors.log) 3>&1 1>&2 | tee output.log) 2>&1 | tee final.log This does exactly what I want it to. My only issue is that I create files in my script and copy them somewhere, and I'd like to copy these logfiles there too, which I can't do whilst this script is running. I also wanted to make it easier for any user to run my script, so I created another script to run this script. According to this post (see last post) I can put a . before the script name and I can use variables assigned in my called script from the first script if I use them in the first. It doesn't seem to work though and I can't figure out why or find alternative methods. Can anyone help?

  Read the article

• esxi 5.1 - copy paste host config doesn't work?

  - by w--

  I followed these instructions for esxi 5.1 to enable copy paste from the host config. (search for "To enable this option for all the virtual machines in the ESX/ESXi host:") http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1026437 But copy and paste doesn't work for new VMs or existing VMs. Did I do something wrong somewhere? I've rebooted VMs and even rebooted host. I can confirm that if I do a per VM configuration, it works. Just not a central host config. Here is a screenshot of my /etc/vmware/config file

  Read the article

• Shared FC LVM VG with LVs for each KVM VM. Clvm required?

  - by Cocoabean

  I have 2 virtual machine hosts running Ubuntu 12.04 and KVM managed with libvirt. They are both connected to the same VG which is a LUN on my SAN over FC. I provision LVs on this shared VG for each VM. I don't think I need HA or failover, but I do want live migration between the hosts. Do I need clvm in this case? As long as I don't try to start the same VM on each host should this work? Clvm requires lots of overhead with clustering tools that I don't think I need. I can deal with manually restarting VMs on other hosts in the event of a hardware failure.

  Read the article

• Unable to open Synaptic manager, unable to install packages, what can I do?

  - by Omkant

  I have installed the sun java6-jdk package but it's not installed completely. After that it's giving an error when I try to install a new package. In terminal when I write "sudo apt-get install [any package name]" I get an error like this: E: could not get lock /var/lib/dpkg/lock -open (11 Resource temporable ) E: Unable to lock the administration directory (/var/lib/dpkg). Also Synaptic package manager is not opening and none of the packages are downloading through any of the methods I know. Please help!

  Read the article

• Configuring CentOS for Heavy-ish Traffic

  - by Jonathan Sampson

  New sysadmin here, managing a CentOS server. This past week has been one of the most exciting weeks of my career, and full of learning all sorts of new things. Today I have another task though, and that is to make sure our server can handle more than what our old shared-hosting was capable of. We were originally limited to 200 concurrent connections on our GoDaddy shared-hosting. Eventually we out-grew this (usually during campaigns/marketing events) and moved on to a Virtual Dedicated Server. I'm assuming the number of connections would be handled by Apache. What configurations should I be mindful of in order to allow more traffic in?

  Read the article

• Can I rely on S3 to keep my data secure?

  - by Jamie Hale

  I want to back up sensitive personal data to S3 via an rsync-style interface. I'm currently using s3cmd - a great tool - but it doesn't yet support encrypted syncs. This means that while my data is encrypted (via SSL) during transfer, it's stored on their end unencrypted. I want to know if this is a big deal. The S3 FAQ says "Amazon S3 uses proven cryptographic methods to authenticate users... If you would like extra security, there is no restriction on encrypting your data before storing it in Amazon S3." Why would I like extra security? Is there some way my buckets could be opened to prying eyes without my knowing? Or are they just trying to save you when you accidentally change your ACLs and make your buckets world-readable?

  Read the article

• Running a webserver behind a firewall I have no access to

  - by reijin

  I'm having a bad time in my student appartment: I want to run a webserver on my Laptop, which should be reachable from outside of the net. I'm sitting behind some proxy-server that passes outgoing packets to the matching server. But when it comes to incoming messages - it wouldn't route them correctly to my PC. (Seems like packets only get passed if some PC from within the student-flat is already connected to the sending server) In the past I had a small virtual private server that was sending incoming website-requests over a reverse shell to my PC. Which then returned the website content, and the visitor could see my website. Sadly I dont have that server anymore... Do you have any idea that might solve my problem? Greetings, Benedikt

  Read the article

• Is computer's DRAM size not as important once we get a Solid State Drive?

