Search Results

Search found 13927 results on 558 pages for 'programming theory'.

Page 476/558 | < Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >

  • SQL SERVER – Automation Process Good or Ugly

    - by pinaldave
    This blog post is written in response to T-SQL Tuesday hosted by SQL Server Insane Asylum. The idea of this post really caught my attention. Automation – something getting itself done after the initial programming, is my understanding of the subject. The very next thought was – is it good or evil? The reality is there is no right answer. However, what if we quickly note a few things, then I would like to request your help to complete this post. We will start with the positive parts in SQL Server where automation happens. The Good If I start thinking of SQL Server and Automation the very first thing that comes to my mind is SQL Agent, which runs various jobs. Once I configure any task or job, it runs fine (till something goes wrong!). Well, automation has its own advantages. We all have used SQL Agent for so many things – backup, various validation jobs, maintenance jobs and numerous other things. What other kinds of automation tasks do you run in your database server? The Ugly This part is very interesting, because it can get really ugly(!). During my career I have found so many bad automation agent jobs. Client had an agent job where he was dropping the clean buffers every hour Client using database mail to send regular emails instead of necessary alert related emails The best one – A client used new Missing Index and Unused Index scripts in SQL Agent Job to follow suggestions 100%. Believe me, I have never seen such a badly performing and hard to optimize database. (I ended up dropping all non-clustered indexes on the development server and ran production workload on the development server again, then configured with optimal indexes). Shrinking database is performance killer. It should never be automated. SQL SERVER – Shrinking Database is Bad – Increases Fragmentation – Reduces Performance The one I hate the most is AutoShrink Database. It has given me hard time in my career quite a few times. SQL SERVER – SHRINKDATABASE For Every Database in the SQL Server Automation is necessary but common sense is a must when creating automation. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

    Read the article

  • Multi-Threaded Application vs. Single Threaded Application

    Why would we use a multi threaded application vs. a single threaded application? First we must define multithreading. Multithreading is a feature of an operating system that allows programs to run subcomponents or threads in parallel. Typically most applications only need to use one thread because they do not perform time consuming tasks. The use of multiple threads allows an application to distribute long running tasks so that they can be executed in parallel. This gives the user the perceived appearance that the application is working faster due to the fact that while one thread is waiting on an IO process the remaining tasks can make use of the available CPU. The allows working threads to execute in tandem so that they can be competed sooner. Multithreading Benefits Improved responsiveness — Users usually report improved responsiveness compared to single thread applications. Faster applications — Multiple threads can lead to improved application performance. Prioritization — Threads can be assigned a priority which would allow higher priority tasks to take precedence over lower priority tasks. Single Threading Benefits Programming and debugging —These activities are easier compared to multithreaded applications due to the reduced complexity Less Overhead — Threads add overhead to an application When developing multi-threaded applications, the following must be considered. Deadlocks occur when two threads hold a monitor that the other one requires. In essence each task is blocking the other and both tasks are waiting for the other monitor to be released. This forces an application to hang or deadlock. Resource allocation is used to prevent deadlocks because the system determines if approving the resource request will render the system in an unsafe state. An unsafe state could result in a deadlock. The system only approves requests that will lead to safe states. Thread Synchronization is used when multiple threads use the same instance of an object. The threads accessing the object can then be locked and then synchronized so that each task can interact with the static object on at a time.

    Read the article

  • Robotic Arm &ndash; Hardware

    - by Szymon Kobalczyk
    This is first in series of articles about project I've been building  in my spare time since last Summer. Actually it all began when I was researching a topic of modeling human motion kinematics in order to create gesture recognition library for Kinect. This ties heavily into motion theory of robotic manipulators so I also glanced at some designs of robotic arms. Somehow I stumbled upon this cool looking open source robotic arm: It was featured on Thingiverse and published by user jjshortcut (Jan-Jaap). Since for some time I got hooked on toying with microcontrollers, robots and other electronics, I decided to give it a try and build it myself. In this post I will describe the hardware build of the arm and in later posts I will be writing about the software to control it. Another reason to build the arm myself was the cost factor. Even small commercial robotic arms are quite expensive – products from Lynxmotion and Dagu look great but both cost around USD $300 (actually there is one cheap arm available but it looks more like a toy to me). In comparison this design is quite cheap. It uses seven hobby grade servos and even the cheapest ones should work fine. The structure is build from a set of laser cut parts connected with few metal spacers (15mm and 47mm) and lots of M3 screws. Other than that you’d only need a microcontroller board to drive the servos. So in total it comes a lot cheaper to build it yourself than buy an of the shelf robotic arm. Oh, and if you don’t like this one there are few more robotic arm projects at Thingiverse (including one by oomlout). Laser cut parts Some time ago I’ve build another robot using laser cut parts so I knew the process already. You can grab the design files in both DXF and EPS format from Thingiverse, and there are also 3D models of each part in STL. Actually the design is split into a second project for the mini servo gripper (there is also a standard servo version available but it won’t fit this arm).  I wanted to make some small adjustments, layout, and add measurements to the parts before sending it for cutting. I’ve looked at some free 2D CAD programs, and finally did all this work using QCad 3 Beta with worked great for me (I also tried LibreCAD but it didn’t work that well). All parts are cut from 4 mm thick material. Because I was worried that acrylic is too fragile and might break, I also ordered another set cut from plywood. In the end I build it from plywood because it was easier to glue (I was told acrylic requires a special glue). Btw. I found a great laser cutter service in Kraków and highly recommend it (www.ebbox.com.pl). It cost me only USD $26 for both sets ($16 acrylic + $10 plywood). Metal parts I bought all the M3 screws and nuts at local hardware store. Make sure to look for nylon lock (nyloc) nuts for the gripper because otherwise it unscrews and comes apart quickly. I couldn’t find local store with metal spacers and had to order them online (you’d need 11 x 47mm and 3 x 15mm). I think I paid less than USD $10 for all metal parts. Servos This arm uses five standards size servos to drive the arm itself, and two micro servos are used on the gripper. Author of the project used Modelcraft RS-2 Servo and Modelcraft ES-05 HT Servo. I had two Futaba S3001 servos laying around, and ordered additional TowerPro SG-5010 standard size servos and TowerPro SG90 micro servos. However it turned out that the SG90 won’t fit in the gripper so I had to replace it with a slightly smaller E-Sky EK2-0508 micro servo. Later it also turned out that Futaba servos make some strange noise while working so I swapped one with TowerPro SG-5010 which has higher torque (8kg / cm). I’ve also bought three servo extension cables. All servos cost me USD $45. Assembly The build process is not difficult but you need to think carefully about order of assembling it. You can do the base and upper arm first. Because two servos in the base are close together you need to put first with one piece of lower arm already connected before you put the second servo. Then you connect the upper arm and finally put the second piece of lower arm to hold it together. Gripper and base require some gluing so think it through too. Make sure to look closely at all the photos on Thingiverse (also other people copies) and read additional posts on jjshortcust’s blog: My mini servo grippers and completed robotic arm  Multiply the robotic arm and electronics Here is also Rob’s copy cut from aluminum My assembled arm looks like this – I think it turned out really nice: Servo controller board The last piece of hardware I needed was an electronic board that would take command from PC and drive all seven servos. I could probably use Arduino for this task, and in fact there are several Arduino servo shields available (for example from Adafruit or Renbotics).  However one problem is that most support only up to six servos, and second that their accuracy is limited by Arduino’s timer frequency. So instead I looked for dedicated servo controller and found a series of Maestro boards from Pololu. I picked the Pololu Mini Maestro 12-Channel USB Servo Controller. It has many nice features including native USB connection, high resolution pulses (0.25µs) with no jitter, built-in speed and acceleration control, and even scripting capability. Another cool feature is that besides servo control, each channel can be configured as either general input or output. So far I’m using seven channels so I still have five available to connect some sensors (for example distance sensor mounted on gripper might be useful). And last but important factor was that they have SDK in .NET – what more I could wish for! The board itself is very small – half of the size of Tic-Tac box. I picked one for about USD $35 in this store. Perhaps another good alternative would be the Phidgets Advanced Servo 8-Motor – but it is significantly more expensive at USD $87.30. The Maestro Controller Driver and Software package includes Maestro Control Center program with lets you immediately configure the board. For each servo I first figured out their move range and set the min/max limits. I played with setting the speed an acceleration values as well. Big issue for me was that there are two servos that control position of lower arm (shoulder joint), and both have to be moved at the same time. This is where the scripting feature of Pololu board turned out very helpful. I wrote a script that synchronizes position of second servo with first one – so now I only need to move one servo and other will follow automatically. This turned out tricky because I couldn’t find simple offset mapping of the move range for each servo – I had to divide it into several sub-ranges and map each individually. The scripting language is bit assembler-like but gets the job done. And there is even a runtime debugging and stack view available. Altogether I’m very happy with the Pololu Mini Maestro Servo Controller, and with this final piece I completed the build and was able to move my arm from the Meastro Control program.   The total cost of my robotic arm was: $10 laser cut parts $10 metal parts $45 servos $35 servo controller ----------------------- $100 total So here you have all the information about the hardware. In next post I’ll start talking about the software that I wrote in Microsoft Robotics Developer Studio 4. Stay tuned!

    Read the article

  • Quickly Preview Songs in Windows Media Center 12 in Windows 7

    - by DigitalGeekery
    Do you ever wish you could quickly preview a song without having to play it? Today we look at a quick and easy way to do that in Windows Media Player 12. Open Windows Media Player in Library Mode and select your Music library. Hover your cursor over the Title of the song and a Preview pop-up window will appear after a few seconds.    Click on the Preview in the pop-up window and the song will begin to play. As the preview begins to play, you will see the Skip link and a song timer. Click on Skip to jump ahead 15 seconds in the song. When you are finished previewing the song, simply move your mouse away from the preview window to stop playback. Automatically Preview Songs You can adjust settings in Windows Media Player to automatically preview songs when you hover your cursor over the title. Select Tools  from the menu and click Options. On the Options window, select the Library tab and click on Automatically preview songs on title hover. Click OK.   Now when you simply hover your cursor over the song title the preview window will appear and playback will begin automatically. This feature works just as well in Details view as it does in Expanded Tile view. Would you like to stream your music to other computers on your network? Check out our article on how to stream media to other Windows 7 computers. Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Add Color Coding to Windows 7 Media Center Program GuideSchedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Integrate Boxee with Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites

    Read the article

  • Creating a bare bone web-browser: After the html parser, javascript parser, etc have done their work, how do I display the content of the webpage?

    - by aste123
    This is a personal project to learn computer programming. I took a look at this: https://www.udacity.com/course/viewer#!/c-cs262 The following is the approach taken in it: Abstract Syntax Tree is created. But javascript is still not completely broken down in order not to confuse with the html tags. Then the javascript interpreter is called on it. Javascript interpreter stores the text from the write() and document.write() to be used later. Then a graphics library in Python is called which will convert everything to a pdf file and then we convert it into png or jpeg and then display it. My Question: I want to display the actual text in a window (which I will design later) like firefox or chrome does instead of image files so that the data can be selected, copied, etc by the user of the browser. How do I accomplish this? In other words, what are the other elements of a bare bone web browser that I am missing? I would prefer to implement most of the stuff in C++ although if things seem too complicated I might go with Python to save time and create a prototype and later creating another bare bone browser in C++ and add more features. This is a project to learn more. I do realize we already have lots of reliable browsers like firefox, etc. The way I feel it is done: I think after all the broken down contents have been created by the parsers and interpreters, I will need to access them individually from within the window's code (like qt) and then decide upon a good way to display them. I am not sure if it is the way this should be done. Additions after useful comment by Kilian Foth: I found this page: http://friendlybit.com/css/rendering-a-web-page-step-by-step/ 14. A DOM tree is built out of the broken HTML 15. New requests are made to the server for each new resource that is found in the HTML source (typically images, style sheets, and JavaScript files). Go back to step 3 and repeat for each resource. 16. Stylesheets are parsed, and the rendering information in each gets attached to the matching node in the DOM tree 17. Javascript is parsed and executed, and DOM nodes are moved and style information is updated accordingly 18. The browser renders the page on the screen according to the DOM tree and the style information for each node 19. You see the page on the screen I need help with step 18. How do I do that? How much work do Webkit and Gecko do? I want to use a readymade layout renderer for step number 18 and not for anything that comes before that.

    Read the article

  • Java Spotlight Episode 58: Peter Korn and Ofir Leitner on ME Accessibility

    - by Roger Brinkley
    Tweet Interview with Peter Korn and Ofir Leitner on Mobile and Embedded Accessibility. Joining us this week on the Java All Star Developer Panel are Dalibor Topic, Java Free and Open Source Software Ambassador and Alexis Moussine-Pouchkine, Java EE Developer Advocate. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link: Java Spotlight Podcast in iTunes. Show Notes News Announcing Oracle WebLogic 12c Geronimo 3 beta - Another Apache project now compatible with Java EE 6 NetBeans 7.1 RC1 is out JavaFX links of the weeks JavaFX videos on Parleys: Nicolas Lorain's Introduction to JavaFX 2.0 from JavaOne 2011 & Richard Bair on JavaFX Architecture and Programming Model Events Dec 4, SOUJava Geek Bike Ride 2011, Sao Paulo  Dec 5-7, UKOUG, Birmingham, UK Dec 6-8, Java One Brazil, Sao Paulo Dec 9 UAIJUG, Uberlandia Dec 9 CEJUG, Fortaleza/CE Dec 10 GUJAVA, Florianopolis Dec 10 ALJUG, Maceio/AL Dec 11 Javaneiros, Campo Grande/MS Dec 12 GOJAVA, Goiania/GO Dec 13 RioJUG, Rio de Janeiro Feature interview Peter Korn is Oracle's Accessibility Principal – their senior individual contributor on accessibility. He is also Technical Manager of the AEGIS project, leading an EC-funded €12.6m investment building accessibility into future mainstream ICT (FP7-ICT224348). Mr. Korn co-developed and co-implemented the Java Accessibility API, and developed the Java Access Bridge for Windows. He helped design the open source GNOME Accessibility architecture found on most modern UNIX and GNU/Linux systems, and consulted on accessibility support for OpenOffice.org, Firefox, Thunderbird, and other applications. Prior to Sun/Oracle, Peter co-developed the outSPOKEN for Windows screen reader. Mr. Korn represented Sun/Oracle on TEITAC for the Section 508/255 refresh, co-led the OASIS ODF Accessibility subcommittee, and sits on INCITS V2 where he is contributing to ISO 13066: defining AT-IT interoperability standards including specifically the Java Accessibility API. Ofir Leitner is the architect of one of LWUIT's key features - the HTMLComponent which allows rendering HTML within LWUIT applications and to embed web-flows inside apps. Ofir is also responsible for LWUIT's bidirectional and RTL support and for the accessibility work that is being done these days in LWUIT. Mail Bag What's Cool Devoxx 2011 (Alexis) Eclipsecon Europe Talk by Andrew Overholt: IcedTea & IcedTea-Web Geek bike ride & Rio 500 Twitter followers @JavaSpotlight Show Transcripts Transcript for this show is available here when available.

