Search Results

Search found 19279 results on 772 pages for 'everything'.

Page 504/772 | < Previous Page | 500 501 502 503 504 505 506 507 508 509 510 511  | Next Page >

  • Getting Server 2008 R2 to ignore all traffic from Internet-facing NIC, leaving it to a VM

    - by Wolvenmoon
    I got in to Server 2008 R2 via Dreamspark and would like to start learning on it. I don't have much option but to put it on a system sitting between the Internet and my home LAN due to electricity bills and the fact that 3 computers in an 11x11 space in 102 degree weather is pretty stygian. Currently I use a ClearOS gateway to manage everything, what I'd like to do is take my server 2008 R2 box, which has two NICs, and drop it at the head of my network. I'd want Server 2008 R2 to ignore all traffic on the external facing NIC and pass it to a virtual ClearOS gateway, and to put all its Internet traffic through its other NIC - which will face the rest of my network and be the default gateway for it. The theory is to keep the potentially vulnerable Server 2008 R2 install as tucked behind a Linux box as possible, without sacrificing too much performance. This is a home network that occasionally hosts dedicated game servers and voice chat servers, so most malicious activity is in the form of drive by non-targeted attacks, however, I don't trust Windows Server because I don't know the OS well enough, yet. So, three questions: How do I do this, am I going to be reasonably more secure doing this than if I just let the Server 2008 R2 rig handle all the network traffic and DHCP (not an option), and should I virtualize the Server 2008 R2 rig instead and if so in what? (Core 2 Duo e6600 w/ 5 gigs usable RAM)

    Read the article

  • Windows Vista will not boot; the file header checksum does not match the computed checksum

    - by Magnus
    Right out of the blue, my wife's Sony Vaio stopped booting. This, not so fun, error message displays immediately after POST: The system cannot boot. The file is possibly corrupt. The file header checksum does not match the computed checksum The repair option on the Vista DVD says everything is fine and dandy, it couldn't be more happier or more clueless... Any ideas? Update: CHKDSK reports no issues. CHKDSK /r reports no issues. (Heck, both Windows Repair and CHKDSK could just as well tell me that I have won on lottery or that the earth is flat... ) Some have reported that a mem diagnostic could help, but for me the mem diag has just ran through 5 passes. It doesn't seem to help. According to Sony, pressing F10 should bring up the restore menu, but it doesn't, the error pops up straight after Bios POST. It seems that this error is first in line of all options at this point, and is doesn't put a smile on my face. I have attached an external USB drive and copied all user data/documents to it. I feel an OS re-install is around the corner.

    Read the article

  • Nagios NTP, discarding peer

    - by picca
    We're using nagios *check_ntp_time* for monitoring time on our servers. Unfortunately the service is flapping. And reporting a lot of false-positives. It happens everytime for random server in random day time and lasts for ~10-30 minutes. When the problem occurs we get: watch01:~ # /usr/lib/nagios/plugins/check_ntp_time -H lb01 -w 1 -c 2 -v sending request to peer 0 response from peer 0: offset 0.07509887218 sending request to peer 0 response from peer 0: offset 0.07508444786 sending request to peer 0 response from peer 0: offset 0.07499825954 sending request to peer 0 response from peer 0: offset 0.07510817051 discarding peer 0: stratum=0 overall average offset: 0 NTP CRITICAL: Offset unknown| When everything is ok, we get (I used different server to not have to wait): watch01:~ # /usr/lib/nagios/plugins/check_ntp_time -H web02 -w 1 -c 2 -v sending request to peer 0 response from peer 0: offset 0.0002282857895 sending request to peer 0 response from peer 0: offset 0.0002194643021 sending request to peer 0 response from peer 0: offset 0.0002347230911 sending request to peer 0 response from peer 0: offset 0.0002293586731 overall average offset: 0.0002282857895 NTP OK: Offset 0.0002282857895 secs|offset=0.000228s;1.000000;2.000000; We are using: check_ntp_time v1.4.15 (nagios-plugins 1.4.15) on Debian squeeze. Remote ntp daemon is: ntpd - NTP daemon program - Ver. 4.2.4p4 I already found some forums where the problem is described: 1, 2, 3. Every time they edvise to upgrade nagios-plugins, because in version prior to 1.4.13 there was a bug with inserted leap second. But we have already newer version of nagios-plugins.