  - by Jian Lin

  I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more. Won't 2GB or 4GB be quite good if a Solid State Hard drive is used? I think the most worried thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with SDD drive, the problem is a lot less of a concerned? Is there a comparison as to, if DRAM speed is n, then SDD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

  Read the article

• Oracle Advanced Security Options is Blank

  - by mak4pi

  I just installed Oracle DB 10gR2 with Oracle Advanced Security, but cannot see the algorithms. [user@db-1] adapters Installed Oracle Net transport protocols are: IPC BEQ TCP/IP SSL RAW Installed Oracle Net naming methods are: Local Naming (tnsnames.ora) Oracle Directory Naming Oracle Host Naming Oracle Names Server Naming Installed Oracle Advanced Security options are: Where are all the algorithms for Oracle Advanced Security options please? I checked the $ORACLE_HOME/bin/adapters file and it's looking for naea256i, naemd5i, etc. in the naetab.so file, but none of these are listed in the naetab.so file. What's wrong with the naetab.so file? Thanks.

  Read the article

• Protecting Windows SMTP service against the spam

  - by MainMa

  Hi, I'm trying to use a Windows SMTP service on Windows Server 2008, but I can't understand how to secure it. Basically, if I open firewall for local network IPs only for %windir%\system32\inetsrv\inetinfo.exe and keep Connection and Relay settings of SMTP Virtual Server to "All except the list below" (with an empty list), a few minutes later I see spam appearing in Queue directory. (Why? Isn't firewall intended to block this?) Now, if I set Connection or Relay to "Only the list below", specifying the range of local IPs, I can't use the SMTP server nevermore (a "Unable to read data from the transport connection: net_io_connectionclosed." exception is thrown). So what is the way to get rid of spam from internet but let send mails from local network?

  Read the article

• How to make AD highly available for applications that use it as an LDAP service

  - by Beaming Mel-Bin

  Our situation We currently have many web applications that use LDAP for authentication. For this, we point the web application to one of our AD domain controllers using the LDAPS port (636). When we have to update the Domain Controller, this has caused us issues because one more web application could depend on any DC. What we want We would like to point our web applications to a cluster "virtual" IP. This cluster will consist of at least two servers (so that each cluster server could be rotated out and updated). The cluster servers would then proxy LDAPS connections to the DCs and be able to figure out which one is available. Questions For anyone that has had experience with this: What software did you use for the cluster? Any caveats? Or perhaps a completely different architecture to accomplish something similar?

  Read the article

• Web and email host migration - Limitations and suggestions to make the process as easy as possible.

  - by Jack Hickerson

  I developed a website for a friend of mine to replace his current 'all inclusive' provider (website creation, updating, web hosting, email hosting). I've already paid for a hosting service which currently houses the website which I have created. I need to cancel the previous service provider to get the domain migrated to the new host, however I will still need to transfer or recreate all of the email addresses that everyone in his company had previously. Is there an easy way migrate email accounts (still linked to the same domain) while migrating to a different host? Will any methods allow all users to retain their archived emails and folder structures? What is the process to do so. Because the current provider is a rather large website development and hosting company, I will have limited access to the data they have stored. As you can probably tell, my knowledge in this area is very limited - any/all suggestions you may have would be greatly appreciated. Thanks in advance. -Jack

  Read the article

• How to go about scheduling a task in windows 7 to change wireless connection

  - by Skindeep2366

  This may or not be something that can be done. I cannot find anything on the wireless connection manager built into windows 7 let alone methods for passing params into it. Problem is as follows: I have 2 wireless routers. One provides internet access, the other provides sole access to the local network. Every day at 4am the main system creates a backup in 2 locations. One is a External usb drive, the other is a location on the network. This is all cool if it is remembered to change over to the local network router before leaving. But if it is forgotten the roof will collapse, the walls will burn, and I will be... well you get the idea. Solution: there is already a custom event that fires a automated backup program at 4am everyday. I need someway to force the wireless network to use the correct connection at say 3:58am everyday. Any ideas????

  Read the article

< Previous Page | 458 459 460 461 462 463 464 465 466 467 468 469  | Next Page >