Search Results

Search found 21802 results on 873 pages for 'erx vb next coder'.

Page 463/873 | < Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >

• JMS Adapter Step 0 : Configuring the WLS-JMS resources

  - by [email protected]

  Before getting started with the JMS Adapter, we must configure the connection factories/JMS queues on the WLS admin console. In particular, we will be required to follow these stepsCreate a connection factory. In our case, we will create a "XA Connection Factory". This step is mandatory if you need your JMS queues to participate in a global transaction. Create the WLS JMS QueuesCreating the connection factory:1) Login to the WLS Admin console. On my setup, the url looks like "http://localhost:7001/console".2) Select Services -> Messaging -> JMS Modules -> SOAJMSModule as shown below. We can also create a new JMS Module, but, I took the easier way out by selecting the SOAJMSModule. 3) Click on "New" as shown in order to create the Connection factory.4) Select "Connection Factory" radio button and click "Next".5) Enter the Connection Factory properties as shown and click on "Finish".6) Target the connection factory to your managed server and click on "Finish". 7) Now, go back and select the Connection Factory that you've just created (see Step 2 above) . Click on "Transactions" and enable XA and click on "Save".

  Read the article

• Windows 7 not booting after installing Ubuntu 12.10

  - by Imran Choudhry

  I have Samsung sf511 with Windows 7 Home preinstalled. I installed Ubuntu 12.10 last night. First I mounted downloaded ubuntu 12.10 iso on a DVD from Windows 7, then I restarted, changed the boot option to DVD and let the Ubuntu DVD run. I selected "Install ubuntu alongside windows 7". In the next step I allocated the diskspace . Ubuntu installed perfectly and it ranned OK. I spent a good time exploring Ubuntu. When I restarted to start my work on Windows again and selected Windows 7 to boot, it showed blue screen after booting up (after logging in). I tried restarting several times but the same blue screen keep showing at the same point of bootup. I also restored windows to an earlier time. Left with no option I booted from Samsung provided windows recovery option. The recovery process ran fine but when it restarted to boot Windows for the first time all I see is a black screen. Nothing happens. It switches between dark command promt screen to a pitch black screen as if it's rebooting after every 10 seconds or so. The laptop can be booted from the DVD Drive or USB drive but is not booting from Harddisk. What should I do in order to use both Windows 7 and Ubuntu?

  Read the article

• Mission 26 Captures Endeavour’s Last Trip in Stop Motion

  - by Jason Fitzpatrick

  On September 21, 2012 the Space Shuttle Endeavour was delivered to the Los Angeles International Airport and spent the next three days being slowly transported 12 miles to the California Science Center. One dedicated team of photographers captured the whole thing. Lead by Matthew Givot, the group followed the shuttle for three straight days, photographing it around the clock. The Endeavor started on Thursday night and went on until Sunday night, with very little sleep to no sleep. The only thing that kept us going was pure love of the art and adrenaline. One thing that stood out the most for me, while I was shooting, was the people of Los Angeles. It was so powerful to see the excitement on peoples faces and the pride of their home town. No matter how many times I would see the Shuttle it would never get old. This has been an amazing experience that I will never forget. My hope is that this film will show you the amount of dedicated people and teamwork that it took to get the Endeavour to its new home. Enjoy. The end result of their labor is the above video, a beautiful time-lapse video of Endeavour’s journey from the airport to its hanger at the California Science Center. Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked

  Read the article

• What's up with LDoms: Part 1 - Introduction & Basic Concepts

  - by Stefan Hinker

  LDoms - the correct name is Oracle VM Server for SPARC - have been around for quite a while now.  But to my surprise, I get more and more requests to explain how they work or to give advise on how to make good use of them.  This made me think that writing up a few articles discussing the different features would be a good idea.  Now - I don't intend to rewrite the LDoms Admin Guide or to copy and reformat the (hopefully) well known "Beginners Guide to LDoms" by Tony Shoumack from 2007.  Those documents are very recommendable - especially the Beginners Guide, although based on LDoms 1.0, is still a good place to begin with.  However, LDoms have come a long way since then, and I hope to contribute to their adoption by discussing how they work and what features there are today.  In this and the following posts, I will use the term "LDoms" as a common abbreviation for Oracle VM Server for SPARC, just because it's a lot shorter and easier to type (and presumably, read). So, just to get everyone on the same baseline, lets briefly discuss the basic concepts of virtualization with LDoms.  LDoms make use of a hypervisor as a layer of abstraction between real, physical hardware and virtual hardware.  This virtual hardware is then used to create a number of guest systems which each behave very similar to a system running on bare metal:  Each has its own OBP, each will install its own copy of the Solaris OS and each will see a certain amount of CPU, memory, disk and network resources available to it.  Unlike some other type 1 hypervisors running on x86 hardware, the SPARC hypervisor is embedded in the system firmware and makes use both of supporting functions in the sun4v SPARC instruction set as well as the overall CPU architecture to fulfill its function. The CMT architecture of the supporting CPUs (T1 through T4) provide a large number of cores and threads to the OS.  For example, the current T4 CPU has eight cores, each running 8 threads, for a total of 64 threads per socket.  To the OS, this looks like 64 CPUs.  The SPARC hypervisor, when creating guest systems, simply assigns a certain number of these threads exclusively to one guest, thus avoiding the overhead of having to schedule OS threads to CPUs, as do typical x86 hypervisors.  The hypervisor only assigns CPUs and then steps aside.  It is not involved in the actual work being dispatched from the OS to the CPU, all it does is maintain isolation between different guests. Likewise, memory is assigned exclusively to individual guests.  Here,  the hypervisor provides generic mappings between the physical hardware addresses and the guest's views on memory.  Again, the hypervisor is not involved in the actual memory access, it only maintains isolation between guests. During the inital setup of a system with LDoms, you start with one special domain, called the Control Domain.  Initially, this domain owns all the hardware available in the system, including all CPUs, all RAM and all IO resources.  If you'd be running the system un-virtualized, this would be what you'd be working with.  To allow for guests, you first resize this initial domain (also called a primary domain in LDoms speak), assigning it a small amount of CPU and memory.  This frees up most of the available CPU and memory resources for guest domains.  IO is a little more complex, but very straightforward.  When LDoms 1.0 first came out, the only way to provide IO to guest systems was to create virtual disk and network services and attach guests to these services.  In the meantime, several different ways to connect guest domains to IO have been developed, the most recent one being SR-IOV support for network devices released in version 2.2 of Oracle VM Server for SPARC. I will cover these more advanced features in detail later.  For now, lets have a short look at the initial way IO was virtualized in LDoms: For virtualized IO, you create two services, one "Virtual Disk Service" or vds, and one "Virtual Switch" or vswitch.  You can, of course, also create more of these, but that's more advanced than I want to cover in this introduction.  These IO services now connect real, physical IO resources like a disk LUN or a networt port to the virtual devices that are assigned to guest domains.  For disk IO, the normal case would be to connect a physical LUN (or some other storage option that I'll discuss later) to one specific guest.  That guest would be assigned a virtual disk, which would appear to be just like a real LUN to the guest, while the IO is actually routed through the virtual disk service down to the physical device.  For network, the vswitch acts very much like a real, physical ethernet switch - you connect one physical port to it for outside connectivity and define one or more connections per guest, just like you would plug cables between a real switch and a real system. For completeness, there is another service that provides console access to guest domains which mimics the behavior of serial terminal servers. The connections between the virtual devices on the guest's side and the virtual IO services in the primary domain are created by the hypervisor.  It uses so called "Logical Domain Channels" or LDCs to create point-to-point connections between all of these devices and services.  These LDCs work very similar to high speed serial connections and are configured automatically whenever the Control Domain adds or removes virtual IO. To see all this in action, now lets look at a first example.  I will start with a newly installed machine and configure the control domain so that it's ready to create guest systems. In a first step, after we've installed the software, let's start the virtual console service and downsize the primary domain.  root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-c-- UART 512 261632M 0.3% 2d 13h 58m root@sun # ldm add-vconscon port-range=5000-5100 \ primary-console primary root@sun # svcadm enable vntsd root@sun # svcs vntsd STATE STIME FMRI online 9:53:21 svc:/ldoms/vntsd:default root@sun # ldm set-vcpu 16 primary root@sun # ldm set-mau 1 primary root@sun # ldm start-reconf primary root@sun # ldm set-memory 7680m primary root@sun # ldm add-config initial root@sun # shutdown -y -g0 -i6 So what have I done: I've defined a range of ports (5000-5100) for the virtual network terminal service and then started that service.  The vnts will later provide console connections to guest systems, very much like serial NTS's do in the physical world. Next, I assigned 16 vCPUs (on this platform, a T3-4, that's two cores) to the primary domain, freeing the rest up for future guest systems.  I also assigned one MAU to this domain.  A MAU is a crypto unit in the T3 CPU.  These need to be explicitly assigned to domains, just like CPU or memory.  (This is no longer the case with T4 systems, where crypto is always available everywhere.) Before I reassigned the memory, I started what's called a "delayed reconfiguration" session.  That avoids actually doing the change right away, which would take a considerable amount of time in this case.  Instead, I'll need to reboot once I'm all done.  I've assigned 7680MB of RAM to the primary.  That's 8GB less the 512MB which the hypervisor uses for it's own private purposes.  You can, depending on your needs, work with less.  I'll spend a dedicated article on sizing, discussing the pros and cons in detail. Finally, just before the reboot, I saved my work on the ILOM, to make this configuration available after a powercycle of the box.  (It'll always be available after a simple reboot, but the ILOM needs to know the configuration of the hypervisor after a power-cycle, before the primary domain is booted.) Now, lets create a first disk service and a first virtual switch which is connected to the physical network device igb2. We will later use these to connect virtual disks and virtual network ports of our guest systems to real world storage and network. root@sun # ldm add-vds primary-vds root@sun # ldm add-vswitch net-dev=igb2 switch-primary primary You are free to choose whatever names you like for the virtual disk service and the virtual switch.  I strongly recommend that you choose names that make sense to you and describe the function of each service in the context of your implementation.  For the vswitch, for example, you could choose names like "admin-vswitch" or "production-network" etc. This already concludes the configuration of the control domain.  We've freed up considerable amounts of CPU and RAM for guest systems and created the necessary infrastructure - console, vts and vswitch - so that guests systems can actually interact with the outside world.  The system is now ready to create guests, which I'll describe in the next section. For further reading, here are some recommendable links: The LDoms 2.2 Admin Guide The "Beginners Guide to LDoms" The LDoms Information Center on MOS LDoms on OTN

  Read the article

• Installing an EC2 (EBS based) instance on another AWS account

  - by imaginative

  We're moving from one AWS account to another. I have a couple of EC2 instances I would like to move over. These instances are EBS based. Googling around, I'm seeing all sorts of convoluted answers for how to appropriately launch this EBS based instance on a new account. Surely there has to be a simple way of going about this. As of right now, what I have done so far is backup the EB2 Volume as a snapshot. I then altered the permissions of the snapshot to allow the new AWS account number to be able to access it. I am not sure where to go from here. Do I have to create an image from the EBS snapshot? Upload it to S3? What's the next step(s)?

