Search Results

Search found 30819 results on 1233 pages for 'software security'.

Page 476/1233 | < Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >

• ASA 5505 Vlan question

  - by Wayne

  I am setting up a cisco asa 5505 with the base license. I can communicate from inside-outside, outside-inside, inside-home, which is my desired traffic security. I can get http, ssh, and other access from inside-home, but I can't ping from inside-home (192.168.110.0 host to 192.168.7.1 or 192.168.7.0 host). Can someone explain. My config is listed below interface Vlan1<br> nameif inside<br> security-level 100<br> ip address 192.168.110.254 255.255.255.0 <br> !<br> interface Vlan2<br> nameif outside<br> security-level 0<br> pppoe client vpdn group birdie<br> ip address removedIP 255.255.255.255 pppoe <br> !<br> interface Vlan3<br> no forward interface Vlan1<br> nameif home<br> security-level 50<br> ip address 192.168.7.1 255.255.255.0 <br> ! <br> interface Ethernet0/0<br> switchport access vlan 2<br> ! <br> interface Ethernet0/1<br> ! <br> interface Ethernet0/2<br> ! <br> interface Ethernet0/3<br> ! <br> interface Ethernet0/4<br> switchport access vlan 3<br> ! <br> interface Ethernet0/5<br> shutdown <br> ! <br> interface Ethernet0/6<br> shutdown <br> ! <br> interface Ethernet0/7<br> shutdown <br> ! <br> ftp mode passive<br> clock timezone EST -5<br> clock summer-time EDT recurring<br> access-list Outside-In extended permit icmp any any <br> access-list Outside-In extended permit tcp any any eq www <br> access-list Outside-In extended permit tcp any any eq https <br> access-list Outside-In extended permit tcp any any eq 5969 <br> access-list inside_nat0_outbound extended permit ip any 192.168.111.0 255.255.255.224 <br> access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.111.0 255.255.255.0 any <br> access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.110.0 255.255.255.0 <br>any access-list inside_in extended permit icmp any any <br> access-list inside_in extended permit ip any any <br> access-list home_in extended permit icmp any any <br> access-list home_in extended permit ip any any <br> pager lines 24<br> logging enable<br> logging asdm informational<br> mtu inside 1492<br> mtu outside 1492<br> mtu home 1500 <br> ip local pool vpnuser 192.168.111.5-192.168.111.20<br> icmp unreachable rate-limit 1 burst-size 1<br> asdm image disk0:/asdm-524.bin<br> no asdm history enable<br> arp timeout 14400<br> nat-control <br> global (outside) 1 interface<br> nat (inside) 0 access-list inside_nat0_outbound<br> nat (inside) 1 0.0.0.0 0.0.0.0<br> nat (home) 1 192.168.7.0 255.255.255.0<br> static (inside,outside) tcp interface https 192.168.110.6 https netmask 255.255.255.255 <br> static (inside,outside) tcp interface www 192.168.110.6 www netmask 255.255.255.255 <br> static (inside,outside) tcp interface 5969 192.168.110.12 5969 netmask 255.255.255.255 <br> static (inside,home) 192.168.110.0 192.168.110.0 netmask 255.255.255.0 <br> access-group inside_in in interface inside<br> access-group Outside-In in interface outside<br> access-group home_in in interface home<br> route outside 0.0.0.0 0.0.0.0 RemovedIP 1<br>

  Read the article

• Problem with ubuntu 10.10 running from USB drive

  - by Surjya Narayana Padhi

  I recently downloaded Ubuntu 10.10 and created an USB drive with that. I started to run the Ubuntu from that USB drive. But I am facing so much problem. I am thinking why its not so much easy like Windows to do all my job in ubuntu. Always I get some error message or to install something. This time I am getting the following errors. I am trying to download and install Aircrack-ng. So used the command sudo apt-get install aircrack-ng. But the installation stops with the following error : update-initramfs: deferring update (trigger activated) cp: cannot stat `/vmlinuz': No such file or directory dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1) I don't even have the aptitude command installed till now. Are all these errors because of I am running the ubuntu from USB drive? Is there any simple and easy way to go to Ubuntu Software Center and download all the required essentials at one shot and then Aircrack-ng? I could not find the Aircrack-ng in Ubuntu Software Center Can anybody give me detail steps to solve all my problems above. I am frustrated searching for updates and installations. When something works and something does not work. Can anybody suggest me how I should proceed after installing ubuntu to run on a USB drive. So that I can use the OS like Windows. Like software download,wireless driver, sound, video, documents, C:, D: all things should be there. Please somebody help.

  Read the article

• i7 Windows 7 laptop or Macbook Pro 15" (For making 3D model and Animation)

  - by sppdhs

  Hi everyone, I'm thinking of buying a new laptop as my current one will be 5 years old next year and it currently gives me a blue screen everytime I run a heavy software to make 3D models and animation. Question is: Should I buy Macbook Pro or a Windows 7 laptop? I tried to research and some say that Windows would be better, especially because you can buy a very high spec laptop with cheaper price. While some other say Macbook Pro is the better choice as it can run bootcamp with windows 7 100% performance on every software even though it's a mac. Is this true? Which one is actually better? Btw, the software that I usually use is 3Ds Max, Maya, and ZBrush. To note as well, I have never used a Mac before. I've checked around some stores and budget wise, I'll need around AU$3000+ to buy a Macbook pro, and AU$2000+ to buy a windows laptop. Quite a big difference in price range. Thanks in advance for your help.

  Read the article

• Taking stock of an existing ASA Firewall

  - by Nate

  Imagine you are given an existing network using an ASA firewall. The network works, but you aren't sure of anything else. The firewall may be completely improperly configured, with "outside" actually being inside and "inside" actually being outside, for all you know. My question is this: what are the commands to take stock of an existing ASA firewall setup? With only CLI access, how do I figure out: What interfaces are available The names of the interfaces The security levels attached to the interfaces The access-lists attached to the interfaces, including rules and directions I know how to set these things (interface, nameif, security-level, and access-list/access-group), but I don't know how to figure them out given an existing system. On a related note, is there anything else that I should worry about checking to make sure that the network isn't wide open? Thanks!

  Read the article

• Data recovery; nearly 1 tb of movies on a WD 3.5 tb personal cloud drive disappears with scanty traces

  - by Effector Dhanushanth

  I have a great collection of movies that I had stored in a logical mesh of folder on my 3.5 tb WD personal cloud drive. I woke up 1 morning and found that everything was fine with my data on this drive, except for my movie collection: There were two great folders, one "2sort" nd the other "segregated". out of all the segregated sub folders, only letter C D and 2 or 3 others remain. and the 2 sort folder, which has umpteen subfolders, amounting to more than 0.5 tb. is.. it's just gone!! this is a great downfall.. now this is a personal cloud drive and has no usb port etc. unfortunately to hardwire and recover files.. now I'm sure there are softwares out there that can help me recover my beloved movies from such an interestingly "hard-to-reach" (should I say?) device? what may that software be compadre, my happiness lies within your answer.. thank you.. remember, recovery software or (WD) personal cloud. :) these ovies were All, "hand-picked", over the course of ten years.. I just never catalogued my collection.. if I could just get the "list" of my lost collection, that'd be enough.. recovering em would be a bonus.. but they out to be damaged if I were to somehow recover you know? still, I'm certain they're all intact.. I guess the file index just got corrupted.. There surely is a veil of some sort that need to be thrown or pushed aside to reveal my movies.. what software can do/does that? thanks immensely!

  Read the article

• What is a 'firewall sniffer'?

  - by Craig Johnston

  What is a 'firewall sniffer'? How do they compromise the security of: Windows firewall Router firewall NAT firewall

  Read the article

• HTTPS and HTTP issue on server with SSL

  - by Asghar

  I have a site www.example.com for which i purchased SSL cert and installed. And it was working fine, I also have a subdomain with app.example.com which was not on SSL. Both www.example.com and app.example.com are on same IP address. At later we decided to put SSL only on app.frostbox.com and then i configured SSL with app.frostbox.com and it worked fine, Now the issue is that Google is indexing my site as https://www.example.com/ and when users hits the web , Invalid security warning is issued and when user allow security issue they are shown my app.example.com contents. Note: I have my SSL configuration files in /etc/httpd/conf.d/ssl.conf The contents of the ssl.conf are below. NOTE: I tried solutions in .httaccess but none of those worked. Like redirecting 301 redirects etc http://pastebin.com/GCWhpQJq

  Read the article

• Where should my application setup put the binary executables in Windows 7?

  - by KeyboardMonkey

  I created a small Windows app, and am builder a setup for it using NSIS, but what I can't find out is where to put the executables to conform to the new Windows security model. Traditionally we put program files in, well, "c:\program files". With the security model getting more mangled with each Windows version, some users have restricted accounts, and I'm not sure installing into program files will work for these users. Where can I install my program's files that will cater for these lower-privileged users? Oh and I want to avoid ClickOnce.

  Read the article

• Creating an app shortcut in Windows 7 XP Mode

  - by MT_Head

  I have a VERY old legacy app that I've managed to move from machine to machine; the installer for it doesn't actually work under newer versions of Windows, but I was able to track down the registry changes and DLL registrations necessary to make it work. I'm able to create a desktop icon in my XP mode environment, and the program works... but I'd like to add an icon to the Windows 7 menu, and run the program in semi-native mode. For example, the icon for Microsoft Security Essentials in XP mode has the following target: %SystemRoot%\system32\rundll32.exe %SystemRoot%\system32\VMCPropertyHandler.dll,LaunchVMSal "Windows XP Mode" "||232f633" "Microsoft Security Essentials" Now, the only part of that that seems to be "magic" is "||232f633" - does anyone have any idea where that comes from, or how to identify the correct equivalent for an arbitrary program? I gather that, had the program been installed normally through a .msi file (or WISE, or NSIS, or what have you), this id would have been generated automagically... Thanks for any insights!

  Read the article

• High-performance Academic Server [closed]

  - by PHPsmith

  Suppose I want to build a server for the university's academic interests. The server is dedicated only to a site, where users (students and lecturers) just view and fill the academic data. But at a time (e.g. once a semester), about 12,000 students will access the site simultaneously. Due to limitation of resources, I have to build the server using free software (except for the operating system Windows 7, the university has been prepared). The hardware is also limited to the usual 4-core computers (eg, Ivy Bridge Intel Core i7-3770) with approximately 16GB of memory (DDR3 1600 MHz), equipped with an RJ-45 port (Intel 82 579 Gigabit Ethernet). With all these limitations, I have to choose the software (web server, database, etc) are appropriate for this purpose is achieved. I decided to create a site in PHP. Please help me by answering the following questions based on your expertise. (my prime candidate software to consider after googling) Web server which is faster & stable & secure, when implemented and optimized for PHP? And why? (nginx) PHP accelerator which is faster & stable & compatible with the selected web server? And why? (APC with Zend Optimizer+) Database which is faster & stable & secure, when implemented and optimized for selected web server and selected PHP accelerator? (MySQL) Are there any errors that have been or will be happening from my condition is? If there is, please enlighten me? Is there anything else I need to know in order to achieve this goal? If there is, please enlighten me? I understand that the performance also depends on the implementation of source-code program, so I assume it will create a site with the best efficiency (e.g. using AJAX).

  Read the article

• Upgrading .Net 2.0 to .Net 3.5

  - by tgandrews

  Will this require a reboot? Even if I include all the security patches as well.

  Read the article

• Aging SBS needs updates / Thoughts for one-off, off-line complete backup?

  - by tcv

  Hey guys, So, we checked out the status of an SBS 2003 at one of our more recent, spend-averse clients and found it to be woefully out-of-date. Scary out of date. I think it's running IE2. Ok, maybe not that far back. Anyway, I was thinking that I could use some kind of disk-imaging software to image the four IDE drives within and, in the event the server gets some kind of Update Induced Indigestion, I could completely restore. Usually my go-to software for this is Acronis, but my client will likely balk at a $500 price tag for a one-off backup with their server product. I had thought we could use the boot media from, say, Backup & Recovery 10 to take an off-line image of all the drives. According to their CHAT tech support, however, it will not work. I pressed for the technical reasons and they said they'd email me. They haven't emailed me. They still might. This server is running SBS 2003, pre sp2. It's got four IDE disks. One is a Basic disk, which contains the O/S. The others are bound as a dynamic disk. You might ask: "Don't they already have backup software?" They do! Backup Exec, a very low-end version that won't even do VSS. I don't know much about BE, but it seems to me that if the worst were to happen, it would mean building a new server O/S, installing BE (if the media is available), then restoring. Would it even work? I can take the system down for hours to do a backup and my goal here is a pretty dead-simple restore if the worst happens. Any and all suggestions are exciting. m

  Read the article

• Windows Server 2003 (as workstation) unable to write to Samba fileshares

  - by remyhorton

  Setup is a Samba fileserver under Linux, which i am trying to access from a Windows Server 2003 box which has been reconfigured as a workstation. I can log onto the fileshares and can copy/delete files, but trying to open a file then write to it fails. Renaming files also fails with an error about requiring a filename. Drag/dropping files onto Xemacs gives me a message about copying from the network zone, and once open the file is read-only. Any ideas of what is wrong? I suspect it is a miscommunication of security details, as folder security options are all unchecked (checking them has no effect). I know it is not a problem with Samba itself, as Window2000, WindowsXP, and Nautulas (under Linux) can all access/edit fileshare files fine using the same userid/password. I am not using domain logins.

  Read the article

• How to diagnose issue between mobo, RAID, and SSD cache drive? [migrated]

  - by goober

  Background This issue is happening on my custom-built desktop. Relevant specs: Motherboard: ASUS P8Z68-V PRO Utilizing Intel RST technology (application that uses unused SSD as cache) Processor: Intel core i7-2600k (not overclocked) HDDs: RAID1 of 2x Seagate Barracuda 1TB (ST31000524AS) (RAID performed via z68 chipset) Machine has run fine for ~1 year with no issues, and has been well-maintained (dust, etc.) What Happened Random Freezing issues -- intermittent Looked at the RST application screen to see that the acceleration cache was listed as "unavailable" -- recommended that I power down and reconnect the drive. Reconnected the drive to no avail. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Now, the freeze happens whenever loading something particularly data-driven (a video, a game, etc.) Steps Attempted Reconnected the drive to no avail. Updated Intel RST software to v. 11.6.0.1030 to see if that made a difference. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Connected the drive as its own volume. Formatted it, ran disk check errors -- all seems fine. Reconnected the drive and selected it again as the cache drive. Now, what happens when there is a freeze: Machine freezes I am unable to perform any command Screen then goes black I hit the reset button During boot, all drives show as "Disabled" and I am told no volume can be found I then hit the reset button (or power off/on) again. Either the next time (or sometimes after repeating this once more), the metadata cache is reconstructed and the system boots fine, showing the SSD as a cache. Question I believe this is an issue with the SSD itself, but how can I be sure since connecting it separately appeared to show no problems? I want to make sure it's not an issue with the motherboard, SATA ports, etc.

  Read the article

• AWS VPC - why have a private subnet at all?

  - by jkim

  In Amazon VPC, the VPC creation wizard allows one to create a single "public subnet" or have the wizard create a "public subnet" and a "private subnet". Initially, the public and private subnet option seemed good for security reasons, allowing webservers to be put in the public subnet and database servers to go in the private subnet. But I've since learned that EC2 instances in the public subnet are not reachable from the Internet unless you associate an Amazon ElasticIP with the EC2 instance. So it seems with just a single public subnet configuration, one could just opt to not associate an ElasticIP with the database servers and end up with the same sort of security. Can anyone explain the advantages of a public + private subnet configuration? Are the advantages of this config more to do with auto-scaling, or is it actually less secure to have a single public subnet?

  Read the article

• NFS on top of GFS2 - does it work?

  - by Matthew

  We're currently using a NoSQL derivative called Splunk to receive our data. The software supports something called "search head pooling" in which the job-dispatching engine is housed on several servers which share a common storage point. Originally our intention was to use a clustered filesystem like GFS2 because of low latency, stability, and ease of setup. We set up GFS2, and it's working with no issues. However when trying to run the software, it's trying to create lock files, and a bunch of other things that their support team can't quite explain. Ultimate feedback from them was that they only support NFS. Our network administration team heavily frowns on NFS (lack of stability, file lock issues, etc). So, I was thinking about the possibility of setting up NFS on each server in the cluster to act as a wedge layer between the GFS2 filesystem and the software. Basically configure each server to export the GFS2 filesystem's mountpoint via NFS, and then tell each server to connect to that NFS share. That way we aren't introducing any single-points-of-failure should a dedicated NFS server go down, but the vendor gets their "required" NFS share. I'm just brainstorming ways around, so please tear this apart :)

  Read the article

• Recommendations for good Unix MTA / groupware solutions? [closed]

  - by Jez

  Possible Duplicate: Exchange server replacement that runs on Linux I'm setting up a Debian server, and one of the things I need on it is an MTA. I don't want to use something like Exim or Postfix because I want something that ties in SMTP, POP3, and IMAP all in one (a la Microsoft Exchange). Most MTAs also seem to be hellishly difficult to configure. Try and read the Exim documentation; you could do a university degree on it (I'm not kidding). When you can get an HTTP server like Cherokee which is easy to configure and has a nice web interface, do MTAs or groupware solutions need to be that hard? I'm aware that some people think "the Unix way" is to have lots of different interacting pieces of software (like maybe an SMTP MTA, POP3 service, webmail service, and overarching manager to tie them all together), but I think this is a situation where that just makes things a lot harder to deal with and one large software suite fits in much more nicely. So, I'm looking for good open source software suites that will run on Debian that: Combine (at least) SMTP, POP3, and IMAP Are easy(ish) to configure Have a nice configuration web interface or GUI Are not defunct projects I don't mind if it's groupware and offers calendaring too, but I would only be using the e-mail functionality for now. Another nice-to-have would be built-in webmail (if we're combining a bunch of functionality, why not?) Note however that I do NOT need Outlook support. I am not really looking for an "Exchange replacement drop-in". The suites I've found so far that seem to match the above criteria (and have appropriate licenses) are Citadel, Kolab, and Zimbra. I'd appreciate anyone who has experience with any of these giving me the pros and cons of them, such as how easy they are to configure and what their performance is like. I'd also appreciate any other suggestions for solutions that fulfil my criteria that I may have missed out.

  Read the article

• Private VOIP network

  - by SuppositoryPlacebo

  I own a small private security services business. Some of my clients require 2-10 security officers per location. I'm trying to think outside the box in order to solve my communications problem. I'd rather not buy or lease hf radios or voip systems at the current rates. I'm wondering if there is an existing system, or if is at all possible, to setup a private communications network using only a server and bluetooth devices or a wifi/bluethooth combination. http://25.media.tumblr.com/tumblr_m44f0pn7BL1rwp6tgo1_1280.png I don't need "radio" per se. I just need a simple, private voip network. Is there an existing device that consists of nothing more than a wifi adapter to control a bluetooth device?

  Read the article

• How much free memory should I have on my webserver?

  - by neanderslob

  I have a webserver that's currently hosting two Wordpress sites and some java-based collaboration software. The server has 2G of memory and is currently using about 1.8G of the available memory. Right now what's on here is pretty much a pilot project that's getting negligible traffic so I think it's pretty clear that I'll be needing more memory. I was wondering, if I was to release it, how I might anticipate my memory needs based on the traffic it gets. I've poked around on Google and what I've found has been a bit tenuous. Is there a good heuristic that one should use when calculating memory demands as a function of the base (no traffic) load on the server? For reference, the output of free -m can be seen below: total used free shared buffers cached Mem: 2048 1832 215 0 0 0 -/+ buffers/cache: 1832 215 Swap: 0 0 0 To me this looks like actual memory used and isn't an illusion due to caching or anything else. I figure the demands of my collaboration software will have to be experimentally tested so here's free -m without that software running: total used free shared buffers cached Mem: 2048 1109 938 0 0 0 -/+ buffers/cache: 1109 938 Swap: 0 0 0 My plan B to figure this out is to add a bunch of swap space to the server, give it some traffic and adjust according the the amount that swap gets used. I was just wondering if anyone had a good rule of thumb to estimate how much memory I should plan on in advance...or if what I'm thinking is nuts. Many thanks in advance (I'm really quite new to this).

  Read the article

• debian dependencies (libssl-dev and libncurses5)

  - by RubyFreak

  I'm trying to install under RVM the Ruby Enterpise (REE) under debian My debian is squeeze (uname -r) 2.6.18-194.26.1.el5.028stab070.14xen i did try to install ree but it complains that it is missing libssl-dev and libreadline5-dev. I did update my lenny to squeeze, but i didn't update the kernel, since its a production server. The operational system is already updated and upgraded sources.list: deb http://ftp.de.debian.org/debian/ squeeze main contrib non-free deb-src http://ftp.de.debian.org/debian/ squeeze main contrib non-free deb http://security.debian.org/ squeeze/updates main deb-src http://security.debian.org/ squeeze/updates main I did try to install it using the following command: apt-get install libssl-dev libreadline5-dev But unfortunately i'm getting the following problems: The following packages have unmet dependencies: libreadline5-dev: Depends: libncurses5-dev but it is not going to be installed libssl-dev: Depends: libssl0.9.8 (= 0.9.8o-4squeeze1) but 0.9.8o-6 is to be installed E: Broken packages I was thinking to reinstall those packages and install again, but it has too many dependencies, and it is a production server, that i would like to know if there is any other way to fix it. Or at least to double check if it is necessary to reinstall both :-/

  Read the article

• Mcafee Auto-update from UNC path problem

  - by Vicky

  I have a network with 50 computers with no internet access. So instead of updating in each of them using dat file individually I tried to create a shared folder in server, and created a UNC in site repository. I downloaded the file DAT Package For Use with Mcafee AutoUpdate Architect & ePO 3.0 from http://www.mcafee.com/apps/downloads/security-updates/security-updates.aspx. When I try to update it is giving an error Error occurred while downloading file SiteStat.xml. So how fix it?

  Read the article

• Application that will identify percentage of your system disk bandwidth used on a user-application by user-application basis?

  - by Warren P

  I always (subjectively) feel my computer is far too slow (however fast it is), and so I'm always looking for ways to measure and understand what my computer is actually doing, that is making it seem "slow" to me. It has been my observation that my software-developer workload is most often disk-bound (I am waiting for Disk I/O) more than CPU bound. What has made it worse, is that I am using a corporate PC that has in-memory active-scanning anti-virus software that I do not have control over, and also some IT department mandated services that seem to suck up a lot of available hard-disk bandwidth. The best tool I have seen (in Windows 7) is the Resource Monitor which I usually acess from the button in the task Manager. The disk IO page, however, seems to label Disk Activity at a very low level (for example, showing the Volume Shadow Storage, which is flushing information obviously written by something ELSE other than VSS itself, and then writes to Pagefile.sys, which are obviously due to Virtual Memory faults in some application). What I would like to know is if a utility exists that can add up all direct disk input and output by user-level process, or find the process or service that caused VM or VSS activity. In that way, I hope, you could establish a real idea of how much of your computer's precious disk subsystem bandwidth is attributable to a particular application. here's a scenario: MyApp.exe writes 100k/s and reads 100k/s directly. VSS ends up writing another 100k/s. pagefaults caused inside MyApp.exe cause another 100k/s of writes. So the total "cost" of MyApp.exe running, during a period of time (let's say 1 second) is 400k/s, whereas you can only directly observe half of that, in Resource Monitor. Is there a smarter disk-IO watching piece of software I can use?

  Read the article

• List existing file server permission groups/users

  - by Patrick

  So we have taken over a new client and their existing file server is frankly a mess. We have migrated their old file server from a 2k box to a 2k8 DFS cluster and now I'm looking at rebuilding both the folder structure and their permissions. Unfortunately its been half done with AD groups (poorly named/no description/notes) and half with individuals named in security on the folders themselves. What I'm looking to do is to dump a complete list of all the folders with their security permissions (ideally I'd like to ignore files but not essential). CACLS got me half way there but fails with an odd error message and its output isn't particularly user friendly and I'm working with roughly 2Tb/250,000 files here so I really need something that gives me a bit more functionality. Question : does anyone have any experience of something similar/know of a bit of software that might help me out?

  Read the article

• Can I see if and when a file was deleted on Windows Server 2003?

  - by user316687

  On Windows Server 2003, is there a way to see if and when a file was deleted? It's a web server with IIS, our web application let our users to load Word documents into server. However, we found that one Word file is missing, and would like to know is it was deleted or never existed (web app could'nt load it). EDIT: I tried to follow this: Enable auditing the folder you want to keep track of. Just right click on the folder, go to “sharing and security”, then “security” tab, at the bottom click on “advanced”. Select the auditing tab, click add, select the group or users to track, then pick what actions you want to track. To track file deletion you would enable: Create files/Write data Success/Fail Create folders / append data Success/Fail Delete Subfolders/Files Success/Fail Delete Suceess/Fail This one will apply from now on, past actions wouldn't be able to track?

  Read the article

• Problem running application on windows server 2008 instance using amazon ec2 service and WAMP

  - by Siddharth

  I have a basic (small type) windows server 2008 instance running on amazon ec2. I've installed WAMP server on to it, and have also loaded my application. I did this using Remote desktop Connection from my windows machine. I'm able to run my application locally on the instance, however when I try to access it using the public DNS given to it by amazon, from my browser, I'm unable to do so. My instance has a security group that is configured to allow HTTP, HTTPS, RDP, SSH and SMTP requests on different ports. In fact I have the exact same security group as the one used in this blog, http://howto.opml.org/dave/ec2/ I did almost everything same as the blog, except for using a different Amazon Machine Image. This is my first time using amazon ec2, and i can't figure out what I'm doing wrong here

  Read the article

< Previous Page | 472 473 474 475 476 477 478 479 480 481 482 483  | Next Page >