Search Results

Search found 15139 results on 606 pages for 'scripting interface'.

Page 485/606 | < Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >

• Windows server 2008R2 routing with single NIC

  - by Fabian

  I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

  Read the article

• Change authentication wifi WPA to WEP on Windows 8

  - by Kites

  I use netsh wlan set hostednetwork mode=allow ssid=Kites key=phambaoViet netsh wlan start hostednetwork To share WiFi from LAN network on laptop (Windows 8) to my other device. When I show information netsh wlan show hostednetwork the supported authentication is WPA. My device support authentication WEP only. How can I change the authentication to WEP? Infomation: Interface name: Wi-Fi Driver : Qualcomm Atheros AR9002WB-1NG Wireless Network A dapter Vendor : Qualcomm Atheros Communications Inc. Provider : Microsoft Date : 03/07/2012 Version : 3.0.0.130 INF file : C:\Windows\INF\netathrx.inf Files : 2 total C:\Windows\system32\DRIVERS\athrx.sys C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g 802.11n FIPS 140-2 mode supported : Yes 802.11w Management Frame Protection supported : Yes Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP Vendor defined TKIP WPA2-Enterprise Vendor defined Vendor defined Vendor defined WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP Vendor defined CCMP WPA2-Enterprise Vendor defined Vendor defined Vendor defined WPA2-Personal CCMP Vendor defined Vendor defined Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP Vendor defined Vendor defined

  Read the article

• How to sync two computers using new MobileMe calendar

  - by CesarGon

  I have been using MobileMe for over a year with success. I use it to sync my Outlook calendars in my work and home computers, using Windows 7 and Outlook 2007. The main Outlook calendar folder in my work computer is replicated to MobileMe as "Work", and synced to my home computer, and the main calendar folder in my home computer is replicated to MobileMe as "Home", and synced to my work computer. This means that I can see both "Work" and "Home" calendars from both computers (as well as from the web interface through me.com), which is very convenient. Yesterday I migrated to the new MobileMe calendar, accepting the suggestion that popped up on the me.com website. After the migration, the MobileMe control panel on each of Windows computers asked me to re-configure my calendar setup, and everything fell apart. The "Home" and "Work" calendar folders in Outlook are now ignored by MobileMe, and new ones named "Home in MobileMe" and "Work in MobileMe" have been created, and placed in a separate Outlook data file rather than the default. This means that now: I now have four folders, two of which are not replicated to MobileMe The two folders that are not replicated reside on a separate data file, so alarms and reminders don't work; they're basically useless to me as calendar folders In addition, the button in the MobileMe Control Panel that used to let me specify what MobileMe folder should be synced against the default Outlook folder has gone. MobileMe is now too smart. Do you have any idea how to undo this mess and go back to a situation where I have two folders, as described in the top paragraph, which keep synced? I don't want an extra data file. Thanks.

  Read the article

• Securely executing system commands as sudo from PHP

  - by Aydin Hassan

  Is it possible? I have written a command line tool in PHP for creating new environments for our company. It creates system users, directories, databases, VHosts and restarts apache, amongst other things. These commands require sudo privileges. I thought it might be a nice idea to have a web-interface for it, to make it easier for other non-developers to use. The web app would be behind authentication. When running from the command line I just run sudo tool.php, obviously I can't do this from a web app. How could I do this securely? Giving the apache user sudo access seems silly, as this would means all sites hosted on the box (eg all our environments) would have sudo access. Is it possible to make this tool run under a different user? this user could have sudo privileges for only the commands I need? How do things like plesk and cPanel do this? Any thoughts?

  Read the article

• Dell OpenManage On Ubuntu Server 12.04 Cannot Log In

  - by Austin

  I have a Dell Poweredge 2950 with 2X130GB and 2X2TB drives. I need to set them up in a RAID 1 array so that the 130GB Drives are mirrored and host the OS, while the 2TB drives are mirrored and are the content drives. So I go from 4 disks, down to two, one 130GB and one 2TB. I can do that in the BIOS RAID utility no problem. But I need to be able to manage the RAID arrays and be able to expand them WITHOUT shutting down the server. Now, to my understanding, openmanage will allow me to do that AND it runs on ubuntu. So I go and set it up and try to log into the web interface at and it will not let me log in. I have followed dell's guide to set up openmanage, even added the usernames to the files and permissions and such, however, cannot get it to let me log in or anything. I have reinstalled Openmanage several times, even reinstalled the OS three times, and nothing works. Google does not help either. It simply says login failed after hitting submit. Please Help

