Search Results

Search found 19676 results on 788 pages for 'hardware interface'.

Page 473/788 | < Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >

• Linux IPv6: DHCP and /127 prefixes

  - by Jeff Ferland

  I've tried multiple pieces of DHCP client and software in attempting to setup a solution for allocating a /127 prefix to virtual machines so that each maintains its own layer 2 isolation. Because there would only be one host assigned to each network, a /64 is impractical. While the prefix size could reasonably be somewhere in the /64-127 range, the crux of the problem has been the same regardless of the software used in configuring: the DHCP call to bring up the interface uses the address advertised by DHCPv6 and inserts two routes: the /127 given by the router advertising packets and a /64 as well. Any thoughts on why I'm getting the additional route added across dhcp client vendors?

  Read the article

• Is there any two-panels bookmarks manager for Google Chrome?

  - by L. Shaydariv

  Hi to all. I'm just wondering, is there any two-panels-interface (like Total Commander, File Manager, etc) bookmark manager, extension, etc for Google Chrome? Using of the default bookmark manager is not so suitable because of two reasons: 1) I've gathered a very large collection of bookmarks (please, don't ask why) 2) bookmarks hierarchy tree always expands its branches when the bookmark manager is open (this makes the moving of bookmarks through the bookmark tree much and much harder). I tried to use Link Commander but it's very and very slow. Any suggestions? Thank you for advices.

  Read the article

• Distribute outgoing connections among multiple IPs configured on the same NIC

  - by cedivad

  I have a NIC with 2 aliases on it. The network interface has 3 IPs configured on it. Think about it like this: i can ping the same server by hitting .100 .101 and .102. I want the source address of the outgoing connections to be distributed among these ip. So if i have 3 opened connections, one connection will have result as having an IP address ending with .100, the other two should result as having as ip addresses .101 and .102. I'm using FreeBSD but I think this question to be Linux-Like wide.

  Read the article

• ARP replies contain wrong MAC address

  - by Jayen

  I've got a robot running linux with wired and wireless adapters. When I boot up, it connects to the wireless fine. When I assign an IP to the wired (either statically or with DHCP), it looks like it works. As in, ifconfig shows a proper IP and route shows proper routes. However, when I do an ARP request of the wired IP, the ARP reply contains the wireless MAC. ??? There's no bridge running on the robot, so why don't I get the wired MAC??? When the wire is disconnected, the wired IP replies to ping... Why is the robot replying over the wireless interface to IP requests on the wired???

  Read the article

• How to enable RDP to a Server 2008 R2 on another network? VM network

  - by Saariko

  I have a W2008 R2 installed on a different network (I am on 192.168.0.x - new server on 192.168.3.x) I had trouble ping and RDP to it. I disabled the firewall to test the connection: and that opened the ping feature but I still can not RDP to that machine. the allow remote access is enabled As per sinni80 idea - Here is the error message The networks are divided by a Fortigate 60-B router - 2ndy interface for the gateway is 192.168.3.254 (and pingable from all) any to any rule on both networks is in place. As per Joe Schmoe idea - I am able to RDP to 192.168.3.1 from 192.168.3.3 (which is on the same network) Data to add: - The servers are on a VM host, each of the servers has 2 nics one is DHCP enabled into the 192.168.0.x network 2nd is static IP in the 192.168.3.x -- Further information: The network 192.168.0.x - are on a domain network (active Directory) The network 192.168.3.x - are grouped in a workgroup What should I check more please?

  Read the article

• How to set up my network/bridging using Apple Airport equipment?

  - by John

  I'd like to set up my network like this, and I want to make sure it's possible using the hardware I have. I think it should be... I've got my cable modem in one room. I want to plug it into an Apple Airport Express and create my wireless my wireless network here. The airport express will do the NAT and DHCP. By my TV there are a few things to be networked (Xbox and Tivo). I have an airport extreme here. I'd like to have the airport extreme join the wireless network and share the connection to the ethernet ports. Can anyone provide some assistance on the best way to configure to do this? Thanks!