  Read the article

• SQL Server 2005 to 2008 upgrade - are MDF files binary compatible?

  - by james

  I have 50 databases on a MS SQL Server 2005 system and want to upgrade to MS SQL Server 2008. This is what I tried on some test machines: 1. copied the \DATA directory from the source (MSSQL 2005) to exactly the same path on the target (MSSQL 2008) server. 2. edited the startup parameters on the MSSQL 2008 service to point to the path of the MSSQL 2005 master database. 3. restarted MSSQL service It worked and I can access all databases, tables and data. My questions are: I go back to SQL Server 4.2 and it has never been this easy. I know it worked, but should have it worked? Am I missing something, or is there going to be a gotcha next week? These are simple databases, with just tables, views and indexes. No cross database links, no triggers etc

  Read the article

• MSCC: Purpose and benefits of Version Control Systems (VCS)

  You're working in IT and not using any kind of version control system? Sorry, then you're doing something wrong! RSVP for MSCC meetup of June This month's meetup will be an introduction into the mechanics of version control systems (VCS) like git, Mercurial, TFS, and others in general. VCS are not optional but compulsory in any area of IT. Whether you're developing source code for the next buzz app, writing SQL scripts for your database, or automating your administrative tasks with shell scripts it's better to have a "time machine" in order to keep multiple version, stay organised and leverage the power of differences. git - a modern approach to VCS - Nayar Nayar is going to give us a brief overview of the basic principles of working with git. Which are the necessary steps to get started and which are the usual commands in order to get the most out of git. Visual Studio Online (VSO) - Jochen Are you mainly rooted on the Windows platform and looking for a good alternative to Team Foundation Services (TFS), then VSO might give you hand at achieving this. Similar to git VSO is an open infrastructure but plays very well together with the Microsoft Azure cloud infrastructure. Recent and upcoming events in Mauritius Let's have a chat about recent events like WebCup 2014 or Emtel Knowledge Series and have a head start on upcoming events like Code Challenge, and others to come. Networking and general discussions Of course, there will be plenty of time to chat and exchange with other like-minded craftsmen. Bring your topics and discuss various issues with other professionals. Share your experience and use the ability to learn from others. Looking forward to meet soon.

  Read the article

• Unable to SSH into EC2 instance on Fedora 17

  - by abhishek

  I did following steps But I am not able to SSH to it(Same steps work fine on Fedora 14 image). I am getting Permission denied (publickey,gssapi-keyex,gssapi-with-mic) I created new instance using fedora 17 amazon community image(ami-2ea50247). I copied my ssh keys under /home/usertest/.ssh/ after creating a usertest I have SELINUX=disabled here is Debug info: $ ssh -vvv ec2-54-243-101-41.compute-1.amazonaws.com ssh -vvv ec2-54-243-101-41.compute-1.amazonaws.com OpenSSH_5.2p1, OpenSSL 1.0.0b-fips 16 Nov 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ec2-54-243-101-41.compute-1.amazonaws.com [54.243.101.41] port 22. debug1: Connection established. debug1: identity file /home/usertest/.ssh/identity type -1 debug1: identity file /home/usertest/.ssh/id_rsa type -1 debug3: Not a RSA1 key file /home/usertest/.ssh/id_dsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'Proc-Type:' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'DEK-Info:' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/usertest/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 131/256 debug2: bits set: 506/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /home/usertest/.ssh/known_hosts debug3: check_host_in_hostfile: match line 17 debug3: check_host_in_hostfile: filename /home/usertest/.ssh/known_hosts debug3: check_host_in_hostfile: match line 17 debug1: Host 'ec2-54-243-101-41.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /home/usertest/.ssh/known_hosts:17 debug2: bits set: 500/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/usertest/.ssh/identity ((nil)) debug2: key: /home/usertest/.ssh/id_rsa ((nil)) debug2: key: /home/usertest/.ssh/id_dsa (0x7f904b5ae260) debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic debug3: preferred gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup gssapi-with-mic debug3: remaining preferred: publickey,keyboard-interactive,password debug3: authmethod_is_enabled gssapi-with-mic debug1: Next authentication method: gssapi-with-mic debug3: Trying to reverse map address 54.243.101.41. debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information debug2: we did not send a packet, disable method debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/usertest/.ssh/identity debug3: no such identity: /home/usertest/.ssh/identity debug1: Trying private key: /home/usertest/.ssh/id_rsa debug3: no such identity: /home/usertest/.ssh/id_rsa debug1: Offering public key: /home/usertest/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