  Read the article

• Can't connect to Synology DiskStation through HTTPS when using Windows 7 Import

  - by LeonidasFett

  a little background to my problem: I have a Synology DiskStation 213j that I use as a backup/data storage solution. When I'm at work, I would like to push and pull files from my DiskStation but I can't use VPN which is forbidden for outgoing connections. So I wanted to try to use HTTPS so I can at least connect securely to the web interface. I mostly use Chrome which uses the Windows Certificate Store. So I tried importing a self-signed certificate into it, without success. I still get a warning in Chrome telling me the connection is not secure because it can't be verified. When I import the certificate into Firefox though, it works and I can connect through HTTPS. I checked my domain on this site: http://www.sslshopper.com/ssl-checker.html It shows no errors, only a warning that the certificate is self-signed. Which is OK in this case. Any got any idea why importing the certificate into Windows 7 doesn't work? I tried Right-Click domain.mydomain.de.crt File --> Install certificate --> Next --> both options here (in case of "Place certificate in following store:" I selected "Third Party Root Certificate Authorities") to no avail.

  Read the article

• Long access time for static web page on virtual machine

  - by Karol

  My setup Windows 7 on workstation that I use at work (with domain) and home (no domain) Virtual machine (VMWare) that runs Arch Linux (I will call it just "Linux") with network interface in bridged mode. Linux serves web pages with Nginx. IP address of Linux machine is 192.168.0.16 and is added to C:\windows\system32\drivers\etc\hosts: 192.168.0.16 bridged bri IP address of Windows workstation is added to /etc/hosts: 192.168.0.10 workstation I can add more details to my setup description (I am not sure what is relevant). The question Often (but not always) it takes long time for a web browser (Firefox) to open static web page served by Linux. I am sure it is not a performance issue. To be more specific: it takes about ~20 seconds to resolve(?) the address http://bridged for a web browser. Additionally I have just installed samba service and noticed similar problem, so it is not specific to browser & http. Initial access for samba shares also takes long time.

  Read the article

• Migrating to CF9: trouble getting JRun working with SSL

  - by DaveBurns

  I have a client on MX7 who wants to migrate to CF9. I have a dev environment for them on my WinXP machine where I've configured MX7 to run with JRun's built-in web server. I've had that working for a long time with both regular and SSL connections. I installed CF9 yesterday side-by-side with the existing MX7 install to start testing. The install was smooth and detected MX7, adjusted CF9's port numbers for no conflict, etc. Testing started well: MX7 over regular and SSL still worked and CF9 worked over regular HTTP. But I can't get CF9 to work with SSL. I installed a new certificate with keytool, FireFox (v3.6) complained about it being unsigned, I added it to the exception list, and now I get this: Secure Connection Failed An error occurred during a connection to localhost:9101. Peer reports it experienced an internal error. (Error code: ssl_error_internal_error_alert) I've been Googling that in all variations but can't find much help to get past this. I don't see any info in any log files either. FWIW, here's my SSL config from SERVER-INF/jrun.xml: <service class="jrun.servlet.http.SSLService" name="SSLService"> <attribute name="enabled">true</attribute>` <attribute name="interface">*</attribute> <attribute name="port">9101</attribute> <attribute name="keyStore">{jrun.rootdir}/lib/mykey</attribute> <attribute name="keyStorePassword">*deleted*</attribute> <attribute name="trustStore">{jrun.rootdir}/lib/trustStore</attribute> <attribute name="socketFactoryName">jrun.servlet.http.JRunSSLServerSocketFactory</attribute> <attribute name="deactivated">false</attribute> <attribute name="bindAddress">*</attribute> <attribute name="clientAuth">false</attribute> </service> Anyone here know of any issues re setting up SSL and CF9? Anyone had success with it? Dave