    Read the article

  • htaccess not properly rewriting urls

    - by Cameron Ball
    This is a bit of a weird one. I'm doing some work on a server, and I need rewrite rules for directories that actually exist (in some cases, they are more than one level deep) At the moment my .htaccess looks like this: RewriteEngine on RewriteRule ^simfiles/([-\ a-zA-Z0-9:/]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] And this is working OK, for example, a url like: mydomain.com/sifmiles/my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files Or in the case of a directory structure that is deeper than one level: mydomain.com/sifmiles/my-files/more-of-my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files/more-of-my-files I wrote the regex so that it won't match things with a . in the path, because there are css and js files which reside in simfiles/somedirectory, and if I redirect everything then these cannot be loaded. I tried a configuration like this: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^simfiles/([-\ a-zA-Z0-9:/\.]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] But that doesn't work, things still don't load properly. So my first question is, how can I achieve this "properly"? I don't like my solution because it means redirects won't occur if the folder has a . in its name. My second problem, is that while the redirection is happening properly, the url becomes: http://mydomain.com/?portal=simfiles&folder=my-files I want the URL to remain clean, like: http://mydomain.com/sifmiles/my-files How can I achieve this?

    Read the article

  • Setup site folders on Apache and PHP

    - by Cobus Kruger
    I'm trying to set up my first Apache server on my Windows PC at home and I have real trouble finding out which configuration settings go where. I downloaded and installed XAMPP which seemed to get everything nicely set up and can see a working website on http://localhost. So far so good. The point of this is to develop a website of course, and to make my life easier (irony?), I wanted to let the web site root point to my Eclipse project folder. So I opened httpd-vhosts.conf, uncommented a VirtualHost block and changed its DocumentRoot to my local path. Now when I try to load http://localhost I get a 403 (Access denied) error. So where do I configure permissions for my folder? And is that all I need to let my site run from the folder specified or am I going to have to clear another hurdle? Update: I tried to simplify things a little, so I reinstalled XAMPP and got back to a working http://localhost. Then I confirmed that httpd-vhosts.conf is included in httpd.conf and made the following changes to httpd-vhosts.conf: Uncommented the line NameVirtualHost *:80 Added a virtual host shown below. Restarted Apache and saw the expected page on http://localhost <VirtualHost *:80> DocumentRoot "C:/xampp/htdocs/" ServerName localhost ErrorLog "logs/dummy-host2.localhost-error.log" CustomLog "logs/dummy-host2.localhost-access.log" combined </VirtualHost> I then created a new folder named C:\testweb, added an index.html file and changed the DocumentRoot line shown above. For all intents and purposes I would then expect the two configurations to be equivalent. But this setup gives me an error 403. Even though the C:\testweb folder already had the same permissions as the C:\xampp\htdocs folder, I then went further and gave the Everyone group full control of C:\testweb and got exactly the same problem. So what did I miss?

    Read the article

  • Can IIS (Ideally Azure) do SSL Proxying?

    - by Acoustic
    My team has been asked to add a new feature to a project we're working on, and none of can find authoritative details on whether it's possible with Windows/IIS. The short of it is that we're hoping to have customers update their DNS with a CNAME record to point their website to our server instead of theirs (they why's are trivial - it's what the app does on behalf of your site). We're using a reverse proxy with several custom modules to serve particular content from the original servers. So far everything works perfectly until we encounter SSL. Is there a way to have IIS serve up an SSL certificate from another server? In other words, is there a way to be a trusted man in the middle? I'm hoping that's possible so that we don't have to require all our clients to re-issue their SSL certs. Frankly, we don't want to have to manage hundreds of certs. I'd also like to avoid a UCC situation if there's a way to because it seems to require re-creating the cert each time a client is added. So, any pointers on proxying/hosting SSL (or even dynamic SSL hosting like http://www.globalsign.com/cloud/) would be appreciated.