  Read the article

• Silverlight Cream for May 30, 2010 -- #873

  - by Dave Campbell

  In this Issue: Matthias Shapiro, Colin Blair(-2-), Mike Snow, Marlon Grech, Victor Gaudioso. Shoutout: If you're going to be anywhere near Mission Viejo, California on June 19th, set your calendar for this Victor Gaudioso event: New Speaking Event: Microsoft Book Signing/Silverlight 4 Presentation SilverLaw has another example of his Flexible surface app up: Drag & Drop Flexible Surface - Silverlight 4 From SilverlightCream.com: Silverlight 4 Binding and StringFormat in XAML Matthias Shapiro has a discussion posted about StringFormat binding in Silverlight 4 ... he dug in hard on this... well worth a read. View Model Collection Properties for WCF RIA Services Colin Blair is discussing some possibilities for exposing collections of entities from the ViewModel... his favorite: PagedCollectionView. The next post discusses this deeper. Advanced Paged Collection View Colin Blair continues in more depth on the PagedCollectionView, this time handling paging, sorting, and multiple loads. Silverlight Tip of the day #25 – Detecting Validation Errors on Submit Mike Snow's latest Tip of the Day is up and is about validation - specifically validating after your user has pressed "OK" INotifyPropertyChanged… I am fed up of handling events just to know when a property changed Marlon Grech has an Rx-less solution to code notifications of properties changing... this is a WPF and Silverlight solution and all the code is downloadable. New Silverlight Video Tutorial: How to Add Multiple BitmapEffects to One Object Victor Gaudioso's latest outing is in response to a query from a reader and is a video tutorial showing how to add multiple bitmap effects to one object. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• TFS 2010 Server Name Change

  - by PearlFactory

  So I thought I would  change the name of my machine so that the other devs can find the TFS server easily. TFS 2005 would use the cool cmd line util tfsadminutil.....alas he is now gone HERE Are the steps to complete Edit the web.config and is usually located on default install C:\Program Files\Microsoft Team Foundation Server 2010\Application Tier\Web Services\web.config <add key="applicationDatabase" value="Data Source=JUSTIN\SQLI01;Initial Catalog=Tfs_Configuration;Integrated Security=True;" /> Next step is to edit previous Solutions/Projects 1) Open the Solution file i.e ProductApp.sln 2) Edit the SccTeamFoundationServer URL under Global section i.e Change this to new name   If you have DB server on same machine ...you will need to go in and remove existing db user account assigned to the tfs DB Remove old [%machine_name%] value i.e Tuned_Dev_PC_12\Justin user from the above DBs No add the new Justin\Justin user account associated with the new machine name to the TFS & Reporing dbs ... dbo or the TFSADMIN & TFSEXEC roles either will do in this case. (or add both ) Now either ReApply user or add New account (remove old account i.e Tuned_Dev_PC_12\justin) If DB permisions are setup correctyly you will get a screen that looks like this   If it pauses or gets stuck you need to look back at the adding correct DB Perms to the i.e JUSTIN\Justin user account Also if your project is still complaining about old TFS name 1) Team\Connect new Team Foundation Server 2) Add\Remove TFS 3) Add New TFS Name  Once you have connected to the new TFS server Reload your project from TFS..this way it removes a lot of the bugs that hang around in the local project\solution This is similar to a VSS2005 and older fix Cheers ( eta about 60-90 mins so weigh up the the need vs payoff. ) Shutdown restart

  Read the article

• Git: Fixing a bug affecting two branches

  - by Aram Kocharyan

  I'm basing my Git repo on http://nvie.com/posts/a-successful-git-branching-model/ and was wondering what happens if you have this situation: Say I'm developing on two feature branches A and B, and B requires code from A. The X node introduces an error in feature A which affects branch B, but this is not detected at node Y where feature A and B were merged and testing was conducted before branching out again and working on the next iteration. As a result, the bug is found at node Z by the people working on feature B. At this stage it's decided that a bugfix is needed. This fix should be applied to both features, since the people working on feature A also need the bug fixed, since its part of their feature. Should a bugfix branch be created from the latest feature A node (the one branching from node Y) and then merged with feature A? After which both features are merged into develop again and tested before branching out? The problem with this is that it requires both branches to merge to fix the issue. Since feature B doesn't touch code in feature A, is there a way to change the history at node Y by implementing the fix and still allowing the feature B branch to remain unmerged yet have the fixed code from feature A? Mildly related: Git bug branching convention

  Read the article

• Amit Jasuja's Session at Gartner IAM with Ranjan Jain of Cisco

  - by Naresh Persaud

  If you did not get a chance to attend Amit Jasuja's session at Gartner IAM this week in Las Vegas, here is a summary of the session and a copy of the slides. The agenda featured an introduction by Ray Wagner, Managing VP at Gartner, followed by Amit discussing the trends in Identity and Access Management shaping Oracle's strategy. Today we are seeing the largest re-architecture in a decade. Every business from manufacturing to retail is transforming the way they do business. Manufacturing companies are becoming manufacturing services companies. Retail organizations are embracing social retail. Healthcare is being delivered on-line around the clock. Identity Management is at the center of the transformation. Whether you are Toyota embracing a social network for cars or launching the next Iphone, the Identity of the user provides context to enable the interaction and secure the experience. All of these require greater attention to the context of the user and externalizing applications for customers and employees.  Ranjan discussed how Cisco is transforming  by integrating 1800 applications to a single access management framework and consolidating 3M users across 4 data centers to support internal and external processes. David Lee demonstrated how to use Oracle Access Manager 11g R2 on a mobile application to sign-on across multiple applications while connecting mobile applications to a single access control policy.

  Read the article

• Unable to SSH to EC2

  - by Walker

  I downloaded the cert-xxx.pem and pk-xxx.pem files and also the keypair.pem and moved it all to the /.ssh folder on my Ubuntu client machine. this is what I get when I try to SSH with -v at the end debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /root/.ssh/identity debug1: Trying private key: /root/.ssh/id_rsa debug1: Trying private key: /root/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). I am new to administering servers and I want to know if I should be trying to convert the pem files to id_rsa and id_dsa. I am not really sure if that is possible but I don't know how else to get the id_rsa, id_dsa from those pem files or if there is any work around. I managed to get access to EC2 the first time and this is my second try and I am unsuccessful so far. Any help is appreciated. regards Walker

  Read the article

• Uganda .NET Usergroup meeting (February 2010)

  - by Malisa L. Ncube

  We had a very interesting .NET meeting in which i gave a short presentation on the new features of .NET 4.0 and Visual Studio 2010. The main presentation came from Jake Markhus @jmarkhus who talked about NHibernate (http://nhforge.org).   The membership for the group is growing each time we meet and its very encouraging. Some employers found candidates within our group for hiring, and this has resulted in a mutual benefit between the employers and job-seekers – really cool stuff.   Jake above giving us the soup and nuts of NHibernate. We were very excited since a number companies decided to support us in many ways. Some members won the licenses for Telerik Suite (http://www.telerik.com) while Intellisense LTD (http://www.intellisense.co.ug) agreed to sponsor us on domain registration and hosting of the community site. Jake announced on the possibility of having DevExpress (http://www.devexpress.com) sponsor us on 2 licenses of CodeRush http://www.devexpress.com/coderush which would be won in the next meeting raffle. I (@malisancube) would like to thank all the companies and individuals who have decided to sponsor us as a community of developers. We appreciate your support very much. You can download the presentations here Jan 2010 “VS2010 and NET 4.0” by Malisa Ncube. Feb 2010 “Using NHibernate” by Jake Markhus   Technorati Tags: Uganda .NET Usergroup,.NET 4.0,Community,NHibernate

  Read the article

• Event-based server-gameloop in a server based game

  - by Chris

  I know that this site is full of questions about fixed gameloops and variable gameloops and different types of threading. But I coult find barely nothing that is related to server loops. The server has no screen to draw on. It could just run as fast as possible, but of course this makes no sense. But should it really use single "ticks" and send the updates periodically after each tick and wait for the next "tick" to update its state. Is it applicable to replace the gameloop by multilpe events? Suchs as incoming network traffic or timers? I often heared that a gameloop should be determistic, but does it really matter? For instance, when you play a shooter game against humand players and/or AI you proably would never be ably to repeat the same input twice. Is it a good idea to lose determistic behavior if it is nearly impossible to reprodruce the same input twice? So this question is more or less about whether an strictly event-based gameloop is adviseable or not and what are the pros and cons. I could imagene that an event-based gameloop could perform much faster and smoother, since you don't have bug CPU-spikes during the beginning of a new "tick". The fact that I could not find much about an event-based gameloop for servers leads me to the conclusion that inefficient or too complicated to get a real benefit from it. I'm sure if this is enough to get an idea from what I'm interessted to know, but I hope so.

  Read the article

• Communicator Messages not being saved to Outlook due to Outlook Integration error

  - by Mark Rogers

  For the most part my Office Communicator appears to be configured correctly. I can login to my work account and see the work contact list. Outlook is working perfectly had a weird profile problem initially but that was fixed. Unfortunately, even though I have set the setting that says: Save my instant message conversations in the Outlook Conversation History folder. My conversations have stopped saving to the Outlook Conversation History folder. Also I have a yellow warning message on top of the server icon next to the status field. When I hover or click on the message, it says there is an Outlook Integration Error. The administrator is having trouble figuring out what is causing it. What can cause Outlook Integration Errors in Communicator and how do I go about trouble shooting them?

  Read the article

• Blogger.com kills FTP

  - by Daniel Moth

  History (you can safely ignore) Back in 2002 I came across some (almost) free Linux/Apache space and set up my first manually-created HTML-based home page, which still exists: http://www.danielmoth.com/. In 2004 I wanted to have a blog that would be hosted on a sub-folder of my domain, and at the same time I did not want to mess with setting up a blog engine myself. I found the perfect solution in blogger.com, which offered a web interface for creating blog posts (and managing the pages' template) and it would then use FTP to upload HTML pages to my space (no server-side programming/installation required at all)! FTP feature dropped by blogger.com Unfortunately, along the way Google purchased blogger.com and a couple of months ago they announced that they decided to kill the FTP feature, and they are forcing customers using that feature to have their content hosted (in an opaque way) on Google's servers. Even though I prefer having my content on my own space, I would have considered moving it to Google's servers if I could host my blog in a sub-folder and preserve my full blog URL: http://www.danielmoth.com/Blog/ (including my home pages being hosted at the root of the domain). Sadly, that is not possible. What now So I decided to move my blog somewhere else. I'll document on the next few posts how I did that (inc. a tool I wrote) in case it helps someone else in the same situation and also as a reminder to me if I need to do something like this again in the future. Comments about this post welcome at the original blog.

  Read the article

• How would I setup reverse DNS for 2 email servers?

  - by Solignis

  I have an interesting DNS question (well interesting to me atleast). I just installed an hmail server in our remote office to act as an MX backup in the event our exchange server goes down. The 2 host names are mail.campbellsurvey.com mail2.campbellsurvey.com mail points to the address 98.XXX.91.XXX mail2 points to the address 70.XXX.190.XXX How would I setup a PTR record on the ISP end to reflect both hostnames? Does the PTR have to point to EXACTLY mail.campbellsurvey.com or can it point to just campbellsurvey.com? because right now anything passing through the primary static address in our pool (the one used for standard internet) is identified as mail.campbellsurvey.com. My only idea to fix this was to move the mail server to the next available address and give it only it the name mail.campbellsurvey.com but I wanted to see if there was another way. Thanks in advance.