  Read the article

• Can't remove route from routing table

  - by anon

  (I am on Windows Server 2003.) I see a couple of unusual entries in my routing table that I would like to remove: Network Destination Netmask Gateway Interface Metric XXX.27.44.1 255.255.255.255 127.0.0.1 127.0.0.1 20 XXX.27.255.255 255.255.255.255 XXX.27.44.1 XXX.27.44.1 20 All the "XXX"'s are the same octet. I would strongly prefer NOT to clear the routing table, since this is a production server. Here is what I've tried: route delete XXX.27.44.1 The route specified was not found. route delete XXX.27.44.1 mask 255.255.255.255 127.0.0.1 metric 20 The route specified was not found. route delete XXX.27.255.255 The route specified was not found. route delete XXX.27.255.255 mask 255.255.255.255 XXX.27.44.1 metric 20 The route specified was not found. I also tried adding the routes in hopes that I could delete them: route add XXX.27.44.1 mask 255.255.255.255 127.0.0.1 metric 20 The route addition failed: The parameter is incorrect. route add XXX.27.255.255 mask 255.255.255.255 XXX.27.44.1 metric 20 The route addition failed: The parameter is incorrect. Bonus question: What do these entries do, and how did they get there?

  Read the article

• Cannot browse remote networks even with WINS configured

  - by paradroid

  As the NetBIOS protocol acts on Layer 2 and so is not routable, In order to enable network browsing of remote networks, WINS has been installed and configured on two domain controllers, both of which are on different networks. The WINS servers seem to be replicating with eachother, and each has 127.0.0.1 set as the Primary WINS Server in each of their LAN interface properties, with nothing entered for Secondary WINS Server. The DC which holds the PDC Emulator FSMO role has the Computer Browser service running and set to Auto start, and it has the WINS/NBT node type network setting at 0x8 (H-node - Hybrid node). Remote network browsing does not work. Is the WINS/NBT node type correct for this scenario? The reason why I think it may not be the right one is because I set the DHCP Server's 046 WINS/NBT node type option to 0x8 as well, after which the DHCP clients started to disappear from the Network folders. When that option is not set, does it default to B-node (Broadcast node)? Or could it be a problem with the WINS servers setup?

  Read the article

• Cisco ASA dropping IPsec VPN between istself and CentOS server

  - by sebelk

  Currently we're trying to set up an IPsec VPN between a Cisco ASA Version 8.0(4) and a CentOS Linux server. The tunnel comes up successfully, but for some reason that we can't figure out, the firewall is dropping packets from the VPN. The IPsec settings in the ASA sre as follows: crypto ipsec transform-set up-transform-set esp-3des esp-md5-hmac crypto ipsec transform-set up-transform-set2 esp-3des esp-sha-hmac crypto ipsec transform-set up-transform-set3 esp-aes esp-md5-hmac crypto ipsec transform-set up-transform-set4 esp-aes esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto map linuxserver 10 match address filtro-encrypt-linuxserver crypto map linuxserver 10 set peer linuxserver crypto map linuxserver 10 set transform-set up-transform-set2 up-transform-set3 up-transform-set4 crypto map linuxserver 10 set security-association lifetime seconds 28800 crypto map linuxserver 10 set security-association lifetime kilobytes 4608000 crypto map linuxserver interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption aes hash sha group 2 lifetime 28800 crypto isakmp policy 2 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 3 authentication pre-share encryption aes-256 hash md5 group 2 lifetime 86400 crypto isakmp policy 4 authentication pre-share encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 5 authentication pre-share encryption aes-192 hash md5 group 2 group-policy linuxserverip internal group-policy linuxserverip attributes vpn-filter value filtro-linuxserverip tunnel-group linuxserverip type ipsec-l2l tunnel-group linuxserverip general-attributes default-group-policy linuxserverip tunnel-group linuxserverip ipsec-attributes pre-shared-key * Does anyone know where the problem is and how to fix it?

