Search Results

Search found 19676 results on 788 pages for 'hardware interface'.

Page 477/788 | < Previous Page | 473 474 475 476 477 478 479 480 481 482 483 484  | Next Page >

  • SAS disk performance drops a while after reboot.

    - by Flamewires
    So we have some workstations with identical hardware. The Fedora14 box has a couple weeks uptime and still get good performance. hdparm -tT /dev/sda /dev/sda: Timing cached reads: 21766 MB in 2.00 seconds = 10902.12 MB/sec Timing buffered disk reads: 586 MB in 3.00 seconds = 195.20 MB/sec The Cent 5.5 boxes however seem to be okay after a reboot, /dev/sda: Timing cached reads: 34636 MB in 2.00 seconds = 17354.64 MB/sec Timing buffered disk reads: 498 MB in 3.01 seconds = 165.62 MB/sec but some time later( unsure exactly, tested at approx 1 day uptime) /dev/sda: Timing cached reads: 2132 MB in 2.00 seconds = 1064.96 MB/sec Timing buffered disk reads: 160 MB in 3.01 seconds = 53.16 MB/sec drop to this. This is with very low load. I believe they all have the same bios settings. Any ideas what could cause this on Cent? Ask for more info. It might also be worth noting, that passing the --direct flag causes the slow boxes to perform similarly to the non-slow ones for buffered disk reads.

    Read the article

  • Black screen during startup

    - by Juanillo
    Hello, I've got a friend with a weird problem. When he starts his computer the screen is completely black untile the computer is completely started. So the screen is black until it suddenly shows the windows desktop. He said that this is happening since a technical service repaired his computer, but that repairment is not now in warranty. Recently the computer stopped working, but as the screen is black he cannot access to Bios or to secure start-up (by pressing F8). When he inserts the Windows Vista DVD the system doesn't boot from DVD (it musn't be configured in this way in the Bios.) Maybe there´s a problem with the hardware (maybe the graphic card). Can anyone explain a reason why the screen is black during start-up? Any idea of what to do with the computer to restore it? Thanks.

    Read the article

  • Allow access to printer between interfaces on Cisco ASA5510

    - by Jonas Stensved
    I have a Cisco ASA5510 where we have to separate networks on two separate interfaces. The networks have and should have nothing to do with each other except that network B needs to access a printer on network A. Network A: 192.168.137.0/24 Printer: 192.168.137.20 Network B: 192.168.0.0/24 I've added an incoming rule from Network A to the Printer IP in the ASDM interface but clients can't print. Our previous router was configured to let traffic through so the clients on Network B is already configured so it think it should work if the traffic is allowed. How do I let clients on Network B communicate with the printer?

    Read the article

  • Load balancing + NAT issue on BNT GBE 2-7 gear

    - by Clément Game
    Hi guys, I've got troubles configuring an Hardware load-Balancer with NAT functions. I have the following architecture: Internet === VIP (public) LB (private ip) ==== private addressed servers When a connection is initialised from the outside (internet) , the LB correctly forwards the SYN packet to one of the private servers. But when these servers want to reply with a SYN/ACK there is a problem. the initial SYN packet had as ip header : VIP = Private_server_Address But the private servers cannot reach VIP from their side (this is normal since it's nated), and then provide a correct reply. Have you guys any solution to correctly forward the packets to their correct destination ? Note: The load balancer, which is the default gw for the servers, also has a NAT rule for "masquerading" (actually more SNAT than real masquerading) Regards, Clément.

    Read the article

  • How Is A SAN Storage Device Managed? [closed]

    - by slickboy
    Apologies if this is a stupid question but my only previous experience with SAN technology is using a SAN virtualisation tool (StarWind iSCSI SAN Free). This tool comes with a management interface that allows for iSCSI targets to be configured on the simulated SAN that can then be accessed. My question is basically: How is physical SAN device managed? Is an operating system required to be installed on the SAN device and then managed via software? Or can it be managed remotely via an application with no OS on the device? Thanks for any help.

    Read the article

  • How to copy Netscape email

    - by Olav
    I think I have the Netscape mail-directory from old computer, how do I copy it to new computer? (Netscape 7.1 Mail, Thunderbird or Seamonkey). I think I have the files in Olduserbackup\xjuwtwtb.slt\Mail I create a new mail account with server pop.superuser.com, and find a directory with that name in C:\Users\myusername\AppData\Roaming\Mozilla\Profiles\default\ou6umlif.slt\Mail I replace the files with those from the backup, but Netscape still shows pop.superuser.com in its interface. Is there some kind of registry setting somewhere I will have to change?

    Read the article

  • monitoring load on AWS EC2

    - by hortitude
    I'm interesting in monitoring our EC2 instances to ensure we scale up when necessary. Right now we are monitoring idle CPU time as our metric. We aren't measuring disk IO as we are not a very disk intensive application. When running on our own hardware in a datacenter I also usually monitor "load" from the top command. My question is: Does it make sense to monitor "load" on a shared env such as EC2? If so, how do you interpret the results?

    Read the article

  • X200 Tablet notebook won't start after BIOS Update

    - by THEn
    I have LENOVO X200 Tablet and I ran the BIOS Update and the computer won't start after the BIOS update. When I ran the BIOS update utility it ran everything fine and asked to restart the computer but it wont start screen is blank. I unplugged the power and took of the battery and put them back and still not starting. Now it has [Power On] indicator light on and screen is not starting. I tried pressing F1 button while trying to start the computer but it doesn't do react to anything. Please help how I can start my Tablet. The update utility is http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-70651 Does any body know if X200 have any kind of hardware switch to reset the BIOS or any thing? What would be the best way to fix my BIOS? Thank you.

    Read the article

  • Can I get redundancy with a JBOD storage subsystem

    - by Dat Chu
    I have a Promise Technology J610S. This is a JBOD subsystem. Is it possible for me to buy a SAS hardware RAID controller and provide some type of redundancy for these drives? I am unsure whether I will use Linux or Windows yet so an answer with enumeration for both would be highly appreciated. One solution that I thought of was: if my J610s can export each drive as a target, my server will simply see 16 drives. The RAID controller can then perform the RAID5/RAID6 if I want.

    Read the article

  • Is it possible to have a portable plotter that can print QR codes on burlap?

    - by Brian Ballsun-Stanton
    This is a hardware question. Is there a class of plotters that are portable and accept sharpies? The use case: I have a burlap sack. It will be taking very specific potsherds from an archaeological dig. It needs an indelible QR code (or bar code) printed on the burlap. (Stickers have far far too short a lifetime). It was my thought that a plotter that uses sharpies and that works in the field would be the optimal solution for this problem. Is a portable plotter the right solution? If so, who makes them? If not, what is a better solution?

    Read the article

  • Default Webcam Driver Issues

    - by Omegaclawe
    I'm having troubles getting my monitor-attached webcam (ASUS VK248H) to install on my new computer. On the old computer, it was a matter of not using a USB 3.0 port, but I can't get anything to work on the new one. I have tried all manner of uninstalling/reinstalling the driver and resetting the computer, as well as literally every USB port on the computer (14 in total). It's not that windows isn't recognizing the device; it most certainly is. However, comparing it to the old computer's driver details, on the new computer, it is not using the ksthunk.sys driver in addition to the usbvideo.sys driver, like on the old (working) computer. Naturally, I figured the way ahead was to simply get this other driver to work with the hardware, but haven't really found out a way to do that. Does anyone know of a way I can force it to use ksthunk.sys? It seems rather difficult to get it to install anything when Windows is feeling that everything is peachy.

    Read the article

  • Taking over and Moving a PHP site

    - by KCavon
    I have a internal use PHP site at my new position. It only runs a few days a year off site so we keep it on laptops. The hardware it has been on, a 8 year IBM Thinkpad running Fedora, is dying. I have new Lenovo Thinkpad's running latest and greatest Ubuntu. I have copied the contents of var to a shared drive, renamed the old www folder in var on the new machine and copied over the old www folder. I can get to the login page and into the site, but when I look something up it returns Cannot Open. I know I cannot get to the MySQL in the new machine because users and passwords dont match. The version of the PHP from the old machine is before the setup script was included. I know very little about PHP. I am looking for input on the proper way to link the old PHP files to my mysql instance. Any help, much appreciated.

    Read the article

  • How can I combine non-identical disks efficiently?

    - by Odys
    There are some not-identical disk of various capacities that I want to combine (somehow). Since there are no duplicate models, I can't use raid between none of them. Is there a way to use them efficiently while being safe? What I have in mind is a software that will use them as if it were Raid-5 or something. I really don't care about max speed. I want in the end to have as less logical drives as possible. Also, I don't mind spending some money on hardware, if needed.

    Read the article

  • How to troubleshoot memory card read?

    - by shinjin
    The built in memory card reader in my laptop mounts SD cards as read-only only. This happens both in Windows 7 and Ubuntu. Most of the time. Ever now an then it works. After a some non-deterministic combination of uninstalling/reinstalling/disabling/enabling of the driver with the mandatory reboots the card reader works for a while. Is there any sane way to troubleshoot if it's an actual hardware problem, or just a matter of drivers? I've tested it with several SD cards, that work just fine in other devices. System: Acer Aspire 8951G, Windows 7-64bit

    Read the article

  • Windows 8 will only recognize the Blu-Ray drive, if the Windows 8 disc is present at boot time

    - by aceinthehole
    If I have the install disc in the Blu-Ray ROM drive at boot time and subsequently remove the disc and replace it with Blu-Ray media, everything functions as I’d expect. However, if I have no media present, or another disc in the drive at boot time, then Windows 8 does not seem to recognize that the Blu-Ray player is even present in the computer. It is not present in My Computer, the Device Manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expected, but what is it about having the Windows 8 install disc in the drive or not that would cause this kind of behavior?

    Read the article

  • My Network adapter "D-Link DWA-547" is causing windows 7 to freeze up.

    - by Anders
    Any audio playing, and sometimes the program i am using is constantly stuttering and freezing up. I have narrowed the offending hardware down to my: D-Link DWA-547 RangeBooster N650 Desktop Adapter If i disable it in the device manager everything runs fine and smooth. The card works, and gives me super fast internet. But the rest of the system hangs. I have tried installing the card with the drivers from the cd that came with it, i also tried the lates beta drivers from the d-link webpage, but the problem persists. What do i do? I am running windows 7 x64 on a asus p5b motherboard with 2 intel processors.

    Read the article

  • How can I make my Virtualbox Vista see my USB device (iPad)?

    - by phil
    I have the latest VirtualBox. I have filters for the iPad. But it does not show up in my virtual Windows vista My Computer screen or virtual iTunes. When I try to right click the little USB icon and select it it says it failed because the device is busy with a previous request Result code: E_INVALIDARG (0X80070057) Component: HostUSBDevice Interface: IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a} Callee: IConsole {515e8e8d-f932-4d8e-9f32-79a52aead882} Any help is greatly appreciated Note: running 64bit Windows Vista Virtual on a 64bit Windows Vista (Home Premium) EDIT: my iPad is in recovery mode, maybe why it can't be seen in virtualbox? Also my host is running Zonealarm firewall and Microsoft Security Essentials. In addition the guest has AVG antivirus. Could those programs conflict with virtualbox?

    Read the article

  • Need help upgrading MacBookPro3,1 RAM to 4GB.

    - by Fantomas
    My questions are: 1) Where to buy it and what to buy? I have heard that this RAM is generic enough and it does not have to come from Apple. 2) Can I reuse my existing stick(s)? Would I have a single 2GB module, or 2 x 1GB modules? 3) If I have 2GB already, is it a good idea to have one old stick and one new one? Which one is better placed at the top and which one at the bottom? Let me know what questions you have. My computer's info: Hardware Overview: Model Name: MacBook Pro Model Identifier: MacBookPro3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 4 MB Memory: 2 GB Bus Speed: 800 MHz Boot ROM Version: MBP31.0070.B07 SMC Version (system): 1.16f11

    Read the article

  • seamless mode remote desktop connection from linux to windows

    - by mateusz.fiolka
    I am a programmer using Linux as my main OS, however sometimes I need to use windows (ie, office, ea). I'm running qemu with kvm to access the windows "machine". I would like to achieve something that is described here: https://help.ubuntu.com/community/SeamlessVirtualization (It means I would be able to run chosen applications on Windows and then display them locally on Linux as separate windows achieving good desktop integration). However seamless rdp is buggy and doesn't work on my machine (probably because I'm using a tiling window manager and a 64bit system). Are you aware of any other solution then rdp seamless mode? I would prefer to still use quemu because it uses cpu hardware virtualization, so different protocol/client combination would be preferable.

    Read the article

  • Windows DFS Limitations

    - by Phil
    So far I have seen an article on performance and scalability mainly focusing on how long it takes to add new links. But is there any information about limitations regarding number of files, number of folders, total size, etc? Right now I have a single file server with millions of JPGs (approx 45 TB worth) that are shared on the network through several standard file shares. I plan to create a DFS namespace and replicate all these images to another server for high availability purposes. Will I encounter extra problems with DFS that I'm otherwise not experiencing with plain-jane file shares? Is there a more recommended way to replicate these millions of files and make them available on the network? EDIT: I would experiment on my own and write a blog post about it, but I don't have the hardware for the second server yet. I'd like to collect information before buying 45 TB of hard drive space...

    Read the article

  • Is HDCP working for ATI/AMD cards on windows 8?

    - by Joel Barsotti
    I have an AMD 6950 and am running windows 8 RTM. I've tried the Catalyst 12.8 drivers and the 12.9 beta drivers. With either drive HDCP seems to be non operational. I've got two dell monitors, one a u2410 and the other a 2408wfp. Both were previously identified as supporting HDCP in windows 7 with the same hardware. I've tested the monitors individual on both DVI and display port, and neither one works. I'm using cyberlinks BD-Advisor to test. My end goal is getting the DirecTv2PC app working again, which is by cyberlink for DirecTV, and requires HDCP. Currently it shuts off when you start playing a recording.

    Read the article

  • How to change Winamp's default skin to Bento?

    - by glasnt
    If I install Winamp through automated means (e.g. Using http://ninite.com/), it is automatically installed using the default 'boxy' skin. I can't work out how to interface with this skin as easily as the new 'Bento' skin. In addition, there doesn't seem to be an option to download the Bento skin, or change the skin from Default to Bento without uninstalling and reinstalling it again. Is there a menu option or a downloadable skin that is the default Bento skin? Or do I have to re-install to get this 'new default' skin?

    Read the article

  • Two SSL certs for a domain in DirectAdmin

    - by Bart van Heukelom
    If I were to get 2 SSL certificates, one for example.com and one for www.example.com, is there a way to install them both on the site example.com in DirectAdmin? The default interface only allows installing one for both versions. If not, can I separate the 2 domains into 2 sites? One of them would only be a redirection, so there wouldn't be any duplication of site files. (Please don't answer with "one certificate should work for both". It doesn't always. This is a DirectAdmin question)

    Read the article

  • How can I share data from a Samsung Wave Mobile phone with the Mac OS?

    - by M. Bedi
    This is driving me up the wall just a bit. I have a new Samsung Wave mobile phone. It is running the Bada OS. The mobile phone does not come with anyone software for the Mac. The Kies desktop interface is only available for Windows. I did try installing the Kies software in a VM with Parallels 5 but it did not detect the phone connected via USB. I tried using Bluetooth file exchange on the Mac; it lets me browse the file system on the Wave phone but not actually see any of the media files; I just get empty directory views. But I am able to access files using media sharing with the Wave phone and my PS3. So what would be a Mac desks top app that can be used a media sharing browser?

    Read the article

  • Cisco access list logging. Why is there a difference between IPv4 and IPv6?

    - by growse
    I've got a Cisco 877 router. I've got an IPv4 access list and an IPv6 access list set up and configured similar to this: interface Dialer1 ... ip access-group INTERET-IN ipv6 traffic-filter IPV6-IN Each of these access lists has a final rule of deny ip/ipv6 any any log. However, in my syslog I notice that there's a difference in formatting between the two types of entries. IPv4 will say: %SEC-6-IPACCESSLOGP: list INTERNET-IN denied udp 88.89.209.63(137) -> 1.2.3.4(137), 1 packet Whereas the IPv6 list will say %IPV6_ACL-6-ACCESSLOGNP: list IPV6-IN/240 denied 59 2001:0:5EF5:79FD:14F9:B773:3EBA:3EE3 (Dialer1) -> 2001:800:1000:0::1, 8 packets Both have broadly the same information, but the IPv6 log entry is missing the protocol type and port, both of which are very useful if I'm trying to troubleshoot connectivity. Why is this? How do I get IPv6 deny logs to display the protocol and port used, if any?

    Read the article

< Previous Page | 473 474 475 476 477 478 479 480 481 482 483 484  | Next Page >