Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 466/750 | < Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >

• Ubuntu 12.04 - syslog showing "SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled"

  - by Tom G

  I have been seeing these random logs in syslog on our production system. There is no XFS setup. Fstab only shows local partitions, only EXT3 . There is nothing in crontabs either. The only file system related package I have installed is 'nfs-kernel-server' Kernel version is 3.2.0-31-generic . kernel: [601730.795990] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled kernel: [601730.798710] SGI XFS Quota Management subsystem kernel: [601730.828493] JFS: nTxBlock = 8192, nTxLock = 65536 kernel: [601730.897024] NTFS driver 2.1.30 [Flags: R/O MODULE]. kernel: [601730.964412] QNX4 filesystem 0.2.3 registered. kernel: [601731.035679] Btrfs loaded os-prober: debug: running /usr/lib/os-probes/mounted/10freedos on mounted /dev/vda1 10freedos: debug: /dev/vda1 is not a FAT partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/10qnx on mounted /dev/vda1 10qnx: debug: /dev/vda1 is not a QNX4 partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/20macosx on mounted /dev/vda1 macosx-prober: debug: /dev/vda1 is not an HFS+ partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/20microsoft on mounted /dev/vda1 20microsoft: debug: /dev/vda1 is not a MS partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/30utility on mounted /dev/vda1 30utility: debug: /dev/vda1 is not a FAT partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/40lsb on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/70hurd on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/80minix on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/83haiku on mounted /dev/vda1 83haiku: debug: /dev/vda1 is not a BeFS partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/90bsd-distro on mounted /dev/vda1 83haikuos-prober: debug: running /usr/lib/os-probes/mounted/90linux-distro on mounted /dev/vda1 os-prober: debug: running /usr/lib/os-probes/mounted/90solaris on mounted /dev/vda1 os-prober: debug: /dev/vda2: is active swap Why would this randomly show up? This also spawns multiple "jfsCommit" processes.

  Read the article

• setting up a private network using linksys router

  - by user287745

  scenerio:- a database server running sql server 2005 and sql server management studio 2005 express editions a web server running IIS 5.0v using windows xp pro. two other computer having windows xp and windows 98 i have a linksys router which i use to access point for wireless (laptop) there are 5 sockets behind it four for clients and one for internet. i would like to setup a LAN- something like a private hosting area with two clients. would should i do? where to connect what and what would the changes in settnigs be. right now it uses dhcp or something to assign ips. where will the webserver be attached to the internet socket? where will the db server be attached? any guide, links, help thank you

  Read the article

• lighttpd silently stops logging

  - by Max Cantor

  I'm on a Slicehost 256MB VPS with Ubuntu 9.04 (Jaunty). lighttpd is the only web server process running; it listens on port 80. My lighttpd.conf can be found here. I'm using Ubuntu's default logrotate setup for lighty. At seemingly random times, lighttpd will stop logging. It is not correlated with log rotation--that is, the errors do not occur when logrotate kicks in. What happens is, I will verify that the server is serving files by hitting a URL with my browser, and I will verify that it is not logging by checking access.log and seeing that the GET request I just made is not there. Using init.d to restart the process starts logging again, without truncating or rotating the log file. That is, new requests will be logged at the end of the existing access.log file. There are no cron jobs running on this box. Any ideas?

  Read the article

• Deploying a Windows 7 image, which way is the fastest?

  - by MatF

  I captured an image of a basic Windows 7 installation with some modifications using imagex. Before the image was captured, I ran sysprep generalizing and selecting to enter OOBE after it's done. Which way would be the fastest to deploy that image again? Using imagex /apply. Or naming the image install.wim and put it in the source folder of a normal installation (on a bootable USB device), running a normal setup afterwards. Currently I have only tried the second approach. However I just found out about the imagex way and wondered if it would be faster. Or are the even more methods that would be better?

  Read the article

• isolate web servers on intranet with dfl-800

  - by microchasm

  I administer a small network (10 users). I'm getting ready to deploy a internal webapp that will be hosted and accessed locally only. There are about 10 users on the network (192.168.111.0/24), a win2k3 server, apache (RHEL), and Mysql (RHEL), and various miscellaneous peripheries. I'd like to isolate the apache and sql boxes into a seperate area of the lan to keep things easier to maintain/grow. I've been reading about vlans, subnets, etc.. I'm not clear, however, which would be the best solution for our setup. Thanks for any tips and or advice.

  Read the article

• Apache: How can I make my localhost on 192.168.1.101 visible from 192.168.1.102?

  - by takpar

  Hi, I've setup a Apache web server on Ubuntu Linux. I can see http://localhost well. But I can't see localhost from other machines in my network using IP address: http://192.168.1.101 I added the lines below to my apache conf: `Allow from 192.168.1` but it did not work. It says "the connection has timed out". what should i do? PS: adp@adp-desktop:~$ sudo netstat -ap | grep apache tcp 0 0 *:www *:* LISTEN 10581/apache2 tcp 0 0 localhost:www localhost:46017 ESTABLISHED 10586/apache2

  Read the article

• Logitech C510 HD Webcam related question

  - by Ashfame

  I am going to buy Logitech C510 HD webcam and I just checked on other questions here on AskUbuntu that it works out of the box with cheese. My question is can it be limited in any functionality that I would like to do with it? I would like it to be used with everything - Skype, Gtalk video chat, Facebook, Youtube etc I would like the ability to record or do a video call in lesser resolution video (its a 720p one). Also since I read that I should have a Core2Duo 2.2Ghz for 720p but I have a 2.0Ghz one, would it be possible for me to first record it and then encode it after recording if my processor really start giving issue when doing on-the-fly encoding? Anything else that I should consider? I also have a ATI HD 4850 512MB card, if it can help in encoding on-the-fly or is there a chance that my graphics card alone can handle it and those specs were just for a system without a graphics card? I believe so. Also, I got no worries in dealing with console, if I have to do some of the things above in terminal. Other possible significant details: I have a dual screen setup 29" (1360X768) & 22" (1680X1050) which might be using some good power from GPU and I have 2GB DDR2 800Mhz RAM.

  Read the article

• GPU Computing - # of GPUs supported

  - by TehTypoKing

  I currently have a desktop with 6 GPUs ( 3x HD 5970s ) in non-crossfire mode. Unfortunately, it seems that Windows 7 64bit only supports up to 4 GPUs. I have not been able to find a reliable source to deny or confirm this. If windows 7 has this limitation, is there a Linux flavor that supports more than 4 GPUs? In-case you are wondering, this is not for gaming but high-speed single precision computing. With this current setup ( if I can find 6gpu support ) I am looking to reach 13.8 Teraflops. Also, my motherboard does support 3 16x pci-xpress gen2 slots... and I have a 1500w powersupply plugged into a 20amp outlet. Windows is able to detect all 6 cores.. although, 2 of which displays the warning "Drivers failed to load". To recap: - Can windows support 6 GPUs? - If not, does Linux? Thank you.

  Read the article

• test if master dns has trasnfered copt to slave

  - by su55

  Hello, I setup my master and slave using freebsd. im currently running the Bind 9.X version, so far everything is working successfully. Just one small problem. I cant get the master copy of my dns to transfer it to the slave server. i included transfer-allow {192.168.1.111;}; // this is the slave servers ip i ran the rndc reload command to check but i dont see the copy in the /etc/named/master/? Any help would be necessary and if you like the layout of my dns, I can provide that too.

  Read the article

• Help accessing Beagle over serial with Minicom/GTKTerm

  - by mrgordon

  I am trying to access a brand new Beagle Board from Ubuntu or Mac over serial using the setup seen here: http://specialcomp.com/beagleboard/RevC1.htm I got Minicom and GTKTerm installed on the Ubuntu box. I set up the correct baud rate, turned off flow control, and have tried ttyUSB0 and ttyS0. Once minicom is configured properly, I should just see the init text from the board appear if I have minicom open in terminal while I plug in the board, correct? dmesg shows ttyUSB0 on the computer has been connected to ttyS0 on the beagle.

  Read the article

• Control scheduled tasks execution

  - by SJuan76

  We are a small shop. I am mainly a programmer, but due to being the only one that risks to manage our servers, the task has fallen on me (yet I it is still a secondary function so I cannot give it too much time). Over the course of years we have needed to create a decent number of .bat scripts that run as scheduled tasks in our servers (dump DB servers, SVN servers, copy files, etc.). Manually checking that everyone has proceeded ok is a time consuming task. I could get them to send an email on completion, but then I would get swarmed by lots of emails each morning. If I setup them to only e-mail on failure, I might miss the instances where the error causes the task to abort (or even not to start). Are there other alternatives? We are currently using Windows 2003 R2, but we are thinking of adding some Linux server soon, so a cross-platform solution would be best.

  Read the article

• Can you suggest some DIY PC specs for 1) Value, and 2) Future 'upgradability'?

  - by user17381

  Hi, I'm considering building a new desktop PC from components. For the last 7/8 or so years I have almost exlusively used laptops, and so have fallen behind a bit with knowledge of various hardware technologies. Anyway, now I'm considering building a new desktop machine. Mainly for development work, but also would be nice to do a bit of gaming. The two main criteria are: I would like the first build to be relatively low cost. I would like to select components that will allow me to upgrade in the future without throwing too much away. Can anyone recommend a setup? Thanks

  Read the article

• correct format for datetime appended to filename

  - by jhayes

  I'm trying to setup a batch file to execute a set of stored procs and dump the output to a timestamped text file. I'm having problems finding the correct format for the timestamp. Here is what I'm using osql.exe -S <server> -E -Q "EXEC <stored procedure> " -o "c:\filename_%date:~-0,10%_%time:~-0,10%.txt" The error I get is: Cannot open output file - x:\filename_Thu 06/25/_16:26:43.1.txt No such file or directory I can't find the documentation and I've played around with it but can't find the correct format.

  Read the article

• How to deny access to disabled AD accounts via kerberos in pam_krb5?

  - by Phil

  I have a working AD/Linux/LDAP/KRB5 directory and authentication setup, with one small problem. When an account is disabled, SSH publickey authentication still allows user login. It's clear that kerberos clients can identify a disabled account, as kinit and kpasswd return "Clients credentials have been revoked" with no further password / interaction. Can PAM be configured (with "UsePAM yes" in sshd_config) to disallow logins for disabled accounts, where authentication is done by publickey? This doesn't seem to work: account [default=bad success=ok user_unknown=ignore] pam_krb5.so Please don't introduce winbind in your answer - we don't use it.

  Read the article

• sudoers security

  - by jetboy

  I've setup a script to do Subversion updates across two servers - the localhost and a remote server - called by a post-commit hook run by the www-data user. /srv/svn/mysite/hooks/post-commit contains: sudo -u cli /usr/local/bin/svn_deploy /usr/local/bin/svn_deploy is owned by the cli user, and contains: #!/bin/sh svn update /srv/www/mysite ssh cli@remotehost 'svn update /srv/www/mysite' To get this to work I've had to add the following to the sudoers file: www-data ALL = (cli) NOPASSWD: /usr/local/bin/svn_deploy cli ALL = NOEXEC:NOPASSWD: /usr/local/bin/svn_deploy Entries for both www-data and cli were necessary to avoid the error: post commit hook failed: no tty present and no askpass program specified I'm wary of giving any kind of elevated rights to www-data. Is there anything else I should be doing to reduce or eliminate any security risk?

  Read the article

• How to ensure nvidia_current module loads during boot

  - by Aras

  I am running Ubuntu 12.10 on an Asus G75V laptop with nvidia gforce GTX 660M. I first run 12.04 on this machine and was able to install nvidia_current drivers from swat ppa: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current This worked in 12.04 and after rebooting the machine my graphics where working properly. After upgrade to 12.10 however, the machine boots into a low resolution desktop which I can not really interact with. I suspect this is due to the driver not being loaded properly. To fix this, I have to switch to ctrl+alt+F1 session and manually load the nvidia_current module and restart the desktop manager: sudo modprobe nvidia_current sudo service lightdm restart Now everything works fine again. However, I would like not to have to do this every time I reboot the machine. I also dont want to hack an script to do this on load. Basically, if things are setup currectly, the nvidia_current driver which is installed should load. How can I make sure nvidia_current driver module loads properly when system starts?

  Read the article

• Why does Public Folder share prompt for password even after I set "Turn off password protected sharing"

  - by cmaduro

  I have a fileserver on a WORKGROUP which I have created a share on. I have turned on public folder sharing, file and printing sharing and set password protected sharing to off. When I try to share the folder by right clicking it and selecting proerties, then selecting sharing tab, then clicking the "share" button, then clicking share, it prompts me asking wether or not I want to turn on network discovery for public network, and after I say either yes or no, it says that my folder cant be shared. When I try to share via advanced sharing, then the folder is shared, and it's status is set to shared. However when I try to access this folder from a computer on the same network, it prompts me to enter a username and password. I am trying to setup a share for my VMware ThinApp packages that can be access no matter what domain the users are on.

  Read the article

• LVM, Soft RAID1, and Replication?

  - by mtkoan

  Hi all, I am practicing putting together a HA file server. It is a linux server with 2 1.5TB Hard drives. My plan is to use LVM to manage the physical volumes into logical volumes for /, /home, and /var. Then use md (soft RAID 1) to mirror the image onto the second HDD, THEN use DRDB to mirror the entire setup another server. Is this overkill? Would I just be okay with just md and DRDB? The system will serve user's homedirs (~100) and probably some groupware or other local intranet. On my own machines I've always separated root and /home partitions in case I break something, I can easily reinstall the OS. Should I follow that same theory here? If so I need LVM, because I really can't predict where we'll need more space, /var or /home.

  Read the article

• How do you deal with poor management [closed]

  - by Sybiam

  I come from a company where during a project, we saw the client 3 time during the whole project. We were never informed when did the client came in office in order to discuss with him about his requirements. I did setup redmine and told them that if they have any request they can post an issue there. But they never really used redmine to publish anything. They would instead: harass a team member on the phone at any time of the day or night hand us over sheets of paper with new requests or changes hand us over new design (graphical) They requested how much time it would take us to finish the project, I gave them a date and a week to test everything and deployment. I calculated that time taking into account the current features we had to do. And then blamed us that our deadline was wrong and that we lied. But the truth is that one week before that deadline they added a couple of monster feature from nowhere and that week were we were supposed to test and deploy, my friends spent all day in the office changing all little things. After that project, my friend got some kind of depression and got scared everytime his phone rang. They kind of used him as a communication proxy. After that project of hell, (every body got pissed off on that project) as far as I know the designer who was working with us left work after that project and she had some kind of issue too with managers. My team also started looking for work somewhere else. At first I tried to get things straight with management, I tried to make a meeting to discuss about the communication issues and so on.. What really pissed me off and made me leave that job for good is the following. Me: "We have to discuss about what went wrong on the last project. It's quite important" Him: "Lets talk about it in a week or two. Just make a list of all the things you did wrong" Me: "We already have a new project and we want to prevent what happened on the last project to happen again" Him: "Just do it and well have our meeting in a week, make a list of all the thing you did wrong." It kind of ended there then he organized a meeting at a moment I wasn't unable to come. My friend discussed with him and tried to explained him that we really had to discuss about organization issue on how to manage a project. And his answer was pretty much: "During the meeting I don't want to ear how you want to us to manage a project but I want to know what you guys did wrong" After that I felt it wasn't even worth it discussing anything since they weren't even ready listening to us. Found a new job and I'm pretty happy with my choice. I'd like to know how you'd handle such situation. Is there anything to do to solve communication problem? After that project my friend got a depression and some other employee had their down too as far as I know. I wonder what else we can do other than leave these place as soon as possible. Feel sad for the people that are still there and get screamed at just because they need money in order to eat and finding an other job like that isn't that easy. note I died a little when our boss asked us to make a list of things we (programmers) did wrong. This is probably the stupidest request I ever got. If everybody thinks they did everything right, it doesn't mean that there is no problems. Individual problem are rarely the big issue. Colleagues help each others and solve theses issues to prevent problems.

  Read the article

• Need hard disk recommendation for linux home server.

  - by neotracker

  Hello, I'm planing to build a little linux homeserver. It will mainly be used for storage and maybe as an media pc. I plan to build a software raid5 with 4 1.5TB or 2TB hard drives. I already decided to use the Western Digital Caviar Green 1.5 TB drive, but then I read about some problems with the WD green series about many drives failing and that they are not recommended for raid anyway. Of course, I couldn't find much facts on the issues so I thought I just ask here ;-) What hard drives would you recommended for a software raid5 setup? As I only need it for storage, the whole thing doesn't have to be too fast. So I prefer a cheap price and silence to great performance.

  Read the article

• How do I tell if my solid state hard disk is bad?

  - by Guy

  I have a Windows 7 Ultimate computer (Shuttle) that I built myself and in it I put a Solid State Drive (SSD). It's been working well for a number of months but now when I start it there are problems. I have 2 users setup on the computer and when I try and sign in with either user it claims that the password is incorrect. I could understand the odd typo but I've had my wife try it as well and we've got the passwords correct. On top of that it will remain at the login screen for 1 minute and 20 seconds and then spontaneously reboot without shutting down. So I'm trying to work out if this is a hard disk problem or something else. Any ideas? (I have a nightly backup to a WHS so it will be easy to recover but I don't want to do that unless I have to and don't want to waste time putting in a new HD just to discover it's something else.)

  Read the article

• Nifty default controls prevent the rest of my game from rendering

  - by zergylord

  I've been trying to add a basic HUD to my 2D LWJGL game using nifty gui, and while I've been successful in rendering panels and static text on top of the game, using the built-in nifty controls (e.g. an editable text field) causes the rest of my game to not render. The strange part is that I don't even have to render the gui control, merely declaring it appears to cause this problem. I'm truly lost here, so even the vaguest glimmer of hope would be appreciated :-) Some code showing the basic layout of the problem: display setup: // load default styles nifty.loadStyleFile("nifty-default-styles.xml"); // load standard controls nifty.loadControlFile("nifty-default-controls.xml"); screen = new ScreenBuilder("start") {{ layer(new LayerBuilder("baseLayer") {{ childLayoutHorizontal(); //next line causes the problem control(new TextFieldBuilder("input","asdf") {{ width("200px"); }}); }}); }}.build(nifty); nifty.gotoScreen("start"); rendering glMatrixMode(GL_PROJECTION); glLoadIdentity(); GLU.gluOrtho2D(0f,WINDOW_DIMENSIONS[0],WINDOW_DIMENSIONS[1],0f); //I can remove the 2 nifty lines, and the game still won't render nifty.render(true); nifty.update(); glMatrixMode(GL_PROJECTION); glLoadIdentity(); GLU.gluOrtho2D(0f,(float)VIEWPORT_DIMENSIONS[0],0f,(float)VIEWPORT_DIMENSIONS[1]); glTranslatef(translation[0],translation[1],0); for (Bubble bubble:bubbles){ bubble.draw(); } for (Wall wall:walls){ wall.draw(); } for(Missile missile:missiles){ missile.draw(); } for(Mob mob:mobs){ mob.draw(); } agent.draw();

  Read the article

• How to set up virtual users in vsftpd?

  - by ares94

  I've read this tutorial: http://howto.gumph.org/content/setup-virtual-users-and-directories-in-vsftpd/ My configuration is as follow: ---vsftpd.conf--- listen=YES anonymous_enable=NO local_enable=YES virtual_use_local_privs=YES write_enable=YES connect_from_port_20=YES pam_service_name=vsftpd guest_enable=YES user_sub_token=$USER local_root=/var/www/sites/$USER chroot_local_user=YES hide_ids=YES ---/etc/pam.d/vsftpd--- auth required pam_pwdfile.so pwdfile /etc/vsftpd/passwd account required pam_permit.so I created file /etc/vsftpd/passwd and added users using htaccess. I tried to login but it didn't work: ftp 127.0.0.1 Connected to 127.0.0.1 (127.0.0.1). 220 vsFTPd 2.3.5+ (ext.1) ready... Name (127.0.0.1:root): user1 331 Please specify the password. Password: 530 Permission denied. Login failed. Everything seems fine accept the permission denied thing. How can I fix this?

  Read the article

• Route multiple subdomains on one external ip to multiple internal ips

  - by Abenil

  i have several subdomains(git.example.org, build.example.org, etc.), i have a router with an external ip and i have several virtual machines on a host computer with internal ips. Now i want to route git.example.org to internal ip 10.0.2.1 and build.example.org to internal ip 10.0.2.2. How can I do this? I setup in the Router that all traffic on port 80 is comming to my host computer with internal ip 10.0.2.3 and installed Squid on that computer. I added the following lines to the squid.conf file: cache_peer 10.0.2.1 parent 80 0 no-query originserver name=server_1 cache_peer_domain server_1 git.example.org cache_peer 10.0.2.2 parent 80 0 no-query originserver name=server_2 cache_peer_domain server_2 build.example.org But this is not working for me. :( Any help appreciated. Regards Nils Update: Here is the solution for Apache http://serverfault.com/a/273693

  Read the article

• emails getting sent with wrong "from" address

  - by Errol Gongson

  I have a postfix/dovecot system setup on Ubuntu 10.04, and it sends/receives emails fine, but when I send emails they are all from [email protected]. For example, I have a user called "info" and when I try to send an email using mutt from this Mailbox "/home/vmail/mydomain.com/info/Maildir" the email will send find but it will be from "[email protected]" and not "[email protected]". I have 3 mailboxes (/home/vmail/mydomain.com/root/Maildir, /home/vmail/mydomain.com/root/postmaster, and /home/vmail/mydomain.com/root/info) and they all send and receive emails. I am new to postfix and dovecot... can someone who knows what they are doing help me out on this one?? 30 myhostname = mail.mydomain.com 31 alias_maps = hash:/etc/aliases 32 alias_database = hash:/etc/aliases 33 myorigin = mydomain.com #have tried setting myorigin = mail.mydomain.com and still same problem 34 mydestination = mail.mydomain.com, localhost, localhost.localdomain 35 relayhost = 36 mynetworks = 127.0.0.0/8 37 mailbox_size_limit = 0 38 recipient_delimiter = + 39 inet_interfaces = all 40 html_directory = /usr/share/doc/postfix/html 41 message_size_limit = 30720000 42 virtual_alias_domains = This is from the aliases file postmaster: root root: [email protected]

  Read the article

< Previous Page | 462 463 464 465 466 467 468 469 470 471 472 473  | Next Page >