  Read the article

• Big Data – Learning Basics of Big Data in 21 Days – Bookmark

  - by Pinal Dave

  Earlier this month I had a great time to write Bascis of Big Data series. This series received great response and lots of good comments I have received, I am going to follow up this basics series with further in-depth series in near future. Here is the consolidated blog post where you can find all the 21 days blog posts together. Bookmark this page for future reference. Big Data – Beginning Big Data – Day 1 of 21 Big Data – What is Big Data – 3 Vs of Big Data – Volume, Velocity and Variety – Day 2 of 21 Big Data – Evolution of Big Data – Day 3 of 21 Big Data – Basics of Big Data Architecture – Day 4 of 21 Big Data – Buzz Words: What is NoSQL – Day 5 of 21 Big Data – Buzz Words: What is Hadoop – Day 6 of 21 Big Data – Buzz Words: What is MapReduce – Day 7 of 21 Big Data – Buzz Words: What is HDFS – Day 8 of 21 Big Data – Buzz Words: Importance of Relational Database in Big Data World – Day 9 of 21 Big Data – Buzz Words: What is NewSQL – Day 10 of 21 Big Data – Role of Cloud Computing in Big Data – Day 11 of 21 Big Data – Operational Databases Supporting Big Data – RDBMS and NoSQL – Day 12 of 21 Big Data – Operational Databases Supporting Big Data – Key-Value Pair Databases and Document Databases – Day 13 of 21 Big Data – Operational Databases Supporting Big Data – Columnar, Graph and Spatial Database – Day 14 of 21 Big Data – Data Mining with Hive – What is Hive? – What is HiveQL (HQL)? – Day 15 of 21 Big Data – Interacting with Hadoop – What is PIG? – What is PIG Latin? – Day 16 of 21 Big Data – Interacting with Hadoop – What is Sqoop? – What is Zookeeper? – Day 17 of 21 Big Data – Basics of Big Data Analytics – Day 18 of 21 Big Data – How to become a Data Scientist and Learn Data Science? – Day 19 of 21 Big Data – Various Learning Resources – How to Start with Big Data? – Day 20 of 21 Big Data – Final Wrap and What Next – Day 21 of 21 Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• C#: My World Clock

  - by Bruce Eitman

  [Placeholder:  I will post the entire project soon] I have been working on cleaning my office of 8 years of stuff from several engineers working on many projects.  It turns out that we have a few extra single board computers with displays, so at the end of the day last Friday I though why not create a little application to display the time, you know, a clock.  How difficult could that be?  It turns out that it is quite simple – until I decided to gold plate the project by adding time displays for our offices around the world. I decided to use C#, which actually made creating the main clock quite easy.   The application was simply a text box and a timer.  I set the timer to fire a couple of times a second, and when it does use a DateTime object to get the current time and retrieve a string to display. And I could have been done, but of course that gold plating came up.   Seems simple enough, simply offset the time from the local time to the location that I want the time for and display it.    Sure enough, I had the time displayed for UK, Italy, Kansas City, Japan and China in no time at all. But it is October, and for those of us still stuck with Daylight Savings Time, we know that the clocks are about to change.   My first attempt was to simply check to see if the local time was DST or Standard time, then change the offset for China.  China doesn’t have Daylight Savings Time. If you know anything about the time changes around the world, you already know that my plan is flawed – in a big way.   It turns out that the transitions in and out of DST take place at different times around the world.   If you didn’t know that, do a quick search for “Daylight Savings” and you will find many WEB sites dedicated to tracking the time changes dates, and times. Now the real challenge of this application; how do I programmatically find out when the time changes occur and handle them correctly?  After a considerable amount of research it turns out that the solution is to read the data from the registry and parse it to figure out when the time changes occur. Reading Time Change Information from the Registry Reading the data from the registry is simple, using the data is a little more complicated.  First, reading from the registry can be done like:             byte[] binarydata = (byte[])Registry.GetValue("HKEY_LOCAL_MACHINE\\Time Zones\\Eastern Standard Time", "TZI", null);   Where I have hardcoded the registry key for example purposes, but in the end I will use some variables.   We now have a binary blob with the data, but it needs to be converted to use the real data.   To start we will need a couple of structs to hold the data and make it usable.   We will need a SYSTEMTIME and REG_TZI_FORMAT.   You may have expected that we would need a TIME_ZONE_INFORMATION struct, but we don’t.   The data is stored in the registry as a REG_TZI_FORMAT, which excludes some of the values found in TIME_ZONE_INFORMATION.     struct SYSTEMTIME     {         internal short wYear;         internal short wMonth;         internal short wDayOfWeek;         internal short wDay;         internal short wHour;         internal short wMinute;         internal short wSecond;         internal short wMilliseconds;     }       struct REG_TZI_FORMAT     {         internal long Bias;         internal long StdBias;         internal long DSTBias;         internal SYSTEMTIME StandardStart;         internal SYSTEMTIME DSTStart;     }   Now we need to convert the binary blob to a REG_TZI_FORMAT.   To do that I created the following helper functions:         private void BinaryToSystemTime(ref SYSTEMTIME ST, byte[] binary, int offset)         {             ST.wYear = (short)(binary[offset + 0] + (binary[offset + 1] << 8));             ST.wMonth = (short)(binary[offset + 2] + (binary[offset + 3] << 8));             ST.wDayOfWeek = (short)(binary[offset + 4] + (binary[offset + 5] << 8));             ST.wDay = (short)(binary[offset + 6] + (binary[offset + 7] << 8));             ST.wHour = (short)(binary[offset + 8] + (binary[offset + 9] << 8));             ST.wMinute = (short)(binary[offset + 10] + (binary[offset + 11] << 8));             ST.wSecond = (short)(binary[offset + 12] + (binary[offset + 13] << 8));             ST.wMilliseconds = (short)(binary[offset + 14] + (binary[offset + 15] << 8));         }             private REG_TZI_FORMAT ConvertFromBinary(byte[] binarydata)         {             REG_TZI_FORMAT RTZ = new REG_TZI_FORMAT();               RTZ.Bias = binarydata[0] + (binarydata[1] << 8) + (binarydata[2] << 16) + (binarydata[3] << 24);             RTZ.StdBias = binarydata[4] + (binarydata[5] << 8) + (binarydata[6] << 16) + (binarydata[7] << 24);             RTZ.DSTBias = binarydata[8] + (binarydata[9] << 8) + (binarydata[10] << 16) + (binarydata[11] << 24);             BinaryToSystemTime(ref RTZ.StandardStart, binarydata, 4 + 4 + 4);             BinaryToSystemTime(ref RTZ.DSTStart, binarydata, 4 + 16 + 4 + 4);               return RTZ;         }   I am the first to admit that there may be a better way to get the settings from the registry and into the REG_TXI_FORMAT, but I am not a great C# programmer which I have said before on this blog.   So sometimes I chose brute force over elegant. Now that we have the Bias information and the start date information, we can start to make sense of it.   The bias is an offset, in minutes, from local time (if already in local time for the time zone in question) to get to UTC – or as Microsoft defines it: UTC = local time + bias.  Standard bias is an offset to adjust for standard time, which I think is usually zero.   And DST bias is and offset to adjust for daylight savings time. Since we don’t have the local time for a time zone other than the one that the computer is set to, what we first need to do is convert local time to UTC, which is simple enough using:                 DateTime.Now.ToUniversalTime(); Then, since we have UTC we need to do a little math to alter the formula to: local time = UTC – bias.  In other words, we need to subtract the bias minutes. I am ahead of myself though, the standard and DST start dates really aren’t dates.   Instead they indicate the month, day of week and week number of the time change.   The dDay member of SYSTEM time will be set to the week number of the date change indicating that the change happens on the first, second… day of week of the month.  So we need to convert them to dates so that we can determine which bias to use, and when to change to a different bias.   To do that, I wrote the following function:         private DateTime SystemTimeToDateTimeStart(SYSTEMTIME Time, int Year)         {             DayOfWeek[] Days = { DayOfWeek.Sunday, DayOfWeek.Monday, DayOfWeek.Tuesday, DayOfWeek.Wednesday, DayOfWeek.Thursday, DayOfWeek.Friday, DayOfWeek.Saturday };             DateTime InfoTime = new DateTime(Year, Time.wMonth, Time.wDay == 1 ? 1 : ((Time.wDay - 1) * 7) + 1, Time.wHour, Time.wMinute, Time.wSecond, DateTimeKind.Utc);             DateTime BestGuess = InfoTime;             while (BestGuess.DayOfWeek != Days[Time.wDayOfWeek])             {                 BestGuess = BestGuess.AddDays(1);             }             return BestGuess;         }   SystemTimeToDateTimeStart gets two parameters; a SYSTEMTIME and a year.   The reason is that we will try this year and next year because we are interested in start dates that are in the future, not the past.  The function starts by getting a new Datetime with the first possible date and then looking for the correct date. Using the start dates, we can then determine the correct bias to use, and the next date that time will change:             NextTimeChange = StandardChange;             CurrentBias = TimezoneSettings.Bias + TimezoneSettings.DSTBias;             if (DSTChange.Year != 1 && StandardChange.Year != 1)             {                 if (DSTChange.CompareTo(StandardChange) < 0)                 {                     NextTimeChange = DSTChange;                     CurrentBias = TimezoneSettings.StdBias + TimezoneSettings.Bias;                 }             }             else             {                 // I don't like this, but it turns out that China Standard Time                 // has a DSTBias of -60 on every Windows system that I tested.                 // So, if no DST transitions, then just use the Bias without                 // any offset                 CurrentBias = TimezoneSettings.Bias;             }   Note that some time zones do not change time, in which case the years will remain set to 1.   Further, I found that the registry settings are actually wrong in that the DST Bias is set to -60 for China even though there is not DST in China, so I ignore the standard and DST bias for those time zones. There is one thing that I have not solved, and don’t plan to solve.  If the time zone for this computer changes, this application will not update the clock using the new time zone.  I tell  you this because you may need to deal with it – I do not because I won’t let the user get to the control panel applet to change the timezone. Copyright © 2012 – Bruce Eitman All Rights Reserved

  Read the article

• The User Profile Service

  - by Daryl Gill

  I tried logging into my computer after an "ungraceful" shutdown due to a power cut.. I got prompted with a message stating the user profile service failed the login. After reading a k/b on Microsoft I managed to re-login to the "corrupt" account by making registery edits.. But the next step (After having the ability to logon) is a major concern for me.. Would the guys at superuser suggest: 1) Carry on using said account 2) Re-install Windows to eliminate the possible chance of a reoccouring problem 3) Migrate all user data over to a new account and with that being said above. I had to issue the command line: net user administrator /active:yes to activate the hidden adminstrator account, would it be recommended/secure to disable the account or leave it active?

  Read the article

• Render rivers in a grid.

  - by Gabriel A. Zorrilla

  I have created a random height map and now i want to create rivers. I've made an algorithm based on a* to make rivers flow from peaks to sea and now i'm in the quest of figuring out an elegant algorithm to render them. It's a 2D, square, mapgrid. The cells which the river pases has a simple integer value with this form :rivernumber && pointOrder. Ie: 10, 11, 12, 13, 14, 15, 16...1+N for the first river, 20,21,22,23...2+N for the second, etc. This is created in the map grid generation time and it's executed just once, when the world is generated. I wanted to treat each river as a vector, but there is a problem, if the same river has branches (because i put some noise to generate branches), i can not just connect the points in order. The second alternative is to generate a complex algorithm where analizes each point, checks if the next is not a branch, if so trigger another algorithm that take care of the branch then returns to the main river, etc. Very complex and inelegant. Perhaps there is a solution in the world generation algorithm or in the river rendering algorithm that is commonly used in these cases and i'm not aware of. Any tips? Thanks!!

  Read the article

• FREE Online Azure Workshop includes a **FREE Azure Account**

  - by Jim Duffy

  My friend and all around good guy, Microsoft Developer Evangelist for the Carolinas, Brian Hitney, along with fellow Microsofties Jim O’Neil and John McClelland will be presenting a FREE Windows Azure online workshop tomorrow, Tuesday, May 4th from 7pm-9pm. What? You can’t make it Tuesday evening? Not to worry. This webcast will be repeated again a number of times over the next month or so. Taken from Brian’s blog post about it: “Elevate your skills with Windows Azure in this hands-on workshop! In this event we’ll guide you through the process of building and deploying a large scale Azure application. Forget about “hello world”! In less than two hours we’ll build and deploy a real cloud app that leverages the Azure data center and helps make a difference in the world. Yes, in addition to building an application that will leave you with a rock-solid understanding of the Azure platform, the solution you deploy will contribute back to Stanford’s Folding@home distributed computing project. There’s no cost to you to participate in this session; each attendee will receive a temporary, self-expiring, full-access account to work with Azure for a period of 2-weeks.” Did you catch that last sentence??  “each attendee will receive a temporary, self-expiring, full-access account to work with Azure for a period of 2-weeks.” A FREE, full-access, Windows Azure account to experiment and learn with? Now we’re talking. For more information check out Brian’s blog post or head here. Have a day. :-|

  Read the article

• Easy BCD Help: Dual boot Win7 and Ubuntu 11.10 -- "Add new Entry" for Ubuntu

  - by Bradley Peterson

  I first had Ubuntu 11.10 installed on a single partition on my 750GB hard drive. I then partitioned the hard drive to 500GB (for Ubuntu) in ext4 format (what it already was from the clean install of Ubuntu)....and 250GB for Win7 in NFTS format. Then I installed Win7 onto that 250GB partition. Installation went smoothly and I was successfully booted into Win7 and setting everything up. After I was done doing all the stupid updates from Microsof, I thought I was done and I wanted to go back to Ubuntu. This is where the problem starts Of course I reboot and it goes directly to Win7. I research and find that Win7 has overwritten the Ubuntu bootloader, etc etc.. I don't fully understand it. I download EasyBCD 2.1.2 In EasyBCD, I select "Add New Entry" and select "Linux/BSD" and change the type to "GRUB 2" and name it "Ubuntu" Next, I go to "BCD Deployment" and select "Install the Windows Vista/7 bootloader to the MBR" and click "Write MBR" I reboot, select "Ubuntu" and the purple screen comes up, but NOTHING HAPPENS. If I hit Ctrl+Alt+Del, it goes to the Login menu where it acts normal for about 10-15 seconds, then freezes. It does this repeatedly every time. MY QUESTION: What's wrong here? Why can't I load Ubuntu now? Am I going to have to reinstall Ubuntu with Windows, then set up the bootloader with EasyBCD instead of Ubuntu, THEN Win7? Any and all help is appreciated! -Brad

  Read the article

• Ubuntu backlight problem with Nvidia graphics

  - by Vladimir

  I have a laptop mySN QMG6 / Chiligreen Mobilitas NW which is Quanta TW9 barebone with intel i3 and nvidia 335m GT onboard. On ubuntu distros 10.04, 10.10, 11.04 and 11.10 i had problem with changing screen backlight with nouveau and nvidia drivers. FN+F4/F5 buttons did not change my brightness. I tried to edit xorg.conf, adding Option “RegistryDwords” “EnableBrightnessControl=1? Also tried to add some lines to grug acpi_osi="Linux" acpi_backlight=vendor Neither worked for me. Today I installed Ubuntu 12.04 beta2 and... With nouveau driver my FN key works, and changes the brightness (is it a new 3.0.22 linux kernel, or patched nouveau driver, i don't know). This is a big step forward. But, when installing proprietary nvidia driver (295.33) FN button stops working and i can't change brightness. I also tried workaround with xorg and grub with no result. Tried to install acpi from apt - no result. Is there anything left to try? I really need that nvidia driver working with FN keys, as i would like to have a working 3D acceleration. P.S. Does the nouveau driver has 3d acceleration like nvidia drivers??? If there is need to provide some log data, please write what should i print, as i'm a bit new to Ubuntu. P.P.S. Same problems i had with other Linux distros (Mint, Fedora and others) P.P.P.S. Other FN buttons work with both drivers (Mute, VOL UP/DOWN, WiFi on/off, Bluetooth, Sleep, Start/Pause, Stop, Next/Prev song)

  Read the article

< Previous Page | 459 460 461 462 463 464 465 466 467 468 469 470  | Next Page >