Search Results

Search found 30804 results on 1233 pages for 'hardware test'.

Page 475/1233 | < Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >

• Poor Write Performance in VM inside Proxmox PVE 2.0

  - by sorsenne

  I am running a PVE 2.0 on a decent Hardware (2 SATA HDDs as RAID1, 12GB RAM, i7 CPU) but the I/O Performance is very poor inside the VM (Ubuntu 11.10 Server). The very same VM was copied to another Server running simply Ubuntu Server with KVM and had better I/O Perf. this is how the HDD is shown in the Guest: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ATA-8: ST3000DM001-9YN166, CC49, max UDMA/133 ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC49 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA I tested with DD: $ dd bs=1M count=128 if=/dev/zero of=test conv=fdatasync 128+0 records in 128+0 records out 134217728 bytes (134 MB) copied, 19.2222 s, 7.0 MB/s on the Host, this same Test will result with 156 MB/s in average. PS: I am using VirtIO and see no error in dmesg.

  Read the article

• Shouldn't WP8 Emulator Work With an Intel Q9650?

  - by Al Bundy

  My comp is as follows: -Windows 8 Pro -Visual Studio 12 Pro -Asus P5Q Pro Turbo -Intel Q9650 (Core 2 Quad 3.0 Ghz) As far as I can tell, this setup should support Windows Phone 8 Emulator, but When I installed Windows Phone 8 SDK, it said that my computer doesn't support hardware virtualization. It says here that it does: http://ark.intel.com/products/35428/Intel-Core2-Quad-Processor-Q9650-(12M-Cache-3_00-GHz-1333-MHz-FSB)

  Read the article

• Windows 8 - When AC Power is disconnected, atibtmon.exe throws a Runtime error

  - by Junior Mayhé

  The installer is not working for my ATI mobility Radeon HD 3670 on Dell XPS Studio 16 using Windows 8 PRO 64 bits. Here are the screenshots of my ATI Radeon configuration: Hardware configuration Software configuration And here is the problem on Windows 8: everytime I disconnect the AC power cord, atibtmon.exe throws a runtime error as follows What could I do to avoid this error? I have installed the legacy driver http://support.amd.com/us/kbarticles/Pages/catalystlegacywin8.aspx but this installer fails (when trying to install the driver).

  Read the article

• IIS running but not serving content

  - by Kyle

  I have an internal dev server running Windows 2k8 R2 with the Web and FTP Server roles set up which won't serve any content at all. Trying to connect from another host via telnet yields 'connection failed': c:\>telnet devserver 80 Connecting To devserver...Could not open connection to the host, on port 80: Conn ect failed Using netstat -an | find "80" on the dev server returns no connections on port 80 (a few on 1801, etc) tcpview confirms this, listing no open connections on port 80. The following services related to the Web role are running: World Wide Web Publishing Service Application Host Helper Service Microsoft FTP Service (ftp connections to port 21 are granted) Windows Process Activation Service The default website bindings are: Type Host Name Port IP Address Binding Information http 80 * net.tcp 808:* net.pipe * net.msmq localhost msmq.formatname localhost When setting up a new application under the default site, the test function passes both connection/authorisation only if the 'connect as' user is local admin, otherwise the test errors with 'invalid application path'. At no point is the W3SVC service PID bound to port 80 (it is running and bound to 21 for ftp). There are no W3SVC log directory at c:\inetpub\logs\LogFiles\ (only FTPSVC2), and no HTTPERR directory at c:\windows\system32\ or c:\windows\system32\logfiles\. There do not appear to be any related errors in the event logs. I'd really appreciate any thoughts on be a good place dig into what's (not) going on here!

