Search Results

Search found 25660 results on 1027 pages for 'booting issue'.

Page 485/1027 | < Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >

• Our wi-fi at work is ridiculously slow, will adding more range extenders improve it?

  - by john

  At work, we have two wireless networks (e.g., Work1 Work2); the Work2 is used downstairs and Work1 is used upstairs. However, both are notoriously slow. The connection is better when we are wired in, but unfortunately due to our building being very old and our company growing very fast, most employees are not seated near the walls where the ethernet cables are. I had Cox, our ISP, run a bandwidth utilization test and it doesn't seem like we are capping out on upstream/downstream, which leads me to believe that it's strictly an issue with the wireless networks (which were implemented before I got there). The wireless networks are both Apple Airport Extremes. Is there anything I can do to improve the situation for everyone? Speeds are extremely slow, and sometimes drops out.

  Read the article

• Desktop icons disappears when Nautilus is launched, until next boot

  - by Santosh

  What happens: When I log in into my Ubuntu everything is normal, I have some icons on my desktop and I can see them at this point of time. As soon as I click on the explorer (nautilus) on the Launcher bar, everything goes (disappers) and never comes. No matter how many time you click on the launcher, you can't open nautilus. I tried opening nautilus from the terminal, get the following: santosh@santosh:~$ nautilus Initializing nautilus-gdu extension ** (nautilus:2158): DEBUG: SyncDaemon already running, initializing SyncdaemonDaemon object Initializing nautilus-open-terminal extension (nautilus:2158): Gtk-CRITICAL **: gtk_action_set_visible: assertion `GTK_IS_ACTION (action)' failed (nautilus:2158): Gtk-CRITICAL **: gtk_action_set_visible: assertion `GTK_IS_ACTION (action)' failed Segmentation fault I suspect on "Segmentation fault" on the last line, whats that? I was amazed when I run this command in sudo.: santosh@santosh:~$ sudo nautilus Initializing nautilus-gdu extension ** (nautilus:2216): DEBUG: Syncdaemon not running, waiting for it to start in NameOwnerChanged Initializing nautilus-open-terminal extension (nautilus:2216): Gtk-CRITICAL **: gtk_action_set_visible: assertion `GTK_IS_ACTION (action)' failed (nautilus:2216): Gtk-CRITICAL **: gtk_action_set_visible: assertion `GTK_IS_ACTION (action)' failed Nautilus-Share-Message: Called "net usershare info" but it failed: 'net usershare' returned error 255: net usershare: cannot open usershare directory /var/lib/samba/usershares. Error No such file or directory Please ask your system administrator to enable user sharing. As soon as I type sudo nautilus and hit enter, nautilus starts and the desktop background changes (to the default which ubuntu has). Don't know why but at this point as soon as I click on Desktop (from the left pane) then nautilus closes. Did anyone has same issue? I am corrently working with commandline to do my work and its a big pain. Additional Information: Another thing I have noticed that when I want to open the location of PDF file I am reading in document viewer (by clicking the folder icon). It gives error "Could not open the containing folder" and "Failed to execute child process "nautilus" (Permission denied)". Any idea?                

  Read the article

• Windows 7 Audio tracks messed up

  - by Crash893

  I'm not an audio guy so it might not be the most articulate description of the problem I'm having but it seems like ever since I went to Windows 7 some video (netflix and some youtube) the background track (music sound effects etc) plays appropriately but the foreground track (i.e. the actors and/or narrator) barely comes in at all Right now I have just a simple set of PC speakers and some times a pair of headphones that plug into the PC speakers (no fancy 5.1) I've looked at every setting I can think of but I can't find anything that could be causing this Ive uninstalled the driver and reinstalled and I still get the same results so I think its a software issue any ideas?

  Read the article

• How could two processes bind onto the same port?

  - by Matt Ball

  I just ran into an issue where a request made to localhost:8080 from curl was hitting a different server than the same request made from inside Node. lsof -i :8080 revealed that two processes were both binding onto the same port: COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME node 51961 mball 14u IPv4 0xd980e0df7f175e13 0t0 TCP *:http-alt (LISTEN) java 62704 mball 320u IPv6 0xd980e0df7fe08643 0t0 TCP *:http-alt (LISTEN) How is this possible? Were they binding onto different interfaces? Or was it the IPv4 vs 6? If you're curious, node was hitting the other node process, curl was hitting the java process. The java process was started after the node process.