    Read the article

  • Multiple file upload with asp.net 4.5 and Visual Studio 2012

    - by Jalpesh P. Vadgama
    This post will be part of Visual Studio 2012 feature series. In earlier version of ASP.NET there is no way to upload multiple files at same time. We need to use third party control or we need to create custom control for that. But with asp.net 4.5 now its possible to upload multiple file with file upload control. With ASP.NET 4.5 version Microsoft has enhanced file upload control to support HTML5 multiple attribute. There is a property called ‘AllowedMultiple’ to support that attribute and with that you can easily upload the file. So what we are waiting for!! It’s time to create one example. On the default.aspx file I have written following. <asp:FileUpload ID="multipleFile" runat="server" AllowMultiple="true" /> <asp:Button ID="uploadFile" runat="server" Text="Upload files" onclick="uploadFile_Click"/> Here you can see that I have given file upload control id as multipleFile and I have set AllowMultiple file to true. I have also taken one button for uploading file.For this example I am going to upload file in images folder. As you can see I have also attached event handler for button’s click event. So it’s time to write server side code for this. Following code is for the server side. protected void uploadFile_Click(object sender, EventArgs e) { if (multipleFile.HasFiles) { foreach(HttpPostedFile uploadedFile in multipleFile.PostedFiles) { uploadedFile.SaveAs(System.IO.Path.Combine(Server.MapPath("~/Images/"),uploadedFile.FileName)); Response.Write("File uploaded successfully"); } } } Here in the above code you can see that I have checked whether multiple file upload control has multiple files or not and then I have save that in Images folder of web application. Once you run the application in browser it will look like following. I have selected two files. Once I have selected and clicked on upload file button it will give message like following. As you can see now it has successfully upload file and you can see in windows explorer like following. As you can see it’s very easy to upload multiple file in ASP.NET 4.5. Stay tuned for more. Till then happy programming. P.S.: This feature is only supported in browser who support HTML5 multiple file upload. For other browsers it will work like normal file upload control in asp.net.

    Read the article

  • Silverlight Cream for November 20, 2011 - 2 -- #1170

    - by Dave Campbell
    In this Issue: Michael Washington, Oliver Fuh, Jeremy Likness, Derik Whittaker, Jesse Liberty, Jeff Blankenburg(-2-), and Michael Crump. Above the Fold: Silverlight: "Handling Extremely Large Data Sets in Silverlight" Jeremy Likness WP7: "31 Days of Mango | Day #8: Contacts API" Jeff Blankenburg LightSwitch: "LightSwitch Chat Application Using A Data Source Extension" Michael Washington Shoutouts: Michael Palermo's latest Desert Mountain Developers is up Michael Washington's latest Visual Studio #LightSwitch Daily is up Check out Shawn Wildermuth's take on the AppStore and WP7 in general: 40,000 Apps - What Does It Mean? Be sure to check out Jesse Liberty & Paul Betts new book: Programming Reactive Extensions and LINQ, I've just had a little time to look at mine, but don't let the size fool you... this is the good stuff! From SilverlightCream.com: LightSwitch Chat Application Using A Data Source Extension In his latest LightSwitch post, Michael Washington gives up code that will enable two people using the same LightSwitch app to chat. Great detailed tutorial as usual! Handling AdControl Fetching Exception WindowsPhoneGeek turns the blog reigns over to Oliver Fuh for this post about using the AdControl in your WP7 app and handling a common exception you get with the Microsoft AdControl Handling Extremely Large Data Sets in Silverlight In this excerpt from his book, Jeremy Likness discusses reading *LARGE* data sets with Silverlight using 3 different patterns: OData, WCF RIA Services, and MVVM. Using MVVM with the AutoCompleteTextBox in Silverlight 4 Derik Whittaker takes a break from WinRT to discuss the Silverlight 4 AutoCompleteTextBox and MVVM ... including a custom Behavior to allow the backing property to be updated and a command to trigger background searches Yet Another Podcast #52–Peter Torr on Windows Phone Multitasking Jesse Liberty scored Peter Torr on his Latest Yet Another Podcast .. talking about Multitasking on Windows Phone including background agents, the backstack, and other Mango features 31 Days of Mango | Day #8: Contacts API Jeff Blankenburg's Day 8 is about a new namespace on WP7: Microsoft.Phone.UserData ... now giving us the ability to treat the user's contact list like a local database 31 Days of Mango | Day #9: Calendar API On Day 9 in his series, Jeff Blankenburg revisits the Microsoft.Phone.UserData namespace and looks at another set of data: the calendar Want to Decompile Silverlight XAP files? Try JustDecompile Beta! Michael Crump has a post up about the new free developer productivity tool from Telerik that provides assembly browsing and decompiling: JustDecompile ... Just download it! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • SQL SERVER – Puzzle to Win Print Book – Explain Value of PERCENTILE_CONT() Using Simple Example

    - by pinaldave
    From last several days I am working on various Denali Analytical functions and it is indeed really fun to refresh the concept which I studied in the school. Earlier I wrote article where I explained how we can use PERCENTILE_CONT() to find median over here SQL SERVER – Introduction to PERCENTILE_CONT() – Analytic Functions Introduced in SQL Server 2012. Today I am going to ask question based on the same blog post. Again just like last time the intention of this puzzle is as following: Learn new concept of SQL Server 2012 Learn new concept of SQL Server 2012 even if you are on earlier version of SQL Server. On another note, SQL Server 2012 RC0 has been announced and available to download SQL SERVER – 2012 RC0 Various Resources and Downloads. Now let’s have fun following query: USE AdventureWorks GO SELECT SalesOrderID, OrderQty, ProductID, PERCENTILE_CONT(0.5) WITHIN GROUP (ORDER BY ProductID) OVER (PARTITION BY SalesOrderID) AS MedianCont FROM Sales.SalesOrderDetail WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY SalesOrderID DESC GO The above query will give us the following result: The reason we get median is because we are passing value .05 to PERCENTILE_COUNT() function. Now run read the puzzle. Puzzle: Run following T-SQL code: USE AdventureWorks GO SELECT SalesOrderID, OrderQty, ProductID, PERCENTILE_CONT(0.9) WITHIN GROUP (ORDER BY ProductID) OVER (PARTITION BY SalesOrderID) AS MedianCont FROM Sales.SalesOrderDetail WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY SalesOrderID DESC GO Observe the result and you will notice that MidianCont has different value than before, the reason is PERCENTILE_CONT function has 0.9 value passed. For first four value the value is 775.1. Now run following T-SQL code: USE AdventureWorks GO SELECT SalesOrderID, OrderQty, ProductID, PERCENTILE_CONT(0.1) WITHIN GROUP (ORDER BY ProductID) OVER (PARTITION BY SalesOrderID) AS MedianCont FROM Sales.SalesOrderDetail WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY SalesOrderID DESC GO Observe the result and you will notice that MidianCont has different value than before, the reason is PERCENTILE_CONT function has 0.1 value passed. For first four value the value is 709.3. Now in my example I have explained how the median is found using this function. You have to explain using mathematics and explain (in easy words) why the value in last columns are 709.3 and 775.1 Hint: SQL SERVER – Introduction to PERCENTILE_CONT() – Analytic Functions Introduced in SQL Server 2012 Rules Leave a comment with your detailed answer by Nov 25's blog post. Open world-wide (where Amazon ships books) If you blog about puzzle’s solution and if you win, you win additional surprise gift as well. Prizes Print copy of my new book SQL Server Interview Questions Amazon|Flipkart If you already have this book, you can opt for any of my other books SQL Wait Stats [Amazon|Flipkart|Kindle] and SQL Programming [Amazon|Flipkart|Kindle]. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Function, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • A Small Utility to Delete Files recursively by Date

    - by Rick Strahl
    It's funny, but for me the following seems to be a recurring theme: Every few months or years I end up with a host of files on my server that need pruning selectively and often under program control. Today I realized that my SQL Server logs on my server were really piling up and nearly ran my backup drive out of drive space. So occasionally I need to check on that server drive and clean out files. Now with a bit of work this can be done with PowerShell or even a complicated DOS batch file, but heck, to me it's always easier to just create a small Console application that handles this sort of thing with a full command line parser and a few extra options, plus in the end I end up with code that I can actually modify and add features to as is invariably the case. No more searching for a script each time :-) So for my typical copy needs the requirements are: Need to recursively delete files Need to be able to specify a filespec (ie. *.bak) Be able to specify a cut off date before which to delete files And it'd be nice to have an option to send files to the Recycle bin just in case for operator error :-)(and yes that came in handy as I blew away my entire database backup folder by accident - oops!) The end result is a small Console file copy utility that I popped up on Github: https://github.com/RickStrahl/DeleteFiles The source code is up there along with the binary file you can just run. Creating DeleteFiles It's pretty easy to create a simple utility like DeleteFiles of course, so I'm not going to spend any talking about how it works. You can check it out in the repository or download and compile it. The nice thing about using a full programming language like C over something like PowerShell or batch file is that you can make short work of the recursive tree walking that's required to make this work. There's very little code, but there's also a very small, self-contained command line parser in there that might be useful that can be plugged into any project - I've been using it quite a bit for just about any Console application I've been building. If you're like me and don't have the patience or the persistence (that funky syntax requires some 'sticking with it' that I simply can't get over) to get into Powershell coding, having an executable file that I can just copy around or keep in my Utility directory is the only way I'll ever get to reuse this functionality without going on a wild search each time :-) Anyway, hope some of you might find this useful. © Rick Strahl, West Wind Technologies, 2005-2012Posted in Windows  CSharp   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Multicast delegates in c#

    - by Jalpesh P. Vadgama
    In yesterday’s post We learn about Delegates and how we can use delegates in C#. In today’s blog post we are going to learn about Multicast delegates. What is Multicast Delegates? As we all know we can assign methods as object to delegate and later on we can call that method with the help delegates. We can also assign more then methods to delegates that is called Multicast delegates. It’s provide functionality to execute more then method at a time. It’s maintain delegates as invocation list (linked list). Let’s understands that via a example. We are going to use yesterday’s example and then we will extend that code multicast delegates. Following code I have written to demonstrate the multicast delegates. using System; namespace Delegates { class Program { public delegate void CalculateNumber(int a, int b); static void Main(string[] args) { int a = 5; int b = 5; CalculateNumber addNumber = new CalculateNumber(AddNumber); CalculateNumber multiplyNumber = new CalculateNumber(MultiplyNumber); CalculateNumber multiCast = (CalculateNumber)Delegate.Combine (addNumber, multiplyNumber); multiCast.Invoke(a,b); Console.ReadLine(); } public static void AddNumber(int a, int b) { Console.WriteLine("Adding Number"); Console.WriteLine(5 + 6); } public static void MultiplyNumber(int a, int b) { Console.WriteLine("Multiply Number"); Console.WriteLine(5 + 6); } } } As you can see in the above code I have created two method one for adding two numbers and another for multiply two number. After that I have created two same CalculateNumber delegates addNumber and multiplyNumber then I have create a multicast delegates multiCast with combining two delegates. Now I want to call this both method so I have used Invoke method to call this delegates. As now our code is let’s run the application. Following is a output as expected. As you can we can execute multiple methods with multicast delegates the only thing you need to take care is that we need to type for both delegates. That’s it. Hope you like it. Stay tuned for more.. Till then happy programming.

    Read the article

  • Getting Started With nServiceBus on VAN Mar 31

    - by van
    Topic: nServiceBus is mature and powerful open source framework that enables to design robust, scalable, message-based, service-oriented architectures. Latest improvements in the configuration API enables developers to quickly get started and build a working simple system that uses messaging infrastructure. The goal of this session is to give a jump start with the framework, introduce basic concepts such as message handlers, Sagas, Pub/Sub, Generic Host and also create a working demo application that uses publish/subscribe messaging. The content of the session is addressed to developers that are interested in learning how to get started using nServiceBus in order to design and build distributed systems. Bio: Bernard Kowalski is currently a Software Developer at Microdesk, one of Autodesk's leading partners in providing variety of Geospatial and Computer-Aided Design solutions. Bernard has experience developing .NET framework-based applications utilizing Windows Forms, Windows Services, ASP.NET MVC, and Web services. In a recent project, Bernard architected and implemented a distributed system based on SOA principles using an open source implementation of an Enterprise Service Bus. Bernard develops software with Agile patterns and practices using Domain Driven Design combined with TDD (Test Driven Development). He is familiar with all of the following APIs: Autodesk Vault/Product Stream API, AutoCAD ActiveX/VBA/.NET API, AutoCAD Mechanical API, Autodesk Inventor API, Autodesk MapGuide Enterprise. Prior to joining Microdesk, Bernard worked as a researcher and teacher at the University of Science and Technology in Krakow, Poland where he was awarded with a PhD in Computer Methods in Materials Science. He also participated in research projects where he developed applications for analysis of hot compression test results using advanced optimization techniques. He also developed Finite Element Method-based programs for thermal and stress analysis using C++ and FORTRAN. Bernard is a member of the Domain Driven Design and ALT.NET user groups in NYC. Virtual ALT.NET (VAN) is the online gathering place of the ALT.NET community. Through conversations, presentations, pair programming and dojos, we strive to improve, explore, and challenge the way we create software. Using net conferencing technology such as Skype and LiveMeeting, we hold regular meetings, open to anyone, usually taking the form of a presentation or an Open Space Technology-style conversation. Please see the Calendar(http://www.virtualaltnet.com/Home/Calendar) to find a VAN group that meets at a time convenient to you, and feel welcome to join a meeting. Past sessions can be found on the Recording page. To stay informed about VAN activities, you can subscribe to the Virtual ALT.NET Google Group and follow the Virtual ALT.NET blog. Times below are Central Standard Time Start Time: Wed, Mar 31, 2010 8:00 PM UTC/GMT -5 hours End Time: Wed, Mar 31, 2010 10:00 PM UTC/GMT -5 hours Attendee URL: http://www.virtualaltnet.com/van Zach Young http://www.virtualaltnet.com

    Read the article

  • Do I need to match hardware on a Mac to my PC to get the same user experience?

    - by Darth
    I've been playing around with the thought of moving from a PC to a Mac. if you don't want to read this, skip to the "upgrade options" My current setup Most of my time I spent moving back and forth between Linux and Windows. During the last upgrade to Vista, I got myself pc with Core 2 Quad, 8GB of RAM and GeForce 9800GTX+. Currently I'm running dual boot between Ubuntu 10.04 and Windows Vista x64. Most of my work, around 80%, I can do on Ubuntu, which is mostly Ruby/Java programming. If that was all I needed, Ubuntu would be really great. However, I also do quite a lot of Photography and Design, which forces me to use Adobe software (not only Photoshop). I also work with Wacom Intuos4 tablet, which doesn't really have great support on Linux machines. I've tried virtualization both ways (Linux in Win and Win in Linux), but neither was anywhere near satisfying. These are those of many many reasons I want to move to OS X. Upgrade options This is how I see my upgrade options: Mac Mini - cheapest solution, but worst performance iMac - more expensive, better performing with second LCD for free Mac Pro - could match my current PC performance, currently outside of the price range When I compare the Mac hardware vs my current PC, it will be always worse, unless I decide to pump in a lot of money. The question that comes to my head, do I need to match my current PC hardware to get the same user experience with a Mac? If I look at it from the Vista point of view, 2GB RAM is as low as it gets, 4GB is usable ... and the 8GB runs very smoothly. PC HW != Mac HW? If I bought the Mac Mini for roughly the same price I paid for my PC (Core 2 Quad with 8GB RAM), I'd get Core 2 Duo with 4GB RAM. But I don't want to run Vista on it, so I can't compare the hardware directly. Say that I want to do the same things on the Mac Mini as I do on my PC, eg. open up 50 tabs in Google Chrome and start working with a large PSD in Photoshop (couple hundred MB), would running on Mac OS X compensate for the lower hardware performance? My point is, that if I'm about to upgrade, I wouldn't like to upgrade to hardware that runs a lot slower. Good analogy for this is Vista vs Ubuntu, where you can run Ubuntu smoothly on a low end laptop, but in Vista, you'd be happy to open a browser. Does the same principle apply to OS X?

    Read the article

  • JCP.Next - Early Adopters of JCP 2.8

    - by Heather VanCura
    JCP.Next is a series of three JSRs (JSR 348, JSR 355 and JSR 358), to be defined through the JCP process itself, with the JCP Executive Committee serving as the Expert Group. The proposed JSRs will modify the JCP's processes  - the Process Document and Java Specification Participation Agreement (JSPA) and will apply to all new JSRs for all Java platforms.   The first - JCP.next.1, or more formally JSR 348, Towards a new version of the Java Community Process - was completed and put into effect in October 2011 as JCP 2.8. This focused on a small number of simple but important changes to make our process more transparent and to enable broader participation. We're already seeing the benefits of these changes as new and existing JSRs adopt the new requirements. The second - JSR 355, Executive Committee Merge, is also Final. You can read the JCP 2.9 Process Document .  As part of the JSR 355 Final Release, the JCP Executive Committee published revisions to the JCP Process Document (version 2.9) and the EC Standing Rules (version 2.2).  The changes went into effect following the 2012 EC Elections in November. The third JSR 358, A major revision of the Java Community Process was submitted in June 2012.  This JSR will modify the Java Specification Participation Agreement (JSPA) as well as the Process Document, and will tackle a large number of complex issues, many of them postponed from JSR 348. For these reasons, the JCP EC (acting as the Expert Group for this JSR), expects to spend a considerable amount of time working on. The JSPA is defined by the JCP as "a one-year, renewable agreement between the Member and Oracle. The success of the Java community depends upon an open and transparent JCP program.  JSR 358, A major revision of the Java Community Process, is now in process and can be followed on java.net. The following JSRs and Spec Leads were the early adopters of JCP 2.8, who voluntarily migrated their JSRs from JCP 2.x to JCP 2.8 or above.  More candidates for 2012 JCP Star Spec Leads! JSR 236, Concurrency Utilities for Java EE (Anthony Lai/Oracle), migrated April 2012 JSR 308, Annotations on Java Types (Michael Ernst, Alex Buckley/Oracle), migrated September 2012 JSR 335, Lambda Expressions for the Java Programming Language (Brian Goetz/Oracle), migrated October 2012 JSR 337, Java SE 8 Release Contents (Mark Reinhold/Oracle) – EG Formation, migrated September 2012 JSR 338, Java Persistence 2.1 (Linda DeMichiel/Oracle), migrated January 2012 JSR 339, JAX-RS 2.0: The Java API for RESTful Web Services (Santiago Pericas-Geertsen, Marek Potociar/Oracle), migrated July 2012 JSR 340, Java Servlet 3.1 Specification (Shing Wai Chan, Rajiv Mordani/Oracle), migrated August 2012 JSR 341, Expression Language 3.0 (Kin-man Chung/Oracle), migrated August 2012 JSR 343, Java Message Service 2.0 (Nigel Deakin/Oracle), migrated March 2012 JSR 344, JavaServer Faces 2.2 (Ed Burns/Oracle), migrated September 2012 JSR 345, Enterprise JavaBeans 3.2 (Marina Vatkina/Oracle), migrated February 2012 JSR 346, Contexts and Dependency Injection for Java EE 1.1 (Pete Muir/RedHat) – migrated December 2011

    Read the article

  • techniques for an AI for a highly cramped turn-based tactics game

    - by Adam M.
    I'm trying to write an AI for a tactics game in the vein of Final Fantasy Tactics or Vandal Hearts. I can't change the game rules in any way, only upgrade the AI. I have experience programming AI for classic board games (basically minimax and its variants), but I think the branching factor is too great for the approach to be reasonable here. I'll describe the game and some current AI flaws that I'd like to fix. I'd like to hear ideas for applicable techniques. I'm a decent enough programmer, so I only need the ideas, not an implementation (though that's always appreciated). I'd rather not expend effort chasing (too many) dead ends, so although speculation and brainstorming are good and probably helpful, I'd prefer to hear from somebody with actual experience solving this kind of problem. For those who know it, the game is the land battle mini-game in Sid Meier's Pirates! (2004) and you can skim/skip the next two paragraphs. For those who don't, here's briefly how it works. The battle is turn-based and takes place on a 16x16 grid. There are three terrain types: clear (no hindrance), forest (hinders movement, ranged attacks, and sight), and rock (impassible, but does not hinder attacks or sight). The map is randomly generated with roughly equal amounts of each type of terrain. Because there are many rock and forest tiles, movement is typically very cramped. This is tactically important. The terrain is not flat; higher terrain gives minor bonuses. The terrain is known to both sides. The player is always the attacker and the AI is always the defender, so it's perfectly valid for the AI to set up a defensive position and just wait. The player wins by killing all defenders or by getting a unit to the city gates (a tile on the other side of the map). There are very few units on each side, usually 4-8. Because of this, it's crucial not to take damage without gaining some advantage from it. Units can take multiple actions per turn. All units on one side move before any units on the other side. Order of execution is important, and interleaving of actions between units is often useful. Units have melee and ranged attacks. Melee attacks vary widely in strength; ranged attacks have the same strength but vary in range. The main challenges I face are these: Lots of useful move combinations start with a "useless" move that gains no immediate advantage, or even loses advantage, in order to set up a powerful flank attack in the future. And, since the player units are stronger and have longer range, the AI pretty much always has to take some losses before they can start to gain kills. The AI must be able to look ahead to distinguish between sacrificial actions that provide a future benefit and those that don't. Because the terrain is so cramped, most of the tactics come down to achieving good positioning with multiple units that work together to defend an area. For instance, two defenders can often dominate a narrow pass by positioning themselves so an enemy unit attempting to pass must expose itself to a flank attack. But one defender in the same pass would be useless, and three units can defend a slightly larger pass. Etc. The AI should be able to figure out where the player must go to reach the city gates and how to best position its few units to cover the approaches, shifting, splitting, or combining them appropriately as the player moves. Because flank attacks are extremely deadly (and engineering flank attacks is key to the player strategy), the AI should be competent at moving its units so that they cover each other's flanks unless the sacrifice of a unit would give a substantial benefit. They should also be able to force flank attacks on players, for instance by threatening a unit from two different directions such that responding to one threat exposes the flank to the other. The AI should attack if possible, but sometimes there are no good ways to approach the player's position. In that case, the AI should be able to recognize this and set up a defensive position of its own. But the AI shouldn't be vulnerable to a trivial exploit where the player repeatedly opens and closes a hole in his defense and shoots at the AI as it approaches and retreats. That is, the AI should ideally be able to recognize that the player is capable of establishing a solid defense of an area, even if the defense is not currently in place. (I suppose if a good unit allocation algorithm existed, as needed for the second bullet point, the AI could run it on the player units to see where they could defend.) Because it's important to choose a good order of action and interleave actions between units, it's not as simple as just finding the best move for each unit in turn. All of these can be accomplished with a minimax search in theory, but the search space is too large, so specialized techniques are needed. I thought about techniques such as influence mapping, but I don't see how to use the technique to great effect. I thought about assigning goals to the units. This can help them work together in some limited way, and the problem of "how do I accomplish this goal?" is easier to solve than "how do I win this battle?", but assigning good goals is a hard problem in itself, because it requires knowing whether the goal is achievable and whether it's a good use of resources. So, does anyone have specific ideas for techniques that can help cleverize this AI? Update: I found a related question on Stackoverflow: http://stackoverflow.com/questions/3133273/ai-for-a-final-fantasy-tactics-like-game The selected answer gives a decent approach to choosing between alternative actions, but it doesn't seem to have much ability to look into the future and discern beneficial sacrifices from wasteful ones. It also focuses on a single unit at a time and it's not clear how it could be extended to support cooperation between units in defending or attacking.

