Search Results

Search found 19279 results on 772 pages for 'everything'.

Page 508/772 | < Previous Page | 504 505 506 507 508 509 510 511 512 513 514 515  | Next Page >

• needing storage integrity (write/read) test - for BASH

  - by Mr. Bash

  In need of shell scripts / bash commands to verify data integrity of local harddrives, usb-drives, etc, ... Like the famous www.heise.de/download/h2testw; or something that is at least common within repositories. (h2testw writes a specific datastring over and over onto the medium, then reads it again to verify if it was written correctly and displays write/read time/speed.) please no dd if=/dev/random of=/dev/sdx bs=1k && dd if=/dev/sdx of=/dev/null bs=1k since it won't verify if everything was written correctly. It is only a test if read/write is successful to the device. So far, I'm not too happy with badblocks -w -v /dev/sdx1 either, since it seems rather slow and I don't know what it exactly writes, and if it considers wear-leveling on flash media. There is also a program named F3 http://oss.digirati.com.br/f3/ that needs to be compiled. Designed after h2testw, the concept sounds interesting, i'd just rather have it as a ready to go bash script.

  Read the article

• Squid Authentication & streaming

  - by Steve Butler

  I've got squid setup using Kerberos authentication. I'm also using squidguard as an URL redirector to block out the usual nastiness of the web. There are some sites though that we allow certain users to, and others not. This all works well, assuming I'm not using any streaming. From what i can determine from the squid logs and the wireshark traces I've done, when the initial request to stream is sent, everything is good, the authenticated username is sent with the request to squidguard. The problem is that on subsequent traffic the username is not sent to squidguard, causing it to be blocked based on default policy. I've tried using the squid built-in allow/deny stuff, but its relatively clunky, and so far squidguard has been pretty easy and fast. Here comes the question(s): How do i get Squid to pass username on all requests? (something tells me this isn't the best way) How do i get squidguard to see traffic is authenticated to a specific user even when a username isn't passed? Is there any other way of accomplishing this? A few details that may be of importance: I'm using a list of users stored in a text file for squidguard to compare against. I'm using full kerberos auth with Squid. CentOS 6.0 Squid 3.1.4 Squidguard 1.3

  Read the article

• Outlook express 6 crashes after "synchonizing account"

  - by Ira Baxter

  [EDIT: Revised OE version to match reality] I use Outlook Express (OE) 6.00.3790.3959 to read newsgroups. I regularly scan through about 100 newsgroups. When I select a newsgroup, and then select "synchronize account", OE goes through the newsgroups visibly updating the unread message count. It gets apparantly to the end, and then comes back to check for Watched Conversations, of which I typically have a few scattered across the newsgroups. It invariably crashes with some kind of access fault. A dialog box pops up saying "Want to debug with "; I invariable say No, and the process goes away. I restart OE, select the newsgroup, and skip "Synchronize Account"; I am able to read news and everything seems just fine. This behavior has occurred since I set it up several months ago. Is the newsgroups database screwed up? Can I run something like CHKDSK or Outlooks PST repair to fix things up? Any suggestions as to what to do? The system is Windows XP 64 system installed in January 2008. I accept Windows Updates and install them on a regular basis. I use Outlook (not OE) for regular email an it behaves perfectly normally.