  Read the article

• Stack-based keyboard delay using Logitech MX3100 keyboard

  - by Mark S. Rasmussen

  I've been using a Logitech Cordless Desktop MX3100 keyboard for quite a while. I've never really had any problems, except for the occasional typo. I noticed however that I tended make the typo "Laod" instead of "Load", quite a bit more often than any other typos. As it started to get on my nerves, I decided to do some testing. What I found out was than when I write lowercase "load", I'd never make the typo. All uppercase, or just uppercase L, I'd make the typo quite often. My actual (very scientific) testing is probably best described by showing the output: moatmoatmoat MoatMoatMoat loatloatloat LaotLaotLaot loafloafloaf LaofLaofLaof hoathoathoat HoatHoatHoat hoadhoadhoad HoadHoadHoad lortlortlort LrotLrotLrot What i found out was that whenever shift was depressed, typing an uppercase "L" would induce a significant lag if the next character was an "o", compared to the lag of the any other key: High "o" lag: LoLoLoLoLoLo No "a" lag: LaLaLaLaLaLa No lag for neither "o" nor "a": lolololololo lalalalalala By realizing this I regained a slight bit of sanity as I knew I wasn't coming down with a case of Parkinsons. I was actually typing correctly, the lag just interpreted it wrongly. Now, what really bugs me is that I can't fathom how this is occurring. What I'm actually typing, in physical order, is this: L - o - a - d, and yet, the "a" is output before the "o", even though "o" was pressed before "a". So while the keyboard is processing the "Lo" combo, the "a" gets prioritized and is inserted before the "o" is done processing, resulting in Laod instead of Load. And this only happens when typing "Lo", not when typing lowercase "lo". This problem could stem from the keyboard hardware, the receiver hardware or the keyboard software driver. No matter the fault location however, I can't imagine how this could be implemented as anything but a FIFO queue. A general delay, sure, I could live with that, albeit I'd be irritated. But a lag affecting different keys differently, and even resulting in unpredictable outcome - that just doesn't make any sense. I've solved the problem by just switching to a wired keyboard. I just can't shake it off me though; what kind of bug/error/scenario would result in a case like this? Edit: It's been suggested that I stop drinking Red Bull and stick to water instead. While that may actually help solve the issue, I'm really not looking for a solution as such. I'm more interested in an explanation of how this could happen, as I can't imagine any viable technical solution that could result in this behavior.

  Read the article

• Repairing inconsistent pages in database

  - by Raj

  We have a SQL 2000 DB. The server crashed due to Raid array failure. Now when we run DBCC CHECKDB, we get an error that there are 27 consistency errors in 9 pages. When we run DBCC PAGE on these pages, we get this: Msg 8939, Level 16, State 106, Line 1 Table error: Object ID 1397580017, index ID 2, page (1:8404521). Test (m_freeCnt == freeCnt) failed. Values are 2 and 19. Msg 8939, Level 16, State 108, Line 1 Table error: Object ID 1397580017, index ID 2, page (1:8404521). Test (emptySlotCnt == 0) failed. Values are 1 and 0. Since the indicated index is non-clustered and is created by a unique constarint that includes 2 columns, we tried dropping and recreating the index. This resulted in the following error: CREATE UNIQUE INDEX terminated because a duplicate key was found for index ID 2. Most significant primary key is '3280'. The statement has been terminated. However running Select var_id,result_on from tests group by var_id,result_on having count(*)>1 returns 0 rows. Here is what we are planning to do: Restore a pre-server crash copy of the DB and run DBCC CHECKDB If that returns clean, then restore again with no recovery Apply all subequent TLOG backups Stop production app, take a tail log backup and apply that too Drop prod DB and rename the freshly restored DB to make it prod Start prod app Could someone please punch holes in this approach? Maybe, suggest a different approach? What we need is minimum downtime. SQL 2000 DB Size 94 GB The table that has corrupt pages has 460 Million+ rows of data Thanks for the help. Raj

  Read the article

• How do I remove Xen kernel and put normal kernel on RHEL 5

  - by yan bellavance

  I have 3 identical machines (hardware wise) that all have RHEL 5.3 installed. 2 of those machines have the Xen kernel and one doesnt. I cannot install nvidia drivers on the ones that have the xen kernel and so I was wondering how I managed to do this and how to replace them with normal kernels. Could this of happened during install time when for example I was queried on certain components to install? (development,virtualization, webserver)

  Read the article

• XP OEM licensing when reinstalling Windows XP

  - by mindas

  My wife has managed to buy a Dell laptop she was using at her ex-employer that just went bust. The problem with it is the OS (Windows XP) which takes ages to boot and is generally disproportionally slow to the hardware of the machine. So my aim is to sacrifice a day and reinstall it. The problem I am slightly worried about is the licensing/registration/activation hell. Apart from the sticker (with WinXP license key), the laptop has no other paperwork proving this license is legitimate. I believe this was originally an OEM license. Unfortunately, I don't have the the installation CD. This computer also has MS Office installed (which I would like to retain) but it none of MS Office apps would launch due to some obscure error complaining about lack of free disk space (which computer has plenty of). I have absolutely no clue what kind of license this MS Office was. And because the company has gone into the administration, there is no way of getting this information nor installable media. I believe that by buying the hardware I have also acquired the software which I can use as I see fit. Correct me if I'm wrong. Above said, my question would be: What is the easiest way of reinstalling the XP? By easiest I mean avoiding spending my time to prove Microsoft support I've got the right to use the software (insert your computer says noooo joke here) but still being able to get to fresh virgin activated legal state of the XP. I used to work as a sysadmin many years ago so I am not afraid of any technical difficulties. The same question applies to MS Office. I imagine the process would consist of backing up all the data, pulling some bits from the registry and using that on the fresh install. As for reinstall I'd expect to use some sort of OEM Windows repair CD from Dell, right? Are those freely available? My other box (HP) has such a thing and it can't be used on any other brand. I'm sure somebody had to go through this licensing hell and could share his/her tips. Thanks in advance.

  Read the article

• CentOS 5.7 keeps rebooting after fresh installation

  - by Wagner Maestrelli

  I have just installed CentOS 5.7 x86_64 on a new computer. The installation went on without any issues. But, after it finnished, the machine started to show an awkward behaviour: it restarts every time it tries to boot. It happens after all the services have been started. The screen just goes black and it shows an error message from the monitor: Input not supported. And then it reboots. I took a look at the logs, but I couldn't manage to find anything. Any help? Update Before doing the hardware diagnosis, as pointed out, I decided to make some tests. First, I changed the runlevel to 3, adding the 3 parameter at the end of the kernel command. Then, after logging in in text mode, I checked the xorg.conf file out for some problems regarding the screen resolution. There was nothing unexpected set. Well, if there had to be a problem with it, I couldn't start the X server at the command line, right? So, I typed startx and Gnome started! So, probably, it's not an issue with the screen resolution, I suppose. Then I selected the Log Out root... Gnome menu option and something odd happened: the screen went black, the Input not supported monitor error message was displayed and the system rebooted. Yes, the same problem I was having while trying to boot! After that, I decided to try yet another test: I removed the rhgb quiet parameters from the kernel command to see if some error would show up. Well, to my surprise, the boot went on without problems! The Gnome login screen showed up, I logged in and the session started. But then I selected the Shut Down... menu option and guess what? Same problem: black screen, same monitor error and the system rebooted. Yes, it rebooted, it did not shut down. I repeated both of the tests and the behaviours were the same. I really don't know what's going on. It seems to be an issue regarding the changing of the screen mode or something like that. Any ideas? Could this be a hardware problem? Or does it seem to be something regarding the system configuration?

  Read the article

• Mysql Cluster not working on Ubuntu

  - by user53864

  I am unable to setup MySQL Cluster on ubuntu servers. As a starting point I started from the link but I am not successful and the tar ball version I download is 6.3.45. As I wanted to test the mysql cluster, the Data node and SQL node are same but sql never appeared as connected in management node console and it looks like below. [ndbd(NDB)] 2 node(s) id=2 @192.168.1.107 (Version: version number, Nodegroup: 0, Master) id=3 @192.168.1.108 (Version: version number, Nodegroup: 0) [ndb_mgmd(MGM)] 1 node(s) id=1 @192.168.1.105 (Version: version number) [mysqld(API)] 2 node(s) id=4 (not connected, accepting connect from 192.168.1.107) id=5 (not connected, accepting connect from 192.168.1.108) On all the 3 machines mysql-server & client(apt-get install mysql-server mysql-client) were already installed and I completely stopped and also removed them at the system start up. Now the mysqld is from extracted cluster tar ball(/usr/local/mysql/support-files/mysql.server). As for testing, I created a test database on both the data nodes but the tables are also not syncing on other node. I checked many links, configurations are remained similar in all the links but somewhere it's going wrong. Anymore extra package is required?, Could anyone help me here..?. I am trying this for past 3 days... Thank you!

  Read the article

• Apple Magic Mouse on Windows XP SP3

  - by index

  Using generic Windows bluetooth drivers + Apple Wireless Mouse drivers as Bluetooth HID service. The mouse is connected. It just does not do anything. It does not show up under mice in hardware manager, just as Bluetooth HID. Not using the Apple drivers does not work either. I'm using a logilink BT0007

  Read the article

• Strange ASP.NET Queue Performance Counters Behavior?