    Read the article

  • Azure, don't give me multiple VMs, give me one elastic VM

    - by FransBouma
    Yesterday, Microsoft revealed new major features for Windows Azure (see ScottGu's post). It all looks shiny and great, but after reading most of the material describing the new features, I still find the overall idea behind all of it flawed: why should I care on how much VMs my web app runs? Isn't that a problem to solve for the Windows Azure engineers / software? And what if I need the file system, why can't I simply get a virtual filesystem ? To illustrate my point, let's use a real example: a product website with a customer system/database and next to it a support site with accompanying database. Both are written in .NET, using ASP.NET and use a SQL Server database each. The product website offers files to download by customers, very simple. You have a couple of options to host these websites: Buy a server, place it in a rack at an ISP and run the sites on that server Use 'shared hosting' with an ISP, which means your sites' appdomains are running on the same machine, as well as the files stored, and the databases are hosted in the same server as the other shared databases. Hire a VM, install your OS of choice at an ISP, and host the sites on that VM, basically the same as the first option, except you don't have a physical server At some cloud-vendor, either host the sites 'shared' or in a VM. See above. With all of those options, scalability is a problem, even the cloud-based ones, though not due to the same reasons: The physical server solution has the obvious problem that if you need more power, you need to buy a bigger server or more servers which requires you to add replication and other overhead Shared hosting solutions are almost always capped on memory usage / traffic and database size: if your sites get too big, you have to move out of the shared hosting environment and start over with one of the other solutions The VM solution, be it a VM at an ISP or 'in the cloud' at e.g. Windows Azure or Amazon, in theory allows scaling out by simply instantiating more VMs, however that too introduces the same overhead problems as with the physical servers: suddenly more than 1 instance runs your sites. If a cloud vendor offers its services in the form of VMs, you won't gain much over having a VM at some ISP: the main problems you have to work around are still there: when you spin up more than one VM, your application must be completely stateless at any moment, including the DB sub system, because what's in memory in instance 1 might not be in memory in instance 2. This might sounds trivial but it's not. A lot of the websites out there started rather small: they were perfectly runnable on a single machine with normal memory and CPU power. After all, you don't need a big machine to run a website with even thousands of users a day. Moving these sites to a multi-VM environment will cause a problem: all the in-memory state they use, all the multi-page transitions they use while keeping state across the transition, they can't do that anymore like they did that on a single machine: state is something of the past, you have to store every byte of state in either a DB or in a viewstate or in a cookie somewhere so with the next request, all state information is available through the request, as nothing is kept in-memory. Our example uses a bunch of files in a file system. Using multiple VMs will require that these files move to a cloud storage system which is mounted in each VM so we don't have to store the files on each VM. This might require different file paths, but this change should be minor. What's perhaps less minor is the maintenance procedure in place on the new type of cloud storage used: instead of ftp-ing into a VM, you might have to update the files using different ways / tools. All in all this makes moving an existing website which was written for an environment that's based around a VM (namely .NET with its CLR) overly cumbersome and problematic: it forces you to refactor your website system to be able to be used 'in the cloud', which is caused by the limited way how e.g. Windows Azure offers its cloud services: in blocks of VMs. Offer a scalable, flexible VM which extends with my needs Instead, cloud vendors should offer simply one VM to me. On that VM I run the websites, store my DB and my files. As it's a virtual machine, how this machine is actually ran on physical hardware (e.g. partitioned), I don't care, as that's the problem for the cloud vendor to solve. If I need more resources, e.g. I have more traffic to my server, way more visitors per day, the VM stretches, like I bought a bigger box. This frees me from the problem which comes with multiple VMs: I don't have any refactoring to do at all: I can simply build my website as if it runs on my local hardware server, upload it to the VM offered by the cloud vendor, install it on the VM and I'm done. "But that might require changes to windows!" Yes, but Microsoft is Windows. Windows Azure is their service, they can make whatever change to what they offer to make it look like it's windows. Yet, they're stuck, like Amazon, in thinking in VMs, which forces developers to 'think ahead' and gamble whether they would need to migrate to a cloud with multiple VMs in the future or not. Which comes down to: gamble whether they should invest time in code / architecture which they might never need. (YAGNI anyone?) So the VM we're talking about, is that a low-level VM which runs a guest OS, or is that VM a different kind of VM? The flexible VM: .NET's CLR ? My example websites are ASP.NET based, which means they run inside a .NET appdomain, on the .NET CLR, which is a VM. The only physical OS resource the sites need is the file system, however this too is accessed through .NET. In short: all the websites see is what .NET allows the websites to see, the world as the websites know it is what .NET shows them and lets them access. How the .NET appdomain is run physically, that's the concern of .NET, not mine. This begs the question why Windows Azure doesn't offer virtual appdomains? Or better: .NET environments which look like one machine but could be physically multiple machines. In such an environment, no change has to be made to the websites to migrate them from a local machine or own server to the cloud to get proper scaling: the .NET VM will simply scale with the need: more memory needed, more CPU power needed, it stretches. What it offers to the application running inside the appdomain is simply increasing, but not fragmented: all resources are available to the application: this means that the problem of how to scale is back to where it should be: with the cloud vendor. "Yeah, great, but what about the databases?" The .NET application communicates with the database server through a .NET ADO.NET provider. Where the database is located is not a problem of the appdomain: the ADO.NET provider has to solve that. I.o.w.: we can host the databases in an environment which offers itself as a single resource and is accessible through one connection string without replication overhead on the outside, and use that environment inside the .NET VM as if it was a single DB. But what about memory replication and other problems? This environment isn't simple, at least not for the cloud vendor. But it is simple for the customer who wants to run his sites in that cloud: no work needed. No refactoring needed of existing code. Upload it, run it. Perhaps I'm dreaming and what I described above isn't possible. Yet, I think if cloud vendors don't move into that direction, what they're offering isn't interesting: it doesn't solve a problem at all, it simply offers a way to instantiate more VMs with the guest OS of choice at the cost of me needing to refactor my website code so it can run in the straight jacket form factor dictated by the cloud vendor. Let's not kid ourselves here: most of us developers will never build a website which needs a truck load of VMs to run it: almost all websites created by developers can run on just a few VMs at most. Yet, the most expensive change is right at the start: moving from one to two VMs. As soon as you have refactored your website code to run across multiple VMs, adding another one is just as easy as clicking a mouse button. But that first step, that's the problem here and as it's right there at the beginning of scaling the website, it's particularly strange that cloud vendors refuse to solve that problem and leave it to the developers to solve that. Which makes migrating 'to the cloud' particularly expensive.

    Read the article

  • ArchBeat Link-o-Rama for 11/15/2011

    - by Bob Rhubart
    Java Magazine - November/December 2011 - by and for the Java Community Java Magazine is an essential source of knowledge about Java technology, the Java programming language, and Java-based applications for people who rely on them in their professional careers, or who aspire to. Enterprise 2.0 Conference: November 14-17 | Kellsey Ruppel "Oracle is proud to be a Gold sponsor of the Enterprise 2.0 West Conference, November 14-17, 2011 in Santa Clara, CA. You will see the latest collaboration tools and technologies, and learn from thought leaders in Enterprise 2.0's comprehensive conference." The Return of Oracle Wikis: Bigger and Better | @oracletechnet The Oracle Wikis are back - this time, with Oracle SSO on top and powered by Atlassian's Confluence technology. These wikis offer quite a bit more functionality than the old platform. Cloud Migration Lifecycle | Tom Laszewski Laszewski breaks down the four steps in the Set Up Phase of the Cloud Migration lifecycle. Architecture all day. Oracle Technology Network Architect Day - Phoenix, AZ - Dec14 Spend the day with your peers learning from Oracle experts in engineered systems, cloud computing, Oracle Coherence, Oracle WebLogic, and more. Registration is free, but seating is limited. SOA all the Time; Architects in AZ; Clearing Info Integration Hurdles This week on the Architect Home Page on OTN. Live Webcast: New Innovations in Oracle Linux Date: Tuesday, November 15, 2011 Time: 9:00 AM PT / Noon ET Speakers: Chris Mason, Elena Zannoni. People in glass futures should throw stones | Nicholas Carr "Remember that Microsoft video on our glassy future? Or that one from Corning? Or that one from Toyota?" asks Carr. "What they all suggest, and assume, is that our rich natural 'interface' with the world will steadily wither away as we become more reliant on software mediation." Integration of SABSA Security Architecture Approaches with TOGAF ADM | Jeevak Kasarkod Jeevak Kasarkod's overview of a new paper from the OpenGroup and the SABSA institute "which delves into the incorporatation of risk management and security architecture approaches into a well established enterprise architecture methodology - TOGAF." Cloud Computing at the Tactical Edge | Grace Lewis - SEI Lewis describes the SEI's work with Cloudlets, " lightweight servers running one or more virtual machines (VMs), [that] allow soldiers in the field to offload resource-consumptive and battery-draining computations from their handheld devices to nearby cloudlets." Simplicity Is Good | James Morle "When designing cluster and storage networking for database platforms, keep the architecture simple and avoid the complexities of multi-tier topologies," says Morle. "Complexity is the enemy of availability." Mainframe as the cloud? Tom Laszewski There's nothing new about using the mainframe in the cloud, says Laszewski. Let Devoxx 2011 begin! | The Aquarium The Aquarium marks the kick-off of Devoxx 2011 with "a quick rundown of the Java EE and GlassFish side of things."

    Read the article

  • What have my fellow Delphi programmers done to make Eclipse/Java more like Delphi?

    - by Robert Oschler
    I am a veteran Delphi programmer working on my first real Android app. I am using Eclipse and Java as my development environment. The thing I miss the most of course is Delphi's VCL components and the associated IDE tools for design-time editing and code creation. Fortunately I am finding Eclipse to be one hell of an IDE with it's lush context sensitive help, deep auto-complete and code wizard facilities, and other niceties. This is a huge double treat since it is free. However, here is an example of something in the Eclipse/Java environment that will give a Delphi programmer pause. I will use the simple case of adding an "on-click" code stub for an OK button. DELPHI Drop button on a form Double-click button on form and fill in the code that will fire when the button is clicked ECLIPSE Drop button on layout in the graphical XML file editor Add the View.OnClickListener interface to the containing class's "implements" list if not there already. (Command+1 on Macs, Ctrl + 1 on PCs I believe). Use Eclipse to automatically add the code stub for unimplemented methods needed to support the View.OnClickListener interface, thus creating the event handler function stub. Find the stub and fill it in. However, if you have more than one possible click event source then you will need to inspect the View parameter to see which View element triggered the OnClick() event, thus requiring a case statement to handle multiple click event sources. NOTE: I am relatively new to Eclipse/Java so if there is a much easier way of doing this please let me know. Now that work flow isn't all that terrible, but again, that's just the simplest of use cases. Ratchet up the amount of extra work and thinking for a more complex component (aka widget) and the large number of properties/events it might have. It won't be long before you miss dearly the Delphi intelligent property editor and other designers. Eclipse tries to cover this ground by having an extensive list of properties in the menu that pops up when you right-click over a component/widget in the XML graphical layout editor. That's a huge and welcome assist but it's just not even close to the convenience of the Delphi IDE. Let me be very clear. I absolutely am not ranting nor do I want to start a Delphi vs. Java ideology discussion. Android/Eclipse/Java is what it is and there is a lot that impresses me. What I want to know is what other Delphi programmers that made the switch to the Eclipse/Java IDE have done to make things more Delphi like, and not just to make component/widget event code creation easier but any programming task. For example: Clever tips/tricks Eclipse plugins you found other ideas? Any great blog posts or web resources on the topic are appreciated too. -- roschler

    Read the article

  • Microsoft Technical Computing

    - by Daniel Moth
    In the past I have described the team I belong to here at Microsoft (Parallel Computing Platform) in terms of contributing to Visual Studio and related products, e.g. .NET Framework. To be more precise, our team is part of the Technical Computing group, which is still part of the Developer Division. This was officially announced externally earlier this month in an exec email (from Bob Muglia, the president of STB, to which DevDiv belongs). Here is an extract: "… As we build the Technical Computing initiative, we will invest in three core areas: 1. Technical computing to the cloud: Microsoft will play a leading role in bringing technical computing power to scientists, engineers and analysts through the cloud. Existing high- performance computing users will benefit from the ability to augment their on-premises systems with cloud resources that enable ‘just-in-time’ processing. This platform will help ensure processing resources are available whenever they are needed—reliably, consistently and quickly. 2. Simplify parallel development: Today, computers are shipping with more processing power than ever, including multiple cores, but most modern software only uses a small amount of the available processing power. Parallel programs are extremely difficult to write, test and trouble shoot. However, a consistent model for parallel programming can help more developers unlock the tremendous power in today’s modern computers and enable a new generation of technical computing. We are delivering new tools to automate and simplify writing software through parallel processing from the desktop… to the cluster… to the cloud. 3. Develop powerful new technical computing tools and applications: We know scientists, engineers and analysts are pushing common tools (i.e., spreadsheets and databases) to the limits with complex, data-intensive models. They need easy access to more computing power and simplified tools to increase the speed of their work. We are building a platform to do this. Our development efforts will yield new, easy-to-use tools and applications that automate data acquisition, modeling, simulation, visualization, workflow and collaboration. This will allow them to spend more time on their work and less time wrestling with complicated technology. …" Our Parallel Computing Platform team is directly responsible for item #2, and we work very closely with the teams delivering items #1 and #3. At the same time as the exec email, our marketing team unveiled a website with interviews that I invite you to check out: Modeling the World. Comments about this post welcome at the original blog.

    Read the article

  • What micro web-framework has the lowest overhead but includes templating

    - by Simon Martin
    I want to rewrite a simple small (10 page) website and besides a contact form it could be written in pure html. It is currently built with classic asp and Dreamweaver templates. The reason I'm not simply writing 10 html pages is that I want to keep the layout all in 1 place so would need either includes or a masterpage. I don't want to use Dreamweaver templates, or batch processing (like org-mode) because I want to be able to edit using notepad (or Visual Studio) because occasionally I might need to edit a file on the server (Go Daddy's IIS admin interface will let me edit text). I don't want to use ASP.NET MVC or WebForms (which I use in my day job) because I don't need all the overhead they bring with them when essentially I'm serving up 9 static files, 1 contact form and 1 list of clubs (that I aim to use jQuery to filter). The shared hosting package I have on Go Daddy seems to take a long time to spin up when serving aspx files. Currently the clubs page is driven from an MS SQL database that I try to keep up to date by manually checking the dojo locator on the main HQ pages and editing the entries myself, this is again way over the top. I aim to get a text file with the club details (probably in JSON or xml format) and use that as the source for the clubs page. There will need to be a bit of programming for this as the HQ site is unable to provide an extract / feed so something will have to scrape the site periodically to update my clubs persistence file. I'd like that to be automated - but I'm happy to have that triggered on a visit to the clubs page so I don't need to worry about scheduling a job. I would probably have a separate process that updates the persistence that has nothing to do with the rest of the site. Ideally I'd like to use Mercurial (or git) to publish, I know Bitbucket (and github) both serve static page sites so they wouldn't work in this scenario (dynamic pages and a contact form) but that's the model I'd like to use if there is such a thing. My requirements are: Simple templating system, 1 place to define header, footers, menu etc., that can be edited using just notepad. Very minimal / lightweight framework. I don't need a monster for 10 pages Must run either on IIS7 (shared Go Daddy Windows hosting) or other free host

    Read the article

  • Change default language settings in Visual Studio 2012

    - by sreejukg
    The first thing you need to do after the installation of Visual Studio 2012 is to choose the IDE preferences. Once you select your preferred collection of settings, the IDE will always choose dialogs and other options according to your selection. Nowadays developer’s needs to work with different programming environments and due to this, developers might need to reset the default settings. In this article, I am going to demonstrate how you can change the default settings in Visual Studio 2012. For the purpose of this demonstration, I have installed Visual Studio 2012 and selected C++ as my default environment settings. So now when I go to file -> new project, it will give me C++ templates by default as follows. If you want to select another language, you need to expand Other Languages section and select C# or VB. Now I am going to change these default settings. I am going to change the default language preference to C#. In Visual Studio 2012, go to tools menu and select Import and Export Settings. Here you have 3 options; one is to export the current settings so that the settings are saved for future use. Also you can import previously saved settings. The last option available is to reset it to default. It is a good Idea to export your settings and import it as you need in later stages. To reset the settings to default select the Reset option and click next. Now Visual Studio will ask you to whether you would like to save the settings, which can be used in future to restore. Select any one option and click next. For the purpose of this demo, I have selected not to save the settings. Click Next button to continue. Now Visual Studio will bring you the similar dialog that appears just after installation to select your IDE settings. Select the required settings from the available list and click Finish button. Click Finish once you are done. If everything OK, you will see the success message as below. Now go to file -> new Project, you will see the selected language appear by default. I selected C# in the previous step and the new project dialog appears as follows. Changing IDE settings in Visual Studio 2012 is very easy and straight forward.

    Read the article

  • Using MVP, how to create a view from another view, linked with the same model object

    - by Dinaiz
    Background We use the Model-View-Presenter design pattern along with the abstract factory pattern and the "signal/slot" pattern in our application, to fullfill 2 main requirements Enhance testability (very lightweight GUI, every action can be simulated in unit tests) Make the "view" totally independant from the rest, so we can change the actual view implementation, without changing anything else In order to do so our code is divided in 4 layers : Core : which holds the model Presenter : which manages interactions between the view interfaces (see bellow) and the core View Interfaces : they define the signals and slots for a View, but not the implementation Views : the actual implementation of the views When the presenter creates or deals with views, it uses an abstract factory and only knows about the view interfaces. It does the signal/slot binding between views interfaces. It doesn't care about the actual implementation. In the "views" layer, we have a concrete factory which deals with implementations. The signal/slot mechanism is implemented using a custom framework built upon boost::function. Really, what we have is something like that : http://martinfowler.com/eaaDev/PassiveScreen.html Everything works fine. The problem However, there's a problem I don't know how to solve. Let's take for example a very simple drag and drop example. I have two ContainersViews (ContainerView1, ContainerView2). ContainerView1 has an ItemView1. I drag the ItemView1 from ContainerView1 to ContainerView2. ContainerView2 must create an ItemView2, of a different type, but which "points" to the same model object as ItemView1. So the ContainerView2 gets a callback called for the drop action with ItemView1 as a parameter. It calls ContainerPresenterB passing it ItemViewB In this case we are only dealing with views. In MVP-PV, views aren't supposed to know anything about the presenter nor the model, right ? How can I create the ItemView2 from the ItemView1, not knowing which model object is ItemView1 representing ? I thought about adding an "itemId" to every view, this id being the id of the core object the view represents. So in pseudo code, ContainerPresenter2 would do something like itemView2=abstractWidgetFactory.createItemView2(); this.add(itemView2,itemView1.getCoreObjectId()) I don't get too much into details. That just work. The problem I have here is that those itemIds are just like pointers. And pointers can be dangling. Imagine that by mistake, I delete itemView1, and this deletes coreObject1. The itemView2 will have a coreObjectId which represents an invalid coreObject. Isn't there a more elegant and "bulletproof" solution ? Even though I never did ObjectiveC or macOSX programming, I couldn't help but notice that our framework is very similar to Cocoa framework. How do they deal with this kind of problem ? Couldn't find more in-depth information about that on google. If someone could shed some light on this. I hope this question isn't too confusing ...

    Read the article

  • Code refactoring with Visual Studio 2010 Part-2

    - by Jalpesh P. Vadgama
    In previous post I have written about Extract Method Code refactoring option. In this post I am going to some other code refactoring features of Visual Studio 2010.  Renaming variables and methods is one of the most difficult task for a developer. Normally we do like this. First we will rename method or variable and then we will find all the references then do remaining over that stuff. This will be become difficult if your variable or method are referenced at so many files and so many place. But once you use refactor menu rename it will be bit Easy. I am going to use same code which I have created in my previous post. I am just once again putting that code here for your reference. using System; namespace CodeRefractoring { class Program { static void Main(string[] args) { string firstName = "Jalpesh"; string lastName = "Vadgama"; Print(firstName, lastName); } private static void Print(string firstName, string lastName) { Console.WriteLine(string.Format("FirstName:{0}", firstName)); Console.WriteLine(string.Format("LastName:{0}", lastName)); Console.ReadLine(); } } } Now I want to rename print method in this code. To rename the method you can select method name and then select Refactor-> Rename . Once I selected Print method and then click on rename a dialog box will appear like following. Now I am renaming this Print method to PrintMyName like following.   Now once you click OK a dialog will appear with preview of code like following. It will show preview of code. Now once you click apply. You code will be changed like following. using System; namespace CodeRefractoring { class Program { static void Main(string[] args) { string firstName = "Jalpesh"; string lastName = "Vadgama"; PrintMyName(firstName, lastName); } private static void PrintMyName(string firstName, string lastName) { Console.WriteLine(string.Format("FirstName:{0}", firstName)); Console.WriteLine(string.Format("LastName:{0}", lastName)); Console.ReadLine(); } } } So that’s it. This will work in multiple files also. Hope you liked it.. Stay tuned for more.. Till that Happy Programming.

    Read the article

  • Nokia vs. The World

    - by Michael B. McLaughlin
    I’m looking forward to the launch of the Nokia Lumia 920. Why? Well, it stacks up better than the competition for one thing. Then there’s also that security problem that certain other phones have. Mostly, though, it’s because I love my Lumia 900 and the 920, with Windows Phone 8, will be even better. Before I got my Lumia 900, I just took it as given that smart phone cameras couldn’t be good. The Lumia taught me that smart phone cameras can be good if the manufacturer treats them as an important component worth spending time and money on (rather than some thing that consumers expect such that they’d better throw one in). I’m extremely pleased with the quality of pictures that my Lumia 900 gives me as well as the range of settings it provides (you can delve in to tell it a film speed, an f-stop, and a whole range of other settings). And the image stabilization features in the Lumia 920 deliver far better results than the others. Nokia has had great maps for a long time and they continue to improve. Even better, they made a deal that puts many of their excellent maps into Windows Phone 8 itself. There are still Nokia-exclusive features such as Nokia City Lens, of course. But by giving the core OS a great set of fundamental map data and technologies, they help ensure that customers know that buying a Windows Phone 8 will give them a great map experience no matter who made the phone. I’ll be getting a 920, myself, but the HTC and Samsung devices that have been announced have some compelling features, too, and it’s great to know that people who buy one of these won’t need to worry about where their maps might lead them. I’m looking forward to the NFC capabilities and Qi wireless charging my Lumia 920 will have. With the availability of DirectX and C++ programming on Windows Phone 8, I’m also excited about all the great games that will be added to the Windows Phone environment. I love my Xbox Phone. I love my Office phone. I love my Facebook phone. I love my GPS phone. I love my camera phone. I love my SkyDrive phone. In short, I love my Windows Phone!

    Read the article

  • Code refactoring with Visual Studio 2010 Part-1

    - by Jalpesh P. Vadgama
    Visual studio 2010 is a Great IDE(Integrated Development Environment) and we all are using it in day by day for our coding purpose. There are many great features provided by Visual Studio 2010 and Today I am going to show one of great feature called for code refactoring. This feature is one of the most unappreciated features of Visual Studio 2010 as lots of people still not using that and doing stuff manfully. So to explain feature let’s create a simple console application which will print first name and last name like following. And following is code for that. using System; namespace CodeRefractoring { class Program { static void Main(string[] args) { string firstName = "Jalpesh"; string lastName = "Vadgama"; Console.WriteLine(string.Format("FirstName:{0}",firstName)); Console.WriteLine(string.Format("LastName:{0}", lastName)); Console.ReadLine(); } } } So as you can see this is a very basic console application and let’s run it to see output. So now lets explore our first feature called extract method in visual studio you can also do that via refractor menu like following. Just select the code for which you want to extract method and then click refractor menu and then click extract method. Now I am selecting three lines of code and clicking on refactor –> Extract Method just like following. Once you click menu a dialog box will appear like following. As you can I have highlighted two thing first is Method Name where I put Print as Method Name and another one Preview method signature where its smart enough to extract parameter also as We have just selected three lines with  console.writeline.  One you click ok it will extract the method and you code will be like this. using System; namespace CodeRefractoring { class Program { static void Main(string[] args) { string firstName = "Jalpesh"; string lastName = "Vadgama"; Print(firstName, lastName); } private static void Print(string firstName, string lastName) { Console.WriteLine(string.Format("FirstName:{0}", firstName)); Console.WriteLine(string.Format("LastName:{0}", lastName)); Console.ReadLine(); } } } So as you can see in above code its has created a static method called Print and also passed parameter for as firstname and lastname. Isn’t that great!!!. It has also created static print method as I am calling it from static void main.  Hope you liked it.. Stay tuned for more..Till that Happy programming.

    Read the article

< Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >