Search Results

Search found 20360 results on 815 pages for 'capture output'.

Page 487/815 | < Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >

• Ubuntu stops auto-mounting flash drive

  - by Brian

  It seems that after being up for a few days, my Ubuntu system refuses to auto-mount hot-plugged USB disks (i.e. flash drives). The output from dmesg shows that the kernel recognizes the device correctly. The only solution I'm aware of at the moment is to reboot (logging out may work as well, but the impact is the same since I have a bunch of stuff open and it takes a few minutes to get everything situated after startup/login). I thought gvfs-fuse-daemon was the thing responsible for managing filesystems in userspace, but killing and restarting that doesn't help. Any other ideas?

  Read the article

• Can you downmix Windows 7 sound to mono?

  - by Breandán

  I need my Windows 7 64 bit machine to output mono downmixed sound. Downmixed, not just single channel (I'm deaf in one ear). Is there any possibility to force such behavior. I'm looking for a software solution to mix two channels into one. I know that some media players have this functionality, but I'd like the whole system (ie games, flash applications, etc) to produce downmixed audio. (If none exist then just one for Spotify and Windows Media Player would be handy). Cheers.

  Read the article

• Apache not serving pages stored in Subversion repository

  - by Stephen

  I've setup Apache and Subversion on an old PC, but Apache is not serving pages correctly, when I enter the address to my test site: http://HOME_IP_ADDRESS/test/index.html I just get a File Not Found error and the following output in the error log: File does not exist: /var/www/html/svn/repos/test but I know the file exists, when I enter the following URL into the browser: http://HOME_IP_ADDRESS/repos/test/index.html I just get a listing of the HTML. In my Apache config file I have the Document Root set as follows: DocumentRoot "/var/www/html/svn/repos" so I'm not sure what is going on, I have SVN installed and I think it may have something to do this. Edit * I changed the Document Root location, which helped as pages in the new location were served correctly, so the problem is with just serving the pages from the repository.

  Read the article

• Use test to check for condition with find and execdir option

  - by slosd

  I think I can keep my question short. Why does the following command produce no output? find /usr/share/themes -mindepth 1 -maxdepth 1 -type d -execdir test -d {}/gnome-shell \; I expected it to print all folders in /usr/share/themes that contain a folder gnome-shell. Several websites suggest that this usage of test as a command in exec/execdir is possible. From man find: -exec command ; Execute command; true if 0 status is returned. [...]

  Read the article

• Cannot dump svn repository

  - by vinga

  I've a problem with my svn repo. I cannot use it, I even cannot dump it. svnadmin verify repo returns Can't set position pointer in file 'svn/db/revs/0/0' When I try to dump repo (no matter what revision range), console output shows: * Dumped revision 0. svnadmin: Final line in revision file missing space I've googled that this may be connected with wrong version apr apache2 library, but I have other repositories which work good, so I thing this isn't the case. Is there any way to save at least some files from my repo? Can svn repo get corrupted so easily (probably after power-cut, however I'm not sure).

  Read the article

• How do I map a friendly name (e.g. www.example.com) to 127.0.0.1:port# on Mac OS X

  - by Fred Finkle

  I am trying to create a demo for a class of mine and I want to configure "fake" domain names on my laptop. A previous question "Can I specify a port in an entry in my /etc/hosts on OS X?" contained an answer indicating that to do it you must use /etc/hosts plus changes to the iptables "If OS X uses iptables you could point xyz.com to some ip in the hosts file like 157.166.226.25 and then: sudo iptables -t nat -A OUTPUT -p tcp --dport 80 -d 157.166.226.25 -j DNAT --to-destination 127.0.0.1:3000 " Since OS X doesn't use iptables, how do I do the equivalent using the tools available on OS X? (the original "asker" seemed to know how to do this, so it wasn't explained). Thanks in advance.

  Read the article

• how to monitor traffic at port 53 (DNS)

  - by Registered User

  I am a bit confused with the abundant tcpdump tutorials on internet. I am having a few of the virtual machines running on a virtualization server.Where I am debugging a problem.Port 53 is the one in problem. I have a bridged setup where out of 4 LAN cards on the machine in question one is active and it is xen-br0 I want to check if there is any request coming on port 53 on the server by other machines on LAN in question. I also want to see if the guest operating systems on LAN or any other machine is sending traffic at port 53.Due to abundant messages being generated via tcpdump I am finding it difficult to grep the output at desired port. So how can I use it if some one can give an example that would be helpful. Thanks in advance.

