Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 465/750 | < Previous Page | 461 462 463 464 465 466 467 468 469 470 471 472  | Next Page >

• Can't use command line – "command not found" after editing PATH

  - by MEM

  I'm running OS X Mavericks and was trying to install MAMP PRO 2.2. I was trying to configure the PATH variable to have the PHP binaries of MAMP PRO. I added the following line on my ~/.bash_profile file: export PATH=/Applications/MAMP PRO/bin/php/php5.5.3/bin:$PATH As you may notice, since I have MAMP PRO and not just MAMP, I've added a space. As a consequence, I know have the following error each time I run the terminal: -bash: export: `PRO/bin/php/php5.5.3/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin': not a valid identifier Worst: I can't get any command to run, like: ls, clear etc. I always get: "command not found" I don't even know the absolute path for ls. How can I make the commands work again, so that I can properly fix the path I was trying to setup on the .bash_profile file?

  Read the article

• Cisco ASA - NAT'ing VPN traffic

  - by DrStalker

  I have an IPsec VPN setup like this: [Remote users]-[Remote ASA] <-VPN-> [My ASA]-[Subnet A]-[Router 2]-[Subnet B] The VPN is set to handle traffic between [remote users] and [Subnet A]; it does not include [Subnet B]. Pretend the firewall rules for all routers are to permit everything. Now I want to redirect traffic that comes over the VPN to a specific IP on [subnet A] (192.168.1.102) to an IP on [Subnet B] (10.1.1.133) If I add a rule on [My ASA] to NAT traffic to original IP 192.168.1.102 to new IP 10.1.1.133, 1) Will this affect the connections coming in over the VPN? (ie: the VPN packets are unencrypted and then NAT is applied) 2) Will this work when the post-NAT target is on Subnet-B, which is not part of the VPN traffic selection?

  Read the article

• File sometimes doesn't download from my website

  - by kylex

  When I attempt to download this file, sometimes it only downloads about 700KB (the file is 40MB) then I get the message that the download is complete. If I try to download the file again, it works properly. The problem seems prevalent in IE, although I've had it happen in Chrome sometimes too. I have the following code: <input type="button" value="Agree to Terms and Download" onClick="location.href='/downloads/setup.exe';" /> If it matters, this is over a secure connection. I also tried zipping the file, and had the same issues.

  Read the article

• Need an alerting system if my cloning script fails

  - by rahum

  I've configured a nightly rsync to mirror one server to a standby offsite backup server. The total datastore on the primary is 1.5TB. In the course of getting this working, I ran into numerous instabilities with the environment, which I seem to have sorted out, but even though it's now working, I am still nervous. This is intended to be a disaster-scenario standby server, and if disaster strikes and the standby does not have all the proper data synchronized, I'm out of a job. Thus, I want to script a system that will confirm, after each nightly sync, that the destination data matches the source. I realize that rsync does this, but if rsync doesn't complete fully (which was happening during the setup troubleshooting), I need to know. Any suggestions? I'm best with Ruby, if that is relevant for the solution.

  Read the article

• Help accessing Beagle over serial with Minicom/GTKTerm

  - by mrgordon

  I am trying to access a brand new Beagle Board from Ubuntu or Mac over serial using the setup seen here: http://specialcomp.com/beagleboard/RevC1.htm I got Minicom and GTKTerm installed on the Ubuntu box. I set up the correct baud rate, turned off flow control, and have tried ttyUSB0 and ttyS0. Once minicom is configured properly, I should just see the init text from the board appear if I have minicom open in terminal while I plug in the board, correct? dmesg shows ttyUSB0 on the computer has been connected to ttyS0 on the beagle.

  Read the article

• Which programs using my internet connection ? [closed]

  - by Eray Alakese

  Possible Duplicate: Monitor all and any internet traffic from my home PC - what should I use? My internet connection has 4GB quota. But my quota is run out very fast. I setup Net Limiter , for look which programs using my internet connection. But there isn't any weird program. There is only firefox.exe . So, how can i look all programs which using my connection and leech my bandwidth quota? For example, is there any CMD command ? like netstat

  Read the article

• HP Media Smart remote access

  - by Coov

  I just purchased this box for home backups for my pc's and mac's. Everything works great accept for the remote access part. I can RD into the machine locally but I can't get to it from outside of my network. I've enabled port forwarding on my router but it doesn't seem to matter. I checked with Qwest and they don't block these ports so I'm at a loss. I do have Vonage in front of my router but I've taken it out and it didn't make a difference. I suspect I've made an error with my router setup. I'm a programmer and I'm playing in the world of the unknown here. I'm lost. Any suggestions?

  Read the article

• What tool can I use to definitely kill a process on Windows?

  - by Moak

  Can anyone recommend an application (preferably usb-portable that doesn't require setup) That really kills a process immediately in windows XP? I ask this because often when I need to use the XP task manager it seems to want to go about it "the polite way" and sometimes crashed programs don't quit or take a minute to shut down. I need a real stone cold killer, not a pushover-could-you-please-quit-now-no?-ok-sorry-program Edit I'm sorry if it wasn't clear previously but I did mean the situation when even the "End process" command in Process tab of the task manager doesn't kill a program, however one of the answers did point me to the "End Process Tree" command which I've never noticed (when right clicking on the process)

  Read the article

• "Can't open display" even after access with xhost

  - by Yann

  I'm trying to run a graphical program remotely, without using ssh. I've set the display variable on the server (let's say server.com, Linux, not ubuntu, and no su rights) to point to my workstation (workstation.com, ubuntu 10.04) setenv DISPLAY workstation.com:0 Then on my workstation I've tried both xhost +server.com and xhost + Then I ssh into the server (to test things): ssh [email protected] and try to run xclock, and get the following error: Error: Can't open display: workstation.com:0 I've looked at /etc/ssh/ssh_config on the workstation and I should be forwarding correctly: X11Forwarding yes. How do I go about troubleshooting this? What logs on the workstation document these failed attempts? To explain why I'm doing this: I want to run a batch job on a server to debug an MPI-based parallel program. I want to run xterm as the batch job executable, per the instructions provided by the system admins. This setup use to work. I reinstalled things on my workstation and since then I frequently get one-time message along the lines The authenticity of host 'hostname (XXX.XXX.XXX.XX)' can't be established. My attempt to fix the above was to move my ~/.ssh/known_hosts file to a back up on both server and host, and then to ssh from each to the other with the flag -o StrictHostKeyChecking=no. I no longer get that message, but I was wondering does this play a part in why X11 forwarding is not working?

  Read the article

• "Disk Not Found" Error when trying to install iso image of CentOs on ESXI using VSphere

  - by kamal

  When trying to install CentOs setup as an iso image on datastore, i get an error : "Disk Not Found". I am using ESXi 4.1 as host VM. Is there a way to attach DVD/CD as iso image ? I tried "Connect at Power on" Checked and Connect CD/DVD on the VSphere Console, but i still am unable ot get the iso image recognized as a DVD mounted image: Solved: if i look at the image size, it was 11 MB, so it WAS a boot iso, but nithing else, if we compare it with other boot images with complete iso's therein lies the solution. This boot.iso was from rBUILD/Conary packaging

  Read the article

• Error from DNS validation service: RFC821 4.3

  - by ferdi

  So I've managed to setup bind9 and a mail server, but it seems there is something wrong. I don't quite under stand this error: The configuration of your mail servers and your DNS are not ok! The report of the test is: mail.domain.com. - mail.domain.com - 208.xxx.xxx.xxx - lisa.domain.com Spam recognition software and RFC821 4.3 (also RFC2821 4.3.1) state that the hostname given in the SMTP greeting MUST have an A record pointing back to the same server. Can anyone explain this to me in a bit more detail, and maybe point me in a direction to solve this?

  Read the article

• Samba does not reload user group members

  - by xato

  I am running a simple samba server setup where users connect to a share which contains folders for specific user groups. The folders are chmod 2770, so only users which are in the correct group can read/write in them. The problem is that if I change group memberships (i.e. remove user from group / add user to group; changes are in sync between clients and server!) samba does not automatically reload the group memberships for the user, so they can still write to groups that they are no longer a member of etc. I either have to reconnect to the share or to restart samba to apply the changes. Is there any way to prevent group caching and/or enable group membership reload in samba? My smb.conf: https://gist.github.com/anonymous/ca7c10a3b3e2168d7a03

  Read the article

• Slow website load with CNAME, fast when using IP

  - by Nate Strandberg

  I setup two DNS servers on my network: ns1.byte-werx.com && ns2.byte-werx.com I can ping the DNS servers and get a fairly good response time, when I dig them I also get a fairly reasonable response, but any website I filter through them is painfully slow (an upwards of 20+ seconds) -- verifiable by performing a tracert or attempting to access the URL in a browser. The DNS servers are running CentOS 6.3 and BIND9 with 500MB of memory (I figure that should be more than enough?). I have a reverse look-up zone (1.168.192) along with two website zones (www.byte-werx.com and www.stayhomedental.com) If I access the websites using their IP the page loads nearly instantly so I do not believe the issue is with the hosting server, but that is running Ubuntu Server 12.04 and Apache2 with 12GB memory. Any thoughts? I do not have the named.conf file in front of me but I can edit this post to include it if you feel it would be useful. Thanks for any advice!

  Read the article

• How to set up a PC which can be booted from Linux AND Windows?

  - by Martin

  Our PC was running Windows XP up to know. It has become incredibly slow and I'm considering switching to Linux (Ubuntu?!) as a fresh OS. However, there are some applications we rarely use which run only on Windows and I also want to have the possibility to easily go back to the old system, if I should find during testing linux, that anything is missing or not available. So the idea is to install Linux on a new (second) hard drive and use the existing Windows XP from a virtual machine (converted by Paragon Drive Backup) in the transition time. We have a lot of data on the PC, tens of GBs of Photos (managed by Picasa), ... My questions: What could be the best way to setup the new hard drive? (Partitions) I assume that I can not access the Linux data from Windows but I could access (read/write) windows drives from Linux? Does anyone know good tutorials for this use case? What other things might I have to consider for transition Windows-Linux?

  Read the article

• CentOS - Apache and SSL?

  - by NeoNmaN

  Hei all i have problem for my SSL setup, when i put SSL Engine to on my Apache will not start up, if i remove it, its work fine. i can't finde the Apache log, so i can find out of whats happen here, can sommen maby tell me the problem or link to the defualt log-path for Apache? here is my vhost config file. <VirtualHost *:443> # SSLEngine On SSLProtocol all SSLCertificateFile "/etc/pki/tls/schemecloud.co.uk.csr" SSLCertificateKeyFile "/etc/pki/tls/schemecloud.co.uk.key" SSLCACertificateFile "/etc/pki/tls/rapidssl.crt" ErrorLog "/var/www/error_ssl_log" <Directory /var/www/html> AllowOverride All </Directory> DocumentRoot /var/www/html/ ServerName schemecloud.co.uk </VirtualHost>

  Read the article

• Installing additional printer drivers (x86) on Windows 7 (x64)

  - by ambrax

  I've successfully installed Windows 7 (x64) and drivers for my Canon MP510, and have no problem printing with this setup. There is another PC in the network running XP SP3, and I want to share the printer so that users of that PC can also print. On W7 I have the option of installing additional printer drivers for other system architectures (Itanium and x86). I've downloaded the most current 32-bit drivers for the printer, but every time I direct the install dialog to the folder containing the drivers, I get the following error message: Selected printer driver not found The specified location does not contain the driver Canon Inkjet MP510 Printer for the requested processor architecture. Retry Cancel I'm stumped. I'm absolutely certain that the specified location actually does contain the correct drivers; I've even installed them on the XP system. I've tried everything I can think of. What am I overlooking?

  Read the article

• sharepoint 2007 access denied when accessing user profiles via ssp

  - by user22215

  Guys I have a really strange problem in regards to sharepoint mysites today I go into user profiles and properties in order to setup a property all of a sudden I get access denied. First off I know that I'm logged in with the correct account after the access denied I decided to click on personalization services and permissions I than get An unhandled exception occurred in the user interface.Exception Information: Cannot complete this action. I'm not seeing anything in the server application logs either. So have any of you guys seen this before is there some kind of way to grant a user account the manage profiles right permission using stsadm. BTW all other fucntions of the ssp are working fine so my question is if the user profiles and my sites of a ssp tanks how do you repair that portion of the ssp? BTW the user accounts that I'm using are site collection owners and also they have full control at the web application level. I actually ran across this interesting post but this does not really help my problem. http://blog.tylerholmes.com/2008/09/access-denied-for-site-collection.html

  Read the article

• SSO solution and centralized user mgmt for about 10-30 Ubuntu machines?

  - by nbr

  Hello, I'm looking for a clean way to centralize user management. The setup: About 10-30 linux machines (Ubuntu 10.04 LTS server) Maybe 10-30 users for now. The requirements (hopes and expectations): A single place for the administrator to manage user accounts, passwords and the list of machines each user has access to. (And probably groups.) Doesn't have to be fancy. Single sign-on for SSH: the user should be able to login from machine A to machine B without re-entering his/her password. A Quick Google searches give me pointers to OpenLDAP and Kerberos, but I'm not sure where to start and what problem will each solution actually solve. Which way to go? I'd love to find a clear that focuses on this subject. (Or: am I asking "a wrong question"?)

  Read the article

• client subscribed to a multicast group not receiving data

  - by Abruzzo Forte e Gentile

  I have a network that was setup for multicast traffic IN Machine A there is a server application generating multi-cast traffic. I have also different clients subscribing to that mulicast traffic -some client are in the same machine A -other clients are in machine B,C,D # Address I am using IP : 239.193.0.21 PORT: 20401 I don't know why but the client in machine A , even if they join the group, don't receive any data while (and this is the funny part) machine B,C and D receive everything. Checking with Wirshark I can see that the UDP traffic flow is there in Machine A. I am using LInux/Red-Hat Enterprise 6.2 What should I look at? Any setting in the os? Firewall or what?

  Read the article

• LVM, Soft RAID1, and Replication?

  - by mtkoan

  Hi all, I am practicing putting together a HA file server. It is a linux server with 2 1.5TB Hard drives. My plan is to use LVM to manage the physical volumes into logical volumes for /, /home, and /var. Then use md (soft RAID 1) to mirror the image onto the second HDD, THEN use DRDB to mirror the entire setup another server. Is this overkill? Would I just be okay with just md and DRDB? The system will serve user's homedirs (~100) and probably some groupware or other local intranet. On my own machines I've always separated root and /home partitions in case I break something, I can easily reinstall the OS. Should I follow that same theory here? If so I need LVM, because I really can't predict where we'll need more space, /var or /home.

  Read the article

• Why does Public Folder share prompt for password even after I set "Turn off password protected sharing"

  - by cmaduro

  I have a fileserver on a WORKGROUP which I have created a share on. I have turned on public folder sharing, file and printing sharing and set password protected sharing to off. When I try to share the folder by right clicking it and selecting proerties, then selecting sharing tab, then clicking the "share" button, then clicking share, it prompts me asking wether or not I want to turn on network discovery for public network, and after I say either yes or no, it says that my folder cant be shared. When I try to share via advanced sharing, then the folder is shared, and it's status is set to shared. However when I try to access this folder from a computer on the same network, it prompts me to enter a username and password. I am trying to setup a share for my VMware ThinApp packages that can be access no matter what domain the users are on.

  Read the article

• Ubuntu 12.04 - syslog showing "SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled"

  - by Tom G

  I have been seeing these random logs in syslog on our production system. There is no XFS setup. Fstab only shows local partitions, only EXT3 . There is nothing in crontabs either. The only file system related package I have installed is 'nfs-kernel-server' Kernel version is 3.2.0-31-generic . kernel: [601730.795990] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled kernel: [601730.798710] SGI XFS Quota Management subsystem kernel: [601730.828493] JFS: nTxBlock = 8192, nTxLock = 65536 kernel: [601730.897024] NTFS driver 2.1.30 [Flags: R/O MODULE]. kernel: [601730.964412] QNX4 filesystem 0.2.3 registered. kernel: [601731.035679] Btrfs loaded os-prober: debug: running /usr/lib/os-probes/mounted/10freedos on mounted /dev/vda1 10freedos: debug: /dev/vda1 is not a FAT partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/10qnx on mounted /dev/vda1 10qnx: debug: /dev/vda1 is not a QNX4 partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/20macosx on mounted /dev/vda1 macosx-prober: debug: /dev/vda1 is not an HFS+ partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/20microsoft on mounted /dev/vda1 20microsoft: debug: /dev/vda1 is not a MS partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/30utility on mounted /dev/vda1 30utility: debug: /dev/vda1 is not a FAT partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/40lsb on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/70hurd on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/80minix on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/83haiku on mounted /dev/vda1 83haiku: debug: /dev/vda1 is not a BeFS partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/90bsd-distro on mounted /dev/vda1 83haikuos-prober: debug: running /usr/lib/os-probes/mounted/90linux-distro on mounted /dev/vda1 os-prober: debug: running /usr/lib/os-probes/mounted/90solaris on mounted /dev/vda1 os-prober: debug: /dev/vda2: is active swap Why would this randomly show up? This also spawns multiple "jfsCommit" processes.

  Read the article

• WinXP on VPC - Unable to change the way users log on or off

  - by kamleshrao

  On my Win7 computer, I have setup a new Win-XP VPC. In the VPC window, when I click Ctrl+Alt+Del, it shows me Windows Task Manager. As per MS KB [ http://support.microsoft.com/kb/281980 ], we can change this behavior to show the regular Windows Security window. But while making this change, I am getting the following error: User Accounts Fast User Switching cannot be turned off from a remote connection to this computer. Log on to the computer locally to turn off Fast User Switching. OK Is there any way I can fix this setting?

  Read the article

• Still no external sound after installing ubuntu 10.04

  - by Walter

  As suggested I upgraded. Same as before except now not even the speaker control in the application bar. Please help. Background: I have Ubuntu 9.10. Headphones appear to work fine. External speakers - nothing. There are so many sound preferences I have no idea what or which combination. Went to terminal and ran alsamixer which seems to recognize my sound card, though the driver is not listed in System Administration Hardware Drivers; the only driver listed is my graphics card. Setup: I have a Dell 8250. Speakers are plugged into the SB live card. Woofer and 2 speakers using transformer.

  Read the article

• Developing and implementing a testing plan for a software app deployed on a web server

  - by Abhzoo

  A company in the USA is building a new Web App that will be offered SaaS to customers and the development is being done by a software development team located in a different country(India). They are about to take delivery of a first demo to provide live feedback to the team in India. The overseas team requires a cloud server (Windows + SQL Standard, 8GB Ram, 8 vCPUs, 40GB SSD system disk, 80GB SSD data disk, 1600Mb/s network bandwidth) to serve as a tester server. When the tester is setup the team will install the app on the test server to get live feedback. Q:Explain in detail how you will develop and implement a testing plan for the software App. Be sure to explain the specifics. PLEASE HELP, NEED ANSWER ASAP

  Read the article

< Previous Page | 461 462 463 464 465 466 467 468 469 470 471 472  | Next Page >