  Read the article

• What am I (a beginner) losing, by choosing Cherokee over Apache for serving dynamic content?

  - by Bad Learner

  I am a complete beginner and am planning to setup a photo sharing site. This is the setup I am planning, basically for a start - - Cherokee (instead of Apache) for serving dynamic content (python-based application), and Nginx for serving static files. Since, I am a beginner, what have I, to lose? So, can someone, from your experience, please tell me, what I'd lose by choosing Cherokee over Apache for serving dynamic content in PHP/Python/whatever? Anything other than the fact that there's lot of documentation, many people who can help when there's an issue etc as Apache is well established and the most popular web server? Again, my intention is not to spurt a flame war here. Just wanted to know if Cherokee would be better than Apache in terms of performance, reliability, and speed, when it matters (peak load times). Also, I heard it's a lot faster than Apache in serving dynamic content, is it true?

  Read the article

• Ubuntu 11 and 12 initially fast but later bogs down, CPU pegged

  - by uos??

  I started with Ubuntu 11 a few weeks ago. It's on a DELL M4300 with a OCZ SSD. Default setup, except that I've installed the proprietary NVIDIA graphics and BROADCOM wireless drivers. Dual boot with Windows. If I cold boot into Ubuntu, it is very fast, just like the Windows experience that I'm used to. But SOMETHING happens, and I haven't yet determined what, but the system gets incredibly slow and stays that way. At first I thought it had to do with Adobe Flash because it seemed to be triggered by sites with Flash. But then I removed Flash and the problem remains. I thought it was just an overheating problem, but I've now upgraded to 12.04 which supposedly fixes the overheating problems I've read about. Perhaps the heat situation was brought on by Flash in my early cases? So I installed Jupiter for CPU management, but the thermometer reports a familiar Windows-side temperature of 53 degrees Celsius. Switching Jupiter to lower performance doesn't help. When I check the System Monitor application, sorting by CPU usage, there are no obvious problem processes. However, in the graphs tab, both CPU cores are pegged at 100%! I notice that the slowness seems to be similar to the extremely bad performance I got prior to installing the NVIDIA drivers. I'm not sure if that helps. This is the strangest part to me - although the temperature seems OK, even after rebooting, the system remains slow - starting with GRUB2 which is very noticeably delayed, all the way through to either Ubuntu or Windows! That's right, even the Windows side suffers effects and takes several minutes to complete booting whereas normally (with my SSD) it's ready to use in 15 seconds. The only way to fix it is to shutdown and let the parts cool down. Or maybe it just needs to completely power off and boot rather than a soft reboot, temperature has nothing to do with it? - is that possible? But know that I have never had this problem in Windows, even if Windows gets very hot (135 F) a reboot would be enough time for it to recover. For this reason, I don't think it's a heat thing, but I can't imagine what else could be surviving the reboot. I'm entirely updated - there are no pending updates. I have the Post-Release updates of NVIDIA too, btw. If this sounds CLOSE to something you know about, but one of the details doesn't line up exactly, it might be a mistake in my perception. Are there tests you can suggest to rule something out? Thanks! processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz stepping : 6 microcode : 0x60c cpu MHz : 800.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 5187.00 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz stepping : 6 microcode : 0x60c cpu MHz : 800.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 5186.94 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: (Redundant figures removed. You can view them in the edits if they are still relevant) ps: %CPU PID USER COMMAND 9.4 2399 jason gnome-terminal 6.2 2408 jason bash 17.3 1117 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none 13.7 1667 jason compiz 1.3 1960 jason /usr/lib/unity/unity-panel-service 1.3 1697 jason python /usr/bin/jupiter 0.9 1964 jason /usr/lib/indicator-appmenu/hud-service 0.6 1689 jason nautilus -n 0.4 1458 jason //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session I should highlight specifically that GRUB2 can also be very slow. I don't know the relationship of which scenarios GRUB2 is also slow, but WHEN it is slow, it is slow both before the menu appears and after the selection is made - although for the diagnosis of GRUB2 it is harder for me to tell what the normal speeds should be. With SSD, I would expect that GRUB2 could load instantly, and that the GRUB2 purple would disappear instantly after the selection. The only delay to be expected is the change in graphics modes (though I couldn't guess why that ever requires any noticeable time)

  Read the article

• SQL Server to sql server linked server setup

  - by ScottStonehouse

  Please explain what is required to set up a SQL Server linked server. Server A is SQL 2005 windows logins only Server B is the same (SQL 2005 windows logins only) Server A runs windows XP Server B runs Windows Server 2003 Both SQL Server services are running under the same domain account. I am logged into my workstation with a domain account that has administrative rights on both SQL Servers. Note these are both SQL Server 2005 SP2 - I've had old hotfixes pointed out to me, but those are already applied. The issue I am having is this error: "Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. (Microsoft SQL Server, Error: 18456)"

  Read the article

• How to troubleshoot a remote wmi query/access failure?

  - by Roman

  Hi I'm using Powershell to query a remote computer in a domain for a wmi object, eg: "gwmi -computer test -class win32_bios". I get this error message: Value does not fall within the expected range Executing the query local under the same user works fine. It seems to happen on both windows 2003 and also 2008 systems. The user that runs the shell has admin rights on the local and remote server. I checked wmi and dcom permissions as far as I know how to do this, they seem to be the same on a server where it works, and another where it does not. I think it is not a network issue, all ports are open that are needed, and it also happens within the same subnet. When sniffing the traffic we see the following errors: RPC: c/o Alter Cont Resp: Call=0x2 Assoc Grp=0x4E4E Xmit=0x16D0 Recv=0x16D0 Warning: GssAPIMechanism is not found, either caused by not reassembled, conversation off or filtering. And an errormessage from Kerberos: Kerberos: KRB_ERROR - KDC_ERR_BADOPTION (13) The option code in the packet is 0x40830000 Any idea what I should look into?

  Read the article

• DIVIDE vs division operator in #dax

  - by Marco Russo (SQLBI)

  Alberto Ferrari wrote an interesting article about DIVIDE performance in DAX. This new function has been introduced in SQL Server Analysis Services 2012 SP1, so it is available also in Excel 2013 (which still doesn’t have other features/fixes introduced by following Cumulative Updates…). The idea that instead of writing: IF ( Sales[Quantity] <> 0, Sales[Amount] / Sales[Quantity], BLANK () ) you can write: DIVIDE ( Sales[Amount], Sales[Quantity] ) There is a third optional argument in DIVIDE that defines the result in case the denominator (second argument) is zero, and by default its value is BLANK, so I omitted the third argument in my example. Using DIVIDE is very important, especially when you use a measure in MDX (for example in an Excel PivotTable) because it raise the chance that the non empty evaluation for the result is evaluated in bulk mode instead of cell-by-cell. However, from a DAX point of view, you might find it’s better to use the standard division operator removing the IF statement. I suggest you to read Alberto’s article, because you will find that an expression applying a filter using FILTER is faster than using CALCULATE, which is against any rule of thumb you might have read until now! Again, this is not always true, and depends on many conditions – trying to simplify, we might say that for a simple calculation, the query plan generated by FILTER could be more efficient – but, as usual, it depends, and 90% of the times using FILTER instead of CALCULATE produces slower performance. Do not take anything for granted, and always check the query plan when performance are your first issue!

  Read the article

• What is the Xbox360's D3DRS_VIEWPORTENABLE equivalent on WinXP D3D9?

  - by Jim Buck

  I posted this on StackOverlow, but of course it should be posted here. I am maintaining a multiplatform codebase for Xbox360 and WinXP. I am seeing an issue on the XP side that appears to be related to D3DRS_VIEWPORTENABLE on the Xbox360 version not having an equivalent on WinXP D3D9. This article had an interesting idea, but the only way to construct an identity matrix is to supply negative numbers to D3DVIEWPORT9::X and D3DVIEWPORT9::Height, but they are unsigned numbers. (I tried to put in negative numbers anyway, but nothing interesting happened.) So, how does one emulate the behavior of D3DRS_VIEWPORTENABLE under WinXP/D3D9? (For clarity, the result I'm seeing is that a 2d screen-aligned quad works fine on Xbox360 but is offset/stretched on WinXP. In fact, the (0, 0) starts in the center of the screen on WinXP instead of in the lower-left corner like on the Xbox360 as a result of applying the viewport transform.) Update: I didn't have an Xbox360 devkit at the time I wrote up this question, but I've since gotten one. I commented out the disabling of the D3DRS_VIEWPORTENABLE state, and the exact same behavior resulted on the Xbox360 as on the WinXP build. So, there must be some DirectX magic to bridge the gap here for emulating D3DRS_VIEWPORTENABLE being turned off on WinXP.

  Read the article

• Multiple possible jsp views for a request

  - by Karl Walsh

  I'm looking to offer the user some way of changing how a single page looks based on some pre-defined jsps. i.e. Two or more jsp's contain similar information, and would be backed by a single controller method. The controller would decide which view to return. Is there a common way of achieving this? At the moment I have some administration screens where I control a list of possible views. The user can then choose which one to see from a drop-down. My current issue is that I don't know how to confirm (at the admin screen) that the view is valid. Is there a way of asking spring for all possible views so I can filter them and resent a drop-down on the admin screen rather than a free text field? If not is there a way of asking spring if a single view is valid? All these views will reside under a common directory, so it would probably be possible to scan recursively from that point and build a list of possible views. This goes beyond simply changing the css, since the page content might be different despite being backed by the same model.

  Read the article

• Configure PERL DBI and DBD in Linux

  - by Balualways

  I am new to Perl and I work in a Linux OEL 5x server. I am trying to configure the Perl DB modules for Oracle connectivity (DBD and DBI modules). Can anyone help me out in the installation procedure? I had tried CPAN didn't really worked out. Any help would be appreciated. I am not quite sure I need to initialize any variables other than $LD_LIBRARY_PATH and $ORACLE_HOME These are my observations: ISSUE:: I am getting the following issue while using the DBI module to connect to Oracle: install_driver(Oracle) failed: Can't locate loadable object for module DBD::Oracle in @INC (@INC contains: /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi /usr/lib/perl5/5.8.8 .) at (eval 3) line 3 Compilation failed in require at (eval 3) line 3. Perhaps a module that DBD::Oracle requires hasn't been fully installed at connectdb.pl line 57 I had installed the DBD for oracle from /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/DBD/DBD-Oracle-1.50 Could you please take a look into the steps and correct me if I am wrong: Observations: $ echo $LD_LIBRARY_PATH /opt/CA/UnicenterAutoSysJM/autosys/lib:/opt/CA/SharedComponents/Csam/SockAdapter/lib:/opt/CA/SharedComponents/ETPKI/lib:/opt/CA/CAlib $ echo $ORACLE_HOME /usr/local/oracle/ORA This is how I tried to install the DBD module: Download the file DBD 1.50 for Oracle Copy to /usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/DBD Untar and Makefile.PL . Message: Using DBI 1.52 (for perl 5.008008 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI/ Configuring DBD::Oracle for perl 5.008008 on linux (x86_64-linux-thread-multi) Remember to actually *READ* the README file! Especially if you have any problems. Installing on a linux, Ver#2.6 Using Oracle in /opt/oracle/product/10.2 DEFINE _SQLPLUS_RELEASE = "1002000400" (CHAR) Oracle version 10.2.0.4 (10.2) Found /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Found /opt/oracle/product/10.2/rdbms/demo/demo_rdbms64.mk Found /opt/oracle/product/10.2/rdbms/lib/ins_rdbms.mk Using /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Your LD_LIBRARY_PATH env var is set to '/usr/local/oracle/ORA/lib:/usr/dt/lib:/usr/openwin/lib:/usr/local/oracle/ORA/ows/cartx/wodbc/1.0/util/lib:/usr/local/oracle/ORA/lib:/usr/local/sybase/OCS-12_0/lib:/usr/local/sybase/lib:/home/oracle/jdbc/jdbcoci73/lib:./' WARNING: Your LD_LIBRARY_PATH env var doesn't include '/opt/oracle/product/10.2/lib' but probably needs to. Reading /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk Reading /usr/local/oracle/ORA/rdbms/lib/env_rdbms.mk Attempting to discover Oracle OCI build rules sh: make: command not found by executing: [make -f /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk build ECHODO=echo ECHO=echo GENCLNTSH='echo genclntsh' CC=true OPTIMIZE= CCFLAGS= EXE=DBD_ORA_EXE OBJS=DBD_ORA_OBJ.o] WARNING: Oracle build rule discovery failed (32512) Add path to make command into your PATH environment variable. Oracle oci build prolog: [sh: make: command not found] Oracle oci build command: [] WARNING: Unable to interpret Oracle build commands from /opt/oracle/product/10.2/rdbms/demo/demo_rdbms.mk. (Will continue by using fallback approach.) Please report this to [email protected]. See README for what to include. Found header files in /opt/oracle/product/10.2/rdbms/public. client_version=10.2 DEFINE= -Wall -Wno-comment -DUTF8_SUPPORT -DORA_OCI_VERSION=\"10.2.0.4\" -DORA_OCI_102 Checking for functioning wait.ph System: perl5.008008 linux ca-build9.us.oracle.com 2.6.20-1.3002.fc6xen #1 smp thu apr 30 18:08:39 pdt 2009 x86_64 x86_64 x86_64 gnulinux Compiler: gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm Linker: not found Sysliblist: -ldl -lm -lpthread -lnsl -lirc Oracle makefiles would have used these definitions but we override them: CC: cc CFLAGS: $(GFLAG) $(OPTIMIZE) $(CDEBUG) $(CCFLAGS) $(PFLAGS)\ $(SHARED_CFLAG) $(USRFLAGS) [$(GFLAG) -O3 $(CDEBUG) -m32 $(TRIGRAPHS_CCFLAGS) -fPIC -I/usr/local/oracle/ORA/rdbms/demo -I/usr/local/oracle/ORA/rdbms/public -I/usr/local/oracle/ORA/plsql/public -I/usr/local/oracle/ORA/network/public -DLINUX -D_GNU_SOURCE -D_LARGEFILE64_SOURCE=1 -D_LARGEFILE_SOURCE=1 -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -fno-strict-aliasing $(LPFLAGS) $(USRFLAGS)] build: $(CC) $(ORALIBPATH) -o $(EXE) $(OBJS) $(OCISHAREDLIBS) [ cc -L$(LIBHOME) -L/usr/local/oracle/ORA/rdbms/lib/ -o $(EXE) $(OBJS) -lclntsh $(EXPDLIBS) $(EXOSLIBS) -ldl -lm -lpthread -lnsl -lirc -ldl -lm $(USRLIBS) -lpthread] LDFLAGS: $(LDFLAGS32) [-m32 -o $@ -L/usr/local/oracle/ORA/rdbms//lib32/ -L/usr/local/oracle/ORA/lib32/ -L/usr/local/oracle/ORA/lib32/stubs/] Linking with /usr/local/oracle/ORA/rdbms/lib/defopt.o -lclntsh -ldl -lm -lpthread -lnsl -lirc -ldl -lm -lpthread [from $(DEF_OPT) $(OCISHAREDLIBS)] Checking if your kit is complete... Looks good LD_RUN_PATH=/usr/local/oracle/ORA/lib Using DBD::Oracle 1.50. Using DBD::Oracle 1.50. Using DBI 1.52 (for perl 5.008008 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI/ Writing Makefile for DBD::Oracle Writing MYMETA.yml and MYMETA.json *** If you have problems... read all the log printed above, and the README and README.help.txt files. (Of course, you have read README by now anyway, haven't you?)

  Read the article

• Default Document not posting for IIS 7

  - by Nikshep

  I am using URL rerouting in Asp.net 4.0 and my default page for the site is \home where user's can log in the app.So when the users type in my site's url i.e www.domain.com cause of the defualt page config which I have it gets redirected to my home.aspx page which is mapped on my global.asax as \home. Now all the log in request i.e Post request coming from www.domain.com are failing no events are being fired on the server. Where as if I try www.domain.com\home then things starts working I am able to log on. I had read a similar issue but still am confused about the solution http://forums.iis.net/t/1164877.aspx , this used to work fine on IIS 6 but on IIS 7 such a scenario started happening. Am I missing some configuration , please help.

  Read the article

• Why only the left speakers are working?

  - by user324469

  I've just bought a 5.1 speakers and only the left side speakers and the center are working. If I plug in the speakers to my mp3 player than each speaker is working, so the speakers are good. I have windows 7 and I can't configure it. Please help me! I'm sure that the problem is with some settings at the computer. A while ago I had the same issue with some stereo speakers and I can't remember how I've fixed it, but it was only a setting error. I don`t think that my sound card could be the problem, because it's in-built and I have a new motherboard: asus m2n68-am. I've just tested my computer with some stereo head speakers and also only the left one was working. If I start the speakers very loud than the right speakers are making some noise, too I've connected the speakers with a two channels cable. This is the speakers type: genius sw-hf 5.1 5050 v2

  Read the article

• <solved> MySQL Replication A->B->C

  - by nonus25

  I was setting the MySQL Replication for master - slave/master - slave and Replication for master - slave its works fine but when i have enable this option in my.cnf log-slave-updates=1 for updating the master bin log my replications is starting be slower and the time Seconds_Behind_Master is growing. I use innodb engine but the DB is big. Any idea how i can improve the replication, looks like the network is not the issue. Also i was think to use binlog_format=ROW but master is using default setting for replication 'statement' and i cant reset master ;) Thanks ...

  Read the article

• Double default gateway ubuntu server

  - by Elena

  I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

  Read the article

• Sending files with iChat doesnt work in Snow Leopard

  - by Nippysaurus

  My girlfriend and I often sit in the lounge looking at stuff online and sending it to each other to look at. So sometimes we drag images into an iChat and it will appear in the other persons iChat window. The ability to do this seems to have broken with the upgrade to 10.6, and the issue persists over both of our laptops and my iMac. The following is a scheenshot of what happens. The image that appears in my window is from me dragging it in there, but the other person cannot see it, and the next bubble is the other person attempting to send me an image, but I only ever see that little white circle for a while then it dissapears. Is this broken for everyone?

  Read the article

• Windows XP IIS5 performance across Network

  - by davidsleeps

  Hi, Just wondering whether Windows XP with IIS5 running needs any extra configuration to be suitable as a web server...I'm not considering using this for anything other than a web server on a small network for testing development etc One of the reasons I'm concerned though is that we've deployed an asp.net application to a workstation with Windows XP, and running the application using a browser on the machine (so accessing it through localhost/myApp/page.aspx and not accessing it through the network) runs the application really quickly. If another machine on the LAN accesses the same page (using http://ComputerName/myApp/page.apx) then the whole application runs noticeably slower...yet the computers are connected on a gigabit switch...so I wouldn't have thought network latency or bandwidth could be an issue... Does Windows XP need anything etc enabled or changed or network settings for it to work correctly?

  Read the article

• Filezilla/Puttygen doesn't recognize private key file

  - by devzoner

  I have generated a key for an Ubuntu Virtual Machine running on Azure Cloud Services http://www.windowsazure.com/en-us/manage/linux/how-to-guides/ssh-into-linux/ openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout myPrivateKey.key -out myCert.pem When loading the private key into Filezilla, it asks me to convert the format, however, when converting the key it fails, the same happens with puttygen from linux console, using this: puttygen myPrivateKey.key -o myKey.ppk In both cases I have the following error: puttygen: error loading `myPrivateKey.key': unrecognised key type By the way, this key doesn't have a passphrase. I found an old thread about it, but I'm using 0.6.3 version which is newer than what this thread recommends: http://fixunix.com/ssh/541874-puttygen-unable-import-openssh-key.html I've managed to solve this issue by using another gui client Fugu for Mac, but one of my co-worker uses windows and I still have to figure this out. Since Filezilla is the de-facto ftp client, I thought it would be easier to solve it there. Thanks

  Read the article

• IIS - Forwarding requests to a folder to another port

  - by user1231958

  Context I currently installed Glassfish 3 in a server that currently holds ASP and PHP inside Internet Information Server 7 so we can start moving to a new system architecture (the information system is being remade). Obviously, Glassfish uses another port and without too much configuration (all I had to do is to install it) it worked. If I write www.domain.com:8080, the person will be redirected to the Glassfish server. Issue Obviously I don't want the person to write the port! I also believe it might also hold some security issues. Requirement I need the server to take an address of the form www.domain.com/gf or new.domain.com or something alike, and when it receives such a request, "redirect" (masking the URL) the user to the Glassfish website (www.domain.com:8080). Thank you beforehand!

  Read the article

• Oracle on NFS vmdk beats native NFS!?

  - by fletch00

  Hi, my colleagues are pursuing this with Netapp and Oracle - but I thought I'd post here on the off chance someone else has seen this We have a RedHat 5 VM (fully up2date) running Oracle 11i with data disks mounted via the VM's linux kernel NFS using Oracle's recommended mount options and the performance is very inconsistent (Querys that should take < 2 seconds sometimes take 60 seconds) Funny thing is we can run the same queries perfectly consistently < 2 seconds on a VMDK residing on SAME NetApp NFS datastore! Makes me wish Oracle and NetApp collaborated as closely as VMware and NetApp did on the Virtual Storage Console we used to perfectly set the NFS options and keep them in compliance... We have tried a few Linux NFS options others have posted and not seen improvement so far. We are now creating VMDK's for the VM to replace the Linux NFS mounted and workaround the issue as our developers need consistent performance ASAP.

  Read the article

• Should I use my ISP's DNS, or Google's 8.8.8.8?

  - by Torben Gundtofte-Bruun

  It seems like a good idea to use Google's public DNS 8.8.8.8 and 8.8.4.4 because it's really fast -- much faster than my own ISP's DNS! -- and probably more reliable, too. That seems like a ridiculously quick win for me, and much easier to remember. Assuming we're not all "tin foil hat" about Google, why shouldn't everybody use Google DNS? Note: I've seen this question, but I don't want a comparison to OpenDNS. This is about everyday use by everyday people in their homes. Update: I seem to have put my hand in a wasps' nest of privacy concerns. I appreciate the issue, but I was expecting a more technology-oriented discussion...

  Read the article

• Shutdown in background - PHP

  - by William

  I'm trying to shutdown an Ubuntu machine from PHP and am running into an issue if I want to delay the shutdown. The PHP line I'm using is: exec("sudo shutdown -h +5 &", $output); Where 5 is however many minutes in the future I want to shutdown. My problem is that this won't background and Apache hangs until either the machine is shutdown or someone else cancels the shutdown. shell_exec() has the same result. Is there another way to do this that will return immediately?

  Read the article

• #1 O’Reilly eBook for 2010

  - by Jan Goyvaerts

  The year-end issue of O’Reilly’s author newsletter discussed the trends O’Reilly has been seeing the past few years, and their predictions for 2011. The key trend is that digital is now more than ever poised to take over print: Our digitally distributed products have grown from 18.36% of our publishing mix in 2009 to 28.09% of our mix in 2010. What is more impressive is that our digitally distributed products have produced more than double the revenue that has been lost with the decline of print. I think this is important because some say that digital cannibalizes print products. Our data indicates the contrary, as print is declining much more slowly than digital is growing. I think we may be seeing developers purchasing a print book, and then purchasing the electronic editions to search and copying code from, as the incremental cost for digital is more than reasonable. My own book seems to be leading this trend. Thanks to everyone who purchased it! And the five bestselling O’Reilly ebook products for 2010: 1) Regular Expressions Cookbook, 2) jQuery Cookbook, 3) Learning Python, 4) HTML5: Up and Running, and 5) JavaScript Cookbook. I think it’s interesting that the top five ebooks are code-intensive books. They’re great products for search and code reuse. It’s also interesting that none of the top 5 ebooks made the top 5 of print books.

  Read the article

• Windows 7 won't load unless other harddrives "disconnect"ed in UEFI shell

  - by lmz

  I have three disks, one GPT partitioned containing Windows 7 and Debian, the other MBR partitioned containing CentOS, and the other one MBR partitioned, empty. It used to work (loading Windows boot manager using rEFIt) but now after installing CentOS and OpenIndiana on the second drive, Windows won't boot. The logo is displayed briefly and then a text mode scrollbar "Loading files", then back to the rEFIt menu. The only thing that makes it work is if I drop into the UEFI shell and run disconnect XX where XX is the device handle of the other hard drives (obtained from running devices). This makes me think that the bootloader is getting confused about where the Windows partition is. Is there any information on how the Windows UEFI boot loader finds the Windows partition, or is there any logging I can turn on to help troubleshoot this issue?

  Read the article

< Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >