Search Results

Search found 14544 results on 582 pages for 'ssh config'.

Page 472/582 | < Previous Page | 468 469 470 471 472 473 474 475 476 477 478 479  | Next Page >

• How do I configure nVidia drivers on a Portable Ubuntu setup?

  - by Nicholas Flynt

  I've been pulling my hair out over this one for a couple of days now, google is no help. I've created a wonderful (until this issue) portable copy of Ubuntu linux that will boot on mostly anything by using a USB enclosure for my laptop's 80GB SATA drive. So far so good, it boots and runs on everything, and on non-nVidia card setups was even detecting the drivers, or letting me install the required drivers for hardware acceleration and compiz. Because you know, the wobble windows are the most awesome thing ever. Anyway, my desktop machine had an nVidia card, so I'm thinking, sure, I'll just install the nVidia drivers like before and everything will work happily. Not so-- now the desktop and any other nVidia cards work great, but it seems to have completely disabled any other graphics cards. When the kernel module detects that an nVidia card isn't present, it shoots up this nasty little dialog box giving me the option to boot into "low graphics" mode, which doesn't even allow me to use the correct screen resolution, much less see the installed graphics card and try to configure a driver for it. Is there any way to configure Ubuntu (with the dreaded nVidia kernel module) so that it can use nVidia's drivers when an nVidia card is present, and default to the normal (not low-graphics) setup in other cases, so that it has a fair chance of using what's actually present? I'm not afraid to much with config files, I just don't know the underlying system well enough to feel comfortable diving in without a push in the right direction. Thanks guys!

  Read the article

• Forward Apache to Django dev server

  - by Alex Jillard

  I'm trying to get apache to forward all requests on port 80 to 127.0.0.1:8000, which is where the django dev server runs. I think I have it forwarding properly, but there must be an issue with 127.0.0.1:8000 not being run by apache? I'm running the django dev server in an ubuntu vmware instance, and I'd other people in the office to see the apps in development without having to promote anything to our actual dev/staging servers. Right now the virtual machine picks up an IP for itself, and when I point a browser to that url with the defualt apache config, I get the default apache page. I've since changed the httpd.conf file to the following to try and get it to forward the requests to the django dev server: ServerName localhost <Proxy *> Order deny,allow Allow from all </Proxy> <VirtualHost *> ServerName localhost ServerAdmin [email protected] ProxyRequests off ProxyPass * http://127.0.0.1:8000 </VirtualHost> All I get are 404s with this, and in error.log I get the following (192.168.1.101 is the IP of my computer 192.168.1.142 is the IP of the virtual machine): [Mon Mar 08 08:42:30 2010] [error] [client 192.168.1.101] File does not exist: /htdocs

  Read the article

• Eclipse: Slow startup time

  - by ct2k7

  Hello, I've got Eclipse 3.6.1 on my MacBook Air (2010), and I'm getting slowish startup times. Well, slow, compared to my Desktop, which is somewhat less powerful and a few years old). The startup generally takes 15 seconds, and of this, 4 is spent just on the Eclipse splash screen, before Eclipse loads anything. No projects are open at startup. Here's a copy of my eclipse.ini. -startup ../../../plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar --launcher.library ../../../plugins/org.eclipse.equinox.launcher.cocoa.macosx.x86_64_1.1.1.R36x_v20100810 -showsplash org.eclipse.platform --launcher.XXMaxPermSize 512m --launcher.defaultAction openFile -vmargs -Xms256m -Xmx512m -Xdock:icon=../Resources/Eclipse.icns -XstartOnFirstThread -Dorg.eclipse.swt.internal.carbon.smallFonts -Dosgi.requiredJavaVersion=1.6 -Xverify:none -XX:+UseConcMarkSweepGC -XX:+CMSClassUnloadingEnabled -XX:+CMSPermGenSweepingEnabled -XX:+UnlockExperimentalVMOptions -XX:+AggressiveOpts -XX:+StringCache -XX:+UseFastAccessorMethods -XX:+UseLargePages -XX:LargePageSizeInBytes=4m -XX:AllocatePrefetchLines=1 -XX:AllocatePrefetchStyle=1 -Dide.gc=true The problem doesn't seem to be related to plugins - I've disabled the ones which I don't need, and regardless of this configuration or whether all of them are selected on startup, it only takes 1second to load the plugins. I'm running Eclipse 3.6.1 Cocoa x64 build (vanilla) with the Zend Studio plugin. The machine has 4GB RAM, an SSD with over 64% free space, 1.6GHz (4MB L2 Cache). OS is Mac OS X 10.6.6, latest Java available, 1.6. For comparison, my Desktop, an old P4 3GHZ (512K L2 Cache) with a 7200RPM drive, under 40% free space, Eclipse (same config) loads in under 7 seconds, consistently. Note, this one is a Windows machine, with latest Java installed.

  Read the article

• How to enable error log in lighttpd properly?

  - by Tomaszs

  I have a Centos 5 system with Lighttpd and fastcgi enabled. It does log access but does not log errors. I have Internal Server Error 500 and no info in log and when I try to open not -existing file also - no info in error log. How to enable it properly? Below is list of modules that I've enabled: server.modules = ( "mod_rewrite", "mod_redirect", "mod_alias", # "mod_access", # "mod_cml", # "mod_trigger_b4_dl", # "mod_auth", "mod_status", "mod_setenv", "mod_fastcgi", # "mod_webdav", # "mod_proxy_core", # "mod_proxy_backend_fastcgi", # "mod_proxy_backend_scgi", # "mod_proxy_backend_ajp13", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) Here are setting of debugging: ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" debug.log-file-not-found = "enable" #debug.log-condition-handling = "enable" Setting of path to error and access log: ## where to send error-messages to server.errorlog = "/home/lxadmin/httpd/lighttpd/error.log" #### accesslog module accesslog.filename = "/home/lxadmin/httpd/lighttpd/ligh.log" Settings of fastcgi: fastcgi.debug = 1 fastcgi.server = ( ".php" => (( "bin-path" => "/usr/bin/php-cgi", "socket" => "/tmp/php.socket", "max-procs" => 12, "bin-environment" => ( "PHP_FCGI_CHILDREN" => "2", "PHP_FCGI_MAX_REQUESTS" => "500" ) ))) And in included config file I have: server.errorlog = "/home/httpd/mywebsite.com/stats/mywebsite.com-error_log" What comes to log files: /home/httpd/mywebsite.com/stats/ -rw-r--r-- 1 apache apache 5173239 May 16 11:34 mywebsite.com-custom_log -rwxrwxrwx 1 root root 0 Mar 27 2009 mywebsite.com-error_log /home/lxadmin/httpd/lighttpd/ -rwxrwxrwx 1 apache apache 2184 Apr 22 22:59 error.log -rwxrwxrwx 1 apache apache 6088621 May 16 11:26 ligh.log I gave error logs chmod 777 for a try to check if it's the issue, but apparently it's not. So my question is: what to do to have error log enabled?

  Read the article

• Coldfusion 9 losing connection to MySQL 5 database server a couple of weeks after the server is started

  - by user1503757

  We get the following Coldfusion error message after our server have been running for a couple of weeks: Error Executing Database Query.Could not create connection to database server. Attempted reconnect 3 times We run Coldfusion Enterprise 9 on a one year old XServer with Snow Leopard and MySQL 5 The server has about ten DSN set up in the Coldfusion Administrator All local, with default advanced settings, and host set to "localhost" The server is not under heavy load. The strange thing is that after a restart of the server, everything works fine. Then after a week or so, some databases will stop working, in the sense that Coldfusion cannot create a connection to them. If I then go to the Coldfusion Administrator and click "Verify all datasources", I will get that only 2 or 3 got verified, the other ones failed, and it is always the same datasources that can't be verified when the server starts to behave like this if I try to verify again, BUT NOT neccessary the same datasources that couldn't be verified the last time the server behaved like this. I know about the setting "max_connections" and we have included a line for that setting in the MySQL config file and set it to 2000, and when we read it by a query it says "2000", so that can't be the problem. Anyone?

  Read the article

• Office 365 - Outlook shows Global Address List clicking "Rooms" during a meeting request

  - by TheCleaner

  This appears to be a "known" issue, but apparently no fix for it. However, I've been impressed before at the tenacity of the experts here to figure out an answer/fix. ISSUE When booking a New Meeting in Outlook (2013 or 2010) and choosing the Rooms button: The default list that opens is the Offline Global Address List: Which means a user has to change from the Offline Global Address List to the All Rooms list as shown here in order to easily pick from the list of actual rooms/resources: This isn't the default however for On-Premise Exchange servers. They default "correctly" to the All Rooms list when you click the Rooms button in the meeting request. While the option of using the Room Finder is there and does work, users have to know to click the Room Finder choice and it doesn't fix the actual root issue here. MY RESEARCH A few links I've found: http://community.office365.com/en-us/forums/158/t/41013.aspx http://community.office365.com/en-us/forums/148/p/24139/113954.aspx http://community.office365.com/en-us/forums/172/t/58824.aspx It was suggested that it might be that the "msExchResourceAddressLists attribute has incorrect value set". I checked my config by running: Get-OrganizationConfig | Select-Object ResourceAddressLists and the output was what it should be: ResourceAddressLists -------------------- {\All Rooms} QUESTION Does anyone have a fix that will make the All Rooms list be the default list when clicking the Rooms button in Outlook when using Office 365 / Exchange Online?

  Read the article

• Can one really fry a monitor by setting the wrong HorizSync and VertRefresh?

  - by rumtscho

  I've encountered this problem on several different systems with several different monitors: a monitor functions perfectly under Windows. I install a Linux and the max resolution is at some impossibly low value, mostly 640x480, changing it in Xorg.conf doesn't work. The X.org log file then shows that the driver cannot determine the correct refresh rate for the monitor, so it ignores everything in Xorg.conf and just loads in some default minimalistic mode. Googling the problem leads to an easy solution: set the HorizSync and VertRefresh in Xorg.conf, and everything works. The problem seems to be a common one, and I've seen dozens of results recommending the solution. Each of them contains the warning that you should use the value ranges provided with the monitor. Because if you don't, and your video card sends a signal with the wrong refresh rate, this can damage your monitor. Of course, you don't have a user manual for your monitor any more. If you are lucky to find one on the attic or on the net, it doesn't contain any information about the supported refresh rate. So you just type in the value suggested in the solution description, which varies wildly depending on your source, and cross your fingers. You restart, and... ... you've set the wrong values. So the monitor shows a short message like "input signal out of range", and you do a hard restart, repair your Xorg.conf in recovery mode, and everything is fine, including your monitor. So does this warning reflect a real possibility, or is it just a geeky urban legend? Or is it something which used to happen in the past, before manufacturers started protecting the monitors against it? Is it technically possible with every monitor technology, or is it maybe something which can only happen to a CRT? If you think that it's true, why? Have you ever witnessed a monitor die from the wrong refresh config, or have you read of it in a reputable source?

  Read the article

• Basic Apache setup is not seeing my site

  - by Jakobud

  Sorry that is a horrible thread subject, but I cannot think of a better more descriptive subject. We are running a Fedora 11 server that is currently hosting some CRM on it. I want to use a VirtualHost directive to add another site to the server. So I created this conf: /etc/httpd/conf.d/mysite.ourdomain.com.conf And here is the content: <VirtualHost *:80> ServerName mysite.ourdomain.com DocumentRoot /www/mysite ServerAdmin [email protected] ErrorLog /var/log/mysite.ourdomain.com-error.log CustomLog /var/log/mysite.ourdomain.com-access.log common </VirtualHost> I restarted apache, getting the following warning: [warn] NameVirtualHost *:80 has no VirtualHosts From what I read, this warning is not related and I can ignore it and my site should still be up and running, correct? (I'll troubleshoot this error later if so) Well I have our DNS server setup to point mysite.ourdomain.com to goto this server. I can ping it and it points to the correct LAN IP, etc.. Now when I try to access it in the browswer I get nothing. It just says Connecting... and never gets there. If I try mysite.ourdomain.com or the IP address, neither one doesn't get there. It's a very simple and basic apache setup so I'm not sure what I'm doing wrong... Like I said, the other thing that is running on this server is a crm and it's .conf looks something like this: Listen x.x.x.x:443 <VirtualHost x.x.x.x:443> ServerAdmin [email protected] ServerName crm.ourdomain.com ErrorLog /var/log/httpd/ourdomain/crm-error.log CustomLog /var/log/httpd/ourdomain/crm-access.log common DocumentRoot /www/ourdomain/crm <IfModule mod_dir.c> DirectoryIndex /index.php </IfModule> </VirtualHost> There is also some LDAP authentication stuff in that config but I left it out cause I assumed it wasn't necessary to post. Anyone have any clue where I should start or what settings I can post from httpd.conf that would help?

  Read the article

• Active directory Kerberos OSX problems

  - by Temotodochi

  I'll try to keep this short, but informative. I'm currently unable to bind OSX lion (10.7.4) machines to our AD. OSX kerberos (heimdal) is unable to locate the KDC service. However i can bind linux & windows machines to the AD without any problems in the same network AD controls the domain DNS and all the relevant _kerberos._tcp.x.domain.com and _kpasswd SRV DNS records are there and resolve fine when tried from OSX machines. Defined ports are open for service and manually accessible from OSX. When i try kinit in the OSX, i can get the first auth through (wrong passwords fail instantly), but when supplied with correct password, kinit fails after some waiting with "unable to reach KDC". All machines run NTP and have correct time. During testing, network is not firewalled between the machines Linux and windows machines have no problems whatsoever I have tried with and without /etc/krb5.conf - OSX by default does not need it in the krb5.conf i used a working config from one of our linux machines. dsconfigad fails with simple "connection failed to the directory server" I'm a bit baffled with this. OSX is like the KDC is nowhere to be found and at the same time my test machines with windows 7 and some linux (centos 6 & debian 6) machines have no problems whatsoever. Same network, same configurations. I'm missing some vital piece of configuration somewhere, and i can't find out what it is.

  Read the article

• Invalid Parameter on node puppet

  - by chandank

  I am getting an error of err: Could not retrieve catalog from remote server: Error 400 on SERVER: Invalid parameter port at /etc/puppet/manifests/nodes/node.pp:652 on node test-puppet My puppet class: (The Line 652 at node.pp) node 'test-puppet' { class { 'syslog_ng': host => "newhost", ip => "192.168.1.10", port => "1999", logfile => "/var/log/test.log", } } On the module side class syslog_ng::config ( $host , $ip , $port, $logfile){ file {'/etc/syslog-ng/syslog-ng.conf': ensure => present, owner => 'root', group => 'root', content => template('syslog-ng/syslog-ng.conf.erb'), notify => Service['syslog-ng'], require => Class['syslog_ng::install'], } file {"/etc/syslog-ng/conf/${host}.conf": ensure => present, owner => 'root', group => 'root', notify => Service['syslog-ng'], content => template("syslog-ng/${host}.conf.erb"), require => Class['syslog_ng::install'], } } I think I am doing it as per the puppet documentation.

  Read the article

• Set default tab url in firefox 14

  - by sebster

  In the latest firefox update, new tabs show -instead of the previously default blank page- a window of recently viewed pages. Before this was available, I had installed an 'addon' to allow this (called 'fvd speed dial'). It worked fine however I have since delete.d this as it is no longer needed but still loads the page where the addon was housed:'chrome://fvd.speeddial/content/fvd_about_blank.html'. I have reinstalled firefox yet the same problem still occurs. On the 'about:config' page I have found the setting 'browser.newtab.url' but do not know the default url. Is there any way to remedy this? I will just add, I appologise if this is not the case with the new tab feature. It is all I have gathered from the firefox update page. Also, I do not want to, ideally, simply restore my settings as I have changed some of them (such as the search bar, that work fine. I am on windows-xp, home edition. Not sure of what service pack.

  Read the article

• Disable IPv6 on Debian VPS (Virtuozzo!)

  - by chris_l

  I have a Debian Lenny VPS, that's running virtualized by Parallels/Virtuozzo. Currently, the network interface doesn't have an IPv6 address - and that's good, because I don't have an ip6tables configuration. But I assume, that I could wake up one day, and ifconfig will show me an ipv6 address for the interface - because I have no control over the kernel or its modules - they're under the control of the hosting company. That would leave the server completely vulnerable to attacks from IPv6 addresses. What would be the best way to disable IPv6 (for the interface or maybe for the entire host)? Usually I would simply disable the kernel module, but that's not possible in this case. Update Maybe I should add, that I can use iptables and everything normally (I'm root on the VPS), but I can't make changes to the kernel or load kernel modules because of the way Virtuozzo works (shared kernel). lsmod always returns nothing. I can't call ip6tables -L (it says that I need to insmod, or that the kernel would have to be upgraded). I don't think, that changes to /etc/modprobe.d/aliases would have any effect, or do they? Networking Config? I thought, that maybe I can turn IPv6 off from /etc/network/... Is that possible? I just see, that they've set up avahi, so I should probably change the setting use-ipv6=yes to "no" in /etc/avahi/avahi.conf (?) Has anybody already tried this solution, and can I rely on it? I don't know too much about avahi. Would it actually have any effect? Or could it even bring my entire interface down, once IPv6 is enabled by the kernel?

  Read the article

• Asterisk, IAXModem & Hylafax how-tos?

  - by Brian Postow

  I'm trying to set up Asterisk and IAXModem to send faxes via T38 (Yes, I know I'm swatting a fly with a Buick...) However, since I'm trying to do something so small with a product so large, I'm having trouble finding samples or how-tos that show me how to set this up. I've got all three installed, and I THINK I have my IAXModem config correct. I'm pretty sure that I have Hylafax correct (I've used it with T38Modem) so, I need to know which of the Asterisk samples I need to use, and how to use them. I think I want to use some combination of iax.conf, iaxprov.conf, sip.conf and sip_notify.conf. But I'm not sure where to put them, or what to change... I'm sure that the answer is RTFM, but I'm not sure WHICH M, or where in it to R... thanks. EDIT On a mailing list, someone told me that this actually WON'T WORK because IAX doesn't do T38. So, is there some other way to get Asterisk to work with Hylafax and send T38? I know that Asterisk does T38, the question is how to get the data from Hylafax and back...

  Read the article

• What's wrong with this HTTP POST request?

  - by bigboy

  I'm trying to fuzz a server using the Sulley fuzzing framework. I observe the following stream in Wireshark. The error talks about a problem with JSON parsing, however, when I try the same HTTP POST request using Google Chrome's Postman extension, it succeeds. Can anyone please explain what could be wrong about this HTTP POST request? The JSON seems valid. POST /restconf/config HTTP/1.1 Host: 127.0.0.1:8080 Accept: */* Content-Type: application/yang.data+json { "toaster:toaster" : { "toaster:toasterManufacturer" : "Geqq", "toaster:toasterModelNumber" : "asaxc", "toaster:toasterStatus" : "_." }} HTTP/1.1 400 Bad Request Server: Apache-Coyote/1.1 Content-Type: */* Transfer-Encoding: chunked Date: Sat, 07 Jun 2014 05:26:35 GMT Connection: close 152 <?xml version="1.0" encoding="UTF-8" standalone="no"?> <errors xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf"> <error> <error-type>protocol</error-type> <error-tag>malformed-message</error-tag> <error-message>Error parsing input: Root element of Json has to be Object</error-message> </error> </errors> 0

  Read the article

• How to configure SCSI hard drives and RAID for Poweredge 2850 web server

  - by Saul

  I'm trying to set up a Poweredge 2850 as a web server, but as a server novice it's causing me some confusion. Its a virgin install so no data to be lost as yet, so I'd like to get the best arrangement for setting up Windows Server 2008. The box will run IIS, a mail and FTP server. The current physical arrangement of the hot swap drives is 1 73GB 3 146GB 5 blank 0 73GB 2 146GB 4 146GB (but flashes green, amber off) When I enter the PERC config screens on boot up I've got Raid Ch- 0 ID 0 ONLIN A00-00 1 ONLIN A00-01 2 ONLIN A01-00 3 ONLIN A01-01 4 HOTSP I think that drives 0 and 1 are set to RAID 1 and drives 2 and 3 are also set to RAID 1, certainly I can see 2 logical drives, both raid 1 of 69880MB and 139900MB Now what I think I am getting here is that the 2 73GB drives mirror each other and the 2 146GB drives mirror 2? so by my noob thinking if a drive fails I can pull it, insert and new one and it will reduplicate from its matching pair? I think the flashing amber probably indicates a failing drive in slot 4, should that just be binned? What confuses me coming from a home user XP background is that when I load up Windows Server 2008 OS under my computer I only see a C drive of about 70GB capacity. i.e wheres the 146GB drive? Any advice appreciated

  Read the article

• Cisco Pix 515 ip addressing

  - by Rickard

  I have just gotten my hands on a Cisco Pix 515 (not 515E) with 3 interfaces, and are just about to start some labs. In my lab, I am using a real life scenario from an actual setup at work. As I have no access to the device at work, I am simply trying to replicate the scenario by trial and error. At work, we are given two IP addresses from the provider, which is 1-to-1 nated addresses. The addresses we are allowed to use are: 10.131.35.4-5/29 Now, we have 3 servers on a DMZ, 192.168.2.2-4/24 and 17 client computers on 192.168.1.100-117/24 aswell as some static addressed devices on 192.168.1.8-18/27 My question is, how would I best set up so that the machines on the DMZ get's translated to 10.131.35.4 and the machines on 192.168.1.* will be translated to 10.131.35.5 I don't expect or want anyone to give me a fully functional config, I may learn from it, but I'd prefer to just have some advices or maybe a guide on how to set it up. I hope someone can shed some light over my situation, have been looking through google but I guess I don't the searchwords I'm using isn't too good as I can't find any good clues. THank you very much! PS. Maybe I should add, I am not unfamiliar with the Cisco CLI, as I prefer using that before any gui's. So not really looking for any solutions for the ASDM. DS.

  Read the article

• CentOS OpenVZ fail to boot after kernel update

  - by SkechBoy

  After upgrading to latest OpenVZ kernel CentOS server won't boot. When i try go boot the latest kernel server is stuck at this point: (note that images are taken from virtual kvm) http://i.stack.imgur.com/4lusz.jpg Then i try to start the server on some old kernels and than i get this error message: kernel panic - not syncing - attempted to kill init better shown on this image: http://i.stack.imgur.com/2SReF.jpg Here is some useful information fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2995.7 GB, 2995739688960 bytes 255 heads, 63 sectors/track, 364211 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004c4e4 Device Boot Start End Blocks Id System /dev/sda1 1 523 4199044+ 82 Linux swap / Solaris /dev/sda2 524 785 2104515 83 Linux /dev/sda3 786 261869 2097157230 83 Linux /dev/sda4 261870 364211 822062115 83 Linux /etc/fstab proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/sda1 none swap sw 0 0 /dev/sda2 /boot ext3 defaults 0 0 /dev/sda3 / ext3 defaults 0 0 /dev/sda4 /home ext3 defaults 0 0 and grub config file: title OpenVZ (2.6.18-274.18.1.el5.028stab098.1) root (hd0,1) kernel /vmlinuz-2.6.18-274.18.1.el5.028stab098.1 ro root=/dev/sda3 vga=0x317 selinux=0 initrd /initrd-2.6.18-274.18.1.el5.028stab098.1.img title OpenVZ (2.6.18-274.7.1.el5.028stab095.1) root (hd0,1) kernel /vmlinuz-2.6.18-274.7.1.el5.028stab095.1 ro root=/dev/sda3 vga=0x317 selinux=0 initrd /initrd-2.6.18-274.7.1.el5.028stab095.1.img title OpenVZ (2.6.18-194.8.1.el5.028stab070.4) root (hd0,1) kernel /vmlinuz-2.6.18-194.8.1.el5.028stab070.4 ro root=/dev/sda3 vga=0x317 initrd /initrd-2.6.18-194.8.1.el5.028stab070.4.img Any help is greatly appreciated Thanks.

  Read the article

• Dante (SOCKS server) not working

  - by gregmac

  I'm trying to set up a SOCKS proxy using dante for testing purposes. However, I can't even get it to work with a web browser, after looking at several tutorials on how to do that. I've tried in both IE and Firefox, in both cases, using "Manual proxy configuration", leave everything blank except for SOCKS host, and then put in the IP of my proxy and the port number (1080). I just get "Server not found" / "Problems loading this page" and don't see anything in danted, even running in debug mode. If I do a "telnet 10.0.0.40 1080" I do see the connection open in danted debug output, so I know that much is working. Here's my config: logoutput: stdout /var/log/danted/danted.log internal: eth0 port = 1080 external: eth0 method: username none #rfc931 user.privileged: proxy user.notprivileged: nobody user.libwrap: nobody connecttimeout: 30 # on a lan, this should be enough if method is "none". client pass { from: 10.0.0.0/8 port 1-65535 to: 0.0.0.0/0 } client pass { from: 127.0.0.0/8 port 1-65535 to: 0.0.0.0/0 } client block { from: 0.0.0.0/0 to: 0.0.0.0/0 log: connect error } block { from: 0.0.0.0/0 to: 127.0.0.0/8 log: connect error } pass { from: 10.0.0.0/8 to: 0.0.0.0/0 protocol: tcp udp } pass { from: 127.0.0.0/8 to: 0.0.0.0/0 protocol: tcp udp } block { from: 0.0.0.0/0 to: 0.0.0.0/0 log: connect error } I'm sure I'm probably missing something simple, but I'm lost. I haven't even thought about SOCKS since the late 90's.

  Read the article

• Ruby Passeger + Nginx or lighthttpi + fgci for shared hosting

  - by devnull

  I have set up a passenger + nginx setup and I plan to offer a free non-commercial hosting (or in fact on the fly deployment) for rack-based frameworks (e.g. camping, sinatra). I am facing an "issue" with passenger. For each application you need to configure nginx.conf (it would be the same with apache so it is not an nginx issue) with: server { ... passenger_base_uri /app1; passenger_base_uri /app2; passenger_base_uri /app3; } Now this is not inherently bad as, in theory, I could allow a user to run just one app on his webspace but even in this case I need to create a new server directory on nginx e.g. (user.domain.com). As this will mainly be used to deploy apps the behavior I am looking at is more the possibility to auto map several apps (e.g. app1, app2, app3, app4) under the same server (your app.com/app1 yourapp.com/app2) without having to update the nginx or apache file each time. This seems to be a limitation in passenger. As such I am thinking about an alternative with lighttpd and fastcgi. Would this allow immediate deployment without touching the lighttpd config file e.g. I create a new directory with app2 and it will run immediately ? What is your experience in performance difference between passenger + nginx vs. lighttpd + fastcgi ? thanks in advance scenario details: on nginx + passenger - user cannot add a new sub-folder and run another sinatra/camping app without declaring the path on nginx.conf and restarting the server; wished behavior with the new setup: - user can add a new folder with a new app and it would run on lighttpd+fcgi without any extra configuration of the web server;

  Read the article

• MySQL encoding problem after site move

  - by Quan Zhou

  Guys, I need your help. Since last month my friend has lost his database on Dreamhost, he decided to move his wordpress based blog site (written in Chinese) to my server. He's using a wp-plugin called wp-db-backup to perform regular db backups. And the servers backgrounds are: Dreamhost: Linux 2.6.31.5-modsign-aufs2-grsec-2-opt mysql Ver 14.12 Distrib 5.0.16, for pc-linux-gnu (i386) using readline 5.0 apache2 unknown version My Server: Linux li159-46 2.6.32.12-x86_64-linode12 mysql Ver 14.14 Distrib 5.1.45, for debian-linux-gnu (x86_64) using readline 6.1 nginx 0.8.36 His site's encoding was UTF-8 in both wp-config and db. I imported his db backup file in UTF-8 by default, then I sync'd files using rsync from dreamhost, then I just changed the db address and nothing more. But when I take first look at the "new" site, it was full of unreadable characters, I met this problem before, I changed charset options in browser but none of them can make it displayed properly. Then I converted his db to GB18030, it works with only if browser set charset to GB18030 either GBK, but by default they recognize the charset as UTF-8. I tried to edit the headers but it doesn't work. What could I do now? Thx~~

  Read the article

• ColdFusion 9 server not restaring - “Permission denied” errors

  - by Xevi Pujol

  I had to restart my ColdFusion 9 server on CentOS because of a memory performance issue, but now the server won't restart again. When looking at cfserver.log I can see how there's "Permission denied" errors all along. The ColdFusion application folder (/opt/coldfusion9/) is owned by nobody:root, as that fixed a similar problem that we had a few weeks ago. Also, the last time this CF server was running correctly, the JRE user that was being used was nobody. Maybe CF is trying to restart using another user (presumably apache) and that creates permission issues? However, I'm not sure how to check this hypothesis. Where's the config file that tells CF what JRE user to utilize? If I can change that, I could try to specify nobody there. Any other ideas also welcome. UPDATE: The runtime user that Coldfusion will utilise is defined in /etc/init.d/coldfusion_9. I fixed the problem by being consistent with the users: I needed to revert the ownership of the folder /opt/coldfusion9/ back to apache:root, which matches the init file.

  Read the article

• Apache LDAP auth: denied all time

  - by Dmytro

  There is my config (httpd 2.4): <AuthnProviderAlias ldap zzzldap> LDAPReferrals Off AuthLDAPURL "ldaps://ldap.zzz.com:636/o=zzz.com?uid?sub?(objectClass=*)" AuthLDAPBindDN "uid=zzz,ou=Applications,o=zzz.com" AuthLDAPBindPassword "zzz" </AuthnProviderAlias> <Location /svn> DAV svn SVNParentPath /DATA/svn AuthType Basic AuthName "Subversion repositories" SSLRequireSSL AuthBasicProvider zzzldap <RequireAll> Require valid-user Require ldap-attribute employeeNumber=12345 Require ldap-group cn=yyy,ou=Groups,o=zzz.com </RequireAll> </Location> The Require valid-user is work. But ldap-attribite, ldap-filter, ldap-group does not work - denied in logs all time. I spent a lot of time but can't understand what's going on. This is the example of my logs: [Tue Sep 25 16:42:26.772006 2012] [authz_core:debug] [pid 23087:tid 139684003014400] mod_authz_core.c(802): [client 1.1.1.1:52624] AH01626: authorization result of Require valid-user : granted [Tue Sep 25 16:42:26.772014 2012] [authz_core:debug] [pid 23087:tid 139684003014400] mod_authz_core.c(802): [client 1.1.1.1:52624] AH01626: authorization result of Require ldap-attribute employeeNumber=12345: denied I checked all info with ldapsearch: there is a valid username, employee ID and other...

  Read the article

• Apache mod_proxy with SSL not redirecting

  - by simonszu

  I have a custom server running behind an apache reverse proxy. Since the custom server can only handle HTTP traffic, i am trying to use apache for wrapping proper SSL around it, and for some kind of HTTP authentication. So i enabled mod_proxy and mod_ssl and modified sites-available/default-ssl. The config is as following: <Location /server> order deny,allow allow from all AuthType Basic AuthName "Please log in" AuthUserFile /etc/apache2/htpasswd Require valid-user ProxyPass http://192.168.1.102:8181/server ProxyPassReverse http://192.168.1.102:8181/server </Location> The custom server is accessible from the internal network via the location specified in the ProxyPass directive. However, when the proxy is accessed from the outside, it presents the login prompt, and after successfully authenticated, i get a blank page with the words The resource can be found at http://192.168.1.102:8181/server. When i type the external URL again in an already authenticated browser instance, i am properly redirected to the server frontend. The access.log is full of entrys stating that my browser does successful GET requests, and the proxy is happily serving the /server ressource. However, the ressource isn't containing the server's frontend, but this blank page with these words on it.

  Read the article

• OpenSwan (IPSEC) on Fedora 13 with Snow Leopard as a client

  - by sicn

  I recently installed OpenSwan on my Fedora 13 machine. I want to use it to connect with Mac OS X with L2TP over IPSEC, unfortunately I am already stuck on the IPSEC-negotation part. My server is running behind a NATted firewall so my external IP differs from the server's IP. The server has a fixed IP on the network and the same is almost always valid for the clients (they are usually behind a NATted firewall). I installed OpenSwan on Fedora 13 and have following configuration: config setup protostack=netkey nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off nhelpers=0 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=my.servers.external.ip leftprotoport=17/1701 right=%any rightprotoport=17/0 IPSEC starts fine and listens to UDP 500 and 4500. These two ports are opened in the firewall and are forwarded fine to the server. In my /etc/ipsec.secrets file I have my.servers.external.ip %any: "LongAndDifficultPassword" And finally in my sysctl.conf (the redirect-entries are there because OpenSwan was strongly protesting about send/accept_redirects being active) I have net.ipv4.ip_forward = 1 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.all.accept_redirects = 0 Running "ipsec verify" gives me "all greens" (except Opportunistic Encryption Support, which is DISABLED), however, when trying to connect my Mac gives me following in the logs: Nov 1 19:30:28 macbook pppd[4904]: pppd 2.4.2 (Apple version 412.3) started by user, uid 1011 Nov 1 19:30:28 macbook pppd[4904]: L2TP connecting to server 'my.servers.ip.address' (my.servers.ip.address)... Nov 1 19:30:28 macbook pppd[4904]: IPSec connection started Nov 1 19:30:28 macbook racoon[4905]: Connecting. Nov 1 19:30:28 macbook racoon[4905]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Nov 1 19:30:31 macbook racoon[4905]: IKE Packet: transmit success. (Phase1 Retransmit). Nov 1 19:30:38: --- last message repeated 2 times --- Nov 1 19:30:38 macbook pppd[4904]: IPSec connection failed Any ideas at all?

  Read the article

• sysctl.conf not running on boot

  - by Brian

  At what point is sysctl.conf supposed to be read during boot, and why might it not be running? I have the following settings which are not being applied when I reboot: net.bridge.bridge-nf-call-arptables = 0 net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-filter-pppoe-tagged = 0 net.bridge.bridge-nf-filter-vlan-tagged = 0 fs.nfs.nlm_udpport = 32768 fs.nfs.nlm_tcpport = 32768 The first section is needed for KVM bridging, and the second is to run the NFS lock manager on a known port. However, after booting, these values have not taken effect. If I run sysctl -p, then they do. This wouldn't be a huge issue, except that I can't figure out how to restart the lock manager without rebooting. I would really like to know why sysctl.conf isn't working at boot, but I'd settle for just being able to restart the lock manager. This is on Ubuntu server 10.04.2, kernel 2.6.32-31-server. I know some daemons check the permissions on their config files and refuse to work if they're too permissive, but sysctl.conf is 644 root:root, which I'm pretty sure is the default.

  Read the article

< Previous Page | 468 469 470 471 472 473 474 475 476 477 478 479  | Next Page >