Search Results

Search found 15670 results on 627 pages for 'multi level'.

Page 469/627 | < Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >

  • Parallel Port Problem in 12.04

    - by Frank Oberle
    I have a “dumb” printer attached to a parallel port in my machine which works fine under the “other” resident operating system (from Redmond) on the same machine. I recently added Ubuntu 12.04 as a dual boot on the machine, but Ubuntu doesn't seem to recognize the parallel port at all. All I need to set up a printer is a really plain-vanilla fixed pitch text-only generic driver, which is present, but no parallel ports show up. (The other printers, all on USB ports, seem to work just fine). Following what appeared to me to be the most reasonable of the many conflicting pieces of advice on the web, here's what I did: I added the following lines to /etc/modules parport_pc ppdev parport Then, after rebooting, I checked to see that the lines were still present, and they were. I ran dmesg | grep par and got the following references in the output that seemed like they might have to do with the parallel port: [ 14.169511] parport_pc 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.169516] PCI parallel port detected: 9710:9805, I/O at 0xce00(0xcd00), IRQ 21 [ 14.169577] parport0: PC-style at 0xce00 (0xcd00), irq 21, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 14.354254] lp0: using parport0 (interrupt-driven). [ 14.571358] ppdev: user-space parallel port driver [ 16.588304] type=1400 audit(1347226670.386:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=964 comm="apparmor_parser" [ 16.588756] type=1400 audit(1347226670.386:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=964 comm="apparmor_parser" [ 16.673679] type=1400 audit(1347226670.470:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 16.675252] type=1400 audit(1347226670.470:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 16.675716] type=1400 audit(1347226670.470:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1014 comm="apparmor_parser" [ 16.676636] type=1400 audit(1347226670.474:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1015 comm="apparmor_parser" [ 16.677124] type=1400 audit(1347226670.474:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1015 comm="apparmor_parser" [ 1545.725328] parport0: ppdev0 forgot to release port I have no idea what any of that means, but the line “parport0: ppdev0 forgot to release port ” seems unusual. I was still unable to add a printer for my old clunker, so I tried the direct approach, typing echo “Hello” > /dev/lp0 and received a Permission denied message. I then tried echo “Hello” > /dev/parport0 which didn't give me any message at all, but still didn't print anything. Running the command sudo /usr/lib/cups/backend/parallel gives the following: direct parallel:/dev/lp0 "unknown" "LPT #1" "" "" Checking the permissions for /dev/parport0, Owner, Group, and Other are all set to read and write. crw-rw---- 1 root lp 6, 0 Sep 9 16:37 /dev/lp0 crw-rw-rw- 1 root lp 99, 0 Sep 9 16:37 /dev/parport0 The output of the command lpinfo -v includes the following line: direct parallel:/dev/lp0 I've read several web postings that seem to suggest this has been a problem for several years, but the bug reports were closed because there wasn't enough information to address the issue (shades of Microsoft!). Any suggestions as to what I might be missing here?

    Read the article

  • How granular should a command be in a CQ[R]S model?

    - by Aaronaught
    I'm considering a project to migrate part of our WCF-based SOA over to a service bus model (probably nServiceBus) and using some basic pub-sub to achieve Command-Query Separation. I'm not new to SOA, or even to service bus models, but I confess that until recently my concept of "separation" was limited to run-of-the-mill database mirroring and replication. Still, I'm attracted to the idea because it seems to provide all the benefits of an eventually-consistent system while sidestepping many of the obvious drawbacks (most notably the lack of proper transactional support). I've read a lot on the subject from Udi Dahan who is basically the guru on ESB architectures (at least in the Microsoft world), but one thing he says really puzzles me: As we get larger entities with more fields on them, we also get more actors working with those same entities, and the higher the likelihood that something will touch some attribute of them at any given time, increasing the number of concurrency conflicts. [...] A core element of CQRS is rethinking the design of the user interface to enable us to capture our users’ intent such that making a customer preferred is a different unit of work for the user than indicating that the customer has moved or that they’ve gotten married. Using an Excel-like UI for data changes doesn’t capture intent, as we saw above. -- Udi Dahan, Clarified CQRS From the perspective described in the quotation, it's hard to argue with that logic. But it seems to go against the grain with respect to SOAs. An SOA (and really services in general) are supposed to deal with coarse-grained messages so as to minimize network chatter - among many other benefits. I realize that network chatter is less of an issue when you've got highly-distributed systems with good message queuing and none of the baggage of RPC, but it doesn't seem wise to dismiss the issue entirely. Udi almost seems to be saying that every attribute change (i.e. field update) ought to be its own command, which is hard to imagine in the context of one user potentially updating hundreds or thousands of combined entities and attributes as it often is with a traditional web service. One batch update in SQL Server may take a fraction of a second given a good highly-parameterized query, table-valued parameter or bulk insert to a staging table; processing all of these updates one at a time is slow, slow, slow, and OLTP database hardware is the most expensive of all to scale up/out. Is there some way to reconcile these competing concerns? Am I thinking about it the wrong way? Does this problem have a well-known solution in the CQS/ESB world? If not, then how does one decide what the "right level" of granularity in a Command should be? Is there some "standard" one can use as a starting point - sort of like 3NF in databases - and only deviate when careful profiling suggests a potentially significant performance benefit? Or is this possibly one of those things that, despite several strong opinions being expressed by various experts, is really just a matter of opinion?

    Read the article

  • Best Frameworks/libraries/engines for 2D multiplayer C# Webbased RPG

    - by Thirlan
    Title is a mouthful but important because I'm looking to meet a specific criteria and it's complex enough that I need a lot of help in finding what I'm looking for. I really want people's suggestions because I trust it a lot more than anything else, so I just need to clearly define what it is I want heh : P Game is a 2D RPG. Think of Secret of Mana. Game is online multiplayer, but not MMO sized. Game must be webbased! I'm looking to the future and want to hit as many platforms as possible. I'm leaning to Webgl because of this, but still looking around. Since the users are seeing the game through the webbrowser the front-end should be mainly responsible for drawing, taking input and some basic checking such as preliminary collision detection. This is important because it means the game engine is NOT on the client's machine. The server should be responsible for the game engine and all the calculations. This means the server is doing all the work and the client is mostly a dumb terminal. Server language is c# I'm looking for fast project execution so I want to use as many pre-existing tools as possible. This would make sense because I'm making a game here, not an engine. I'm not creating some new revolutionary graphics or pushing the physics engines to the next level. Preference for commercially supported tools. For game mechanics reasons and for reasons 4 and 5, don't think I can use existing 2D rpg engines. I've seen them out there and I fear that if I try and use them they will have too many restrictions, but will be happy to hear out suggestions. So all this means I need a game engine on the server, or maybe just a physics engine, and then I need another engine/library to draw everything that the server is sending to the client on the webbrowser. Maybe this is how 50% of games work on the web and there are plenty of frameworks that support this! I wouldn't actually don't know : ( but my gut is telling me that most webgames are single player and 90% of the game is running on the client. So... any suggestions?

