Search Results

Search found 19841 results on 794 pages for 'programming resources'.

Page 499/794 | < Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506  | Next Page >

• Windows Azure – Write, Run or Use Software

  - by BuckWoody

  Windows Azure is a platform that has you covered, whether you need to write software, run software that is already written, or Install and use “canned” software whether you or someone else wrote it. Like any platform, it’s a set of tools you can use where it makes sense to solve a problem. The primary location for Windows Azure information is located at http://windowsazure.com. You can find everything there from the development kits for writing software to pricing, licensing and tutorials on all of that. I have a few links here for learning to use Windows Azure – although it’s best if you focus not on the tools, but what you want to solve. I’ve got it broken down here into various sections, so you can quickly locate things you want to know. I’ll include resources here from Microsoft and elsewhere – I use these same resources in the Architectural Design Sessions (ADS) I do with my clients worldwide. Write Software Also called “Platform as a Service” (PaaS), Windows Azure has lots of components you can use together or separately that allow you to write software in .NET or various Open Source languages to work completely online, or in partnership with code you have on-premises or both – even if you’re using other cloud providers. Keep in mind that all of the features you see here can be used together, or independently. For instance, you might only use a Web Site, or use Storage, but you can use both together. You can access all of these components through standard REST API calls, or using our Software Development Kit’s API’s, which are a lot easier. In any case, you simply use Visual Studio, Eclipse, Cloud9 IDE, or even a text editor to write your code from a Mac, PC or Linux.  Components you can use: Azure Web Sites: Windows Azure Web Sites allow you to quickly write an deploy websites, without setting a Virtual Machine, installing a web server or configuring complex settings. They work alone, with other Windows Azure Web Sites, or with other parts of Windows Azure. Web and Worker Roles: Windows Azure Web Roles give you a full stateless computing instance with Internet Information Services (IIS) installed and configured. Windows Azure Worker Roles give you a full stateless computing instance without Information Services (IIS) installed, often used in a "Services" mode. Scale-out is achieved either manually or programmatically under your control. Storage: Windows Azure Storage types include Blobs to store raw binary data, Tables to use key/value pair data (like NoSQL data structures), Queues that allow interaction between stateless roles, and a relational SQL Server database. Other Services: Windows Azure has many other services such as a security mechanism, a Cache (memcacheD compliant), a Service Bus, a Traffic Manager and more. Once again, these features can be used with a Windows Azure project, or alone based on your needs. Various Languages: Windows Azure supports the .NET stack of languages, as well as many Open-Source languages like Java, Python, PHP, Ruby, NodeJS, C++ and more.   Use Software Also called “Software as a Service” (SaaS) this often means consumer or business-level software like Hotmail or Office 365. In other words, you simply log on, use the software, and log off – there’s nothing to install, and little to even configure. For the Information Technology professional, however, It’s not quite the same. We want software that provides services, but in a platform. That means we want things like Hadoop or other software we don’t want to have to install and configure.  Components you can use: Kits: Various software “kits” or packages are supported with just a few clicks, such as Umbraco, Wordpress, and others. Windows Azure Media Services: Windows Azure Media Services is a suite of services that allows you to upload media for encoding, processing and even streaming – or even one or more of those functions. We can add DRM and even commercials to your media if you like. Windows Azure Media Services is used to stream large events all the way down to small training videos. High Performance Computing and “Big Data”: Windows Azure allows you to scale to huge workloads using a few clicks to deploy Hadoop Clusters or the High Performance Computing (HPC) nodes, accepting HPC Jobs, Pig and Hive Jobs, and even interfacing with Microsoft Excel. Windows Azure Marketplace: Windows Azure Marketplace offers data and programs you can quickly implement and use – some free, some for-fee.   Run Software Also known as “Infrastructure as a Service” (IaaS), this offering allows you to build or simply choose a Virtual Machine to run server-based software.  Components you can use: Persistent Virtual Machines: You can choose to install Windows Server, Windows Server with Active Directory, with SQL Server, or even SharePoint from a pre-configured gallery. You can configure your own server images with standard Hyper-V technology and load them yourselves – and even bring them back when you’re done. As a new offering, we also even allow you to select various distributions of Linux – a first for Microsoft. Windows Azure Connect: You can connect your on-premises networks to Windows Azure Instances. Storage: Windows Azure Storage can be used as a remote backup, a hybrid storage location and more using software or even hardware appliances.   Decision Matrix With all of these options, you can use Windows Azure to solve just about any computing problem. It’s often hard to know when to use something on-premises, in the cloud, and what kind of service to use. I’ve used a decision matrix in the last couple of years to take a particular problem and choose the proper technology to solve it. It’s all about options – there is no “silver bullet”, whether that’s Windows Azure or any other set of functions. I take the problem, decide which particular component I want to own and control – and choose the column that has that box darkened. For instance, if I have to control the wiring for a solution (a requirement in some military and government installations), that means the “Networking” component needs to be dark, and so I select the “On Premises” column for that particular solution. If I just need the solution provided and I want no control at all, I can look as “Software as a Service” solutions. Security, Pricing, and Other Info  Security: Security is one of the first questions you should ask in any distributed computing environment. We have certification info, coding guidelines and more, even a general “Request for Information” RFI Response already created for you.   Pricing: Are there licenses? How much does this cost? Is there a way to estimate the costs in this new environment? New Features: Many new features were added to Windows Azure - a good roundup of those changes can be found here. Support: Software Support on Virtual Machines, general support.    

  Read the article

• NUMA-aware placement of communication variables

  - by Dave

  For classic NUMA-aware programming I'm typically most concerned about simple cold, capacity and compulsory misses and whether we can satisfy the miss by locally connected memory or whether we have to pull the line from its home node over the coherent interconnect -- we'd like to minimize channel contention and conserve interconnect bandwidth. That is, for this style of programming we're quite aware of where memory is homed relative to the threads that will be accessing it. Ideally, a page is collocated on the node with the thread that's expected to most frequently access the page, as simple misses on the page can be satisfied without resorting to transferring the line over the interconnect. The default "first touch" NUMA page placement policy tends to work reasonable well in this regard. When a virtual page is first accessed, the operating system will attempt to provision and map that virtual page to a physical page allocated from the node where the accessing thread is running. It's worth noting that the node-level memory interleaving granularity is usually a multiple of the page size, so we can say that a given page P resides on some node N. That is, the memory underlying a page resides on just one node. But when thinking about accesses to heavily-written communication variables we normally consider what caches the lines underlying such variables might be resident in, and in what states. We want to minimize coherence misses and cache probe activity and interconnect traffic in general. I don't usually give much thought to the location of the home NUMA node underlying such highly shared variables. On a SPARC T5440, for instance, which consists of 4 T2+ processors connected by a central coherence hub, the home node and placement of heavily accessed communication variables has very little impact on performance. The variables are frequently accessed so likely in M-state in some cache, and the location of the home node is of little consequence because a requester can use cache-to-cache transfers to get the line. Or at least that's what I thought. Recently, though, I was exploring a simple shared memory point-to-point communication model where a client writes a request into a request mailbox and then busy-waits on a response variable. It's a simple example of delegation based on message passing. The server polls the request mailbox, and having fetched a new request value, performs some operation and then writes a reply value into the response variable. As noted above, on a T5440 performance is insensitive to the placement of the communication variables -- the request and response mailbox words. But on a Sun/Oracle X4800 I noticed that was not the case and that NUMA placement of the communication variables was actually quite important. For background an X4800 system consists of 8 Intel X7560 Xeons . Each package (socket) has 8 cores with 2 contexts per core, so the system is 8x8x2. Each package is also a NUMA node and has locally attached memory. Every package has 3 point-to-point QPI links for cache coherence, and the system is configured with a twisted ladder "mobius" topology. The cache coherence fabric is glueless -- there's not central arbiter or coherence hub. The maximum distance between any two nodes is just 2 hops over the QPI links. For any given node, 3 other nodes are 1 hop distant and the remaining 4 nodes are 2 hops distant. Using a single request (client) thread and a single response (server) thread, a benchmark harness explored all permutations of NUMA placement for the two threads and the two communication variables, measuring the average round-trip-time and throughput rate between the client and server. In this benchmark the server simply acts as a simple transponder, writing the request value plus 1 back into the reply field, so there's no particular computation phase and we're only measuring communication overheads. In addition to varying the placement of communication variables over pairs of nodes, we also explored variations where both variables were placed on one page (and thus on one node) -- either on the same cache line or different cache lines -- while varying the node where the variables reside along with the placement of the threads. The key observation was that if the client and server threads were on different nodes, then the best placement of variables was to have the request variable (written by the client and read by the server) reside on the same node as the client thread, and to place the response variable (written by the server and read by the client) on the same node as the server. That is, if you have a variable that's to be written by one thread and read by another, it should be homed with the writer thread. For our simple client-server model that means using split request and response communication variables with unidirectional message flow on a given page. This can yield up to twice the throughput of less favorable placement strategies. Our X4800 uses the QPI 1.0 protocol with source-based snooping. Briefly, when node A needs to probe a cache line it fires off snoop requests to all the nodes in the system. Those recipients then forward their response not to the original requester, but to the home node H of the cache line. H waits for and collects the responses, adjudicates and resolves conflicts and ensures memory-model ordering, and then sends a definitive reply back to the original requester A. If some node B needed to transfer the line to A, it will do so by cache-to-cache transfer and let H know about the disposition of the cache line. A needs to wait for the authoritative response from H. So if a thread on node A wants to write a value to be read by a thread on node B, the latency is dependent on the distances between A, B, and H. We observe the best performance when the written-to variable is co-homed with the writer A. That is, we want H and A to be the same node, as the writer doesn't need the home to respond over the QPI link, as the writer and the home reside on the very same node. With architecturally informed placement of communication variables we eliminate at least one QPI hop from the critical path. Newer Intel processors use the QPI 1.1 coherence protocol with home-based snooping. As noted above, under source-snooping a requester broadcasts snoop requests to all nodes. Those nodes send their response to the home node of the location, which provides memory ordering, reconciles conflicts, etc., and then posts a definitive reply to the requester. In home-based snooping the snoop probe goes directly to the home node and are not broadcast. The home node can consult snoop filters -- if present -- and send out requests to retrieve the line if necessary. The 3rd party owner of the line, if any, can respond either to the home or the original requester (or even to both) according to the protocol policies. There are myriad variations that have been implemented, and unfortunately vendor terminology doesn't always agree between vendors or with the academic taxonomy papers. The key is that home-snooping enables the use of a snoop filter to reduce interconnect traffic. And while home-snooping might have a longer critical path (latency) than source-based snooping, it also may require fewer messages and less overall bandwidth. It'll be interesting to reprise these experiments on a platform with home-based snooping. While collecting data I also noticed that there are placement concerns even in the seemingly trivial case when both threads and both variables reside on a single node. Internally, the cores on each X7560 package are connected by an internal ring. (Actually there are multiple contra-rotating rings). And the last-level on-chip cache (LLC) is partitioned in banks or slices, which with each slice being associated with a core on the ring topology. A hardware hash function associates each physical address with a specific home bank. Thus we face distance and topology concerns even for intra-package communications, although the latencies are not nearly the magnitude we see inter-package. I've not seen such communication distance artifacts on the T2+, where the cache banks are connected to the cores via a high-speed crossbar instead of a ring -- communication latencies seem more regular.