  Read the article

• WIndows 7: would like recursively check a directory for changes to files and folders since my last visit

  - by user1026169

  I have found varieties of this question. Most of them fall under monitoring and others are said to be buggy. A continuously monitoring program won't help me and neither will a list of the most recently modified files. I would like to check if the directory, its sub folders and files have changed since my last visit. It seems to me that I'd likely need a program that maintains and index of that directory and compares it with its condition when I tell it to. Then that program could output to a log for my use. This is on Windows 7 over a shared network, the folder(s) I'd like to check have 4-50GB of data. I did find this, however I am still learning how to program. I think it describes what I want: http://www.rgagnon.com/javadetails/java-0490.html Thanks for considering.

  Read the article

• Linux (lsusb) not showing String Descriptors of a USB device

  - by tzippy

  I have an embedded device that when plugged to a linux host, shows up with vid and pid that are not in the usb.ids file (proprietary IDs). However I provide String Descriptors that do show up when plugged into a Windows Host. But not on a Linux Host. lsusb -v shows only iManufacturer 3 iProduct 2 iSerial 1 But on the device side, when processing the setup requests, I see that the Strings are actually requested by the Host. By Windows and also the Linux Host. The USB Device Tree Viewwer under Windows shows this output: iManufacturer : 0x01 Language 0x0409 : "My Manufacturer" iProduct : 0x02 Language 0x0409 : "MyProduct" iSerialNumber : 0x03 Language 0x0409 : "My Serial" I feel that lsusb does not show all of the information. Is there a more informative tool?

  Read the article

• Remove folder structure from archive, ignore folder while archiving and fix error

  - by Michael

  I am trying to make a script to backup each of my plesk hosts to individual files, I am having two problems: I would like to remove the folder structure from archive, the tar is 3 folders deep I am getting this error: tar: Removing leading `/' from member names I need my archive to ignore folders named "catch" because I don't need them in my archive. The code: FILES=/var/www/vhosts/* FNAME="" for f in $FILES do FNAME=`basename $f` tar cfv "/root/backup/ftp/$FNAME.tar" $f done Sample output: tar: Removing leading `/' from member names /var/www/vhosts/mydomain.com/ /var/www/vhosts/mydomain.com/conf /var/www/vhosts/mydomain.com/etc/ /var/www/vhosts/mydomain.com/etc/group /var/www/vhosts/mydomain.com/etc/termcap /var/www/vhosts/mydomain.com/etc/passwd /var/www/vhosts/mydomain.com/usr/

  Read the article

• Is it safe to use an American power adapter in India and Australia?

  - by Stan

  I'm going to India and Australia on a business trip in a couple of days and plan to carry only a tablet instead of my trustworthy laptop (which got dunked in the tub by my oldest - don't ask). The adapter states the following: 100-240V~0.65A, 50/60Hz Output 12V===2A Will it be safe to use the adapter in these countries to charge my device, or do I have to buy new ones there? If the latter, what kind? What else should I take along with me? A surge protector?

  Read the article

• ripping interlaced video to 60fps (frames per second)

  - by cloneman

  It would appear that Broadcast Television is often 1080i30 (60 fields/s), and non-movie DVDs (example, instructional or TV shows) are 60fields/s as well, at some lower resolution (480i?) However, almost all video that ends up on the internet, whether in x264-encoded content, Youtube, etc. is 30 frames per second, that is to say , it is progressive scan. However, when you watch content on your TV, I'm guessing the TV converts it to progressive for you, but the end result is a very fluid picture that "feels" quite a bit like 60frames/s. What is the best way to obtain this result when ripping interlaced content sourced from TV or DVDs? Can I rip a DVD that is 60 fields per second to 60 frames per second? I would imagine classic deinterlace filters do not do this, they merge fields and create a 30fps output. I'm using handbrake.

  Read the article

• Redirect channel to another speaker

  - by stex

  Hi, I'm not sure about the title but don't know how to say it in a clearer way. My Soundcard is a Creative X-Fi and I'm using the Creative console starter. Now I'd like to use my speakers not only for my normal screens but also when using a beamer. Due to my room's geometry, the only place for the beamer's projection is a wall which is right to my normal screens (so the projection would be between the front right and the rear right speaker). Now I'm thinking about redirecting the channels to the correct speakers somehow. As far as I remember, in previous version of creative console starter there was an option to do this (e.g. redirect front left to rear right output channel). Does anyone know how to do this with software? Of course I could install a cable switch, but if there's a way without I'd prefer this :) Thanks in advance.