  - by LemurTech

  We have an ASP.NET 2.0 site running in classic mode. I am seeing very strange behavior in the performance counter values. Perhaps these are bugs (I've been all over Google trying to verify this, without much luck), or perhaps it is just my inexperience with monitoring these things. This PerfMon graph (http://imgur.com/Jv5io5J) represents a load test where I add up to 350 virtual users to the site, at a rate of about 1/sec, performing relatively simple page browsing. At the end of the test, I gradually taper off the number of users. This is a 4 CPU server. Machine.config settings for are at the defaults. The solid blue line is ASP.NET Apps v2.x\Requests Executing for the application in question. The profile makes perfect sense, with a quick ramp-up to 32 executing requests (minWorkerThreads x 4CPUs), followed by a slower ramp-up to 48 ((maxWorkerThreads - minWorkerThreads) x 4CPUs). The solid yellow line is ASP.NET v2.x\Requests Queued. Again, this makes sense: after the initial 32 request threads are activated, the queue begins to build as new thread initialization can't keep pace with incoming requests. But as executing requests reaches its highest possible value of 48, the counter for ASP.NET Apps v2.x\Requests Queued (green solid line) suddenly springs to life and maintains step with the yellow counter. As far as I can tell, and with no other apps running on the server, these two counters should have had the same values from the start. One other odd thing: The counter for ASP.NET v2.x\Request Wait Time (dotted yellow line) also does not spring to life until executing requests reaches 48. Shouldn't I be seeing values here from the moment ASP.NET v2.x\Requests Queued begins to build? And likewise, why would ASP.NET Apps v2.x\Request Execution Time (dotted blue) increase significantly only after that peak of 48 is reached? Shouldn't it ramp-up gradually along with queued requests?

  Read the article

• Is using Windows Update to find Drivers for laptop good enough?

  - by user22105

  I'm trying to install drivers for my laptop after fresh install of Windows 8. From the manufacturer's website, there are many drivers and utilities available. But after running Windows Update(which finds drivers for the hardware on my laptop), I only had to install a few (the ones with Unidentified Device) I'm wondering if this is good enough? or would I skip some important drivers like Chipset Thermo management etc etc that could potentially cause harm to my laptop?

  Read the article

• rs232 PTZ cameras software program for control

  - by Noel

  Does anyone know of a program that would allow you to control multiple IR cameras via usb (computer jack) to rs232 (camera hardware)? We have a cameraswitcher, very low key, that I can press buttons and it willswitch the view of the camera from one to the next. currently I control the cameras by sellecting the cameras via a remote control for change of angles. Does anyone know anything that could give me some ability to do manual controls via my computer?. Please Advise, thanks!

  Read the article

• Reverse proxy setup for distributed storage

  - by vise

  I have 4 file servers that I want to access under a single mount point from another server. This server has a web application that should serve content from the mounted point. I think I can achieve this with glusterfs. Considering that the file servers have fairly powerful hardware, I want to install a webserver on each of them and serve those files via a reverse proxy. Any thoughts on how I may be able to do so?

  Read the article

• Why does "commit" appear in the mysql slow query log?

  - by Tom

  In our MySQL slow query logs I often see lines that just say "COMMIT". What causes a commit to take time? Another way to ask this question is: "How can I reproduce getting a slow commit; statement with some test queries?" From my investigation so far I have found that if there is a slow query within a transaction, then it is the slow query that gets output into the slow log, not the commit itself. Testing In mysql command line client: mysql begin; Query OK, 0 rows affected (0.00 sec) mysql UPDATE members SET myfield=benchmark(9999999, md5('This is to slow down the update')) WHERE id = 21560; Query OK, 0 rows affected (2.32 sec) Rows matched: 1 Changed: 0 Warnings: 0 At this point (before the commit) the UPDATE is already in the slow log. mysql commit; Query OK, 0 rows affected (0.01 sec) The commit happens fast, it never appeared in the slow log. I also tried a UPDATE which changes a large amount of data but again it was the UPDATE that was slow not the COMMIT. However, I can reproduce a slow ROLLBACK that takes 46s and gets output to the slow log: mysql begin; Query OK, 0 rows affected (0.00 sec) mysql UPDATE members SET myfield=CONCAT(myfield,'TEST'); Query OK, 481446 rows affected (53.31 sec) Rows matched: 481446 Changed: 481446 Warnings: 0 mysql rollback; Query OK, 0 rows affected (46.09 sec) I understand why rollback has a lot of work to do and therefore takes some time. But I'm still struggling to understand the COMMIT situation - i.e. why it might take a while.

  Read the article

• Issues with ASP.NET via Apache/mod_mono on Ubuntu.

  - by Matthew Scharley

  I run an Ubuntu test server, and my deployment system is also Ubuntu. I've recently been trying to get ASP.NET to work on my test server so that we can take it live. I managed to get it installed, and configured properly, and my application is installed and running, but I can't get anything to work. The error I keep receiving is below, if anyone has any clue what might be going on, it would be greatly appreciated. Server Error in '/' Application Standard output has not been redirected or process has not been started. Description: HTTP 500. Error processing request. Stack Trace: System.InvalidOperationException: Standard output has not been redirected or process has not been started. at System.Diagnostics.Process.CancelErrorRead () [0x00000] at (wrapper remoting-invoke-with-check) System.Diagnostics.Process:CancelErrorRead () at Mono.CSharp.CSharpCodeCompiler.CompileFromFileBatch (System.CodeDom.Compiler.CompilerParameters options, System.String[] fileNames) [0x00000] at Mono.CSharp.CSharpCodeCompiler.CompileAssemblyFromFileBatch (System.CodeDom.Compiler.CompilerParameters options, System.String[] fileNames) [0x00000] at System.CodeDom.Compiler.CodeDomProvider.CompileAssemblyFromFile (System.CodeDom.Compiler.CompilerParameters options, System.String[] fileNames) [0x00000] at System.Web.Compilation.AssemblyBuilder.BuildAssembly (System.Web.VirtualPath virtualPath, System.CodeDom.Compiler.CompilerParameters options) [0x00000] at System.Web.Compilation.AssemblyBuilder.BuildAssembly (System.Web.VirtualPath virtualPath) [0x00000] at System.Web.Compilation.BuildManager.BuildAssembly (System.Web.VirtualPath virtualPath) [0x00000] at System.Web.Compilation.BuildManager.GetCompiledType (System.String virtualPath) [0x00000] at System.Web.HttpApplicationFactory.InitType (System.Web.HttpContext context) [0x00000] Version information: Mono Version: 2.0.50727.42; ASP.NET Version: 2.0.50727.42 Apache version String: Apache/2.2.11 (Ubuntu) mod_mono/2.0 PHP/5.2.6-3ubuntu4.2 with Suhosin-Patch Server at dev Port 80 PS: I had to add three DLL's to the /bin directory in my application, copying them from Windows because I couldn't find them in any of Mono's packages. This might or might not be causing problems, I don't know. The list that I had to add is: System.Web.Abstractions System.Web.Routing System.Web.Mvc

  Read the article

• CSS gradient not rendering in Windows Phone 8 WebBrowser Control

  - by SRSHawk

  I am facing an issue where, the CSS3 background is not rendered in WebBrowser control in Windows Phone 8. But same HTML when opened in WebBrowser in Windows Phone 8, it renders the gradient The HTML I am using is: <html> <head> <meta name="viewport" content="width=320, user-scalable=no, minimum-scale=1, maximum-scale=1"/> </head> <body style="margin:0px;overflow:hidden;"> <div id="im_c" style="height:48px;width:100%25; background: -ms-linear-gradient( bottom, #432100 30%, #00AAAA 70%);"> <div style="margin:0 auto;width:320px;"> Test </div> </div> <style> body {margin:0px} </style> </body> In Windows Phone 8, I use the HTML as below: WebBroswer WebView = new WebBrowser(); WebView.Height = 100; WebView.Width = 400; WebView.NavigateToString(@"<html><head><meta name=""viewport"" content=""width=320, user-scalable=no, minimum-scale=1, maximum-scale=1""/></head><body style=""margin:0px;overflow:hidden;""> <div id=""im_c"" style=""height:48px;width:100%25; background: -ms-linear-gradient( bottom, #432100 30%, #00AAAA 70%);""> <div style=""margin:0 auto;width:320px;"">Test</div></div> <style> body {margin:0px} </style> </body></html>"); In this case, the CSS gradient is not visible. Am I missing something?

  Read the article

• Ubuntu Server 10.04 Heavy Network Traffic causes disconnect

  - by K Vaughan

  I'm currently running a headless Ubuntu 10.04 server. Installed is the LAMP stack, Joomla, Virtualbox, phpvirtualbox, webmin and proFTP.. It resolves the IP address so I can access it remotely (either the apache2 webserver or the FTP) using DDClient. Any packages installed have been installed using apt-get. Webmin, although discouraged in Ubuntu Server, is used mostly to administer the webserver aspect. This issue also appeared when I was using Ubuntu Server 10.10. After periods of heavy network traffic, whether local or remote, the connect drops. I'm talking specifically about the transfer of files via FTP, SCP or Samba (the latter of which I seldom use). There is no response to ping or ssh. I can't FTP to the server nor can I load the website. There are times when the server has been on for a few days and everything runs fine because I haven't accessed it much, if at all (thus not much network traffic). I've gone through a few hardware changes although I don't believe this has cause the issue: this has been happening long before I made any changes. At first I thought it was my ISP-provided router blocking traffic because of some kind of misconfiguration (perhaps assuming it was some kind of DoS attack). I've changed routers and still found no success. I've checked syslog, dmesg and kern.log for warnings but have uncovered none. I've ran memtest via the GRUB2 menu at boot and once it turned up 4 errors. I ran again with individual sticks of RAM in various slots and everything turned up fine. I've looked through the BIOS settings and everything looks fine. I've tried unplugging unnecessary pieces of hardware (other internal hard drives, CD drives, floppy, PCI cards, etc). Any help or tips on how I can even begin to troubleshoot this would be very much appreciated. Please note that i've only started playing with servers as a hobby so my knowledge wouldn't be the most refined. I'm comfortable with command line and have the initiative to know how to look up something I can't do. Unfortunately I can't seem to find any issues like this. Additionally: If a solution can't be found some assistance to write a script that will cause the server to reboot automatically if, after x minutes, it gets no response to pinging somewhere like google. Admittedly that's not the cleanest solution should my internet end up going down but I can't think of what else to do.

  Read the article

• DPM server 2010 Attach agent error : administrator privileges missing?

  - by Michael

  Hello, I’m hoping you would be able to help me out with this little problem I’m having. I installed DPM 2010 in our test environment to test backups on Exchange 2010 servers. The environment includes : 1xDC 2x Exchange Server 2010 1x DPM 2010 server All of these are running on Microsoft server 2008 R2 Virtual machines. The host machines are using Hyper-v. So the problem goes like this : 1- I tried to install the agents from the DPM server GUI, which failed saying I didn’t have the correct permissions. 2- So then I tried the manual installation using the commands from : the Microsoft site http://technet.microsoft.com/en-us/library/bb870935.aspx 3- The agent installation worked but when I get to attaching the agents to the DPM server it still gives me the error saying that the specified account does not have administrator rights. 4- I tried the Domain admin, users who are domain admin + local admin, single local admins. 5- I have turned off the windows firewall and made sure all the services are running. So now I’m out of ideas and really need help, the agent attach to the DPM server is the last thing that is holding me back from deploying everything to the production site. Any help would be really appreciated.

  Read the article

• tail -f and then exit on matching string

  - by Patrick

  I am trying to configure a startup script which will startup tomcat, monitor the catalina.out for the string "Server startup", and then run another process. I have been trying various combinations of tail -f with grep and awk, but haven't got anything working yet. The main issue I am having seems to be with forcing the tail to die after grep or awk have matched the string. I have simplified to the following test case. test.sh is listed below: #!/bin/sh rm -f child.out ./child.sh > child.out & tail -f child.out | grep -q B child.sh is listed below: #!/bin/sh echo A sleep 20 echo B echo C sleep 40 echo D The behavior I am seeing is that grep exits after 20 seconds , however the tail will take a further 40 seconds to die. I understand why this is happening - tail will only notice that the pipe is gone when it writes to it which only happens when data gets appended to the file. This is compounded by the fact that tail is to be buffering the data and outputting the B and C characters as a single write (I confirmed this by strace). I have attempted to fix that with solutions I found elsewhere, such as using unbuffer command, but that didn't help. Anybody got any ideas for how to get this working how I expect it? Or ideas for waiting for successful Tomcat start (thinking about waiting for a TCP port to know it has started, but suspect that will become more complex that what I am trying to do now). I have managed to get it working with awk doing a "killall tail" on match, but I am not happy with that solution. Note I am trying to get this to work on RHEL4.

  Read the article

• Nginx + uWSGI + Django performance stuck on 100rq/s

  - by dancio

  I have configured Nginx with uWSGI and Django on CentOS 6 x64 (3.06GHz i3 540, 4GB), which should easily handle 2500 rq/s but when I run ab test ( ab -n 1000 -c 100 ) performance stops at 92 - 100 rq/s. Nginx: user nginx; worker_processes 2; events { worker_connections 2048; use epoll; } uWSGI: Emperor /usr/sbin/uwsgi --master --no-orphans --pythonpath /var/python --emperor /var/python/*/uwsgi.ini [uwsgi] socket = 127.0.0.2:3031 master = true processes = 5 env = DJANGO_SETTINGS_MODULE=x.settings env = HTTPS=on module = django.core.handlers.wsgi:WSGIHandler() disable-logging = true catch-exceptions = false post-buffering = 8192 harakiri = 30 harakiri-verbose = true vacuum = true listen = 500 optimize = 2 sysclt changes: # Increase TCP max buffer size setable using setsockopt() net.ipv4.tcp_rmem = 4096 87380 8388608 net.ipv4.tcp_wmem = 4096 87380 8388608 net.core.rmem_max = 8388608 net.core.wmem_max = 8388608 net.core.netdev_max_backlog = 5000 net.ipv4.tcp_max_syn_backlog = 5000 net.ipv4.tcp_window_scaling = 1 net.core.somaxconn = 2048 # Avoid a smurf attack net.ipv4.icmp_echo_ignore_broadcasts = 1 # Optimization for port usefor LBs # Increase system file descriptor limit fs.file-max = 65535 I did sysctl -p to enable changes. Idle server info: top - 13:34:58 up 102 days, 18:35, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 118 total, 1 running, 117 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3983068k total, 2125088k used, 1857980k free, 262528k buffers Swap: 2104504k total, 0k used, 2104504k free, 606996k cached free -m total used free shared buffers cached Mem: 3889 2075 1814 0 256 592 -/+ buffers/cache: 1226 2663 Swap: 2055 0 2055 **During the test:** top - 13:45:21 up 102 days, 18:46, 1 user, load average: 3.73, 1.51, 0.58 Tasks: 122 total, 8 running, 114 sleeping, 0 stopped, 0 zombie Cpu(s): 93.5%us, 5.2%sy, 0.0%ni, 0.2%id, 0.0%wa, 0.1%hi, 1.1%si, 0.0%st Mem: 3983068k total, 2127564k used, 1855504k free, 262580k buffers Swap: 2104504k total, 0k used, 2104504k free, 608760k cached free -m total used free shared buffers cached Mem: 3889 2125 1763 0 256 595 -/+ buffers/cache: 1274 2615 Swap: 2055 0 2055 iotop 30141 be/4 nginx 0.00 B/s 7.78 K/s 0.00 % 0.00 % nginx: wo~er process Where is the bottleneck ? Or what am I doing wrong ?

  Read the article

• How to upload stuff to Amazon EC2 Windows instance?

  - by JohnIdol

  I've never used Amazon EC2 - I am thinking to test a few instances for running intensive computation processes I have a requirement for rather than buying real hardware. I am given to understand the thing is quite easy to setup - but I have no clue of how it actually works, in terms of transferring data to my ec2 instances. So the question is how can I upload stuff to my instance? Any help appreciated!

  Read the article

• Where can I buy a good rackmount workstation?

  - by yan bellavance

  We have a product which consists of a GUI program and all the hardware goes in a rack. Our department bought a rackmount server for the first unit, but I dont think this is adequate for applications that use graphics (correct me if I'm wrong - we bought a Dell R710). Could you tell me of a good rackmount workstation we could buy for our product? Also, would it be risky for us to build our own rackmount?

  Read the article

• Laptop Tracking System

  - by Guy Thomas

  Is there any software / hardware to track a laptop? Could you put something in your laptop that would identify it's location if a thief turned it on and connected to the internet?

  Read the article

< Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >