Search Results

Search found 13752 results on 551 pages for 'ip protocol'.

Page 475/551 | < Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >

• Win Server 2k and Win 7 client

  - by Ray Kruse

  I have a Win Server 2000 system with AD configured. The network consists of an OKI printer, a network server, a wifi router a Win 2k client and the server. I'm trying to connect a Win 7 client. The purpose of the network, besides sharing equipment is to move files from client to client and scatter backups over more than 1 machine. The Win 7 client is configured for DHCP and does in fact receive it's IP and DNS configuration from the server and it sees the printer, wifi router and network drive, but does not see the Win 2k client nor the Win 2k server. I have tried the LAN Management Authentication Level set to 'Send LM & NTLM responses' with the 128 bit encryption removed. I've also done the registry hack on the key 'LmCompatibilityLevel'. Neither of these have helped. I have two questions: Is there a fix or is Win 2k totally incompatible? Is the best (or quickest/cheapest) fix to upgrade the server to Win 2k3 and not worry about the Win 2k client? Thanks for any help. Ray Kruse Buffalo, KY

  Read the article

• svn using nginx Commit failed: path not found

  - by Alaa Alomari

  I have built svn server on my nginx webserver. my nginx configuration is server { listen 80; server_name svn.mysite.com; location / { access_log off; proxy_pass http://svn.mysite.com:81; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi_params; } } Now, i can svn co and svn up normally without having any problem and when i try to commit i get error: $svn up At revision 1285. $ svn info Path: . URL: http://svn.mysite.com/elpis-repo/crons Repository Root: http://svn.mysite.com/elpis-repo Repository UUID: 5303c0ba-bda0-4e3c-91d8-7dab350363a1 Revision: 1285 Node Kind: directory Schedule: normal Last Changed Author: alaa Last Changed Rev: 1280 Last Changed Date: 2012-04-29 10:18:34 +0300 (Sun, 29 Apr 2012) $svn st M config.php $svn ci -m "Just a test, add blank line to config" config.php Sending config.php svn: Commit failed (details follow): svn: File 'config.php' is out of date svn: '/elpis-repo/!svn/bc/1285/crons/config.php' path not found if i try to svn co on port 81 (my proxy_pass which is apache) and then svn ci, it will work smoothly! but why it doesn't work when i use nginx to accomplish it? any idea is highly appreciated.

  Read the article

• What's the difference between Host and HostName in SSH Config?

  - by Bill Jobs

  The man page says this: Host Host Restricts the following declarations (up to the next Host keyword) to be only for those hosts that match one of the patterns given after the keyword. If more than one pattern is provided, they should be separated by whitespace. A single `*' as a pattern can be used to provide global defaults for all hosts. The host is the hostname argument given on the command line (i.e. the name is not converted to a canonicalized host name before matching). A pattern entry may be negated by prefixing it with an exclamation mark (`!'). If a negated entry is matched, then the Host entry is ignored, regardless of whether any other patterns on the line match. Negated matches are therefore useful to provide exceptions for wildcard matches. See PATTERNS for more information on patterns. HostName HostName Specifies the real host name to log into. This can be used to specify nicknames or abbreviations for hosts. If the hostname contains the character sequence `%h', then this will be replaced with the host name specified on the command line (this is useful for manipulating unqualified names). The default is the name given on the com- mand line. Numeric IP addresses are also permitted (both on the command line and in HostName specifications). For example, when I want to create an SSH Config for GitHub, what should Host and HostName be respectively?