  Read the article

• The Great Divorce

  - by BlackRabbitCoder

  I have a confession to make: I've been in an abusive relationship for more than 17 years now.  Yes, I am not ashamed to admit it, but I'm finally doing something about it. I met her in college, she was new and sexy and amazingly fast -- and I'd never met anything like her before.  Her style and her power captivated me and I couldn't wait to learn more about her.  I took a chance on her, and though I learned a lot from her -- and will always be grateful for my time with her -- I think it's time to move on. Her name was C++, and she so outshone my previous love, C, that any thoughts of going back evaporated in the heat of this new romance.  She promised me she'd be gentle and not hurt me the way C did.  She promised me she'd clean-up after herself better than C did.  She promised me she'd be less enigmatic and easier to keep happy than C was.  But I was deceived.  Oh sure, as far as truth goes, it wasn't a complete lie.  To some extent she was more fun, more powerful, safer, and easier to maintain.  But it just wasn't good enough -- or at least it's not good enough now. I loved C++, some part of me still does, it's my first-love of programming languages and I recognize its raw power, its blazing speed, and its improvements over its predecessor.  But with today's hardware, at speeds we could only dream to conceive of twenty years ago, that need for speed -- at the cost of all else -- has died, and that has left my feelings for C++ moribund. If I ever need to write an operating system or a device driver, then I might need that speed.  But 99% of the time I don't.  I'm a business-type programmer and chances are 90% of you are too, and even the ones who need speed at all costs may be surprised by how much you sacrifice for that.   That's not to say that I don't want my software to perform, and it's not to say that in the business world we don't care about speed or that our job is somehow less difficult or technical.  There's many times we write programs to handle millions of real-time updates or handle thousands of financial transactions or tracking trading algorithms where every second counts.  But if I choose to write my code in C++ purely for speed chances are I'll never notice the speed increase -- and equally true chances are it will be far more prone to crash and far less easy to maintain.  Nearly without fail, it's the macro-optimizations you need, not the micro-optimizations.  If I choose to write a O(n2) algorithm when I could have used a O(n) algorithm -- that can kill me.  If I choose to go to the database to load a piece of unchanging data every time instead of caching it on first load -- that too can kill me.  And if I cross the network multiple times for pieces of data instead of getting it all at once -- yes that can also kill me.  But choosing an overly powerful and dangerous mid-level language to squeeze out every last drop of performance will realistically not make stock orders process any faster, and more likely than not open up the system to more risk of crashes and resource leaks. And that's when my love for C++ began to die.  When I noticed that I didn't need that speed anymore.  That that speed was really kind of a lie.  Sure, I can be super efficient and pack bits in a byte instead of using separate boolean values.  Sure, I can use an unsigned char instead of an int.  But in the grand scheme of things it doesn't matter as much as you think it does.  The key is maintainability, and that's where C++ failed me.  I like to tell the other developers I work with that there's two levels of correctness in coding: Is it immediately correct? Will it stay correct? That is, you can hack together any piece of code and make it correct to satisfy a task at hand, but if a new developer can't come in tomorrow and make a fairly significant change to it without jeopardizing that correctness, it won't stay correct. Some people laugh at me when I say I now prefer maintainability over speed.  But that is exactly the point.  If you focus solely on speed you tend to produce code that is much harder to maintain over the long hall, and that's a load of technical debt most shops can't afford to carry and end up completely scrapping code before it's time.  When good code is written well for maintainability, though, it can be correct both now and in the future. And you know the best part is?  My new love is nearly as fast as C++, and in some cases even faster -- and better than that, I know C# will treat me right.  Her creators have poured hundreds of thousands of hours of time into making her the sexy beast she is today.  They made her easy to understand and not an enigmatic mess.  They made her consistent and not moody and amorphous.  And they made her perform as fast as I care to go by optimizing her both at compile time and a run-time. Her code is so elegant and easy on the eyes that I'm not worried where she will run to or what she'll pull behind my back.  She is powerful enough to handle all my tasks, fast enough to execute them with blazing speed, maintainable enough so that I can rely on even fairly new peers to modify my work, and rich enough to allow me to satisfy any need.  C# doesn't ask me to clean up her messes!  She cleans up after herself and she tries to make my life easier for me by taking on most of those optimization tasks C++ asked me to take upon myself.  Now, there are many of you who would say that I am the cause of my own grief, that it was my fault C++ didn't behave because I didn't pay enough attention to her.  That I alone caused the pain she inflicted on me.  And to some extent, you have a point.  But she was so high maintenance, requiring me to know every twist and turn of her vast and unrestrained power that any wrong term or bout of forgetfulness was met with painful reminders that she wasn't going to watch my back when I made a mistake.  But C#, she loves me when I'm good, and she loves me when I'm bad, and together we make beautiful code that is both fast and safe. So that's why I'm leaving C++ behind.  She says she's changing for me, but I have no interest in what C++0x may bring.  Oh, I'll still keep in touch, and maybe I'll see her now and again when she brings her problems to my door and asks for some attention -- for I always have a soft spot for her, you see.  But she's out of my house now.  I have three kids and a dog and a cat, and all require me to clean up after them, why should I have to clean up after my programming language as well?

  Read the article

• Christmas in the Clouds

  - by andrewbrust

  I have been spending the last 2 weeks immersing myself in a number of Windows Azure and SQL Azure technologies.  And in setting up a new business (I’ll speak more about that in the future), I have also become a customer of Microsoft’s BPOS (Business Productivity Online Services).  In short, it has been a fortnight of Microsoft cloud computing. On the Azure side, I’ve looked, of course, at Web Roles and Worker Roles.  But I’ve also looked at Azure Storage’s REST API (including coding to it directly), I’ve looked at Azure Drive and the new VM Role; I’ve looked quite a bit at SQL Azure (including the project “Houston” Silverlight UI) and I’ve looked at SQL Azure labs’ OData service too. I’ve also looked at DataMarket and its integration with both PowerPivot and native Excel.  Then there’s AppFabric Caching, SQL Azure Reporting (what I could learn of it) and the Visual Studio tooling for Azure, including the storage of certificate-based credentials.  And to round it out with some user stuff, on the BPOS side, I’ve been working with Exchange Online, SharePoint Online and LiveMeeting. I have to say I like a lot of what I’ve been seeing.  Azure’s not perfect, and BPOS certainly isn’t either.  But there’s good stuff in all these products, and there’s a lot of value. Azure Goes Deep Most people know that Web and Worker roles put the platform in charge of spinning virtual machines up and down, and keeping them up to date. But you can go way beyond that now.  The still-in-beta VM Role gives you the power to craft the machine (much as does Amazon’s EC2), though it takes away the platform’s self-managing attributes.  It still spins instances up and down, making drive storage non-durable, but Azure Drive gives you the ability to store VHD files as blobs and mount them as virtual hard drives that are readable and writeable.  Whether with Azure Storage or SQL Azure, Azure does data.  And OData is everywhere.  Azure Table Storage supports an OData Interface.  So does SQL Azure and so does DataMarket (the former project “Dallas”).  That means that Azure data repositories aren’t just straightforward to provision and configure…they’re also easy to program against, from just about any programming environment, in a RESTful manner.  And for more .NET-centric implementations, Azure AppFabric caching takes the technology formerly known as “Velocity” and throws it up into the cloud, speeding data access even more. Snapping in Place Once you get the hang of it, this stuff just starts to work in a way that becomes natural to understand.  I wasn’t expecting that, and I was really happy to discover it. In retrospect, I am not surprised, because I think the various Azure teams are the center of gravity for Redmond’s innovation right now.  The products belie this and so do my observations of the product teams’ motivation and high morale.  It is really good to see this; Microsoft needs to lead somewhere, and they need to be seen as the underdog while doing so.  With Azure, both requirements are in place.   BPOS: Bad Acronym, Easy Setup BPOS is about products you already know; Exchange, SharePoint, Live Meeting and Office Communications Server.  As such, it’s hard not to be underwhelmed by BPOS.  Until you realize how easy it makes it to get all that stuff set up.  I would say that from sign-up to productive use took me about 45 minutes…and that included the time necessary to wrestle with my DNS provider, set up Outlook and my SmartPhone up to talk to the Exchange account, create my SharePoint site collection, and configure the Outlook Conferencing add-in to talk to the provisioned Live Meeting account. Never before did I think setting up my own Exchange mail could come anywhere close to the simplicity of setting up an SMTP/POP account, and yet BPOS actually made it faster.   What I want from my Azure Christmas Next Year Not everything about Microsoft’s cloud is good.  I close this post with a list of things I’d like to see addressed: BPOS offerings are still based on the 2007 Wave of Microsoft server technologies.  We need to get to 2010, and fast.  Arguably, the 2010 products should have been released to the off-premises channel before the on-premise sone.  Office 365 can’t come fast enough. Azure’s Internet tooling and domain naming, is scattered and confusing.  Deployed ASP.NET applications go to cloudapp.net; SQL Azure and Azure storage work off windows.net.  The Azure portal and Project Houston are at azure.com.  Then there’s appfabriclabs.com and sqlazurelabs.com.  There is a new Silverlight portal that replaces most, but not all of the HTML ones.  And Project Houston is Silvelright-based too, though separate from the Silverlight portal tooling. Microsoft is the king off tooling.  They should not make me keep an entire OneNote notebook full of portal links, account names, access keys, assemblies and namespaces and do so much CTRL-C/CTRL-V work.  I’d like to see more project templates, have them automatically reference the appropriate assemblies, generate the right using/Imports statements and prime my config files with the right markup.  Then I want a UI that lets me log in with my Live ID and pick the appropriate project, database, namespace and key string to get set up fast. Beta programs, if they’re open, should onboard me quickly.  I know the process is difficult and everyone’s going as fast as they can.  But I don’t know why it’s so difficult or why it takes so long.  Getting developers up to speed on new features quickly helps popularize the platform.  Make this a priority. Make Azure accessible from the simplicity platforms, i.e. ASP.NET Web Pages (Razor) and LightSwitch.  Support .NET 4 now.  Make WebMatrix, IIS Express and SQL Compact work with the Azure development fabric. Have HTML helpers make Azure programming easier.  Have LightSwitch work with SQL Azure and not require SQL Express.  LightSwitch has some promising Azure integration now.  But we need more.  WebMatrix has none and that’s just silly, now that the Extra Small Instance is being introduced. The Windows Azure Platform Training Kit is great.  But I want Microsoft to make it even better and I want them to evangelize it much more aggressively.  There’s a lot of good material on Azure development out there, but it’s scattered in the same way that the platform is.   The Training Kit ties a lot of disparate stuff together nicely.  Make it known. Should Old Acquaintance Be Forgot All in all, diving deep into Azure was a good way to end the year.  Diving deeper into Azure should a great way to spend next year, not just for me, but for Microsoft too.

  Read the article

• PostSharp, Obfuscation, and IL

  - by Simon Cooper

  Aspect-oriented programming (AOP) is a relatively new programming paradigm. Originating at Xerox PARC in 1994, the paradigm was first made available for general-purpose development as an extension to Java in 2001. From there, it has quickly been adapted for use in all the common languages used today. In the .NET world, one of the primary AOP toolkits is PostSharp. Attributes and AOP Normally, attributes in .NET are entirely a metadata construct. Apart from a few special attributes in the .NET framework, they have no effect whatsoever on how a class or method executes within the CLR. Only by using reflection at runtime can you access any attributes declared on a type or type member. PostSharp changes this. By declaring a custom attribute that derives from PostSharp.Aspects.Aspect, applying it to types and type members, and running the resulting assembly through the PostSharp postprocessor, you can essentially declare 'clever' attributes that change the behaviour of whatever the aspect has been applied to at runtime. A simple example of this is logging. By declaring a TraceAttribute that derives from OnMethodBoundaryAspect, you can automatically log when a method has been executed: public class TraceAttribute : PostSharp.Aspects.OnMethodBoundaryAspect { public override void OnEntry(MethodExecutionArgs args) { MethodBase method = args.Method; System.Diagnostics.Trace.WriteLine( String.Format( "Entering {0}.{1}.", method.DeclaringType.FullName, method.Name)); } public override void OnExit(MethodExecutionArgs args) { MethodBase method = args.Method; System.Diagnostics.Trace.WriteLine( String.Format( "Leaving {0}.{1}.", method.DeclaringType.FullName, method.Name)); } } [Trace] public void MethodToLog() { ... } Now, whenever MethodToLog is executed, the aspect will automatically log entry and exit, without having to add the logging code to MethodToLog itself. PostSharp Performance Now this does introduce a performance overhead - as you can see, the aspect allows access to the MethodBase of the method the aspect has been applied to. If you were limited to C#, you would be forced to retrieve each MethodBase instance using Type.GetMethod(), matching on the method name and signature. This is slow. Fortunately, PostSharp is not limited to C#. It can use any instruction available in IL. And in IL, you can do some very neat things. Ldtoken C# allows you to get the Type object corresponding to a specific type name using the typeof operator: Type t = typeof(Random); The C# compiler compiles this operator to the following IL: ldtoken [mscorlib]System.Random call class [mscorlib]System.Type [mscorlib]System.Type::GetTypeFromHandle( valuetype [mscorlib]System.RuntimeTypeHandle) The ldtoken instruction obtains a special handle to a type called a RuntimeTypeHandle, and from that, the Type object can be obtained using GetTypeFromHandle. These are both relatively fast operations - no string lookup is required, only direct assembly and CLR constructs are used. However, a little-known feature is that ldtoken is not just limited to types; it can also get information on methods and fields, encapsulated in a RuntimeMethodHandle or RuntimeFieldHandle: // get a MethodBase for String.EndsWith(string) ldtoken method instance bool [mscorlib]System.String::EndsWith(string) call class [mscorlib]System.Reflection.MethodBase [mscorlib]System.Reflection.MethodBase::GetMethodFromHandle( valuetype [mscorlib]System.RuntimeMethodHandle) // get a FieldInfo for the String.Empty field ldtoken field string [mscorlib]System.String::Empty call class [mscorlib]System.Reflection.FieldInfo [mscorlib]System.Reflection.FieldInfo::GetFieldFromHandle( valuetype [mscorlib]System.RuntimeFieldHandle) These usages of ldtoken aren't usable from C# or VB, and aren't likely to be added anytime soon (Eric Lippert's done a blog post on the possibility of adding infoof, methodof or fieldof operators to C#). However, PostSharp deals directly with IL, and so can use ldtoken to get MethodBase objects quickly and cheaply, without having to resort to string lookups. The kicker However, there are problems. Because ldtoken for methods or fields isn't accessible from C# or VB, it hasn't been as well-tested as ldtoken for types. This has resulted in various obscure bugs in most versions of the CLR when dealing with ldtoken and methods, and specifically, generic methods and methods of generic types. This means that PostSharp was behaving incorrectly, or just plain crashing, when aspects were applied to methods that were generic in some way. So, PostSharp has to work around this. Without using the metadata tokens directly, the only way to get the MethodBase of generic methods is to use reflection: Type.GetMethod(), passing in the method name as a string along with information on the signature. Now, this works fine. It's slower than using ldtoken directly, but it works, and this only has to be done for generic methods. Unfortunately, this poses problems when the assembly is obfuscated. PostSharp and Obfuscation When using ldtoken, obfuscators don't affect how PostSharp operates. Because the ldtoken instruction directly references the type, method or field within the assembly, it is unaffected if the name of the object is changed by an obfuscator. However, the indirect loading used for generic methods was breaking, because that uses the name of the method when the assembly is put through the PostSharp postprocessor to lookup the MethodBase at runtime. If the name then changes, PostSharp can't find it anymore, and the assembly breaks. So, PostSharp needs to know about any changes an obfuscator does to an assembly. The way PostSharp does this is by adding another layer of indirection. When PostSharp obfuscation support is enabled, it includes an extra 'name table' resource in the assembly, consisting of a series of method & type names. When PostSharp needs to lookup a method using reflection, instead of encoding the method name directly, it looks up the method name at a fixed offset inside that name table: MethodBase genericMethod = typeof(ContainingClass).GetMethod(GetNameAtIndex(22)); PostSharp.NameTable resource: ... 20: get_Prop1 21: set_Prop1 22: DoFoo 23: GetWibble When the assembly is later processed by an obfuscator, the obfuscator can replace all the method and type names within the name table with their new name. That way, the reflection lookups performed by PostSharp will now use the new names, and everything will work as expected: MethodBase genericMethod = typeof(#kGy).GetMethod(GetNameAtIndex(22)); PostSharp.NameTable resource: ... 20: #kkA 21: #zAb 22: #EF5a 23: #2tg As you can see, this requires direct support by an obfuscator in order to perform these rewrites. Dotfuscator supports it, and now, starting with SmartAssembly 6.6.4, SmartAssembly does too. So, a relatively simple solution to a tricky problem, with some CLR bugs thrown in for good measure. You don't see those every day!

  Read the article

• Not attending the LUGM mini-meetup - 05. Oct 2013

  Not attending a meeting of the LUGM can be fun, too. It's getting a bit of a habit that Ish is organising small gatherings, aka mini-meetups, of the Linux User Group Mauritius/Meta (LUGM) almost every Saturday. There they mainly discuss and talk about various elements of using Linux as ones main operating systems and the possibilities you are going to have. On top of course, some tips & tricks about mastering the command line and initial steps in scripting or even writing HTML. In general, sounds like a good portion of fun and great spirit of community. Unfortunately, I'm usually quite busy with private and family matters during the weekend and so I already signalised that I wouldn't be around. Well, at least not physically... But this Saturday a couple of things worked out faster than expected and so I was hanging out on my machine. I made virtual contact with one of Pawan's messages over on Facebook... And somehow that kicked off some kind of an online game fun on basic configuration of Apache HTTPd 2.2.x, PHP 5.x and how to improve the overall performance of a newly installed blog based on WordPress. Default configuration files Nitin's website finally came alive and despite the dark theme and the hidden Apple 'fanboy' advertisement I was more interested in the technical situation. As with any new installation there is usually quite some adjustment to be done. And Nitin's page was no exception. Unfortunately, out of the box installations of Apache httpd and PHP are too verbose and expose too much information under the hood. You might think that this isn't really a problem at all, well, think about it again after completely reading this article. First, I checked the HTTP response headers - using either Chrome Developer Tools or Firefox Web Developer extension - of Nitin's page and based on that I advised him to lower the noise levels a little bit. It's not really necessary that detailed information about web server software and scripting language has to be published in every response made. Quite a number of script kiddies and exploits actually check for version specifics prior to an attack. So, removing at least version details hardens the system a little bit. In particular, I'm talking about these response values: Server X-Powered-By How to achieve that? By tweaking the configuration files... Namely, we are going to look into the following ones: apache2.conf httpd.conf .htaccess php.ini The above list contains some additional files, I'm talking about in the next paragraphs. Anyway, those are the ones involved. Tweaking Apache Open your favourite text editor and start to modify the apache2.conf. Eventually, you might like to have a quick peak at the file to see whether it is necessary to adjust it or not. Following is a handy combination of commands to get an overview of your active directives: # sudo grep -v '#' /etc/apache2/apache2.conf | grep -v '^$' | less There you keep an eye on those two Apache directives: ServerSignature Off ServerTokens Prod If that's not the case, change them as highlighted above. In order to activate your modifications you have to restart Apache httpd server. On Debian and Ubuntu you might use apache2ctl for that, on other distributions you might have to use service or run the init-scripts again: # sudo apache2ctl configtestSyntax OK# sudo apache2ctl restart Refresh your website and check the HTTP response header. Tweaking PHP5 (a little bit) Next, check your php.ini file with the following statement: # sudo grep -v ';' /etc/php5/apache2/php.ini | grep -v '^$' | less And check the value of expose_php = Off Again, if it's not as highlighted, change it... Some more Apache love Okay, back to Apache it might also be interesting to improve the situation about browser caching and removing more obsolete information. When you run your website against the usual performance checks like Google Page Speed and Yahoo YSlow you might see those check points with bad grades on a standard, default configuration. Well, this can be done easily. Configure entity tags (ETags) ETags are only interesting when you run your websites on a farm of multiple web servers. Removing this data for your static resources is very simple in Apache. As we are going to deal with the HTTP response header information you have to ensure that Apache is capable to manipulate them. First, check your enabled modules: # sudo ls -al /etc/apache2/mods-enabled/ | grep headers And in case that the 'headers' module is not listed, you have to enable it from the available ones: # sudo a2enmod headers Second, check your httpd.conf file (in case it exists): # sudo grep -v '#' /etc/apache2/httpd.conf | grep -v '^$' | less In newer (better said fresh) installations you might have to create a new configuration file below your conf.d folder with your favourite text editor like so: # sudo nano /etc/apache2/conf.d/headers.conf Then, in order to tweak your HTTP responses either check for those lines or add them: Header unset ETagFileETag None In case that your file doesn't exist or those lines are missing, feel free to create/add them. Afterwards, check your Apache configuration syntax and restart your running instances as already shown above: # sudo apache2ctl configtestSyntax OK# sudo apache2ctl restart Add Expires headers To improve the loading performance of your website, you should take some care into the proper configuration of how to leverage the browser's ability to cache certain resources and files. This is done by adding an Expires: value to the HTTP response header. Generally speaking it is advised that you specify a near-future, read: 1 week or a little bit more, for your static content like JavaScript files or Cascading Style Sheets. One solution to adjust this is to put some instructions into the .htaccess file in the root folder of your web site. Of course, this could also be placed into a more generic location of your Apache installation but honestly, I'd like to keep this at the web site level. Following some adjustments I'm currently using on this blog site: # Turn on Expires and set default to 0ExpiresActive OnExpiresDefault A0 # Set up caching on media files for 1 year (forever?)<FilesMatch "\.(flv|ico|pdf|avi|mov|ppt|doc|mp3|wmv|wav)$">ExpiresDefault A29030400Header append Cache-Control "public"</FilesMatch> # Set up caching on media files for 1 week<FilesMatch "\.(js|css)$">ExpiresDefault A604800Header append Cache-Control "public"</FilesMatch> # Set up caching on media files for 31 days<FilesMatch "\.(gif|jpg|jpeg|png|swf)$">ExpiresDefault A2678400Header append Cache-Control "public"</FilesMatch> As we are editing the .htaccess files, it is not necessary to restart Apache. In case that your web site doesn't load anymore or you're experiencing an error while trying to restart your httpd, check that the 'expires' module is actually an enabled module: # ls -al /etc/apache2/mods-enabled/ | grep expires# sudo a2enmod expires Of course, the instructions above a re not feature complete but I hope that they might provide a better default configuration for your LAMP stack. Resume of the day Within a couple of hours, and while being occupied with an eLearning course on SQL Server 2012, I had some good fun in helping and assisting other LUGM members while they were some kilometers away at Bagatelle. According to other blog articles it seems that Nitin had quite some moments of desperation. Just for the records: At no time it was my intention to either kick his butt or pull a leg on him. Simply, providing some input based on the lessons I've learned over the last couple of years configuring Apache HTTPd and PHP. Check out the other blogs, too: LUGM mini-meetup... Epic! Superb Saturday Linux Meetup And last but not least, the man himself: The end of a new beginning Cheers, and happy community'ing! Updates Due to our weekly Code & Coffee sessions in the MSCC community, I had a chance to talk to Nitin directly and he showed me the problems directly on his machine. This led to update this article hence the paragraphs on enabling the modules 'headers' and 'expires'.

  Read the article

• Corsair Hackers Reboot

  It wasn't easy for me to attend but it was absolutely worth to go. The Linux User Group of Mauritius (LUGM) organised another get-together for any open source enthusiast here on the island. Strangely named "Corsair Hackers Reboot" but it stands for a positive cause: "Corsair Hackers Reboot Event A collaborative activity involving LUGM, UoM Computer Club, Fortune Way Shopping Mall and several geeks from around the island, striving to put FOSS into homes & offices. The public is invited to discover and explore Free Software & Open Source." And it was a good opportunity for me and the kids to visit the east coast of Mauritius, too. Perfect timing It couldn't have been better... Why? Well, for two important reasons (in terms of IT): End of support for Microsoft Windows XP - 08.04.2014 Release of Ubuntu 14.04 Long Term Support - 17.04.2014 Quite funnily, those two IT dates weren't the initial reasons and only during the weeks of preparations we put those together. And therefore it was even more positive to promote the use of Linux and open source software in general to a broader audience. Getting there ... Thanks to the new motor way M3 and all the additional road work which has been completed recently it was very simple to get across the island in a very quick and relaxed manner. Compared to my trips in the early days of living in Mauritius (and riding on a scooter) it was very smooth and within less than an hour we hit Centrale de Flacq. Well, being in the city doesn't necessarily mean that one has arrived at the destination. But thanks to modern technology I had a quick look on Google Maps, and we finally managed to get a parking behind the huge bus terminal in Flacq. From there it was just a short walk to Fortune Way. The children were trying to count the number of buses... Well, lots and lots of buses - really impressive actually. What was presented? There were different areas set up. Right at the entrance one's attention was directly drawn towards the elevated hacker's stage. Similar to rock stars performing their gig there was bunch of computers, laptops and networking equipment in order to cater the right working conditions for coding/programming challenge(s) on the one hand and for the pen-testing or system hacking competition on the other hand. Personally, I was very impresses that actually Nitin took care of the pen-testing competition. He hardly started one year back with Linux in general, and Kali Linux specifically. Seeing his personal development from absolute newbie to a decent Linux system administrator within such a short period of time, is really impressive. His passion to open source software made him a living. Next, clock-wise seen, was the Kid's Corner with face-painting as the main attraction. Additionally, there were numerous paper print outs to colour. Plus a decent workstation with the educational suite GCompris. Of course, my little ones were into that. They already know GCompris since a while as they are allowed to use it on an IGEL thin client terminal here at home. To simplify my life, I set up GCompris as full-screen guest session on the server, and they can pass the login screen without any further obstacles. And because it's a thin client hooked up to a XDMCP remote session I don't have to worry about the hardware on their desk, too. The next section was the main attraction of the event: BYOD - Bring Your Own Device Well, compared to the usual context of BYOD the corsairs had a completely different intention. Here, you could bring your own laptop and a team of knowledgeable experts - read: geeks and so on - offered to fully convert your system on any Linux distribution of your choice. And even though I came later, I was told that the USB pen drives had been in permanent use. From being prepared via dd command over launching LiveCD session to finally installing a fresh Linux system on bare metal. Most interestingly, I did a similar job already a couple of months ago, while upgrading an existing Windows XP system to Xubuntu 13.10. So far, the female owner is very happy and enjoys her system almost every evening to go shopping online, checking mails, and reading latest news from the Anime world. Back to the Hackers event, Ish told me that they managed approximately 20 conversion during the day. Furthermore, Ajay and others gladly assisted some visitors with some tricky issues and by the end of the day you can call is a success. While I was around, there was a elderly male visitor that got a full-fledged system conversion to a Linux system running completely in French language. A little bit more to the centre it was Yasir's turn to demonstrate his Arduino hardware that he hooked up with an experimental electrical circuit board connected to an LCD matrix display. That's the real spirit of hacking, and he showed some minor adjustments on the fly while demo'ing the system. Also, very interesting there was a thermal sensor around. Personally, I think that platforms like the Arduino as well as the Raspberry Pi have a great potential at a very affordable price in order to bring a better understanding of electronics as well as computer programming to a broader audience. It would be great to see more of those experiments during future activities. And last but not least there were a small number of vendors. Amongst them was Emtel - once again as sponsor of the general internet connectivity - and another hardware supplier from Riche Terre shopping mall. They had a good collection of Android related gimmicks, like a autonomous web cam that can convert any TV with HDMI connector into an online video chat system given WiFi. It's actually kind of awesome to have a Skype or Google hangout video session on the big screen rather than on the laptop. Some pictures of the event LUGM: Great conversations on Linux, open source and free software during the Corsair Hackers Reboot LUGM: Educational workstation running GCompris suite attracted the youngest attendees of the day. Of course, face painting had to be done prior to hacking... LUGM: Nadim demoing some Linux specifics to interested visitors. Everyone was pretty busy during the whole day LUGM: The hacking competition, here pen-testing a wireless connection and access point between multiple machines LUGM: Well prepared workstations to be able to 'upgrade' visitors' machines to any Linux operating system Final thoughts Gratefully, during the preparations of the event I was invited to leave some comments or suggestions, and the team of the LUGM did a great job. The outdoor banner was a eye-catcher, the various flyers and posters for the event were clearly written and as far as I understood from the quick chats I had with Ish, Nadim, Nitin, Ajay, and of course others all were very happy about the event execution. Great job, LUGM! And I'm already looking forward to the next Corsair Hackers Reboot event ... Crossing fingers: Very soon and hopefully this year again :) Update: In the media The event had been announced in local media, too. L'Express: Salon informatique: Hacking Challenge à Flacq

  Read the article

• 7 Good Reasons to Upgrade E-Business Suite to the cloud

  - by Lisa Schwartz

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} As promised here is blog Part 2: Why Upgrade to Oracle E-Business Suite 12 in the cloud? 7 Good Reasons to Upgrade to E-Business Suite 12 in the Cloud: 1)   Take advantage of new and improved features: from global sub-ledger accounting to mobile access for supply chain management to built-in extensions for information search and discovery. If you haven’t checked out the latest features yet, there are over 1000 EBS 12 enhancements. 2) Plan now to address any ongoing Oracle Support considerations and regulatory compliance requirements. EBS Release 11 support is ending soon. Based upon that information alone, you should have an EBS upgrade strategy and planning well underway. 3) Customizations got you worried? Expedite your next Oracle E-Business Suite upgrade – have Oracle identify all customizations, reduce un-needed customizations (EBS 12 has built-in many of your customizations) and during the upgrade keep all necessary customizations to run your business. 4) Migrating EBS to the cloud allows parallel migration and testing. Therefore no extra hardware purchases for the testing and upgrade. Business disruption is minimized. And, by moving to the cloud, this provides for smoother future upgrades that are based on your own timeline. 5) Oracle Experts will upgrade and run your EBS applications for you in the cloud. Free your IT resources to develop new services and work on projects that are critical to business innovation and competitiveness. Your IT resources will not be inundated with upgrade tasks!      6) Reallocate precious IT dollars to other projects, eliminate CapEx costs. 7) Oracle minimizes business risk by having enterprise class cloud services under stringent SLAs designed to run your business applications for you such as: a. Enterprise grade infrastructure b. World-class security and identity management c. Best practices in regulatory compliance: from classified federal gov’t standards, to healthcare HIPPA standards to meeting Financial Services requirements (PCI DSS) Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 7 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Next Step: To help you upgrade and get to the cloud in the shortest period of  time, Oracle has a program called Oracle Upgrade Factory for Oracle E-Business Suite 12. It offers a unique approach, seamlessly bundling Managed Cloud Services and Oracle Consulting Services together for an entire Oracle E-Business Suite upgrade and migration to a managed private  cloud. Read the Oracle Upgrade Factory Solution Brief here. Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Best Practices - which domain types should be used to run applications

  - by jsavit

  This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (formerly named Logical Domains) One question that frequently comes up is "which types of domain should I use to run applications?" There used to be a simple answer in most cases: "only run applications in guest domains", but enhancements to T-series servers, Oracle VM Server for SPARC and the advent of SPARC SuperCluster have made this question more interesting and worth qualifying differently. This article reviews the relevant concepts and provides suggestions on where to deploy applications in a logical domains environment. Review: division of labor and types of domain Oracle VM Server for SPARC offloads many functions from the hypervisor to domains (also called virtual machines). This is a modern alternative to using a "thick" hypervisor that provides all virtualization functions, as in traditional VM designs, This permits a simpler hypervisor design, which enhances reliability, and security. It also reduces single points of failure by assigning responsibilities to multiple system components, which further improves reliability and security. In this architecture, management and I/O functionality are provided within domains. Oracle VM Server for SPARC does this by defining the following types of domain, each with their own roles: Control domain - management control point for the server, used to configure domains and manage resources. It is the first domain to boot on a power-up, is an I/O domain, and is usually a service domain as well. I/O domain - has been assigned physical I/O devices: a PCIe root complex, a PCI device, or a SR-IOV (single-root I/O Virtualization) function. It has native performance and functionality for the devices it owns, unmediated by any virtualization layer. Service domain - provides virtual network and disk devices to guest domains. Guest domain - a domain whose devices are all virtual rather than physical: virtual network and disk devices provided by one or more service domains. In common practice, this is where applications are run. Typical deployment A service domain is generally also an I/O domain: otherwise it wouldn't have access to physical device "backends" to offer to its clients. Similarly, an I/O domain is also typically a service domain in order to leverage the available PCI busses. Control domains must be I/O domains, because they boot up first on the server and require physical I/O. It's typical for the control domain to also be a service domain too so it doesn't "waste" the I/O resources it uses. A simple configuration consists of a control domain, which is also the one I/O and service domain, and some number of guest domains using virtual I/O. In production, customers typically use multiple domains with I/O and service roles to eliminate single points of failure: guest domains have virtual disk and virtual devices provisioned from more than one service domain, so failure of a service domain or I/O path or device doesn't result in an application outage. This is also used for "rolling upgrades" in which service domains are upgraded one at a time while their guests continue to operate without disruption. (It should be noted that resiliency to I/O device failures can also be provided by the single control domain, using multi-path I/O) In this type of deployment, control, I/O, and service domains are used for virtualization infrastructure, while applications run in guest domains. Changing application deployment patterns The above model has been widely and successfully used, but more configuration options are available now. Servers got bigger than the original T2000 class machines with 2 I/O busses, so there is more I/O capacity that can be used for applications. Increased T-series server capacity made it attractive to run more vertical applications, such as databases, with higher resource requirements than the "light" applications originally seen. This made it attractive to run applications in I/O domains so they could get bare-metal native I/O performance. This is leveraged by the SPARC SuperCluster engineered system, announced a year ago at Oracle OpenWorld. In SPARC SuperCluster, I/O domains are used for high performance applications, with native I/O performance for disk and network and optimized access to the Infiniband fabric. Another technical enhancement is the introduction of Direct I/O (DIO) and Single Root I/O Virtualization (SR-IOV), which make it possible to give domains direct connections and native I/O performance for selected I/O devices. A domain with either a DIO or SR-IOV device is an I/O domain. In summary: not all I/O domains own PCI complexes, and there are increasingly more I/O domains that are not service domains. They use their I/O connectivity for performance for their own applications. However, there are some limitations and considerations: at this time, a domain using physical I/O cannot be live-migrated to another server. There is also a need to plan for security and introducing unneeded dependencies: if an I/O domain is also a service domain providing virtual I/O go guests, it has the ability to affect the correct operation of its client guest domains. This is even more relevant for the control domain. where the ldm has to be protected from unauthorized (or even mistaken) use that would affect other domains. As a general rule, running applications in the service domain or the control domain should be avoided. To recap: Guest domains with virtual I/O still provide the greatest operational flexibility, including features like live migration. I/O domains can be used for applications with high performance requirements. This is used to great effect in SPARC SuperCluster and in general T4 deployments. Direct I/O (DIO) and Single Root I/O Virtualization (SR-IOV) make this more attractive by giving direct I/O access to more domains. Service domains should in general not be used for applications, because compromised security in the domain, or an outage, can affect other domains that depend on it. This concern can be mitigated by providing guests' their virtual I/O from more than one service domain, so an interruption of service in the service domain does not cause an application outage. The control domain should in general not be used to run applications, for the same reason. SPARC SuperCluster use the control domain for applications, but it is an exception: it's not a general purpose environment; it's an engineered system with specifically configured applications and optimization for optimal performance. These are recommended "best practices" based on conversations with a number of Oracle architects. Keep in mind that "one size does not fit all", so you should evaluate these practices in the context of your own requirements. Summary Higher capacity T-series servers have made it more attractive to use them for applications with high resource requirements. New deployment models permit native I/O performance for demanding applications by running them in I/O domains with direct access to their devices. This is leveraged in SPARC SuperCluster, and can be leveraged in T-series servers to provision high-performance applications running in domains. Carefully planned, this can be used to provide higher performance for critical applications.

  Read the article

• Translating Your Customizations

  - by Richard Bingham

  This blog post explains the basics of translating the customizations you can make to Fusion Applications products, with the inclusion of information for both composer-based customizations and the generic design-time customizations done via JDeveloper. Introduction Like most Oracle Applications, Fusion Applications installs on-premise with a US-English base language that is, in Release 7, supported by the option to add up to a total of 22 additional language packs (In Oracle Cloud production environments languages are pre-installed already). As such many organizations offer their users the option of working with their local language, and logically that should also apply for any customizations as well. Composer-based UI Customizations Customizations made in Page Composer take into consideration the session LOCALE, as set in the user preferences screen, during all customization work, and stores the customization in the MDS repository accordingly. As such the actual new or changed values used will only apply for the same language under which the customization was made, and text for any other languages requires a separate upload. See the Resource Bundles section below, which incidentally also applies to custom UI changes done in JDeveloper. You may have noticed this when you select the “Select Text Resource” menu option when editing the text on a page. Using this ensures that the resource bundles are used, whereas if you define a static value in Expression Builder it will never be available for translation. Notice in the screenshot below the “What’s New” custom value I have already defined using the ‘Select Text Resource’ feature is internally using the adfBundle groovy function to pull the custom value for my key (RT_S_1) from the ComposerOverrideBundle. Figure 1 – Page Composer showing the override bundle being used. Business Objects Customizing the Business Objects available in the Applications Composer tool for the CRM products, such as adding additional fields, also operates using the session language. Translating these additional values for these fields into other installed languages requires loading additional resource bundles, again as described below. Reports and Analytics Most customizations to Reports and BI Analytics are just essentially reorganizations and visualizations of existing number and text data from the system, and as such will use the appropriate values based on the users session language. Where a translated value or string exists for that session language, it will be used without the need for additional work. Extending through the addition of brand new reports and analytics requires another method of loading the translated strings, as part of what is known as ‘Localizing’ the BI Catalog and Metadata. This time it is via an export/import of XML data through the BI Administrators console, and is described in the OBIEE Admin Guide. Fusion Applications reports based on BI Publisher are already defined in template-per-locale, and in addition provide an extra process for getting the data for translation and reloading. This again uses the standard resource bundle format. Loading a custom report is illustrated in this video from our YouTube channel which shows the screen for both setting the template local and running an export for translation. Fusion Applications Menus Whilst the seeded Navigator and Global Menu values are fully translated when the additional language is installed, if they are customized then the change or new menu item will apply universally, not currently per language. This is set to change in a future release with the new UI Text Editor feature described below. More on Resource Bundles As mentioned above, to provide translations for most of your customizations you need to add values to a resource bundle. This is an industry open standard (OASIS) format XML file with the extension .xliff, and store translated values for the strings used by ADF at run-time. The general process is that these values are exported from the MDS repository, manually edited, and then imported back in again.This needs to be done by an administrator, via either WLST commands or through Enterprise Manager as per the screenshot below. This is detailed out in the Fusion Applications Extensibility Guide. For SaaS environments the Cloud Operations team can assist. Figure 2 – Enterprise Manager’s MDS export used getting resource bundles for manual translation and re-imported on the same screen. All customized strings are stored in an override bundle (xliff file) for each locale, suffixed with the language initials, with English ones being saved to the default. As such each language bundle can be easily identified and updated. Similarly if you used JDeveloper to create your own applications as extensions to Fusion Applications you would use the native support for resource bundles, and add them into the faces-config.xml file for inclusion in your application. An example is this ADF customization video from our YouTube channel. JDeveloper also supports automatic synchronization between your underlying resource bundles and any translatable strings you add – very handy. For more information see chapters on “Using Automatic Resource Bundle Integration in JDeveloper” and “Manually Defining Resource Bundles and Locales” in the Oracle Fusion Middleware Web User Interface Developer’s Guide for Oracle Application Development Framework. FND Messages and Look-ups FND Messages, as defined here, are not used for UI labels (they are known as ‘strings’), but are the responses back to users as a result of an action, such as from a page submit. Each ‘message’ is defined and stored in the related database table (FND_MESSAGES_B), with another (FND_MESSAGES_TL) holding any language-specific values. These come seeded with the additional language installs, however if you customize the messages via the “Manage Messages” task in Functional Setup Manager, or add new ones, then currently (in Release 7) you’ll need to repeat it for each language. Figure 3 – An FND Message defined in an English user session. Similarly Look-ups are stored in a translation table (FND_LOOKUP_VALUES_TL) where appropriate, and can be customized by setting the users session language and making the change  in the Setup and Maintenance task entitled “Manage [Standard|Common] Look-ups”. Online Help Yes, in fact all the seeded help is applied as part of each language pack install as part of the post-install provisioning process. If you are editing or adding custom online help then the Create Help screen provides a drop-down of which language your help customization will apply to. This is shown in the video below from our YouTube channel, and obviously you’ll need to it for each language in use. What is Coming for Translations? Currently planned for Release 8 is something called the User Interface (UI) Text Editor. This tool will allow the editing of all the text shown on the pages and forms of Fusion Application. This will provide a search based on a particular term or word, say “Worker”, and will allow it to be adjusted, say to “Employee”, which then updates all the Resource Bundles that contain it. In the case of multi-language environments, it will use the users session language (locale) to know which Resource Bundles to apply the change to. This capability will also support customization sandboxes, to help ensure changes can be tested and approved.  It is also interesting to note that the design currently allows any page-specific customizations done using Page Composer or Application Composer to over-write the global changes done via the UI Text Editor, allowing for special context-sensitive values to still be used. Further Reading and Resources The following short list provides the mains resources for digging into more detail on translation support for both Composer and JDeveloper customization projects. There is a dedicated chapter entitled “Translating Custom Text” in the Fusion Applications Extensibility Guide. This has good examples and steps for many tasks, especially administering resource bundles. Using localization formatting (numbers, dates etc) for design-time changes is well documented in the Fusion Applications Developer Guide. For more guidelines on general design-time globalization, see either the ‘Internationalizing and Localizing Pages’ chapter in the Oracle Fusion Middleware Web User Interface Developer’s Guide for Oracle Application Development Framework (Oracle Fusion Applications Edition) or the general Oracle Database Globalization Support Guide. The Oracle Architecture ‘A-Team’ provided a recent post on customizing the user session timeout popup, using design-time changes to resource bundles. It has detailed step-by-step examples which can be a useful illustration.