    Read the article

  • NFS4 permission denied when userid does not match (even though idmap is working)

    - by SystemParadox
    I have NFS4 setup with idmapd working correctly. ls -l from the client shows the correct user names, even though the user ids differ between the machines. However, when the user ids do not match, I get 'permission denied' errors trying access files, even though ls -l shows the correct username. When the user ids do happen to match by coincidence, everything works fine. sudo sysctl -w sunrpc.nfsd_debug=1023 gives the following output in the server syslog for the failed file access: nfsd_dispatch: vers 4 proc 1 nfsv4 compound op #1/3: 22 (OP_PUTFH) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsv4 compound op ffff88003d0f5078 opcnt 3 #1: 22: status 0 nfsv4 compound op #2/3: 3 (OP_ACCESS) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsd: fh_verify - just checking nfsv4 compound op ffff88003d0f5078 opcnt 3 #2: 3: status 0 nfsv4 compound op #3/3: 9 (OP_GETATTR) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsd: fh_verify - just checking nfsv4 compound op ffff88003d0f5078 opcnt 3 #3: 9: status 0 nfsv4 compound returned 0 nfsd_dispatch: vers 4 proc 1 nfsv4 compound op #1/7: 22 (OP_PUTFH) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsv4 compound op ffff88003d0f5078 opcnt 7 #1: 22: status 0 nfsv4 compound op #2/7: 32 (OP_SAVEFH) nfsv4 compound op ffff88003d0f5078 opcnt 7 #2: 32: status 0 nfsv4 compound op #3/7: 18 (OP_OPEN) NFSD: nfsd4_open filename dom_file op_stateowner (null) renewing client (clientid 4f96587d/0000000e) nfsd: nfsd_lookup(fh 28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba, dom_file) nfsd: fh_verify(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsd: fh_verify - just checking nfsd: fh_lock(28: 00070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) locked = 0 nfsd: fh_compose(exp 08:01/22806529 srv/dom_file, ino=22809724) nfsd: fh_verify(36: 01070001 015c0001 00000000 9853d400 2a4892a5 4918a0ba) nfsd: fh_verify - just checking fh_verify: srv/dom_file permission failure, acc=804, error=13 nfsv4 compound op ffff88003d0f5078 opcnt 7 #3: 18: status 13 nfsv4 compound returned 13 Is that useful to anyone? Any hints on to debug this would be greatly appreciated. Server kernel: 2.6.32-40-server (Ubuntu 10.04) Client kernel: 3.2.0-27-generic (Ubuntu 12.04) Same problem with my new server running 3.2.0-27-generic (Ubuntu 12.04). Thanks.

    Read the article

  • Troubleshooting certificate issues

    - by Weezy
    I'm trying to access my (European Parliament) Webmail from a Linux/Firefox machine at the following address and I get security warning messages explaining that the identity of the site cannot be verified (the error message is in french). But this only happens with Linux/Firefox from one machine. Here's the address: https://webmail.europarl.europa.eu/ (and I'm trying to access it from my home, not from the EP). And here's the detailed error message: webmail.europarl.europa.eu utilise un certificat de sécurité invalide. Le certificat n'est pas sûr car l'autorité délivrant le certificat est inconnue. (Code d'erreur : sec_error_unknown_issuer) So basically, if I translate, it is telling that the webmail.europarl.europa.eu certificate is invalid because the authority that delivered the certificate is unknown. I do only get this invalid certificate thing on Linux/Firefox. From a MacBookPro running Safari, I go to what looks like the correct webmail login page. From the same Linux machine, but using another user account and Chrome instead of Firefox, I go to what looks like the correct webmail login page. So there are several possibilities, here are a few ones: Firefox is right and my Linux box has been hacked Firefox is right and detecting something that neither Chrome nor Safari is detecting (like, say, my router that may be hacked) Safari on the MacBook Pro and Chrome on Linux are both correct and it is just Firefox on Linux that is wrongly stressing me when everything is normal. How do I know which one of these possibilities (or any other) is correct? How can I troubleshoot what is going on with either Linux/Firefox or with the parliament's webmail?

