Search Results

Search found 255 results on 11 pages for 'lsusb'.

Page 7/11 | < Previous Page | 3 4 5 6 7 8 9 10 11  | Next Page >

  • Ubuntu 12.04 problem with E160 huawei - can't detect the device nad freezing system

    - by Matt
    i just installed 12.04, plug in E160 and nothing happend - modem doesnt mount. i found this solution : Ubuntu does not mount some Huawei devices due to bugs, problems etc. See if these work: 1st option: Connect the USB modem. After 10 seconds, type this in a terminal window: lsusb The output will be like this: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd. Bus 004 Device 002: ID 413c:3016 Dell Computer Corp. Optical 5-Button Wheel Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 002 Device 004: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The device is a Huawei modem, so let's look at the output. The relevant entry is: Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd Hence, you must type: sudo modprobe usbserial vendor=0x12d1 product=0x140b 2nd option Download usb-modeswitch and usb-modeswitch-data packages from packages.ubuntu.com. Install them through the command: sudo dpkg -i usb-modeswitch*.deb 3rd option Try a combination of both. but with no result. Modem still is not detected. I've tried to add new conection but system can't see my device in setup dialogue. Also i noticed that when i open eg. terminal and try to type sth, system freeze for a while.. Thx for help!

    Read the article

  • My Android phone isn't being detected by Ubuntu

    - by Lara
    This is what I've got from terminal, looks like it can see the phone as a USB device just fine but isn't showing up under fdisk so I can't mount it. It automounts just fine in my VMWare Windows. And Internet tethering works fine while under Linux (haven't tried under Windows). Here's lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 019: ID 04d9:1135 Holtek Semiconductor, Inc. Bus 001 Device 003: ID 05ca:18c0 Ricoh Co., Ltd Bus 001 Device 004: ID 0489:e00f Foxconn / Hon Hai Foxconn T77H114 BCM2070 [Single-Chip Bluetooth 2.1 + EDR Adapter] Bus 003 Device 010: ID 04e8:6860 Samsung Electronics Co., Ltd Bus 002 Device 012: ID 046d:c315 Logitech, Inc. Classic New Touch Keyboard And here's sudo fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001ff06 Device Boot Start End Blocks Id System /dev/sda1 2048 681845797 340921875 7 HPFS/NTFS/exFAT /dev/sda2 * 681846784 845686783 81920000 83 Linux /dev/sda3 845686784 968566783 61440000 7 HPFS/NTFS/exFAT /dev/sda4 968568830 972475081 1953126 5 Extended /dev/sda5 968568832 972475081 1953125 82 Linux swap / Solaris Disk /dev/mapper/cryptswap1: 2000 MB, 2000000000 bytes 255 heads, 63 sectors/track, 243 cylinders, total 3906250 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbe4c2ec7 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table

    Read the article

  • Microsoft IntelliMouse episodic pauses

    - by Rob Hills
    I have a Microsoft IntelliMouse connected via USB to a computer (directly, NOT via hub) currently running Ubuntu 11.10, but this problem also existed before we upgraded from 10.10. Every now and then (apparently randomly) the computer "pauses" for anything up to a few seconds. This usually occurs after a mouse movement and during the pause, the computer is completely unresponsive to mouse or keyboard. lsusb shows: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0409:0058 NEC Corp. HighSpeed Hub Bus 001 Device 004: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 013: ID 045e:001e Microsoft Corp. IntelliMouse Explorer Bus 001 Device 005: ID 04a9:1097 Canon, Inc. PIXMA iP5000 Bus 001 Device 006: ID 0a5c:200a Broadcom Corp. Bluetooth dongle Bus 001 Device 007: ID 0911:1c57 Philips Speech Processing Bus 001 Device 008: ID 04a9:2219 Canon, Inc. CanoScan 9950F so the mouse appears to be correctly identified. Syslog episodically shows the following sequence: Jan 15 11:48:32 kayes-computer kernel: [10588.512036] usb 3-1: USB disconnect, device number 10 Jan 15 11:48:33 kayes-computer kernel: [10589.248026] usb 3-1: new low speed USB device number 11 using uhci_hcd Jan 15 11:48:33 kayes-computer mtp-probe: checking bus 3, device 11: "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1" Jan 15 11:48:33 kayes-computer kernel: [10589.448596] input: Microsoft Microsoft IntelliMouse® Explorer as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input11 Jan 15 11:48:33 kayes-computer kernel: [10589.448706] generic-usb 0003:045E:001E.000B: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:1d.1-1/input0 Jan 15 11:48:33 kayes-computer mtp-probe: bus: 3, device: 11 was not an MTP device though I can't confirm if these are directly associated with the "pauses". Any thoughts on what might be causing this or what else I can do to diagnose the problem?