  Read the article

• Manage Kickstart library with Puppet

  - by Tim Brigham

  I maintain a library of different kickstart configurations, mostly for CentOS 5 and 6. It has recently gotten to the point I want to deduplicate as much of this information as possible. I am aware of a couple options out there which can dynamically generate kickstart files. Not interested at this point unless I really need to do that route. I would like to create my Kickstart files using a template along the following line: deploy1-centos5.erb .... install=http://.../$arch/... repo=http://.../$arch/... .... My output naming schema is "deploy1-centos5-x86_64". I'd like to be able to create several kickstart files from a given template, one for 32 bit, one 64, ppc, etc. This would work perfectly if I could readily set the value of arch per each time the template is called to create a file. What is the most ready way to address this?

  Read the article

• Increase Volume of an MKV Video from Linux Terminal

  - by The How-To Geek

  I've got a large amount of .MKV video files which seem to all play at a very low volume - I end up having to turn the TV up all the way to hear them, which is really irritating when I switch to another channel and wake the dead because it's so loud. What I'm looking for is a command-line method to increase the volume (so I can run it on all of them quickly) that would hopefully work regardless of the audio codec in use in the particular file. (I don't mind hard-coding the output audio though). For reference, I'm using Ubuntu 9.04 on my server, and the files are being played back with Boxee on a Mac Mini, but the volume problem is the same on Windows too.

  Read the article

• Google Analytics API data for goals (funnels) doesn't match - how do they reconcile?

  - by bkgraham

  I have a Google Analytics account with a well-functioning funnel made up of 4 goals. I can query the API and get the data out, but it does not match the funnel report in Analytics. Without getting into specific values, I can give you an example with faked data. Here's how the funnel might look: Shopping Cart 100 > 100 > 20 80 (80%) Address Page 5 > 85 > 25 60 (71%) Payment Page 2 > 62 > 10 52 (84%) Checkout 1 > 53 (49.07% funnel conversion rate) Okay, so you would expect the API to output data something like this: goal1Starts goal1Completions goal1Abandons 100 80 20 goal2Starts goal2Completions goal2Abandons 85 60 25 goal3Starts goal3Completions goal3Abandons 62 52 10 goal4Starts goal4Completions goal4Abandons 53 53 0 Instead, it's different. Firstly, the abandons are associated with the following goal (so goal1 always has 0 abandons and goal4 always has 0 abandons. Okay, I can work with that. What's confusing is that the numbers are always a little different. The goal1Completions always match the report, as do the goal4Completions, but everything else is off by a small amount. Sometimes it's only 2 visits, other times it's off by 50. For the report above here's the kind of results I would tend to get: goal1Starts goal1Completions goal1Abandons 100 100 0 goal2Starts goal2Completions goal2Abandons 105 84 21 goal3Starts goal3Completions goal3Abandons 90 65 25 goal4Starts goal4Completions goal4Abandons 58 53 5 Here's what I know: Goal(n)Completions + Goal(n)Abandons = Goal(n)Starts Goal(n)Starts = Goal(n-1)Completions Goal(n)Starts - Goal(n-1)Completions != reported number entering at that level That third one is particularly disappointing. So, here's my question: What data do I need to pull from the API in order to recreate the counts in the Funnel report in Google Analytics? I don't need the pages exited to entering from - just the counts at every level.

  Read the article

• UFW blocking webrick on port 3000

  - by t Book

  On a ubuntu 10.0.4 server runs redmine. starting webrick with: ./server webrick -e production -b lvps46-173-79-113.dedicated.hosteurope.de -d makes redmine available in browser. as soon as we enable ufw, webrick can´t be accessed anymore. of course we allowed Port 3000 from anywhere ufw allow 3000/tcp ufw allow 3000/udp also a grep for iptables doesn´t show a deny rule iptables -nL | grep 3000 find the whole iptables output here http://pastebin.com/k6WNqdPU checking lsof -ni tcp:2222 tells me ruby is listening on port 3000 ruby 3457 root 5u IPv4 864846667 0t0 TCP 46.173.79.113:3000 (LISTEN) What else can we check? what´s wrong with the ufw rules for port 3000?

  Read the article

• how to recover data from my disk - I accidentally copied with dd an iso on it

  - by sijoune

  I wanted to create a bootable usb from an iso image and i accidentally put as the output of the dd, instead of my usb drive, one of my hard disks. The iso was 3,3 GB and my disk is 1TB! And it was almost full. Can i at least restore the data that has not been overwritten? Right now i can't even mount it. I get this error: Error mounting /dev/sdd1 at /media/main/UDF Volume: Command-line `mount -t "udf" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,iocharset=utf8,umask=0077" "/dev/sdd1" "/media/main/UDF Volume"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/sdd1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Also since i know which filesystem my disk used if i reformat it to this filesystem is there any chance i can mount it and retrieve the rest of the files?