    Read the article

  • I must clear my cmos to be able to boot

    - by Fredou
    I have this Asus p7p55d-e pro for about 8 months(got it last July) and for this last 3-4 days I cannot boot without clearing my CMOS what I have is: Seasonic M12D 750W ASUS P7P55D-E Pro Intel Core i5 760 Quad Core Processor Lynnfield LGA1156 XFX GeForce® 8800 GT Alpha Dog 512MB DDR3 Standard (PV-T88P-YDF4) 2x Corsair XMS3 CMX4GX3M2A1600C7 4GB DDR3 2X2GB DDR3-1600 CL 7-8-7-20 I tried to remove all the unnecessary stuff: HD/dvd/pci card/usb cable/etc I tried with only 1 dimm filled, instead of my 4, each one individually it didn't work I tried changing the battery, here goes a few dollars to nowhere, didn't work if I don't reset the CMOS it sometime stock on RAM led, sometime on BOOT DEVICE led, when this happen, it stuck on CPU speed detection when I boot right after the reset, i MUST click on the F2 option (boot with default bios setting) if i go into the bios and save/restart, i have to reset it again when booted, everything is rock solid stable, tried memtest, cpu stress, etc, etc. without issue what should be my next step? trying a new psu? (i need to find one..) doing rma? (i need this mb since it's my only computer...) something else?

    Read the article

  • After update, suddenly lost ability to access Windows Server 2008 R2 shares from Windows XP clients

    - by Knute Knudsen
    Today I lost the ability to see my Windows Server 2008 R2 shares from any of my 3 Windows XP machines in my small office. The 5 Win7 machines haven't been affected (they are still able to browse/access the 2008 server), but none of my WinXP machines can access the 2008R2 server anymore. Yesterday (and for the previous year) everything was working fine. I do not have a domain setup. I can still access Win7 shares from WinXP clients. Browsing the server logs, I see that the following update was installed last night: > Installation Ready: The following updates are downloaded and ready for > installation. This computer is currently scheduled to install these > updates on ?Thursday, ?November ?15, ?2012 at 3:00 AM: > - Security Update for Windows Server 2008 R2 x64 Edition (KB2761226) > - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2729452) > - Windows Malicious Software Removal Tool x64 - November 2012 (KB890830) > - Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 R2 x64 Edition (KB2761451) It seems likely that something was changed in last night's update, but so far I haven't seen anything on microsoft.com to prove it. I did hear that XP is reaching the end of the road soon. Any ideas?

    Read the article

  • How do I host multiple independent, secured SharePoint sites (WSS 3.0) without using Active Directory on the same server?

    - by Kyle Noland
    I have a SharePoint site set up on one of my networks to service Active Directory users. To be clear, this is a Windows SharePoint Services 3.0 installation running on Windows Server 2003 Standard. It is not an option to upgrade the server or SharePoint version. Management would like to create several new sites, one for each of a handful of clients. These sites will be used like "dropboxes" or FTP sites so that my company can make large files available to outside contacts, and vice versa. Here are my requirements: I do not want to have to create Active Directory accounts for each external contact. If possible, I would like to store the external usernames and passwords in a database that I can write a small GUI for so that management can handle adding their own external contacts. Each client site must be sandboxed from each other and from my main company SharePoint site. I would like to keep everything running on port 80 and be able to access the sites as either clientname.mycompany.com or www.mycompany.com/clientname If anybody has ever done this I would really appreciate hearing about any lessons you learned and suggestions for how to set this up. Kyle

    Read the article

  • Restoring open software after a restart event in windows

    - by Doltknuckle
    I find that at the end of a long day, I sometimes have a large number of programs running. All which I will need to use tomorrow. Normally, this isn't an issue, I can simply lock the machine and come back tomorrow. My problem arrises when windows update launches in the middle of the night and force restarts my computer. That in turns closes all my open software. I of course save everything regularly so I don't loose anything, but I waste time reopening all of those resources whenever there is a restart. [EDIT] I should clarify that I still want to be able to restart my computer when an update comes down. Preventing the restart only delays the problem until later. I should have been more specific in that I want to be able to recover my working environment after a restart for any reason. Things like scheduled maintence, power loss, updates, and software installs. [EDIT] I can't simply have them setup to launch at startup becasuse those files change from week to week. So I need something that monitors what I have open, and gives me the option to "recover" those software sessions when I log back in. Anyone have any suggestions on what I can do? I'd even be willing to purchase software to do this for me if that is the only option. Thanks

