anonymous objects - Page 492

Why is my new Phenom II 965 BE not significantly faster than my old Athlon 64 X2 4600+?

- by Software Monkey

I recently rebuilt my 5 year old computer. I upgraded all core components, in particular from an Athlon 64 X2 4600+ at 2.4 GHz with DDR2 800 to a Phenom II 965 BE (quad core) at 3.6 GHz with DDR3 1333 (actually 1600, but testing consistently detected memory errors at 1600). The motherboard is also much newer and better. The HDD's (x3), DVD writer and card reader are the same. The BIOS memory config is auto-everything except the base timing which I overrode to 1T instead of 2T. The BIOS CPU multiplier is slightly over-clocked to 3.6 GHz from the stock 3.4 GHz. I noticed compiling Java is slower than I expected. As it happens I have some (single-threaded) Java pattern-matching code which is CPU and memory bound and for which I have performance numbers recorded on a number of hardware platforms, including my old system. So I did a test run on the new equipment and was stunned to find that the numbers are only slightly better than my old system, about 25%. The data set it is operating on is a 148,975 character array, which should easily fit in caches, but in any event the new CPU has larger caches all around. The system was, of course, otherwise idle for the test and the test run is a timed 10 seconds to eliminate scheduling anomalies. A long while ago, when I upgraded only memory from DD2 667 to DDR2 800 there was no change in performance of this test, which subjectively supports that the test cycle does not need to (significantly) access main memory, but yes it is creating and garbage collecting a large number of objects in the process of this test (low millions of matches are found for the pattern set). I am about 99.999% certain the code hasn't changed since I last ran it on 2009-03-17 - but I can't easily retest the old hardware, because it is currently in pieces on my work-bench waiting to be built into a new computer for my kids. Note that Windows (XP) reports a CPU speed of 795 MHz unless I have some thing running. With stuff running it seems to jump all over the place each time I use ALT-Pause to display the system properties, everywhere from 795 MHz to 3.4 Ghz. So why might my shiny new hardware under-performing so badly? EDIT: The old memory was Mushkin DDR2 800 with timings set for auto which should have been 5-5-5-12. The new memory is Corsair DDR3 1600, running at 1333 with timings also auto which are 9-9-9-21. In both cases they are a paired set of dual channel DIMMs. I was waiting to ensure my system was stable before tweaking with memory timings.

Read the article

NX Client for Windows 7 Opens Remote Desktop in Multiple Windows

- by Corey Kennedy

What I'm trying to do: access my Ubuntu desktop remotely via NX Client on my Windows 7 laptop. My environment: server: Ubuntu 10.10 on AMD 1Ghz/512MB RAM PC client: Windows 7 on ThinkPad sl510 Software: server is running NXServer 3.4.0. Using xfce4 window manager. Laptop is using NXClient for Windows In my NX Client "Desktop" settings I've selected "Unix" and "Custom" for OS and environment. I've also specified "startxfce4" as the application to launch when NX connects. I am able to authenticate an NX session on my laptop. By this I mean, I can start the client on my laptop, enter credentials for my Linux user, and NX establishes a connection to the server and attempts to open a remote desktop window. The problem, though, is that this remote desktop is "fragmented" into many Windows. One window will display the bulk of my desktop (complete with desktop icons for "Home," "File System," and "Trash") while another window will contain the taskbar, and another window will contain the application strip. I can select each of these Windows individually, but I cannot click on any objects within them. I've searched Super User, Ubuntu Forums, NX help, Server Fault, and tried many Google searches - none have turned up another case of this particular problem. I'm stumped. Does anyone have any suggestions for what I might try? I'm guessing the problem has to do with my xfce config files, but I've only just setup this server - it's been a long time since I've used Linux and there's a lot I just don't know. What I am NOT trying to do: use Desktop sharing from Ubuntu, whereby I VNC into a desktop that I've already established on the server. I am trying to configure this Linux box as a headless server that I can stash someplace out-of-the-way in my house, then interact with through my laptop. I don't want to have a monitor or keyboard connected to the Linux box. Thanks for your help! edit: 1/19/2011 Well, this is truly bizarre. To my knowledge I've made no changes to either system - the laptop or the server. But today after starting up the server for the first time in a few days, and making sure that nxserver was running, I was able to connect with the nxclient from my laptop with no problems. I have a full desktop in a single window and I am able to interact with it normally. This is really weird, but the problem seems to be resolved.

Read the article

Generating/managing config files for hosted application

- by mfinni

I asked a question about config management, and haven't seen a reply. It's possible my question was too vague, so let's get down to brass tacks. Here's the process we follow when onboarding a new customer instance into our hosted application : how would you manage this? I'm leaning towards a Perl script to populate templates to generate shell scripts, config files, XML config files, etc. Looking briefly at CFengine and Chef, it seems like they're not going to reduce the amount of work, because I'd still have to manually specify all of the changes/edits within the tool. Doesn't seem to be much of a gain over touching the config files directly. We add a stanza to the main config file for the core (3rd-party) application. This stanza has values that defines the instance (customer) name the TCP listener port for this instance (not one currently used) the DB2 database name (serial numeric identifier, already exists, they get prestaged for us by the DBAs) three sub-config files, by name - they need to be created from 3 templates and be named after the instance The sub-config files define: The filepath for the DB2 volumes The filepath for the storage of objects The filepath for just one of the DB2 volumes (yes, redundant to the first item. We run some application commands, start the instance We do some LDAP thingies (make an OU for the instance, etc.) We add a stanza to the config file for our security listener that acts as a passthrough to LDAP instance name LDAP OU TCP port for instance DB2 database name We restart the security listener (off-hours), change the main config file from item 1, stop and restart the instance. It is now authenticating via LDAP. We add the stop and start commands for this instance to the HA failover scripts. We import an XML config file into the instance that defines things for the actual application for the customer - user names, groups, permissions, and business rules. The XML is supplied by the implementation team. Now, we configure the dataloading application We add a stanza to the existing top-level config file that points to a new customer-level config file. The new customer-level config file includes: the instance (customer) name the DB2 database name arbitrary number of sub-config files, by name Each of the sub-config files defines: filepaths to the directories for ingestion, feedback, backup, and failure those filepaths have a common path to a customer-specific folder, and then one folder for each sub-config file Each of those filepaths needs to be created We need to add this customer instance to our monitoring scripts that confirm the proper processes are running and can be logged into. Of course, those monitoring config files include the instance name, the TCP port, the DB2 database name, etc. There's also a reporting application that needs to be configured for the new instance. You get the idea. There's also XML that is loaded into WAS by the middleware team. We give them the values for them to plug into the XML - they could very easily hand us the template and we could give them back completed XML.

Read the article

LACP : Cisco ASA 5515 & Switch ProCurve 2920

- by user979276

I've two ASAs 5515 connected in failover Active/Stand by (on Gi0/5) My two ASAs are connected to two Switch ProCurve 2920 to have HA if something happens. So I plug something like that (don't pay attention to the arrows) : So one the ASA, I created a Port-Channel like that : interface GigabitEthernet0/0 nameif outside security-level 0 ip address 192.168.1.3 255.255.255.0 standby 192.168.1.4 ! interface GigabitEthernet0/1 speed 1000 duplex full channel-group 1 mode passive no nameif no security-level no ip address ! interface GigabitEthernet0/2 speed 1000 duplex full channel-group 1 mode passive no nameif no security-level no ip address ! interface Port-channel1.1 vlan 1 nameif inside security-level 100 ip address 192.168.8.1 255.255.255.0 standby 192.168.8.2 ! interface Port-channel1.10 vlan 10 nameif guest security-level 50 ip address 172.16.100.2 255.255.255.224 standby 172.16.100.3 ! interface Port-channel1.16 vlan 16 nameif dmz security-level 50 ip address 192.168.16.1 255.255.255.0 standby 192.168.16.2 On the switch, I created a trunk LACP capable with the port 1 and 2 on each switch, force the speed to 1000 and put the port un full duplex mode. BUT this is not working... I tried many things and I can't make it work. In this configuration, I can't ping anything between my ASA and my Switch (or any object connected). Here what I get on my ASA : Channel group 1 LACP port Admin Oper Port Port Port Flags State Priority Key Key Number State ----------------------------------------------------------------------------- Gi0/2 SP not-bndl 32768 0x1 0x1 0x3 0xc Gi0/1 FP not-bndl 32768 0x1 0x1 0x2 0x6 And on the Switchs : PORT LACP TRUNK PORT LACP LACP NUMB ENABLED GROUP STATUS PARTNER STATUS ----- ------- ----- ------ ------- ------ 1 Active trk1 Broken Yes Failure 2 Active trk1 Broken Yes Failure If I change the Cisco interface to LACP mode On, I can ping the switch from the ASA but nothing other objects conneted on the switch. If I look at the statut of LACP on the switch I see this : PORT LACP TRUNK PORT LACP LACP NUMB ENABLED GROUP STATUS PARTNER STATUS ----- ------- ----- ------ ------- ------ 1 Active trk1 Up No Success 2 Active trk1 Up No Success I don't have any clue on what's going on so If someone have any idea and help me on this, it would be great ! Feel free to ask me anything if you need any more information ! Thanks a lot !

Read the article

How to keep group-writeable shares on Samba with OSX clients?

- by Oliver Salzburg

I have a FreeNAS server on a network with OSX and Windows clients. When the OSX clients interact with SMB/CIFS shares on the server, they are causing permission problems for all other clients. Update: I can no longer verify any answers because we abandoned the project, but feel free to post any help for future visitors. The details of this behavior seem to also be dependent on the version of OSX the client is running. For this question, let's assume a client running 10.8.2. When I mount the CIFS share on an OSX client and create a new directory on it, the directory will be created with drwxr-x-rx permissions. This is undesirable because it will not allow anyone but me to write to the directory. There are other users in my group which should have write permissions as well. This behavior happens even though the following settings are present in smb.conf on the server: [global] create mask= 0666 directory mask= 0777 [share] force directory mode= 0775 force create mode= 0660 I was under the impression that these settings should make sure that directories are at least created with rwxrwxr-x permissions. But, I guess, that doesn't stop the client from changing the permissions after creating the directory. When I create a folder on the same share from a Windows client, the new folder will have the desired access permissions (rwxrwxrwx), so I'm currently assuming that the problem lies with the OSX client. I guess this wouldn't be such an issue if you could easily change the permissions of the directories you've created, but you can't. When opening the directory info in Finder, I get the old "You have custom access" notice with no ability to make any changes. I'm assuming that this is caused because we're using Windows ACLs on the share, but that's just a wild guess. Changing the write permissions for the group through the terminal works fine, but this is unpractical for the deployment and unreasonable to expect from anyone to do. This is the complete smb.conf: [global] encrypt passwords = yes dns proxy = no strict locking = no read raw = yes write raw = yes oplocks = yes max xmit = 65535 deadtime = 15 display charset = LOCALE max log size = 10 syslog only = yes syslog = 1 load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes smb passwd file = /var/etc/private/smbpasswd private dir = /var/etc/private getwd cache = yes guest account = nobody map to guest = Bad Password obey pam restrictions = Yes # NOTE: read smb.conf. directory name cache size = 0 max protocol = SMB2 netbios name = freenas workgroup = COMPANY server string = FreeNAS Server store dos attributes = yes hostname lookups = yes security = user passdb backend = ldapsam:ldap://ldap.company.local ldap admin dn = cn=admin,dc=company,dc=local ldap suffix = dc=company,dc=local ldap user suffix = ou=Users ldap group suffix = ou=Groups ldap machine suffix = ou=Computers ldap ssl = off ldap replication sleep = 1000 ldap passwd sync = yes #ldap debug level = 1 #ldap debug threshold = 1 ldapsam:trusted = yes idmap uid = 10000-39999 idmap gid = 10000-39999 create mask = 0666 directory mask = 0777 client ntlmv2 auth = yes dos charset = CP437 unix charset = UTF-8 log level = 1 [share] path = /mnt/zfs0 printable = no veto files = /.snap/.windows/.zfs/ writeable = yes browseable = yes inherit owner = no inherit permissions = no vfs objects = zfsacl guest ok = no inherit acls = Yes map archive = No map readonly = no nfs4:mode = special nfs4:acedup = merge nfs4:chown = yes hide dot files force directory mode = 0775 force create mode = 0660

Read the article

SQL Server database filled the hard drive and freeing up space isn't possible

- by Jon

I have a database in SQL Server 2008 on a 1Tb hard drive and it filled the drive, there is only 4Kb free. The MDF file is 323Gb and the LDF is 653Gb. The hard disk this DB is on has no other files on it other than the MDF and LDF so it's impossible to free up any space on the drive. The main hard disk is smaller but there is enough room to transfer the MDF to that drive, in case that helps. This server is overseas at a customer site and it's not possible at the moment to add more disk space to the server. It's also not possible to delete any records because the DB is in a failed mode (due to no disk space) and it doesn't respond to most commands. The Db is currently in full recovery mode which is why the LDF file is so large. This DB really doesn't need to be in full recovery so going forward we plan on switching it to simple mode which will save us a lot of space. I also don't care about losing the LDF file, but I need all of the data. I've spent a lot of time looking for a way out of this problem but everything I've found first involves either freeing up disk space or adding more disk space, neither of which is an option at this time. I'm stuck and any help would be greatly appreciated. I get the following log when trying to switch the DB to online mode. Msg 945, Level 14, State 2, Line 3 Database 'DBNAME' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. Msg 5069, Level 16, State 1, Line 3 ALTER DATABASE statement failed. Msg 1101, Level 17, State 12, Line 3 Could not allocate a new page for database 'DBNAME' because of insufficient disk space in filegroup 'DEFAULT'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. I've found the following solutions but none work due to having no disk space on that drive, and since the DB is in a failed state I can't run most commmands. - DBCC SHRINKFILE - can't be run because doing a 'use DBNAME' fails - Detaching the DB and then changing the location of the MDF/LDF files, this fails because the DB is in an offline mode so you can't run detach. I'm at a loss about what else to try. Thanks.

Read the article

VIM "upgraded" to expandtab and tabstop=8 on Python files

- by dotancohen

After reinstalling my OS from Kubuntu 12.10 to Kubuntu 14.04, VIM has changed its behaviour when editing Python files. Though before the reinstall all file types had noexpandtab and tabstop=4 set, now in Python those values are expandtab and tabstop=8, checked also via VIM behaviour and also via asking VIM set foo?. Non-Python files retain the noexpandtab and tabstop=4 behaviour that I prefer. The .vim direcotry and .vimrc were not touched during the reinstall. It can be seen that no files in .vimrc have been touched in months (with the exception of the irrelevant .netrwhist): - bruno():~$ ls -lat ~/.vim total 68 drwxr-xr-x 85 dotancohen dotancohen 12288 Aug 25 13:00 .. drwxr-xr-x 12 dotancohen dotancohen 4096 Aug 21 11:11 . -rw-r--r-- 1 dotancohen dotancohen 268 Aug 21 11:11 .netrwhist drwxr-xr-x 2 dotancohen dotancohen 4096 Mar 6 18:31 plugin drwxr-xr-x 2 dotancohen dotancohen 4096 Mar 6 18:31 doc drwxrwxr-x 2 dotancohen dotancohen 4096 Nov 29 2013 syntax drwxrwxr-x 2 dotancohen dotancohen 4096 Nov 29 2013 ftplugin drwxr-xr-x 4 dotancohen dotancohen 4096 Nov 29 2013 autoload drwxrwxr-x 5 dotancohen dotancohen 4096 May 27 2013 after drwxr-xr-x 2 dotancohen dotancohen 4096 Nov 1 2012 spell -rw------- 1 dotancohen dotancohen 138 Aug 14 2012 .directory -rw-rw-r-- 1 dotancohen dotancohen 190 Jul 3 2012 .VimballRecord drwxrwxr-x 2 dotancohen dotancohen 4096 May 12 2012 colors drwxrwxr-x 2 dotancohen dotancohen 4096 Mar 16 2012 mytags drwxrwxr-x 2 dotancohen dotancohen 4096 Feb 14 2012 keymap Though .vimrc has been touched since the reinstall, it was only me testing to see where the problem is. How can I tell what is settingexpandtab and tabstop? Side note: I'm not even sure what I should read in the built-in help for this issue. I started with ":h plugin" but that did not help other than showing me that the following plugins are loaded (possibly relevant): standard-plugin-list Standard plugins pi_getscript.txt Downloading latest version of Vim scripts pi_gzip.txt Reading and writing compressed files pi_netrw.txt Reading and writing files over a network pi_paren.txt Highlight matching parens pi_tar.txt Tar file explorer pi_vimball.txt Create a self-installing Vim script pi_zip.txt Zip archive explorer LOCAL ADDITIONS: local-additions DynamicSigns.txt - Using Signs for different things NrrwRgn.txt A Narrow Region Plugin (similar to Emacs) fugitive.txt A Git wrapper so awesome, it should be illegal indent-object.txt Text objects based on indent levels. taglist.txt Plugin for browsing source code vimwiki.txt A Personal Wiki for Vim

Read the article

amazon ec2 ubuntu with gitlab and nginx - cant load?

- by thebluefox

Ok, so I've spooled up an Amazon EC2 server running Ubuntu, and then followed the instructions below to install GitLab; http://doc.gitlab.com/ce/install/installation.html The only step I've not been able to complete is running the following check on the status; sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production I get the following error; rake aborted! Errno::ENOMEM: Cannot allocate memory - whoami Which I presume is becuase my EC2 is just running a free tier setup, so isn't that well spec'd. Regardless, I've been trying to access this through my browser. I've set up the elastic IP and pointed my domain at it (for the purpose of this, lets say its git.mydom.co.uk). Doing a whois on this domain shows me its pointing to the right place. For some reason though, I get the "Oops, Chrome could not connect to git.mydom.co.uk". Now - for a period of time I was getting the Nginx holding page (telling me I still needed to perform configuration). This though disappeared after removing the default file from /etc/nginx/sites-enabled/ (after reading this could be issue on a troubleshooting page). Since then, I've had nothing, even when I symlinked the file back in from /sites-available. I've tried changing the owner of the git.mydom.co.uk file sat inside /sites-enabled and /sites-available to www-data, as suggested here, but I could only change the permission of the file in /sites-available, and not the symlinked one in /sites-enabled. The content of this file is as follows; upstream gitlab { server unix:/home/git/gitlab/tmp/sockets/gitlab.socket; } server { listen *:80 default_server; # e.g., listen 192.168.1.1:80; In most cases *:80 is a good idea server_name git.mydom.co.uk; # e.g., server_name source.example.com; server_tokens off; # don't show the version number, a security best practice root /home/git/gitlab/public; # Increase this if you want to upload large attachments # Or if you want to accept large git objects over http client_max_body_size 20m; # individual nginx logs for this gitlab vhost access_log /var/log/nginx/gitlab_access.log; error_log /var/log/nginx/gitlab_error.log; location / { # serve static files from defined root folder;. # @gitlab is a named location for the upstream fallback, see below try_files $uri $uri/index.html $uri.html @gitlab; } All the paths mentioned in here look ok...I'm about at the end of my knowledge now!

Read the article

Why is Varnish not caching?

- by Justin

I am troubleshooting the setup of Varnish 3.x on my Ubuntu server. I'm running Drupal 7 on two sites set up on the box, via named-based vhosts. Before trying to get Varnish to play nice with Drupal I'm trying to just get Varnish to a PNG from cache. Here are the headers I get from a curl -I request of the PNG file: HTTP/1.1 200 OK Server: Apache/2.2.22 (Ubuntu) Last-Modified: Sun, 07 Oct 2012 21:18:59 GMT ETag: "a57c2-3850-4cb7ea73db6c0" Accept-Ranges: bytes Content-Length: 14416 Cache-Control: max-age=1209600 Expires: Thu, 25 Oct 2012 22:55:14 GMT Content-Type: image/png Accept-Ranges: bytes Date: Thu, 11 Oct 2012 22:55:14 GMT X-Varnish: 1766703058 Age: 0 Via: 1.1 varnish Connection: keep-alive X-Varnish-Cache: MISS Here is the Varnish VCL file I'm using (It's a default VCL configuration designed for Drupal): # Default backend definition. Set this to point to your content # server. # backend default { .host = "127.0.0.1"; .port = "8080"; } # Respond to incoming requests. sub vcl_recv { # Use anonymous, cached pages if all backends are down. if (!req.backend.healthy) { unset req.http.Cookie; } # Allow the backend to serve up stale content if it is responding slowly. set req.grace = 6h; # Pipe these paths directly to Apache for streaming. #if (req.url ~ "^/admin/content/backup_migrate/export") { # return (pipe); #} # Do not cache these paths. if (req.url ~ "^/status\.php$" || req.url ~ "^/update\.php$" || req.url ~ "^/admin$" || req.url ~ "^/admin/.*$" || req.url ~ "^/flag/.*$" || req.url ~ "^.*/ajax/.*$" || req.url ~ "^.*/ahah/.*$") { return (pass); } # Do not allow outside access to cron.php or install.php. #if (req.url ~ "^/(cron|install)\.php$" && !client.ip ~ internal) { # Have Varnish throw the error directly. # error 404 "Page not found."; # Use a custom error page that you've defined in Drupal at the path "404". # set req.url = "/404"; #} # Always cache the following file types for all users. This list of extensions # appears twice, once here and again in vcl_fetch so make sure you edit both # and keep them equal. if (req.url ~ "(?i)\.(pdf|asc|dat|txt|doc|xls|ppt|tgz|csv|png|gif|jpeg|jpg|ico|swf|css|js)(\?.*)?$") { unset req.http.Cookie; } # Remove all cookies that Drupal doesn't need to know about. We explicitly # list the ones that Drupal does need, the SESS and NO_CACHE. If, after # running this code we find that either of these two cookies remains, we # will pass as the page cannot be cached. if (req.http.Cookie) { # 1. Append a semi-colon to the front of the cookie string. # 2. Remove all spaces that appear after semi-colons. # 3. Match the cookies we want to keep, adding the space we removed # previously back. (\1) is first matching group in the regsuball. # 4. Remove all other cookies, identifying them by the fact that they have # no space after the preceding semi-colon. # 5. Remove all spaces and semi-colons from the beginning and end of the # cookie string. set req.http.Cookie = ";" + req.http.Cookie; set req.http.Cookie = regsuball(req.http.Cookie, "; +", ";"); set req.http.Cookie = regsuball(req.http.Cookie, ";(SESS[a-z0-9]+|SSESS[a-z0-9]+|NO_CACHE)=", "; \1="); set req.http.Cookie = regsuball(req.http.Cookie, ";[^ ][^;]*", ""); set req.http.Cookie = regsuball(req.http.Cookie, "^[; ]+|[; ]+$", ""); if (req.http.Cookie == "") { # If there are no remaining cookies, remove the cookie header. If there # aren't any cookie headers, Varnish's default behavior will be to cache # the page. unset req.http.Cookie; } else { # If there is any cookies left (a session or NO_CACHE cookie), do not # cache the page. Pass it on to Apache directly. return (pass); } } } # Set a header to track a cache HIT/MISS. sub vcl_deliver { if (obj.hits > 0) { set resp.http.X-Varnish-Cache = "HIT"; } else { set resp.http.X-Varnish-Cache = "MISS"; } } # Code determining what to do when serving items from the Apache servers. # beresp == Back-end response from the web server. sub vcl_fetch { # We need this to cache 404s, 301s, 500s. Otherwise, depending on backend but # definitely in Drupal's case these responses are not cacheable by default. if (beresp.status == 404 || beresp.status == 301 || beresp.status == 500) { set beresp.ttl = 10m; } # Don't allow static files to set cookies. # (?i) denotes case insensitive in PCRE (perl compatible regular expressions). # This list of extensions appears twice, once here and again in vcl_recv so # make sure you edit both and keep them equal. if (req.url ~ "(?i)\.(pdf|asc|dat|txt|doc|xls|ppt|tgz|csv|png|gif|jpeg|jpg|ico|swf|css|js)(\?.*)?$") { unset beresp.http.set-cookie; } # Allow items to be stale if needed. set beresp.grace = 6h; } # In the event of an error, show friendlier messages. sub vcl_error { # Redirect to some other URL in the case of a homepage failure. #if (req.url ~ "^/?$") { # set obj.status = 302; # set obj.http.Location = "http://backup.example.com/"; #} # Otherwise redirect to the homepage, which will likely be in the cache. set obj.http.Content-Type = "text/html; charset=utf-8"; synthetic {" <html> <head> <title>Page Unavailable</title> <style> body { background: #303030; text-align: center; color: white; } #page { border: 1px solid #CCC; width: 500px; margin: 100px auto 0; padding: 30px; background: #323232; } a, a:link, a:visited { color: #CCC; } .error { color: #222; } </style> </head> <body onload="setTimeout(function() { window.location = '/' }, 5000)"> <div id="page"> <h1 class="title">Page Unavailable</h1> <p>The page you requested is temporarily unavailable.</p> <p>We're redirecting you to the <a href="/">homepage</a> in 5 seconds.</p> <div class="error">(Error "} + obj.status + " " + obj.response + {")</div> </div> </body> </html> "}; return (deliver); } I'm getting a MISS and age 0 every time. If I'm understanding correctly, this means the file isn't being returned from Varnish's cache. Is there a problem with my Varnish config?

Read the article

Triple (3) Monitors under Linux

- by widgisoft

I have a 3 monitor setup (each 1680x1050) via an Nvidia NVS440 (2 GPUs, 2 outputs per GPU totalling 4 outputs); this works fine under Windows XP,7 but caused considerable headaches under Linux (Ubuntu 9.04). I had previously used an XFX 9600GT and the onboard XFX 9300GS to produce the same result but the card was noisy and power hungry and I was hoping that there was some magical switch in the NVS4400 that got rid of this annoying problem - turns out the NVS440 is just 2 cards on one physical PCB :-p (I searched the net high and low for people using this card under Linux but found nothing, if anything the card uses less power and is fan less so I was to benefit from it either way) Anyway, using either set up there were 5 solutions available: Have 3 separate X instances, all un joined Have 3 separate X instances, adjoined by Xinerama Have 2 separate X instances - One using twin-view, both adjoined by Xinerama Have 2 separate X instances - One using twin-view but no Xinerama Have a single Twin-view setup and leave the 3rd screen unplugged :-p The 4rd option, using 2 separate X instances and twinview (but no xinerama) was the best balance in terms of performance and usability but caused 2 really annoying issues You couldn't control (without altering the shortcuts) which screen an application opened onto - and once it was opened you couldn't move it to another screen without opening up terminal and forcing it to move Nvidia's overriding or falsifying of Xinerama breaks and the 2 screens joined by Twin view behave like a single huge screen causing popups to open in the middle of both screens and maximising of windows stretches to the width of the first 2 screens Firefox can only run one instance as the same user so having multiple firefox windows requires at least 2 users The second option "feels" like the right option, but OpenGL is basically disabled and playing any sort of game or even running anything graphical causes a huge performance drop and instability - even trying to run a basic emulator for gba or gens just causes the system to fall over. It works just enough to stare at your desktop and do nothing but as soon as you start doing some work - opening windows, dragging things around - running multiple copies of firefox it just really feels slow. The last open, only going dual screen works perfectly and everything performs as required, full GPU acceleration - two logical screen spaces - perfect, just make it work across GPUs like windows! :-p Anyway, I know RandR was supposed to pick up the slack when it would introduced GPU objects of sorts to allow multiple GPUs to be stitched together to create one huge desktop at a much deeper layer than Xinerama. I was wondering if this has now been fixed (I noticed X server 1.7 is out) and whether anyone has got it running successfully? Again, my requirements are: One huge desktop to drag any window across Maximising of windows to each screen (as XP does) Running fullscreen apps on the primary screen and disabling the mouse from moving onto the others or on all 3 stretched Finally as a side note; I am aware of the Matrox triple (and dual) head splitter but even the price they go for on eBay is more than I can afford atm, my argument: I shouldn't have to buy extra hardware to get something to work on Linux when it's something that's existed in the windows world for a long time (can you tell I don't get on with X :-p); If I had the cash I'd have bought the latest version of this box already (the new version finally supports large resolutions as the displays I have 1680x1050 each).

Read the article

seaudit report detail

- by user1014130

I've just started using selinux in the last 6 months and am getting to grips with it. However, using sealert on a new CENTOS 6 server, Im not getting the level of detail I was with CENTOS 5. To illustrate: Running sealert -a /var/log/audit/audit.log On CENTOS 5 I get: Summary: SELinux is preventing postdrop (postfix_postdrop_t) "getattr" to /var/log/httpd/error_log (httpd_log_t). Detailed Description: SELinux denied access requested by postdrop. It is not expected that this access is required by postdrop and this access may signal an intrusion attempt. It is also possible that the specific version or configuration of the application is causing it to require additional access. Allowing Access: Sometimes labeling problems can cause SELinux denials. You could try to restore the default system file context for /var/log/httpd/error_log, restorecon -v '/var/log/httpd/error_log' If this does not work, there is currently no automatic way to allow this access. Instead, you can generate a local policy module to allow this access - see FAQ (http://fedora.redhat.com/docs/selinux-faq-fc5/#id2961385) Or you can disable SELinux protection altogether. Disabling SELinux protection is not recommended. Please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi) against this package. Additional Information: Source Context root:system_r:postfix_postdrop_t Target Context system_u:object_r:httpd_log_t Target Objects /var/log/httpd/error_log [ file ] Source postdrop Source Path /usr/sbin/postdrop Port Host Source RPM Packages postfix-2.3.3-2.1.el5_2 Target RPM Packages Policy RPM selinux-policy-2.4.6-279.el5_5.1 Selinux Enabled True Policy Type targeted MLS Enabled True Enforcing Mode Enforcing Plugin Name catchall_file Host Name server109-228-26-144.live-servers.net Platform Linux server109-228-26-144.live-servers.net 2.6.18-194.8.1.el5 #1 SMP Thu Jul 1 19:04:48 EDT 2010 x86_64 x86_64 Alert Count 1 First Seen Wed Jun 13 11:43:55 2012 Last Seen Wed Jun 13 11:43:55 2012 but on CENTOS 6 I just get: Summary: SELinux is preventing postdrop (postfix_postdrop_t) "getattr" to /var/log/httpd/error_log (httpd_log_t). Detailed Description: SELinux denied access requested by postdrop. It is not expected that this access is required by postdrop and this access may signal an intrusion attempt. It is also possible that the specific version or configuration of the application is causing it to require additional access. Allowing Access: Sometimes labeling problems can cause SELinux denials. You could try to restore the default system file context for /var/log/httpd/error_log, restorecon -v '/var/log/httpd/error_log' If this does not work, there is currently no automatic way to allow this access. Instead, you can generate a local policy module to allow this access - see FAQ (http://fedora.redhat.com/docs/selinux-faq-fc5/#id2961385) Or you can disable SELinux protection altogether. Disabling SELinux protection is not recommended. Please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi) against this package. Im running exactly the same command. Does anyone have any idea why Im not getting the "Additional information" that I do with CENTOS 5? Thanks in advance Dylan

Read the article

How to improve Varnish performance?

- by Darkseal

We're experiencing a strange problem with our current Varnish configuration. 4x Web Servers (IIS 6.5 on Windows 2003 Server, each installed on a Intel(R) Xeon(R) CPU E5450 @ 3.00GHz Quad Core, 4GB RAM) 3x Varnish Servers (varnish-3.0.3 revision 9e6a70f on Ubuntu 12.04.2 LTS - 64 bit/precise, Kernel Linux 3.2.0-29-generic, each installed on a Intel(R) Xeon(R) CPU E5450 @ 3.00GHz Quad Core, 4GB RAM) The Varnish Servers performance are awfully bad in general, to the point that if we shut down one of them the other two are unable to fullfill all the requests and start to skip beats resulting in pending requests, timeouts, 404, etc. What can we do to improve our Varnish performance? Considering that we're getting less than 5k request per seconds during our max peak, we should be able to serve our pages even with a single one of them without any problem. We use a standard, vanilla CFG, as shown by this varnishadm param.show output: acceptor_sleep_decay 0.900000 [] acceptor_sleep_incr 0.001000 [s] acceptor_sleep_max 0.050000 [s] auto_restart on [bool] ban_dups on [bool] ban_lurker_sleep 0.010000 [s] between_bytes_timeout 60.000000 [s] cc_command "exec gcc -std=gnu99 -g -O2 -pthread -fpic -shared - Wl,-x -o %o %s" cli_buffer 8192 [bytes] cli_timeout 20 [seconds] clock_skew 10 [s] connect_timeout 0.700000 [s] critbit_cooloff 180.000000 [s] default_grace 10.000000 [seconds] default_keep 0.000000 [seconds] default_ttl 120.000000 [seconds] diag_bitmap 0x0 [bitmap] esi_syntax 0 [bitmap] expiry_sleep 1.000000 [seconds] fetch_chunksize 128 [kilobytes] fetch_maxchunksize 262144 [kilobytes] first_byte_timeout 60.000000 [s] group varnish (113) gzip_level 6 [] gzip_memlevel 8 [] gzip_stack_buffer 32768 [Bytes] gzip_tmp_space 0 [] gzip_window 15 [] http_gzip_support off [bool] http_max_hdr 64 [header lines] http_range_support on [bool] http_req_hdr_len 8192 [bytes] http_req_size 32768 [bytes] http_resp_hdr_len 8192 [bytes] http_resp_size 32768 [bytes] idle_send_timeout 60 [seconds] listen_address :80 listen_depth 1024 [connections] log_hashstring on [bool] log_local_address off [bool] lru_interval 2 [seconds] max_esi_depth 5 [levels] max_restarts 4 [restarts] nuke_limit 50 [allocations] pcre_match_limit 10000 [] pcre_match_limit_recursion 10000 [] ping_interval 3 [seconds] pipe_timeout 60 [seconds] prefer_ipv6 off [bool] queue_max 100 [%] rush_exponent 3 [requests per request] saintmode_threshold 10 [objects] send_timeout 600 [seconds] sess_timeout 5 [seconds] sess_workspace 16384 [bytes] session_linger 50 [ms] session_max 100000 [sessions] shm_reclen 255 [bytes] shm_workspace 8192 [bytes] shortlived 10.000000 [s] syslog_cli_traffic on [bool] thread_pool_add_delay 2 [milliseconds] thread_pool_add_threshold 2 [requests] thread_pool_fail_delay 200 [milliseconds] thread_pool_max 2000 [threads] thread_pool_min 5 [threads] thread_pool_purge_delay 1000 [milliseconds] thread_pool_stack unlimited [bytes] thread_pool_timeout 300 [seconds] thread_pool_workspace 65536 [bytes] thread_pools 2 [pools] thread_stats_rate 10 [requests] user varnish (106) vcc_err_unref on [bool] vcl_dir /etc/varnish vcl_trace off [bool] vmod_dir /usr/lib/varnish/vmods waiter default (epoll, poll) This is our default.vcl file: LINK sub vcl_recv { # BASIC recv COMMANDS: # # lookup -> search the item in the cache # pass -> always serve a fresh item (no-caching) # pipe -> like pass but ensures a direct-connection with the backend (no-cache AND no-proxy) # Allow the backend to serve up stale content if it is responding slow. # This defines when Varnish should use a stale object if it has one in the cache. set req.grace = 30s; if (client.ip == "127.0.0.1") { # request from NGINX - do not alter X-Forwarded-For set req.http.HTTPS = "on"; } else { # Add an X-Forwarded-For to keep track of original request unset req.http.HTTPS; unset req.http.X-Forwarded-For; set req.http.X-Forwarded-For = client.ip; } set req.backend = www_director; # Strip all cookies to force an anonymous request when the back-end servers are down. if (!req.backend.healthy) { unset req.http.Cookie; } ## HHTP Accept-Encoding if (req.http.Accept-Encoding) { if (req.http.Accept-Encoding ~ "gzip") { set req.http.Accept-Encoding = "gzip"; } else if (req.http.Accept-Encoding ~ "deflate") { set req.http.Accept-Encoding = "deflate"; } else { unset req.http.Accept-Encoding; } } if (req.request != "GET" && req.request != "HEAD" && req.request != "PUT" && req.request != "POST" && req.request != "TRACE" && req.request != "OPTIONS" && req.request != "DELETE") { /* non-RFC2616 or CONNECT */ return (pipe); } if (req.request != "GET" && req.request != "HEAD") { /* only deal with GET and HEAD by default */ return (pass); } if (req.http.Authorization) { return (pass); } if (req.http.HTTPS ~ "on") { return (pass); } ###################################################### # COOKIE HANDLING ###################################################### # METHOD 1: do not remove cookies, but pass the page if they contain TB_NC if (!(req.url ~ "(?i)\.(png|gif|ipeg|jpg|ico|swf|css|js)(\?[a-z0-9]+)?$")) { if (req.http.Cookie && req.http.Cookie ~ "TB_NC") { return (pass); } } return (lookup); } # Code determining what to do when serving items from the IIS Server sub vcl_fetch { unset beresp.http.Server; set beresp.http.Server = "Server-1"; # Allow items to be stale if needed. This is the maximum time Varnish should keep an object. set beresp.grace = 1h; if (req.url ~ "(?i)\.(png|gif|ipeg|jpg|ico|swf|css|js)(\?[a-z0-9]+)?$") { unset beresp.http.set-cookie; } # Default Varnish VCL logic if (!beresp.cacheable || beresp.ttl <= 0s || beresp.http.Set-Cookie || beresp.http.Vary == "*") { set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has specific TB_NC no-caching cookie if (req.http.Cookie && req.http.Cookie ~ "TB_NC") { set beresp.http.X-Cacheable = "NO:Got Cookie"; set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has Cache-Control private else if (beresp.http.Cache-Control ~ "private") { set beresp.http.X-Cacheable = "NO:Cache-Control=private"; set beresp.ttl = 120 s; return(hit_for_pass); } # Not Cacheable if it has Cache-Control no-cache or Pragma no-cache else if (beresp.http.Cache-Control ~ "no-cache" || beresp.http.Pragma ~ "no-cache") { set beresp.http.X-Cacheable = "NO:Cache-Control=no-cache (or pragma no-cache)"; set beresp.ttl = 120 s; return(hit_for_pass); } # If we reach to this point, the object is cacheable. # Cacheable but with not enough ttl: we need to extend the lifetime of the object artificially # NOTE: Varnish default TTL is set in /etc/sysconfig/varnish # and can be checked using the following command: # varnishadm param.show default_ttl else if (beresp.ttl < 1s) { set beresp.ttl = 5s; set beresp.grace = 5s; set beresp.http.X-Cacheable = "YES:FORCED"; } # Cacheable and with valid TTL. else { set beresp.http.X-Cacheable = "YES"; } # DEBUG INFO (Cookies) # set beresp.http.X-Cookie-Debug = "Request cookie: " + req.http.Cookie; return(deliver); } sub vcl_error { set obj.http.Content-Type = "text/html; charset=utf-8"; if (obj.status == 404) { synthetic {"  "}; } else if (obj.status == 500) { synthetic {"  "}; } else if (obj.status == 503) { if (req.restarts < 4) { return(restart); } else { synthetic {"  "}; } } else { synthetic {"  "}; } } sub vcl_deliver { if (obj.hits > 0) { set resp.http.X-Cache = "HIT"; } else { set resp.http.X-Cache = "MISS"; } } Thanks in advance,

Read the article

Why does Excel now give me already existing name range error on Copy Sheet?

- by WilliamKF

I've been working on a Microsoft Excel 2007 spreadsheet for several days. I'm working from a master template like sheet and copying it to a new sheet repeatedly. Up until today, this was happening with no issues. However, in the middle of today this suddenly changed and I do not know why. Now, whenever I try to copy a worksheet I get about ten dialogs, each one with a different name range object (shown below as 'XXXX') and I click yes for each one: A formula or sheet you want to move or copy contains the name 'XXXX', which already exists on the destination worksheet. Do you want to use this version of the name? To use the name as defined in destination sheet, click Yes. To rename the range referred to in the formula or worksheet, click No, and enter a new name in the Name Conflict dialog box. The name range objects refer to cells in the sheet. For example, E6 is called name range PRE on multiple sheets (and has been all along) and some of the formulas refer to PRE instead of $E$6. One of the 'XXXX' above is this PRE. These name ranges should only be resolved within the sheet within which they appear. This was not an issue before despite the same name range existing on multiple sheets before. I want to keep my name ranges. What could have changed in my spreadsheet to cause this change in behavior? I've gone back to prior sheets created this way and now they give the message too when copied. I tried a different computer and a different user and the same behavior is seen everywhere. I can only conclude something in the spreadsheet has changed. What could this be and how can I get back the old behavior whereby I can copy sheets with name ranges and not get any errors? Looking in the Name Manager I see that the name ranges being complained about show twice, once as scope Template and again as scope Workbook. If I delete the scope Template ones the error goes away on copy however, I get a bunch of #REF errors. If I delete the scope Workbook ones, all seems okay and the errors on copy go away too, so perhaps this is the answer, but I'm nervous about what effect this deletion will have and wonder how the Workbook ones came into existence in the first place. Will it be safe to just delete the Workbook name manager scoped entries and how might these have come into existence without my knowing it to begin with?

Read the article

Proper set up shared folders for users

- by user221486

First I would like to say thanks for helping, and I have huge problem with proper set up permission for shared folders. I have Windows 7 x64 ent. - name: backupfb - added to domain with shared folder on drive e: (e:\backup) 50 clients/laptops with TSM Tivoli fastback for workstations who save files on shared folder And I need to configure proper permission for my shared folders that only owner of folder can access to their folders. Folder structure is: e:\backup <- shared as a "backup" folder \\backupfb\backup\ e:\backup\BackupAdmin <-- directory is used by the Tivoli Storage Manager FastBack for Workstations client to download revisions and configurations. Nodes require read-only access to these directories e:\backup\RealTimeBackup <-- enable client accounts to create directories that are only accessible by the account that created them. As a result, the directory that contains data for a node is not created until that node connects to the server. So permission should look like that (take from instructions): Inheritable permissions from object`s parents are DISABLE Permission entries: \\backupfb\backup\BackupAdmin Allow Users Read, Execute This folder, subfolders, and files Traverse Folder / Execute Allow List Folder / Read Data Allow Read Attributes Allow Read Extended Attributes Allow Delete subfolders and files Allow Delete Allow Read Permission’s Allow Allow Administrators Full Control This folder, subfolders, and files Both folders have enabled option "apply these permissions to objects and/or containers within this container only" Here everything works fine \\backupfb\backup\RealTimeBackup <<-- Allow Administrators Full Control This folder, subfolders, and files Allow CREATOR OWNER Full Control This folder, subfolders, and files (from domain) Allow Users Special This folder only Traverse Folder / Execute Allow List Folder / Read Data Allow Read Attributes Allow Read Extended Attributes Allow Create Files / Write Data Allow Create Folders / Append Data Allow Delete subfolders and files Allow Read Permission’s Allow Allow OWNER RIGHTS* Full Control This folder, subfolders, and files Here I have huge problem with CREATOR OWNER Im able to set FULL CONTROL but I can only apply "Subfolders and files only". When I change props. to "This folder, subfolders and files" and save its change to "Subfolders and files only" So I try use icacls to set up permissions @echo off takeown /F E:\backup\ /R /A for /D %%i IN (E:\backup\RealTimeBackup*) DO icacls E:\backup\RealTimeBackup\%%~nxi /grant:r cloud\%%~nxi:F /T /C pause but after that user are able to create just one folder in \backupfb\backup\RealTimeBackup\userfolder but problem is with subfolders In log i have: FBW5022E Unable to access the specified file Explanation: The file specified is unable to be accessed. Possibly spelled incorrectly, or bad path, or permissions. User response: Ensure the user has the proper permissions for the file and directories involved andthat the file and directory exist Any idea ?? pls help ;-) thanks