  Read the article

• Linux RFID reader HID Device not matching driver

  - by blietaer

  Hello, I got a RFID reader (GigaTek PCR330A-00) that is meant to be recognized under linux/windows as a (Human Interface Device) keyboard/USB. I hate to say this but it is working as a charm under Win7 but not "really" under Linux. Under Debian-like distros (x/k/Ubuntu, Debian,..), or Gentoo, or... I just can't have the device working at all: the device scan well (it has its USB 5V, so it is happy/beeping/blinking) something happened in the dmesg, but no immediate screen display of the RFID Tag code as expected (and seen under win7) Support is claiming it is ok under RHEL or SLED "enterprises" distros... and I must admit I saw it working under a RHEL4... I tried stealing the driver but did not succeed having my reader working... My question is thus double: 1./ How can I hack the kernel to add support to my device (simply register PID/VID?) ? 2./ What is different at all in a "enterprise" proprietary distro? how can I re-use it? Thank you for any hint/help. Cheers,

  Read the article

• App-V Problems After SCCM 2007 SP2 Upgrade

  - by GAThrawn

  We're running an SCCM (MS System Centre Config Manager, successor to SMS) 2007 environment and delivering a number of applications to clients virtualized using App-V 4.5.1. The App-V apps are delivered by SCCM in Download-and-Execute, not streaming mode. The SCCM environment was recently service packed to SCCM 2007 SP2 (amongst other things this gives Win7 support). We also pushed out the updated SCCM clients to our workstations. This seems to have broken file associations for virtual apps for a large number of our users. The users can still open their App-V apps by finding the specific app on their Start Menu and clicking it's icon, but double-clicking an associated file in Explorer, or opening an email attachment gives the "This action is only valid for installed applications" error. There is a Technet blog entry from the App-V team talking about this issue "Upgrade to ConfigMgr 2007 SP2 may break App-V File Type Associations" but running the script there comes back saying "The User Interface option has been updated" but hasn't seemed to fix the problems for any of our users. Unfortunately the Technet blogs don't seem to have comments switched on so you can't see how this has worked out for other people. Anyone else had this problem, have you found any other way to fix it?

  Read the article

• How to recover a Linksys WRT54GL router that has a blinking green power LED and no response from the

  - by Peter Mounce

  I was flashing the router with the Tomato firmware, but something went wrong; I'm not sure what. Now, the router responds to ping at 192.168.1.1 (my Mac's on a static IP 192.168.1.21), but the web-interface doesn't come up. I have read that this situation is recoverable in a [couple of places][2], but I haven't been having much success and so I wondered whether anyone could help. From my Mac (OSX 10.5) I have tried to tftp a new vanilla-Linksys firmware to the router and reboot; according to the trace, this sends it but the router behaves no differently after a reboot. I've read that if boot_wait is turned on, I'll have an easier time, but I haven't been able to find any instructions that tell me how I can tell whether I did this or not (I don't think I have, but I might have, when I tinkered the first time months ago - the router has worked since then, though). I have found a couple of references to [something called JTAG][3], which seems like some kind of [homebrew diagnostic cable thing][4], but that's a little beyond my ken. Happy to try it, with muppet-level instructions, though (I do software, not hardware!). So, I'm at a bit of a loss, really, and wondered whether anyone could provide me with the route (ha. ha.) out of this mess? Hm, I can't post all the links I wanted to until I have some more reputation.

  Read the article

• I/O Error on LG GSA-H12N DVD drive on Windows 7

  - by Ashwin

  I am facing an I/O Error when I try to burn DVD data discs on my LG GSA-H12N DVD drive on Windows 7. Note that I was able to do this same operation on the same hardware/software just a day earlier without any problems, but with Windows XP. The only change (AFAIK) has been the installation of Windows 7 to replace Windows XP on this PC. Here is the error I get when I try to burn a DVD data disc using CDBurnerXP 4.2.7.1801: Burning error occured An error occured while burning the disc. Most likely the disc is not usable. Usually these errors happen if the inserted media is not compatible to the drive or of poor quality. (devNTSPTI_IO_Error) Could not write to Disc (LBA: 52864 Length: 32). SCSI Pass-through Interface I/O Error. - 0xFF045D Note that there can be no problem with the discs since I have been using the same discs (from the same box) just before the Windows 7 installation with no problems. The only change has been Windows 7. I tried InfraRecorder v0.5 and ImgBurn v2.5 and got similar I/O errors: Note that Windows 7 lists the LG GSA-H21N drive as being compatible (see this link). I also checked the LG Drivers website and using the firware update from there updated the drive firmware from version UL01 to UL02. But, even this has not helped. The drive reads DVDs without any problem, but continues to produce coasters. Could someone help me figure out what is the problem? Thanks :)