    Read the article

  • Juniper router dropping pings to external interface

    - by Alexander Garden
    My organization has a Juniper SSG20-WLAN that routes our traffic to the outside world. We've been having intermittent problems with our internet connection so I wrote up a Python script to ping the internal interface of the router, the external interface, a couple of our internal servers, the ISP router our router talks to, their upstream provider, and Google and Yahoo for good measure. It does that about every minute. What I have found is that when our internet goes out, our Juniper router ceases responding to pings on the external interface. Everything past that is, of course, unreachable. The internal interface and our internal servers continue to echo back without interruption. None of the counters indicate dropped packets of any type. They all look normal. The logs complain about VIP servers being unavailable but otherwise nothing indicative of network issues. My questions are these: Does this exonerate our ISP? Or, contrawise, might a problem with the connection be causing the external interface to go down? Is there somewhere else in the SSG20, beside the system log and counters, that might help me track down info on the problem? UPDATE: Turned out that one of the switches between my monitoring box and the router was a router itself, and occasionally diverting from the gateway to itself. Kudos to those who made suggestions along those lines. Not really sure which answer to mark as accepted, as it was really stuff in the comments that turned out to be right. Thanks for the suggestions.

    Read the article

  • Lost partition after restarting

    - by nxhoaf
    I have Window 7 Professional Service pack installed in my Laptop Lenovo Thinkpad t420. After formatting the disk, and install Window 7 (detailed as above), I went to Computer -- Manager -- Storage -- Disk Management to split my 300gb C partition into 2 partition: C (which is 162gb) E (which is 140gb) Is work fine for about 2 days. Today, when I turn on my computer, I'm very suprise that the E partition is disappear. I can surely confirm that I didn't do any stupid thing yesterday. And before I shut down my computer, everything was fine. In general, here is what I did during the last today (from the point that I formatted the disk, and installed Window) Format 300gb hard disk Install window 7 Install eclipse, db2, .... ( I'm a developer) Install some other tools (Open office, Skype...) Install PGP (http://www.symantec.com/encryption) <--- I'm forced to used that due to my company policy Use Computer -- Manager -- Storage -- Disk Management to split my 300gb C partition into 2 partition as described above. It worked quite well for two last days. Until day... Can you please help me to recover my lost partition ? Thank you! For more info, here is my partition info: You can also see the image here

    Read the article

  • Can't connect to Sql Server 2008 named instance

    - by eidylon
    I just installed Sql 2008 Express on a new server running Windows Server 2008. I know Sql is working properly, because I can connect to the db fine locally, on the server. I cannot connect to it from a client machine though, neither by IP address nor by machine name (iporname\instance). I know I have the correct IP address, because I am RDCing into the server to perform all this configuration and setup, and if I ping the server name, it is resolving to the correct IP address as well. On the server, I have set up an inbound firewall exception allowing all traffic on any port on any protocol to sqlservr.exe. In SSMS, in server > Properties > Connections Allow remote connections to this server is enabled. In Sql Server Configuration Manager, TCP/IP is enabled in both the Protocols for <instance> and the Client Protocols sections. I looked in the Windows logs, but don't see anything about connections being denied or dropped. As far as I can see, I have everything set right, but cannot connect from a client machine. The client CAN connect to other Sql 2008 Express servers okay, so I know the client configuration is correct. Any ideas where else I can look for info of what/where/how this connection is dropping, greatly apprecaited! The error being returned by the client is: **TITLE: Connect to Server** Cannot connect to [MY.IP.ADD.RSS]\[MYINSTNAME]. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)

    Read the article

  • No Outbound Internet on Windows Home Server

    - by Kyle B.
    Could someone provide some steps for me to check my internet connection on my Windows Home Server? It seems to have intermittent connectivity issues and I am unsure of how to diagnose the problem because it is a headless (no monitor, no keyboard) machine so the only way to get to the device is via remote desktop (which works fine). When connected to the machine, it doesn't pull up any microsoft.com sites and some other sites it does pull up (i.e. gmail.com) and some it doesn't (stackoverflow.com). To make matters more complicated, it has worked intermittently in the past for reasons unknown. Are there tools I can use to properly diagnose the reason for the connection failure? I can ping 127.0.0.1 just fine, I have internet working on my other router-connected machines, so I'm not sure why this one would fail. Any suggestions would be much appreciated and up-voted :) ** edit - thanks for suggestions guys, I'm going to try these tonight and will update my post. ** edit #2 - I hoping this is a more permanant fix, but I have both changed my port on the router as well as restarted the router at the same time. The internet (for the moment) appears to be working. I will be sure to try everything we have discussed should this problem persist. Thanks, Kyle

    Read the article

  • Make dhcp assign same IP and hostname for different interfaces at one machine

    - by Egeshi
    I have a feeling that question itself looks stupid but it is not. Please let me clarify. I have dynamic DNS with BIND and NIS configured at my LAN and have laptop which I am using in both wireless and wired mode. I mean that sometimes I have to use wired interface to achieve higher throughput but most of time I don't need it and using wireless mode. Everything works great. Issue is that I want both interfaces get same IP from DHCP. Just for convenient firewall setup. If I add both hosts to dhcp in this manner # bt wireless host bt { hardware ethernet 00:1f:1f:62:60:28; fixed-address 172.16.77.110; } # bt wired host bt { hardware ethernet 00:14:22:b7:5a:de; fixed-address 172.16.77.110; } DHCP says logs following message dhcpd: Dynamic and static leases present for 172.16.77.110 dhcpd: Remove host declaration bt-wired or remove 172.16.77.110 dhcpd: from the dynamic address pool for 172.16/16 Host records are added outside of any subnet, but it makes no difference if I put them there, effect is still the same. This is not critical but either is not my whim because even if DHCP seems to work fine for that "bt" host, I cannot make connection TO it from remote machine anymore with this definitely incorrect DHCP config. I'd be thankful if one spares a minute for advice about how to configure DHCPD correctly. UPDATE. I realize that there's a soulution to assign different hostname in DHCP config but would like to use benefits of short host names.

    Read the article

  • How can ICS in Windows 7 be managed via command line, scripts, config files, etc.?

    - by Skya
    I've been using ICS successfully for years, but now I'm looking for a way to control it through something else than the GUI in Control Panel\Network and Internet\Network Connections - Connection Properties: I want to do everything that the encircled checkbox does, without touching the GUI. But what does the checkbox do? Microsoft don't provide specific information and the most helpful forum post I've found is from 2003. Assuming that some of the advice is still valid, I've come to the conclusion that ICS is broken down into 6 parts that have to be set up individually: the sharedAccess service interface settings firewall rules a static route dnsproxy autodhcp I've already learned that the service can be started/stopped with the command net start/stop sharedAccess and that netsh is a good tool for changing the interface settings and the firewall rules. But I don't understand how ICS handles routing and DNS. All hosts in my network are configured statically, so I don't care much about autodhcp. Thanks for your help! EDIT: I've spent the whole day scanning through ProcMon and I've seen reads/writes to both the registry and the filesystem and it is difficult to determine what parts of it actually make ICS work. I'm trying to look for an API instead. I'm looking into this right now, but I still want to know more about the inner workings.

    Read the article

  • Routing WIFI and LAN for specific traffic

    - by jakebird451
    I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing. EDIT: If I currently have been trying: sudo route flush sudo route add default 192.168.19.1 This gets everything to work for about a minute. But after such minute it "forgets" the routing to WiFi while retaining LAN's (en0) routing. If I unplug and replug my LAN (en0) cable, the process works for another minute.

    Read the article

  • Adding PHP to Apache

    - by user528451
    Where I work, we use ancient technology that belongs in a museum. Further I have to get everything done through system admins. They are telling me in order to get PHP, they will need to upgrade the operating system as well as the Apache version. lcas100[67]% uname -a Linux lcas100 2.6.9-11.ELsmp #1 SMP Fri May 20 18:26:27 EDT 2005 i686 i686 i386 GNU/Linux lcas100[68]% cat /etc/*-release LSB_VERSION="1.3" Red Hat Enterprise Linux AS release 4 (Nahant) lcas100[75]% /ots/apache/bin/httpd -v Server version: Apache/1.3.31 (Unix) Server built: Nov 3 2004 18:47:31 This doesn't make sense to me because apparently Apache 1.3.x supports PHP: http://php.net/manual/en/install.unix.apache.php Furthermore, we have another machine that runs PHP and is running the exact same OS and OS version. The reason I want it on the former machine is because it is mounted on a different file system. Lastly they tell me that all software the Apache webserver runs will need to be reinstalled/recompiled (assuming an Apache upgrade WAS needed). I am not even sure about this. Are they full of it? Thanks

    Read the article

  • I keep losing wireless connection

    - by posfan12
    I have a WRT54GL v1.1 wireless router and a WUSB54G v4 wireless adapter, both made by Linksys. The router is in the living room by the TV and the my computer is in the bedroom. My ISP is Brighthouse. Operating System Microsoft Windows 7 Home Premium 64-bit SP1 CPU Intel Core 2 Duo E6600 @ 2.40GHz 36 °C Conroe 65nm Technology RAM 3.00GB Single-Channel DDR2 @ 333MHz (5-4-4-14) Motherboard eMachines EMCP73VT-PM (CPU 1) 26 °C Graphics ASUS VS247 (1920x1080@60Hz) 767MB GeForce GTX 460 (nVidia) 43 °C Hard Drives 466GB Seagate ST350041 8AS SCSI Disk Device (SATA) 35 °C Optical Drives HL-DT-ST DVDRAM GH41N SCSI CdRom Device Audio High Definition Audio Device The problem is that my Internet connection will work fine for 15 minutes or so. Then the data will just stop flowing. Windows says I am still connected, and the systray icon still shows five bars. But Comodo Firewall will stop showing up and down traffic, and another of my systray applications complains about a lack of connection. What I usually do is either disconnect from the network manually, or unplug and re-plug the USB adapter. At which point the connection will work properly for another 15 minutes. I've tried unplugging my router for 30 seconds and letting it reboot. I've also tried looking for a newer driver for my adapter but I seem to have the latest version 3.1.3.0. This is a recent problem starting about a week ago. For the previous several months things were working just fine. I haven't made any changes to my system that I am aware of. The only thing I did was open my case to blow the dust out of it, then put everything back together. How do I fix this issue?

    Read the article

  • Stream video file in debian?

    - by Rob
    I've tried ffserver with ffmpeg, I've tried VLC, and I'm not sure what else to try or what I've done wrong. I've gone through, with VLC +-[ robert@s10 ]--[ ~ ] +[#!]¬ vlc --version VLC media player 2.0.0 Twoflower (revision 2.0.0-0-g421a4fc) VLC version 2.0.0 Twoflower (2.0.0-0-g421a4fc) Compiled by buildd on biber.debian.org (Mar 1 2012 22:21:37) Compiler: gcc version 4.6.2 (Debian 4.6.2-14) This program comes with NO WARRANTY, to the extent permitted by law. You may redistribute it under the terms of the GNU General Public License; see the file named COPYING for details. Written by the VideoLAN team; see the AUTHORS file. and tried everything I could in the streaming section, but I can't get the stream to actually work. Looking around, apparently debian strips the encoders from the package? I want to do share some videos I've made with friends on IRC, and it would be easiest if I could just stream it so we can all watch at the same time and critique parts of it in real time. Has anyone done something similar? Linux s10 3.2.0-2-686-pae #1 SMP Tue Mar 20 19:48:26 UTC 2012 i686 GNU/Linux Basic home network, I am behind a NAT (192.168.1.*) and have dynamic DNS set up. That doesn't really matter too much, I can figure that out, but it's not even working locally. I have a file server set up and could just share the files that way, but I'd rather have everyone watching at the same time (or just about). Not worried about installing new packages or building something from source, that's not a big issue, just want to get it working. Big plus if I can do it from command line.

    Read the article

  • Change the Default Date setting in Word 2010

    - by Chris
    I am using Word 2010 and Windows 7. You know how when you start typing a date in Word it will automatically suggest what it thinks you want? Like if I start typing “6/29”, a little grey bubble will display “6/29/13 (Press ENTER to Insert)”. How do I get it so the bubble will display the year in a 4 digit format, such as "6/29/2013 (Press Enter to Insert)"? The below picture is how it looks when typing a date into Word. I have already gone to the Date & Time option under the Insert menu and the date format that I want is already selected. I think this is only for using quickparts anyway, so the date automatically updates when you open a document. The Region and Language settings under the Control Panel are correct as well. I thought at one point I found it somewhere under options, but I am sure I looked through everything many times and I can’t find it. I posted this exact question at the Microsoft website and someone replied: Go to the Windows Control Panel and click on Clock, Language and Region and then on Change the date, time, or number format and then modify the Short date format so that it is what you want to be used. So please don't suggest this again, because in my question I did say that I already tried this and it doesn't work, at least not for Word, in this situation. Thanks.

    Read the article

  • Issues installing new drivers

    - by Luke
    I have a Windows XP Home SP3 system that won't detect anything on USB. It works on Ubuntu Live (off USB), and the USB keyboard and mouse work in the BIOS. Physically speaking, I'm sure it's fine. I installed the SMBus drivers and the USB driver from the motherboard's website, adn that went fine. If I plug anything in, it can detect the type of thing it is (i.e. keyboard, mouse, flash drive, etc) and even the name sometimes (i.e. Microsoft 5 button mouse), but won't accept any drivers. I have tried putting the Windows CD in the drive, but that didn't help. I have scanned for viruses and CHKDSK with no issues, and ran a MemTest86 with no issues. I am limited to one PS/2 connection for inputs, so I'm using the keyboard and haven't tried WU yet. A colleague suggested trying a new USB controller, so I put in a PCI one that only had drivers for 9x on the CD, so I assume that XP has them built in. It goes through the Found New Hardware wizard, but never actually finds drivers. I have also tried running SFC /SCANNOW and System Restore. SFC just flashes and goes away, making me believe it may be a hidden virus somewhere, but everything else seems to work, including MSE. I have reason to believe it's just an issue with detecting hardware, since even the USB Controller card can't seem to find drivers, but it can detect WHEN a USB device is connected Anyone else run into this, or have a suggestion short of re-installing Windows?

    Read the article

  • How to force certain traffic through GRE tunnel?

    - by wew
    Here's what I do. Server (public internet is 222.x.x.x): echo 'net.ipv4.ip_forward=1' >> /etc/sysctl.conf sysctl -p iptunnel add gre1 mode gre local 222.x.x.x remote 115.x.x.x ttl 255 ip add add 192.168.168.1/30 dev gre1 ip link set gre1 up iptables -t nat -A POSTROUTING -s 192.168.168.0/30 -j SNAT --to-source 222.x.x.x iptables -t nat -A PREROUTING -d 222.x.x.x -j DNAT --to-destination 192.168.168.2 Client (public internet is 115.x.x.x): iptunnel add gre1 mode gre local 115.x.x.x remote 222.x.x.x ttl 255 ip add add 192.168.168.2/30 dev gre1 ip link set gre1 up echo '100 tunnel' >> /etc/iproute2/rt_tables ip rule add from 192.168.168.0/30 table tunnel ip route add default via 192.168.168.1 table tunnel Until here, all seems going right. But then 1st question, how to use GRE tunnel as a default route? Client computer is still using 115.x.x.x interface as default. 2nd question, how to force only ICMP traffic to go through tunnel, and everything else go default interface? I try doing this in client computer: ip rule add fwmark 200 table tunnel iptables -t mangle -A OUTPUT -p udp -j MARK --set-mark 200 But after doing this, my ping program will timeout (if I not doing 2 command above, and using ping -I gre1 ip instead, it will works). Later I want to do something else also, like only UDP port 53 through tunnel, etc. 3rd question, in client computer, I force one mysql program to listen on gre1 interface 192.168.168.2. In client computer, there's also one more public interface (IP 114.x.x.x)... How to forward traffic properly using iptables and route so mysql also respond a request coming from this 114.x.x.x public interface?

    Read the article

< Previous Page | 500 501 502 503 504 505 506 507 508 509 510 511  | Next Page >