  Read the article

• HaProxy - Http and SSL pass through config

  - by Bill

  I've currently got an HaProxy LB solution in place and everything is working fine however we are having an issue with a very few clients who cannot get to our site via HTTPS (SSL) they can browse our site in Http but as soon as they click on an absolute HTTPS link they are taken to our home page instead. Wondering if anyone can look at our config below and see if there's something awry. I believe we are on HaProxy 1.2.17 global log 127.0.0.1 local0 log 127.0.0.1 local1 notice #log loghost local0 info maxconn 6144 #debug #quiet user haproxy group haproxy defaults log global mode http option httplog option dontlognull retries 3 redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 stats auth # admin password stats uri /monitor listen webfarm # bind :80,:443 bind :443 mode tcp balance source #cookie SERVERID insert indirect #option httpclose #option forwardfor #option httpchk HEAD /check.cfm HTTP/1.0 server webA 111.10.10.1 #server webB 111.10.10.2 server webB 111.10.10.3 server webC 111.10.10.4 listen webfarmhttp :80 mode http balance source # option httpclose option forwardfor # option httpchk HEAD /check.cfm HTTP/1.0 option httpchk /check.cfm server webA 111.10.10.1 #server webB 111.10.10.2 server webB 111.10.10.3 server webC 111.10.10.4 listen monitor :8443 mode http balance roundrobin #cookie SERVERID insert indirect option httpclose option forwardfor #option httpchk HEAD /check.txt HTTP/1.0 #option httpchk HEAD /check.cfm HTTP/1.0 server webA 111.10.10.1 server webB 111.10.10.2

  Read the article

• Windows Server 2003 with Apache and IIS causing random faulting and performance issues with Apache?

  - by contrebis

  I'm trying to fix a problem on a Windows Server 2003 SE install which is running IIS6 and Apache webserver (with PHP and MySQL). IIS sites are bound to one IP, Apache to the other. Everything seemed fine till the other IP address was installed to allow a webservice to run under IIS. Symptoms: Apache now responds very slowly, even requests for static files (often 30 seconds or more) Sporadic errors are appearing in the event logs like: Faulting application httpd.exe, version 2.2.14.0, faulting module php5ts.dll, version 5.2.13.13, fault address 0x000ac14f. I've double-checked the config files, taken account of this question/answer http://serverfault.com/questions/51230/running-iis-and-apache-on-the-same-windows-server, upped the Apache log level to debug, run TCPView to check for conflicting bindings, upgraded to latest Apache/PHP versions but still no success or indication of a cause. Any suggestions on where to look, or debugging tips would be gratefully received. I'm a web programmer so not so familiar with Windows Server admin or details of the networking stack. Running PHP under IIS is not an option and hosting on another server is non-ideal.

  Read the article

• Correcting owner/permissions on damaged directory tree in linux

  - by mcs130

  I inadvertently made a backup copy of a directory recursively and forgot the -a (--preserve) switch when doing so. This damaged my backup directory (which contains data we need to access). The directory and all of its child folders and files comprise an installation of an application including postgress DB and solr files. The original copy was used to for a failed re-config attempt. Now I need to use the backup copy to start over, only the ownership of the backup copy is now root across everything and it is no longer usable (processes won't run due to ownership problems I created when I forgot the -a on the cp -r). I've re-installed a clean copy of the application into a 3rd location now (which has the correct owner/perms) and need to copy the owner/perms from this good directory over onto the damaged directory. What is the best way (if even possible) to do this. (I've Googled and seen things from perl scripting to setfacl/getfacl to do this but am unfortunately still confused). Apologies if this seems a dumb question. Thanks.

  Read the article

• Replacing local home server with VPS: Suggestions?

  - by CamronBute

  So right now, I'm running an old box with a 2TB HDD in it. I use this as a file server for the home network, as well as a box for downloading large files which are synced via Dropbox. Lots of other tinkering things, too. Basically, I'm sick of paying extra for the power and having to worry about drive failures and whatnot. I'd rather get a remote server, let someone else manage it and provide access from the Internet. So, I've been looking for a Windows VPS that would give me access to install things and tinker, and I'm having a problem finding a host that offers more than 100GB of hard drive space. If they do offer a package with 100GB of storage, everything else is waaayyyy more than what I actually need. The idea is to create a permanent VPN connection from the cloud server to my home network to provide a transparent solution so I'm not having to go to lengths to transfer files or whatnot. I think a VPS solution will allow me to do this. I would like 1TB of storage space, minimum 100Mbps Internet connection, minimum 250GB bandwidth, admin access. Anyone have anything? Or am I being unreasonable? If I am, why?

  Read the article

• Wireless router blocking some sites while using ethernet is fine

  - by Micke

  I'm using Windows 7 and my router is a wireless Apple Airport Express that is approximately two years old. Suddenly I can't access some sites (for example www.sthlm.friskissvettis.se, or www.vegetarian-shoes.co.uk, some streamed tv-shows on svtplay.se, and a number of other random sites) when connecting to internet with my router. It worked good until recently and I'm fairly sure this problem emerged when my ISP upgraded from 10/10mbit to 100/10mbit speed. Most other sites like facebook and google works fine. When using my network cable to connect to internet everything works fine and I can access these sites. Firmware is current and I've tried reseting the router to factory defaults. Tried different browsers, and I can't ping the "blocked" sites either. Tracert www.sthlm.friskissvettis.se starts with 10.0.0.1 and continues through a number of long addresses until it says timeout. The last working address before timeout was sth-tcy-ipcore01-ge-0-2-0.neq.dgcsystems.net [83.241.252.13], if it matters. Tracert www.vegetarian-shoes.co.uk also eventually gives me a timeout. When the network cable is plugged in, I still get timeout on tracert www.sthlm.friskissvettis.se even though I can access the site in Chrome. Weird. www.vegetarian-shoes.co.uk doesn't give me a tracert timeout when the cable is plugged in, and I can access the site as usual. I've tried changing DNS servers to use opendns servers instead, but to no use. I've tried pinging these two sites with a lower MTU packet size (with this method: http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-or-windows-7/), but still can't access them through ping... I don't know what to do anymore.... any suggestions???

  Read the article

• NAT ports - how do they work?

  - by Davidoper

  I have the following network schema: Computer A: three nics: NIC 1 (eth0): dhcp, public internet NIC 2 (eth1): static 192.168.1.1, gateway for Computer B NIC 3 (eth2): static 192.168.2.1, gateway for Computer C Computer B: static 192.168.1.2, using gateway 192.168.1.1 (NIC 2). Computer C: static 192.168.2.2, using gateway 192.168.2.1 (NIC 3). So I applied this to get NAT working: iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE Every computer can connect to the internet now. I have been applying rules to the main computer (Computer A), like dropping connections to some ports, e.g ssh: iptables -A INPUT -p tcp --dport 22 -j DROP But for instance, now I would like only allow connections for ports 20,21,22,53 and 80 in Computer C, and ignore the outside traffic if it's not related to those ports. The allowed connections should be FROM Computer C to outside, but not from outside to Computer C (I mean - Computer C is not hosting any HTTP or SSH, but it is going to use them as a client). I guess this sould be done like this: iptables -A OUTPUT -i eth2 -o eth0 -p tcp --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth2 -o eth0 -p tcp --sport 21 -m state --state ESTABLISHED -j ACCEPT The last rule (dropping any other traffic different from those) is at the end of the configuration, so -A should be working correctly. The thing is... it is not working. If I put the last rule like this: iptables -A FORWARD -i eth2 -o eth0 -j DROP It just drops everything and, for instance, port 21 (previously opened as you can see above) is not either working. Can you tell me what could I have done wrong? I have been struggling with this problem for some time and I am unable to solve it. Thanks!

  Read the article

• Load Testing a Security/Gateway Appliance

  - by Joel Coel

  In a couple weeks I will load testing a security/gateway appliance. We're a small residential college, and that "residential" means the traffic moving through the appliance is a bit like the Wild West. We have everything from Facebook to World of Warcraft, BitTorrent to Netflix, or Halo to YouTube... basically anything you might find in the home of a high-school or college aged person. Somewhere in there some real academic work gets done as well. We rely on our current appliance for traffic shaping, antivirus, malware filtering, intrusion detection on our servers, logging and abuse reporting, and even some content filtering. All this puts a decent load when we have students around, and I'm concerned about the ability of the new candidate to keep up. On paper it should handle things, but I'm worried. Prior experience is that vendors greatly over-report what an appliance can handle. The product also includes a licensed session limit, and I'm also worried that just a few misbehaving students could unwittingly bring us to that limit and cause service disruptions. I need to know this will work for our campus in order to commit to it. Going a performance level higher in that product takes the pricing way out of line with what we expect and have done in the past. What I need is a good way to load test this guy. My problem is that our current level of summer traffic is less than one percent of what it will be when students come back just six weeks from now. Any ideas on how to really stress this thing and see what it can do, in a way that will give me some clear ideas o. How that will scale for our campus? For the curious, I'm looking at a Watchguard 515, but it could be anything. If I were evaluating a competitor, I'd ask the same question.