  Read the article

• Changing default openVPN IP in linux server

  - by Lamboo

  The problem is that we have a public OpenVPN service. Pay €9.95 and you get an OpenVPN account at currently half a dozen of servers for a month. This means there are always and will always be some people who create a certain amount of abuse or trouble. On the long run, the external IP every OpenVPN user gets assigned is prohibited from editing Wikipedia, it might be banned by e-gold and on some popular webforums, one-click-hosters, etc. Not a pleasant experience for the 97% of our customers who use our service responsibly and legitimately to regain their privacy. So even if I could change the assigned external IP every few months; e. g. from 216.xx.xx.164 to 216.xx.xx.170, it would help us a lot to combat this abuse and to provide our paying clients with "fresh" IP addresses that aren't banned or restricted on some popular Internet sites and services, yet. Does anybody know how to change the first IP address assigned to the public interface in CentOS? So that e.g. OpenVPN in future doesn't give our OpenVPN clients the external IP 123.xx.xx.164 but rather 123.xx.xx.170?

  Read the article

• Debian DNSSEC - howto secure a domain?

  - by Daniel Marschall

  I have a beginner question about DNSSEC. I have much experience with TLS and cryptography-stuff and would like to try out this new technology. I have googled very much about this but I haven't found useful information for me. I think one confusion in information gathering is that "Debian howto DNSSEC setup" can mean "How to USE DNSSEC for resolving" OR "How to secure your domain with DNSSEC". I am searching the second. I am running a Debian Squeeze server with root privileges which has a domain name ending with ".de" (which is already signed by the root zone). The network interface at this server uses the gateway IP (DNS resolver?) of the datacentre the server is running on. My domain is hosted at freedns.afraid.org , where I can add DNS RRs for my domain. They are currently NOT capable of adding DNSSEC RRs, but I am bugging them to support this soon. ;-) My simple question is: How do I setup DNSSEC on Debian? Resp. who have I ask to? As far as I understand, all I have to do is to run dnssec-keygen on my Debian server and then add the key to my DNS-provider as DNSSEC RR. (And change it every 30 days?) I have looked at this http://www.isc.org/files/DNSSEC_in_6_minutes.pdf but it looks like you have to be the owner of a ZONE, so I don't think this applies to me. Who needs to sign my domain? My DNS-provider or my zone (DeNIC) or can I do it myself? Any help is very appreciated!

  Read the article

• Why does my DSDT table is different from what I found online?

  - by Hao Shen

  I have found a field in DSDT table where I want to modify from here http://www.ztex.de/misc/c2ctl.e.html Generally, I want to modify the _PSS field about the processor so that I can have more frequency levels available in the CPUfreq driver interface. I try to use this command to dissemble the DSDT table from my Desktop(Linux2.6.29,Intel CORE 2): cat /proc/acpi/dsdt > dsdt.aml iasl -d dsdt.aml Then I have a file dsdt.dsl as following(very long, so I just show the beginning of the file): /* * Intel ACPI Component Architecture * AML Disassembler version 20090123 * * Disassembly of dsdt.aml, Mon May 6 20:41:40 2013 * * * Original Table Header: * Signature "DSDT" * Length 0x00003794 (14228) * Revision 0x01 **** ACPI 1.0, no 64-bit math support * Checksum 0x46 * OEM ID "DELL" * OEM Table ID "dt_ex" * OEM Revision 0x00001000 (4096) * Compiler ID "INTL" * Compiler Version 0x20050624 (537200164) */ DefinitionBlock ("dsdt.aml", "DSDT", 1, "DELL", "dt_ex", 0x00001000) { Method (DBIN, 0, NotSerialized) { Noop } Scope (\) { Device (_SB.VBTN) ................... But I can not find the _PSS field as shown in the website I have given above. I do not know why? I am sure the current cpufreq driver shows 4 frequency levels available. So at least there should be something in the table showing this..right? Has anybody here played with the DSDT table before? Thanks,

  Read the article

• Solaris 10: cannot ping to/from server

  - by anurag kohli

  All, I have a Solaris 10 server which is not reachable by IP (ie can't ping to/from the server). I believe I have the default route setup correctly. See below: # ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 192.168.62.100 netmask ffffff00 broadcast 192.168.62.255 ether 0:14:4f:b1:9b:30 # netstat -rn Routing Table: IPv4 Destination Gateway Flags Ref Use Interface -------------------- -------------------- ----- ----- ------ --------- 192.168.62.0 192.168.62.100 U 1 40 bge0 224.0.0.0 192.168.62.100 U 1 0 bge0 default 192.168.62.1 UG 1 0 127.0.0.1 127.0.0.1 UH 1 4 lo0 # # cat /etc/defaultrouter 192.168.62.1 I have verified layer1 and layer 2 are up on the switchport, and that it's on the correct VLAN. I have also checked the default gateawy (192.168.62.1) is in fact reachable since I can ping it from my PC: Pinging 192.168.62.1 with 32 bytes of data: Reply from 192.168.62.1: bytes=32 time=1ms TTL=254 Reply from 192.168.62.1: bytes=32 time=1ms TTL=254 Reply from 192.168.62.1: bytes=32 time=3ms TTL=254 Reply from 192.168.62.1: bytes=32 time=6ms TTL=254 I'm at a loss as to what is wrong. I would highly appreciated your assistance. Thank you very much.

  Read the article

• Ubuntu second static IP, ifconfig, /etc/network/interfaces

  - by Schmoove

  I would like to add a second static IP to my local Ubuntu 11.10 desktop machine and have it automatically available after rebooting. So far I am successfully using ifconfig to to temporarily set up an alias for my primary network interface: # ifconfig eth1:0 192.168.178.3 up # ifconfig eth1 Link encap:Ethernet HWaddr c8:60:00:ef:a3:d9 inet addr:192.168.178.2 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::ca60:ff:feef:a3d9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:61929 errors:0 dropped:0 overruns:0 frame:0 TX packets:64034 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:45330863 (45.3 MB) TX bytes:28175192 (28.1 MB) Interrupt:42 Base address:0x4000 eth1:0 Link encap:Ethernet HWaddr c8:60:00:ef:a3:d9 inet addr:192.168.178.3 Bcast:192.168.178.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:42 Base address:0x4000 However, when I add the following to /etc/network/interfaces, the alias is not up and running as expected after a reboot: # vi /etc/network/interfaces auto eth1:0 iface eth1:0 inet static address 192.168.178.3 netmask 255.255.255.0 I would like to know what to configure to get this to work. As a side note, I am running gnome shell.

  Read the article

• Hardware needed to route between two networks over wireless

  - by AptDweller

  I recently rented an apartment about 100 yards from my brother's house. I have line of sight to his house and can pick up his home AP signal with one of my two laptops if I go out on my balcony (facing his house) or put the laptop by the window. The other laptop will sometimes see the SSID broadcast, but fails to connect, drops, etc. We would like to set up a persistent wireless connection between our homes. We would prefer each network be logically segmented as independent networks, but he will share his internet connection. I've got a bunch of tv shows saved to a NAS by my TiVO that I'd like to make available to him across the wireless link. My brother strongly prefers to not mess with his WAP at all. His network is running fine and is afraid to mess it up. I guess you could say he is "technologically declined". If we can get a reliable 11Mbps connection we will be satisfied. What hardware do I need to make this work? I was thinking a router with two wireless interfaces (external antennas) a wired interface, and a directional antenna mounted on my balcony facing his house. Can anyone recommend hardware to make this happen? Cheaper is better. I'll only be living in the area a year or two. I do have an old satellite TV antenna if that can be used to direct the signal.

  Read the article

• LYNC / OCS... problems getting edge server working.

  - by TomTom

  New setup Lync 2010 (i.e. OCS 2010). I have serious problems getting my edge system going. Internally things work fine. Externally I am stuck. I have used the tester at https://www.testocsconnectivity.com/ and it also fails. NOTE: I use the domain xample.com / xample.local here just as example. Here is the setup. I have 2 internal hosts (lync.xample.local, edge.xample.local). edge.xample.com is also correctly in dns. and points to the edge.xample.local external assigned ip address (external interface). Externally, I have the following dns entries: edge.xample.com _sip._tcp - edge.xample.com 443 _sipfederationtls._tcp - edge.xample.com 5061 _sipinternaltls._tcp - lync.xample.local 5061 _sip._tls - edge.xample.com 443 My problem is that the ocs connection test always ends up trying to contact lync.xample.local (i.e. the internal address) when connecting to [email protected]. The error is: Attempting to Resolve the host name lync.xample.local in DNS. This shows me it clearly manages to connect to SOMETHING, but it does either fall through to the _sipinternaltls._tcp entry, OR it does get that internal entry wrongly from the edge system. Am I missing some entries or have some wrong?

  Read the article

• tap interfaces always disabled in linux bridge

  - by Dani Camps

  I have a physical interface eth0, and I want to create two virtual interfaces and bridge them with eth0. For this purpose I do: #Create the virtual interfaces tunctl -t tap0 tunctl -t tap1 ifconfig tap0 up ifconfig tap1 up #Create the bridge brctl addbr br0 brctl stp br0 off brctl addif br0 eth0 brctl addif br0 tap0 brctl addif br0 tap1 #Turning up the bridge ifconfig br0 up However my problem if that the tap interfaces always appear disabled in the bridge, and no traffic flows to them. $brctl show br0 bridge name bridge id STP enabled interfaces br0 8000.080027cabeba no eth2 tap0 tap1 $brctl showstp br0 br0 bridge id 8000.080027cabeba designated root 8000.080027cabeba root port 0 path cost 0 max age 20.00 bridge max age 20.00 hello time 2.00 bridge hello time 2.00 forward delay 15.00 bridge forward delay 15.00 ageing time 300.01 hello timer 0.00 tcn timer 0.00 topology change timer 0.00 gc timer 298.42 flags eth2 (1) port id 8001 state forwarding designated root 8000.080027cabeba path cost 4 designated bridge 8000.080027cabeba message age timer 0.00 designated port 8001 forward delay timer 12.97 designated cost 0 hold timer 1.24 flags tap0 (2) port id 8002 state disabled designated root 8000.080027cabeba path cost 100 designated bridge 8000.080027cabeba message age timer 0.00 designated port 8002 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags tap1 (3) port id 8003 state disabled designated root 8000.080027cabeba path cost 100 designated bridge 8000.080027cabeba message age timer 0.00 designated port 8003 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags Is there any way to set the tap interfaces in forwarding state? I do not understand why they are not because STP is disabled. Cheers Daniel

  Read the article

• Can't ping through default gateway

  - by Andrew G.H.

  I have the following configuration: Routing table on M3 is: Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 eth1 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.3.0 0.0.0.0 255.255.255.192 U 0 0 0 eth0 Routing table on M1 is: Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 So basically M3's gateway is M1, and M1's gateway is M2's wireless internet interface. If I ping 8.8.8.8 from M1, everything is ok, replies are received. Pinging from M1 to M3 and viceversa is also possible. I have configured M1 as gateway trafic forwarder using firestarter package and stopped firewall with it. iptables policies are ACCEPT for everything. Problem: I have tried ping-ing ip 8.8.8.8 from M3 but without success. What could be the source of this problem?

  Read the article

• What do I need to do to set my computer as Default Gateway?

  - by Vaibhav

  We are trying to put together a box with dual LAN cards (let's say Outer and Inner), where the Inner LAN card is supposed to act as a default gateway on the network it is connected to. This box is running Ubuntu. The basic purpose for this box is to take messages generated on the inner network, do some work with them and forward them out the Outer LAN card to a server. The inner network is completely isolated with simply a regular switch connecting the Inner LAN Card with two other boxes. These other boxes either throw out multi-cast messages (which the Inner LAN Card is listening to), or send out unicast messages meant for the server which is not on this inner network. So, we need the Inner LAN Card to act as a default gateway, where these unicast messages will then be sent, and the code on the dual-LAN Card box can then intercept and forward these messages to the server. Question: 1. How do we setup the LAN Card to be default gateway (does it need some configuration on Ubuntu)? 2. Once we have this setup, is it a simple matter of listening to the interface to intercept the incoming messages? Any help (pointers in the right direction) is appreciated. Thanks.

  Read the article

< Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >