Search Results

Search found 27819 results on 1113 pages for 'linux intel'.

Page 464/1113 | < Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >

  • Software RAID 1 broken, how do I fix this?

    - by Edward
    I'm running CentOS 6 x86_64. There is a software RAID 1 being used on the two internal 80GB drives. I got the following e-mail sent to me: A DegradedArray event had been detected on md device /dev/md1. Faithfully yours, etc. P.S. The /proc/mdstat file currently contains the following: Personalities : [raid1] md0 : active raid1 sda1[0] 511988 blocks super 1.0 [2/1] [U_] md1 : active raid1 sda2[0] 8190968 blocks super 1.1 [2/1] [U_] bitmap: 1/1 pages [4KB], 65536KB chunk md4 : active raid1 sdc1[0] sdb1[1] 1953512400 blocks super 1.2 [2/2] [UU] md3 : active raid1 sdd5[1] sda5[0] 61224892 blocks super 1.1 [2/2] [UU] bitmap: 1/1 pages [4KB], 65536KB chunk md2 : active raid1 sdd3[1] sda3[0] 8190968 blocks super 1.1 [2/2] [UU] unused devices: <none> The system appears to have booted fine and is working. The two drives' content did not change at all. I only removed and reinstalled them while I was booted on the CentOS Live DVD. How do I get the array working again?

    Read the article

  • Unified inbox shows twice on Thunderbird

    - by That Help Vampire Guy
    I'm using Thunderbird 24. If I show folders in Unified mode, my inbox folder shows up twice. If I choose the "All" folders mode, I see only one inbox. The issue started when I was using Ubuntu 12.04, but now I'm on Fedora 19. (I have migrated the folders on /home). I do remember having it not-duplicated, but then it started while still on Ubuntu. I noticed it when using the Converation plugin, but I had previously used the plugin without it happening. I have disabled the plugin and it persists. What I have tried If I close Thunderbird, rename the .thunderbird folder on my /home to something else, then it will create a new config profile, I have to set up everything again, and then it works as expected, see images below: Before resetting Unified vs All Folders After resetting Unified vs All Folders (I'm trying to avoid resetting the profile and creating a fresh new one, because the server -- MS Exchange -- doesn't support IMAP labels, so I'd lose all the tags on my messages, and I have organized it based on tags instead of folder).

    Read the article

  • Can't ssh from CentOS 6.5 to SUSE LINUX 10.1

    - by Pavel Tankov
    We have a quite old installation of SUSE LINUX 10.1 (i586) in the office. The problem shortly: I can successfully ssh to it from machines in the same LAN (192.168.1.0) and not from others (that are in 10.23.0.0). The SuSE has SSH server openssh-4.2p1-18.12. I have ruled out the firewall and hosts.allow and hosts.deny files. When my ssh login attempt fails, here is what the logs say: on the client: $ ssh -vvv 192.168.1.5 OpenSSH_5.3p1, OpenSSL 1.0.1e-fips 11 Feb 2013 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.1.5 [192.168.1.5] port 22. debug1: Connection established. debug1: identity file /home/nbuild/.ssh/identity type -1 debug1: identity file /home/nbuild/.ssh/identity-cert type -1 debug1: identity file /home/nbuild/.ssh/id_rsa type -1 debug1: identity file /home/nbuild/.ssh/id_rsa-cert type -1 debug1: identity file /home/nbuild/.ssh/id_dsa type -1 debug1: identity file /home/nbuild/.ssh/id_dsa-cert type -1 on the server: Aug 21 16:34:25 serverhost sshd[20736]: debug3: fd 4 is not O_NONBLOCK Aug 21 16:34:25 serverhost sshd[20736]: debug1: Forked child 20739. Aug 21 16:34:25 serverhost sshd[20736]: debug3: send_rexec_state: entering fd = 7 config len 403 Aug 21 16:34:25 serverhost sshd[20736]: debug3: ssh_msg_send: type 0 Aug 21 16:34:25 serverhost sshd[20736]: debug3: send_rexec_state: done Aug 21 16:34:25 serverhost sshd[20739]: debug1: rexec start in 4 out 4 newsock 4 pipe 6 sock 7 Aug 21 16:34:25 serverhost sshd[20739]: debug1: inetd sockets after dupping: 3, 3 Aug 21 16:34:25 serverhost sshd[20739]: debug3: Normalising mapped IPv4 in IPv6 address Aug 21 16:34:25 serverhost sshd[20739]: Connection from 10.23.1.11 port 44340 The above log on the server is when I enable DEBUG3 log level. However, with the default log level (INFO), the only thing the server logs is this: Aug 21 16:38:32 serverhost sshd[20749]: Did not receive identification string from 10.23.1.11 Any hints? I feel I've tried everything already.

    Read the article

  • mysql 5.1 - innodb - query_cache_size - 9,418,108 queries have been removed from the query cache due to lack of memory

    - by Tom C
    Currently running on a 16GB system - Ubuntu 64 bit. INnodb Buffer Pool is set to 10GB. tuning-primer shows the following: QUERY CACHE Query cache is enabled Current query_cache_size = 512 M Current query_cache_used = 501 M Current query_cache_limit = 4 M Current Query cache Memory fill ratio = 97.87 % Current query_cache_min_res_unit = 4 K However, 9418108 queries have been removed from the query cache due to lack of memory Perhaps you should raise query_cache_size That is over 9million queries removed. System uptime is 8 days. Should I remove the Query Cache altogether? Our db is always under heavy I/O. tia

    Read the article

  • Error when sending mail to an external mail server from Postfix on CentOS

    - by yankitwizzy
    I just installed Postfix. i have not yet done any configuration on it. Each time I try to use it to sendmail from another application, it keeps telling me that COnnection was refused from the ip I want to connect to. This is the error I get [root@localhost /]# telnet mail.abuse.org Trying 69.43.160.153... telnet: connect to address 69.43.160.153: Connection refused telnet: Unable to connect to remote host: Connection refused COuld someone please help me the problem

    Read the article

  • Only allow root to change filesystem

    - by Uejji
    The VPS I manage uses a simple hard link rsync archive daily backup system saved to a loop file. This is great, because each backup only takes up as much space as what has changed each day, and all user/group permissions are kept. I would like to give users direct access to their home directories in each backup, but I'm worried about intentional or accidental backup data destruction, as how it stands now users can actually change, destroy or add to backed up data they originally owned. I've been looking for a way to mount this filesystem similar to an ro mount option, but something that would still allow rw access to root, but I've had absolutely no luck. In other words, I want users to be able to view and copy their backed up data without actually being able to change it, and have that data maintain the original permissions. I've got no real preferences as far as filesystem, as long as it's a standard unix filesystem that can preserve permissions, support hard links and deny write access to users without actually stripping the w permission from everything.

    Read the article

  • What could cause a file system to spontaneously unmount or become invalid for a short time?

    - by Ichorus
    We've got DB2 LUW running on a RHEL box. We had a crash of DB2 and IBM came back and said that a file that DB2 was trying to access (through open64()) unmounted or became invalid. We have done nothing but restart the database and things seem to be running fine. Also, the file in question looks perfectly normal now: $ cd /db/log/TEAMS/tmsinst/NODE0000/TEAMS/T0000000/ $ ls -l total 557604 -rw------- 1 tmsinst tmsinst 570425344 Jan 14 10:24 C0000000.CAT $ file C0000000.CAT C0000000.CAT: data $ lsattr C0000000.CAT ------------- C0000000.CAT $ ls -l total 557604 -rw------- 1 tmsinst tmsinst 570425344 Jan 14 10:24 C0000000.CAT With those facts in hand (please correct me if I am mis-interpreting the data at hand) what could cause a file system to 'spontaneously unmount or become invalid for a short time'? What should my next step be? This is on Dell hardware and we ran their diagnostic tools against the hardware and it came back clean.

    Read the article

  • Screen flicker during content update, especially in Firefox

    - by Denis Malinovsky
    I'm using Nouveau video driver for my NVIDIA GeForce 6150SE nForce 430 video-card with Ubuntu 10.04. Screen flickers frequently, especially when I'm loading pages with many images/banners in Firefox. I tried to use proprietary NVIDIA driver, but it behaves itself even worse. Nv driver doesn't work at all. I also filed a bugreport in launchpad if you need any additional information.

    Read the article

  • I wanna save some terminal commands in a file

    - by Jakob Abfalter
    I am using Opensuse 12.3 What I wanna do is, create a link on my desktop for some specific terminal commandos. The backround is, that I do some backup via rsync and don`t wanna type the commandos everytime new. I also dont wanna use a cronjob, since my computer isnt running everytime. Perfect would be some desktop icons, which on clicking execute the command(s). Could somebody tell me how to do this?