  Read the article

• Django freezes when adding objects through the admin

  - by Quartz

  I have a Django 1.1 website running via Apache/mod_wsgi with a PostgreSQL 8.3.1 database. Recently, when I added objects through the admin interface, the connection froze up and I lost several worker processes, so I had to restart Apache. Upon trying to replicate this, I found that it only happens through the admin: if I go into the Django shell and issue the same insert, it works fine. Also, performing an UPDATE operation works without issues, so just INSERTs. I've rebuilt indexes on PostgreSQL and run a full VACUUM. Error logs don't show anything, and I can't figure out for the life of me what's wrong. Anyone have any ideas?

  Read the article

• How to make routes on a windows 7 laptop persistent?

  - by askvictor

  I have a number of (windows 7) laptops that normally connect via wireless. We also have a wired network for special purposes. When one of these laptops plugs in to the wired network, at the moment, it makes the wired network the default route. Instead, I would like it to keep the wireless network the default, and route only 10...* through the wired. I can achieve this with: route delete 0.0.0.0 IF 22 route add 10.0.0.0 ... IF 22 (where IF 22 is the wired network interface). But how can I get this to stick? Currently, if the wired network is unplugged then re-plugged, it grabs the default route again. So I want a way of making the wireless network not get the default route, and to make the 10...* network persistent. Is there a hook to run commands after a network connection is established in windows? In linux I would use post-up hooks.

  Read the article

• Website filtering for OpenVPN clients

  - by Asche

  I am currently trying to block some websites by their domain names for all the clients of my OpenVPN server. My first idea was to use the /etc/hosts file. But, its effects seem to be limited to the host only and not to be taken in consideration by OpenVPN. I then tried to configure bind9 and to interface it with OpenVPN, but that solution was unsuccessful and uneasy to use. After this, I considered using iptables to drop all the packets from/to those websites but that forum thread made me thought otherwise since iptables' behavior with FQDN may generate complex issues. Have you got a solution to block websites for all clients using an OpenVPN server on which I am root?

  Read the article

• ASA 5505 8.4 open ports for subnet

  - by fwrawx

  I have an ASA 5505 running 8.4 with its outside interface plugged into our internal network. I want to open up access to hosts on one of the vlans behind that ASA to hosts on our internal network. I was just starting to grasp NAT on our older PIX but the ASA 8.4 has me confused now. Given a clean ASA with an outside vlan of 10.0.0.1/24 and test vlan of 10.0.1.1/24 what's the basic configuration needed to allow any hosts on the outside network to have access to any of the hosts on the test network?

  Read the article

• How anti-virus on the host machne affects performance of virtual machines?

  - by Ladislav Mrnka

  I'm diagnosing some issue with Oracle virtual box where virtual machine sometimes perform terribly slow (much slower then notebook with worse configuration): Notebook i7 (2 cores with HT = 4 logical CPUs), 4GB RAM, 5400 rpm disk, Win 7 64bit Virtual machine (Oracle Virtual Box) Host: i7 (4 cores with HT = 8 logical CPUs, 12 GB RAM, system runs from SSD, virtual machine from 7200 rpm disk, Win 7 64bit) Virtual machine: 4 cores assigned, 8 GB RAM assigned, Win 2008 R2 Enterprise (64 bit) Virtual machine uses bridge to separate network interface (machine has two) VPN for network communication No other virtual machine runs on the host Host has installed ESET Smart Security All SW is updated with last version. My question is if anti-virus on the host machine can somehow affect performance of the virtual machine and if so how can I turn it off without turning the anti-virus itself?

  Read the article

• Netgear VPN can't access specific server

  - by Critologist

  I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect and ping the remote router and a few other things on the network. However, I can't ping or connect to my call recorder. If I move outside of the office network (i.e. connect directly to the cable modem or via a mobile hotspot), I can connect and ping the call recorder just fine. The office has a simple Linksys WRT54G router and is using AT&T Uverse. The remote location is using Charter Cable with a Netgear FVS318N. Has anyone ever encountered anything like this before? I've setup an identical VPN previously for a different client using similar hardware and never encountered this. Thanks in advance!

  Read the article

• windows 2003 - why can't serial port be accessed remotely?

  - by Danny Staple

  we have recently installed the updates on some of our servers, which have a bit of hardware attached via USB that presents itself as a serial (COM) port. The strange behaviour is that if I start a cmd shell on the server via VNC, I can open the serial port. If I run a service and start it from there (telnet, jenkins) then I receive a "not found" error for it. IE: C:\Documents and Settings\some_user>echo 1 >COM4: C:\Documents and Settings\some_user> on the local cmd will work, and on the remote telnet will give: C:\Documents and Settings\some_user>echo 1 >COM4: The system cannot find the file specified. C:\Documents and Settings\some_user> I cannot see any security settings on the Device manager settings panel for this device.

  Read the article

• Looking at desktop virtualization, but some users need 3D support. Is HP Remote Graphics a viable solution?

  - by Ryan Thompson

  My company is looking at desktop virtualization, and are planning to move all of the desktop compute resources into the server room or data center, and provide users with thin clients for access. In most cases, a simple VNC or Remote Desktop solution is adequate, but some users are running visualizations that require 3D capability--something that VNC and Remote Desktop cannot support. Rather than making an exception and providing desktop machines for these users, complicating out rollout and future operations, we are considering adding servers with GPUs, and using HP's Remote Graphics to provide access from the thin client. The demo version appears to work acceptably, but there is a bit of a learning curve, it's not clear how well it would work for multiple simultaneous sessions, and it's not clear if it would be a good solution to apply to non-3D sessions. If possible, as with the hardware, we want to deploy a single software solution instead of a mishmash. If anyone has had experience managing a large installation of HP Remote Graphics, I would appreciate any feedback you can provide.

  Read the article

• How should I troubleshoot a problematic wireless connection on Linux?

  - by Gearoid Murphy

  I recently purchased a netgear 150 usb wireless dongle for use with my 11.10 Xubuntu amd64 system. Using the network-manager interface, I can see local wireless networks and enter the authentication details for my local wireless lan. Unfortunately, the connection does not seem to work, I keep getting notifications that my wireless has disconnected (but none indicating that I've connected). When I examine syslog, it seems to indicate that I've successfully associated with the wireless switch and that dhcp has successfully acquired an ip address but the log shows that the dhcp process keeps sending requests, eventually dropping the connection. 'ifconfig wlan0' never shows the dhcp address logged in syslog. I suspect that the problem lies with the usb dongle, my configuration or the wireless switch but I am not certain how to isolate the problem, can anyone provide some insight on how I should go about homing in on the cause of this problem or verifying the functionality of the individual components, thanks.

  Read the article

• Solaris x86: Non working keys on keyboard (<, >, #, |)

  - by Thomas

  Hello everyone, I have a new installation of Solaris 10 10/09 on x86 hardware. The attached keyboard has a normal German layout. The system is configured accordingly by 'kbd -s'. The generic keys (letter, number, umlaut) work fine. Unfortunately some keys like <, , | or # do not. They produce no output on the text console at all. I tried PS/2 and USB keyboards. I cannot test it under X11 as it is currently not working. Thanks.

  Read the article

• Macbook Pro (SantaRosa) internal display not detected by graphics card, external monitor OK

  - by BLAU

  My MacBook Pro (2.4 Ghz, Santa Rosa with infamous nVidia card) acts strange. It shows the normal gray screen with Apple logo and animation flawlessly during start up but the internal display goes black without any rendering at all when all is loaded. (shining a light on display show nothing) If an external monitor is connected through the DVI port it will remain black during start up and then show the desktop as the internal display goes black. This happens both while booting to Mountain Lion and Windows XP. I have checked "About my Mac" and only the external display is listed. The same is the case if I use the nVidia Control panel in Windows XP. My questions: Is this a hardware problem or is it related to software maybe even firmware? What controls the display during start up, graphics card or something else?

  Read the article

• Can I use the voice & SMS features of my GSM SIM through my laptop?

  - by i..

  My laptop (a Lenovo T410s) has an internal GSM modem (device manager calls it a Qualcomm Gobi 2000 HS-USB Modem 9205) that I'm currently using a regular (voice, data, text, etc) 3G SIM in. The data functionality works great through the Lenovo software & Windows 7 but I was wondering if I can use the other features (specifically voice & SMS) through Windows. Is it posisble to use the non-data features of my 3G SIM through my Qualcomm GSM modem? If so, what software is available to this end? If not, where is the restriction? (e.g. hardware, OS, driver, software) Thanks!

  Read the article

• What rights does an employer have to the employee's computer?

  - by Terrence Brannon

  What access rights should an employee grant an employer for a work computer? For instance, let's assume that the business people come to the IT lab late at night for discussions with the CIO and they use my computer for reading email and general web surfing. In a sense, this means that they are taking full or partial responsibility for any security issues that crop up that get traced back to the employee's machine. Perhaps the proper way to provide a computer to an employee is to give him full and exclusive use of it while employed. Only supervised access (such as hardware/software maintenance) should be acceptable.

  Read the article

• Cable installed - now my hub has no connection the router/modem - what do I need to buy?

  - by bcmcfc

  My previous setup was as follows: [modem/router]------[switch]+------ [pc1] +------ [pc2] I've just moved and had cable installed and I no longer have the option of running a lengthy LAN cable from the router to the switch to provide network and internet access to the two PCs. The cable company provided 2 wireless N USB adapters. What do I need to buy to plug into where in order to restore the network to its previous state? PC1 dual boots Windows 7 and Ubuntu 12. PC2 runs Debian 6. Edit: USB adapters - Netgear WNDA3200 Switch - TP-Link TL-SF1008D 8 port Ethernet switch Cabling - various patch cables cat5e rj45 Modem/Router - pretty standard cable company job - wireless Intention is something like- [modem/router] --wifi-- [some-new-hardware or perhaps to pc1] ----[switch]---[pc1/2]

  Read the article

• Team City Backup from Rest API doesn't backup

  - by ChrisFletcher

  I'm using the REST API in Team City 6.5 to request a backup is created as follows: http://teamcity:8111/httpAuth/app/rest/server/backup?includeConfigs=true&includeDatabase=true&includeBuildLogs=true&fileName=filename as specified in the documentation here: http://confluence.jetbrains.net/display/TW/REST+API+Plugin#RESTAPIPlugin-DataBackup The problem is that it simply returns "idle", as does the backup status call and no backup appears. I can backup fine from the web interface and I can return a list of users from the REST API without issue also. I'm starting to suspect there is some sort of permission or config option but I can't find one.

  Read the article

• What has changed to make it possible to develop USB3.0

  - by RoboShop

  Like I know the transfer speeds are vastly different. But I don't understand is why they are faster. And why couldn't they have implemented USB 3.0 when they released 1.0? Like what technical breakthrough was required to get transfer speeds that fast? Was it cost? capacities of computer? like they couldn't read the data fast enough? Although USB is still well below hard drive transfer speeds engineering breakthrough? They found some new material which could transfer at a faster rate? Was this in the cable itself? In the hardware?

  Read the article

• What's causing "shutdown state" after TFTP reloaded Cisco `running-config` on 871?

  - by xtian

  Cisco CCP Write Configuration borked my 871w config while I was trying to setup port forwarding. I tested the 871's flash memory with fsck and rewrote the minimal config for TFTP (which is the same for Cisco's CCP app.). Thne, I successfully uploaded a previously working running-config from Win Vista using SolarWinds TFTP Server, unfortunately the restore was not entirely successful. The old running config was saved to the 871's startup-config and I can login using console port. Some other things that are working are the hostname and welcome message but that's about it. Startup shows an error SETUP: new interface NVI0 placed in "shutdown" state after tftp. The missing light on the access point modem for ethernet link show the 871'a outside FE4 is not working. SO...what's the possible problem with reloading a previously working config (approximately 4 months with the same config) via TFTP? Is there something I can look for on the 871 to verify the config?

  Read the article

• Suggestions on providing HA access to an external (fibre) RAID subsystem

  - by user145198

  We are looking at upgrading our storage capacity with an external RAID subsystem that has redundant (2) fibre controllers, each controller has 4 x 8 Gbps fibre ports. I would like to make access to this storage system occur via HA Linux. Ideally I would connect 2 fibre ports from each controller into each Linux server, and then export either NFS or iSCSI via a 10 Gbe interface. I have seen plenty of references to DRBD, however all of those references tend to use block storage that is solely attached to each machine, rather than having a shared block storage device, so I am unsure if DRBD could (or should) be used in this case. Ideas?

  Read the article

• Can't ping IPs for devices not part of Windows Domain

  - by GiddyUpHorsey

  I have a home network with a Trendnet wireless router and a Windows Domain. The DNS server is on a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. All machines either have a fixed or DHCP allocated IP on the 192.168.0.* subnet. How do I configure the DNS server or the Windows Domain so that Windows machines can see the iPhones?

  Read the article

< Previous Page | 469 470 471 472 473 474 475 476 477 478 479 480  | Next Page >