    Read the article

  • How to enable and connect to RDP on a Windows Azure Web Role Instance?

    - by Enrique Lima
    We all know there have been some updates to Windows Azure, and one of the biggest I would say is the capability of being able to remote into the “OS level” of the image running a role.  And I am not talking about VM Role, I am talking about a Web Role for example. As developers we use Visual Studio, and when we are getting ready to deploy a project, we have the option of enabling this. Here is how: 1.  We publish our Project 2. On the Deployment dialog, provide all the details for your account, and before clicking OK, click on Configure Remote Desktop connections. 3.  Enable connections and the rest of the configuration.  Now, here is where there is an extra set of steps.  The first thing to know: The certificate used here is different from the other certs you have in place.  I created a new one, the went into certmgr.msc, then to Personal, then I selected the cert I just created.  Did a right-click, then All Tasks > Export.  Because what is needed is a pfx package, make sure when exporting you select to export the private key. 4. Click OK, on the Remote Desktop Configuration screen, now before you click OK on the Deployment, you will need to visit the Azure Portal. And perform the following: Go to your hosted services. Then with the service available, select the Certificates folder location. Then, select Add Certificate from the toolbar (more like Azure Portal Ribbon) Provide the details to upload the recently create pfx file. That will create the Certificate. Click OK on the deployment dialog, this kick off the deployment process. 5. Now, we need to go to the Windows Azure Portal.  Here we will select the Web Role deployed and Configure RDP. 6. Time to test.  Click on the Instance (not the role), this will make the Remote Access Connect Button available.  A file will start the process to be downloaded too 7. You will then be prompted for the credentials you configured. 8.  Validate connectivity … 9. Open IIS Manager … From here on, this is a way to manage and work with your Instance.

    Read the article

  • PeopleSoft New Design Solves Navigation Problem

    - by Applications User Experience
    Anna Budovsky, User Experience Principal Designer, Applications User Experience In PeopleSoft we strive to improve User Experience on all levels. Simplifying navigation and streamlining access to the most important pages is always an important goal. No one likes to waste time waiting for pages to load and watching a spinning glass going on and on. Those performance-affecting server trips, page-load waits and just-too-many clicks were complained about for a long time. Something had to be done. A few new designs came in PeopleSoft 9.2 helping users to access their everyday work areas easier and faster. For example, Dashboard and Work Center aggregate most accessed information sections on a single page; Related Information allows users to complete transaction-related-research without interrupting a transaction and Secure Search gets users to a specific page directly. Today we’ll talk about the Actions menu. Most PeopleSoft pages are shared between individual products and product lines. It means changing the content on a single page involves Oracle development and quality assurance time for making and testing the changes. In order to streamline the navigation and cut down on accessing PeopleSoft pages one-page-at-a-time, we introduced a new menu design. The new menu allows accessing shared pages without the Oracle development team making any local changes, and it works as an additional one-click-path to specific high-traffic actionable pages. Let’s look at how many steps it took to Change Salary for an employee in HCM 9.1 before: Figure 1. BEFORE: The 6 steps a user would take to Change Salary in PeopleSoft HCM 9.1 In PeopleSoft 9.1 it took 5 steps + page loading time + additional verification time for making sure a correct employee is selected from the table. In PeopleSoft 9.2 it only takes 2 steps. To complete Ad Hoc Change Salary action, the user can start from the HCM Manager's Dashboard, click the Action menu within a table, choose a menu option, and access a correct employee’s details page to take an action. Figure 2. AFTER: The 2 steps a user would take to Change Salary in PeopleSoft HCM 9.2 The new menu is placed on a row level which ensures the user accesses the correct employee’s details page. The Actions menu separates menu options into hierarchical sections which help to scan and access the correct option quickly. The new menu’s small size and its structure enabled users to access high-traffic pages from any page and from any part of the page. No more spinning hourglass, no more multiple pages upload. The flexible design fits anywhere on a page and provides a fast and reliable path to the correct destination within the product. Now users can: Access any target page no matter how far it is buried from the starting point; Reduce navigation and page-load time; Improve productivity and reduce errors. The new menu design is available and widely used in all PeopleSoft 9.2 product lines.

    Read the article

  • Facial Recognition for Retail

    - by David Dorf
    My son decided to do his science project on how the brain recognizes faces.  Faces are so complicated and important that the brain has a dedicated area for just that purpose.  During our research, we came across some emerging uses for facial recognition in the retail industry. If you believe the movies, recognizing faces as they walk by a camera is easy for computers but that's not the reality.  Huge investments are being made by the U.S. government in this area, with a focus on airport security.  Now, companies like Eye See are leveraging that research for marketing purposes.  They do things like track eyes while viewing newspaper ads to see which ads get more "eye time."  This can help marketers make better placement and color decisions. But what caught my eye (that was too easy) was their new mannequins that watch shoppers.  These mannequins, being tested at European retailers like Benetton, watch shoppers that walk by and identify their gender, race, and age.  This helps the retailer better understand the types of customers being attracted to the outfit on the mannequin.  Of course to be most accurate, the software has pictures of the employees so they can be filtered out.  Since the mannequins are closer to the shoppers and at eye-level, they are more accurate than traditional in-ceiling LP cameras. Marketing agency RedPepper is offering retailers the ability to recognize loyalty shoppers at their doors using Facedeal.  For customers that have opted into the program, when they enter the store their face is recognized and they are checked in.  Then, as a reward, they are sent an offer on their smartphone. It won't be long before retailers begin to listen to shoppers are they walk the aisles, then keywords can be collected and aggregated to give the retailer an idea of what people are saying about their stores and products.  Sentiment analysis based on what's said or even facial expressions can't be far off. Clearly retailers need to be cautions and respect customer privacy.  That's why these technologies are emerging slowly.  But since the next generation of shoppers are less concerned about privacy, I expect these technologies to appear sporadically in the next five years then go mainstream.  Time will tell.

    Read the article

  • Has test driven development (TDD) actually benefited a real world project?

    - by James
    I am not new to coding. I have been coding (seriously) for over 15 years now. I have always had some testing for my code. However, over the last few months I have been learning test driven design/development (TDD) using Ruby on Rails. So far, I'm not seeing the benefit. I see some benefit to writing tests for some things, but very few. And while I like the idea of writing the test first, I find I spend substantially more time trying to debug my tests to get them to say what I really mean than I do debugging actual code. This is probably because the test code is often substantially more complicated than the code it tests. I hope this is just inexperience with the available tools (RSpec in this case). I must say though, at this point, the level of frustration mixed with the disappointing lack of performance is beyond unacceptable. So far, the only value I'm seeing from TDD is a growing library of RSpec files that serve as templates for other projects/files. Which is not much more useful, maybe less useful, than the actual project code files. In reading the available literature, I notice that TDD seems to be a massive time sink up front, but pays off in the end. I'm just wondering, are there any real world examples? Does this massive frustration ever pay off in the real world? I really hope I did not miss this question somewhere else on here. I searched, but all the questions/answers are several years old at this point. It was a rare occasion when I found a developer who would say anything bad about TDD, which is why I have spent as much time on this as I have. However, I noticed that nobody seems to point to specific real-world examples. I did read one answer that said the guy debugging the code in 2011 would thank you for have a complete unit testing suite (I think that comment was made in 2008). So, I'm just wondering, after all these years, do we finally have any examples showing the payoff is real? Has anybody actually inherited or gone back to code that was designed/developed with TDD and has a complete set of unit tests and actually felt a payoff? Or did you find that you were spending so much time trying to figure out what the test was testing (and why it was important) that you just tossed out the whole mess and dug into the code?

    Read the article

  • ArchBeat Link-o-Rama for 10-24-2012

    - by Bob Rhubart
    Play Oracle Vanquisher Here's a little respite from whatever it is you normally spend your time on. Oracle Vanquisher is an online diversion that makes a game of data center optimization. According to the description: "Armed with a cool Oracle vacuum pack suit and a strategic IT roadmap, you will thwart threats and optimize your data center to increase your company’s stock price and boost your company's position." Mainly you avoid electric shock and killer birds. The current high score belongs to someone identified as "TEN." My score? Never mind. Book: DevOps for Developers | The Java Source The subject of DevOps has come up in a couple of recent OTN ArchBeat Podcasts, so it's somewhat serendipitous that Tori Weildt's recent blog post offers an overview of Java Champion Michael Hutterman's new book, DevOps for Developers, now available from Apress. Bring Your Own Device (BYOD) : Context is everything… | The ORACLE-BASE Blog BOYD is a factor in the evolution of IT, but in what context? "The real IT work in companies is still being done on PCs," says Oracle ACE Director Tim Hall. "Yes, you can use a cloud service on your phone, but look around the office and you will see those cloud services are actually being used by people on PCs." Oracle in the Cloud: Oracle EBusiness Suite sizing | Tom Laszewski Cloud expert Tom Laszewski shares several technical resources that will be helpful for sizing of Oracle EBusiness Suite. Setting Up, Configuring, and Using an Oracle WebLogic Server Cluster Author and expert Yuli Vasiliev shows you how take advantage of multiple Oracle WebLogic Server instances grouped into a cluster to maximize scalability and availability. Webcast: Reduce Costs with Oracle's Database Storage Management Watch this! Join Oracle experts Kevin Jernigan and Margaret Hamburger for an interactive webcast in which you'll learn how Oracle's Database Storage Management can reduce storage costs and management complexity while improving query performance to meet service-level agreements and compliance requirements. Event Date: Tuesday, November 6, 2012 Event Time: 10 a.m. PT/1 p.m. ET Thought for the Day "Most software today is very much like an Egyptian pyramid with millions of bricks piled on top of each other, with no structural integrity, but just done by brute force and thousands of slaves." — Alan Kay Source: softwarequotes.com

    Read the article

  • COLLABORATE 13 Call for Papers

    - by Marc Weintraub
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Attention PeopleSoft customers!  Speak at the largest user-led PeopleSoft conference of the year and attend for free! Interested in submitting a presentation for COLLABORATE 13? October 12 is the deadline to submit your abstract. The COLLABORATE 13- Quest forum is your home for high-level education sessions around PeopleSoft. Presenting doesn’t just mean giving a solo lecture: you can present with a vendor, give a demonstration (internet will be provided), facilitate a hot topic discussion or even offer best practices from an experience your company has been through. Remember, to submit an abstract now, all you need is a short description of your presentation. Think you don't have a story to tell? Think again! Check out the COLLABORATE 13- Quest forum now to better understand what we are looking for. A selection committee of other PeopleSoft users will review all sessions and select the most relevant, customer-focused sessions possible to make COLLABORATE a great learning experience for everyone. Don't forget, one speaker from each session selected will be eligible to receive a complimentary registration to the entire event *some rules apply. Also, don’t forget to include your functional counterpart. The selection committee is looking to increase the amount of functional users attending and want to help them glean the most out of the event. Thank you for your time and please let the selection committee know if you have any questions about submitting a presentation. We look forward to seeing you at COLLABORATE 13 in Denver! Quest's COLLABORATE '13 website - http://www.questdirect.org/collaborate /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • The Growing Importance of Network Virtualization

    - by user12608550
    The Growing Importance of Network Virtualization We often focus on server virtualization when we discuss cloud computing, but just as often we neglect to consider some of the critical implications of that technology. The ability to create virtual environments (or VEs [1]) means that we can create, destroy, activate and deactivate, and more importantly, MOVE them around within the cloud infrastructure. This elasticity and mobility has profound implications for how network services are defined, managed, and used to provide cloud services. It's not just servers that benefit from virtualization, it's the network as well. Network virtualization is becoming a hot topic, and not just for discussion but for companies like Oracle and others who have recently acquired net virtualization companies [2,3]. But even before this topic became so prominent, Solaris engineers were working on technologies in Solaris 11 to virtualize network services, known as Project Crossbow [4]. And why is network virtualization so important? Because old assumptions about network devices, topology, and management must be re-examined in light of the self-service, elasticity, and resource sharing requirements of cloud computing infrastructures. Static, hierarchical network designs, and inter-system traffic flows, need to be reconsidered and quite likely re-architected to take advantage of new features like virtual NICs and switches, bandwidth control, load balancing, and traffic isolation. For example, traditional multi-tier Web services (Web server, App server, DB server) that share net traffic over Ethernet wires can now be virtualized and hosted on shared-resource systems that communicate within a larger server at system bus speeds, increasing performance and reducing wired network traffic. And virtualized traffic flows can be monitored and adjusted as needed to optimize network performance for dynamically changing cloud workloads. Additionally, as VEs come and go and move around in the cloud, static network configuration methods cannot easily accommodate the routing and addressing flexibility that VE mobility implies; virtualizing the network itself is a requirement. Oracle Solaris 11 [5] includes key network virtualization technologies needed to implement cloud computing infrastructures. It includes features for the creation and management of virtual NICs and switches, and for the allocation and control of the traffic flows among VEs [6]. Additionally it allows for both sharing and dedication of hardware components to network tasks, such as allocating specific CPUs and vNICs to VEs, and even protocol-specific management of traffic. So, have a look at your current network topology and management practices in view of evolving cloud computing technologies. And don't simply duplicate the physical architecture of servers and connections in a virtualized environment…rethink the traffic flows among VEs and how they can be optimized using Oracle Solaris 11 and other Oracle products and services. [1] I use the term "virtual environment" or VE here instead of the more commonly used "virtual machine" or VM, because not all virtualized operating system environments are full OS kernels under the control of a hypervisor…in other words, not all VEs are VMs. In particular, VEs include Oracle Solaris zones, as well as SPARC VMs (previously called LDoms), and x86-based Solaris and Linux VMs running under hypervisors such as OEL, Xen, KVM, or VMware. [2] Oracle follows VMware into network virtualization space with Xsigo purchase; http://www.mercurynews.com/business/ci_21191001/oracle-follows-vmware-into-network-virtualization-space-xsigo [3] Oracle Buys Xsigo; http://www.oracle.com/us/corporate/press/1721421 [4] Oracle Solaris 11 Networking Virtualization Technology, http://www.oracle.com/technetwork/server-storage/solaris11/technologies/networkvirtualization-312278.html [5] Oracle Solaris 11; http://www.oracle.com/us/products/servers-storage/solaris/solaris11/overview/index.html [6] For example, the Solaris 11 'dladm' command can be used to limit the bandwidth of a virtual NIC, as follows: dladm create-vnic -l net0 -p maxbw=100M vnic0

    Read the article

  • It's possible to fulfill the social necessity of a human being through a social game in 3D like IMVU?

    - by Totty
    (I'm not advertising nor promoting this game, as it's just an example of my experience and I would like to have your opinion about the matter if possible) I've been started researching "things" about games and I've decided to begin to play IMVU as a friend of mine said it's cool. At first it seemed just another 3d social game, not so cool.. But I've "tried to like" and after 1 day I can say I'm addicted to it! Yes; I will explain better: About the game: You can go in chat-rooms, move to positions. Some positions are like sitting in a sofa, floor, dancing alone or with a partner, kissing and more in this way. In the free version of the game there is no nudity. You can even listen to music, view youtube... The 3d graphics are quite low end, so it's not as real as the paid PC games of today. About my experience: At first I was going with my friend in chat-rooms, they seemed very nice. There were people talking about general stuff, quite like in a real life. Well, I begin to know some girls (yes, virtual girls commanded by a real girl, I hope!). Things happened: Some girls are just crazy, not like in real life, they make out in before even talking; Other girls you can speak a little bit, then they add you to their friend-list. Sometimes they invite to their virtual places. Some girls have really IMVU boyfriends only (but not in reality) and most of them don't even make up in the game, so it's really a level of commitment involved here! But from what my friend told they last for him, at least, about 3 days... Some others have real and IMVU boyfriends that are the same. Until now I haven't find a girl with different boyfriend in the IMVU and reality. Nor multiple boyfriends. There are rooms where the same people find each selves every day and speak about general stuff, relationships and so on... They are nice with you, they "feel" you and show careness. This is what amazes me, they treat you like a real human being and as being their friend in the real world. (of course it's not always like this) There are jealous girls too and competitiveness between females lol, I know you loled! This is kind of social. So today I closed my door in my room and I've played it all day long and guess what, I didn't feel a need to stay with a real person at all. Normally, If I would stay a full day alone I would get quite crazy... So the question is: It's just me that seemed to be able to fulfill my social needs or there is something more? thanks for your precious time for reading my full question,

    Read the article

  • Should accessible members of an internal class be internal too?

    - by Jeff Mercado
    I'm designing a set of APIs for some applications I'm working on. I want to keep the code style consistent in all the classes I write but I've found that there are a few inconsistencies that I'm introducing and I don't know what the best way to resolve them is. My example here is specific to C# but this would apply to any language with similar mechanisms. There are a few classes that I need for implementation purposes that I don't necessarily want to expose in the API so I make them internal whereever needed. Generally what I would do is design the class as I normally would (e.g., make members public/protected/private where necessary) and change the visibility level of the class itself to internal. So I might have a few classes that look like this: internal interface IMyItem { ItemSet AddTo(ItemSet set); } internal class _SmallItem : IMyItem { private readonly /* parameters */; public _SmallItem(/* small item parameters */) { /* ... */ } public ItemSet AddTo(ItemSet set) { /* ... */ } } internal abstract class _CompositeItem: IMyItem { private readonly /* parameters */; public _CompositeItem(/* composite item parameters */) { /* ... */ } public abstract object UsefulInformation { get; } protected void HelperMethod(/* parameters */) { /* ... */ } } internal class _BigItem : _CompositeItem { private readonly /* parameters */; public _BigItem(/* big item parameters */) { /* ... */ } public override object UsefulInformation { get { /* ... */ } } public ItemSet AddTo(ItemSet set) { /* ... */ } } In another generated class (part of a parser/scanner), there is a structure that contains fields for all possible values it can represent. The class generated is internal too but I have control over the visibility of the members and decided to make them internal as well. internal partial struct ValueType { internal string String; internal ItemSet ItemSet; internal IMyItem MyItem; } internal class TokenValue { internal static int EQ(ItemSetScanner scanner) { /* ... */ } internal static int NAME(ItemSetScanner scanner, string value) { /* ... */ } internal static int VALUE(ItemSetScanner scanner, string value) { /* ... */ } //... } To me, this feels odd because the first set of classes, I didn't necessarily have to make some members public, they very well could have been made internal. internal members of an internal type can only be accessed internally anyway so why make them public? I just don't like the idea that the way I write my classes has to change drastically (i.e., change all uses of public to internal) just because the class is internal. Any thoughts on what I should do here? It makes sense to me that I might want to make some members of a class declared public, internal. But it's less clear to me when the class is declared internal.

    Read the article

  • How do we provide valid time estimates during Sprint Planning without doing "too much" design?

    - by Michael Edenfield
    My team is getting up to speed with Scrum, but most of us are more familiar with non-agile or "pseudo-"agile methodologies. The part that is the biggest hurdle for us is running an efficient Sprint Planning meeting where we break our backlog items into tasks, and estimate hours. (I'm using the terminology from the VS2010 Scrum Template; apologies if I use the wrong word somewhere.) When we try to figure out how long a task is going to take, we often fall into the trap of designing the feature at the code level -- table layout, interfaces, etc -- in order to figure out how long that's going to take. I'm pretty sure this is not the appropriate place to be doing that kind of design. We should be scheduling tasks for these design meetings during the sprint. However, we are having trouble figuring out how else to come up with meaningful estimates for the tasks. Are there any practical habits/techniques/etc. for making a judgement call about how long a feature is going to take, without knowing how you plan to implement it? If our time estimates are going to change significantly once the design has been completed, how can we properly budget our Sprint backlog ahead of time? EDIT: Just to clarify, since some of the comments/answers are very valid but I think addressing the wrong question. We know that what we're doing is not right, and that we should be building time into the sprint for this design. Conceptually all of the developers understand that. We also also bringing in a team member with Scrum experience to keep us on track if we start going off into the weeds. The problem is that, without going through this design process, we are finding it difficult to provide concrete time estimates for anything. We are constantly saying things like "well if we design it this way it might take 8 hours but if we end up having to do this other way instead that will take about 32 but it might not be as bad once we start trying to write it...". I also assume that this process will get better once we have some historical velocity to work from, but many of the technologies and architectural patterns we are using are new to us. But if potentially-wildly-wrong estimates are just a natural part of adapting this process then we will just need to recondition ourselves to accept that :)

    Read the article

  • Segmentation and Targeting: Your Tools for Personalizing the Online Customer Experience

    - by Christie Flanagan
    In order to deliver the kind of personalized and engaging online experiences that customers expect today, look to segmentation and targeting.  Segmentation is the practice of dividing your site visitors into distinct groups based on shared characteristics or behavior – for example, a segment may consist of site visitors who have visited pages related to certain product type, or they may consist of visitors within the same age group or geographic area.  The idea is that those within a segment are more likely to have common needs, problems or interests that can be served by your business. Targeting is the process by which the most relevant content, whether an article promotion or other piece of content, is delivered to your visitors based on their segment membership. Segmentation and targeting are used to drive greater engagement on your web presence by delivering content to your site visitors that is tailored to their interests, behavior or other attributes.  You may have a number of different goals for your segmentation and targeting efforts: Up-sell or cross-sell to your customers Conduct A/B testing on your offers and creative Offer discounts, promotions or other incentives for the time and duration that you specify Make is easier to find relevant information about products and services Create premium content model There are two different approaches you can take toward segmentation and targeting for you online customer experience initiatives. The first is more of a manual process, in which marketers manage the process of determining which segments to create and which content to target to those segments. The benefit of this approach is that it gives marketers a high level of control over the whole process which works well when you have a thorough understanding of your segments and which content is most likely to serve their needs.  Tools for marketer managed segmentation and targeting are often built right in to your WEM platform, as they are with Oracle WebCenter Sites. The downside is that the more segments and content that you have, the more time consuming and complicated in can be to manage manually.The second approach relies on predictive intelligence to automate the segmentation and targeting process.  This allows optimization of the process to occur in real time. This approach helps reduce the burden of manual segmentation and targeting and can result in new insights into segments that you may never have thought of on your own.  It also provides you with the capability to quickly test new offers and promotions on your site.  Predictive segmentation and targeting can be achieved by using Oracle WebCenter Sites and Oracle Real-Time Decisions together. *****Get a taste for how Oracle WebCenter Sites and Oracle Real-Time Decisions combine to deliver powerful capabilities for predictive segmentation and targeting by watching this on demand webcast introducing Oracle WebCenter Sites 11g or by reading IDC’s take on the latest release of Oracle’s web experience management solution.  Be sure to return to the Oracle WebCenter blog on Thursday for a closer look at how to optimize the online customer experience using these two products together.

    Read the article

  • WebCenter Content Web Search Performance: Do you really need that folder path info?

    - by Nicolas Montoya
    End-users want content at their fingertips at the speed of thought if possible. When running search operations in the WebCenter Conter Web Interface every second or fraction of a second improvement does matter. When doing some trace analysis on the systemdatabase tracing on a customer environment, we came across some SQL queries that were unnecessarily being triggered! These were related to determining the folder path for every entry part of the search result set. However, this folder path was not even being used as part of the displayed information in the user interface.Why was the folder path information being collected when it was not even displayed in the UI? We found that the configuration parameter 'FolderPathInSearchResults' was set to 'true' under Administration > Admin Server > General Configuration > Additional Configuration Variables as shown below:When executing a quicksearch by keyword we were getting 100 out of 2280 entries in the first page of the result set.When thera 'FolderPathInSearchResults' configuration parameter is set to 'true', the following queries appear in the systemdatabase tracing:100 executions for a query on the FolderFiles table for each of the documents displayed in the first page:>systemdatabase/6       12.13 11:17:48.188      IdcServer-199   1.45 ms. SELECT * FROM FolderFiles WHERE dDocName='SLC02VGVUSORAC140641' AND fLinkRank=0[Executed. Returned row(s): true]382 executions for a query of the folders tables - most of the documents that match the keyword criteria are at a folder depth level of three or four:>systemdatabase/6       12.13 11:17:48.114      IdcServer-199   2.57 ms. SELECT FolderFolders.*,FolderMetaDefaults.* FROM FolderFolders,FolderMetaDefaults WHERE FolderFolders.fFolderGUID=FolderMetaDefaults.fFolderGUID(+) AND((FolderFolders.fFolderGUID = '1EB8E527E19B09ED3FE82EE310AEA13A' ) )[Executed.Returned row(s): true]By setting this 'FolderPathInSearchResults' configuration parameter to 'false', the above queries were no longer reported in the Server Output System Audit Information.Now, let's consider a practical scenario:Search result set page = 100Average folder depth der document in the search result set: 5The number of folder path related queries will be: 100 + 5*500 = 600If each query takes slightly over 3 ms. You would have 2000 ms (2 seconds) spent in server time to get this information.The overall performance impact goes beyond seerver time execution, as this information needs to travel from the server to the browser. If the documents are further nested into the folder hierarchy, additional hundreds of queries may be executed. If folder path is not being displayed in the end-user interface profile, your system may be better of with the 'FolderPathInSearchResults' configuration parameter disabled.

    Read the article

  • Does it make the game more fun when the user is forced to progress thru the levels sequentially rather than letting them pick and play?

    - by BeachRunnerJoe
    Hello. For the first time in my game, I'm stuck with a real design dilemma. I guess that's a good thing ;) I'm building a word puzzle game that has five levels, each with 30 puzzles. Currently, the user has to solve one puzzle at a time before moving to the next. However, I'm finding the user occasionally gets stuck on a puzzle, at which point they can no longer play until they solve it. This is obviously bad because many people will just quit playing the game and delete the app since they get frustrated and can't play any other puzzles until the current puzzle is solved. The only elegant solution I can find to helping the player get unstuck is changing the design of the game to allow the users to pick any puzzle to play at any time. This way, if they get stuck, they can come back to it later and at least they have other puzzles to play in the meantime. It's my opinion, however, that this new flow design doesn't make the game as fun as the original flow design where the player has to complete a puzzle before moving to the next. To me, it's like anything else, when you only have one of something, it's more enjoyable, but when you have 30 of something, it's far less enjoyable. In fact, when I present the user with 30 puzzles to choose from that they need to solve before unlocking the next level, it almost seems as tho I'm making them feel like it's work they have to do. I even had a tester voluntarily tell me that being forced to complete a puzzle before moving to the next is more motivating. My questions are... Do you agree/disagree? Do you have any suggestions for how I can help the player get unstuck? Thanks so much in advance for your thoughts! EDIT: I should mention that I've already considered a few other solutions to helping the user get unstuck, but none of them seem like good ideas. They are... Add more hints: Currently, the user gets two hints per puzzle. If I increase the hint count, it only makes the game more easy and still leaves the possibility of the user getting stuck. Add a "Show Solution" button: This seems like a bad idea because it's my opinion this takes the fun out of the game for many people who would probably otherwise solve the puzzle if they didn't have the quick option to see the solution.

    Read the article

  • Intern Screening - Software 'Quiz'

    - by Jeremy1026
    I am in charge of selecting a new software development intern for a company that I work with. I wanted to throw a little 'quiz' at the applicants before moving forth with interviews so as to weed out the group a little bit to find some people that can demonstrate some skill. I put together the following quiz to send to applicants, it focuses only on PHP, but that is because that is what about 95% of the work will be done in. I'm hoping to get some feedback on A. if its a good idea to send this to applicants and B. if it can be improved upon. # 1. FizzBuzz # Write a small application that does the following: # Counts from 1 to 100 # For multiples of 3 output "Fizz" # For multiples of 5 output "Buzz" # For multiples of 3 and 5 output "FizzBuzz" # For numbers that are not multiples of 3 nor 5 output the number. <?php ?> # 2. Arrays # Create a multi-dimensional array that contains # keys for 'id', 'lot', 'car_model', 'color', 'price'. # Insert three sets of data into the array. <?php ?> # 3. Comparisons # Without executing the code, tell if the expressions # below will return true or false. <?php if ((strpos("a","abcdefg")) == TRUE) echo "True"; else echo "False"; //True or False? if ((012 / 4) == 3) echo "True"; else echo "False"; //True or False? if (strcasecmp("abc","ABC") == 0) echo "True"; else echo "False"; //True or False? ?> # 4. Bug Checking # The code below is flawed. Fix it so that the code # runs properly without producing any Errors, Warnings # or Notices, and returns the proper value. <?php //Determine how many parts are needed to create a 3D pyramid. function find_3d_pyramid($rows) { //Loop through each row. for ($i = 0; $i < $rows; $i++) { $lastRow++; //Append the latest row to the running total. $total = $total + (pow($lastRow,3)); } //Return the total. return $total; } $i = 3; echo "A pyramid consisting of $i rows will have a total of ".find_3d_pyramid($i)." pieces."; ?> # 5. Quick Examples # Create a small example to complete the task # for each of the following problems. # Create an md5 hash of "Hello World"; # Replace all occurances of "_" with "-" in the string "Welcome_to_the_universe." # Get the current date and time, in the following format, YYYY/MM/DD HH:MM:SS AM/PM # Find the sum, average, and median of the following set of numbers. 1, 3, 5, 6, 7, 9, 10. # Randomly roll a six-sided die 5 times. Store the 5 rolls into an array. <?php ?>

    Read the article

  • Do other developers feel that as they get better, it becomes harder to get jobs?

    - by nbv4
    When I was starting out, it seemed I had a much better time getting interviews and passing them. But now that I'm more experienced, I'm finding that its harder and harder to find a job. Do other developers out there feel the same way? I'll give you an example. I did an interview last Wednesday. It was a small start-up with only one other engineer and the CEO. They flew me in from Ohio (they are SF based). When I got there, they had me write them a link shortener, which took me about 10 minutes to write. I was supposed to be there all day working on this. When I finished it early, the interviewer seemed kind of shocked. After that, we were talking, and I asked him what they use to store data. He told me Mongo. I ask why he decided to use mongo. He then stammered and mumbled his answer, which basically boiled down to "We're using it because Mongo is a the trendy database technology and we don't want to be left out", which I've found is pretty much most common reason people use NoSQL these days. The interviewer quickly ended the interview and pretty much shoved me out the door. I was supposed to have lunch with the CEO, but I he kicked me out before I had a chance. The intervier wasn't mean or rude, (and neither was I). After I got back to Ohio, I got an email from them saying "I wasn't a fit". This sot of thing happens to me all the time. I'm starting to think "not a fit" can sometimes mean "are too high of a skill level that we are". Is this all in my head, or do other experienced developers notice the same thing happening? Back when I used to struggle with coding problems, I would work with the interviewer and it would be a positive thing and I'd get hired. But now I usually blow through the coding part, and the interviewer being left speechless is working against me. Should I feign struggling with coding problems?

    Read the article

  • Is it OK to repeat code for unit tests?

    - by Pete
    I wrote some sorting algorithms for a class assignment and I also wrote a few tests to make sure the algorithms were implemented correctly. My tests are only like 10 lines long and there are 3 of them but only 1 line changes between the 3 so there is a lot of repeated code. Is it better to refactor this code into another method that is then called from each test? Wouldn't I then need to write another test to test the refactoring? Some of the variables can even be moved up to the class level. Should testing classes and methods follow the same rules as regular classes/methods? Here's an example: [TestMethod] public void MergeSortAssertArrayIsSorted() { int[] a = new int[1000]; Random rand = new Random(DateTime.Now.Millisecond); for(int i = 0; i < a.Length; i++) { a[i] = rand.Next(Int16.MaxValue); } int[] b = new int[1000]; a.CopyTo(b, 0); List<int> temp = b.ToList(); temp.Sort(); b = temp.ToArray(); MergeSort merge = new MergeSort(); merge.mergeSort(a, 0, a.Length - 1); CollectionAssert.AreEqual(a, b); } [TestMethod] public void InsertionSortAssertArrayIsSorted() { int[] a = new int[1000]; Random rand = new Random(DateTime.Now.Millisecond); for (int i = 0; i < a.Length; i++) { a[i] = rand.Next(Int16.MaxValue); } int[] b = new int[1000]; a.CopyTo(b, 0); List<int> temp = b.ToList(); temp.Sort(); b = temp.ToArray(); InsertionSort merge = new InsertionSort(); merge.insertionSort(a); CollectionAssert.AreEqual(a, b); }

    Read the article

  • Framework for Everything - Where to begin? [Longer post]

    - by SquaredSoft
    Back story of this question, feel free to skip down for the specific question Hello, I've been very interested in the idea of abstract programming the last few years. I've made about 30 attempts at creating a piece of software that is capable of almost anything you throw at it. I've undertook some attempts at this that have taken upwards of a year, while getting close, never releasing it beyond my compiler. This has been something I've always tried wrapping my head around, and something is always missing. With the title, I'm sure you're assuming, "Yes of course you noob! You can't account for everything!" To which I have to reply, "Why not?" To give you some background into what I'm talking about, this all started with doing maybe a shade of gray hat SEO software. I found myself constantly having to create similar, but slightly different sets of code. I've gone through as many iterations of way to communicate on http as the universe has particles. "How many times am I going to have to write this multi-threaded class?" is something I found myself asking a lot. Sure, I could create a class library, and just work with that, but I always felt I could optimize what I had, which often was a large undertaking and typically involved frequent use of the CRTL+A keyboard shortcut, mixed with the delete button. It dawned on me that it was time to invest in a plugin system. This would allow me to simply add snippets of code. as time went on, and I could subversion stuff out, and distribute small chunks of code, rather than something that encompasses only a specific function or design. This comes with its own complexity, of course, and by the time I had finished the software scope for this addition, it hit me that I would want to add to everything in the software, not just a new http method, or automation code for a specific website. Great, we're getting more abstract. However, the software that I have in my mind comes down to a quite a few questions regarding its execution. I have to have some parameters to what I am going to do. After writing what the perfect software would do in my mind, I came up with this as a list of requirements: Should be able to use networking A "Macro" or "Expression system" which would allow people to do something like : =First(=ParseToList(=GetUrl("http://www.google.com?q=helloworld!"), Template.Google)) Multithreaded Able to add UI elements through some type of XML -- People can make their own addons etc. Can use third party API through the plugins, such as Microsoft CRM, Exchange, etc. This would allow the software to essentially be used for everything. Really, any task you wish to automate, in a simple way. Making the UI was as also extremely hard. How do you do all of this? Its very difficult. So my question: With so many attempts at this, I'm out of ideas how to successfully complete this. I have a very specific idea in my mind, but I keep failing to execute it. I'm a self taught programmer. I've been doing it for years, and work professionally in it, but I've never encountered something that would be as complex and in-depth as a system which essentially does everything. Where would you start? What are the best practices for design? How can I avoid constantly having to go back and optimize my software. What can I do to generalize this and draw everything out to completion. These are things I struggle with. P.s., I'm using c# as my main language. I feel like in this example, I might be hitting the outer limit of the language, although, I don't know if that is the case, or if I'm just a bad programmer. Thanks for your time.

    Read the article

  • Configuring trace file size and number in WebCenter Content 11g

    - by Kyle Hatlestad
    Lately I've been doing a lot of debugging using the System Output tracing in WebCenter Content 11g.  This is built-in tracing in the content server which provides a great level of detail on what's happening under the hood.  You can access the settings as well as a view of the tracing by going to Administration -> System Audit Information.  From here, you can select the tracing sections to include.  Some of my personal favorites are searchquery,  systemdatabase, userstorage, and indexer.  Usually I'm trying to find out some information regarding a search, database query, or user information.  Besides debugging, it's also very helpful for performance tuning. One of the nice tricks with the tracing is it honors the wildcard (*) character.  So you can put in 'schema*' and gather all of the schema related tracing.  And you can notice if you select 'all' and update, it changes to just a *.   To view the tracing in real-time, you simply go to the 'View Server Output' page and the latest tracing information will be at the bottom. This works well if you're looking at something pretty discrete and the system isn't getting much activity.  But if you've got a lot of tracing going on, it would be better to go after the trace log file itself.  By default, the log files can be found in the <content server instance directory>/data/trace directory. You'll see it named 'idccs_<managed server name>_current.log.  You may also find previous trace logs that have rolled over.  In this case they will identified by a date/time stamp in the name.  By default, the server will rotate the logs after they reach 1MB in size.  And it will keep the most recent 10 logs before they roll off and get deleted.  If your server is in a cluster, then the trace file should be configured to be local to the node per the recommended configuration settings. If you're doing some extensive tracing and need to capture all of the information, there are a couple of configuration flags you can set to control the logs. #Change log size to 10MB and number of logs to 20FileSizeLimit=10485760FileCountLimit=20 This is set by going to Admin Server -> General Configuration and entering them in the Additional Configuration Variables: section.  Restart the server and it should take on the new logging settings. 

    Read the article

  • Create simple jQuery plugin

    - by ybbest
    In the last post, I have shown you how to add the function to jQuery. In this post, I will show you how to create plugin to achieve this. 1. You need to wrap your code in the following construct, this is because you should not use $ directly as $ is global variable, it could have clash with some other library which also use $.Basically, you can pass in jQuery object into the function, so that $ is made available inside the function. (JavaScript use function to create scope, so you can make sure $ is referred to jQuery inside the function ) (function($){ //Your code goes here. }; })(jQuery); 2. Put your code into the construct above. (function ($) { $.getParameterByName = function (name) { name = name.replace(/[\[]/, "\\\[").replace(/[\]]/, "\\\]"); var regexS = "[\\?&]" + name + "=([^&#]*)"; var regex = new RegExp(regexS); var results = regex.exec(window.location.search); if (results == null) return ""; else return decodeURIComponent(results[1].replace(/\+/g, " ")); }; })(jQuery); 3. Now you can reference the code into you project and you can call the method in you JavaScript References: Provides scope for variables Variables are scoped at the function level in javascript. This is different to what you might be used to in a language like C# or Java where the variables are scoped to the block. What this means is if you declare a variable inside a loop or an if statement, it will be available to the entire function. If you ever find yourself needing to explicitly scope a variable inside a function you can use an anonymous function to do this. You can actually create an anonymous function and then execute it straight away and all the variables inside will be scoped to the anonymous function: (function() { var myProperty = "hello world"; alert(myProperty); })(); alert(typeof(myProperty)); // undefined How does an anonymous function in JavaScript work? Building Your First jQuery Plugin A Plugin Development Pattern

    Read the article

  • Hyper-V for Developers Part 1 Internal Networks

    Over the last year, weve been working with Microsoft to build training and demo content for the next version of Office Communications Server code-named Microsoft Communications Server 14.  This involved building multi-server demo environments in Hyper-V, getting them running on demo servers which we took to TechEd, PDC, and other training events, and sometimes connecting the demo servers to the show networks at those events.  ITPro stuff that should scare the hell out of a developer! It can get ugly when I occasionally have to venture into ITPro land.  Lets leave it at that. Having gone through this process about 10 to 15 times in the last year, I finally have it down.  This blog series is my attempt to put all that knowledge in one place if anything, so I can find it somewhere when I need it again.  Ill start with the most simple scenario and then build on top of it in future blog posts. If youre an ITPro, please resist the urge to laugh at how trivial this is. Internal Hyper-V Networks Lets start simple.  An internal network is one that intended only for the virtual machines that are going to be on that network it enables them to communicate with each other. Create an Internal Network On your host machine, fire up the Hyper-V Manager and click the Virtual Network Manager in the Actions panel. Select Internal and leave all the other default values. Give the virtual network a name, and leave all the other default values. After the virtual network is created, open the Network and Sharing Center and click Change Adapter Settings to see the list of network connections. The only thing I recommend that you do is to give this connection a friendly label, e.g. Hyper-V Internal.  When you have multiple networks and virtual networks on the host machines, this helps group the networks so you can easily differentiate them from each other.  Otherwise, dont touch it, only bad things can happen. Connect the Virtual Machines to the Internal Network Im assuming that you have more than 1 virtual machine already configured in Hyper-V, for example a Domain Controller, and Exchange Server, and a SharePoint Server. What you need to do is basically plug in the network to the virtual machine.  In order to do this, the machine needs to have a virtual network adapter.  If the VM doesnt have a network adapter, open the VMs Settings and click Add Hardware in the left pane.  Choose the virtual network to which to bind the adapter to. If you already have a virtual network adapter on the VM, simply connect it to the virtual network. Assign IP Addresses to the Virtual Machines on the Internal Network Open the Network and Sharing Center on your VM, there should only be 1 network at this time.  Open the Properties of the connection, select Internet Protocol Version 4 (TCP/IPv4) and hit Properties. In this environment, Im assigning IP addresses as 192.168.0.xxx.  This particular VM has an IP address of 192.168.0.40 with a subnet mask of 255.255.255.0, and a DNS Server of 192.168.0.18.  DNS is running on the Domain Controller VM which has an IP address of 192.168.0.18. Repeat this process on every VM in your environment, obviously assigning a unique IP address to each.  In an environment with a domain controller, you should now be able to ping the machines from each other. What Next? After completing this process, heres what you still cannot do: Access the internet from any of the VMs Remote desktop to a VM from the host Remote desktop to a VM over the network In the next post, well take a look configuring an External network adapter on the virtual machines.  Well then build on top of that so that you can RDP into the VMs from the host machine and over the network.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Fast Data Executive Round Table FY14 event kit

    - by JuergenKress
    We are very interested to run joint marketing events jointly with you as our partners! At our SOA Community Workspace (SOA Community membership required) you can find a new Fast Data Executive Round Table FY14 event kit. This event is designed at senior IT and executives level for the purposes of education, awareness, and thought leadership around the subject of big data; and a specific flavor of big data - Fast Data - that has begun to spark the imagination of many Oracle customers. Fast Data is not new. It’s a term that was invented initially by Ovum’s Tony Baer as a way to represent the collection of ‘high velocity’ solutions with respect to the big data. For Oracle, the Fast Data campaign in FY13 began as a way to tie a broader set of solutions together (SOA/Business Process Management, Data Integration and Business Analytics) under a set of use cases focused on real-time, high velocity data. It has helped to give Oracle a leap-frog advantage over many of the niche integration vendors (i.e. Informatica, Pega, Tibco, Software AG, Terracotta) who haven’t been able to address these types of end-to-end use cases which rely on the combination of filtering, in-memory data processing, correlation, real-time data movement and transformation, end-to-end analytics, and business process management. Only Oracle can address all the dimensions of fast data, and only Oracle can provide a set of engineered solutions to address this space. This event is designed to continue that thought leadership momentum and raise the awareness about what Oracle Fast Data solutions are designed to solve. It’s designed to highlight real customer solutions and articulate the business benefits that fast data can address. This is not an event that gets into the esoteric technical standards of Hadoop, NoSQL, and in-memory data grids. This is an event that instead gets into the heart of business problems that big data has left un-addressed and charts the path for next steps in fast data. Get the Fast Data Executive Round Table FY14 event kit here. Support marketing campaigns We can support such events by: Oracle speakers - contact your partner manager Marketing budget - contact your A&C marketing manager Event location - free use of Oracle Customer Visitor Centers conference rooms Promote your event at events.oracle.com: http://tinyurl.com/eventspecialized E-Blast: invite customers to your event – contact your A&C marketing manager For additional marketing kits e.g for Business Process Managementplease visit our SOA Community Workspace. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags:

    Read the article

  • Wireless connection by using command screen

    - by Amadeus
    I installed Ubuntu 12.04 armhf to my beagleboard-xm and now trying to connect to a wireless network. First, I checked if I can search for available networks: ubuntu@arm:~$ iwlist scan lo Interface doesn't support scanning. usb0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: EA:7D:EF:60:C9:0B Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-23 dBm Encryption key:on ESSID:"ghostrider" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Ad-Hoc Extra:tsf=000000005a1ab50e Extra: Last beacon: 6242ms ago IE: Unknown: 000A67686F73747269646572 IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 06020000 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: Unknown: 32040C121860 IE: Unknown: 2D1A2C181BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D16010800000000FF000000000000000000000000000000 IE: Unknown: DD09001018020000000000 Then I edited /etc/network/interfaces file to the following: root@arm:/etc/wpa_supplicant# cat /etc/network/interfaces auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # Example to keep MAC address between reboots #hwaddress ether DE:AD:BE:EF:CA:FE # WiFi Example auto wlan0 iface wlan0 inet dhcp wpa-ssid "ghostrider" wpa-psk "b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf" But I cannot still connect to the wireless network: root@arm:/etc/wpa_supplicant# iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Asociated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on eth0 no wireless extensions. root@arm:/etc/network# ifup wlan0 Failed to bring up wlan0. What is wrong? Should I change any other files also? But I think it was enough. By the way if you are curious about where that wpa-psk came from: zero@ghostrider:~$ wpa_passphrase ghostrider 34bddf67c2 network={ ssid="ghostrider" #psk="34bddf67c2" psk=b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf } I will appreciate any effort to help. Regards, Amadeus ps: Also I tried to connect manually: root@arm:/etc/network# iwconfig wlan0 essid ghostrider key s:34bddf67c2 But this did not solve my problem also.

    Read the article

< Previous Page | 465 466 467 468 469 470 471 472 473 474 475 476  | Next Page >