Read the article

MDI WinForm application and duplicate child form memory leak

- by Steve

This is a WinForm MDI application problem (.net framework 3.0). It will be described in C#. Sorry it is a bit long because I try to make things as clear as possible. I have a MDI application. At some point I find that one MDI child form is never released. There is a menu that creates the MDI child form and show it. When the MDI child form is closed, it is supposed to be destroyed and the memory taken by it should be given back to .net. But to my surprise, this is not true. All the MDI child form instances are kept in memory. This is obviously a "memory leak". Well, it is not a real leak in .net. It is just that I think the closed form should be dead but somehow there is at least one unknown reference from outside world that still connect with the closed form. I read some articles on the Web. Some says that when the MDI child form is closing, I should unwire all the event handlers, otherwise some event handlers may keep my form alive. Some says that DataBindings should be cleaned before the form is closing otherwise the DataBindings will add references to some global Hashtable and thus keep my form alive. My form contains quite a lot things. Many event handlers and many DataBindings and many BindingSources and few suspected controls containing user control and HelpProvider. I create a big method that unwires all the event handlers from all the relevant controls, clear all the DataBindings and DataSources. The HelpProvider and user controls are disposed carefully. At the end, I find that, I don't have to clear DataBindings and DataSources. Event handlers are definitely causing the problem. And MDI form structure also contributes to something. During my experiments, I find that, if you create a MDI child form, even if you close it, there will still be one instance in the memory. The reference is from PropertyStore of the main form. This means, unless the main form is closed (application ends), there will always be one instance of MDI child form in the memory. The good news is that, no matter how many times you open and close the child form, there will be only one instance, not a big "leak". When it comes to event handlers, things become more tricky. I have to address that, all the event handlers on my form are anonymous event handlers. Here is an example code: //On MDI child form's design code... Button btnSave = new Button(); btnSave.Click += new System.EventHandler(btnSave_Click); Where btnSave_Click is also a method in MDI child form. The above is always the case for various controls and various types of event. To me, this is a bi-directional circular reference. btnSave keeps a reference of MDI child form via the event handler. MDI child form keeps a reference of btnSave instance. To me again, such bi-directional circular reference should not cause any problem for .net's garbage collector. This means that I do not have to explicitly unwire the event when the form is being disposed: btnSave.Click -= btnSave_Click; But the truth is not so. For some event handlers, they are safe. Ignoring them do not cause any duplicate instance. For some other event handlers, they will cause one instance remaining in the memory (similar effect as the MDI form structure, but this time caused by the hanging event handlers). For some other event handlers, they will cause every instance opened in the memory. I am totally confused about the differences between these three types of event handlers. The controls are created in the same way and the event is attached in the same way. What is the difference? (Don't tell me it is the event handle methods that make difference.) Anyone has experience of this wired scenario and has an answer for me? Thanks a lot. So now, for safety issue, I will have to unwire all the event handlers when the form is being disposed. That will be a long list of similar code for each control. Is there a general way of removing events from controls in recursive way using reflection? What about performance issue? That's the end of my story and I am still in the middle of my problem. For any help, I thank you.

Read the article

Few Google Checkout Questions

- by Richard Knop

I am planning to integrate a Google Checkout payment system on a social networking website. The idea is that members can buy "tokens" for real money (which are sort of the website currency) and then they can buy access to some extra content on the website etc. What I want to do is create a Google Checkout button that takes a member to the checkout page where he pays with his credit or debit card. What I want is the Google Checkout to notify notify my server whether the purchase of tokens was successful (if the credit/debit card was charged) so I can update the local database. The website is coded in PHP/MySQL. I have downloaded the sample PHP code from here: code.google.com/p/google-checkout-php-sample-code/wiki/Documentation I know how to create a Google checkout button and I have also placed the responsehandlerdemo.php file on my server. This is the file the Google Checkout is supposed to send response to (of course I set the path to the file in Google merchant account). Now in the response handler file there is a switch block with several case statements. Which one means that the payment was successful and I can add tokens to the member account in the local database? switch ($root) { case "request-received": { break; } case "error": { break; } case "diagnosis": { break; } case "checkout-redirect": { break; } case "merchant-calculation-callback": { // Create the results and send it $merchant_calc = new GoogleMerchantCalculations($currency); // Loop through the list of address ids from the callback $addresses = get_arr_result($data[$root]['calculate']['addresses']['anonymous-address']); foreach($addresses as $curr_address) { $curr_id = $curr_address['id']; $country = $curr_address['country-code']['VALUE']; $city = $curr_address['city']['VALUE']; $region = $curr_address['region']['VALUE']; $postal_code = $curr_address['postal-code']['VALUE']; // Loop through each shipping method if merchant-calculated shipping // support is to be provided if(isset($data[$root]['calculate']['shipping'])) { $shipping = get_arr_result($data[$root]['calculate']['shipping']['method']); foreach($shipping as $curr_ship) { $name = $curr_ship['name']; //Compute the price for this shipping method and address id $price = 12; // Modify this to get the actual price $shippable = "true"; // Modify this as required $merchant_result = new GoogleResult($curr_id); $merchant_result->SetShippingDetails($name, $price, $shippable); if($data[$root]['calculate']['tax']['VALUE'] == "true") { //Compute tax for this address id and shipping type $amount = 15; // Modify this to the actual tax value $merchant_result->SetTaxDetails($amount); } if(isset($data[$root]['calculate']['merchant-code-strings'] ['merchant-code-string'])) { $codes = get_arr_result($data[$root]['calculate']['merchant-code-strings'] ['merchant-code-string']); foreach($codes as $curr_code) { //Update this data as required to set whether the coupon is valid, the code and the amount $coupons = new GoogleCoupons("true", $curr_code['code'], 5, "test2"); $merchant_result->AddCoupons($coupons); } } $merchant_calc->AddResult($merchant_result); } } else { $merchant_result = new GoogleResult($curr_id); if($data[$root]['calculate']['tax']['VALUE'] == "true") { //Compute tax for this address id and shipping type $amount = 15; // Modify this to the actual tax value $merchant_result->SetTaxDetails($amount); } $codes = get_arr_result($data[$root]['calculate']['merchant-code-strings'] ['merchant-code-string']); foreach($codes as $curr_code) { //Update this data as required to set whether the coupon is valid, the code and the amount $coupons = new GoogleCoupons("true", $curr_code['code'], 5, "test2"); $merchant_result->AddCoupons($coupons); } $merchant_calc->AddResult($merchant_result); } } $Gresponse->ProcessMerchantCalculations($merchant_calc); break; } case "new-order-notification": { $Gresponse->SendAck(); break; } case "order-state-change-notification": { $Gresponse->SendAck(); $new_financial_state = $data[$root]['new-financial-order-state']['VALUE']; $new_fulfillment_order = $data[$root]['new-fulfillment-order-state']['VALUE']; switch($new_financial_state) { case 'REVIEWING': { break; } case 'CHARGEABLE': { //$Grequest->SendProcessOrder($data[$root]['google-order-number']['VALUE']); //$Grequest->SendChargeOrder($data[$root]['google-order-number']['VALUE'],''); break; } case 'CHARGING': { break; } case 'CHARGED': { break; } case 'PAYMENT_DECLINED': { break; } case 'CANCELLED': { break; } case 'CANCELLED_BY_GOOGLE': { //$Grequest->SendBuyerMessage($data[$root]['google-order-number']['VALUE'], // "Sorry, your order is cancelled by Google", true); break; } default: break; } switch($new_fulfillment_order) { case 'NEW': { break; } case 'PROCESSING': { break; } case 'DELIVERED': { break; } case 'WILL_NOT_DELIVER': { break; } default: break; } break; } case "charge-amount-notification": { //$Grequest->SendDeliverOrder($data[$root]['google-order-number']['VALUE'], // <carrier>, <tracking-number>, <send-email>); //$Grequest->SendArchiveOrder($data[$root]['google-order-number']['VALUE'] ); $Gresponse->SendAck(); break; } case "chargeback-amount-notification": { $Gresponse->SendAck(); break; } case "refund-amount-notification": { $Gresponse->SendAck(); break; } case "risk-information-notification": { $Gresponse->SendAck(); break; } default: $Gresponse->SendBadRequestStatus("Invalid or not supported Message"); break; } I guess that case 'CHARGED' is the one, am I right? Second question, do I need an SSL certificate to receive response from Google Checkout? According to this I do: groups.google.com/group/google-checkout-api-php/browse_thread/thread/10ce55177281c2b0 But I don's see it mentioned anywhere in the official documentation. Thank you.

Read the article

Mutating the expression tree of a predicate to target another type

- by Jon

Intro In the application I 'm currently working on, there are two kinds of each business object: the "ActiveRecord" type, and the "DataContract" type. So for example, we have: namespace ActiveRecord { class Widget { public int Id { get; set; } } } namespace DataContracts { class Widget { public int Id { get; set; } } } The database access layer takes care of "translating" between hierarchies: you can tell it to update a DataContracts.Widget, and it will magically create an ActiveRecord.Widget with the same property values and save that. The problem I have surfaced when attempting to refactor this database access layer. The Problem I want to add methods like the following to the database access layer: // Widget is DataContract.Widget interface DbAccessLayer { IEnumerable<Widget> GetMany(Expression<Func<Widget, bool>> predicate); } The above is a simple general-use "get" method with custom predicate. The only point of interest is that I 'm not passing in an anonymous function but rather an expression tree. This is done because inside DbAccessLayer we have to query ActiveRecord.Widget efficiently (LINQ to SQL) and not have the database return all ActiveRecord.Widget instances and then filter the enumerable collection. We need to pass in an expression tree, so we ask for one as the parameter for GetMany. The snag: the parameter we have needs to be magically transformed from an Expression<Func<DataContract.Widget, bool>> to an Expression<Func<ActiveRecord.Widget, bool>>. This is where I haven't managed to pull it off... Attempted Solution What we 'd like to do inside GetMany is: IEnumerable<DataContract.Widget> GetMany( Expression<Func<DataContract.Widget, bool>> predicate) { var lambda = Expression.Lambda<Func<ActiveRecord.Widget, bool>>( predicate.Body, predicate.Parameters); // use lambda to query ActiveRecord.Widget and return some value } This won't work because in a typical scenario, for example if: predicate == w => w.Id == 0; ...the expression tree contains a MemberAccessExpression instance which has a MemberInfo property (named Member) that point to members of DataContract.Widget. There are also ParameterExpression instances both in the expression tree and in its parameter expression collection (predicate.Parameters); After searching a bit, I found System.Linq.Expressions.ExpressionVisitor (its source can be found here in the context of a how-to, very helpful) which is a convenient way to modify an expression tree. Armed with this, I implemented a visitor. This simple visitor only takes care of changing the types in member access and parameter expressions. It may not be complete, but it's fine for the expression w => w.Id == 0. internal class Visitor : ExpressionVisitor { private readonly Func<Type, Type> dataContractToActiveRecordTypeConverter; public Visitor(Func<Type, Type> dataContractToActiveRecordTypeConverter) { this.dataContractToActiveRecordTypeConverter = dataContractToActiveRecordTypeConverter; } protected override Expression VisitMember(MemberExpression node) { var dataContractType = node.Member.ReflectedType; var activeRecordType = this.dataContractToActiveRecordTypeConverter(dataContractType); var converted = Expression.MakeMemberAccess( base.Visit(node.Expression), activeRecordType.GetProperty(node.Member.Name)); return converted; } protected override Expression VisitParameter(ParameterExpression node) { var dataContractType = node.Type; var activeRecordType = this.dataContractToActiveRecordTypeConverter(dataContractType); return Expression.Parameter(activeRecordType, node.Name); } } With this visitor, GetMany becomes: IEnumerable<DataContract.Widget> GetMany( Expression<Func<DataContract.Widget, bool>> predicate) { var visitor = new Visitor(...); var lambda = Expression.Lambda<Func<ActiveRecord.Widget, bool>>( visitor.Visit(predicate.Body), predicate.Parameters.Select(p => visitor.Visit(p)); var widgets = ActiveRecord.Widget.Repository().Where(lambda); // This is just for reference, see below Expression<Func<ActiveRecord.Widget, bool>> referenceLambda = w => w.Id == 0; // Here we 'd convert the widgets to instances of DataContract.Widget and // return them -- this has nothing to do with the question though. } Results The good news is that lambda is constructed just fine. The bad news is that it isn't working; it's blowing up on me when I try to use it (the exception messages are really not helpful at all). I have examined the lambda my code produces and a hardcoded lambda with the same expression; they look exactly the same. I spent hours in the debugger trying to find some difference, but I can't. When predicate is w => w.Id == 0, lambda looks exactly like referenceLambda. But the latter works with e.g. IQueryable<T>.Where, while the former does not (I have tried this in the immediate window of the debugger). I should also mention that when predicate is w => true, it all works just fine. Therefore I am assuming that I 'm not doing enough work in Visitor, but I can't find any more leads to follow on. Can someone point me in the right direction? Thanks in advance for your help!

Read the article

What does Ruby have that Python doesn't, and vice versa?

- by Lennart Regebro

There is a lot of discussions of Python vs Ruby, and I all find them completely unhelpful, because they all turn around why feature X sucks in language Y, or that claim language Y doesn't have X, although in fact it does. I also know exactly why I prefer Python, but that's also subjective, and wouldn't help anybody choosing, as they might not have the same tastes in development as I do. It would therefore be interesting to list the differences, objectively. So no "Python's lambdas sucks". Instead explain what Ruby's lambdas can do that Python's can't. No subjectivity. Example code is good! Don't have several differences in one answer, please. And vote up the ones you know are correct, and down those you know are incorrect (or are subjective). Also, differences in syntax is not interesting. We know Python does with indentation what Ruby does with brackets and ends, and that @ is called self in Python. UPDATE: This is now a community wiki, so we can add the big differences here. Ruby has a class reference in the class body In Ruby you have a reference to the class (self) already in the class body. In Python you don't have a reference to the class until after the class construction is finished. An example: class Kaka puts self end self in this case is the class, and this code would print out "Kaka". There is no way to print out the class name or in other ways access the class from the class definition body in Python. All classes are mutable in Ruby This lets you develop extensions to core classes. Here's an example of a rails extension: class String def starts_with?(other) head = self[0, other.length] head == other end end Ruby has Perl-like scripting features Ruby has first class regexps, $-variables, the awk/perl line by line input loop and other features that make it more suited to writing small shell scripts that munge text files or act as glue code for other programs. Ruby has first class continuations Thanks to the callcc statement. In Python you can create continuations by various techniques, but there is no support built in to the language. Ruby has blocks With the "do" statement you can create a multi-line anonymous function in Ruby, which will be passed in as an argument into the method in front of do, and called from there. In Python you would instead do this either by passing a method or with generators. Ruby: amethod { |here| many=lines+of+code goes(here) } Python: def function(here): many=lines+of+code goes(here) amethod(function) Interestingly, the convenience statement in Ruby for calling a block is called "yield", which in Python will create a generator. Ruby: def themethod yield 5 end themethod do |foo| puts foo end Python: def themethod(): yield 5 for foo in themethod: print foo Although the principles are different, the result is strikingly similar. Python has built-in generators (which are used like Ruby blocks, as noted above) Python has support for generators in the language. In Ruby you could use the generator module that uses continuations to create a generator from a block. Or, you could just use a block/proc/lambda! Moreover, in Ruby 1.9 Fibers are, and can be used as, generators. docs.python.org has this generator example: def reverse(data): for index in range(len(data)-1, -1, -1): yield data[index] Contrast this with the above block examples. Python has flexible name space handling In Ruby, when you import a file with require, all the things defined in that file will end up in your global namespace. This causes namespace pollution. The solution to that is Rubys modules. But if you create a namespace with a module, then you have to use that namespace to access the contained classes. In Python, the file is a module, and you can import its contained names with from themodule import *, thereby polluting the namespace if you want. But you can also import just selected names with from themodule import aname, another or you can simply import themodule and then access the names with themodule.aname. If you want more levels in your namespace you can have packages, which are directories with modules and an __init__.py file. Python has docstrings Docstrings are strings that are attached to modules, functions and methods and can be introspected at runtime. This helps for creating such things as the help command and automatic documentation. def frobnicate(bar): """frobnicate takes a bar and frobnicates it >>> bar = Bar() >>> bar.is_frobnicated() False >>> frobnicate(bar) >>> bar.is_frobnicated() True """ Python has more libraries Python has a vast amount of available modules and bindings for libraries. Python has multiple inheritance Ruby does not ("on purpose" -- see Ruby's website, see here how it's done in Ruby). It does reuse the module concept as a sort of abstract classes. Python has list/dict comprehensions Python: res = [x*x for x in range(1, 10)] Ruby: res = (0..9).map { |x| x * x } Python: >>> (x*x for x in range(10)) <generator object <genexpr> at 0xb7c1ccd4> >>> list(_) [0, 1, 4, 9, 16, 25, 36, 49, 64, 81] Ruby: p = proc { |x| x * x } (0..9).map(&p) Python: >>> {x:str(y*y) for x,y in {1:2, 3:4}.items()} {1: '4', 3: '16'} Ruby: >> Hash[{1=>2, 3=>4}.map{|x,y| [x,(y*y).to_s]}] => {1=>"4", 3=>"16"} Python has decorators Things similar to decorators can be created in Ruby, and it can also be argued that they aren't as necessary as in Python.

Read the article

Passing a comparator syntax help in Java

- by Crystal

I've tried this a couple ways, the first is have a class that implements comparator at the bottom of the following code. When I try to pass the comparat in sortListByLastName, I get a constructor not found error and I am not sure why import java.util.*; public class OrganizeThis implements WhoDoneIt { /** Add a person to the organizer @param p A person object */ public void add(Person p) { staff.put(p.getEmail(), p); //System.out.println("Person " + p + "added"); } /** * Remove a Person from the organizer. * * @param email The email of the person to be removed. */ public void remove(String email) { staff.remove(email); } /** * Remove all contacts from the organizer. * */ public void empty() { staff.clear(); } /** * Find the person stored in the organizer with the email address. * Note, each person will have a unique email address. * * @param email The person email address you are looking for. * */ public Person findByEmail(String email) { Person aPerson = staff.get(email); return aPerson; } /** * Find all persons stored in the organizer with the same last name. * Note, there can be multiple persons with the same last name. * * @param lastName The last name of the persons your are looking for. * */ public Person[] find(String lastName) { ArrayList<Person> names = new ArrayList<Person>(); for (Person s : staff.values()) { if (s.getLastName() == lastName) { names.add(s); } } // Convert ArrayList back to Array Person nameArray[] = new Person[names.size()]; names.toArray(nameArray); return nameArray; } /** * Return all the contact from the orgnizer in * an array sorted by last name. * * @return An array of Person objects. * */ public Person[] getSortedListByLastName() { PersonLastNameComparator comp = new PersonLastNameComparator(); Map<String, Person> sorted = new TreeMap<String, Person>(comp); ArrayList<Person> sortedArrayList = new ArrayList<Person>(); for (Person s: sorted.values()) { sortedArrayList.add(s); } Person sortedArray[] = new Person[sortedArrayList.size()]; sortedArrayList.toArray(sortedArray); return sortedArray; } private Map<String, Person> staff = new HashMap<String, Person>(); public static void main(String[] args) { OrganizeThis testObj = new OrganizeThis(); Person person1 = new Person("J", "W", "111-222-3333", "[email protected]"); Person person2 = new Person("K", "W", "345-678-9999", "[email protected]"); Person person3 = new Person("Phoebe", "Wang", "322-111-3333", "[email protected]"); Person person4 = new Person("Nermal", "Johnson", "322-342-5555", "[email protected]"); Person person5 = new Person("Apple", "Banana", "123-456-1111", "[email protected]"); testObj.add(person1); testObj.add(person2); testObj.add(person3); testObj.add(person4); testObj.add(person5); System.out.println(testObj.findByEmail("[email protected]")); System.out.println("------------" + '\n'); Person a[] = testObj.find("W"); for (Person p : a) System.out.println(p); System.out.println("------------" + '\n'); a = testObj.find("W"); for (Person p : a) System.out.println(p); System.out.println("SORTED" + '\n'); a = testObj.getSortedListByLastName(); for (Person b : a) { System.out.println(b); } System.out.println(testObj.getAuthor()); } } class PersonLastNameComparator implements Comparator<Person> { public int compare(Person a, Person b) { return a.getLastName().compareTo(b.getLastName()); } } And then when I tried doing it by creating an anonymous inner class, I also get a constructor TreeMap cannot find symbol error. Any thoughts? inner class method: public Person[] getSortedListByLastName() { //PersonLastNameComparator comp = new PersonLastNameComparator(); Map<String, Person> sorted = new TreeMap<String, Person>(new Comparator<Person>() { public int compare(Person a, Person b) { return a.getLastName().compareTo(b.getLastName()); } }); ArrayList<Person> sortedArrayList = new ArrayList<Person>(); for (Person s: sorted.values()) { sortedArrayList.add(s); } Person sortedArray[] = new Person[sortedArrayList.size()]; sortedArrayList.toArray(sortedArray); return sortedArray; }

Read the article

Ldap invalid credentials not loading authentication failure url

- by Murari

Able to do the custom ldap authentication for external db authorities. But when i am trying to test wrong password the authentication failure url is not showing instead my browser prints the exception details.Below is my securitycontext.xml and exption given <http auto-config="false" access-decision-manager-ref="accessDecisionManager" access-denied-page="/accessDenied.jsp">  <intercept-url pattern="/index.jsp" filters="none" />  <intercept-url pattern="/**" access="IS_AUTHENTICATED_ANONYMOUSLY" /> <intercept-url pattern="/service/**" access="PRIV_Report User, PRIV_305" /> <logout logout-success-url="/index.jsp" /> <form-login authentication-failure-url="/index.jsp?error=1" default-target-url="/home.jsp" /> <anonymous/> </http> <b:bean id="accessDecisionManager" class="org.springframework.security.vote.AffirmativeBased"> <b:property name="decisionVoters"> <b:list> <b:ref bean="roleVoter" /> <b:ref bean="authenticatedVoter" /> </b:list> </b:property> </b:bean> <b:bean id="roleVoter" class="org.springframework.security.vote.RoleVoter"> <b:property name="rolePrefix" value="PRIV_" /> </b:bean> <b:bean id="authenticatedVoter" class="org.springframework.security.vote.AuthenticatedVoter"> </b:bean> <b:bean id="contextSource" class="org.springframework.security.ldap.DefaultSpringSecurityContextSource"> <b:constructor-arg value="ldap://mydomain:389" /> </b:bean> <b:bean id="ldapTemplate" class="org.springframework.ldap.core.LdapTemplate"> <b:constructor-arg ref="contextSource" /> </b:bean> <b:bean id="ldapAuthenticationProvider" class="com.zo.sas.gwt.security.login.server.SASLdapAuthenticationProvider"> <b:property name="authenticator" ref="ldapAuthenticator" /> <custom-authentication-provider /> </b:bean> <b:bean id="ldapAuthenticator" class="com.zo.sas.gwt.security.login.server.SASAuthenticator"> <b:property name="contextSource" ref="contextSource" /> <b:property name="userDnPatterns"> <b:value>uid={0},OU=People</b:value> </b:property> </b:bean> and my exception logs..... org.springframework.ldap.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]; nested exception is javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials] org.springframework.ldap.support.LdapUtils.convertLdapException(LdapUtils.java:180) org.springframework.ldap.core.support.AbstractContextSource.createContext(AbstractContextSource.java:266) org.springframework.ldap.core.support.AbstractContextSource.getContext(AbstractContextSource.java:106) com.zo.sas.gwt.security.login.server.SASAuthenticator.authenticate(SASAuthenticator.java:55) com.zo.sas.gwt.security.login.server.SASLdapAuthenticationProvider.authenticate(SASLdapAuthenticationProvider.java:45) org.springframework.security.providers.ProviderManager.doAuthentication(ProviderManager.java:188) org.springframework.security.AbstractAuthenticationManager.authenticate(AbstractAuthenticationManager.java:46) org.springframework.security.ui.webapp.AuthenticationProcessingFilter.attemptAuthentication(AuthenticationProcessingFilter.java:82) org.springframework.security.ui.AbstractProcessingFilter.doFilterHttp(AbstractProcessingFilter.java:258) org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53) org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390) org.springframework.security.ui.logout.LogoutFilter.doFilterHttp(LogoutFilter.java:89) org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53) org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390) org.springframework.security.context.HttpSessionContextIntegrationFilter.doFilterHttp(HttpSessionContextIntegrationFilter.java:235) org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53) org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390) org.springframework.security.util.FilterChainProxy.doFilter(FilterChainProxy.java:175) org.springframework.web.filter.DelegatingFilterProxy.invokeDelegate(DelegatingFilterProxy.java:183) org.springframework.web.filter.DelegatingFilterProxy.doFilter(DelegatingFilterProxy.java:138) This is my index.jsp <html> <script type="text/javascript" language="javascript"> var dictionary = { loginErr: "${SPRING_SECURITY_LAST_EXCEPTION.message}", error: "${param.error}" }; </script> <head> </head> <body > <iframe src="javascript:''" id="__gwt_historyFrame" style="width:0;height:0;border:0"></iframe> <script type="text/javascript" language="javascript" src="com.zo.sas.gwt.sasworkflow.home.Home.nocache.js"></script> </body> </html>

Read the article

How to? WCF customBinding over Https

- by user663414

Hi all, I'm trying to setup a WCF service for internal use, on our external facing web-farm (we dont have a web farm internally, and I need this service to have failover and load-balancing). Requirements: PerSession state, as we need the service to retain variable data for each session. HTTPS. After lots of googling i've read I needed to create a customBinding, which I've done, but not sure if it is correct. Larger message size, as one of the parameters is a byte[] array, which can be a max of 5mb. no requirement to manually edit the client-side app.config. ie, I need the Developer to just add the service reference, and then starts using the object without fiddly changing of app.config. Note: I've previously had this service working under HTTP correctly (using wsHttpBinding). I've also had it working under HTTPS, but it didn't support PerSession state, and lost internal variable values each function call. I'm currently getting this error from the test harness: Could not find default endpoint element that references contract 'AppMonitor.IAppMonitorWcfService' in the ServiceModel client configuration section. This might be because no configuration file was found for your application, or because no endpoint element matching this contract could be found in the client element. NOTE: The error is arising on an Test Harness EXE, that has the WCF service referenced directly under Service References. This is not the problem of an exe referencing another object, that then references the WCF service, that i've read about. The WSDL is showing correctly when browsing to the URL. Web.Config: <system.serviceModel> <services> <service name="AppMonitor.AppMonitorWcfService" behaviorConfiguration="ServiceBehavior"> <endpoint address="" binding="customBinding" bindingConfiguration="EnablePerSessionUnderHttps" contract="AppMonitor.IAppMonitorWcfService"/> <endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange" /> </service> </services> <bindings> <customBinding> <binding name="EnablePerSessionUnderHttps" maxReceivedMessageSize="5242880"> <reliableSession ordered="true"/> <textMessageEncoding> <readerQuotas maxDepth="64" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> </textMessageEncoding> <httpsTransport authenticationScheme="Anonymous" requireClientCertificate="false"/> </binding> </customBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="ServiceBehavior"> <serviceMetadata httpsGetEnabled="true" httpGetEnabled="false"/> <serviceDebug includeExceptionDetailInFaults="true"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> EXE's App.config (auto-generated when adding the Service Reference): <configuration> <system.serviceModel> <bindings> <wsHttpBinding> <binding name="CustomBinding_IAppMonitorWcfService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="true" /> <security mode="Transport"> <transport clientCredentialType="None" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" establishSecurityContext="true" /> </security> </binding> </wsHttpBinding> </bindings> <client /> </system.serviceModel> </configuration> I'm not sure why the app.config is showing wsHttpBinding? Shouldn't this be customBinding? I really dont want to have to edit the app.config, as this service will be used by dozens of developers, and I want them to just be able to add the Service Reference, and away they go... Using VS2008, .NET 3.51. I think server is IIS7, Win Server 2008, can confirm if needed.

Read the article

May 20th Links: ASP.NET MVC, ASP.NET, .NET 4, VS 2010, Silverlight

- by ScottGu

Here is the latest in my link-listing series. Also check out my VS 2010 and .NET 4 series and ASP.NET MVC 2 series for other on-going blog series I’m working on. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET MVC How to Localize an ASP.NET MVC Application: Michael Ceranski has a good blog post that describes how to localize ASP.NET MVC 2 applications. ASP.NET MVC with jTemplates Part 1 and Part 2: Steve Gentile has a nice two-part set of blog posts that demonstrate how to use the jTemplate and DataTable jQuery libraries to implement client-side data binding with ASP.NET MVC. CascadingDropDown jQuery Plugin for ASP.NET MVC: Raj Kaimal has a nice blog post that demonstrates how to implement a dynamically constructed cascading dropdownlist on the client using jQuery and ASP.NET MVC. How to Configure VS 2010 Code Coverage for ASP.NET MVC Unit Tests: Visual Studio enables you to calculate the “code coverage” of your unit tests. This measures the percentage of code within your application that is exercised by your tests – and can give you a sense of how much test coverage you have. Gunnar Peipman demonstrates how to configure this for ASP.NET MVC projects. Shrinkr URL Shortening Service Sample: A nice open source application and code sample built by Kazi Manzur that demonstrates how to implement a URL Shortening Services (like bit.ly) using ASP.NET MVC 2 and EF4. More details here. Creating RSS Feeds in ASP.NET MVC: Damien Guard has a nice post that describes a cool new “FeedResult” class he created that makes it easy to publish and expose RSS feeds from within ASP.NET MVC sites. NoSQL with MongoDB, NoRM and ASP.NET MVC Part 1 and Part 2: Nice two-part blog series by Shiju Varghese on how to use MongoDB (a document database) with ASP.NET MVC. If you are interested in document databases also make sure to check out the Raven DB project from Ayende. Using the FCKEditor with ASP.NET MVC: Quick blog post that describes how to use FCKEditor – an open source HTML Text Editor – with ASP.NET MVC. ASP.NET Replace Html.Encode Calls with the New HTML Encoding Syntax: Phil Haack has a good blog post that describes a useful way to quickly update your ASP.NET pages and ASP.NET MVC views to use the new <%: %> encoding syntax in ASP.NET 4. I blogged about the new <%: %> syntax – it provides an easy and concise way to HTML encode content. Integrating Twitter into an ASP.NET Website using OAuth: Scott Mitchell has a nice article that describes how to take advantage of Twiter within an ASP.NET Website using the OAuth protocol – which is a simple, secure protocol for granting API access. Creating an ASP.NET report using VS 2010 Part 1, Part 2, and Part 3: Raj Kaimal has a nice three part set of blog posts that detail how to use SQL Server Reporting Services, ASP.NET 4 and VS 2010 to create a dynamic reporting solution. Three Hidden Extensibility Gems in ASP.NET 4: Phil Haack blogs about three obscure but useful extensibility points enabled with ASP.NET 4. .NET 4 Entity Framework 4 Video Series: Julie Lerman has a nice, free, 7-part video series on MSDN that walks through how to use the new EF4 capabilities with VS 2010 and .NET 4. I’ll be covering EF4 in a blog series that I’m going to start shortly as well. Getting Lazy with System.Lazy: System.Lazy and System.Lazy<T> are new features in .NET 4 that provide a way to create objects that may need to perform time consuming operations and defer the execution of the operation until it is needed. Derik Whittaker has a nice write-up that describes how to use it. LINQ to Twitter: Nifty open source library on Codeplex that enables you to use LINQ syntax to query Twitter. Visual Studio 2010 Using Intellitrace in VS 2010: Chris Koenig has a nice 10 minute video that demonstrates how to use the new Intellitrace features of VS 2010 to enable DVR playback of your debug sessions. Make the VS 2010 IDE Colors look like VS 2008: Scott Hanselman has a nice blog post that covers the Visual Studio Color Theme Editor extension – which allows you to customize the VS 2010 IDE however you want. How to understand your code using Dependency Graphs, Sequence Diagrams, and the Architecture Explorer: Jennifer Marsman has a nice blog post describes how to take advantage of some of the new architecture features within VS 2010 to quickly analyze applications and legacy code-bases. How to maintain control of your code using Layer Diagrams: Another great blog post by Jennifer Marsman that demonstrates how to setup a “layer diagram” within VS 2010 to enforce clean layering within your applications. This enables you to enforce a compiler error if someone inadvertently violates a layer design rule. Collapse Selection in Solution Explorer Extension: Useful VS 2010 extension that enables you to quickly collapse “child nodes” within the Visual Studio Solution Explorer. If you have deeply nested project structures this extension is useful. Silverlight and Windows Phone 7 Building a Simple Windows Phone 7 Application: A nice tutorial blog post that demonstrates how to take advantage of Expression Blend to create an animated Windows Phone 7 application. If you haven’t checked out my Windows Phone 7 Twitter Tutorial I also recommend reading that. Hope this helps, Scott P.S. If you haven’t already, check out this month’s "Find a Hoster” page on the www.asp.net website to learn about great (and very inexpensive) ASP.NET hosting offers.

Read the article

MEF CompositionInitializer for WPF

- by Reed

The Managed Extensibility Framework is an amazingly useful addition to the .NET Framework. I was very excited to see System.ComponentModel.Composition added to the core framework. Personally, I feel that MEF is one tool I’ve always been missing in my .NET development. Unfortunately, one perfect scenario for MEF tends to fall short of it’s full potential is in Windows Presentation Foundation development. In particular, there are many times when the XAML parser constructs objects in WPF development, which makes composition of those parts difficult. The current release of MEF (Preview Release 9) addresses this for Silverlight developers via System.ComponentModel.Composition.CompositionInitializer. However, there is no equivalent class for WPF developers. The CompositionInitializer class provides the means for an object to compose itself. This is very useful with WPF and Silverlight development, since it allows a View, such as a UserControl, to be generated via the standard XAML parser, and still automatically pull in the appropriate ViewModel in an extensible manner. Glenn Block has demonstrated the usage for Silverlight in detail, but the same issues apply in WPF. As an example, let’s take a look at a very simple case. Take the following XAML for a Window: <Window x:Class="WpfApplication1.MainView" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="MainWindow" Height="220" Width="300"> <Grid> <TextBlock Text="{Binding TheText}" /> </Grid> </Window> This does nothing but create a Window, add a simple TextBlock control, and use it to display the value of our “TheText” property in our DataContext class. Since this is our main window, WPF will automatically construct and display this Window, so we need to handle constructing the DataContext and setting it ourselves. We could do this in code or in XAML, but in order to do it directly, we would need to hard code the ViewModel type directly into our XAML code, or we would need to construct the ViewModel class and set it in the code behind. Both have disadvantages, and the disadvantages grow if we’re using MEF to compose our ViewModel. Ideally, we’d like to be able to have MEF construct our ViewModel for us. This way, it can provide any construction requirements for our ViewModel via [ImportingConstructor], and it can handle fully composing the imported properties on our ViewModel. CompositionInitializer allows this to occur. We use CompositionInitializer within our View’s constructor, and use it for self-composition of our View. Using CompositionInitializer, we can modify our code behind to: public partial class MainView : Window { public MainView() { InitializeComponent(); CompositionInitializer.SatisfyImports(this); } [Import("MainViewModel")] public object ViewModel { get { return this.DataContext; } set { this.DataContext = value; } } } We then can add an Export on our ViewModel class like so: [Export("MainViewModel")] public class MainViewModel { public string TheText { get { return "Hello World!"; } } } MEF will automatically compose our application, decoupling our ViewModel injection to the DataContext of our View until runtime. When we run this, we’ll see: There are many other approaches for using MEF to wire up the extensible parts within your application, of course. However, any time an object is going to be constructed by code outside of your control, CompositionInitializer allows us to continue to use MEF to satisfy the import requirements of that object. In order to use this from WPF, I’ve ported the code from MEF Preview 9 and Glenn Block’s (now obsolete) PartInitializer port to Windows Presentation Foundation. There are some subtle changes from the Silverlight port, mainly to handle running in a desktop application context. The default behavior of my port is to construct an AggregateCatalog containing a DirectoryCatalog set to the location of the entry assembly of the application. In addition, if an “Extensions” folder exists under the entry assembly’s directory, a second DirectoryCatalog for that folder will be included. This behavior can be overridden by specifying a CompositionContainer or one or more ComposablePartCatalogs to the System.ComponentModel.Composition.Hosting.CompositionHost static class prior to the first use of CompositionInitializer. Please download CompositionInitializer and CompositionHost for VS 2010 RC, and contact me with any feedback. Composition.Initialization.Desktop.zip Edit on 3/29: Glenn Block has since updated his version of CompositionInitializer (and ExportFactory<T>!), and made it available here: http://cid-f8b2fd72406fb218.skydrive.live.com/self.aspx/blog/Composition.Initialization.Desktop.zip This is a .NET 3.5 solution, and should soon be pushed to CodePlex, and made available on the main MEF site.

Read the article

Blending the Sketchflow Action

- by GeekAgilistMercenary

Started a new Sketchflow Prototype in Expression Blend recently and documented each of the steps. This blog entry covers some of those steps, which are the basic elements of any prototype. I will have more information regarding design, prototype creation, and the process of the initial phases for development in the future. For now, I hope you enjoy this short walk through. Also, be sure to check out my last quick entry on Sketchflow. I started off with a Sketchflow Project, just like I did in my previous entry (more specifics in that entry about how to manipulate and build out the Sketchflow Map). Once I created the project I setup the following Sketchflow Map. The CoreNavigation is a ComponentScreen setup solely for the page navigation at the top of the screen. The XAML markup in case you want to create a Component Screen with the same design is included below. <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity" xmlns:pb="clr-namespace:Microsoft.Expression.Prototyping.Behavior;assembly=Microsoft.Expression.Prototyping.Interactivity" x:Class="RapidPrototypeSketchScreens.CoreNavigation" d:DesignWidth="624" d:DesignHeight="49" Height="49" Width="624"> <Grid x:Name="LayoutRoot"> <TextBlock HorizontalAlignment="Stretch" Margin="307,3,0,0" Style="{StaticResource TitleCenter-Sketch}" Text="Aütøchart Scorecards" TextWrapping="Wrap"> <i:Interaction.Triggers> <i:EventTrigger EventName="MouseLeftButtonDown"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1"/> </i:EventTrigger> </i:Interaction.Triggers> </TextBlock> <Button HorizontalAlignment="Left" Margin="164,8,0,11" Style="{StaticResource Button-Sketch}" Width="144" Content="Scorecard"> <i:Interaction.Triggers> <i:EventTrigger EventName="Click"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1_2"/> </i:EventTrigger> </i:Interaction.Triggers> </Button> <Button HorizontalAlignment="Left" Margin="8,8,0,11" Style="{StaticResource Button-Sketch}" Width="152" Content="Standard Reports"> <i:Interaction.Triggers> <i:EventTrigger EventName="Click"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1_1"/> </i:EventTrigger> </i:Interaction.Triggers> </Button> </Grid> </UserControl> Now that the CoreNavigation Component Screen is done I built out each of the others. In each of those screens I included the CoreNavigation Screen (all those little green lines in the image) as the top navigation. In order to do that, as I created each of the pages I would hover over the CoreNavigation Object in the Sketchflow Map. When the utilities drawer (the small menu that pops down under a node when you hover over it) shows click on the third little icon and drag it onto the page node you want a navigation screen on. Once I created all the screens I setup the navigation by opening up each screen and right clicking on the objects that needed to point to somewhere else in the prototype. Once I was done with the main page, my Home Navigation Page, it looked something like this in the Expression Blend Designer. I fleshed out each of the additional screens. Once I was done I wanted to try out the deployment package. The way to deploy a Sketchflow Prototype is to merely click on File –> Package SketchFlow Project and a prompt will appear. In the prompt enter what you want the package to be called. I like to see the files generated afterwards too, so I checked the box to see that. When Expression Blend is done generating everything you’ll have a directory like the one shown below, with all the needed files for deployment. Now these files can be copied or moved to any location for viewing. One can even copy them (such as via FTP) to a server location to share with others. Once they are deployed and you run the "TestPage.html" the other features of the Sketchflow Package are available. In the image below I have tagged a few sections to show the Sketchflow Player Features. To the top left is the navigation, which provides a clearly defined area of movement in a list. To the center right is the actual prototype application. I have placed lists of things and made edits. On the left hand side is the highlight feature, which is available in the Feedback section of the lower left. On the right hand list I underlined the Autochart with an orange marker, and marked out two list items with a red marker. In the lower left hand side in the Feedback section is also an area to type in your feedback. This can be useful for time based feedback, when you post this somewhere and want people to provide subsequent follow up feedback. Overall lots of great features, that enable some fairly rapid prototyping with customers. Once one is familiar with the steps and parts of this Sketchflow Prototype Capabilities it is easy to step through an application without even stopping. It really is that easy. So get hold of Expression Blend 3 and get ramped up on Sketchflow, it will pay off in the design phases to do so! Original Entry

Read the article

Using Unity – Part 3

- by nmarun

The previous blog was about registering and invoking different types dynamically. In this one I’d like to show how Unity manages/disposes the instances – say hello to Lifetime Managers. When a type gets registered, either through the config file or when RegisterType method is explicitly called, the default behavior is that the container uses a transient lifetime manager. In other words, the unity container creates a new instance of the type when Resolve or ResolveAll method is called. Whereas, when you register an existing object using the RegisterInstance method, the container uses a container controlled lifetime manager - a singleton pattern. It does this by storing the reference of the object and that means so as long as the container is ‘alive’, your registered instance does not go out of scope and will be disposed only after the container either goes out of scope or when the code explicitly disposes the container. Let’s see how we can use these and test if something is a singleton or a transient instance. Continuing on the same solution used in the previous blogs, I have made the following changes: First is to add typeAlias elements for TransientLifetimeManager type: 1: <typeAlias alias="transient" type="Microsoft.Practices.Unity.TransientLifetimeManager, Microsoft.Practices.Unity"/> You then need to tell what type(s) you want to be transient by nature: 1: <type type="IProduct" mapTo="Product2"> 2: <lifetime type="transient" /> 3: </type> 4:  The lifetime element’s type attribute matches with the alias attribute of the typeAlias element. Now since ‘transient’ is the default behavior, you can have a concise version of the same as line 4 shows. Also note that I’ve changed the mapTo attribute from ‘Product’ to ‘Product2’. I’ve done this to help understand the transient nature of the instance of the type Product2. By making this change, you are basically saying when a type of IProduct needs to be resolved, Unity should create an instance of Product2 by default. 1: public string WriteProductDetails() 2: { 3: return string.Format("Name: {0}<br/>Category: {1}<br/>Mfg Date: {2}<br/>Hash Code: {3}", 4: Name, Category, MfgDate.ToString("MM/dd/yyyy hh:mm:ss tt"), GetHashCode()); 5: } Again, the above change is purely for the purpose of making the example more clear to understand. The display will show the full date and also displays the hash code of the current instance. The GetHashCode() method returns an integer when an instance gets created – a new integer for every instance. When you run the application, you’ll see something like the below: Now when you click on the ‘Get Product2 Instance’ button, you’ll see that the Mfg Date (which is set in the constructor) and the Hash Code are different from the one created on page load. This proves to us that a new instance is created every single time. To make this a singleton, we need to add a type alias for the ContainerControlledLifetimeManager class and then change the type attribute of the lifetime element to singleton. 1: <typeAlias alias="singleton" type="Microsoft.Practices.Unity.ContainerControlledLifetimeManager, Microsoft.Practices.Unity"/> 2: ... 3: <type type="IProduct" mapTo="Product2"> 4: <lifetime type="singleton" /> 5: </type> Running the application now gets me the following output: Click on the button below and you’ll see that the Mfg Date and the Hash code remain unchanged => the unity container is storing the reference the first time it is created and then returns the same instance every time the type needs to be resolved. Digging more deeper into this, Unity provides more than the two lifetime managers. ExternallyControlledLifetimeManager – maintains a weak reference to type mappings and instances. Unity returns the same instance as long as the some code is holding a strong reference to this instance. For this, you need: 1: <typeAlias alias="external" type="Microsoft.Practices.Unity.ExternallyControlledLifetimeManager, Microsoft.Practices.Unity"/> 2: ... 3: <type type="IProduct" mapTo="Product2"> 4: <lifetime type="external" /> 5: </type> PerThreadLifetimeManager – Unity returns a unique instance of an object for each thread – so this effectively is a singleton behavior on a per-thread basis. 1: <typeAlias alias="perThread" type="Microsoft.Practices.Unity.PerThreadLifetimeManager, Microsoft.Practices.Unity"/> 2: ... 3: <type type="IProduct" mapTo="Product2"> 4: <lifetime type="perThread" /> 5: </type> One thing to note about this is that if you use RegisterInstance method to register an existing object, this instance will be returned for every thread, making this a purely singleton behavior. Needless to say, this type of lifetime management is useful in multi-threaded applications (duh!!). I hope this blog provided some basics on lifetime management of objects resolved in Unity and in the next blog, I’ll talk about Injection. Please see the code used here.

Search Results

Search found 13372 results on 535 pages for 'anonymous objects'.

Page 492/535 | < Previous Page | 488 489 490 491 492 493 494 495 496 497 498 499 | Next Page >

- by Software Monkey

- by Corey Kennedy

- by mfinni

- by user979276

- by Oliver Salzburg

- by Jon

- by dotancohen

- by thebluefox

- by Justin

- by widgisoft

- by user1014130

- by Darkseal

- by WilliamKF

- by user221486

- by Steve

- by Richard Knop

- by Jon

- by Lennart Regebro

- by Crystal

- by Murari

- by user663414

- by ScottGu

- by Reed

- by GeekAgilistMercenary

- by nmarun

< Previous Page | 488 489 490 491 492 493 494 495 496 497 498 499 | Next Page >