  Read the article

• Dump vim screen into a file

  - by user18151

  I need to dump whatever is seen on the vim screen as it is, with colors and everything. Is there a way do to id. I am hoping that ncurses uses the same escape sequence for colors as bash. So when I'll do cat on the file that I've dumped the screen to, I should get the same output as the vim file. I want to use it in the scenario when I am doing a side by side colorful diff of files and need to print them. If anyone knows of any other side-by-side colorful diff programs, please feel free to mention in the comments (not answers because I am hoping that this question will be answered so that it can be used by others).

  Read the article

• List files recursively and sort by modification time

  - by Problemaniac

  How do I list all files under a directory recursively and sort the output by modification time? I normally use ls -lhtc but it doesn't find all files recursively. I am using Linux and Mac. ls -l on Mac OS X can give -rw-r--r-- 1 fsr user 1928 Mar 1 2011 foo.c -rwx------ 1 fsr user 3509 Feb 25 14:34 bar.c where the date part isn't consistent or aligned, so a solution have to take this into account. Partial solution stat -f "%m%t%Sm %N" ./* | sort -rn | head -3 | cut -f2- works, but not recursively.

  Read the article

• Accessing a broken mdadm raid

  - by CarstenCarsten

  Hi! I used a western digital mybookworld (SOHO NAS storage using Linux) as backup for my Linux box. Suddenly, the mybookworld does not boot up any more. So I opened the box, removed the hard disk and put the hard disk into an external USB HDD case, and connected it to my Linux box. [ 530.640301] usb 2-1: new high speed USB device using ehci_hcd and address 3 [ 530.797630] scsi7 : usb-storage 2-1:1.0 [ 531.794844] scsi 7:0:0:0: Direct-Access WDC WD75 00AAKS-00RBA0 PQ: 0 ANSI: 2 [ 531.796490] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 531.797966] sd 7:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 531.800317] sd 7:0:0:0: [sdc] Write Protect is off [ 531.800327] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 531.800333] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803821] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.803836] sdc: sdc1 sdc2 sdc3 sdc4 [ 531.815831] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 531.815842] sd 7:0:0:0: [sdc] Attached SCSI disk The dmesg output looks normal, but I was wondering why the hardisk was not mounted at all. And why there are 4 different partitions on it. fdisk showed the following: root@ubuntu:/home/ubuntu# fdisk /dev/sdc WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdc: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00007c00 Device Boot Start End Blocks Id System /dev/sdc1 4 369 2939895 fd Linux raid autodetect /dev/sdc2 370 382 104422+ fd Linux raid autodetect /dev/sdc3 383 505 987997+ fd Linux raid autodetect /dev/sdc4 506 91201 728515620 fd Linux raid autodetect Oh no! Everything seems to be created as a mdadm software raid. Calling mdadm --examine with the different partitions seems to affirm that. I think the only partition I am interested in, is /dev/sdc4 (because it is the largest). But nevertheless I called mdadm --examine with every partition. root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 00.90.00 UUID : 5626a2d8:070ad992:ef1c8d24:cd8e13e4 Creation Time : Wed Feb 20 00:57:49 2002 Raid Level : raid1 Used Dev Size : 2939776 (2.80 GiB 3.01 GB) Array Size : 2939776 (2.80 GiB 3.01 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 1 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 4c90bc55 - correct Events : 16682 Number Major Minor RaidDevice State this 0 8 1 0 active sync /dev/sda1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 00.90.00 UUID : 9734b3ee:2d5af206:05fe3413:585f7f26 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 104320 (101.89 MiB 106.82 MB) Array Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 2 Update Time : Wed Oct 27 20:19:08 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 55560b40 - correct Events : 9884 Number Major Minor RaidDevice State this 0 8 2 0 active sync /dev/sda2 0 0 8 2 0 active sync /dev/sda2 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc3 /dev/sdc3: Magic : a92b4efc Version : 00.90.00 UUID : 08f30b4f:91cca15d:2332bfef:48e67824 Creation Time : Wed Feb 20 00:57:54 2002 Raid Level : raid1 Used Dev Size : 987904 (964.91 MiB 1011.61 MB) Array Size : 987904 (964.91 MiB 1011.61 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 3 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 39717874 - correct Events : 73678 Number Major Minor RaidDevice State this 0 8 3 0 active sync 0 0 8 3 0 active sync 1 1 0 0 1 faulty removed root@ubuntu:/home/ubuntu# mdadm --examine /dev/sdc4 /dev/sdc4: Magic : a92b4efc Version : 00.90.00 UUID : febb75ca:e9d1ce18:f14cc006:f759419a Creation Time : Wed Feb 20 00:57:55 2002 Raid Level : raid1 Used Dev Size : 728515520 (694.77 GiB 746.00 GB) Array Size : 728515520 (694.77 GiB 746.00 GB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 4 Update Time : Sun Nov 21 11:05:27 2010 State : clean Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Checksum : 2f36a392 - correct Events : 519320 Number Major Minor RaidDevice State this 0 8 4 0 active sync 0 0 8 4 0 active sync 1 1 0 0 1 faulty removed If I read the output correctly everything was removed, because it was faulty. Is there ANY way to see the contents of the largest partition? Or seeing somehow which files are broken? I see that everything is raid1 which is only mirroring, so this should be a normal partition. I am anxious to do anything with mdadm, in fear that I destroy the data on the hard disk. I would be very thankful for any help.

  Read the article

• How can I get Windows 7 to switch audio from a monitor (with built-in speakers) to headphones when t

  - by tnorthcutt

  I have an HP dv5t laptop running Windows 7 64 bit with an Acer H235H monitor connected to it via an HDMI cable. The monitor has built-in speakers, which are a huge improvement over the laptop's speakers. However, when I want to use headphones, right now, I have to connect them to the laptop, then right-click the sound icon in the task bar, select Playback Devices, right click the monitor, and disable it. Is there any way to get Windows 7 to automatically switch the output to the headphones when they're plugged in? That's the behavior that happens without the monitor attached (i.e. it will switch from the laptop speakers to headphones when headphones are plugged in). I have the same issue with a Sony Vaio laptop running Windows 7 64-bit and an identical monitor, for reference.

  Read the article

• How to make vim display unicode

  - by Yitzchak

  I am trying to work with a utf-8 encoded xml file in vim 7.3 running on ubuntu. ASCII characters display normally but vim gives me gibberish instead of the unicode characters. After trying the following, I've reached the limits of my knowledge: 1) Checked that unicode was enabled by running set termencoding?. Output was termencoding=utf-8. 2) I installed the script from here (vim.org/scripts) 3) moved my ~/.vimrc file into ~/.vim 4) moved it back into ~ 5) followed the instructions in the accepted answer to this question. Is there some other variable I'm supposed to set? I know my system has the fonts I need. Update: Issue seems to be limited to html files for some reason.

  Read the article

• Synced audio ouput on multiple machines? VLC? hardware solutions?

  - by zimmer62

  I'm wondering if there is any software or hardware solutions to synced audio or audio and video across multiple computers or devices on a network. I've seen Sonos, and it might be a good solution, but it's also a very expensive solution. I'd like to be able to play something with realtime audio output on one PC, but hear it on speakers throughout the house, being it the home theater receiver, or another computer in another room. I saw a solution using the apple iport express, but the latency was unacceptable for anything other than just music. I'd like to avoid running audio wires with baluns to a bunch of amplifiers scattered all over the place when I have cat5 run everywhere. Is anyone familiar with using this kind of process for whole home audio? The latency is a big deal for me, if I've got video attached to the sound (e.g. watching a hockey game)

  Read the article

• how do I list Distribution Group (List) and their members inside of an OU using AD or exchange 2010

  - by wraak

  our entire domain has thousands of distribution groups, while i can use the script referenced here: How to get a list of all Distribution Lists and their Members in Exchange 2007? to pull all distribution groups and their members, it would be too hard to filter through all results. I particularilly need to pull either a. (preferred) all groups (both distribution and security) and their members inside of an OU (this particular OU contains over 100 hundred groups) or b. all groups and members matching a name starting with exampl* dsquery | dsget looks like could almost serve that purpose however when i did: dsquery group "OU=my-department,DC=blah,DC=blahblah,DC=com" -name * | dsget group -members (-expand) c:\my-department.txt it displays only the members without showing which group they belong to. The output I need should have: group name, members and potentially expanded sub-groups. i am still researching on how to get this done, seems like i can somehow make the above referenced script to search only inside of an OU, but i am not very familiar with powershell. any help would be appreciated, thank you.

  Read the article

< Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >