Search Results

Search found 29554 results on 1183 pages for 'human computer interface'.

Page 474/1183 | < Previous Page | 470 471 472 473 474 475 476 477 478 479 480 481  | Next Page >

  • Where do I connect the HDD LED wires on my RAID adapter?

    - by Giffyguy
    I'm using a Promise FastTrak TX8660 with RAID 5. The manual (and Google) just doesn't seem to explain how exactly to connect a standard two-pin HDD LED wire to the eight available pins on the card. The Manual just says - To connect your LED, follow the following diagram: The card itself resembles the diagram: But it doesn't make any sense to me. All I have is a two-pin connecter for HDD LED on the front of my computer case. I don't need anything fancy like the fault LED or seperate indicators for each drive. I just want to be able to see when my RAID 5 array is working, that's all. I don't know what the "R" and "G" stand for, but my HDD LED wires are red and white. I tried connecting the red wire to the "R" pin and the white wire to the "G" pin, but that just makes the LED on the front of my case light up indefinitely, even when the computer is idle. Which pins am I suppose to connect the HDD LED header to for basic activity indication?

    Read the article

  • Cliq Wireless questions

    - by Nathan Adams
    Heres the deal: I am by no means a Linux expert, even less when it comes to the Android OS but lets see if we can't solve this problem. The problem I am having is that on the Cliq we have a broadcom chip. In order to use the wireless card you must first insert the module into the kernel. Fine: # insmod /system/lib/dhd.ko insmod /system/lib/dhd.ko # lsmod lsmod dhd 164936 0 - Live 0xbf000000 # BUT netcfg (or ifconfig in busybox) does not recognize that there is a wireless adapter there: # netcfg netcfg lo UP 127.0.0.1 255.0.0.0 0x00000049 dummy0 DOWN 0.0.0.0 0.0.0.0 0x00000082 rmnet0 UP 14.67.164.2 255.255.255.252 0x00001043 rmnet1 DOWN 0.0.0.0 0.0.0.0 0x00001002 rmnet2 DOWN 0.0.0.0 0.0.0.0 0x00001002 usb0 DOWN 0.0.0.0 0.0.0.0 0x00001002 # busybox ifconfig busybox ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:282 errors:0 dropped:0 overruns:0 frame:0 TX packets:282 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:18754 (18.3 KiB) TX bytes:18754 (18.3 KiB) rmnet0 Link encap:Ethernet HWaddr EE:83:E8:B4:4A:ED inet addr:14.x.x.x Bcast:14.67.164.3 Mask:255.255.255.252 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7148 errors:0 dropped:0 overruns:0 frame:0 TX packets:7659 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2609236 (2.4 MiB) TX bytes:908575 (887.2 KiB) # For giggles if we attempt to launch wpa_supplicant anyways we get this: # wpa_supplicant -Dwext -ieth0 -c/data/misc/wifi/wpa_supplicant.conf wpa_supplicant -Dwext -ieth0 -c/data/misc/wifi/wpa_supplicant.conf ioctl[SIOCSIWPMKSA]: No such device ioctl[SIOCSIWMODE]: No such device Could not configure driver to use managed mode ioctl[SIOCGIFFLAGS]: No such device Could not set interface 'eth0' UP ioctl[SIOCGIWRANGE]: No such device ioctl[SIOCGIFINDEX]: No such device CTRL-EVENT-STATE-CHANGE id=-1 state=0 ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWAUTH]: No such device WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver. ioctl[SIOCSIWAUTH]: No such device WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: No such device WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAP]: No such device ioctl[SIOCGIFFLAGS]: No such device # In dmesg we get: <4>[18300.494065] dhd_oob_enable_intr : enable <4>[18305.019976] dhd_net_start failed bus is not ready <4>[18305.020278] dhdsdio_probe: dhd_net_start failed! Do I need to specify the firmware with insmod? Why are we trying to control the interface manually instead of through the Android API? The Android API doesn't support ad-hoc connections as far as I can tell. The card, I am sure, most certainly can.

    Read the article

  • Why is my Compaq NC8430 laptop so darned HOT ?

    - by Cheeso
    For a long time I've had a Compaq nc8430 laptop. It's nearly 3 years old now. Originally shipped with WinXP, but I installed Vista on it. From the very start it was not a good experience. This thing has one of those "stickpoint" mice, which I like. After a while, I noticed that the computer was generating lots and lots of heat. So much heat, that the stickpoint bumper would melt and disintegrate. Normally I would expect heat if the CPU was working hard, but even when the CPU was idle, the computer was hot. Much too hot to keep on my lap. Turns out this is not an uncommon problem. I installed the HWmonitor tool, and found that the CPU temp was 82C when it was plugged in - pretty darn hot. And because the temp was so high, the fan never turned off, so the laptop was as loud as a jet engine, always. If I unplugged it from A/C power, the screen would dim and the temperature would decrease, and the fan noise would lessen, but still, it was too loud. It's totally unusable. What is the problem?

    Read the article

  • Archlinux/atheros WLAN configuration troubles

    - by GrinReaper
    I'm trying to config archlinux to use my wireless network adapter. It's quite troublesome. From what I've gathered, it's an atheros network adapter, using the ath5k driver/module... I can't get it to work; any ideas? Here's some of the output from my tinkering: # lspci | grep -i net 00:0a.0 Ethernet controller: nVidia corporation MCP67 Ethernet (reva2) 03:00.0 Ethernet controller: atheros communications inc. AR5001 Wireless Network Adapter (rev01) # lsusb ... Bus 004 Device 003: ID 03f0:17d Hewlett Packard Wireless (Bluetooth + WLAN Interface [Integrated Module] # ping -c 3 www.google.com ping: unknown host www.google.com #ping -c 3 8.8.8.8 ping: network is unreachable # lspci -v 03:00.0 Ethernet controller: atheros communications inc. AR5001 Wireless Network Adapter (rev01) ... Kernel driver in use: ath5k Kernel modules: ath5k # dmesg |grep ath5k registered as phy0 registered led device ath5k: atheros chip found PCI INT A disabled registered led device registered as phy1 # ip addr | sed '/^[0-9]/!d;s/: <.*$//' 1: lo 2: eth1 3: eth0 # ip link set <interface> up/down RNETLINK answers: Operation not possible due to RF-kill Also, is there a way to dump text from command-line to a text file so i can just copy pasta? Sorry, first time using a linux distro... EDIT: So I just tried this: I actually just did this twice. (I can't tell which setting is on/off for my wireless adapter. The lights are blue all the time now.) #rfkill list 0: hp-wifi: wireless lan softblocked: no hardblocked :yes 1: hp-bluetooth: bluetooth softblocked: no hardblocked :yes 3: phy1: wireless lan softblocked: no hardblocked :yes #rfkill list 0: hp-wifi: wireless lan softblocked: no hardblocked :no 1: hp-bluetooth: bluetooth softblocked: no hardblocked no 3: phy1: wireless lan softblocked: no hardblocked :yes 7: hci0: bluetooh 0: hp-wifi: wireless lan softblocked: no hardblocked :no I've dug around some other articles and it seems like ath5k is supposed to be preferable to madwifi, so should i be using madwifi? I'm 99% sure I disabled the hardblock (by turning it ON) but, as shown above, phy1 wireless lan is STILL hardblocked. What gives? Maybe I've made some more fundamental error in a basic config file? EDIT: I've fixed the hardblock. I've tried pinging www.google.com, but to no avail. I get: ping: unknown host www.google.com In the arch wiki: Edit /etc/hosts and add the same HOSTNAME you entered in /etc/rc.conf: 127.0.0.1 archlinux.domain.org localhost.localdomain localhost archlinux To my understanding, hostname is just a user-specified and based on preference(?) My /etc/rc.conf: HOSTNAME="gestalt" My /etc/hosts: 127.0.0.1 localhost.localdomain localhost gestalt but should it be the following? 120.0.0.1 localhost.domain.org localhost.localdomain localhost gestalt

    Read the article

  • NTBackup Error: C: is not a valid drive

    - by Chris
    I'm trying to use NtBackup to back up the C: Drive on a Microsoft Windows Small Business Server 2003 machine and get the following error in the log file: Backup Status Operation: Backup Active backup destination: 4mm DDS Media name: "Media created 04/02/2011 at 21:56" Error: The device reported an error on a request to read data from media. Error reported: Invalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. Error: C: is not a valid drive, or you do not have access. The operation did not successfully complete. I'm using a brand new SATA Quantum Dat-72 drive with a brand new tape (tried a couple of tapes). I carry out the following: Open NTBackup Select Backup Tab Tick the box next to C: Ensure Destination is 4mm DDS Media is set to New Press Start Backup Choose Replace the data on the media and press Start Backup NTBackup tries to mount the media Error Message shows: The device reported an error on a request to read data from media. Error reported: INvalid command. There may be a hardware or media problem. Please check the system event log for relevant failures. On checking the log I find the following: Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8018 Date: 04/02/2011 Time: 22:02:02 User: N/A Computer: SERVER Description: Begin Operation For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. and then; Event Type: Information Event Source: NTBackup Event Category: None Event ID: 8019 Date: 04/02/2011 Time: 22:02:59 User: N/A Computer: SERVER Description: End Operation: The operation was successfully completed. Consult the backup report for more details. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

  • Does anyone know a way to interact with HP OV(NNM) with python, perl or bash?

    - by marc.riera
    Do anyone know if there is out there any API/library to access NNM database from perl or python? We have a NNM 7.53 which give us access to its data with its java based applet through http. And of course through the 'ovw' GUI interface. I've tried to use Mechanize and selenium2(webdriver) to automatize some checks. The pourpose is to integrate it with our other monitoring services on our "general master console". Many thanks. Marc

    Read the article

  • Acer Aspire One (mini) mfgd 9/03 locks up also when plugged in

    - by LAURIE ANN
    My problem is almost the same as the Toshiba user (Toshiba A205-5804 freezes when plugged in): Well I have a Toshiba A205-5804 and the problem is that the screen freezes anytime I plug the pc into the external power supply, not as most of the computers having the same issue, my computer DOES freeze in safe mode, and I really can't bear this problem for much longer... It's not an overheat problem, the computer is not getting hot or anything related, I've tried already to change the AC adapter, to boot only with AC and no battery, and also all of these suggestions: The only difference in my case is: I can be using the battery and when it runs down, I can just close the lid and the system goes into hibernation mode. I then plug it in and let it charge. When I think it's finally charged, I can UNPLUG it, open the lid and all is running fine on the battery again. Note: the system was NOT shut down and it still runs as long as I remove the power plug before opening the lid. I have ALL the same issues as the other Toshiba user, also. I was a tech for 9 yrs in my own business and this one has not only stumped me, but anyone I have asked has never heard of this problem. Every repair center wants to charge me for diagnosis, even is they cannot fix it. I would really like to run this system along side of my new Acer Aspire 17" laptop as I need it to finish my grad school work. Any ideas would be GREATLY appreciated. Thanx, Laurie Ann

    Read the article

  • You need to format the disk in drive

    - by Sab
    I was copying some files over to my external hard disk and suddenly a message popped up saying that some file was open and it could not continue.It asks me whether I want to cancel the operation and I said cancel(The other operation was continue.) After that whenever I plug in the usb into the same computer it does not work. It keeps saying that I need to format the disk to continue. Luckily for me it opened on another computer and am backing up all my data. But now I am wondering why exactly this happened. Is it that the hard disk is weak. Also as an addon I currently use http://www.dtidata.com/windowssurfacescanner/ program to check for bad sectors. Is this the recommended way or is there some other better more reliable way to check if my hard disk is failing? Also could the above problem be because the hard disk is failing? If not why does it happen.Even if the hard disk is interrupted in the middle of a read write cycle doesnt there exist error handling code to enable gracefull recovery?

    Read the article

  • Windows RDP cannot connect to x64 server from XP SP3+ [closed]

    - by Tom
    Hi all, I have a strange problem that I can't seem to find the answer to anywhere online. The issue has to do with using Windows RDP to connect to our servers. Here is what works: -XP/Vista client (any SPs) connecting to 32-bit Server 2003 machine -XP (SP2 and lower) client conecting to 64-bit Server 2003 machine Here is what does not work: - XP SP3+/Vista client connecting to 64-bit Server 2003 machine It appears that the issue is that XP SP3 and Vista clients cannot connect to x64 Server 2003 boxes. After entering the username/password, we get an error message saying the below, and the connection drops: To log on to this remote computer, you must have Terminal Server User Access persmissions on this computer. By default, members of the Remote Desktop Users group have these permissions. If you are not a member of the Remote Desktop Users group or another group that has these persmissions, or if the Remote Desktop User group does not have these permissions, you must be granted these permissions manually. The issue is that the user is a member of the Administrators group, which has permission. Also, logging in using the same username, but from an XP SP2 machine, has no problems at all. I hope I explained this well enough, and any help/insight that can be given would be greatly appreciated. Thanks, Tom

    Read the article

  • Desktop.ini Issues/Confusion

    - by EpicDavi
    BACKSTORY: I was out of town for a while and I forgot to turn my computer off. When I came back I saw that a desktop.ini file was on my desktop (using Windows 7). I thought that was odd because I knew it was a system file and it usually didn't show up due to the fact that I had disable the feature to show system files. Also it wasn't translucent like the other system files. I went to my control panel and saw that the "Hide protected operating system files" was indeed enabled. This puzzled me so I disabled the setting and another one was on my desktop like it usually is hidden. So now I have to desktop.ini files on my desktop: one hidden and one not hidden. I am doing an antivirus check to see if anything was going on and I will give an update soon. I am pretty sure these files are harmless and could be deleted but I would rather get another person's opinion on the subject. Thanks! UPDATE: I did an anti-virus scan and it seems I have no problems. It is odd because the file seems to maintain system file properties such as not being able to be edited and other things. Also I have tried restarting my computer and it is still not hidden. So the question remains: What should I do with the file and what caused it?

    Read the article

  • bitbucket on my own server

    - by valya
    I want to have something like bitbucket.org or github (but for mercurial!) on my VDS. I don't need full functionality, but I need it being able to serve repositories, accept changes (with auth!) and creating new repos in one-two clicks in web interface. What can I use? Thanks

    Read the article

  • Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine [migrated]

    - by javadba
    I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

    Read the article

  • Dual boot nt4 and windows 98

    - by ItFinallyWorks
    I am trying to dual boot nt4 and windows 98 se (don't laugh - old computer). I have seen Microsoft's instructions for doing this, but it limits windows 98 to have a Fat16 partition (NT4's NTLDR doesn't understand FAT32) and therefore only 2GB of disk space. I really need it to have more than that. I started with Win 98 (on the 1st partition), repartitioned the disk, then added NT4 on the 2nd partition. NT4 took over the bootloader (as expected), so NT4 boots, but Win 98 doesn't. Right now I am working in VMWare so I can use nonpersistent hard drives (IDE like the real computer) to recover from errors easily. I've tried using XPs NTLDR using the instructions here: http://www.nu2.nu/fixnt4/ , but I got weird errors from NT4 and it never really worked. If XP's NTLDR would work, that should be able to boot both OSes. I've also tried using GRUB. In theory that should work. In fact when booting from super grub disk, it does. But as soon as I install grub to disk, Win 98 boots, but NT 4 blue screens at boot with a 0x0000007b inaccessible_boot_device error (that can be alot of things see MS kb 822051). The incantation I'm using for GRUB 1 is rootnoverify (hd0,1) makeactive chainloader +1 boot So, anybody have some suggestions?

    Read the article

  • Windows RDP cannot connect to x64 server from XP SP3+

    - by Tom
    Hi all, I have a strange problem that I can't seem to find the answer to anywhere online. The issue has to do with using Windows RDP to connect to our servers. Here is what works: -XP/Vista client (any SPs) connecting to 32-bit Server 2003 machine -XP (SP2 and lower) client conecting to 64-bit Server 2003 machine Here is what does not work: - XP SP3+/Vista client connecting to 64-bit Server 2003 machine It appears that the issue is that XP SP3 and Vista clients cannot connect to x64 Server 2003 boxes. After entering the username/password, we get an error message saying the below, and the connection drops: To log on to this remote computer, you must have Terminal Server User Access persmissions on this computer. By default, members of the Remote Desktop Users group have these permissions. If you are not a member of the Remote Desktop Users group or another group that has these persmissions, or if the Remote Desktop User group does not have these permissions, you must be granted these permissions manually. The issue is that the user is a member of the Administrators group, which has permission. Also, logging in using the same username, but from an XP SP2 machine, has no problems at all. I hope I explained this well enough, and any help/insight that can be given would be greatly appreciated. Thanks, Tom

    Read the article

  • Windows won't sleep after booting from grub

    - by mkasberg
    I recently added a second hard drive to my computer and I am using it do dual-boot Linux (Ubuntu 12.04) with Windows 7. Both hard drives are SATA. I am using the default grub bootloader on my second hard drive. The windows drive is unmodified. To get to grub, I changed the hard disk boot priority in my BIOS (P35-DS3L) to boot from the second drive. The problem I'm having is that when I boot to Windows 7 (on sda) from grub (on sdb), Windows 7 will not go to sleep (from the start menu). The display shuts off momentarily as if its going to sleep, then comes back on and displays the switch-user screen. Powercfg -lastwake does not show anything. I am sure that this is related to booting from grub on sdb because when I change the hard disk boot priority in the BIOS to boot from my (unmodified) Windows hard disk, the computer goes to sleep fine. It occurred to me that installing grub on sda might solve the problem, but I'd rather not since I like to have my windows hard disk unmodified so that booting to it from the BIOS boots directly to windows. A possible work around is to use the BIOS as a bootloader, by pressing F8 to select the boot device. Still, I'd like to know why the problem is happening in the first place.

    Read the article

  • mpirun -np N, what if N is larger than my core number?

    - by Daniel
    Say I have a 4-core workstation, what would linux (Ubuntu) do if I execute mpirun -np 9 XXX Q1. Will 9 run immediately together, or they will run 4 after 4? Q2. I suppose that using 9 is not good, because the remainder 1, it will make the computer confused, (I don't know is it going to be confused at all, or the "head" of the computer will decide which core among the 4 cores will be used?) Or it will be randomly picked. Who decide which one core to call? Q3. If I feel my cpu is not bad and my ram is okay and large enough, and my case is not very big. Is it a good idea in order to fully use my cpu and ram, that I do mpirun -np 8 XXX, or even mpirun -np 12 XXX. Q4. Who decides all of these effciency optimization, Ubuntu, or linux, or motherboard or cpu? Your enlightenment would be really appreciated.

    Read the article

  • Old Visioneer 5800 on Windows 7 64-bit?

    - by dsimcha
    Does anyone know of a way to get an old Visioneer 5800 scanner that's supposed to work with nothing past Windows XP SP1 to work on Windows 7 64-bit? I don't care about all the bells and whistles, just the basic features. Is there any kind of generic TWAIN interface that can be used?

    Read the article

  • Google Chrome not loading web pages correctly unless multiple refreshes

    - by Brandon Wilson
    Webpages in Google Chrome do not load correctly from time to time. I can't reproduce it, it just happens. Some times it happens when I load the browser other times it happens when I am just browsing. Just now I went to five different web sites which 3 out of 5 of them did not load correctly. I have attached a photo of how Super User loaded the first time I loaded it. If I refreshed it it will load correctly. Facebook is bad like this. Some times Facebook will load correctly but some of there back end scripting may not load so the page may not refresh automatically. Not sure what is going on. I have tried other browsers (Firefox and Internet Explorer) and they seem to be working correctly. Chrome seems to be acting up only on this computer. All my computers are running Windows 8 and I have removed Chrome completely off this computer and re-installed. I even disabled all extensions and cleared all the caches. I even tried running Chrome without being logged in. Not sure what else to do at this point. An example of superuser.com not loading correctly: When I refresh the problem will go away until it happens again. Sometimes it takes two or three refreshes in order for it to correctly load.

    Read the article

  • Does a Windows 7 dvd only have one language?

    - by user326639
    I'm a Dutch developer living in Spain. I recently composed a new computer from new parts and I installed Windows 7 Professional 64 bit (OEM) on it. On the web site of the on-line shop there was a note saying "language: Spanish". Because my English is quite a bit better than my Spanish, but mainly because it is much easier to find information on the web in English, I want my OS to be in English. I asked the on-line shop if they also sold the UK version of Windows 7 but they assured me that "all Windows 7 versions are multi-language". With the installation of XP a few years ago, I remember that I was offered the option English or Spanish while the installation process was still in the DOS-like (non-graphical) screen. While installing Windows 7, I did not see any non-graphical screen and the first time I was asked about the language, was in a drop-down list that contained only Spanish. I know about the language pack possibility of Windows 7, but this is not available on Professional. Even if I had Ultimate, I don't know if it would be possible to install Windows in Spanish, and then add English as a second language from a language pack. I get the impression that English has to be the base-language. Furthermore, I am a bit sceptical until I'd see it in action. What happens with shortcuts (i.e. Select All: ctrl-a in English / ctrl-e in Spanish, and what about logging messages in Event Viewer, etc) So can anybody tell me how it works with languages in Windows 7? Have I been misinformed by the computer shop? Could it be that OEM versions of Windows are single language an a full installation is not?

    Read the article

  • Graphics and USB devices freezing soon after OS loads

    - by Andrew
    I run Ubuntu/Windows dual boot. Last night I started the upgrade to Ubuntu 12.04, and my computer has not worked since in either Windows or Ubuntu. Here's what I got when I rebooted after the upgrade, and continue to get every time I boot: Gets to GRUB screen OK. Choose Ubuntu - black screen or crazy purple lines. At first I assumed something went wrong with the upgrade (often happens). Choose Windows - works fine, I log in, but soon after that the graphics freeze (sometimes with purple artifacts). The keyboard and mouse (both USB) also lose power at the same instant, and none of the USB ports have power to them. This happens sooner or later every time I boot. Update: the HDD also appears to lose power at the same point. I have tried a live CD, but my computer refuses to boot any CD even after disabling all other boot options in the BIOS. I have disconnected everything except keyboard, mouse, graphics card with one monitor, one RAM sick and HDD; no change. I also took the little battery out to reset CMOS. I am pretty sure no matter how wrong the Ubuntu upgrade went, it wouldn't cause the above symptoms in Windows. So the only explanation I can think of is that a hardware failure occurred at the same time. Some possible causes of this I can think of are: A couple of days before this, I added a third screen (which worked fine). About a week before, my house lost power in a storm (no ill effects over the past few days though). What can I do, other than buy a new motherboard/CPU and hope it works? Unfortunately I don't have another box to swap parts into to test at the moment.

    Read the article

  • How can I disable the CTRL-ALT-DEL key combination completely on XP/Vista/7?

    - by Travesty3
    I have been googling extensively to figure this out, and nobody seems to be able to give a direct answer. Let me start by saying that I'm NOT talking about requiring CTRL-ALT-DEL to enter logon information. I'm working on a golf simulator program which is used at golf centers. I need the ability to completely disable the CTRL-ALT-DEL key sequence so that the golf center customers can't get out of the program and access the computer at all. I realize there are other key combinations that need to be handled as well, we already have this entire feature working in XP, but we're going to be switching to Windows 7 soon, and CTRL-ALT-DEL is the only one that doesn't seem to work in Win7. I'd really like an all-around solution if at all possible. This same program may also be installed on a client's personal computer for an in-home golf simulator, but the computers that really need this feature (golf center computers) are provided to the golf center by us, so would the best option be to write a new shell? I don't know anything about that at all, other than others that suggest writing a new shell for kiosk mode. I'd really like a simpler option, like modifying the registry in some way. I have heard that you can remove some buttons from the menu screen that pops up, but unless I can remove pretty much all of them (including the shutdown/restart button in the bottom-right corner), this won't be enough of a solution for me. Thanks for taking the time to read this and thanks again for any help you could provide! -Travis

    Read the article

  • Parental Controls in Ubuntu - per user

    - by Hamish Downer
    I would like to set up parental controls on Ubuntu for a friend of mine. I want it so that the child user has the controls set, but the parent user is not restricted. To be clear, they are sharing one computer, so a router based solution won't help. And I would like a set of step by step instructions to do this. Just one way of doing it. I'm an experienced Ubuntu user, happy at the command line. I've spent quite some time googling for this along the way. I hope that the GChildCare project will eventually make this easy, but it is not ready yet. In the meantime, the WebContentControl GUI provides a way of managing parental controls, but apply them to every user on the computer (easy WebContentContol install instructions and detailed instructions, discussion and related links on ubuntuforums). The ubuntuforums post has a FAQ that states that user-specific configuration is not possible with WebContentControl, and then provides 3 links he used to help him do it. But they are far from step by step instructions. There is this thread which is notes along the way and linking to this article about squid and dansguardian. And then to these two dansguardian articles which are somewhat in depth ... So does anyone know of an existing guide to how to set up parental controls on ubuntu with some users not affected? If no one has come up with an answer after a little bit, I'll set up a community wiki answer so we can come up with a guide.

    Read the article

  • Kerberos service on win2k dc will not start following disk failure

    - by iwilson68
    Hi, I have a win2k (mixed mode domain) with 4 DCS. One of these also acts an exchange 2000 server which uses 2 logical volumes from an MSA 2000 array. AD etc is stored on local drives. We experienced a problem last week when the raid array fell back to a redundant controller and this temporarily meant that the two logical drives were not visible to the server for around 5 minutes and a couple of reboots. The log records these Events as Type: Warning Event Source: Disk Event Category: None Event ID: 51 Date: 06/11/2009 Time: 11:46:23 User: N/A Computer: server1 Description: An error was detected on device \Device\Harddisk1\DR1 during a paging operation. Following these problems, the server “kerberos Key Distribution” service refuses to start with an “error.31 a device attached to the system is not functioning”. All other automatic start services (including net logon) are running and there are no DNS issues etc. All devices are also functioning but the two logical MSA disks are now numbered in the Windows Disk Management MMC as 2 and 4 and I suspect that they may have previously been identified as disks 1 & 2 and perhaps windows still sees this as an ongoing failure?? Replication has not been affected but obviously there are many audit failures in the security log relating to users and workstations presumably linked to the Kerberos issue. Attempting to manually start the kerberos service generates the following in the System Log. Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7023 Date: 09/11/2009 Time: 09:46:55 User: N/A Computer: Server1 Description: The Kerberos Key Distribution Center service terminated with the following error: A device attached to the system is not functioning. DCDIAG passes all tests except “Advertising” and “Services” which I believe relate directly to the failure of Kerberos only. Any advice would be appreciated.

    Read the article

  • Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine

    - by javadba
    I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

    Read the article

  • PCI-express - is there a typo in the Intel 5500 overview

    - by Martin
    The overview for the 5500 and 5520 chipsets state that there is a total bandwidth of up to 48GB/s on each PCI Express x8 interface. http://www.intel.com/products/server/chipsets/5500-5520/5500-5520-overview.htm My understanding (admittedly from wikipedia) is that PCI-e Gen 2 runs at 500MB/s per lane. The 5520 has 36 lanes, and so would be limited to a total of 18GB/s. Am I missing something here, or is Intel's claimed 48GB/s a typo that should say 18GB/s ?

    Read the article

< Previous Page | 470 471 472 473 474 475 476 477 478 479 480 481  | Next Page >