    Read the article

  • Cloning to a smaller hard drive with DDRescue

    - by krebshack
    I am currently working with a 700 GB Seagate hard drive that's beginning to fail. I'll call this "SDB" from now on. I'd like to clone it while I'm still able to. However, the only hard drive that I have available is a 500 GB WD hard drive. I'll call this "SDC" from now on. The partition scheme on SDB is as follows: 9.77 GB is allocated to a recovery partition and the remaining 688.87 GB is allocated to a Windows partition. Both are formatted using NTFS. There is no partition scheme on SDC. I know how to clone one hard drive to another using DDRescue but I've only done it using hard drives that are the same size. For your reference, I'll normally use the command "ddrescue -v -r 3 /dev/sdb /dev/sdc example.log". I'd like to know if it's possible to do this with DDRescue. I've read the manual from GNU (http://www.gnu.org/software/ddrescue/manual/ddrescue_manual.html) and I haven't seen anything indicating that it is possible. I'm just looking for some confirmation that this is a correct impression. If it's not possible, then it would be helpful if any of y'all would be able to make some work around suggestions. But please don't feel obligated to do that. I don't want to have my one thread bogged down with two many questions.

    Read the article

  • How to filter Varnish logs based on XID?

    - by Martijn Heemels
    I'm running into infrequent 503 errors which appear hard to pinpoint. Varnishlog is driving me mad, since I can't seem to get the information I want out of it. I'd like to see both the client- and backend-communications as seen by Varnish. I thought the XID number, which is logged on Varnish's default error page, would allow me to filter the exact request out of the logging buffer. However, no combination of varnishlog parameters gives me the output I need. The following only shows the client-side communication: varnishlog -d -c -m ReqStart:1427305652 while this only shows the resulting backend communication: varnishlog -d -b -m TxHeader:1427305652 Is there a one-liner to show the entire request?

    Read the article

  • `adduser [options] user group` fails ubuntu 11.04

    - by Rob
    I'm want to use adduser However it doesn't seem to work if I provide the second argument for the user's group root@a:~# adduser rick staff adduser: The user `rick' does not exist. The group exists root@a:~# addgroup staff addgroup: The group `staff' already exists. The man page says this should work... adduser [options] user group Any ideas? I can do: adduser --ingroup staff rick So no massive issue, just seems strange.

    Read the article

  • How to Exclude an URL for Apache Mod_proxy?

    - by Mughil
    We have two Apache server as front-end and 4 tomcat server as back-end configured using mod_proxy module as load balancer. Now, we want to exclude an single tomcat url from the mod_proxy load balancer. Is there any way or rule to exclude? Proxy Balancer Setting: <Proxy balancer://backend-cluster1> BalancerMember http://10.0.0.1:8080 loadfactor=1 route=test1 retry=10 BalancerMember http://10.0.0.2:8080 loadfactor=1 route=test2 retry=10 </Proxy>

    Read the article

  • Multiple user directories on EC2

    - by Joseph
    Im trying to set up multiple user directories on EC2 running Ubuntu, but im not sure how to set it up correctly so that i can serve files in the following format: http://<ec2 ip address>/user_1/public_html/file1.html and http://<ec2 ip address>/user_2/public_html/file3.html and so on for every user that i add. I tried looking for the httpd.conf file but i coulndt find it i only found apache2.conf Thank you guys.

    Read the article

  • what is the meaning of *this* crontab setting?

    - by aXqd
    * */1 * * * sh foo.sh I found this setting on one production machine. And foo.sh was executed every one minute. I am guessing that the original author of this setting wants it to be executed every one hour. And I cannot find the official meaning of this setting in the crontab man page. Hence please help. UPDATE: I extracted these logs from that machine, however I cannot find the law out of them. 2013-06-29 20:47:01 2013-06-29 20:50:02 2013-06-29 20:51:01 2013-06-29 20:53:01 2013-06-29 20:54:01 2013-06-29 20:57:01 2013-06-29 20:58:01 2013-06-29 21:00:01 2013-06-29 21:05:02 2013-06-29 21:10:02

    Read the article

  • SSMTP to forward root@localhost mail

    - by Redconnection
    I would like to forward mail that gets sent root@localhost on multiple servers to our company admin account (e-mail is hosted on gmail) I have installed ssmtp on centos 5.5 via yum and configured it. i've also changed the last line in /etc/aliases to reflect where mail to root should go to. I've then tried sending mail to root - this gets delivered without a problem (mail -v root) I've also tried sending mail to root@localhost - this is not delivered to the specified gmail account.

    Read the article

  • When using gt5 in my home directory I get a blank page.

    - by MT
    When using gt5 in various directories on my system (including my home directory) I get blank results. If I limit the max-depth enough, I get results. For example, in my home directory 'gt5 --max-depth 2' produces a listing, while 'gt5 --max-depth 3' produces a blank page. I've noticed that the temporary html file that gets created in tmp (such as '/tmp/gt5.9035.kJVM08Y9/gt5.html' is a zero-byte file. I can successfully do a du in the same directory (which is what I thought gt5 was using), so I'm not sure what to check?

    Read the article

  • Find largest directories/files recursively

    - by Robert Munteanu
    I'm looking for a script/program which will display the top x largest directories/files and then descend into those folders and display the x largest directories/files for a configurable depth. 231MB bin - 220MB ls - 190MB dir - 15MB def - 3MB lpr - 10MB asd - 1MB link How can I do that?

    Read the article

  • solr Security help

    - by Camran
    I have solr setup with Jetty on my Ubuntu server. On any computer now, I can type my_ip:8983/solr/ and the page will show upp to anybody. How can I disable this so that only I can access that port and the solr admin? Thanks

    Read the article

  • Apache intermittently aborting requests

    - by Adam Phillips
    I have just been dealing with a problem whereby http requests are being aborted, seemingly at random. On any particular page in the website, when you opened a page, a number of the assets (img, css, etc) failed to load. If you refreshed, the page may work fine, the same set of assets may fail to load or different assets may fail to load. The net tab in firefox was returning 'Aborted' in the HTTP status code column for the failed assets, even tho in the case of images, the image previews were still working. There was nothing in any of the apache logs about the requests that failed, however since it seemed to point to an apache issue, we restarted apache. The first time we tried, it made no difference but about 10 minutes later, in the absence of a better solution we tried again. Bizarrely, the problem disappeared immeadiately. So now the site seems to be running fine again but its rather unsettling, both the intermittent nature of the problem and the lack of an explanation for its resolution. Has anyone seen anything like this before and if so did you find out the reason behind it? Many Thanks

    Read the article

  • What does directory permission 'S' mean? (not lower case, but in upper case)

    - by Howard Guo
    I downloaded Eclipse, uncompressed it, did a few other things and all sudden I notice this interesting behaviour: ^_^ ~/Downloads > sudo chmod 0000 eclipse/ ^_^ ~/Downloads > stat eclipse/ File: 'eclipse/' Size: 4096 Blocks: 8 IO Block: 4096 directory Device: 801h/2049d Inode: 529725 Links: 9 Access: (2000/d-----S---) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2012-11-22 19:54:57.752017352 +1100 Modify: 2012-09-20 18:16:26.000000000 +1000 Change: 2012-11-22 20:07:49.354016510 +1100 Birth: - ^_^ ~/Downloads > sudo chmod 0755 eclipse/ ^_^ ~/Downloads > stat eclipse/ File: 'eclipse/' Size: 4096 Blocks: 8 IO Block: 4096 directory Device: 801h/2049d Inode: 529725 Links: 9 Access: (2755/drwxr-sr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2012-11-22 19:54:57.752017352 +1100 Modify: 2012-09-20 18:16:26.000000000 +1000 Change: 2012-11-22 20:08:19.042016478 +1100 Birth: - What does 'S' permission mean to a directory? And why it doesn't let me get rid of it? Thanks.

    Read the article

  • Gnome, open with, custom command, filename reference

    - by Tergiver
    I want to execute this custom command on a file from the Gnome File Browser: hexdump -C $f > $f.dump That would create a hexdump of the file with the file's name + .dump in the directory that the file exists in. When I say $f above I mean something that would substitute the name of the file that was opened. So I've tried "Open with", "Use a custom command". I can't get it to work. I've tried a number of symbols in place of $f. Is it even possible? Before you suggest getting a GUI hexdump program, this is just one example. I have the need to do this sort of thing for many terminal-type programs. Am I the only person on Earth who wishes for a hybrid File-Browser-slash-Command-Terminal? That would be a file browser which contained a terminal pane who's current directory always matched that of the file browser. One could execute shell commands in the context of what they were viewing in the browser.

    Read the article

  • File command output is different for same file on diff machine

    - by Coka
    I get different output of file command on same file(checked inode) from different machines. One of the machines is with suse10 sp3 and the another - rhel4. machine1>file x.tcl x.tcl: ASCII English text machin2>file x.tcl x.tcl: data Even in vi editor same file look different from different machine. Any clue? One more thing - there's third machine suse10 sp3 works fine. Is this machine issue?

    Read the article

< Previous Page | 460 461 462 463 464 465 466 467 468 469 470 471  | Next Page >