  Read the article

• Unable to connect to Wireless after installing Ubuntu 12.10

  - by Moulik

  I am using Asus U56E laptop and after installing Ubuntu 12.10 alongside Windows 8, I am unable to connect to the Wireless. I have been trying to solve this problem since two weeks and couldn't solve it. Please help. Any answer would be appreciated. Here are some command-line results. lspci -v | grep -iA 7 network ubuntu@ubuntu:~$ lspci -v | grep -iA 7 network 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 67) Subsystem: Intel Corporation Centrino Wireless-N + WiMAX 6150 BGN Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at de800000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi lsmod | grep iwlwifi ubuntu@ubuntu:~$ lsmod | grep iwlwifi iwlwifi 386826 0 mac80211 539908 1 iwlwifi cfg80211 206566 2 iwlwifi,mac80211 ubuntu@ubuntu:~$ dmesg | grep iwlwifi [ 57.846261] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 57.846264] iwlwifi: Copyright(c) 2003-2012 Intel Corporation [ 57.846336] iwlwifi 0000:02:00.0: >pci_resource_len = 0x00002000 [ 57.846338] iwlwifi 0000:02:00.0: >pci_resource_base = ffffc90000c7c000 [ 57.846341] iwlwifi 0000:02:00.0: >HW Revision ID = 0x67 [ 57.846438] iwlwifi 0000:02:00.0: >irq 52 for MSI/MSI-X [ 59.558335] iwlwifi 0000:02:00.0: >loaded firmware version 41.28.5.1 build 33926 [ 59.558514] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEBUG disabled [ 59.558516] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEBUGFS enabled [ 59.558517] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 59.558519] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 59.558520] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_P2P disabled [ 59.558522] iwlwifi 0000:02:00.0: >Detected Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN, REV=0x84 [ 59.558583] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 59.569083] iwlwifi 0000:02:00.0: >device EEPROM VER=0x557, CALIB=0x6 [ 59.569085] iwlwifi 0000:02:00.0: >Device SKU: 0x150 [ 59.569087] iwlwifi 0000:02:00.0: >Valid Tx ant: 0x1, Valid Rx ant: 0x3 [ 59.569100] iwlwifi 0000:02:00.0: >Tunable channels: 13 802.11bg, 0 802.11a channels [ 70.208469] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 70.208648] iwlwifi 0000:02:00.0: >Radio type=0x1-0x2-0x0 [ 70.366319] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 70.366470] iwlwifi 0000:02:00.0: >Radio type=0x1-0x2-0x0 sudo lshw -c network ubuntu@ubuntu:~$ sudo lshw -c network *-network description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 67 serial: 40:25:c2:84:99:c4 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.5.0-17-generic firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:52 memory:de800000-de801fff *-network description: Ethernet interface product: AR8151 v2.0 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 54:04:a6:2b:6a:ef capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:54 memory:dd400000-dd43ffff ioport:a000(size=128) ifconfig ubuntu@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 54:04:a6:2b:6a:ef UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:176 errors:0 dropped:0 overruns:0 frame:0 TX packets:176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14368 (14.3 KB) TX bytes:14368 (14.3 KB) wlan0 Link encap:Ethernet HWaddr 40:25:c2:84:99:c4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) iwconfig ubuntu@ubuntu:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off iwlist scan ubuntu@ubuntu:~$ iwlist scan eth0 Interface doesn't support scanning. lo Interface doesn't support scanning. wlan0 No scan results nm-tool ubuntu@ubuntu:~$ nm-tool NetworkManager Tool State: disconnected - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 54:04:A6:2B:6A:EF Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: disconnected Default: no HW Address: 40:25:C2:84:99:C4 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points hypeness2: Infra, 00:21:29:DA:08:4F, Freq 2462 MHz, Rate 54 Mb/s, Strength 42 WPA love: Infra, 68:7F:74:17:02:66, Freq 2412 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 DIRECT-MwSCX-3400Pamela: Infra, 02:15:99:A3:3F:AC, Freq 2412 MHz, Rate 54 Mb/s, Strength 22 WPA2 router: Infra, 1C:AF:F7:D6:76:F3, Freq 2417 MHz, Rate 54 Mb/s, Strength 20 WPA2 wing: Infra, E8:40:F2:34:E4:F7, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 132LINKSYS: Infra, 00:1A:70:80:1F:E9, Freq 2437 MHz, Rate 54 Mb/s, Strength 57 WEP VMITTAL: Infra, E0:46:9A:3C:F0:C4, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 WEP HP-Print-10-LaserJet 1025: Infra, 7C:E9:D3:7E:F8:10, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 ACNBB: Infra, 00:26:75:22:A6:2F, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 SATKAIVAL: Infra, 00:18:E7:CE:69:A6, Freq 2412 MHz, Rate 54 Mb/s, Strength 69 WPA WPA2 hypeness: Infra, B8:E6:25:24:C3:B1, Freq 2437 MHz, Rate 54 Mb/s, Strength 54 WPA WPA2 CSNetwork: Infra, BC:14:01:58:C5:88, Freq 2437 MHz, Rate 54 Mb/s, Strength 25 WPA WPA2 tharma: Infra, BC:14:01:E2:06:18, Freq 2412 MHz, Rate 54 Mb/s, Strength 15 WPA WPA2 Active2.4: Infra, 10:6F:3F:0E:F3:8E, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA WPA2 ACNBB: Infra, 00:26:75:58:4E:7A, Freq 2437 MHz, Rate 54 Mb/s, Strength 85 KO: Infra, BC:14:01:2E:AF:A8, Freq 2452 MHz, Rate 54 Mb/s, Strength 22 WPA WPA2 FEAR: Infra, 00:18:4D:C0:BC:58, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA Pamela: Infra, BC:14:01:52:F6:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 24 WPA WPA2 bvrk2: Infra, 78:CD:8E:7B:3C:79, Freq 2457 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 BELL030: Infra, D8:6C:E9:17:AF:09, Freq 2462 MHz, Rate 54 Mb/s, Strength 22 WPA2 Desai: Infra, 00:1D:7E:52:FB:C5, Freq 2437 MHz, Rate 54 Mb/s, Strength 14 WEP Sritharan: Infra, BC:14:01:E5:59:78, Freq 2462 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 PFN: Infra, 00:13:10:8B:CF:45, Freq 2437 MHz, Rate 54 Mb/s, Strength 19 WEP rfkill list all ubuntu@ubuntu:~$ rfkill list all 0: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wimax: WiMAX Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no so these are some more results sudo modprobe -r iwlwifi ubuntu@ubuntu:~$ sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1 ubuntu@ubuntu:~$ sudo modprobe iwlwifi 11n_disable=1 echo "blacklist asus_wmi" | sudo tee -a /etcmodprobe.d/blacklist.conf ubuntu@ubuntu:~$ echo "blacklist asus_wmi" | sudo tee -a /etc/modprobe.d/blacklist.conf blacklist asus_wmi echo "options iwlwifi 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf ubuntu@ubuntu:~$ echo "options iwlwifi 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf options iwlwifi 11n_disable=1 sudo modprobe -rfv iwlwifi ubuntu@ubuntu:~$ sudo modprobe -rfv iwlwifi rmmod /lib/modules/3.5.0-17-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko rmmod /lib/modules/3.5.0-17-generic/kernel/net/mac80211/mac80211.ko rmmod /lib/modules/3.5.0-17-generic/kernel/net/wireless/cfg80211.ko sudo modprobe -v iwlwifi ubuntu@ubuntu:~$ sudo modprobe -v iwlwifi insmod /lib/modules/3.5.0-17-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.5.0-17-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.5.0-17-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko 11n_disable=1

  Read the article

• PostSharp, Obfuscation, and IL

  - by simonc

  Aspect-oriented programming (AOP) is a relatively new programming paradigm. Originating at Xerox PARC in 1994, the paradigm was first made available for general-purpose development as an extension to Java in 2001. From there, it has quickly been adapted for use in all the common languages used today. In the .NET world, one of the primary AOP toolkits is PostSharp. Attributes and AOP Normally, attributes in .NET are entirely a metadata construct. Apart from a few special attributes in the .NET framework, they have no effect whatsoever on how a class or method executes within the CLR. Only by using reflection at runtime can you access any attributes declared on a type or type member. PostSharp changes this. By declaring a custom attribute that derives from PostSharp.Aspects.Aspect, applying it to types and type members, and running the resulting assembly through the PostSharp postprocessor, you can essentially declare 'clever' attributes that change the behaviour of whatever the aspect has been applied to at runtime. A simple example of this is logging. By declaring a TraceAttribute that derives from OnMethodBoundaryAspect, you can automatically log when a method has been executed: public class TraceAttribute : PostSharp.Aspects.OnMethodBoundaryAspect { public override void OnEntry(MethodExecutionArgs args) { MethodBase method = args.Method; System.Diagnostics.Trace.WriteLine( String.Format( "Entering {0}.{1}.", method.DeclaringType.FullName, method.Name)); } public override void OnExit(MethodExecutionArgs args) { MethodBase method = args.Method; System.Diagnostics.Trace.WriteLine( String.Format( "Leaving {0}.{1}.", method.DeclaringType.FullName, method.Name)); } } [Trace] public void MethodToLog() { ... } Now, whenever MethodToLog is executed, the aspect will automatically log entry and exit, without having to add the logging code to MethodToLog itself. PostSharp Performance Now this does introduce a performance overhead - as you can see, the aspect allows access to the MethodBase of the method the aspect has been applied to. If you were limited to C#, you would be forced to retrieve each MethodBase instance using Type.GetMethod(), matching on the method name and signature. This is slow. Fortunately, PostSharp is not limited to C#. It can use any instruction available in IL. And in IL, you can do some very neat things. Ldtoken C# allows you to get the Type object corresponding to a specific type name using the typeof operator: Type t = typeof(Random); The C# compiler compiles this operator to the following IL: ldtoken [mscorlib]System.Random call class [mscorlib]System.Type [mscorlib]System.Type::GetTypeFromHandle( valuetype [mscorlib]System.RuntimeTypeHandle) The ldtoken instruction obtains a special handle to a type called a RuntimeTypeHandle, and from that, the Type object can be obtained using GetTypeFromHandle. These are both relatively fast operations - no string lookup is required, only direct assembly and CLR constructs are used. However, a little-known feature is that ldtoken is not just limited to types; it can also get information on methods and fields, encapsulated in a RuntimeMethodHandle or RuntimeFieldHandle: // get a MethodBase for String.EndsWith(string) ldtoken method instance bool [mscorlib]System.String::EndsWith(string) call class [mscorlib]System.Reflection.MethodBase [mscorlib]System.Reflection.MethodBase::GetMethodFromHandle( valuetype [mscorlib]System.RuntimeMethodHandle) // get a FieldInfo for the String.Empty field ldtoken field string [mscorlib]System.String::Empty call class [mscorlib]System.Reflection.FieldInfo [mscorlib]System.Reflection.FieldInfo::GetFieldFromHandle( valuetype [mscorlib]System.RuntimeFieldHandle) These usages of ldtoken aren't usable from C# or VB, and aren't likely to be added anytime soon (Eric Lippert's done a blog post on the possibility of adding infoof, methodof or fieldof operators to C#). However, PostSharp deals directly with IL, and so can use ldtoken to get MethodBase objects quickly and cheaply, without having to resort to string lookups. The kicker However, there are problems. Because ldtoken for methods or fields isn't accessible from C# or VB, it hasn't been as well-tested as ldtoken for types. This has resulted in various obscure bugs in most versions of the CLR when dealing with ldtoken and methods, and specifically, generic methods and methods of generic types. This means that PostSharp was behaving incorrectly, or just plain crashing, when aspects were applied to methods that were generic in some way. So, PostSharp has to work around this. Without using the metadata tokens directly, the only way to get the MethodBase of generic methods is to use reflection: Type.GetMethod(), passing in the method name as a string along with information on the signature. Now, this works fine. It's slower than using ldtoken directly, but it works, and this only has to be done for generic methods. Unfortunately, this poses problems when the assembly is obfuscated. PostSharp and Obfuscation When using ldtoken, obfuscators don't affect how PostSharp operates. Because the ldtoken instruction directly references the type, method or field within the assembly, it is unaffected if the name of the object is changed by an obfuscator. However, the indirect loading used for generic methods was breaking, because that uses the name of the method when the assembly is put through the PostSharp postprocessor to lookup the MethodBase at runtime. If the name then changes, PostSharp can't find it anymore, and the assembly breaks. So, PostSharp needs to know about any changes an obfuscator does to an assembly. The way PostSharp does this is by adding another layer of indirection. When PostSharp obfuscation support is enabled, it includes an extra 'name table' resource in the assembly, consisting of a series of method & type names. When PostSharp needs to lookup a method using reflection, instead of encoding the method name directly, it looks up the method name at a fixed offset inside that name table: MethodBase genericMethod = typeof(ContainingClass).GetMethod(GetNameAtIndex(22)); PostSharp.NameTable resource: ... 20: get_Prop1 21: set_Prop1 22: DoFoo 23: GetWibble When the assembly is later processed by an obfuscator, the obfuscator can replace all the method and type names within the name table with their new name. That way, the reflection lookups performed by PostSharp will now use the new names, and everything will work as expected: MethodBase genericMethod = typeof(#kGy).GetMethod(GetNameAtIndex(22)); PostSharp.NameTable resource: ... 20: #kkA 21: #zAb 22: #EF5a 23: #2tg As you can see, this requires direct support by an obfuscator in order to perform these rewrites. Dotfuscator supports it, and now, starting with SmartAssembly 6.6.4, SmartAssembly does too. So, a relatively simple solution to a tricky problem, with some CLR bugs thrown in for good measure. You don't see those every day! Cross posted from Simple Talk.

  Read the article

• Slicing the EDG

  - by Antony Reynolds

  Different SOA Domain Configurations In this blog entry I would like to introduce three different configurations for a SOA environment.  I have omitted load balancers and OTD/OHS as they introduce a whole new round of discussion.  For each possible deployment architecture I have identified some of the advantages. Super Domain This is a single EDG style domain for everything needed for SOA/OSB.   It extends the standard EDG slightly but otherwise assumes a single “super” domain. This is basically the SOA EDG.  I have broken out JMS servers and Coherence servers to improve scalability and reduce dependencies. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if rest of domain is unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service. Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Benefits Single Administration Point (1 Admin Server) Closely follows EDG with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Drawbacks Patching is an all or nothing affair. Startup time for SOA may be slow if large number of composites deployed. Multiple Domains This extends the EDG into multiple domains, allowing separate management and update of these domains.  I see this type of configuration quite often with customers, although some don't have OWSM, others don't have separate Coherence etc. SOA & BAM are kept in the same domain as little benefit is obtained by separating them. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if other domains are unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service. Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Benefits Follows EDG but in separate domains and with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Patch lifecycle of OSB/SOA/JMS are no longer lock stepped. JMS may be kept running independently of other domains allowing applications to insert messages fro later consumption by SOA/OSB. OSB may be kept running independent of other domains, allowing service virtualization to continue independent of other domains availability. All domains use same OWSM policy store (MDS-WSM). Drawbacks Multiple domains to manage and configure. Multiple Admin servers (single view requires use of Grid Control) Multiple Admin servers/WSM clusters waste resources. Additional homes needed to enjoy benefits of separate patching. Cross domain trust needs setting up to simplify cross domain interactions. Startup time for SOA may be slow if large number of composites deployed. Shared Service Environment This model extends the previous multiple domain arrangement to provide a true shared service environment.This extends the previous model by allowing multiple additional SOA domains and/or other domains to take advantage of the shared services.  Only one non-shared domain is shown, but there could be multiple, allowing groups of applications to share patching independent of other application groups. Key Points Separate JMS allows those servers to be kept up separately from rest of SOA Domain, allowing JMS clients to post messages even if other domains are unavailable. JMS servers are only used to host application specific JMS destinations, SOA/OSB JMS destinations remain in relevant SOA/OSB managed servers. Separate Coherence servers allow OSB cache to be offloaded from OSB servers. Use of Coherence by other components as a shared infrastructure data grid service Coherence cluster may be managed by WLS but more likely run as a standalone Coherence cluster. Shared SOA Domain hosts Human Workflow Tasks BAM Common "utility" composites Single OSB domain provides "Enterprise Service Bus" All domains use same OWSM policy store (MDS-WSM) Benefits Follows EDG but in separate domains and with addition of application specific JMS servers and standalone Coherence servers for OSB caching and application specific caches. Coherence grid can be scaled independent of OSB/SOA. JMS queues provide for inter-application communication. Patch lifecycle of OSB/SOA/JMS are no longer lock stepped. JMS may be kept running independently of other domains allowing applications to insert messages fro later consumption by SOA/OSB. OSB may be kept running independent of other domains, allowing service virtualization to continue independent of other domains availability. All domains use same OWSM policy store (MDS-WSM). Supports large numbers of deployed composites in multiple domains. Single URL for Human Workflow end users. Single URL for BAM end users. Drawbacks Multiple domains to manage and configure. Multiple Admin servers (single view requires use of Grid Control) Multiple Admin servers/WSM clusters waste resources. Additional homes needed to enjoy benefits of separate patching. Cross domain trust needs setting up to simplify cross domain interactions. Human Workflow needs to be specially configured to point to shared services domain. Summary The alternatives in this blog allow for patching to have different impacts, depending on the model chosen.  Each organization must decide the tradeoffs for itself.  One extreme is to go for the shared services model and have one domain per SOA application.  This requires a lot of administration of the multiple domains.  The other extreme is to have a single super domain.  This makes the entire enterprise susceptible to an outage at the same time due to patching or other domain level changes.  Hopefully this blog will help your organization choose the right model for you.

  Read the article

• First PC Build (Part 1)

  - by Anthony Trudeau

  Originally posted on: http://geekswithblogs.net/tonyt/archive/2014/08/05/157959.aspxA couple of months ago I made the decision to build myself a new computer. The intended use is gaming and for using the last real version of Photoshop. I was motivated by the poor state of console gaming and a simple desire to do something I haven’t done before – build a PC from the ground up. I’ve been using PCs for more than two decades. I’ve replaced a component hear and there, but for the last 10 years or so I’ve only used laptops. Therefore, this article will be written from the perspective of someone familiar with PCs, but completely new at building. I’m not an expert and this is not a definitive guide for building a PC, but I do hope that it encourages you to try it yourself. Component List Research There was a lot of research necessary, because building a PC is completely new to me, and I haven’t kept up with what’s out there. The first thing you want to do is nail down what your goals are. Your goals are going to be driven by what you want to do with your computer and personal choice. Don’t neglect the second one, because if you’re doing this for fun you want to get what you want. In my case, I focused on three things: performance, longevity, and aesthetics. The performance aspect is important for gaming and Photoshop. This will drive what components you get. For example, heavy gaming use is going to drive your choice of graphics card. Longevity is relevant to me, because I don’t want to be changing things out anytime soon for the next hot game. The consequence of performance and longevity is cost. Finally, aesthetics was my next consideration. I could have just built a box, but it wouldn’t have been nearly as fun for me. Aesthetics might not be important to you. They are for me. I also like gadgets and that played into at least one purchase for this build. I used PC Part Picker to put together my component list. I found it invaluable during the process and I’d recommend it to everyone. One caveat is that I wouldn’t trust the compatibility aspects. It does a pretty good job of not steering you wrong, but do your own research. The rest of it isn’t really sexy. I started out with what appealed to me and then I made changes and additions as I dived deep into researching each component and interaction I could find. The resources I used are innumerable. I used reviews, product descriptions, forum posts (praises and problems), et al. to assist me. I also asked friends into gaming what they thought about my component list. And when I got near the end I posted my list to the Reddit /r/buildapc forum. I cannot stress the value of extra sets of eyeballs and first hand experiences. Some of the resources I used: PC Part Picker Tom’s Hardware bit-tech Reddit Purchase PC Part Picker favors certain vendors. You should look at others too. In my case I found their favorites to be the best. My priorities were out-the-door price and shipping time. I knew that once I started getting parts I’d want to start building. Luckily, I timed it well and everything arrived within the span of a few days. Here are my opinions on the vendors I ended up using in alphabetical order. Amazon.com is a good, reliable choice. They have excellent customer service in my experience, and I knew I wouldn’t have trouble with them. However, shipping time is often a problem when you use their free shipping unless you order expensive items (I’ve found items over $100 ship quickly). Ultimately though, price wasn’t always the best and their collection of sales tax in my state turned me off them. I did purchase my case from them. I ordered the mouse as well, but I cancelled after it was stuck four days in a “shipping soon” state. I purchased the mouse locally. Best Buy is not my favorite place to do business. There’s a lot of history with poor, uninterested sales representatives and they used to have a lot of bad anti-consumer policies. That’s a lot better now, but the bad taste is still in my mouth. I ended up purchasing the accessories from them including mouse (locally) and headphones. NCIX is a company that I’ve never heard of before. It popped up as a recommendation for my CPU cooler on PC Part Picker. I didn’t do a lot of research on the company, because their policy on you buying insurance for your orders turned me off. That policy makes it clear to me that the company finds me responsible for the shipment once it leaves their dock. That’s not right, and may run afoul of state laws. Regardless they shipped my CPU cooler quickly and I didn’t have a problem. NewEgg.com is a well known company. I had never done business with them, but I’m glad I did. They shipped quickly and provided good visibility over everything. The prices were also the best in most cases. My main complaint is that they have a lot of exchange only return policies on components. To their credit those policies are listed in the cart underneath each item. The visibility tells me that they’re not playing any shenanigans and made me comfortable dealing with that risk. The vast majority of what I ordered came from them. Coming Next In the next part I’ll tackle my build experience.

  Read the article

• Oracle Enterprise Manager 12c Ops Center Jump-Start for Partners

  - by Get_Specialized!

  Following the Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} announcement at Oracle OpenWorld Tokyo, Partners can check out these resources to further learn about Oracle Enterprise Manager 12c Op Center and then use it to optimize your solution/services or offer new ones: Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Product Documentation Oracle Technical Network Resources Online Learning Series for Partners in the OPN Enterprise Manager KnowledgeZone Whitepaper Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Making Infrastructure-as-a-Service in the Enterprise a Reality IDC report: Oracle Enterprise Manager 12c Embraces the Cloud with Integrated Lifecycle Management Follow-up webcast April 12th  Total Cloud Control for Systems Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle Enterprise Manager Ops Center 12c is no extra charge and included in the support contract of Oracle Systems customers.To learn more see the Ops Center Everywhere Program And if you're not already a member, be sure and join the Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle Enterprise Manager KnowledgeZone on the Oracle PartnerNetwork  Portal

  Read the article

• Wireless networks are not detected at start up in Ubuntu 12.04

  - by Kanhaiya Mishra

  I have recently (three four days ago) installed Ubuntu 12.04 via windows installer i.e. wubi.exe. After the installation completed wireless and Ethernet were both working well. But after restart wireless networks didn't show up while in the network manager both networking and wireless were enabled. Though sometimes after boot it did show the networks available but very rarely. So I went through various posts regarding wireless issues in Ubuntu 12.04 and tried so many things but ended up in nothing satisfactory. I have Broadcom 4313 LAN network controller and brcmsmac driver. Then relying on some suggestions I tried to install bcm-wl driver but couldn't install due to some error in jockeyl.log file. Then i tried fresh installation of the same driver but still could resolve the startup issues with wireless. Then again I reinstalled Ubuntu inside windows using wubi installer. This time again same problem occurred after boot. But this time I successfully installed wl driver before disturbing file-system files of Ubuntu. But again the same issue. This time I noticed some new things: If I inserted Ethernet/LAN cable before startup then wireless networks are available and of course LAN(wired) networks also work. but if i don't plug in cable before startup and then plug it after startup then it didn't detect Ethernet network neither wireless. So I haven't noticed it before that LAN along with wifi also doesn't work after startup. But if i suspend the session and make it sleep and again login then it worked. I tried it every time that WLAN worked perfectly. But still i m unable to resolve that startup problem. Each time i boot first I have to suspend it once then only networks are available. It irritates me each time i reboot/boot my lappy. So please help out of this problem. Any ideas/help regarding this issue would be highly appreciated. Some of the commands that i run gave following results: # lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) # sudo lshw -C network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 70:f1:a1:49:b6:ab width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.1.7 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: b8:ac:6f:6b:f7:4a capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) # lsmod | grep wl wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl # sudo iwlist eth1 scanning eth1 Scan completed : Cell 01 - Address: 30:46:9A:85:DA:9A ESSID:"BH DASHIR 2" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:4/5 Signal level:-60 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: DD7F0050F204104A00011010440001021041000100103B000103104700109AFE7D908F8E2D381860668BA2E8D8771021000D4E4554474541522C20496E632E10230009574752363134763130102400095747523631347631301042000538333235381054000800060050F204000110110009574752363134763130100800020084 Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: C0:3F:0E:EB:45:14 ESSID:"BH DASHIR 3" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-71 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: DD7F0050F204104A00011010440001021041000100103B00010310470010F3C9BBE499D140540F530E7EBEDE2F671021000D4E4554474541522C20496E632E10230009574752363134763130102400095747523631347631301042000538333235381054000800060050F204000110110009574752363134763130100800020084 Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 03 - Address: A0:21:B7:A8:2F:C0 ESSID:"BH DASHIR 4" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:1/5 Signal level:-86 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: DD8B0050F204104A0001101044000102103B0001031047001000000000000010000000A021B7A82FC01021000D4E6574676561722C20496E632E10230009574E523130303076321024000456324831104200046E6F6E651054000800060050F20400011011001B574E5231303030763228576972656C6573732041502D322E344729100800020086103C000103 Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s

  Read the article

• Ubuntu 12.04 + Wifi not working

  - by user171154

  i'm having problems connecting over wireless. At the moment, I'm using wicd. It seems to get stuck on "Verifying AP association...". Without wicd I can get the connection up and ping the Net - but if I take eth0 down (ifconfig eth0 down), my wireless goes away too (same result if I unplug the wire instead). wicd is the only way I can bring eth0 back (which is the main reason I'm using it) - ifconfig eth0 and/or ifup eth0 do not re-enable the connection (I just discovered it leaves out the gateway. Adding the gateway back in re-enables the connection including wifi; I didn't want to delete the info about wicd above in case it gives someone an idea.) Doing it manually, despite the errors (which it would be nice to also resolve) - allows me to ping the outside world: ifup wlan0 ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument ssh stop/waiting ssh start/running, process 17336 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=43 time=48.8 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=43 time=47.9 ms 64 bytes from 8.8.8.8: icmp_req=3 ttl=43 time=48.7 ms 64 bytes from 8.8.8.8: icmp_req=4 ttl=43 time=53.2 ms --- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 47.975/49.711/53.235/2.063 ms # iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TPLINK" Mode:Managed Frequency:2.427 GHz Access Point: 64:66:xx:xx:xx:22 Bit Rate=108 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: f0:7d:68:c1:b4:13 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-67-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:dfbf0000-dfbfffff ip route default via 192.168.0.1 dev eth0 default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 (For the record, I have no idea what the 169.254.0.0 address is doing there.) uname -a 3.2.0-67-generic-pae #101-Ubuntu SMP Tue Jul 15 18:04:54 UTC 2014 i686 i686 i386 GNU/Linux lshw -C network *-network description: Ethernet interface product: NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 01 serial: 00:11:11:59:fc:09 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5751-v3.23a ip=192.168.0.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:dfcf0000-dfcfffff *-network description: Wireless interface product: AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) vendor: Qualcomm Atheros physical id: 0 /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback source /etc/network/interfaces.eth0 source /etc/network/interfaces.wlan0 /etc/network/interfaces.eth0 #Main Interface auto eth0 iface eth0 inet static address 192.168.0.102 netmask 255.255.255.0 gateway 192.168.0.1 /etc/network/interfaces.wlan0 auto wlan0 iface wlan0 inet static address 192.168.0.12 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 netmask 255.255.255.0 wpa-driver wext wpa-ssid TPLINK wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk dca1badb5fd4e9axxx4xxdaaxxfa91xx610bxx6a7d57ef67af9809dxx6af42e39 /etc/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant network={ ssid="TPLINK" psk="my password" key_mgmt=WPA-PSK proto=RSN pairwise=CCMP group=CCMP } ifdown eth0 ifdown: interface eth0 not configured ifconfig eth0 Link encap:Ethernet HWaddr 00:11:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:213690 errors:0 dropped:0 overruns:0 frame:0 TX packets:155266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:220057808 (220.0 MB) TX bytes:21137696 (21.1 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196412 errors:0 dropped:0 overruns:0 frame:0 TX packets:196412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270697 (153.2 MB) TX bytes:153270697 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11335 errors:0 dropped:0 overruns:0 frame:0 TX packets:7287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2563290 (2.5 MB) TX bytes:855746 (855.7 KB) ifconfig eth0 down ifconfig eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:192 (192.0 B) TX bytes:94 (94.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196418 errors:0 dropped:0 overruns:0 frame:0 TX packets:196418 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270871 (153.2 MB) TX bytes:153270871 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11359 errors:0 dropped:0 overruns:0 frame:0 TX packets:7293 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2565482 (2.5 MB) TX bytes:856363 (856.3 KB) ip route default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. --- 8.8.8.8 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3024ms ping -I eth0 -c 3 router PING router (192.168.0.1) from 192.168.0.102 eth0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2015ms ping -I wlan0 -c 3 router PING router (192.168.0.1) from 192.168.0.12 wlan0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms Let me know if you need more info. Thank you in advance.

  Read the article

• Super constructor must be a first statement in Java constructor [closed]

  - by Val

  I know the answer: "we need rules to prevent shooting into your own foot". Ok, I make millions of programming mistakes every day. To be prevented, we need one simple rule: prohibit all JLS and do not use Java. If we explain everything by "not shooting your foot", this is reasonable. But there is not much reason is such reason. When I programmed in Delphy, I always wanted the compiler to check me if I read uninitializable. I have discovered myself that is is stupid to read uncertain variable because it leads unpredictable result and is errorenous obviously. By just looking at the code I could see if there is an error. I wished if compiler could do this job. It is also a reliable signal of programming error if function does not return any value. But I never wanted it do enforce me the super constructor first. Why? You say that constructors just initialize fields. Super fields are derived; extra fields are introduced. From the goal point of view, it does not matter in which order you initialize the variables. I have studied parallel architectures and can say that all the fields can even be assigned in parallel... What? Do you want to use the unitialized fields? Stupid people always want to take away our freedoms and break the JLS rules the God gives to us! Please, policeman, take away that person! Where do I say so? I'm just saying only about initializing/assigning, not using the fields. Java compiler already defends me from the mistake of accessing notinitialized. Some cases sneak but this example shows how this stupid rule does not save us from the read-accessing incompletely initialized in construction: public class BadSuper { String field; public String toString() { return "field = " + field; } public BadSuper(String val) { field = val; // yea, superfirst does not protect from accessing // inconstructed subclass fields. Subclass constr // must be called before super()! System.err.println(this); } } public class BadPost extends BadSuper { Object o; public BadPost(Object o) { super("str"); this. o = o; } public String toString() { // superconstructor will boom here, because o is not initialized! return super.toString() + ", obj = " + o.toString(); } public static void main(String[] args) { new BadSuper("test 1"); new BadPost(new Object()); } } It shows that actually, subfields have to be inilialized before the supreclass! Meantime, java requirement "saves" us from writing specializing the class by specializing what the super constructor argument is, public class MyKryo extends Kryo { class MyClassResolver extends DefaultClassResolver { public Registration register(Registration registration) { System.out.println(MyKryo.this.getDepth()); return super.register(registration); } } MyKryo() { // cannot instantiate MyClassResolver in super super(new MyClassResolver(), new MapReferenceResolver()); } } Try to make it compilable. It is always pain. Especially, when you cannot assign the argument later. Initialization order is not important for initialization in general. I could understand that you should not use super methods before initializing super. But, the requirement for super to be the first statement is different. It only saves you from the code that does useful things simply. I do not see how this adds safety. Actually, safety is degraded because we need to use ugly workarounds. Doing post-initialization, outside the constructors also degrades safety (otherwise, why do we need constructors?) and defeats the java final safety reenforcer. To conclude Reading not initialized is a bug. Initialization order is not important from the computer science point of view. Doing initalization or computations in different order is not a bug. Reenforcing read-access to not initialized is good but compilers fail to detect all such bugs Making super the first does not solve the problem as it "Prevents" shooting into right things but not into the foot It requires to invent workarounds, where, because of complexity of analysis, it is easier to shoot into the foot doing post-initialization outside the constructors degrades safety (otherwise, why do we need constructors?) and that degrade safety by defeating final access modifier When there was java forum alive, java bigots attecked me for these thoughts. Particularly, they dislaked that fields can be initialized in parallel, saying that natural development ensures correctness. When I replied that you could use an advanced engineering to create a human right away, without "developing" any ape first, and it still be an ape, they stopped to listen me. Cos modern technology cannot afford it. Ok, Take something simpler. How do you produce a Renault? Should you construct an Automobile first? No, you start by producing a Renault and, once completed, you'll see that this is an automobile. So, the requirement to produce fields in "natural order" is unnatural. In case of alarmclock or armchair, which are still chair and clock, you may need first develop the base (clock and chair) and then add extra. So, I can have examples where superfields must be initialized first and, oppositely, when they need to be initialized later. The order does not exist in advance. So, the compiler cannot be aware of the proper order. Only programmer/constructor knows is. Compiler should not take more responsibility and enforce the wrong order onto programmer. Saying that I cannot initialize some fields because I did not ininialized the others is like "you cannot initialize the thing because it is not initialized". This is a kind of argument we have. So, to conclude once more, the feature that "protects" me from doing things in simple and right way in order to enforce something that does not add noticeably to the bug elimination at that is a strongly negative thing and it pisses me off, altogether with the all the arguments to support it I've seen so far. It is "a conceptual question about software development" Should there be the requirement to call super() first or not. I do not know. If you do or have an idea, you have place to answer. I think that I have provided enough arguments against this feature. Lets appreciate the ones who benefit form it. Let it just be something more than simple abstract and stupid "write your own language" or "protection" kind of argument. Why do we need it in the language that I am going to develop?

  Read the article

• Beyond Cloud Technology, Enabling A More Agile and Responsive Organization

  - by sxkumar

  This is the second part of the blog “Clouds, Clouds Everywhere But not a Drop of Rain”. In the first part,  I was sharing with you how a broad-based transformation makes cloud more than a technology initiative, I will describe in this section how it requires people (organizational) and process changes as well, and these changes are as critical as is the choice of right tools and technology. People: Most IT organizations have a fairly complex organizational structure. There are different groups, managing different pieces of the puzzle, and yet, they don't always work together. Provisioning a new application therefore may require a request to float endlessly through system administrators, DBAs and middleware admin worlds – resulting in long delays and constant finger pointing.  Cloud users expect end-to-end automation - which requires these silos to be greatly simplified, if not completely eliminated.  Most customers I talk to acknowledge this problem but are quick to admit that such a transformation is hard. As hard as it may be, I am afraid that the status quo is no longer an option. Sticking to an organizational structure that was created ages back will not only impede cloud adoption,  it also risks making the IT skills increasingly irrelevant in a world that is rapidly moving towards converged applications and infrastructure.   Process: Most IT organizations today operate with a mindset that they must fully "control" access to any and all types of IT services. This in turn leads to people clinging on to outdated manual approval processes .  While requiring approvals for scarce resources makes sense, insisting that every single request must be manually approved defeats the very purpose of cloud. Not only this causes delays, thereby at least partially negating the agility benefits, it also results in gross inefficiency. In a cloud environment, self-service access should be governed by policies, quotas that the administrators can define upfront . For a cloud initiative to be successful, IT organizations MUST be ready to empower users by giving them real control rather than insisting on brokering every single interaction between users and the cloud resources. Technology: From a technology perspective, cloud is about consolidation, standardization and automation. A consolidated and standardized infrastructure helps increase utilization and reduces cost. Additionally, it  enables a much higher degree of automation - thereby providing users the required agility while minimizing operational costs.  Obviously, automation is the key to cloud. Unfortunately it hasn’t received as much attention within enterprises as it should have.  Many organizations are just now waking up to the criticality of automation and it still often gets relegated to back burner in favor of other "high priority" projects. However, it is important to understand that without the right type and level of automation, cloud will remain a distant dream for most enterprises. This in turn makes the choice of the cloud management software extremely critical.  For a cloud management software to be effective in an enterprise environment, it must meet the following qualifications: Broad and Deep Solution It should offer a broad and deep solution to enable the kind of broad-based transformation we are talking about.  Its footprint must cover physical and virtual systems, as well as infrastructure, database and application tiers. Too many enterprises choose to equate cloud with virtualization. While virtualization is a critical component of a cloud solution, it is just a component and not the whole solution. Similarly, too many people tend to equate cloud with Infrastructure-as-a-Service (IaaS). While it is perfectly reasonable to treat IaaS as a starting point, it is important to realize that it is just the first stepping stone - and on its own it can only provide limited business benefits. It is actually the higher level services, such as (application) platform and business applications, that will bring about a more meaningful transformation to your enterprise. Run and Manage Efficiently Your Mission Critical Applications It should not only be able to run your mission critical applications, it should do so better than before.  For enterprises, applications and data are the critical business assets  As such, if you are building a cloud platform that cannot run your ERP application, it isn't truly a "enterprise cloud".  Also, be wary of  vendors who try to sell you the idea that your applications must be written in a certain way to be able to run on the cloud. That is nothing but a bogus, self-serving argument. For the cloud to be meaningful to enterprises, it should adopt to your applications - and not the other way around.  Automated, Integrated Set of Cloud Management Capabilities At the root of many of the problems plaguing enterprise IT today is complexity. A complex maze of tools and technology, coupled with archaic  processes, results in an environment which is inflexible, inefficient and simply too hard to manage. Management tool consolidation, therefore, is key to the success of your cloud as tool proliferation adds to complexity, encourages compartmentalization and defeats the very purpose that you are building the cloud for. Decision makers ought to be extra cautious about vendors trying to sell them a "suite" of disparate and loosely integrated products as a cloud solution.  An effective enterprise cloud management solution needs to provide a tightly integrated set of capabilities for all aspects of cloud lifecycle management. A simple question to ask: will your environment be more or less complex after you implement your cloud? More often than not, the answer will surprise you.  At Oracle, we have understood these challenges and have been working hard to create cloud solutions that are relevant and meaningful for enterprises.  And we have been doing it for much longer than you may think. Oracle was one of the very first enterprise software companies to make our products available on the Amazon Cloud. As far back as in 2007, we created new cloud solutions such as Cloud Database Backup that are helping customers like Amazon save millions every year.  Our cloud solution portfolio is also the broadest and most deep in the industry  - covering public, private, hybrid, Infrastructure, platform and applications clouds. It is no coincidence therefore that the Oracle Cloud today offers the most comprehensive set of public cloud services in the industry.  And to a large part, this has been made possible thanks to our years on investment in creating cloud enabling technologies. I will dedicated the third and final part of the blog “Clouds, Clouds Everywhere But not a Drop of Rain” to Oracle Cloud Technologies Building Blocks and how they mapped into our vision of Enterprise Cloud. Stay Tuned.

  Read the article

• Winform/Program and how to write array information to linklabels?!!?

  - by JB

  So my program works like this: using winforms, user enters ID number, using an array, based on the right id number, that student information and class schedule outputs in a message box! My question is how to take the 4 classes in the message box/array and write them to the linklabel text in form 2???? My Getschedule class contains the array and is listed below: namespace Eagle_Eye_Class_Finder { public class GetSchedule { IDnumber[] IDnumbers = new IDnumber[3]; public string GetDataFromNumber(string ID) { foreach (IDnumber IDCandidateMatch in IDnumbers) { if (IDCandidateMatch.ID == ID) { StringBuilder myData = new StringBuilder(); myData.AppendLine(IDCandidateMatch.Name); myData.AppendLine(": "); myData.AppendLine(IDCandidateMatch.ID); myData.AppendLine(IDCandidateMatch.year); myData.AppendLine(IDCandidateMatch.class1); myData.AppendLine(IDCandidateMatch.class2); myData.AppendLine(IDCandidateMatch.class3); myData.AppendLine(IDCandidateMatch.class4); //return myData; return myData.ToString(); } } return ""; } public GetSchedule() { IDnumbers[0] = new IDnumber() { Name = "Joshua Banks", ID = "900456317", year = "Senior", class1 = "TEET 4090", class2 = "TEET 3020", class3 = "TEET 3090", class4 = "TEET 4290" }; IDnumbers[1] = new IDnumber() { Name = "Sean Ward", ID = "900456318", year = "Junior", class1 = "ENGNR 4090", class2 = "ENGNR 3020", class3 = "ENGNR 3090", class4 = "ENGNR 4290" }; IDnumbers[2] = new IDnumber() { Name = "Terrell Johnson", ID = "900456319", year = "Sophomore", class1 = "BUS 4090", class2 = "BUS 3020", class3 = "BUS 3090", class4 = "BUS 4290" }; } public class IDnumber { public string Name { get; set; } public string ID { get; set; } public string year { get; set; } public string class1 { get; set; } public string class2 { get; set; } public string class3 { get; set; } public string class4 { get; set; } public static void ProcessNumber(IDnumber myNum) { StringBuilder myData = new StringBuilder(); myData.AppendLine(myNum.Name); myData.AppendLine(": "); myData.AppendLine(myNum.ID); myData.AppendLine(myNum.year); myData.AppendLine(myNum.class1); myData.AppendLine(myNum.class2); myData.AppendLine(myNum.class3); myData.AppendLine(myNum.class4); MessageBox.Show(myData.ToString()); } } } } My form 2 which will contain the linklabels is listed below: public class YOURCLASSSCHEDULE : System.Windows.Forms.Form { public System.Windows.Forms.LinkLabel linkLabel1; public System.Windows.Forms.LinkLabel linkLabel2; public System.Windows.Forms.LinkLabel linkLabel3; public System.Windows.Forms.LinkLabel linkLabel4; private Button button1; /// Required designer variable. public System.ComponentModel.Container components = null; public YOURCLASSSCHEDULE() { // InitializeComponent(); // TODO: Add any constructor code after InitializeComponent call } /// Clean up any resources being used. protected override void Dispose(bool disposing) { if (disposing) { if (components != null) { components.Dispose(); } } base.Dispose(disposing); } #region Windows Form Designer generated code /// <summary> /// Required method for Designer support - do not modify /// the contents of this method with the code editor. /// </summary> private void InitializeComponent() { System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(YOURCLASSSCHEDULE)); this.linkLabel1 = new System.Windows.Forms.LinkLabel(); this.linkLabel2 = new System.Windows.Forms.LinkLabel(); this.linkLabel3 = new System.Windows.Forms.LinkLabel(); this.linkLabel4 = new System.Windows.Forms.LinkLabel(); this.button1 = new System.Windows.Forms.Button(); this.SuspendLayout(); // // linkLabel1 // this.linkLabel1.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel1.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel1.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel1.LinkArea = new System.Windows.Forms.LinkArea(0, 7); this.linkLabel1.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel1.Location = new System.Drawing.Point(41, 123); this.linkLabel1.Name = "linkLabel1"; this.linkLabel1.Size = new System.Drawing.Size(288, 32); this.linkLabel1.TabIndex = 1; this.linkLabel1.TabStop = true; this.linkLabel1.Text = "Class 1"; this.linkLabel1.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel1.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel1_LinkClicked); // // linkLabel2 // this.linkLabel2.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel2.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel2.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel2.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel2.Location = new System.Drawing.Point(467, 123); this.linkLabel2.Name = "linkLabel2"; this.linkLabel2.Size = new System.Drawing.Size(288, 32); this.linkLabel2.TabIndex = 2; this.linkLabel2.TabStop = true; this.linkLabel2.Text = "Class 2"; this.linkLabel2.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel2.VisitedLinkColor = System.Drawing.Color.Navy; this.linkLabel2.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel2_LinkClicked); // // linkLabel3 // this.linkLabel3.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel3.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel3.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel3.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel3.Location = new System.Drawing.Point(41, 311); this.linkLabel3.Name = "linkLabel3"; this.linkLabel3.Size = new System.Drawing.Size(288, 32); this.linkLabel3.TabIndex = 3; this.linkLabel3.TabStop = true; this.linkLabel3.Text = "Class 3"; this.linkLabel3.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel3.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel3_LinkClicked); // // linkLabel4 // this.linkLabel4.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel4.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel4.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel4.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel4.Location = new System.Drawing.Point(467, 311); this.linkLabel4.Name = "linkLabel4"; this.linkLabel4.Size = new System.Drawing.Size(288, 32); this.linkLabel4.TabIndex = 4; this.linkLabel4.TabStop = true; this.linkLabel4.Text = "Class 4"; this.linkLabel4.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel4.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel4_LinkClicked); // // this.AutoScaleBaseSize = new System.Drawing.Size(6, 15); this.BackgroundImage = ((System.Drawing.Image)(resources.GetObject("$this.BackgroundImage"))); this.BackgroundImageLayout = System.Windows.Forms.ImageLayout.Stretch; this.ClientSize = new System.Drawing.Size(790, 482); this.Controls.Add(this.button1); this.Controls.Add(this.linkLabel4); this.Controls.Add(this.linkLabel3); this.Controls.Add(this.linkLabel2); this.Controls.Add(this.linkLabel1); this.Font = new System.Drawing.Font("OldDreadfulNo7 BT", 8.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.Name = "YOURCLASSSCHEDULE"; this.Text = "Your Classes"; this.Load += new System.EventHandler(this.Form2_Load); this.ResumeLayout(false); } #endregion public void Form2_Load(object sender, System.EventArgs e) { // if (text == "900456317") // { //} } public void linkLabel1_LinkClicked(object sender, System.Windows.Forms.LinkLabelLinkClickedEventArgs e) { System.Diagnostics.Process.Start("http://www.georgiasouthern.edu/map/"); } private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { } private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { } private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { } private void button1_Click(object sender, EventArgs e) { Form1 form1 = new Form1(); form1.Show(); this.Hide(); } } }

  Read the article

• Winform/Program and how to write class 1, class 2, class 3, class 4 in array to linklabels?!!?

  - by JB

  So my program works like this: using winforms, user enters ID number, using an array, based on the right id number, that student information and class schedule outputs in a message box! My question is how to take the 4 classes in the message box/array and write them to the linklabel text in form 2???? My Getschedule class contains the array and is listed below: namespace Eagle_Eye_Class_Finder { public class GetSchedule { IDnumber[] IDnumbers = new IDnumber[3]; public string GetDataFromNumber(string ID) { foreach (IDnumber IDCandidateMatch in IDnumbers) { if (IDCandidateMatch.ID == ID) { StringBuilder myData = new StringBuilder(); myData.AppendLine(IDCandidateMatch.Name); myData.AppendLine(": "); myData.AppendLine(IDCandidateMatch.ID); myData.AppendLine(IDCandidateMatch.year); myData.AppendLine(IDCandidateMatch.class1); myData.AppendLine(IDCandidateMatch.class2); myData.AppendLine(IDCandidateMatch.class3); myData.AppendLine(IDCandidateMatch.class4); //return myData; return myData.ToString(); } } return ""; } public GetSchedule() { IDnumbers[0] = new IDnumber() { Name = "Joshua Banks", ID = "900456317", year = "Senior", class1 = "TEET 4090", class2 = "TEET 3020", class3 = "TEET 3090", class4 = "TEET 4290" }; IDnumbers[1] = new IDnumber() { Name = "Sean Ward", ID = "900456318", year = "Junior", class1 = "ENGNR 4090", class2 = "ENGNR 3020", class3 = "ENGNR 3090", class4 = "ENGNR 4290" }; IDnumbers[2] = new IDnumber() { Name = "Terrell Johnson", ID = "900456319", year = "Sophomore", class1 = "BUS 4090", class2 = "BUS 3020", class3 = "BUS 3090", class4 = "BUS 4290" }; } public class IDnumber { public string Name { get; set; } public string ID { get; set; } public string year { get; set; } public string class1 { get; set; } public string class2 { get; set; } public string class3 { get; set; } public string class4 { get; set; } public static void ProcessNumber(IDnumber myNum) { StringBuilder myData = new StringBuilder(); myData.AppendLine(myNum.Name); myData.AppendLine(": "); myData.AppendLine(myNum.ID); myData.AppendLine(myNum.year); myData.AppendLine(myNum.class1); myData.AppendLine(myNum.class2); myData.AppendLine(myNum.class3); myData.AppendLine(myNum.class4); MessageBox.Show(myData.ToString()); } } } } My form 2 which will contain the linklabels is listed below: public class YOURCLASSSCHEDULE : System.Windows.Forms.Form { public System.Windows.Forms.LinkLabel linkLabel1; public System.Windows.Forms.LinkLabel linkLabel2; public System.Windows.Forms.LinkLabel linkLabel3; public System.Windows.Forms.LinkLabel linkLabel4; private Button button1; /// Required designer variable. public System.ComponentModel.Container components = null; public YOURCLASSSCHEDULE() { // InitializeComponent(); // TODO: Add any constructor code after InitializeComponent call } /// Clean up any resources being used. protected override void Dispose(bool disposing) { if (disposing) { if (components != null) { components.Dispose(); } } base.Dispose(disposing); } #region Windows Form Designer generated code /// <summary> /// Required method for Designer support - do not modify /// the contents of this method with the code editor. /// </summary> private void InitializeComponent() { System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(YOURCLASSSCHEDULE)); this.linkLabel1 = new System.Windows.Forms.LinkLabel(); this.linkLabel2 = new System.Windows.Forms.LinkLabel(); this.linkLabel3 = new System.Windows.Forms.LinkLabel(); this.linkLabel4 = new System.Windows.Forms.LinkLabel(); this.button1 = new System.Windows.Forms.Button(); this.SuspendLayout(); // // linkLabel1 // this.linkLabel1.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel1.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel1.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel1.LinkArea = new System.Windows.Forms.LinkArea(0, 7); this.linkLabel1.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel1.Location = new System.Drawing.Point(41, 123); this.linkLabel1.Name = "linkLabel1"; this.linkLabel1.Size = new System.Drawing.Size(288, 32); this.linkLabel1.TabIndex = 1; this.linkLabel1.TabStop = true; this.linkLabel1.Text = "Class 1"; this.linkLabel1.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel1.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel1_LinkClicked); // // linkLabel2 // this.linkLabel2.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel2.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel2.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel2.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel2.Location = new System.Drawing.Point(467, 123); this.linkLabel2.Name = "linkLabel2"; this.linkLabel2.Size = new System.Drawing.Size(288, 32); this.linkLabel2.TabIndex = 2; this.linkLabel2.TabStop = true; this.linkLabel2.Text = "Class 2"; this.linkLabel2.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel2.VisitedLinkColor = System.Drawing.Color.Navy; this.linkLabel2.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel2_LinkClicked); // // linkLabel3 // this.linkLabel3.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel3.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel3.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel3.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel3.Location = new System.Drawing.Point(41, 311); this.linkLabel3.Name = "linkLabel3"; this.linkLabel3.Size = new System.Drawing.Size(288, 32); this.linkLabel3.TabIndex = 3; this.linkLabel3.TabStop = true; this.linkLabel3.Text = "Class 3"; this.linkLabel3.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel3.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel3_LinkClicked); // // linkLabel4 // this.linkLabel4.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel4.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel4.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel4.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel4.Location = new System.Drawing.Point(467, 311); this.linkLabel4.Name = "linkLabel4"; this.linkLabel4.Size = new System.Drawing.Size(288, 32); this.linkLabel4.TabIndex = 4; this.linkLabel4.TabStop = true; this.linkLabel4.Text = "Class 4"; this.linkLabel4.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel4.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel4_LinkClicked); // // this.AutoScaleBaseSize = new System.Drawing.Size(6, 15); this.BackgroundImage = ((System.Drawing.Image)(resources.GetObject("$this.BackgroundImage"))); this.BackgroundImageLayout = System.Windows.Forms.ImageLayout.Stretch; this.ClientSize = new System.Drawing.Size(790, 482); this.Controls.Add(this.button1); this.Controls.Add(this.linkLabel4); this.Controls.Add(this.linkLabel3); this.Controls.Add(this.linkLabel2); this.Controls.Add(this.linkLabel1); this.Font = new System.Drawing.Font("OldDreadfulNo7 BT", 8.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.Name = "YOURCLASSSCHEDULE"; this.Text = "Your Classes"; this.Load += new System.EventHandler(this.Form2_Load); this.ResumeLayout(false); } #endregion public void Form2_Load(object sender, System.EventArgs e) { // if (text == "900456317") // { //} } public void linkLabel1_LinkClicked(object sender, System.Windows.Forms.LinkLabelLinkClickedEventArgs e) { System.Diagnostics.Process.Start("http://www.georgiasouthern.edu/map/"); } private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { } private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { } private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { } private void button1_Click(object sender, EventArgs e) { Form1 form1 = new Form1(); form1.Show(); this.Hide(); } } }

  Read the article

• Cannot log to Proxmox GUI

  - by greg

  I'm running proxmox on debian 6.0.8 kernel 2.6.32-18-pve. When I try to log into the GUI with the root password, it lets me in for about 2 seconds then asks for the password again: <hostname>:8006/api2/json/cluster/resources 401 (permission denied - invalid ticket) This is not the same behavior as when I give an incorrect password. I suspect a hostname problem, but I can't sort it out. My /etc/hosts contains the following line: <ip> <shorthostname> <longhostname> pvelocalhost The folder /etc/pve/nodes contains a folder name The https certificates matches the hostname. Any idea? TIA greg

  Read the article

• Cannot disable spotlight indexing on volume

  - by jayhendren

  I have a FAT32 partition on my HDD. When using OSX, it is mounted to /Volumes/MEDIA. After a recent upgrade to Mavericks, spotlight is having trouble indexing it, eating up almost all of my system resources, and I cannot get the indexing to stop: [jay-mba-osx ~]% sudo mdutil -v -a -i off /: Indexing disabled. [jay-mba-osx ~]% sudo mdutil -v -V /Volumes/MEDIA -i off [jay-mba-osx ~]% mdutil -v -a -s /: Indexing disabled. /Volumes/BOOTCAMP: Indexing disabled. /Volumes/MEDIA: Indexing enabled. [jay-mba-osx ~]% [jay-mba-osx ~]% sudo mdutil -v -V /Volumes/MEDIA -E /Volumes/MEDIA: Indexing enabled. [jay-mba-osx ~]% sudo mdutil -v -V /Volumes/MEDIA -i off [jay-mba-osx ~]% mdutil -v -a -s /: Indexing disabled. /Volumes/BOOTCAMP: Indexing disabled. /Volumes/MEDIA: Indexing enabled. [jay-mba-osx ~]% How to I tell spotlight to "cease and desist" on my MEDIA volume? I only want or need spotlight indexing on my OSX partition.

  Read the article

• SonicPoint AP Clients Not Able To Connect With DHCP

  - by Mike Keller

  This is my first time setting up anything like this so please be gentle. I'm a web developer who fell into setting up a few SonicWall NSA 4200's... I've tried doing as much research on this through Google and ServerFault but haven't been able to hunt down an answer as to what I'm doing wrong. We've got two virtual access points set up here, one that is intended for employees (tied to X2) and the other for guests (tied to X2:V1). We are not using the DHCP server on the NSA 4200, but one already on the network. When a client connects to the employee SSID they are able to obtain a IP from the network's DHCP server. However when attempting to connect to the guest SSID the client does a search for a DHCP server but can't find one. Any clues, resources, answers would be appreciated.

  Read the article

• Networking setup for three systems

  - by srihari

  Hi, I want to setup a client server environment. I have three systems one with Solaris and the other two with windows. I want to install all the database and other software on the Server and enable the client systems a limited access to the system resources. Can anyone help me how to setup this and also the hardware requirements to setup such an environment. Your replies will be mostly appreciable and helpful to others who has similar thoughts or requirements. As we have more programmatical knowledge and less networking knowledge ,please explain in detail Please provide any vedio tutorials links or documents which will be helpfull in this regard. Thanks in Advance, Srihari.

  Read the article

< Previous Page | 495 496 497 498 499 500 501 502 503 504 505 506  | Next Page >