  Read the article

• Confused about the Windows 7 Preinstallation Kit

  - by David Brown

  I build custom PCs and would like to use the Windows 7 Preinstallation Kit to make installation go a little quicker and customize the Windows image. However, since each PC is built to a particular customer's specifications, the hardware will rarely be the same. So, I would like to have a single answer file that will work for everything. I'm not sure if that's possible, however. What I mostly want to do for now is add my support information as well as pre-set anything that I would normally change after each installation completes. I have a Windows 7 Professional Upgrade DVD set (both 32-bit and 64-bit), but no OEM disks. I copied the Install.wim file to my local drive and opened it in the Windows System Image Manager, but it asks me to choose a catalog file specifically for each edition of Windows 7. Will this limit the answer file to whichever edition I choose? I would think choosing Starter would give me the most basic settings, which would apply to all other editions, but I'm not entirely sure of this. I don't intend to install any extra applications or drivers. I merely want to insert an OEM disk, my OPK USB drive, and have it work for whatever edition of Windows 7 I'm installing. If a large number of similarly-configured PCs need to be built, I'll go ahead and create a custom answer file in that case, but for a single machine order, that seems like overkill. In addition, do I need a separate answer file for 32-bit and 64-bit versions of Windows 7? Or will it work for both, even though I copied the Install.wim file from the 32-bit disk? Thanks!

  Read the article

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

• NATing IPv4 while routing IPv6

  - by Hugo

  I've the following setup: client(s) <---> (eth0) router (eth1) <---> wan I have a static IPv4 address and a /48 IPv6 address block. I need to connect all the clients to (wan). Each client will have it's own public IPv6. Meanwhile, I need to NAT those same clients over to (wan). Everything IPv4-related and the NAT are working fine. The IPv6 communication to/from (eth0)<-(clients) works fine, as does the IPv6 communication from (eth1)<-(wan) works fine. To provide IPv6 to all my clients, I've thought of too choices: Having the router as a gateway, which different IP on each interface. This sounds like I need to tell my ISP to route the entire block through that single IP, so it's not really an option. Transparently pass IPv6 packets to/from eth0<-eth1, so all clients can communicate with the upstream gateway (I would actually have a switch here if it weren't for the need to remain IPv4 compatible). So, since I've opted for the second choice, I'm in doubt: How can I pass all IPv6 traffic from eth0 to eth1 transparently? What I need is a level 3 bridge, but linux's bridgeutils create a level 2 bridge (which would bridge ipv4 as well, and I can't have that). This is a DD-WRT device, but it's pretty much an embeded linux, so most suggestions that would work on linux are welcome. Thanks.