  Read the article

• nginx reverse ssl proxy with multiple subdomains

  - by BrianM

  I'm trying to locate a high level configuration example for my current situation. We have a wildcard SSL certificate for multiple subdomains which are on several internal IIS servers. site1.example.com (X.X.X.194) -> IISServer01:8081 site2.example.com (X.X.X.194) -> IISServer01:8082 site3.example.com (X.X.X.194) -> IISServer02:8083 I am looking to handle the incoming SSL traffic through one server entry and then pass on the specific domain to the internal IIS application. It seems I have 2 options: Code a location section for each subdomain (seems messy from the examples I have found) Forward the unencrypted traffic back to the same nginx server configured with different server entries for each subdomain hostname. (At least this appears to be an option). My ultimate goal is to consolidate much of our SSL traffic to go through nginx so we can use HAProxy to load balance servers. Will approach #2 work within nginx if I properly setup the proxy_set_header entries? I envision something along the lines of this within my final config file (using approach #2): server { listen Y.Y.Y.174:443; #Internally routed IP address server_name *.example.com; proxy_pass http://Y.Y.Y.174:8081; } server { listen Y.Y.Y.174:8081; server_name site1.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer01:8081; } server { listen Y.Y.Y.174:8081; server_name site2.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer01:8082; } server { listen Y.Y.Y.174:8081; server_name site3.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer02:8083; } This seems like a way, but I'm not sure if it's the best way. Am I missing a simpler approach to this?

  Read the article

• Advice needed for a home network setup (hardware & software) to handle many clients and potentially heavy traffic

  - by posdef

  I have recently decided to re-structure the home network of our flatshare here. Here's a quick outline of the situation. I envision to have the following 4 devices connected to the router via cable: Xbox 360 IP phone Printer QNAP server (Web, File and Multimedia) We are three people living here, so on top of that there will be to 5-6 computers/mobile devices connecting as wireless clients. My goal is to be able to transfer files (when needed) between the computer and the Multimedia server, which I can reach via 360 and play on the TV. I also would like to keep a high level of security; right now I have the encryption on WPA2 and MAC filtering. I don't believe the web server will get heavy traffic, though I would like to have it responsive. Likewise, I don't have a habit of downloading via torrent etc, but I greatly appreciate my network being responsive and fast, especially when I am browsing or streaming high quality media. Now my questions are: is this setup feasible? smart? efficient? can this be improved somehow? my current router (D-Link DI624) and the previous one (DI-524) used to have spontaneous drops in network, which I find highly irritating. I don't believe in my router, especially now that it completely crashed when I was test-running the setup by transferring a large media file to server while xbox was playing music from the server, and two computers browsing the net. Do I need to get new hardware, if so, any recommendations for a reliable and fast router?

  Read the article

• Sharing two SSL wildcard certificates in memory in nginx

  - by hvtilborg

  I have an nginx server running with two IP addresses, say 1.2.3.4 and 4.3.2.1. Besides there are two wildcard SSL certificates for *.example.net (i.e. wc1, pointing to 1.2.3.4) and *.sub.example.net (i.e. wc2, pointing to 4.3.2.1). The nginx docs mention that you can share a wildcard certificate between server instances like this: ssl_certificate wc1.crt; ssl_certificate_key wc1.key; server { listen 1.2.3.4:443; server_name www.example.net; ssl on; ... } server { listen 1.2.3.4:443; server_name test.example.net; ssl on; ... } However, I was wondering whether this same construct is possible to use with the second wildcard certificate too. Both domains have around 500 subdomains. Do they not get mixed up, since the ssl_certificate construct is now global?

  Read the article

• Esx servers in a DMZ

  - by James

  I have two ESX 3.5 servers in a DMZ. I can access these servers on any port from my lan via a VPN. Servers in the DMZ are unable to initiate connections back to the lan, for obvious reasons. I have a vCenter server on my lan and can initially connect to the esx servers fine. However the esx servers then try to send a hearth beat back to the vCenter server on udp/902 obviously this will not get back to the vCenter server, which then marks the ESX servers as not responding and disconnects. There are two broad solutions I can think of; 1) Try to tell vCenter to ignore not getting heart beats. The best I can do here is delay the disconnect by 3 mins. 2) Try some clever network solution. However again I am at loss. Note: The vCenter server is on a lan, and cannot be given a public IP, so firewall rules back will not work. And also I cannot setup a VPN from the DMZ to the lan. **I am adding the following, explanation that I added to the comments Ok maybe this is the bit that I not explaining well. The DMZ is on a remote site, an entirely independent network (network 1). The vCenter server is on our office lan (network 2). Network 2 can connect to any machine on any port on network 1. But network 1 is not allowed to initiate a connection to network 2. Any traffic destined to network 2 from network 1 gets dropped by the firewall as it is traffic to a non-routable address. The only solution I can think of is setting up a VPN from network 1 to network 2, but this is not acceptable So any clever folk out there any ideas? J

  Read the article

• IIS running but not serving content

  - by Kyle

  I have an internal dev server running Windows 2k8 R2 with the Web and FTP Server roles set up which won't serve any content at all. Trying to connect from another host via telnet yields 'connection failed': c:\>telnet devserver 80 Connecting To devserver...Could not open connection to the host, on port 80: Conn ect failed Using netstat -an | find "80" on the dev server returns no connections on port 80 (a few on 1801, etc) tcpview confirms this, listing no open connections on port 80. The following services related to the Web role are running: World Wide Web Publishing Service Application Host Helper Service Microsoft FTP Service (ftp connections to port 21 are granted) Windows Process Activation Service The default website bindings are: Type Host Name Port IP Address Binding Information http 80 * net.tcp 808:* net.pipe * net.msmq localhost msmq.formatname localhost When setting up a new application under the default site, the test function passes both connection/authorisation only if the 'connect as' user is local admin, otherwise the test errors with 'invalid application path'. At no point is the W3SVC service PID bound to port 80 (it is running and bound to 21 for ftp). There are no W3SVC log directory at c:\inetpub\logs\LogFiles\ (only FTPSVC2), and no HTTPERR directory at c:\windows\system32\ or c:\windows\system32\logfiles\. There do not appear to be any related errors in the event logs. I'd really appreciate any thoughts on be a good place dig into what's (not) going on here!

  Read the article

• Is there a way to force spam-filter to change their policy or remove them as recognized spam service?

  - by Alvin Caseria

  As per mxtoolbox I got 1 blacklist still active for quite sometime now. UCEPROTECTL1's is running on 7 day policy since last spam mail. This is too strict compared to the 98 other spam filters out there as per mxtoolbox. (Or at least to the other 4 that detected the problem) I have no problem with our e-mail since it is hosted locally. But our domain is hosted outside the country and it run on a different IP. I contacted them but since it is the spam-filter's rule, there's nothing to be done but wait. I do believe services like spam-filters should at lease be bounded by guidelines and standards for this matter. Otherwise problem on delivering valid (after the fix) e-mails will be disastrous. Is there a way to force UCEPROTECT to change their policy or remove them as recognized spam service? Apart from contacting them in case they do not answer. Currently they are charging for fast removal if you pay by PayPal. I'm still looking for guideline/standard on how they should operate regarding this matter. Appreciate the help.

  Read the article

• Kerberos & localhost

  - by Alex Leach

  I've got a Kerberos v5 server set up on a Linux machine, and it's working very well when connecting to other hosts (using samba, ldap or ssh), for which there are principals in my kerberos database. Can I use kerberos to authenticate against localhost though? And if I can, are there reasons why I shouldn't? I haven't made a kerberos principal for localhost. I don't think I should; instead I think the principal should resolve to the machine's full hostname. Is that possible? I'd ideally like a way to configure this on just one server (whether kerberos, DNS, or ssh), but if each machine needs some custom configuration, that'd work too. e.g $ ssh -v localhost ... debug1: Unspecified GSS failure. Minor code may provide more information Server host/[email protected] not found in Kerberos database ... EDIT: So I had a bad /etc/hosts file. If I remember correctly, the original version I got with Ubuntu had two 127.0. IP addresses, something like:- 127.0.0.1 localhost 127.0.*1*.1 hostname For no good reason, I'd changed mine a long time ago to: 127.0.0.1 localhost 127.0.*0*.1 hostname.example.com hostname This seemed to work fine with everything until I tried out ssh with kerberos (a recent endeavour). Somehow this configuration led to sshd resolving the machine's kerberos principal to "host/localhost@\n", which I suppose makes sense if it uses /etc/hosts for forward and reverse dns lookups in preference to external dns. So I commented out the latter line, and sshd magically started authenticating with gssapi-with-mic. Awesome. (Then I investigated localhost and asked the question)

  Read the article

• Apache2, Tomcat6, and proxy redirects

  - by Randal Hale

  So here is my question - go easy and slow. I'm a GIS Consultant and general hack with linux. I inherited this volunteer job essentially because I knew more than the rest of the team - or the rest of the team isn't as stubborn as I am... With that said a number of people have been mucking around in the server before I got involved so I've been cleaning up a lot of things. The domain names have been changed to protect the innocent. I have a server running Apache2 (port 80) and tomcat6 (8080) running on ubuntu server 10.4. There is a virtual host on Apache2 called "Runner" (the domain is runner.org). I have mod_proxy loaded. I am trying to redirect everyone that visits runner.org to http://some.ip.address:8080/openrunner-webapp/ So far I've gotten runner.org assigned to the apache2 server. Someone set up a redirect in the httpd.conf file but I believe it needs to go into the virtualhost. I tried setting the redirect in the virtualhost as: *ProxyPass / http://localhost:8080/openrunner-webapp All that does is show me the root of the Apache webserver. Anyway I'm stuck

  Read the article

• Possible DNS issue?

  - by durilai

  I am having an issue, which I think stems from DNS. I have 2 servers. Server 1 is AD server with DNS, which was automatically configured when installing AD. The second server is a web server that is part of the domain, but it is not AD nor any other role. I can remote desktop in from server 1 using internal IP address, but when I attempt to connect from any other computer it fails, the computer can connect to server 1. I am able to ping both servers, as well as nslookup both using their FQDN. I am also able to telnet to port 3389. Any help is appreciated UPDATE I do not think it is DNS anymore, but not sure what it is. The remote desktop connects and I get to the login prompt, but when I start to enter credentials it disconnects. I then am unable to reconnect. If I wait for about 10 minutes it will allow me to repeat, but with the same results. UGH!!!

  Read the article

• BGP path prepended route not listed anywhere

  - by Julien Vehent

  We have a simple multi-homed setup with two routers that advertise our AS to two ISP. The second ISP (ISP B) is only used for backup when ISP A goes down, so we prepended our AS 3 times on this route. I spend a couple of hours this morning poking at looking glass routers all over the internet, and none of them list our backup route with the prepended path. I checked the south african internet exchange, the london internet exchange, oregon internet exchange and a couple dozen ISPs. All of them have multiples routes through ISP A, often with 3 or 4 hops. The route through ISP B should, at least, appear somewhere and have 5 or 6 hops. But I couldn't find it anywhere. (I checked the full bgp tables on the looking glass routers, using show ip bgp 65000) My questions are: Is there a limit to the size of a route after which most routers will simply discard the route ? Is our backup route even going to work when ISP A goes down, if no router knows about it ? Our two routers are connected on iBGP. Would it be possible that the route through ISPB is not announced because the iBGP session prefers the route through ISPA ? This is what non-exist-map and advertise-map are supposed to do, but none of those are used in either routers.

  Read the article

• wrt54gl reboots; troubleshooting steps?

  - by Bill

  I am using about 10 wrt54gl's in a small school. I am using a combination of stock firmware and Tomato 1.25, slowly moving towards all Tomato. We have had these devices installed for several years without problems. Recently, more and more of the units have started to spontaneously reboot, usually during high-traffic times (but not always). For the most part, the rebooting is not critical for us, but the wrt54gl's temporarily revert to 192.168.1.1 on the LAN ethernet ports and conflict with a critical server that's already installed with that IP. (Yes -- we plan to move the server off that address, but it is an involved process.) Both Tomato and the stock firmware (several versions from recent to several years old) exhibit the same problem: random reboots and reverting to 192.168.1.1 and conflicting temporarily with our server until the firmware boot process finishes. Here are my questions: Any way to prevent the wrt54gl's from reverting to 192.168.1.1 during the boot process? I was thinking of doing a custom firmware mod, although I hate to go that direction. Any steps to take in troubleshooting the reboots? Only some of the wrt54gl's reboot, which is odd. Others stay online for weeks and months without issues. Thanks.

  Read the article

• Window 7 image in vmware will allow network connection out but not http

  - by Ormis

  I am currently trying to create a set of images to deploy on my network, but I've run in to a snag. When I create my own Windows 7 image I can successfully use NAT for connecting to the network but whenever I try to access a webpage I get nothing. To be more specific, All firewalls/iptables are disabled on my host machine, my virtual machine, and my network. I can do lookups and all addresses respond correctly (i'm even using Google's DNS). On the host OS i have full connectivity. On the virtual machine I can ping any device I want and all addresses resolve correctly. Within a browser I cannot reach any page via hostname or IP. I feel almost like port 80 is being blocked but i can't find any reason this would be the case. If anyone has had this occur before, I would love some insight to the problem. I understand this question is a bit out of the norm for stackoverflow, but I've run out of ideas. Thank you for any help you can provide.

  Read the article

• Weird connectivity issue wtih USB Wifi stick.

  - by Carlos Nunez

  Hi, all! I'm not sure if this is the appropriate place to throw this question out there, but I'll give it a shot. I'm setting up two PCs, and I've been having massive troubles getting a USB wireless dongle working. I have two Sony VAIOs (Windows XP, SP2) that I found second-hand, and since they will be in a location too far to connect by Ethernet (no, can't do patch panels here :p), I need to connect them by wireless. Easiest and cheapest way to do that at the moment is by using two USB wireless sticks that I've had for a while, but never used. One of the computers is using a SMC-manufactured card, whereas the other is using a Belkin F5D7050. The box with the SMC card can see and authenticate with my router just fine, and has no problem obtaining a DHCP lease. The box with the Belkin, on the other hand, isn't so lucky. While it can see my router and associate with it, it will not obtain a DHCP-issued address. Worse, when I assign a static IP address to the NIC, it can ping the entire network and access the internet (meaning it can authenticate with the router), but no computer can ping to it UNLESS that computer pinged the computer that's pinging it first. Confused? Well, so am I. Has anyone had this issue before? Is this just a sign of a bad card? (For the moment, I have it connected by Ethernet, as I haven't moved it yet. However, this will be a problem when I set it up in its new home later.) Thanks! -Carlos Nunez

  Read the article

• Setting Up Apache as a Forward Proxy with Cahcing

  - by Karl

  I am trying to set up Apache as a forward proxy with caching, but it does not seem to be working correctly. Getting Apache working as a forward proxy was no problem, but no matter what I do it is not caching anything, to disk or memory. I already checked to make sure nothing is conflicting in the mods_enabled directory with mod_cache (ended up commenting it all out) and also I tried moving all of the caching related fields to the configuration file for mod_cache. In addition I set up logging for caching requests, but nothing is being written to those logs. Below is my Apache config, any help would be greatly appreciated!! <VIRTUALHOST *:8080> ProxyRequests On ProxyVia On #ErrorLog "/var/log/apache2/proxy-error.log" #CustomLog "/var/log/apache2/proxy-access.log" common CustomLog "/var/log/apache2/cached-requests.log" common env=cache-hit CustomLog "/var/log/apache2/uncached-requests.log" common env=cache-miss CustomLog "/var/log/apache2/revalidated-requests.log" common env=cache-revalidate CustomLog "/var/log/apache2/invalidated-requests.log" common env=cache-invalidate LogFormat "%{cache-status}e ..." # This path must be the same as the one in /etc/default/apache2 CacheRoot /var/cache/apache2/mod_disk_cache # This will also cache local documents. It usually makes more sense to # put this into the configuration for just one virtual host. CacheEnable disk / #CacheHeader on CacheDirLevels 3 CacheDirLength 5 ##<IfModule mod_mem_cache.c> # CacheEnable mem / # MCacheSize 4096 # MCacheMaxObjectCount 100 # MCacheMinObjectSize 1 # MCacheMaxObjectSize 2048 #</IfModule> <Proxy *> Order deny,allow Deny from all Allow from x.x.x.x #IP above hidden for this post <filesMatch "\.(xml|txt|html|js|css)$"> ExpiresDefault A7200 Header append Cache-Control "proxy-revalidate" </filesMatch> </Proxy> </VIRTUALHOST> Thank you once again!

  Read the article

• 1 document pending in printer queue in System Tray that won't go away

  - by White Phoenix

  Edit: I didn't want to do it, but I restarted my computer - cleared the problem right away. Though if I were running a Windows 2003/2008 server, I would hate to have to restart the domain controller just to get rid of this irritating problem. If I run into this problem again, I'm going to try that remove printer/reinstall printer thing. Thanks for your help @Psychogeek. Points for your attempt. Running Windows 7, 32-bit Professional. My printer is an HP OfficeJet Wireless 8500. It's connected to my network wirelessly through TCP/IP as a standalone device. I was having some print problems awhile back and had to do some print spooler stuff as part of my troubleshooting (stopping the Print Spooler service, clearing the print spooler files from C:\Windows\System32\spool\PRINTERS and then restarting the service). I've finally narrowed it down to it being application specific, so that's that. However, as a leftover from all that troubleshooting, my printer icon is stuck in the tray - when I mouseover the icon, Windows says that there is 1 document(s) pending for my username. However, when I open up that printer's queue, there's nothing in there. I restarted the Printer Spooler service and also checked C:\Windows\System32\spool\PRINTERS if there's anything in there - nothing. I did a quick Google search and an answer from one of those "reps" at the Microsoft Socialnet site says for me to uninstall and reinstall the printer. The funny thing is, when I send print jobs, they print just fine - that 1 mystery document stuck in queue isn't stopping anything from happening. Short of having to do that, are there any other quick troubleshooting steps I may be missing?

  Read the article

• Vyatta masquerade out bridge interface

  - by miquella

  We have set up a Vyatta Core 6.1 gateway on our network with three interfaces: eth0 - 1.1.1.1 - public gateway/router IP (to public upstream router) eth1 - 2.2.2.1/24 - public subnet (connected to a second firewall 2.2.2.2) eth2 - 10.10.0.1/24 - private subnet Our ISP provided the 1.1.1.1 address for us to use as our gateway. The 2.2.2.1 address is so the other firewall (2.2.2.2) can communicate to this gateway which then routes the traffic out through the eth0 interface. Here is our current configuration: interfaces { bridge br100 { address 2.2.2.1/24 } ethernet eth0 { address 1.1.1.1/30 vif 100 { bridge-group { bridge br100 } } } ethernet eth1 { bridge-group { bridge br100 } } ethernet eth2 { address 10.10.0.1/24 } loopback lo { } } service { nat { rule 100 { outbound-interface eth0 source { address 10.10.0.1/24 } type masquerade } } } With this configuration, it routes everything, but the source address after masquerading is 1.1.1.1, which is correct, because that's the interface it's bound to. But because of some of our requirements here, we need it to source from the 2.2.2.1 address instead (what's the point of paying for a class C public subnet if the only address we can send from is our gateway!?). I've tried binding to br100 instead of eth0, but it doesn't seem to route anything if I do that. I imagine I'm just missing something simple. Any thoughts?

  Read the article

• Limit bandwith on network of computers

  - by Joseph34123

  We have network in office of approximately 10 computers sometimes when someone downloads something for work (e.g. syncing email with an attachment or Dropbox), everyone slows down. I could limit each computer in office but the problem is that we have an open WiFi network, and I cannot access the computers that use it. We have one main DSL router "Netopia 3347" and another router connected to it on wire for public wifi is "Linksys WRT110". I cannot change the setup we have and don't want to. There's 2 approaches here: Set office computers download limit in each computer and then I need to find out how I can set a download limit for the wifi network such as in the router settings. It's a Linksys router and I did not see the option for this, so maybe I need new router for WiFi? Don't bother with each computer and put some "specific hardware" or another computer before router so all traffic goes trough it and I can then assign priority maximum speed for each IP address. Question is what hardware do I need?

  Read the article

• Apache Reverse proxy for intranet and other integrated application on intranet

  - by user1433448

  I'm trying to configure a reverse proxy (ssl) with apache 2.2 in Debian Squeeze, but I have some problems, specially with some path absolute and with https I'll try to detail what I have made and what I'm trying to configure I have a server Debian Squeeze with apache2.2 + mod_proxy_html with: # apt-get install libapache2-mod-proxy-html libxml2-dev # a2enmod proxy # a2enmod proxy_http # a2enmod proxy_html # a2enmod headers After that I have configured a virtual host with: reverse_proxy_ssl.conf I'm trying to configure to allow access of our intranet from internet with a reverse proxy (apache that is located in DMZ). With this configuration domain.com/intranet works correctly and we can access to intranet, but we have one problem when from domain.com/intranet we need to use another internal application that is called from intranet with absolute path ( https://192.168.10.25/application/) and from internet appears that try to access with internal ip, and this link es incorrect from external site We only need to access from intranet to multiple internal application that are in external server and we like to restrict to minimal access from internet. All the application that are in the smae server of intranet are working. The second problem is with https and reverse proxy in our firewall appears some errors with packets (not valid packets), and with https seems to work. What can I do to solve this problems (absolute path and ssl problem) Thanks

  Read the article

• can't figure out why apache LDAP auth fails

  - by SethG

  Suddenly, yesterday, one of my apache servers became unable to connect to my LDAP (AD) server. I have two sites running on that server, both of which use LDAP to auth against my AD server when a user logs in to either site. It had been working fine two days ago. For reasons unknown, as of yesterday, it stopped working. The error log only says this: auth_ldap authenticate: user foo authentication failed; URI /FrontPage [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server], referer: http://mysite.com/ I thought perhaps my self-signed SSL cert had expired, so I created a new one for mysite.com, but not for the server hostname itself, and the problem persisted. I enabled debug-level logging. It shows the full SSL transaction with the LDAP server, and it appears to complete without errors until the very end when I get the "Can't contact LDAP server" message. I can run ldapsearch from the commandline on this server, and I can login to it, which also uses LDAP, so I know that the server can connect to and query the LDAP/AD server. It is only apache that cannot connect. Googling for an answer has turned up nothing, so I'm asking here. Can anybody provide insight to this problem? Here's the LDAP section from the apache config: <Directory "/web/wiki/"> Order allow,deny Allow from all AuthType Basic AuthName "Login" AuthBasicProvider ldap AuthzLDAPAuthoritative off #AuthBasicAuthoritative off AuthLDAPUrl ldaps://domain.server.ip/dc=full,dc=context,dc=server,dc=name?sAMAccountName?sub AuthLDAPBindDN cn=ldapbinduser,cn=Users,dc=full,dc=context,dc=server,dc=name AuthLDAPBindPassword password require valid-user </Directory>

  Read the article

• Nexus functionality is limited after installation

  - by Dmitriy Sukharev

  I have a CentOS based server with Sonatype Nexus 2.0.4-1 installed. The issue is that there are no standard "Artifact Search", "Advanced Search", "Browse Index", "Refresh Index" Nexus features, as well as Artifact Information tab after selection of any artifact (only Maven Information tab). I tried to Google, but was amazed that there're no information about this issue. Actually it looks like all actions I've done are: wget http://www.sonatype.org/downloads/nexus-2.0.4-1-bundle.tar.gz tar -xvf nexus-2.0.4-1-bundle.tar.gz cp -r nexus-2.0.4-1 sonatype-work /opt/ ln -s /opt/nexus-2.0.4-1/* /opt/nexus ln /opt/nexus/bin/nexus /etc/init.d/ chmod 755 /etc/init.d/nexus vim /etc/init.d/nexus NEXUS_HOME=“/opt/nexus” RUN_AS_USER=“nexus” useradd -s /sbin/nologin -d /var/lib/nexus nexus chown -R nexus /opt/nexus/ chown -R nexus /opt/nexus-2.0.4-1/ sudo -u nexus cp /opt/nexus/conf/examples/proxy-https/jetty.xml /opt/nexus/conf/ To force Nexus be available through HTTPS I went to Administration - Server - Application Server Settings as admin and changed Base URL to https:// external IP/nexus and set Force Base URL to true. Any ideas how to get missed Nexus features?

  Read the article

• Nginx proxy domain to another domain with no change URL

  - by Evgeniy

  My question is in the subj. I have a one domain, that's nginx's config of it: server { listen 80; server_name connect3.domain.ru www.connect3.domain.ru; access_log /var/log/nginx/connect3.domain.ru.access.log; error_log /var/log/nginx/connect3.domain.ru.error.log; root /home/httpd/vhosts/html; index index.html index.htm index.php; location ~* \.(avi|bin|bmp|css|dmg|doc|docx|dpkg|exe|flv|gif|htm|html|ico|ics|img|jpeg|jpg|js|m2a|m2v|mov|mp3|mp4|mpeg|mpg|msi|pdf|pkg|png|pps|ppt|pptx|ps|rar|rss|rtf|swf|tif|tiff|txt|wmv|xhtml|xls|xml|zip)$ { root /home/httpd/vhosts/html; access_log off; expires 1d; } location ~ /\.(git|ht|svn) { deny all; } location / { #rewrite ^ http://connect2.domain.ru/; proxy_pass http://127.0.0.1:8080/; proxy_redirect off; proxy_hide_header "Cache-Control"; add_header Cache-Control "no-store, no-cache, must-revalidate, post-check=0, pre-check=0"; proxy_hide_header "Pragma"; add_header Pragma "no-cache"; expires -1; add_header Last-Modified $sent_http_Expires; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } I need to proxy connect3.domain.ru host to connect2.domain.ru, but with no URL changed in browser's address bars. My commented out rewrite line could solve this problem, but it's just a rewrite, so I cannot stay with the same URL. I know that this question is easy, but please help. Thank you.

  Read the article

• How to set up QoS on ADSL router (terracom) for prioritizing browsing

  - by DBZ_A

  I want to configure the ADSL router which connects 10+ machines to the internet. I want to give maximum priority to browsing (ports 80,443) and set low priority for bittorrent etc.(port 42180) I have been experimenting with settings , but with no luck. There are three settings which confuse me, along with my understanding. 802.1 Priority - Related to LAN level, possible values 0-7 , higher numbers means higher priority. 'Mark traffic priority' - clueless about this. IPP/DS - IP Precedence - possible values 0-7 ; 6 & 7 are reserved, so set 5 for highest priority. Or when using DSCP - set 46 for highest priority. Please help me in getting this done... Similer question for another model of router here , but with less number of confusing options :) How to configure QoS on home router Update: from discussion on another thread, QoS can control only upstream traffic (from router to the internet) , while this may in turn affect downstream traffic rate, there is no direct control over data coming into the router.

  Read the article

< Previous Page | 471 472 473 474 475 476 477 478 479 480 481 482  | Next Page >