Search Results

Search found 255 results on 11 pages for 'lsusb'.

Page 5/11 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11  | Next Page >

• USB Mouse sleeping after 5 seconds when on battery

  - by yurividal

  My usb mouse sleeps after 5 seconds of inactivity when running on battery power. It wakes uo again when i press any button on the mouse. This is really annoying. I have made lsusb, and I noticed my mouse is Bus 001 Device 012: ID 04d9:2083 Holtek Semiconductor, Inc. I have checked my /sys/bus/usb/devices/usb1/power/autosuspend but it is already set to 0, and the directory usb1 has many subdirectories which also have autosuspend files, and i dont know how to edit them. Also, I would like a permanent solution, which would work for any mouse, on any of my 3 usb ports. Any ideas? Using: Ubuntu 12.04 64bit

  Read the article

• RTL8192SU-based Wi-Fi adapter disconnects permanently

  - by leventov

  I've already tried all possible (http://ubuntuforums.org/showpost.php?p=10129571&postcount=43) solutions, no progress. I'm in despair. In Windows (on the same machine) this adapter works stably. Device: Trendnet TEW-649UB. System details: Ubuntu 11.10; leventov@leventov-ubuntu:~$ uname -a Linux leventov-ubuntu 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux leventov@leventov-ubuntu:~$ lsusb ... Bus 002 Device 002: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191S WLAN Adapter ... leventov@leventov-ubuntu:~$ dmesg | grep 8712 #current driver [ 8.146510] r8712u: module is from the staging directory, the quality is unknown, you have been warned. [ 8.147113] r8712u: DriverVersion: v7_0.20100831 [ 8.147124] r8712u: register rtl8712_netdev_ops to netdev_ops [ 8.147127] r8712u: USB_SPEED_HIGH with 4 endpoints [ 8.147478] r8712u: Boot from EFUSE: Autoload OK [ 8.551272] r8712u: CustomerID = 0x0000 [ 8.551275] r8712u: MAC Address from efuse = 00:14:d1:6c:52:19 [ 8.551625] usbcore: registered new interface driver r8712u [ 9.501351] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" [ 10.160471] r8712u: 1 RCR=0x153f00e [ 10.161241] r8712u: 2 RCR=0x553f00e leventov@leventov-ubuntu:~$ lsmod | grep 8712 r8712u 189049 0 t

  Read the article

• Unable to connect to internet using mobile broadband through samsung mobile SGH-E720/SGH-E840

  - by amit

  I am trying to connect to Internet using Samsung corby Mate in Ubuntu 11.04 which shows using: $ lsusb Bus 005 Device 005: ID 04e8:663f Samsung Electronics Co., Ltd SGH-E720/SGH-E840 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The mobile broadband creates a connection but doesnt connect to internet. Mobile broadband fails to connect. Somehow on Internet I found scripts to connect to Internet, but now only browser can access it, Ubuntu Software center does not recognize this connection and when try to install any software it doesnt display active internet connection. I am using two chatscript & connection in /etc/ppp/peers & /etc/ppp respectively.

  Read the article

• Laptop in-built Web Cam stopped working HP Probook

  - by Dave A

  My laptop (HP Probook) webcam has always worked. When I upgraded to 13.10 it stopped working. No solution found then so gave up. Recently upgraded to 14.04 still not working so thought I would ask anyone again if a solution had been found. lsusb Bus 001 Device 004: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera dmesg | grep uvcvideo` [ 765.466575] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 765.467305] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 765.467954] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26). [ 765.467960] uvcvideo: Failed to initialize the device (-5). [ 765.468022] usbcore: registered new interface driver uvcvideo Tried searching everywhere but there does not appear to be any clear solution to the driver issue - very weird as my camera is listed as supported by uvcvideo and it has always worked.

  Read the article

• Ubuntu 12.04 LTS 64 bit. Logitech m510 mouse not working!

  - by Alonso

  When I run lsusb, this shows up: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver I have followed and done all of the stuff in: Ubuntu cannot detect my Logitech Wireless m510 mouse? Yet my mouse still fails to work!!! When trying to install HIDpoint this appears after entering Y: libpng does not exist libtiff does not exist Gathering System information and generating a log Launching HIDPoint Installer ./hidpointsetup: error while loading shared libraries: libpng.so.3: cannot open shared object file: No such file or directory What can I do to fix this?

  Read the article

• How do I get my RTL8192ce based wireless device working properly?

  - by JonnyTruelove

  I am using the rtl8192cu chipset (on a Belkin wireless USB adapter N300) combined with 64 bit architecture and the 3.8 kernel. Some of you may know that this doesn't work. I tried this fix - RTL8188CU USB Network Adaptor on ubuntu 13.04 and now my internet is super slow. I am totally new to Ubuntu and I am concerned I do not have the right driver. The "stock" driver was the RTL8192cu, but it didn't connect 99% of the time and if it did the upload speed was higher than the download. Right now I am connecting through my laptop with a crossover cable, so my internet connection is just fine in my apartment. Relevant output from lsusb is here: Bus 002 Device 002: ID 050d:2103 Belkin Components F7D2102 802.11n N300 Micro Wireless Adapter v3000 [Realtek RTL8192CU] (bonus question: is that [050d:2103] the actual physical address straight from the hardware? Or does it change when I put different drivers on it? I am concerned I do not have the right driver)

  Read the article

• Logitech Microphone (AK5370) inaudible volume

  - by Iain Lane

  I bought this microphone from Amazon last week. It's detected just fine in 12.10. I can see it in the sound preferences. The problem is that the volume is so low as to be inaudible, even when turned up to maximum in this dialog. It is working, as I can see that the meter responds to noise, but it's just too low. alsamixer's control is the same, so that doesn't help. I tried messing around in pulseaudio too, but to no avail. In lsusb it's Bus 002 Device 004: ID 0556:0001 Asahi Kasei Microsystems Co., Ltd AK5370 I/F A/D Converter.

  Read the article

• How to disable integrated webcam and still be able to use an external one

  - by alikasundara

  I am looking for a way to disable the webcam that is integrated into my laptop. The webcam is using uvcvideo module but I do not want to blacklist it since it is also being used by an external webcam I have. Is there any way of disabling the device itself without touching the modules list? This is how the webcams are listed by lsusb. The first one is an integrated one (It is identified by some apps as BisonCam NB Pro), the second one is the external Logitech C525: Bus 002 Device 004: ID 5986:0361 Acer, Inc Bus 003 Device 002: ID 046d:0826 Logitech, Inc. I have already checked BIOS - there is no way of disabling the webcam from there. Besides I would love to learn how to disable the device by ID anyway. Thanks!

  Read the article

• D-Link DWA-125 Wireless network card not working after upgrade from 10.04 to 12.04

  - by dava2788

  I upgraded to Ubuntu 12.04 and now the wireless network card D-Link DWA-125 doesn't work. I have the drivers from the official website, But neither recognized during installation. iwconfig: lo no wireless extensions. vmnet8 no wireless extensions. ra0 Ralink STA Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. vmnet1 no wireless extensions. dava@Dava-Ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 006: ID 07d1:3c0d D-Link System DWA-125 Wireless N 150 Adapter(rev.A1) [Ralink RT3070] And the chipset: ralink 2870/3070 (rt3070)

  Read the article

• How can I get my wireless webcam to work?

  - by hellocatfood

  I recently bought this wireless webcam. I'm having trouble getting it to work on Ubuntu 11.04. I ran lsusb and got the folowing information about the device Bus 006 Device 003: ID 0416:a91a Winbond Electronics Corp. I did a Google serach for teh device ID and this website informs me that it matches the LogiLink Wireless Webcam (so Maplin probably just rebranded this!). What this website states is that this device should work, which it doesn't. The problem I'm facing is that I don't get any actual video being streamed or shown. The built in microphone works and, when running Cheese, when I press the camera button on the webcam itself the software recognises that the button is pressed. On that note, when running cheese from the terminal with this webcam attached I get the following error libv4l2: error getting pixformat: Invalid argument libv4l2: error setting pixformat: Input/output error Any help is appreciated

  Read the article

• No useful DVB-T card found

  - by Edu

  I am using Ubuntu 12.04 3.2.0-26 kernel and I just added a DVB-T card. I did install the media_build as in (http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers) After that the Restricted Drivers appeared on the screen and I installed the Firmware for DVB Cards. lsusb shows Bus 002 Device 005: ID 048d:9005 Integrated Technology Express, Inc. which is my card. lsmod shows these things regarding dvb dvb_usb_it913x 22173 0 dvb_usb 32369 1 dvb_usb_it913x dvb_core 110010 1 dvb_usb rc_core 26343 2 dvb_usb_it913x,dvb_usb Nevertheless there is no /dev/dvb on my linux and Kaffeine does not find the TV turner. Can anybody help me installing my TV Card? Thanks

  Read the article

• Unable to enumerate USB device on port 2 when connecting Android phone

  - by ProfessionalAmateur

  I'm running Ubuntu 11.10 (64-bit) as a VirtualBox guest on a Win7 64-bit host. When I plug in my Android Epic4g (Galaxy S) both the host and guest see the device properly, however lsusb does not. When I run dmesg I get the following: [ 361.664219] usb 1-2: new full speed USB device number 79 using ohci_hcd [ 362.428798] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 363.313782] hub 1-0:1.0: unable to enumerate USB device on port 2 I get the same type of dmesg message with the USB 2.0 (ECHI) Controller enabled and disabled for the guest OS. I'm stuck with this one, can anyone help?

  Read the article

• How can I use a CanoScan N640Pex scanner over a USB/parallel cable?

  - by detly

  I have an old CanoScan N640Pex flat bed scanner and a USB-to-parallel port cable through which I can connect it to my PC. Unfortunately neither Simple Scan nor XSane detect the scanner. I'm running Ubuntu 12.04 (plus updates and backports) with kernel 3.2.0-31-generic. dmesg tells me this when I plus the cable in: [256411.641910] usb 7-1: new full-speed USB device number 10 using uhci_hcd [256411.872392] usblp0: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [256411.872417] usbcore: registered new interface driver usblp lsusb shows this device for my cable: Bus 007 Device 010: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port The device node created is /dev/usb/lp0 crw-rw---- 1 root lp 180, 0 Sep 9 17:46 /dev/usb/lp0 There is no extra information from any of these commands when I attach the scanner to the cable and power it on, though. I suspect I might need to change something in /etc/sane.d/canon_pp.conf, but I have no idea what to put for the ieee1284 line, since there is pretty much zero documentation for that parameter. So how can I get it to work?

  Read the article

• Start script when connecting phone through usb

  - by choel

  Trying to run a script when my phone is plugged in via USB, a made a udev rule looks like this in /etc/udev/rules.d/85-lazydroid.rule ATTRS{idVendor}=="22b8", ATTRS{idProduct}=="428c", RUN+="/home/joel/.lazydroid" And the script .lazydroid looks like this: #!/bin/bash exec adb forward tcp:8080 tcp:8080 & exec chromium-browser 127.0.0.1:8080 --new-window & The script itself runs fine. The trick is I can't get the script to run up on insertion of the phone. And it's the right ID according to: lsusb | grep Motorola Bus 002 Device 042: ID 22b8:428c Motorola PCS Any ideas?

  Read the article

• Usb/vga not recognized anymore

  - by Peter Raeves

  I don't know what happened, but yesterday everything worked fine, but when I woke up this morning and booted my computer to Ubuntu 14.04 a bunch of hardware isn't recognized anymore. I use a dual monitor setup with dvi-d and vga, but the vga screen isn't recognized anymore and the dvi-d monitor is recognized as "Built-in Display" while I'm not on a laptop. Also every device connected through usb isn't recognized anymore either. I have a keyboard with the blue round connector, which still works, so I can still log in though. The computer goes slower than usual and I have no idea what has happened. Can anybody point me in the direction I should start looking, because this is scary! I just checked and both the front and back sound connectors stopped working also :/ Edit: The devices connected through USB are recognized as they all show up using sudo lsusb, Ubuntu just doesn't let me use them anymore.

  Read the article

• USB Port not working for Ubuntu 14.04 LTS

  - by user292125

  I have recently installed Ubuntu 14.04 LTS on my system. But the usb port does not seem to be working. When I type lsusb in terminal, following is displayed on the screen: Bus 002 Device 114: ID 0951:1665 Kingston Technology Bus 002 Device 004: ID 413c:2106 Dell Computer Corp. Dell QuietKey Keyboard Bus 002 Device 003: ID 04ca:0062 Lite-On Technology Corp. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub. However the disk utility shows no media. Kindly help me on this. Suggestions will be appreciated.

  Read the article

• How do I make a USB RS232 dongle show up in /dev/ttyUSB* ?

  - by mtrw

  I have a couple of FTDI based USB to Rs232 serial dongles. Sometimes when I plug them into my Ubuntu 10.04 laptop, they show up as /dev/ttyUSB0 and /dev/ttyUSB1, which is what I want to have happen. But sometimes they don't. When they don't, sometimes rebooting fixes the problem and sometimes it doesn't. They always show up in lsusb hanging off of Bus 5: Bus 005 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Bus 005 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub I can see them if I do ls /dev/bus/usb/005 as 002 and 003. But if I pass /dev/bus/usb/005/002 to pyserial, which is what I'm using to access /dev/ttyUSBx, I get SerialException("Could not open port: [Errno 13] Permission denied: '/dev/bus/usb/005/002'",).

  Read the article

• Keyboard activation bug

  - by Skydreamer

  I'm using Ubuntu's last version and there's still a little problem on my installation (already on previous versions). When I start the computer and reach the login screen, I have to wait about a minute to be able to begin to use my keyboard. That's not a real problem but that's kind of annoying. I've tried some things such as a lsusb via ssh and it worked and activated the keyboard without waiting. So I've tried to put it in the crontab (with @reboot) but it doesn't really work. Has someone got an idea how to solve this bug ? Thank you in advance.

  Read the article

• Bluetooth not seeing mouse (Fedora)

  - by Chris

  I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt), blueman-manager, or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

  Read the article

• Linux Bluetooth [closed]

  - by Chris

  Not sure if this is the proper forum; please forgive me if it's not... I have a Lenovo S10 'netbook' that I've installed Fedora 17 ("LXDE spin") on. So far pretty much everything works great, except, the on-board Bluetooth. lsusb shows the controller present (0a5c:2101 Broadcom Corp. Bluetooth Controller), hcitool dev shows hci0 present, but when I put my mouse ("Lenovo Bluetooth Laser Mouse," which works perfectly paired with a MacBook Pro, MacBook Air, Mac mini, and Lenovo SL500 (with a USB dongle; running Windows 7)) into pairing mode and run either hcitool scan (reports "Scanning ..." and, without further information or error message, returns to the shell prompt) or bluetooth-wizard (from the gnome-bluetooth package) and try to detect the mouse, I get nothing... Frustrating! Thanks anyone who can point me in the right direction!

  Read the article

• connecting to bsnl wll, with huawei fixed wireless modem with connected to usb port on linux mint.

  - by Rakesh

  On windows, when I plugged in the usb connector, to the device was recognized as a mass storage device and installed all the drivers, to my computer, then the device, automatically restarted and started behaving like a modem, I'm writing this post, using the same modem, through windows... On linux mint (debian kernel, similar to ubuntu 8.10), the device is recognized as a mass storage device, some times, but, has no programs, useful for linux... When I use the modem on windows and restart the computer and login to linux, the device shows up as "not yet configured" in the terminal command "lsusb"... I googled a lot for solutions, tried many things, atlast, configured it and run the command "wvdial". But, get the error, that the modem is not responding, at last ! :'( Please help me out... Many more people are facing this problem, as I could discover, when I googled for it. this is the website address of huawei, the company of my modem... "www.huawei.com" Specification: model: ETS1220 FEQ: 800M Thank you.

  Read the article

• Linux Logitech QuickCam Pro 9000 - microphone issues

  - by drahnr

  I got a Logitech Quickcam Pro 9000, the cam itself is working as it honors the UVC spec. This fancy WebCam has a integrated mic which worked some time before but now, it does no more. (Note: I use pulseaudio as it is a USB Mic and I am not really keen on the hassle of ALSA setup) Things I check already are if it gets detected at all: $ lsusb |grep Logi Bus 002 Device 002: ID 046d:0809 Logitech, Inc. Webcam Pro 9000 is muted in alsa-mixer - not the case, volume at 100 pavucontrol shows it too, but no input level bar! On top of that, if I open the gnome3 (fallback mode) audio panel(from the desktop panel), and disabel/reenable it in the hardware tab, it works "for some time"... Any hints? Any ideas? I am really out options for now, and the fact it worked like 6 months ago (perfectly) makes it no better.

  Read the article

• How to use Ralink RT2501/RT2573 as wifi access point in Debian Linux

  - by user60813

  Hi, I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable. I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that. I have tried installed wicd, but it does not help. I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff. So my question is: How do I set up this USB wifi card as wireless access point in Debian Lenny?

  Read the article

• Linux USB/Serial port won't create a tty device in /dev

  - by Dave

  I am connecting a USB to serial driver port to my system and I get about halfway to where I need to go. When it is plugged in dmesg indicates: <6>usb 2-1: new full speed USB device using sl811-hcd and address 4 <6>usb 2-1: configuration #1 chosen from 1 choice and lsusb Bus 2 Device 4: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 2 Device 1: ID 0000:0000 Bus 1 Device 1: ID 0000:0000 I get a series of usbdev2.4 (usbdev2.4, usbdev2.4_ep00, etc) devices in dev but no ttyUSB0 or anything that I can open with minicom. How do I get the system to create the /dev device? Thanks Dave

  Read the article

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11  | Next Page >