  Read the article

• Graphics and USB devices freezing soon after OS loads

  - by Andrew

  I run Ubuntu/Windows dual boot. Last night I started the upgrade to Ubuntu 12.04, and my computer has not worked since in either Windows or Ubuntu. Here's what I got when I rebooted after the upgrade, and continue to get every time I boot: Gets to GRUB screen OK. Choose Ubuntu - black screen or crazy purple lines. At first I assumed something went wrong with the upgrade (often happens). Choose Windows - works fine, I log in, but soon after that the graphics freeze (sometimes with purple artifacts). The keyboard and mouse (both USB) also lose power at the same instant, and none of the USB ports have power to them. This happens sooner or later every time I boot. Update: the HDD also appears to lose power at the same point. I have tried a live CD, but my computer refuses to boot any CD even after disabling all other boot options in the BIOS. I have disconnected everything except keyboard, mouse, graphics card with one monitor, one RAM sick and HDD; no change. I also took the little battery out to reset CMOS. I am pretty sure no matter how wrong the Ubuntu upgrade went, it wouldn't cause the above symptoms in Windows. So the only explanation I can think of is that a hardware failure occurred at the same time. Some possible causes of this I can think of are: A couple of days before this, I added a third screen (which worked fine). About a week before, my house lost power in a storm (no ill effects over the past few days though). What can I do, other than buy a new motherboard/CPU and hope it works? Unfortunately I don't have another box to swap parts into to test at the moment.

  Read the article

• How to compare old CPU to new CPU?

  - by Lasse V. Karlsen

  I hope this question doesn't get closed at once :) I have an old laptop, a Compaq NC4200, which is going its final laps around the track these days. Battery is dead, and everything kinda runs slow. It also has only 1GB of memory, and even though I don't know if it can take more, I probably wouldn't be able to get hold of any that matches without having to special order it. The size, however, has been ideal for my usage pattern, so I'm looking to replace it with a similarly sized laptop, at least in the same size category. However, it's been a while since I tried keeping track of CPUs, so I have a question. The old laptop has a Intel Pentium M 760 1.86GHz processor. One laptop I found online has a Intel Pentium SU4100 1.3GHz dual-core. This type of processor seems to be quite common in the price and size-range I've been looking. What kind of relative performance boost could I expect from the old one to the new one? I am not expecting a "about 7.45x speed", but some indication would be nice. For instance, dual-core tells me it might be akin to 2.6GHz, but I assume I can't simply compare 1.86GHz to 2.6GHz and expect the new one to run about 1.4x as fast, I expect more these days. Or is that unrealistic for this kind of processor? Do I need to up my price range and go for a 2+ GHz processor?

  Read the article

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• Wordpress Directory Permission to allow uploads, plugin folders, etc

  - by user1015958

  I have a wordpress pre-made site which were developed on my localmachine, and i uploaded it too a vps running on debian6, using nginx, mysql, php. Following this guide: 1) Create an unprivilaged user, this could be say 'karl' or whatever, and make them belong to the www-data group. So that if I were to login as karl and create a web root in say /home/karl/www/ , all the files will be owned by karl:www-data 2) Set up nginx as the user www-data in nginx.conf 3) Set up PHP-FPM to run as www-data 4) Place your files in /home/karl/www/[domain name maybe]/public_html/, upload as 'karl' so you don't have to chown everything again. when i type ls -l inside public_html/ it shows that all the files inside are owned by karl:karl. But the public_html directory is owned by karl:www-data. I chmod 0755 the folder wp-content but i still get the error: ERROR: Path ../wp-content/connection_images does not seem to be writeable. I know i shouldn't set it too 777 due to security reason, how should i set it too proper permission? and what should i set also to allow my users to upload,write posts,edit articles? Sorry for my english by the way.

  Read the article

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• Best CPUs for speeding up compiling times of C++ w/ DistGCC

  - by Jay

  I'm putting together a distributed build farm with DistGCC to speed up our teams compile times and just looking for thoughts on which processors to use in the hosts. Are we going to get a noticeable decrease in time using 8 cores vs. 4-hyperthreaded cores? Big difference in time between i7 and Xeon? etc, etc. Just need advice from people who've put together kick-a build clusters. We've got a majority of the normal things to speed up builds in place (pre-compiled headers, ccache, local gigabit connections between them, tons of ram, etc) so please just give advice on the best processor to use. And money is a factor, but anythings doable if the performance increase is noticeable. Thanks. Jay EDIT: Although any advice IS welcome, please refrain from "Do this first" posts as we're not planning on skimping on things like SSD, maxed out RAM, etc. My personal system is a iMac Quad-core i5 with 8GB of RAM. When I build our project locally, my processor floats around 99-100% a majority of the time, which makes me assume it is a bottleneck, even if you made everything else faster. My ram on the other hand doesn't even get close to maxing out. It's also worth noting that I did research this, however every discussion I could find was primarily for gaming machines, which is obviously a different beast in usage. These machines won't even have monitors or anything but integrated graphics since they have one purpose: Build freakin fast. (hopefully)

  Read the article

• RRAS NAT not working on a certain computer

  - by legenden

  This is driving me crazy. I have a virtualized W2K8 server running RRAS. Every other computer or server on the network can access the internet through the NAT except one. On one server, it just won't work. I can ping the ip address of the NAT gateway just fine, and everything else works. (SMB, etc) DNS, which is hosted by the same server, also works just fine. I have even reinstalled the OS on the problem server and it still doesn't work. Recap of the steps I tried: There are 3 network cards in the server, I tried every one and different switch ports. Not a hardware problem. Reinstalled W2K8 R2 on server with the problem, didn't help. Tried the IP of the internet gateway directly - this did work (!). But I need NAT to work. All firewalls are disabled. Removed computer from domain, deleted computer membership in Active Directory Users and Computers and added it back. Disabled all other network adapters and set a static ip and specified the gateway ip manually. When I tracert a public IP, the first hop (or any other hop) comes up as: C:\>tracert www.google.com Tracing route to www.l.google.com [209.85.225.106] over a maximum of 30 hops: 1 * * * Request timed out. 2 * * * Request timed out. From a different computer, on which NAT works, the first hop comes up as: tracert www.google.com Tracing route to www.l.google.com [209.85.225.105] over a maximum of 30 hops: 1 <1 ms * <1 ms xxxx [10.5.1.1] This is the most bizarre problem I ever came across, and I realize that it's a long shot asking it here given all the details, but I'm pulling my hair out. Maybe someone has an idea...

  Read the article

• Referencing SQL Server 2008 R2 SMO from Visual Studio 2010

  - by user69508

  Hello. We read a number of things about referencing SQL Server SMO from Visual Studio but still don't have the definite answers we need. So, here it goes... A number of years ago we created a C# application using Visual Studio 2005 and SQL Server 2005. In that application, we added .NET references to a number of SQL Server SMO objects, and everything worked fine. Those references were: Microsoft.SqlServer.ConnectionInfo GAC 9.0.242.0 Microsoft.SqlServer.Smo GAC 9.0.242.0 Microsoft.SqlServer.SqlEnum GAC 9.0.242.0 We have now migrated to Visual Studio 2010 and SQL Server 2008 R2. However, when we try to reference those same SMO objects for SQL Server 2008 R2, they don't appear in the .NET references tab. We're wanting to reference the SQL Server 2008 R2 version of those same SMO assemblies for our upgraded C# application. On our development machines, we have SQL Server 2008 R2 Developer installed with all options, including the SDK such that the assemblies are found in C:\Program Files (x86)\Microsoft SQL Server\100\SDK\Assemblies. So, my first questions are: Are we supposed to do file references to the SMO assemblies instead of .NET references in Visual Studio 2010 w/ SQL Server 2008 R2? Or, is there some problem with our development machines such that the SMO assemblies are not appearing in the .NET references tab? Next, our production machines will have SQL Server 2008 R2 Workgroup installed with the client tools option selected, thus providing those same SMO assemblies in C:\Program Files (x86)\Microsoft SQL Server\100\SDK\Assemblies. So, the next questions are: When we release to production, are we supposed to redistribute the SMO assemblies with our application? Or, will our application work on the production servers without redistributing the SMO assemblies (since the client tools/SMO assemblies have been installed)? What else????? Thanks for the help!

  Read the article

• Cannot Delete Item "Could Not Find This Item" issue

  - by aronchick

  A friend sent a long a file (a .rar) he wanted me to check out for him before he installed it. I downloaded it and unrared it with no problems, but it was full of .exe's instead of the intended contents (fonts) so I advised him to delete it immediately and not use. I then proceeded to do the same, but the folder simply will not delete. Oddly the files went fine, and I never ran anything, but this is what I'm seeing: Could not find this item This is no longer located in C:\Users\This_User\Desktop. verify the item's location and try again. I've tried the following things with no help: Using "Unlocker" to Unlock and delete Using move on reboot and rebooting Using PendMoves (from sysinternals) and rebooting Elevating a cmd line, doing a dir /x to get the short name of the folder, and then del 'shortna~1' Moving the folder to a new folder and then trying to delete the parent folder I'm on Windows 7 RTM, very fresh install. Any thoughts? Update: Just to confirm, I've run Hijack this and half a dozen other malware detectors, and everything came back clean (no extra processes, no other obvious badness). Rebooting in safe mode didn't help either.

  Read the article

• Fix: Connections to SQL Server 2005 on Windows Vista suddenly stop working

  - by NTulip

  On my Vista machine at work, applications and the SQL Server Management Console work fine connecting to SQL Server 2005. Sometimes they are ok for weeks at a time, sometime for hours and then they stop connecting. I've tried everything to get it to work including the installation of SPII and running the user provisioning tool without any luck. The only way to fix it was to restart. The Error: Connections are refused with the standard error message: Cannot connect to SERVER_NAME\INSTANCE_NAME ------------------------------ ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 The Fix: Stop and restart the Sql Server Browser, Sql Server integration, SQL Server Active Directory Helper services. Works like a charm.

  Read the article

• Port translation in router causing some email to fail

  - by user22037

  We are in the process of setting up a spam filter (SAVASM). One change we are making is to push incoming email on port 25 through our spam filter/server but have users actually send their email on a different port. I am attempting to make this happen by using port address translation to send port 25 traffic to the SAVASM server IP. As a step in making this change I setup port translation without actually changing the IP addresses. The NAT rules for the email server went from one Static NAT rule with no port specified, to multiple Static NAT rules each with a port or group matching the Access Rules for that server (smtp, pop3, http, https, and some other custom ports). The problem we are running into is confusing. Some outgoing mail through this server is failing when the router has the multiple NAT rules with port translation settings. Email goes through fine FROM our email to our internal accounts and to Gmail. However email fails when FROM our client's email address TO our client's email or their personal Comcast. The only situation that worked for them was if they changed FROM to Comcast and then messages went through fine to both Comcast and the client's accounts. Switching back to regular Static NAT rule everything then worked for them. Does anyone have a clue as to what might be going on? We are on a Cisco ASA 5500 box.

  Read the article

• Split Tunnel VPN using incorrect Tunnel

  - by Brian Schmeltz

  Our company has a handful of field offices that have recently been setup with a regular internet connection after we removed the T1 and router that connected them directly to our network. Now, when the users are in the office, they log in to the VPN to be able to connect to the network. For the sake of them being able to print and scan from the local multi-function we have setup a split tunnel VPN. We currently have about 15-20 users using this setup around the country without any problems. Recently one of our users started having problems accessing internal programs/sites when connecting from both home and the office. There are three other users in the same office and they do not have this problem. I assumed that it was something with the computer and went ahead and replaced it with another of the same model. The computer worked fine in our home office; however, when the user received it, she had the exact same problem both at home and in the field office. Thinking it may be a NIC driver issue I sent her another computer, this time a different model, same problem occurred. If I update the host file to point to the correct paths, things will work, and if I connect via a normal VPN connection everything works, but the user cannot scan or print - which is a problem. Have tried to find ways to create another tunnel on a normal VPN and have tried to find ways to force the correct tunnel on the split tunnel VPN. It appears that there is something related to the ISP because if I connect to Comcast or Verizon it is fine but once she connects to Insite then she has problems. I have been unable to get any support from Insite as they don't feel the issue is with them. We use a Nortel VPN client. Any thoughts or ideas would be appreciated.

  Read the article

< Previous Page | 504 505 506 507 508 509 510 511 512 513 514 515  | Next Page >