    Read the article

  • My card reader doesn't show up at all, but previously did in 10.10

    - by Nathan J. Brauer
    I bought a pin-based-USB powered internal media card reader and it worked perfectly when I first installed Ubuntu 10.10 a month ago. I used it a few times since and today I booted up the computer and it's not working. Here's how it used to work: In nautilus->computer, 5 "drives" would display even when no card was inserted. One for each slot (SD, XD, CF/MS, etc). Opening one w/o a card would initiate a "Please insert card." dialog. Inserting a card would automatically open nautilus. Now: No drives display at all whether cards are inserted or not. lsusb lists the following (which seems to indicate that it's not being detected) Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 046d:c52e Logitech, Inc. (my keyboard/mouse) Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub (A side note, all of my USB ports are 2.0 + 1 USB port which is 3.0, why does everything say 1.1/2.0?) I tried using ubuntu-bug but for USB devices it expects you to be able to remove and insert them while the computer is running -- obviously something you probably shouldn't be doing when you're dealing with devices plugged straight into the USB pins. Thanks in advance!

    Read the article

  • How to install Wacom Bamboo Pen

    - by casadrya
    I have a new Wacom Bamboo Pen. I'm using Ubuntu 10.10 64bit. After googling a little bit, I checked that xserver-xorg-input-wacom was installed. I plugged in my tablet. I rebooted my computer. Nothing special happened. I opened Inkscape. The tablet didn't work. I opened Inkscape's Input devices dialog. I didn't understand anything. I tried to blindly click some options in that dialog but nothing seemed to have any effect. Same with Gimp. After googling some more I found the linuxwacom website with source code, this didn't seem to work. So... any help? As requested: lsusb Bus 005 Device 002: ID 056a:00d4 Wacom Co., Ltd dmesg | tail [ 492.961267] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 493.144862] input: Wacom Bamboo 4x5 Pen as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input6 [ 493.158854] input: Wacom Bamboo 4x5 Finger as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input7

    Read the article

  • How do I get OBDII software working?

    - by NoBugs
    I have an ODBII USB cable for vehicle diagnostics, unfortunately I haven't been able to get it working on Ubuntu 12.04. The closest I've come is using the VAG-COM software with wine, using the ln -s /dev/ttyUSB0 ~/.wine/dosdevices/com1 trick and running stty -F /dev/ttyUSB0 speed 9600 repeatedly. It will connect and show the vehicle is OBDII, but none of the useful features seem to be working. I tried: Scantool - says it's connecting to the /dev/device in terminal, but doesn't. obdgpslogger - times out all the time. pyobd - This seems to be the most up-to-date source I could find, I had to adjust the code a bit to work (see here for changes). Still, in obd_io.py interpret_result function, it says it's looking for 4 space separated numbers, where the usb-serial is receiving bogus code "0100" instead? The device shows up in lsusb as: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Is the problem that these native tools don't expect a USB serial, or a serial of this type? Or are these apps too old to recognize OBD2 of this vehicle?

    Read the article

  • Dell Laptop's Bluetooth isn't detected by Ubuntu

    - by vishwaje
    I have Dell vostro 3500 Laptop. I Installed Ubuntu 12.04. It doesn't detect my bluetooth. below is my information. lsusb | grep Bluetooth Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) lsmod | grep bluetooth bluetooth 158438 10 bnep,rfcomm rfkill list 0: brcmwl-0: Wireless LAN Soft blocked: yes Hard blocked: no 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: no (wifi working fine. I disabled it using network menu. So, it's fine) dmesg | grep Bluetooth [ 21.981835] Bluetooth: Core ver 2.16 [ 21.981872] Bluetooth: HCI device and connection manager initialized [ 21.981877] Bluetooth: HCI socket layer initialized [ 21.981881] Bluetooth: L2CAP socket layer initialized [ 21.981891] Bluetooth: SCO socket layer initialized [ 21.986047] Bluetooth: RFCOMM TTY layer initialized [ 21.986059] Bluetooth: RFCOMM socket layer initialized [ 21.986065] Bluetooth: RFCOMM ver 1.11 [ 22.361783] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.361791] Bluetooth: BNEP filters: protocol multicast So How can I fix this? I saw other place (I don't remember which site) They said, some times, when in windows, if bluetooth disabled by windows driver, It can't be enabled by linux. So, I should install windows and enable blueethooth from windows and then re install linux. That is impossible for me, because I don't have Windows installation media. But I tried this, which is I installed windows xp on virtual box. Vbox showed me thow unknow USB devices. I connected them and installed windows bluethooth drivers to xp. But it didn't ditected Bluethooth either. Also, when I set off mode in hardware switch, those unknown devices disappear from Vbox usb device seletcion menu. So, they are definitely something to do with wifi or bluethooth. Please help me..

    Read the article

  • USB mass storage couldn't get mounted

    - by revo
    It's my android phone SD card which was indicated damaged by android yesterday night, out of the blue! I put it directly to a USB port with a USB SD card holder case, so in that way I can recover it with TestDisk, which I had experienced before on a similar situation. I also noticed that there is a change in file system and capacity: File System : RAW Capacity : 0 (unknown capacity) Also TestDisk doesn't show it on its partitions list. A 2 GB SD card is not that important in price but I've a lot of files and medias which I need them. Used a mini card reader, TestDisk displayed it on its list but a quick search and or a deep search doesn't have any results No partition found or selected for recovery and then I should quit the program. Your help is appreciated. Update #2 lsusb output: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 04f3:0234 Elan Microelectronics Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • 1.5 TB USB Drive failed to mount

    - by user89348
    Seagate 1.5Tb FreeAgent USB Hard Drive. Formatted FAT32. I figure it is 75% full. Used to work fine in XUBUNTU it shows up in Cairo Dock but when I click on it I get "failed to mount drive'. Nautilus does not display the icon nor does Thunar. Windows Vista will no longer recognise drive either. Back Track 5R3 also no longer fails to mount it. BUT and here is the BIG BUT my Pioneer DV-410 reads the files and plays the everything just fine. I believe this all happened after an unclean shutdown / XUbuntu 12.10 system freeze. Why can't XUBUNTU mount this drive when a crappy 13 year old DVD player can mount it. I am desperate to back up the data before just in case the drive becomes completely unreadable. Using XUBUNTU 12.10 Quantal current 3.5.0.17 Kernel (past 3 Kernels wont read it either) and all newest apt-get update / dist-upgrade are applied. I will post any other info you folks request as needed. Additional info as requested by githlar. $ sudo fsck.vfat /dev/sdb dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN Read 512 bytes at 0:Input/output error $ lsusb Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 002 Device 002: ID 0bc2:3001 Seagate RSS LLC Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    Read the article

  • USB device is recognized but has no address

    - by SeanMG
    Good day folks, I'm trying to use a USRP1 with GNURadio if anyone knows what any of that is. I am running Ubuntu on a Windows 7 machine via VMware player. When I connect this USRP1 via USB 2.0 drive to Windows 7 it is recognized as Ettus Research LLC USRP1... When I connect the device to Ubuntu through VMware, it shows: usb device fffe:0002 on my removable devices. When I run lsusb I receive the following: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 001 Device 004: ID fffe:0002 When I run this program that comes with the USRP driver... uhd_find_devices I receive: -------------------------------------------------- -- UHD Device 0 -------------------------------------------------- Device Address: type: usrp1 name: serial: 00000000 So when I run this program, it does recognize the fact that this device is connected. However, the device has no address, no name, and has a null serial. I need to know the device address so I can run more programs in GNURadio. Does anyone know what the problem is here? Thanks!

    Read the article

  • Huawei e303c data-card not working for Ubuntu 11.04?

    - by Umashankar
    Cheers to you. I got a problem in making a Mobile-BroadBand connection in Ubuntu 11.04, using 'Huawei e303c' usb data-card. I'm using Tata Docomo 3G sim-card (India, circle: Maharastra). My observations: 1.) I installed the device's driver 'Mobile-Partner For Linux'(which came up with the device). But it is not detecting my device. 2.) In Network Manager, Adding a Mobile-BroadBand connection is not able to detect the device (with or without the device's driver installed). 3.)I tried softwares like usb_modeswitch, gnomeppp, wvdial, sakis3G and followed their guidelines. These too didn't work. 4.) Without the driver, the system is able to identify the device (Mobile-Partner icon comes-up, that leads to driver setup files). But after installing the driver, nothing comes-up there. 5.) In all the above cases, when 'lsusb' cmd is fired, the prompt shows the connected data card (as 'DEVICE_ID:VENDOR_ID Huawei Technologies Ltd.,'). This is my problem. Give a solution to get my device connected. -Umash

    Read the article

  • Webcam doesn't work in Ubuntu 12.10

    - by Kzhi
    I have Gembird cam68ut. On my Ubuntu 12.10 it shows black screen in cheese and guvcview. I tested it in win7, it works fine. Here what I found: It is a uvc compliant camera, I checked on the site: 18ec:3299 USB 2.0 PC Camera (model number QC3231) ArkMicro This webcam is report by lsusb: Bus 001 Device 004: ID 18ec:3299 Arkmicro Technologies Inc. Here is the output of dmesg | tail: uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (18ec:3299) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input17 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) When I run cheese (or guvcview), here what I get in terminal: libv4l2: error turning on stream: No space left on device (cheese:11797): cheese-WARNING **: Internal data flow error. I tried it on different usb slots with the same results The Webcam's microphone works, I can record audio with it Guys, any thoughts on what can be done to make it work?

    Read the article

  • Trendnet tew-424ub wireless not working after update 12.10

    - by dwa
    I updated packages from the software manager and now my wireless won't work. It's a Trendnet tew-424ub iwconfig says lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network: description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 1c:6f:65:46:e9:d4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.137 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:de00(size=256) memory:fdaff000-fdafffff memory:fdae0000-fdaeffff memory:fda00000-fda0ffff lsusb: Bus 003 Device 002: ID 0bc2:3332 Seagate RSS LLC Expansion Bus 003 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 006: ID 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter Bus 005 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 0781:5530 SanDisk Corp. Cruzer Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Help? I'm not sure where to start. I've been browsing forums and such for a long time and nothing I try is working.

    Read the article

  • Bluetooth not working on Acer 3820tg (Ubuntu 12.04)

    - by Iohannes
    After upgrading to 12.04 (it was done by a complete reinstallation), bluetooth doesn't work anymore. Before (I think it was Ubuntu 11.04), I just followed instructions on this page and copied /lib/firmware/ath3k-2.fw to /lib/firmware/ath3k-1.fw and everything was fine. But in 12.04, there isn't any ath3k-2.fw in the /lib directory, so this method is not possible. Also, pressing Fn+F3 doesn't work. I would appreciate any help. Some further information (I hope it's enough): dmesg [ 23.063710] Bluetooth: Core ver 2.16 [ 23.063740] NET: Registered protocol family 31 [ 23.063743] Bluetooth: HCI device and connection manager initialized [ 23.063746] Bluetooth: HCI socket layer initialized [ 23.063747] Bluetooth: L2CAP socket layer initialized [ 23.063972] Bluetooth: SCO socket layer initialized [ 23.066930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.066934] Bluetooth: BNEP filters: protocol multicast [ 23.068422] Bluetooth: RFCOMM TTY layer initialized [ 23.068428] Bluetooth: RFCOMM socket layer initialized [ 23.068430] Bluetooth: RFCOMM ver 1.11 lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID 046d:c05f Logitech, Inc. Bus 002 Device 004: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 005: ID 0402:9665 ALi Corp. Gateway Webcam hcitool dev Devices:

    Read the article

  • Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

    - by Gaurav_Java
    I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

    Read the article

  • Update usb Driver

    - by Enrico Caponi
    i just now start to use Xubuntu, and i install Xubuntu on my second laptop i had in my garage, just for put back in use. On the ASUS xubuntu work really perfect but now after i put on my old laptop i have some little proble. My Laptop old is a Fujitsu Siemens AMILO L7310GW, i explain my problem: The installation works fine, everything is quite good but there are few little problem i have a know idea, how I can fix them... so USB: i have a optical mouse usb and works quite strage, when i tip on terminal "lsusb" the system recognized fine my mouse but the strange thing is the mouse it move like jump around the desktop. what i had done: - update the usbdrive - change mouse - tried mouse on different pc and on both they work fine another problem i don't know where came from: when i take off my mouse, and try to put back doesn't work at all, if i want back i have to restart the OS. and no usb pen or other ar working so for that i think is usb problem. i can tell before Xubuntu whit winXP the usb work fine, but i don't want windows anymore... So i tried almost everything you can find on the net, maybe i have done something wrong so please help me. I tried also to install the new version 12.04, but i came back for the 11.10.

    Read the article

  • USB Keyboard doesn't work in Ubuntu 14.04

    - by Steven Crossan
    My USB keyboard isn't working in Ubuntu 14.04, but also didn't work in 13.10. I upgraded today in the hope that the issue would be resolved, but it wasn't. The keyboard works in BIOS and GRUB but stops working when I reach the login screen. It is detected by the system, but just doesn't work. Output of lsusb: Bus 002 Device 002: ID 0846:9011 NetGear, Inc. WNDA3100v2 802.11abgn [Broadcom BCM4323] Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 1532:000d Razer USA, Ltd Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 060b:2231 Solid Year KSK-6001 UELX Keyboard Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub I added: hid usbhid hid_generic ohci_pci To /etc/initramfs-tools/modules and did update-initramfs -u, but that didn't work. I'm new to Ubuntu/Linux and any help you could provide would be greatly appreciated!

    Read the article

  • No Wireless In Ubuntu 13.10

    - by viktorhubinette
    When I upgraded to Ubuntu 13.10, I can't connect to wireless. The only thing I can connect to is ethernet, so please help me, What should I do? Here is the output of the lspci -nnk | grep -i net -A2 00:19.0 ethernet controller [0200]:intel corporation 82579V Gigabit network connection [8086:1503] (rev 04) subsystem: acer incorporated [ALI Device] [1025:8000] Kernel driver in use : e100e output of lsusb: Bus 002 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:0152 Realtek Semiconductor Corp. Mass Storage Device Bus 001 Device 040: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 004: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter Bus 003 Device 003: ID 045e:070f Microsoft Corp. Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick

    - by user1622959
    A short time after accessing the internet, the browser/download times out. Before the timeout, the internet works OK briefly; afterwards, the wireless is still connected with a strong signal, but every internet access results in a timeout. When I leave the PC for a while, the internet is back just to timeout again as soon as I start using it. The same happens when I reconnect to the router. Also, when I surf the internet, it takes a couple of minutes until the timeout, but when I download something, it times out in a matter of seconds. The wireless adapter works just fine in Windows and internet via ethernet cable works just fine in Ubuntu. Does anyone have the same problem or knows a solution. I use Ubuntu 12.10 x64. The problem occurs since I installed ubuntu (which was a few days ago). Here some stuff that might be usefull: serus@serus-Ubuntu-PC:~$ lsusb Bus 002 Device 002: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 802.11n [Atheros AR9170] serus@serus-Ubuntu-PC:~$ lsmod Module Size Used by carl9170 82083 0 serus@serus-Ubuntu-PC:~$ modinfo carl9170 filename: /lib/modules/3.5.0-21- generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko alias: arusb_lnx alias: ar9170usb firmware: carl9170-1.fw description: Atheros AR9170 802.11n USB wireless serus@serus-Ubuntu-PC:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"virginmedia0137463" Mode:Managed Frequency:2.462 GHz Access Point: A0:21:B7:F8:29:B6 Bit Rate=240 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:1399 Invalid misc:18 Missed beacon:0 serus@serus-Ubuntu-PC:~$ sudo lshw -C network *-network description: Wireless interface physical id: 1 bus info: usb@2:2 logical name: wlan0 serial: 00:27:19:bb:00:19 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.5.0-21-generic firmware=1.9.4 ip=192.168.0.6 link=yes multicast=yes wireless=IEEE 802.11bgn

    Read the article

  • BCM2046B1 Bluetooth Dongle connection problem

    - by Andfoy
    Well i have a Blueooth dongle with an BCM2046 IC intrregated, my problem is that when i connect it, Ubuntu recognize it, but it don't work whe i try to scan or scan the PC from other device, i replaced the default Gnome Bluetooth manager and i installed Blueman, but the problem presists. The Bluetooth LED indicator appears to be "working". I'm using 11.10 Oneiric Ocelot hcitool dev: Devices: hci0 89:21:XX:XX:XX:XX lsusb: Bus 002 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 002 Device 004: ID 0a5c:2100 Broadcom Corp. Bluetooth 2.0+eDR dongle hciconfig -a: hci0: Type: BR/EDR Bus: USB BD Address: 89:21:XX:XX:XX:XX ACL MTU: 1017:8 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:1329 acl:0 sco:0 events:40 errors:0 TX bytes:671 acl:0 sco:0 commands:35 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x4a0100 Service Classes: Networking, Capturing, Telephony Device Class: Computer, Uncategorized HCI Version: 2.0 (0x3) Revision: 0x4000 LMP Version: 2.0 (0x3) Subversion: 0x430e Manufacturer: Broadcom Corporation (15) Sorry for my English and thanks for any hints.

    Read the article

  • Slow USB 3.0 speeds

    - by Cygnus X
    Long time forum forager, first time poster. I bought a Toshiba 500 GB usb 3.0 hard drive last week and instantly ran home to see how fast I could push it. On my desktop (that I built) I was able to get 200 MB/sec. On my laptop (MSI FX something or other), which I dual boot Windows 7/Ubuntu 11.10, I was able to get about 120 MB/sec on Windows, but on Ubuntu, i get about 25 MB/sec. lsusb shows: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0bda:0139 Realtek Semiconductor Corp. Bus 002 Device 003: ID 1532:0015 Razer USA, Ltd Bus 004 Device 002: ID 0480:a007 Toshiba America Info. Systems, Inc. lspci -vvv shows that the USB 3.0 host controller is using the kernel driver in use is xhci_hcd. dmesg |grep usb shows: [ 1815.455368] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1815.475459] scsi7 : usb-storage 4-1:1.0 The built in disk utility says its connected via usb at 705 MB/s, but that's not what it reports when I transfer files over to it. Not really sure what to do at this point. Any help would be very nice, thank you.

    Read the article

  • SD card won't appear after upgrade to 13.10

    - by Pixel
    My SD card won't mount when I put it into my lap top, everything was fine before the upgrade. The information about the SD card appears just fine when I type "sudo fdisk l " it just says that it doesn't have a valid partition table. When I type "_sudo blkid" I get the following answer: /dev/sda1: UUID="CCA8-9030" TYPE="vfat" /dev/sda2: UUID="8a1d135b-384b-432d-b608-64dcf09ada24" TYPE="ext2" /dev/sda3: UUID="7s6PtU-kj2Z-N8XD-0mzl-840i-i3HG-enlbAf" TYPE="LVM2_member" /dev/sr0: LABEL="Bamboo CD" TYPE="iso9660" /dev/mapper/ubuntu--vg-root: UUID="c9b521c8-7c9f-493b-95c8-a7d79c465318" TYPE="ext4" /dev/mapper/ubuntu--vg-swap_1: UUID="7f155ab6-e1b9-485b-a2bc-443c0622284d" TYPE="swap" When I use lsusb: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 13d3:5710 IMC Networks UVC VGA Webcam Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I've read the other threads and I couldn't really find any good answers, my card reader was compatible with the previous version of ubuntu, so technically it should still be compatible with the next version. Also I can't erase what's on the card, it contains important data which I need... :/ If you need anymore information just ask, I'll give it as soon as I can. Pixel.

    Read the article

  • File doesn't exist when trying to change permissions following the avasys image scan manual

    - by Howard Graham
    I was finally able to connect to avasys.jp and downloaded and installed iscan_2.28.1-3.ltdl7_amd64.deb iscan-data_1.13.0-1_all.deb. The programs appeared to install correctly. I then ran sane-find-scanner and got back: found USB scanner (vendor=0x04b8, product=0x012d) at libusb:001:003 I then ran lsusb and got back: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 04b8:012d Seiko Epson Corp. Perfection V10/V100 (GT-S600/F650) Bus 001 Device 004: ID 03f0:4817 Hewlett-Packard Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse the avasys image scan manual instructed me to run chmod 0666 /proc/bus/usb/001/003 which returned chmod: cannot access `/proc/bus/usb/001/003': No such file or directory In 12.04, no such directory exists. 12.04 appears to deal with USB in another way. What must I do to get the usb port 001/003 recognized by xsane and sane as the port where the scanner can be located? What must I do to continue installing the scanner?

    Read the article

  • ifconfig can't see USB wireless

    - by Alex
    I have a wifi USB dongle which I have previously used on a Raspberry Pi (this it is what it is target at). I am trying to get it working on an Nvidia Jetson TK1, however I am having some problems. When I run ifconfig I can't see the wifi, only the ethernet and local loopback. iwconfig reports no wireless extensions on all devices. lsusb does find the device: Bus 002 Device 008: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter So I am not sure why the network tools can't see it. I have tried logging on with a GUI and opening up the network settings through Unity, but cannot see any wireless devices either. Not sure if this is useful, but output of lsmod: Module Size Used by nvhost_vi 2940 0 How can I enable wireless networking on this computer? Command line approach is preferred, but either is fine. UPDATE I don't have the kernel module rt2800usb anywhere on my system. If I do an apt-file search for rt2800usb it lists a number of packages of the pattern: linux-image-3.13.0-*. Perhaps installing one of these will do the trick, but can anyone tell me if its safe to do so?

    Read the article

  • SDcardReader/Writer is not connected

    - by Insuk
    My IOGEAR sdCardReader/Writer is recongized on Ubutu(by using VM ware) but when I tried to connect to "Removable Devices - Alcor Micro Flash Card Reader/Writer" , the follwoing message is appeared. " The connection for the USB device "Alcor Micro Flash Card Reader/Writer" was unsuccessful. The device is currently in use. " But I think it is not used. Should I use IOGEAR driver for this one? When I connect the card reader, Ubuntu automatically got the "Alcor Micro Flash Card Reader/Writer" . How can I fix the problem? Thank you, Insuk the result of lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0b95:7720 ASIX Electronics Corp. AX88772 Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 004: ID 0e0f:0008 VMware, Inc. Bus 002 Device 005: ID 0403:bcda Future Technology Devices International, Ltd From the vmware log : 2013-10-18T09:00:07.494-06:00| vmx| I120: USB-CCID: Could not establish context: SCARD_E_NO_SERVICE(0x8010001d). 2013-10-18T09:00:07.494-06:00| vmx| I120: USB-CCID: Could not establish context: SCARD_E_NO_SERVICE(0x8010001d).

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11  | Next Page >