Search Results

Search found 15129 results on 606 pages for 'orientation changes'.

Page 471/606 | < Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >

• Issues with returned mail sent to web-based email domains

  - by Beeder

  My company is having issues with returned mail that we send out to external domains. A few weeks ago we replaced a firewall and changed ISP providers and began subsequently having issues RECEIVING emails from external sources because we hadn't updated our new IPs in the DNS records. After making the necessary configuration changes and setting up SMTP forwarding over port 25 to our mail server, everything was working fine up until a few days ago when we started having mail sent out returned to us. We aren't having any trouble communicating internally (to recipients on our domain) but it seems we're having trouble with outbound messages to web-based email recipients. (@hotmail, @live, @yahoo, @gmail...etc) Currently we are running Server 2003 SP2 and exchange 2003. I'm very unfamiliar with configuring Exchange and could really use some help in narrowing down the possibilities. I did some research and am becoming suspicious of Sender ID being the culprit due to our recent IP address change and the likelihood that Sender ID is identifying us as a fake domain. Am I going in entirely the wrong direction? Any input or guidance would be infinitely appreciated. This is the message that is returned when an outbound message fails...this particular one was sent to my @live.com account for testing purposes... Your message did not reach some or all of the intended recipients. The following recipient(s) could not be reached: [email protected] on 5/17/2012 3:02 PM There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. Unfortunately, messages from xx.x.xx.x weren't sent. Please contact your Internet service provider since part of their network is on our block list. I tried a reverse DNS lookup and found that we are set up as a Forward-confirmed reverse DNS. So do I just need to contact my ISP and have them correct their DNS records or is this something I can solve on our end??

  Read the article

• Can only ssh when not using wifi

  - by AChrapko

  So I have 3 machines, a windows 7 desktop that is always wired to my router, osX laptop, and raspberry pi running debian linux. My router is a Linksys e1000 wireless N. My goal is to be able to ssh the raspi from any machine, while it is connected via wifi. My problem is that when trying to ssh from either the win7 or osX to the Pi it either times out, or gives an error: "ssh: connect to host 192.168.1.### port 22: No route to host" The only times that I have managed to connect to the pi from any machine were when it connected to the router via an Ethernet cable. Currently with win7 desktop wired, macbook wireless, and pi wireless tests give the following: win7 ping macbook: Destination host unreachable. macbook ping win7: Request timeout. win7 ping pi: Destination host unreachable. macbook ping pi: Request timeout. blah blah blah Plugging the macbook into the router with an Ethernet cable all communication between win7 and macbook works. Pings, ssh, ftp, smb ect... No changes to the pi, still no connections possible to or from any of the other 2 machines. Note All machines, are able to connect to the internet and ssh to the same machine on a completely different network, wired or over wifi. Plugging the Pi in with Ethernet (and macbook still wired) I can ssh to the pi from both win7 and macbook. I can ssh from the pi to macbook. All machines still able to connect the the off network machine. Also another little side note- I was playing warcraft 3 with my roommates the other day, and the only time they were able to see my LAN game was when they were plugged into the router with an Ethernet cable. Once or twice one of the laptops was able to connect over wifi, but not without another computer connecting first via Ethernet. So basically does anyone have any info as to why my router seems to completely ignore local wireless traffic?

  Read the article

• Computer will not boot - disk read error - cannot boot from HD or DVD

  - by Grant Palin

  This is a 3 year-old system: HP a1640n. There have been no issues with it in the past. I added a video card 2 years ago, and more memory 1 year ago, both without issues. There haven't been any recent hardware changes. I did install Win7 in Oct., but there were no issues with that either. I used the computer fine two nights ago, and turned it off. Yesterday, I tried to turn it on, and got the error: "A Disk Read Error Occurred. Press CTRL ALT DEL to restart" So I restart, see the initial start screen (HP) and enter the BIOS. The hard drive and dvd drive appear to be listed, but the names are gibberish text. I tried putting a Windows disk in the dvd drive, and continued with the boot, but the disk did not get recognized. Even though the BIOS was set to check for optical media before the hard drive. Back to the error screen. If the computer would boot from a cd or dvd, I would just figure the hard drive needed replacing. But both being problematic worries me. Is this a matter of replacing both the hard drive and dvd drive, or might it be an indication of a bigger problem? Thanks for any advice.

  Read the article

• IIS no longer saving session variables

  - by John

  I'm running IIS v7 on a Win7 development machine. I have PHP code that saves session variables and calls them back later. This has been working on this machine for some time. For some reason now, the session variables dissapear immediatly after saving. Code that used to work fine on http://localhost/, suddenly now does not. I have tested different browsers - the vars dissapear regardless of browser. I have tested identical code on different servers. The problem exists only on this development machine. I tried some code that saves a session var, then reads it back and displays it, then shows a link to click on to read it back and display again. What happens is the session var DOES get written and read back and displayed ok. But when you click the link to view it again, it's gone. I don't recall making any changes to IIS. But I did run several malware scanners and clean-up tools. Is anyone aware of any setting in IIS that disallows session vars? Any other throughts?

  Read the article

• Backing up 80G hard drive 1G per day

  - by barrycarter

  I want to securely backup my 80G HD, but doing a complete backup takes forever and slows down my machine, so I want to backup just 1G per day. Details: % First hurdle: on the first day, I want to backup the "first" 1G of the hard drive. Of course, there really is no "first" 1G on a hard drive. % After 80 days, I'll have my whole HD backed up... assuming none of my files ever change, which of course they do. So the backup plan/program must also catch file creation/changes as they come along. % The backups must be consistent, in that I can restore my system by restoring the backups sequentially. In other words, "dd if=/harddrive" probably won't work. % The backups should encrypt file contents AND names, but I don't see this as a major hurdle. % Once the backup has backed up everything (even changed files), it can re-backup the first 1G on my hard drive. Even though this backup is redundant, that's OK, because I always want to be backing up something (eg, if I'm backing up to optical media, the older media might start going corrupt). Is there a magic backup plan/program that does this? In reality, I want to do this for multiple machines with multiple drives each, but think that solving the above will solve the general case.

  Read the article

• Ubuntu server 10.04 disconnects after short periods of inactivity on my site

  - by user57019

  I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

  Read the article

• Windows 8 Communication Sound Setting not working

  - by blackmastiff

  I've been having a problem on my new laptop recently which is familiar but baffling the usual fixes. I'm running Windows 8 with an onboard Realtek soundcard. It's similar to the one on my older computer running Windows 7. The problem is, when I'm in Skype or Mumble, Windows changes the sound output to lower everything else automatically. I've disabled the communications sound change option on the communications tab within sound devices and checked all the applications settings to insure that they are not responsible. They aren't, and I noticed something else. When I'm in the sound properties dialog, and I switch to the microphone tab, the same audio output reduction occurs. This seems to say to me that the microphone must be responsible in some way, but seeing as I uninstalled all the drivers and installed windows drivers instead, I'm confused as to why this would be occurring. Any thoughts? EDIT: I just tried disabling the built in microphone and the sound no longer get changed. More confused now? As soon as I turn it back on, the sound gets dropped again. Incidentally, the fix for this on windows 7 was this question: Windows 7 lowers applications' volume automatically I've got my computer set that way and it doesn't work.

  Read the article

• How do I prevent lighttpd from caching static files, even when modified on disk?

  - by Pixelastic

  I am using lighttpd to serve static files. I have a bunch of images in a dir that I regularly update. This will change the file content (and filesize) as well as the modification date, but not their filename. When I access the files through http, the updates are not taken into account and lighty serves the old file. I can manually rename the file to something different, then lighttpd will return a 404 error, and if I rename my file back, I will get the correct updated version. Seems like lightty is using some kind of cache mechanism of its own (which is fine) to return static files. Unfortunatly, it seems that this mechanism doesn't update itself when files are modified. I checked through Wireshark, and my browser is really doing a request to the file, this is not a browser caching issue. It returns a 200 OK when requesting it from an empty cache, and a 304 Not Modified otherwise, as expected. But the file is returned with a wrong Last-Modified header that do not reflect the real last modification date. Maybe there is some config directive that I am not aware of ? I would like the files returned by lighty to reflect the changes made on disk directly, or at least being able to invalidate its cache.

  Read the article

• How to divert traffic based on hostname using HAProxy?

  - by Bosky

  I've had some initial success with HAProxy setting up a bunch of app servers listening on various other ports. I now have another webserver listening on one port, and i'd like to what changes to make to my config to flow traffic by hostname as well. The following is the current setup, assuming: my apache webserver is running at examplecom:8001 my bunch of app servers 0.0.0.0:8081, 0.0.0.0:8082 , 0.0.0.0:8083 global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 4096 debug #quiet #user haproxy #group haproxy defaults log global mode http option httplog option dontlognull retries 3 redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 listen appservers 0.0.0.0:80 mode http balance roundrobin option httpclose option forwardfor #option httpchk HEAD /check.txt HTTP/1.0 server inst1 0.0.0.0:8081 cookie server01 check inter 2000 fall 3 server inst2 0.0.0.0:8082 cookie server02 check inter 2000 fall 3 server inst3 0.0.0.0:8083 cookie server01 check inter 2000 fall 3 server inst4 0.0.0.0:8084 cookie server02 check inter 2000 fall 3 capture cookie vgnvisitor= len 32 (any other comments on the ^ setup are welcome.) Now I'd like to continue the same above, but in addition in case - if the hostname is myspecialtopleveldomain<dot>com, then would like to flow traffic to example<dot>com:8001 ~B

  Read the article

• Is it possible to add a WiFi HotSpot to an already established LAN, keep the two separate, and not modify the primary router?

  - by user12844

  I have a set up where my Cisco ASA is sitting in one facility, providing access to the Internet for two buildings. The two buildings are geographically separated by a Wireless Bridge spanning about 10 miles. All computers and equipment inside the LAN are on the same subnet (its pretty small) and we have WiFi AP's in both locations providing Wired and Wireless access to the LAN. Given all the BYOD (Ipods, and SmartPhones etc...) coming into the office as well as Visiting reps etc... we would like to also provide a non-secure, device independent (the devices cannot see or communicate with each other), and LAN independent (the devices cannot see or use anything on the LAN) HotSpot that anyone could use for their Devices that gives them access to the Internet ONLY without needing a password. I get that this could be possible at the facility with my Cisco if I messed with it and created VLANs etc... but then I would need to get it across my Bridge as well and don't think that would be possible without serious reconfiguration of everything. Would really like some kind of magic drop in solution that can kind of piggy back on my LAN without really needing to do very many if any changes to the current set up.

  Read the article

• No access to Windows 2003 admin shares

  - by ARomo

  This is the environment: Several Win 2003 SP 2 servers and several Win XP SP2 & SP3 clients. All in the same LAN. Firewall is disabled everywhere. No recent Windows updates or configuration changes. This is the problem: Since last Thursday, I log on to any other server or workstation as any regular (non-admin) user and I fail to be able to open ADMIN SHARES ONLY (namely \\server1\c$, \\server1\e$ and \\server1\admin$). The error message is: "\server1\c$ is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again." I can, however, open the same shares if I use FQDN or IP address: \\server1.domain.local\c$ \\172.0.0.1\c$ Other shares do not have this issue and I can open them without any issue. Any ideas or suggestion would be truly appreciated. Thank you in advance.

  Read the article

• How to fix missing RAID1 drive

  - by Sodved

  I had to do some fiddling about with my cables inside thebox and now I am getting a "Critical Error" about the RAID disks during startup. I have a gigabyte GA-MA770T-UD3 motherboard. Aparently the RAID controller is an AMD SB710 chip. I'm pretty sure I know what happenned. The first time I rebooted I had forgotten the power cable on one of the disks in the RAID1 (mirror) and let it boot up. So I shut down and put the power back in. So now when it boots up I go into the RAID admin interface (between the BIOS screen and the OS loading): it shows the RAID1 as in error the logical device has one disk and says the other is disconnected or missing the other physical disk shows up as a single disk If I boot to the OS (Windows 7 32 bit) the data all seems to be there. If I go into computer management it says my partition is on a disk and working OK. But the other disk is offline because: "The disk is offline because it has a signature collision with another disk that is online" So I am guessing because I STUPIDLY booted up with only one of the disks powered on, the other disk fell out of synch with the mirror and so now cannot rejoin the mirror. How do I fix this? I want to get the RAID1 mirror working again. There does not appear to be any "Repair" option in the basic RAID admin tool which I get into during startup before the OS boots. I have not made any explicit changes to the online one (but I guess the OS has probably written some admin data).

  Read the article

• Server periodically freezing - Help Stabilizing

  - by JonDog

  We run an asp.net/sql server data collection website with a hand full of clients dumping data in and running reports. We moved to a new server (specs below) and have had issues with it freezing and having to reboot it a dozen times over the pass six months. The hosting company has mentioned possible causes (listed below) but cant give a definite answer on what is going wrong. They have offered to reconfigure how ever I like. We have benefited from having a much faster system and really dont want to get rid of the ssd's unless they are the issue. Two possible setup changes that I've talked with them about are also listed below. Any suggestions on what maybe causing the freezing issue as well as suggestion on a new setup would be great. My main questions are: Do SSD generally have problems running the OS & SQL Server on the same RAID Array? and Are the new SSD's still unrefined enough to be running in a production environment? Thanks Current: Xeon Quad Core E3-1270 3.40 Ghz 16 GB DDR3-1333 ECC SDRAM First Hard Drive: 120GB Intel SSD Second Hard Drive: 120GB Intel SSD Third Hard Drive: 120GB Intel SSD Fourth Hard Drive: 120GB Intel SSD SAS 4 Port RAID Card Windows 2012 Standard Edition - 64 Bit MSSQL 2008 Web Edition Possible Causes: Running Sql Server & OS on same RAID Array OS Software Issues Using SSD's CPU Underpowered Not enough RAM Option 1 2x Xeon Quad Core E5-2603 1.80 GHz 16 GB DDR3-1333 ECC SDRAM 1 x 240GB Intel SSD - OS 3 x 1 TB SATA HDD (7200 RPM) - SQL Server SATA 4 Port RAID Card Windows 2012 Standard Edition - 64 Bit Option 2 Dell PowerEdge E3-1270v2 3.5GHz 4 Cores 16 GB DDR3-1600 UDIMM 4 x 128 GB Samsung 840 Pro SSD Add-in H200 (SAS/SATA Controller), 4 Hard Drives - RAID 10 Windows 2012 Standard Edition - 64 Bit

  Read the article

• How and where do you manage your domain names?

  - by Saif Bechan

  In the past several years doing web development I often times needed to buy new domain names. I changed registrars a lot also so over the years I have multiple domain names scattered over different registrars all over the world. Now I want to bring a little structure into my business, and I am at the point that I want to be able to have easy control over my domain names in a convenient way. Does anyone have an idea on what the best way is to give structure on this. I have made some suggestions maybe you can comment on them for me. 1) Just leave it as it is I can leave everything as it is. To make adjustments I have to log into different panels, and for some registrars I have to email the changes. 2) Transfer all the domains to one registar This will cost a lot, about 10 usd per domain name. But if I can find a registar where I have full control over DNS this is worth looking at. Can you give me some comments on how you are doing things now. Maybe also which registrar you prefer on doing things.

  Read the article

• How to fix "The connection was restarted"?

  - by Altar

  I have a php script with ajax. Few days ago, without making any changes, the script stopped working. The script is working sometimes but it is very slow. Other times it doesn't load completely. Yet other times it loads and empty page or it shows a "The connection was restarted" message. We have tried loading the page from 4 different computers in two different countries (two different ISPs). There is nothing relevant in the server's log. We contacted iPage.com hosting support. We sent screenshots. And all we manage to get from them was an incomplete screenshot and the message 'We tested. The page loads'. So, they won't admit the fault. It looks like they loaded the page once and declared it is working and went back to playing solitaire. I know their support. We had all kind of problems with iPage hosting. My questions are: 1. There is any way to make this error more easy to reproduce? I mean instead of fixing the error to get it appear more often. 2. There is any way to test a server response, to see if it drops connections?

  Read the article

• How do I back up Hyper-V VMs with Windows Server backup on Windows Server 2008 R2?

  - by Chris

  I've searched this site and google, and I CAN find information about how to back up Hyper-V virtual machines by using Windows Server Backup from the Hyper-V host in Windows Server 2008. You have to set up a registry key to enable the Hyper-V VSS writer, and then you can take online backups of your VMs. However, all the information I have found is about a year old, and none of it has been updated for Windows Server 2008 R2. I tried to run the "FixIt" .msi found here: http://support.microsoft.com/kb/958662 ... but it said that it was not applicable to my operating system. So I am thinking either Windows Server 2008 R2 already has its VSS service for Hyper-V enabled, or it still needs to be enabled but the FixIt package doesn't feel comfortable operating on an OS that wasn't RTM at the time. I went ahead and scheduled a windows server backup for 9pm tomorrow. It said it would take 86 GB, which means it MUST be counting those VMs. But will this backup fail? Can anyone confirm whether you have to apply the same registry changes for R2?

  Read the article

• can't change wallpaper real time regedit commands

  - by itagomo

  i'm a first time 'SuperUser' poster .. what i want is to programatically change Desktop Wallpaper every few hours .. i'm using a batch file (.bat) and don't want to use other languages or programs, just the pre-installed stuffs with Windows XP .. i've already made my script that will modify values in the Registry reg add "HKCU\Control Panel\Desktop" /v Wallpaper /d "C:\Pictures\picture1.jpg" but it's not taking effect real time even with this command: RUNDLL32.EXE USER32.DLL,UpdatePerUserSystemParameters ,1 ,True need to reboot first to take effect. if i'm going to use Display Properties, it'll show at once. what i've noticed is that changes will take effect real time if it's a .bmp file and not for .jpg images. Second option is to convert JPG to 24-bit BMP files (to look exactly the same, but will triple the file size), but i'm hoping a better way .. i've already googled things but no avail.. i hope you (the helpful reader) can post any .bat or even vbs script to change Desktop Wallpaper instantly with JPG pictures .. hoping there's an answer without installing other apps or scripts ..

  Read the article

• Determine which user initiated call in Asterisk

  - by adaptive

  I had the following code in my extensions.conf file: [local] exten => _NXXNXXXXXX,1,Set(CALLERID(name)=${OUTGOING_NAME}) exten => _NXXNXXXXXX,n,Set(CALLERID(num)=${OUTGOING_NUMBER}) Now I want to change this code to set the CallerID and number based on the user/extension that is making the call. In fact I have four(4) users/extensions in my sip.conf and only one of them (the one I use for business) is supposed to send a different caller id/number. Everything is in the same context (for simplicity) since all lines need to be able to pick up an incoming call. The only difference is when line1 needs to make a call, it has to send a different caller id/number and use a different provider. This is what I have so far: [local] exten => _NXXNXXXXXX,1,Set(line=${SIP_HEADER(From)}) exten => _NXXNXXXXXX,n,Verbose(line variable is <${line}>) exten => _NXXNXXXXXX,n,Set(CALLERID(name)=${IF($[ ${line} = line1 ]?${COMPANY_NAME}:${FAMILY_NAME})}) exten => _NXXNXXXXXX,n,Set(CALLERID(num)=${IF($[ ${line} = line1 ]?${COMPANY_NUMBER}:${FAMILY_NUMBER})}) exten => _NXXNXXXXXX,n,Dial(${IF($[ ${line} = line1]?SIP/${EXTEN}@${COMPANY_PROVIDER}:SIP/${EXTEN}@${FAMILY_PROVIDER})}) I really don't know if this is correct and I'm afraid to commit these changes to my extensions.conf before validating. Any help will be greatly appreciated.

  Read the article

• Can't get 1440x900 resolution with GRUB2 although vbeinfo says it's available

  - by TomSW

  I'm trying to use GRUB2 in graphical mode with 1440x900 resolution, but the result is always garbled nonsense: the highest resolution I can get is 1280x800. Word is from googling that long as vbeinfo lists a resolution, GRUB2 can use it. This doesn't seem to be true: vbeinfo says that 1440x900 is available but it doesn't work. Testing it from the GRUB2 command line: set gxfmode=1440x900 terminal_output gfxterm # -> garbled nonsense # back to trusty 640x480 terminal_output console The graphics card is an Intel GM965. Once linux boots the framebuffer switches to 1440x900. Added after epheminent's reply and various experiments vbeinfo lists two sets of modes. The first set runs from 0x160 to 0x16b, with resolutions 768x480, 960x600, 1280x800 and 1440x900 Then - after a bunch of text-only modes - the second set, containing resolutions 1024x768, 800x600, and 640x480 The first set of modes aren't altered by 915resolution. They all work except 1440x900. The resolution of modes in the second set can be altered using the 915resolution module / command available in GRUB2 = 1.99. # in /boot/grub/grub.cfg insmod 915resolution # 30, 32, 34 all work for me: all that varies is which modes are altered 915resolution 30 1440 900 # setting an impossible resolution changes the mode to "text-only" # in my case 1280x1024 is not supported 915resolution 30 1280 1024 Clearly, 1440x900 should just work: adding it with 915resolution is just a workaround.

  Read the article

• CentOS: AJAX/jQuery not working

  - by Australiya

  In a nutshell, I have an unmanaged VPS. At one time, it had Ubuntu 10.10 server on it, then I reinstalled it with CentOS 6 and updated it to CentOS 6.2. Now, the problem is, the AJAX/jQuery shoutbox has ceased working (I assume it uses one of the two to inject itself into a div and then refresh when new messages are posted, I'm not sure, I didn't write these), and the plug-board script now shows me a lime green blank page. No changes to the source codes have been made, and they are in the location they expect themselves to be. I have Apache2, MySQL 5, PHP 5, and I did install the php-xml libraries. What am I missing? It's gotta be server side because the scripts themselves are fine, if I move them to a different server they work just fine. I'm not getting any errors related to this in the error_log file. Thanks in advance! Edit: If you want, you can look at the plugboard at kazeshini.net/plugboard and there's an installation of the chatbox at silverlotus.kazeshini.net/yshout/example, I know nothing about scripts and debugging so better someone else looks at it than someone that doesn't know what they're looking for.

  Read the article

• Understanding MySQL Query Caches and when to implement it?

  - by Jeff

  On our current MySQL server query cache is enabled. Qchache_hits: 31913 Qchache_inserts: 50959 Qchache_lowmem_prunes: 9320 Qchache_not_chached: 209320 Qchache_queries_in_chace: 986 com_update: 0 com_delete: 0 I do not fully understand the Query cache - I am reading about it currently and trying to understand it. Our database holds inventory data, customer data, employee data, sales data and so forth. The query is very rarely run more than once. The possibility of a query being run twice is viewing a specific sales information twice. But basically everything in our system changes constantly. It is always being updated, deleted, insterted and off the top of my head I can't picture users running the same query twice within a week. Do I even need to have the query cache enabled? I am guessing that the inserts means 51k entries have been added, but only 986 of those are being stored? Would an idea be to refresh the cache, and watch it for a week and check how many of the queries in cached are accessed maybe on a weekly basis to see if it is actually returning any benefits? Any help/guidance on this is appreciated, thanks

  Read the article

• Script apparently changing file permissions on Mac OS to 000

  - by half_bit

  I wrote a little shellscript that helps installing a web application. The script itself just downloads a zip archive, extracts it and changes the permissions of the extracted files to the one needed to run the webapp. The problem now is that some users reported that after running my script, all the permissions of every file in their home directory or even on their whole computer changed to 000 (except the actual unzipped files which do have the correct permissions). The only lines in my script actually doing IO are these: URL="http://foo.com/" FILENAME="some.zip" curl --silent "$URL$FILENAME" -o $FILENAME > /dev/null echo "Unzipping...\c" if unzip -oqq $FILENAME > /dev/null then chmod -R 777 app/tmp app/webroot app/Config/database* app/configuration* chown -R www:www * rm $FILENAME echo "\t\t\tOK" exit 0 else echo "\t\t\tERROR" exit 1 fi I seriously can't explain this to myself. How can this even be possible? It is entirely possible that the users accidentally ran the script in their home directory, but that still wouldn't explain why the permissions where set to 000, not www/777.

  Read the article

• How to keep multiple servers in sync file wise?

  - by GForceSys

  I'm currently managing a cluster of PHP-FPM servers, all of which tend to get out of sync with each other. The application that I'm using on top of the app servers (Magento) allows for admins to modify various files on the system, but now that the site is in a clustered set up modifying a file only modifies it on a single instance (on one of the app servers) of the various machines in the cluster. Is there an open-source application for Linux that may allow me to keep all of these servers in sync? I have no problem with creating a small VM instance that can listen for changes from machines to sync. In theory, the perfect application would have small clients that run on each machine to be synced, which would talk to the master server which would then decide how/what to sync from each machine. I have already examined the possibilities of running a centralized file server, but unfortunately my app servers are spread out between EC2 and physical machines, which makes this unfeasible. As there are multiple app servers (some of which are dynamically created depending on the load of the site), simply setting up a rsync cron job is not efficient as the cron job would have to be modified on each machine to send files to every other machine in the cluster, and that would just be a whole bunch of unnecessary data transfers/ssh connections.

  Read the article

• Profile not loaded correctly (Cannot access registry)

  - by xaav

  Every so often, I log on and get the Following Message: User profile was not loaded correctly. You have been logged on with a temporary profile. Changes you make to this profile will be lost when you log off. Please see the event log for details or contact your administrator This almost always happens when somebody else has been on the computer for a while, and then I log on. This never used to happen, but now it happens pretty often. My profile is not permanently corrupted, all I have to do is restart my computer, but this annoys me, and I would like to fix it. I was curios about the reason of this cause, so I looked into the Event Log, and found the root of the problem was the ntuser.dat file in the profile that I was logging on to was locked at logon time. This resulted in the current users registry not being loaded, resulting in failure to load the profile. I just found a microsoft article that mentions this exact issue: http://support.microsoft.com/kb/960464/ The problem is that I do not want to delete this profile; and this issue does not come up every time that I log on, only when somebody else has been on a long time before me. What could be locking this file? Is there any way to get a process list without logging on so that I can identify which process has the file locked? Any other suggestions?

  Read the article

• Two mouse, one left handed and another right handed. At the same time

  - by trailmax

  I would like to have two mouse connected to my computer, and have one mouse left-handed, another right-handed. And not needing to change any settings for using any of them. I've googled for this and did not find some information, but nothing helpful. Somebody suggested to have 2 accounts, some other suggested a short-cut that changes mouse buttons over. I did not like any of that. And I remember, I saw somebody using their laptop with right-handed touch-pad and left-handed mouse. At the same time. Both of my mouse are plain vanilla USB, with no drivers, tried finding drivers for any of the mouse did not get me anywhere. This is how mouse configuration looks like: There is no option for different mouse to be configured different. I think I need to install some mouse drivers/software that allow different configuration. Is there anything like this availble?? Many thanks in advance! p.s. Using Windows 7 Pro, one mouse is Fujitsu, another Sandsrom.

  Read the article

< Previous Page | 467 468 469 470 471 472 473 474 475 476 477 478  | Next Page >